The detection and elucidation of oligomers migrating from biodegradable multilayer teacups using liquid chromatography coupled to ion mobility time-of-flight mass spectrometry and gas chromatography-mass spectrometry

A study on the performance, structure, composition, and release behavior changes of polybutylene adipate terephthalic acid (PBAT) film during food contact

Polybutylene adipate terephthalic acid (PBAT) is an emerging biodegradable material in food packaging. However, concerns have been raised regarding the potential hazards it could pose to food safety. In this study, the changes of PBAT films during food contact and the release of small molecules were inestigated by a multiscale approach. On a macro-scale, the surface roughness of the films increased with the reduction in the concentration of food simulants and the increase in contact temperatures, especially after immersion in acidic food environments. On a micro-scale, the crystallinity (Xc) and degradation indexes (DI) of the films increased by 5.7-61.2% and 7.8-48.6%, respectively, which led to a decrease in thermal stability. On a scale approaching the molecular level, 2,4-di-tert-butylphenol (2,4-DTBP) was detected by gas chromatography-mass spectrometry (GC-MS/MS) with the highest migration content, and the release behavior of 2,4-DTBP was further investigated by migration kinetics. In addition, terephthalic acid (TPA), a hydrolysis product of PBAT, was detected in acidic food environments by liquid chromatography-mass spectrometry (LC-MS/MS). The results of this study could provide practical guidance and assistance to promote sustainable development in the field of food packaging.

Mass spectral characterisation of cyclic oligoesters in a biodegradable mulch film

RATIONALE

Plastic mulch film manages weed growth and moisture loss on the surface of cropping beds. The chemical components of such plastics include polymer(s), additives and non-intentionally added substances (NIASs). The unknown chemical nature and behaviours of these constituents require investigation due to their potential to add to the anthropogenic chemical burden in the agrifood system.

METHODS

Solvent extracts of a commercial 15% polylactic acid (PLA)/85% poly(butylene adipate-co-terephthalate) mulch film were investigated using gas chromatography-mass spectrometry (GC-MS) with electron ionisation to characterise the additive and NIAS components. The obscurity of some of the NIASs meant their identification was not readily achieved through routine MS library comparisons. As such, the identification of several polymer-derived compounds required interpretation of the MS data and re-application of the derived fragmentation patterns with reference to the wider literature. Unknowns were confirmed using commercially available compounds.

RESULTS

Unknown NIASs were identified as cyclic oligoesters comprised of the monomeric building blocks of the polymer system. Cyclic structures derived from the monomers of polybutylene adipate (PBA) and polybutylene terephthalate (PBT) fragmented through a primary pathway involving 1,5- and 1,3-H transfers at ester linkages. Characteristic ions at m/z 111, 129, 183 and 201 for PBA-derived cyclic oligoesters and m/z 104, 132, 149 and 221 for PBT-derived cyclic oligoesters were assigned in the mass spectra of unknowns. Cyclic oligoesters containing sebacate moieties were also identified, indicating the presence of polybutylene sebacate as an unexpected component of the mulch.

CONCLUSIONS

Systematic analyses of the sort reported here are valuable for providing alternative approaches for the identification of plastic-related chemicals. Open publication of MS spectral data is required to build a greater understanding of the mulch film chemical components contributing to the environmental chemical load introduced to agroecosystems.

Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

Mass Spectrometry-Based Techniques for the Detection of Non-Intentionally Added Substances in Bioplastics

The safety of food contact materials is a hot topic since chemicals can migrate from packaging into food, thus raising health concerns about and/or producing changes in the organoleptic properties of foodstuffs. Migration tests are required to demonstrate the compliance with current regulations and to investigate the transferred compounds. In this context, mass spectrometry is the analytical technique of choice for the detection and quantitation of both intentionally added substances, such as antioxidants, stabilizers, processing aids, and non-intentionally added substances (NIAS). Untargeted strategies represent a major analytical challenge, providing a comprehensive fingerprinting of the packaging material and migrating components, allowing for NIAS identification. Hyphenated mass spectrometry-based techniques have been devised for screening the presence of migrating contaminants and for quantitation purposes. Both low-resolution (LRMS) and high-resolution (HRMS) methods were screened, with a special emphasis on the latter because of its capability to directly characterize food contact materials with minimal/no sample preparation, avoiding chromatographic separation, and reducing sample handling, analysis costs, and time. Examples related to the migration of contaminants from existing or newly developed bioplastic materials will be discussed, providing an overview of the most used MS-based methods, covering the state-of-the-art approaches from 2012 up to 2022.

Ultra-high performance liquid chromatography coupled to ion mobility quadrupole time-of-flight mass spectrometry for the identification of non-volatile compounds migrating from 'natural' dishes

Although most new biomaterials for food industry applications are labelled '100% natural fabrication' and 'chemical-free', certain compounds may migrate from those materials to the food, compromising the organoleptic characteristics and safety of the product. In this work, the degree of compound migration from dishes made with four different biomaterials: bamboo, palm leaf, wood and wheat pulp was investigated. Migration tests were carried out using three food simulants, 10% ethanol (simulant A), 3% acetic acid (simulant B), and 95% ethanol (simulant D2). Unequivocal identification of non-intentionally added substances (NIAS) is challenging even when using high-resolution mass spectrometry techniques however, a total of 25 different non-volatile compounds from the migration tests were identified and quantified using Ultra-high performance liquid chromatography coupled to ion mobility quadrupole time-of-flight mass spectrometry (UPLC-IMS-MS). In the bamboo samples three oligomers, cyclic diethylene glycol adipate, 3,6,9,16,19,22-hexaoxabicyclo[22.3.1]-octacosa-1(28),24,26-triene-2,10,15,23-tetrone and 1,4,7,14,17,20-hexaoxacyclohexacosane-8,13,21,26-tetrone exceeded the specified limits of migration.

