Improving foam performance using colloidal protein-polyphenol complexes: Lactoferrin and tannic acid

Acid-induced pea protein gels pretreated with media milling: Gelling properties and the formation mechanism

This study explored the effect of stirred media mill (SMM) processing on the acid-induced gelling properties of pea protein. Results showed that SMM treatment enhanced the gel strength from 75.06 g to 183.89 g and increased the water holding capacity from 46.64 % to 73.50 %. The minimum gelation concentration achieved for SMM-treated pea protein was 4 %, significantly lower than that of heat-pretreated pea protein (9 %). SMM decreased protein aggregate size from 104 μm to 180 nm. Microscopy analysis revealed that the small aggregates facilitated the formation of uniform gel networks with tight connections. Linear rheology indicated that small protein aggregates resulted in slower gelation rates with a higher G' for the formed gels. The SMM-pretreated protein gel showed strain hardening, shear thinning behaviors, and satisfactory stability to withstand large-amplitude oscillatory shear. Overall, SMM emerges as a promising technology for producing protein gel products with strong mechanical attributes and customizable rheological properties.

Complexation of bovine lactoferrin with selected phenolic acids via noncovalent interactions: Binding mechanism and altered functionality

Noncovalent interactions of 4 selected phenolic acids, including gallic acid (GA), caffeic acid (CA), chlorogenic acid (CGA), and rosmarinic acid (RA) with lactoferrin (LF) were investigated. Compound combined with LF in the binding constant of CA > GA > RA > CGA, driven by van der Waals and hydrogen bonding for GA, and hydrophobic forces for others. Conformation of LF was affected at secondary and ternary structure levels. Molecular docking indicated that GA and CA located in the same site near the iron of the C-lobe, whereas RA and CGA bound to the C2 and N-lobe, respectively. Significantly enhanced antioxidant activity of complexes was found compared with pure LF, as demonstrated by 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azinobis(2-ethylbenzothiazoline-6-sulfonate) (ABTS), and ferric reducing antioxidant power (FRAP) models. Caffeic acid, CGA, and RA significantly decreased the emulsifying stability index and improved foam ability of LF, and the effect of CA and RA was the most remarkable, respectively.

Enhancing the properties of soy protein isolate and dialdehyde starch films for food packaging applications through tannic acid crosslinking

The utilization of naturally derived biodegradable polymers, including proteins, polysaccharides, and polyphenols, holds significant promise in addressing environmental concerns and reducing reliance on nonrenewable resources. This study aimed to develop films with enhanced UV resistance and antibacterial capabilities by covalently cross-linking soy protein isolate (SPI) with dialdehyde starch (DAS) through the incorporation of tannic acid (TA). The covalent crosslinking of TA with DAS and SPI was shown to establish a stable chemical cross-linking network. The tensile strength of the resulting SPI/DAS/15TA film exhibited a remarkable increase of 208.27 % compared to SPI alone and 52.99 % compared to SPI/DAS film. Notably, the UV absorption range of SPI/DAS/10TA films extended from 200 nm to 389 nm. This augmentation can be attributed to the oxidation of TA's phenolic hydroxyl groups to quinone under alkaline conditions, which then facilitated cross-linking with the SPI chain via Michael addition and Schiff base reactions. Furthermore, the film demonstrated robust antibacterial properties due to the incorporation of TA. Collectively, the observed properties highlight the significant potential of the SPI/DAS/10TA film for applications in food packaging, where its enhanced mechanical strength, UV resistance, and antibacterial characteristics can contribute to improved product preservation and safety.

Structure of Human Serum Albumin at a Foam Surface

Proteins can be adsorbed on the air-water interface (AWI), and the structural changes in proteins at the AWI are closely related to the foaming properties of foods and beverages. However, how these structural changes in proteins at the AWI occur is not well understood. We developed a method for the structural assessment of proteins in the foam state using hydrogen/deuterium exchange mass spectrometry. Adsorption sites and structural changes in human serum albumin (HSA) were identified in situ at the peptide-level resolution. The N-terminus and the loop (E492-T506), which contains hydrophobic amino acids, were identified as adsorption sites. Both the structural flexibility and hydrophobicity were considered to be critical factors for the adsorption of HSA at the AWI. Structural changes in HSA were observed after more than one minute of foaming and were spread widely throughout the structure. These structural changes at the foam AWI were reversible.

Study of four polyphenol-Coregonus peled (C. peled) myofibrillar protein interactions on protein structure and gel properties

The effects of four polyphenols-chlorogenic acid (CA), gallic acid (GA), epicatechin gallate (ECG), and epigallocatechin gallate (EGCG) on the structure, gel properties, and interaction mechanisms of myofibrillar protein (MP) were studied. The changes in MP structure with polyphenols were analyzed using circular dichroism. The ultraviolet and fluorescence spectra and thermodynamic analysis indicated that the type of binding between the four polyphenols with the MP was static quenching of complex formation. GA had a more pronounced effect on improving MP gel properties. Finally, molecular docking determined that the affinity of the protein with the four polyphenols was in the order EGCG > ECG > CA > GA, with the main interaction force being hydrophobic interactions and hydrogen bonding, but hydrogen bonding dominates the interaction between GA and the protein. The findings illuminate the mechanism of MP binding to different polyphenols and facilitate the study of polyphenol-protein properties.

Interactions between humulinone derived from aged hops and protein Z enhance the foamability and foam stability

Foam is one of the important characteristics of beer, including foamability, foam stability and foam texture. Protein Z (PZ) is considered to be an important component of beer foam. In this study, the interaction between PZ and humulinone, a widespread compound in aged hops, and the effect on foam properties of PZ were investigated. The fluorescence spectra showed that the stoichiometric ratio of humulinone to PZ was 4.25 ± 0.48: 1, and the binding constant was (1.64 ± 0.17) × 105 M-1. MD and FTIR results showed that the main force of interaction between PZ and humulinone was hydrogen bond, and the possible sites were Asn-37, Ser-292, Lys-290 and Pro-395. Moreover, the addition of humulinone greatly reduced the surface tension of PZ solution, and changed the secondary structure of PZ, which is beneficial for the foam stability. Under the influence of humulinone, the foamability, foam stability and foam texture of PZ all increased.

Whey protein isolate-resveratrol complex as a radical scavenging foaming ingredient with increased ultraviolet stability

Functional foaming food ingredients play a vital role in preparing healthcare foods, however, the weak foamability and low photostability of ingredients severely limit their further development. Herein, whey protein isolate-resveratrol complexes (WPI-RES) were fabricated to address these challenges. Multi-spectral analysis and molecular simulation results revealed the key driving forces of hydrogen bonding and hydrophobic interactions to promote the formation of WPI-RES complexes, leading to the enhanced foamability and emulsifying properties of WPI after binding with RES. Importantly, the robust radical scavenging activity of RES within WPI was maintained under UV light irradiation compared to that of free RES as identified by DPPH assay, which was presumably due to inhibited photoisomerization of RES after binding to WPI. This work provides a promising foaming ingredient with increased ultraviolet stability and radical scavenging activity, paves the way to develop stable health-promoting foaming food products.

Investigation of peanut allergen-procyanidin non-covalent interactions: Impact on protein structure and in vitro allergenicity

Interactions between plant polyphenols and food allergens may be a new way to alleviate food allergies. The non-covalent interactions between the major allergen from peanut (Ara h 2) with procyanidin dimer (PA2) were therefore characterized using spectroscopic, thermodynamic, and molecular simulation analyses. The main interaction between the Ara h 2 and PA2 was hydrogen bonding. PA2 statically quenched the intrinsic fluorescence intensity and altered the conformation of the Ara h 2, leading to a more disordered polypeptide structure with a lower surface hydrophobicity. In addition, the in vitro allergenicity of the Ara h 2-PA2 complex was investigated using enzyme-linked immunosorbent assay (ELISA) kits. The immunoglobulin E (IgE) binding capacity of Ara h 2, as well as the release of allergenic cytokines, decreased after interacting with PA2. When the ratio of Ara h 2-to-PA2 was 1:50, the IgE binding capacity was reduced by around 43 %. This study provides valuable insights into the non-covalent interactions between Ara h 2 and PA2, as well as the potential mechanism of action of the anti-allergic reaction caused by binding of the polyphenols to the allergens.