Safety of recycled plastics and textiles: Review on the detection, identification and safety assessment of contaminants

In 2019, 368 mln tonnes of plastics were produced worldwide. Likewise, the textiles and apparel industry, with an annual revenue of 1.3 trillion USD in 2016, is one of the largest fast-growing industries. Sustainable use of resources forces the development of new plastic and textile recycling methods and implementation of the circular economy (reduce, reuse and recycle) concept. However, circular use of plastics and textiles could lead to the accumulation of a variety of contaminants in the recycled product. This paper first reviewed the origin and nature of potential hazards that arise from recycling processes of plastics and textiles. Next, we reviewed current analytical methods and safety assessment frameworks that could be adapted to detect and identify these contaminants. Various contaminants can end up in recycled plastic. Phthalates are formed during waste collection while flame retardants and heavy metals are introduced during the recycling process. Contaminants linked to textile recycling include; detergents, resistant coatings, flame retardants, plastics coatings, antibacterial and anti-mould agents, pesticides, dyes, volatile organic compounds and nanomaterials. However, information is limited and further research is required. Various techniques are available that have detected various compounds, However, standards have to be developed in order to identify these compounds. Furthermore, the techniques mentioned in this review cover a wide range of organic chemicals, but studies covering potential inorganic contamination in recycled materials are still missing. Finally, approaches like TTC and CoMSAS for risk assessment should be used for recycled plastic and textile materials.

Release of Selected Non-Intentionally Added Substances (NIAS) from PET Food Contact Materials: A New Online SPE-UHPLC-MS/MS Multiresidue Method

Food contact materials (FCMs) are an underestimated source of food chemical contaminants and a potentially relevant route of human exposure to chemicals that are harmful to the endocrine system. Foods and water are the main sources of exposure due to contact with the packaging materials, often of polymeric nature. European Regulation 10/2011 requires migration tests on FCMs and foodstuffs to evaluate the presence of listed substances (authorized monomers and additives) and non-intentionally added substances (NIAS) not listed in the regulation and not subjected to restrictions. The tests are required to ensure the compliance of packaging materials for the contained foods. NIAS are a heterogeneous group of substances classified with a potential estrogenic or androgenic activity. Subsequently, the evaluation of the presence of these molecules in foods and water is significant. Here we present an online SPE/UHPLC-tandem MS method to quantify trace levels of NIAS in food simulants (A: aqueous 3% acetic acid; B: aqueous 20% ethanol) contained in PET preformed bottles. The use of online SPE reduces systemic errors thanks to the automation of the technique. For the developed analytical method, we evaluate the limit of detection (LOD), the limit of quantitation (LOQ), selectivity, RSD% and BIAS% for LLOQ for a total of twelve NIAS, including monomers, antioxidants, UV-filters and additives. LOD ranged between 0.002 µg/L for bisphenol S and 13.6 µg/L for 2,6-di-tert-butyl-4-methylphenol (BHT). LOQs are comprised between 0.01 µg/L for bisphenol S and 42.2 µg/L for BHT. The online-SPE/UHPLC-tandem MS method is applied to the food simulants contained in several types of PET packaging materials to evaluate the migration of the selected NIAS. The results show the presence (µg/L) of NIAS in the tested samples, underlining the need for a new regulation for these potentially toxic molecules.

Food and beverage can coatings: A review on chemical analysis, migration, and risk assessment

The internal surface of food and beverage cans is generally covered with polymeric coatings to preserve food and protect metal substrate from corrosion. Coating materials are complex formulations that contain different starting substances (e.g., monomers, prepolymers, additives, etc.) and in addition during the manufacture of the material several compounds can be formed (e.g., reaction products, degradation products, etc.). These substances have the potential to migrate into the food. Many of them have not been identified and only some have been toxicologically evaluated. This article aims to provide a comprehensive review on the analytical methods used for the identification of potential migrants in can coatings. The migration and exposure to chemicals migrating from can coatings are also reviewed and discussed so far, which is essential for risk assessment. Moreover, a brief section on the current status of the legislation on varnishes and coatings for food contact in Europe is also presented. Liquid chromatography coupled to diode array and fluorescence detectors and particularly to mass spectrometry and gas chromatography-tandem mass spectrometry seem to be the techniques of choice for the identification of potential migrants in can coatings. Some studies have reported migration levels of BPA (bisphenol A) and BADGE (bisphenol A diglycidyl ether) and derivatives exceeding the specific migration limits set in the European legislation. On the whole, low dietary exposure to migrants from can coatings has been reported. However, it is interesting to highlight that in these studies the combined exposure to multiple chemicals has not been considered.