Noncovalent Interaction of Lactoferrin with Epicatechin and Epigallocatechin: Focus on Fluorescence Quenching and Antioxidant Properties

Lactoferrin (LF) from bovine milk possesses antioxidant activity, immune regulatory and other biological activities. However, the effects of epicatechin (EC) and epigallocatechin (EGC) interacting with LF on the antioxidant activity of LF have not been investigated. Therefore, this study aimed to explore their interaction mechanism and the antioxidant activity of LF. UV spectra revealed that EGC (100 μM) induced a higher blue shift of LF at the maximum absorption wavelength than that of EC (100 μM). Fluorescence spectra results suggested that LF fluorescence was quenched by EC and EGC in the static type, which changed the polarity of the microenvironment around LF. The quenching constants Ksv (5.91 × 103-9.20 × 103) of EC-LF complexes at different temperatures were all higher than that (1.35 × 103-1.75 × 103) of the EGC-LF complex. EC could bind to LF via hydrophobic interactions while hydrogen bonding and van der Waals forces drove the binding of EGC to LF. Both the EC-LF complex and EGC-LF complex could bind to LF with one site. EGC formed more hydrogen bonds with LF than that of EC. The antioxidant activity of LF was increased by the high addition level of EC and EGC. These findings would provide more references for developing LF-catechin complexes as functional antioxidants.

Development of protein-polyphenol particles to stabilize high internal phase Pickering emulsions by polyphenols' structure

Protein-polyphenol colloidal particles are promising stabilizers for high internal phase Pickering emulsions (HIPPEs). However, the relationship between the structure of the polyphenols and its ability to stabilize HIPPEs has not been studied thus far. In this study, bovine serum albumin (BSA)-polyphenols (B-P) complexes were prepared, and their ability to stabilize HIPPEs was investigated. The polyphenols were bound to BSA via non-covalent interactions. Optically isomeric polyphenols formed similar bonds with BSA, whereas a greater number of trihydroxybenzoyl groups or hydroxyl groups in the dihydroxyphenyl moieties of polyphenols increased the B-P interactions. Polyphenols also reduced the interfacial tension and enhanced the wettability at the oil-water interface. The HIPPE stabilized by BSA-tannic acid complex exhibited the highest stability among the B-P complexes and resisted demixing and aggregation during centrifugation. This study promotes the potential applications of polyphenol-protein colloidal particles-stabilized HIPPEs in the food industry.

Development of high internal phase emulsions with noncovalent crosslink of soy protein isolate and tannic acid: Mechanism and application for 3D printing

In this study, we propose a design strategy using soy protein isolate (SPI)-tannic acid (TA) complexes crosslinked through noncovalent interactions to develop high internal phase emulsions (HIPEs) for 3D printing materials. The results of Fourier transform infrared spectroscopy, intrinsic fluorescence, and molecular docking analyses indicated that the dominant interactions occurring between the SPI and TA were mediated by hydrogen bonds and hydrophobic interactions. The secondary structure, particle size, ζ-potential, hydrophobicity and wettability of SPI was significantly altered by the addition of TA. The microstructure of HIPEs stabilized by SPI-TA complexes exhibited more regular and even polygonal shapes, thereby allowing the protein to form a dense self-supporting network structure. When the concentration of TA exceeded 50 μmol/g protein, the formed HIPEs remained stable after 45 days of storage. Rheological tests revealed that the HIPEs exhibited a typical gel-like (G' > G'') and shear-thinning behavior, which contributed to preferable 3D printing behavior.

Understanding the pH-dependent interaction of anthocyanin with two food-derived transferrins

The potential binding of cyanidin-3-O-glucoside (C3G) to bovine lactoferrin (BLF) and ovotransferrin (OTF) at pH 3, 5, and 7 was investigated for the first time. Multiple spectroscopic techniques demonstrated pH-dependent alterations in the conformational characteristics of BLF and OTF upon complexation with C3G. Fluorescence quenching assays showed that their highest binding affinity was at pH 7. Hydrophobic interactions and hydrogen bonds were found to be crucial in molecular dynamics simulations but with significantly lower probabilities of formation at pH 3 (p < 0.05). At pH 7, electrostatic attraction can occur for the negatively charged forms of C3G, and the well-maintained native structures of BLF and OTF may be favorable for stabilizing the C3G binding sites. This study sheds light on the stronger interaction of C3G with BLF/OTF at pH 7, which may have implications for future applications such as anthocyanin stabilization or the development of functional food ingredients.

Effect of ultrasound treatment on interactions of whey protein isolate with rutin

Rutin is a biologically active polyphenol, but its poor water solubility and low bioavailability limit its application to the food industry. We investigated the effect of ultrasound treatment on the properties of rutin (R) and whey protein isolate (WPI) using spectral and physicochemical analysis. The results revealed that there was covalent interaction between whey protein isolate with rutin, and the binding degree of whey isolate protein with rutin increased with ultrasound treatment. Additionally, solubility and surface hydrophobicity of WPI-R complex improved with ultrasonic treatment, and a maximum solubility of 81.9 % at 300 W ultrasonic power. The ultrasound treatment caused the complex to develop a more ordered secondary structure, resulting in a three-dimensional network structure with small and uniform pore sizes. This research could provide a theoretical reference for studying protein-polyphenol interactions and their applications in food delivery systems.

Influence of hemin on structure and emulsifying properties of soybean protein isolate

Hemin has potential application value in plant-based meat analogues. However, mechanisms of interaction between hemin and plant protein are unclear. In this study, soy protein isolate (SPI) was applied to examine these interactions using multi-spectroscopic and molecular docking techniques. Additionally, the influence of hemin on emulsification of SPI was also explored. Fluorescence and UV-Vis spectra showed quenching of SPI by hemin was static, resulting in conformation changes on the surface amino acid residues, around which hydrophobicity was significantly reduced from 425.9 ± 16.2 to 108.9 ± 1.8 (p < 0.05). FTIR and CD spectra results suggested the protein secondary structure altered, and the content of α-helix and random coils increased by 1.13% and 1.43%, respectively. Furthermore, emulsifying properties of SPI were strengthened with increased hemin. This work improves our understanding of interactions between SPI and hemin and offer a theoretical basis for application of heme in plant-based meat analogues.

Novel Colloidal Food Ingredients: Protein Complexes and Conjugates

Food proteins, polysaccharides, and polyphenols are natural ingredients with different functional attributes. For instance, many proteins are good emulsifiers and gelling agents, many polysaccharides are good thickening and stabilizing agents, and many polyphenols are good antioxidants and antimicrobials. These three kinds of ingredients can be combined into protein, polysaccharide, and/or polyphenol conjugates or complexes using covalent or noncovalent interactions to create novel multifunctional colloidal ingredients with new or improved properties. In this review, the formation, functionality, and potential applications of protein conjugates and complexes are discussed. In particular, the utilization of these colloidal ingredients to stabilize emulsions, control lipid digestion, encapsulate bioactive ingredients, modify textures, and form films is highlighted. Finally, future research needs in this area are briefly proposed. The rational design of protein complexes and conjugates may lead to the development of new functional ingredients that can be used to create more nutritious, sustainable, and healthy foods.

Insights into the interaction mechanism of acid phosphatase from Lateolabrax japonicus livers and rosmarinic acid using multispectroscopy and molecular docking

Acid phosphatase (ACP) is a key enzyme that hydrolyzes inosinic acid. The mechanisms underlying the interaction between rosmarinic acid (RA) and ACP and the inhibition of the enzyme were investigated using inhibition kinetics, UV-visible and fluorescence spectroscopy, circular dichroism, and molecular docking. The results showed that RA was a reversible inhibitor of ACP and that the inhibition mechanism was uncompetitive. The ACP fluorescence was quenched by RA, and the quenching mode was static. The interaction of ACP with RA was driven by H bonds and van der Waals forces. The addition of RA increased the α-helix content and decreased the β-sheet, β-turn, and random coil contents in ACP, thereby altering the secondary structure of the enzyme. This study enriched our understanding of inhibitory and interaction mechanisms involving ACP and RA.

Noncovalent interaction mechanism and functional properties of flavonoid glycoside-β-lactoglobulin complexes

The interaction of flavonoid glycosides with milk protein and effects on the functional properties of flavonoid glycoside-β-lactoglobulin complexes are still inexplicit. The noncovalent interactions between flavonoid glycosides including quercetin (QE), quercitrin (QI), and rutin (RU) with β-lactoglobulin (β-LG) were determined by computer molecular docking and multispectral technique analysis. The fluorescence quenching results indicated that the flavonoid glycosides formed stable complexes with β-LG by the static quenching mechanism. The computer molecular docking and thermodynamic parameters analysis conclude that the main interaction of β-LG-QE was via hydrogen bonding, while for β-LG-QI and β-LG-RU it is via hydrophobic forces. The order of binding affinity to β-LG was QE (37.76 × 10⁴ L mol^-1) > RU (16.80 × 10⁴ L mol^-1) > QI (11.17 × 10⁴ L mol^-1), which indicated that glycosylation adversely affected the colloidal complex binding capacity. In this study, the physicochemical properties of the protein-flavonoid colloidal complex were determined. The analysis by circular dichroism spectroscopy demonstrated that flavonoid glycosides made the protein structure looser by inducing the secondary structure of β-LG to transform from the α-helix and β-sheet to random coils. The hydrophobicity of β-LG decreased due to binding with flavonoid glycosides, while functional properties including foaming, emulsification, and antioxidant capacities of β-LG were improved due to the noncovalent interactions. This study presents a part of the insight and guidance on the interactive mechanism of flavonoid glycosides and proteins and is helpful for developing functional protein-based foods.

Complex plant protein prepared from rice protein and pea protein: Improve the thermal stability of betanin

Betanin (BN) is a kind of edible natural red pigment with a variety of biological activities, but the thermal instability of BN has critically restricted its application in food industry. In this study, complex plant protein (RP-PP) was constructed by rice protein (RP) and pea protein (PP) to study the thermal protection effect and protective mechanism on BN. Thermal degradation results indicated RP-PP significantly improved thermal protection effect, and the degradation rate of BN was decreased from 93.74 % to 56.48 % after heating at 80 ℃ for 60 min. The main interaction between RP-PP and BN was hydrophobic force based on the result of fluorescence spectroscopy, FTIR and molecular docking. In addition, a porous network structure of RP-PP was observed by SEM, and the pore structure gradually decreased at the presence of BN, which speculated BN was trapped in it. TEM observation showed that RP-PP gradually aggregated with the increasing BN concentration, leading to a significant increase in particle size and the formation of network structure. The BN acted as a bridge to the surrounding proteins in the aggregated complex and was encapsulated within it. The interaction and encapsulation may be the key reasons for the improved thermal stability of BN.

Structure characteristics and physicochemical property of starch, dietary fiber, protein in purple corn flour modified by low temperature impact mill

The structural changes of macromolecules (starch, dietary fiber and protein) in purple corn flour (PCF) modified by a low temperature impact mill (LTIM) at different air classifier speed (ACS) were investigated. LTIM changed the multi-scale structure of starch, which was characterized by increased starch damage, stronger destruction of relative crystallinity (from 37.85 % to 15.53 %) and short-range ordered structure (R_1047/1022, from 1.21 to 0.73) with the increased ACS. The structure of dietary fiber was also destroyed on multi-level, including decreased particle size, destructive morphology, and slightly changed crystalline structure. Additionally, LTIM showed high damage on the senior structure (surface hydrophobicity, disulfide bond, secondary structure) of protein. Due to the structure changes modified by LTIM, starch, dietary fiber and protein played different role on hydration property of PCF. Starch had positive effect, while dietary fiber and protein had negative effect. Our experimental results may provide valuable information for further analysis of other quality changes (oil holding capacity, cation exchange capacity, ability to produce high-quality dough or end-out products, etc.) of purple corn flour after LTIM treatment.

Hydrogen bond-driven assembly of coral-like soy protein isolate-tannic acid microcomplex for encapsulation of limonene

BACKGROUND

The encapsulation of flavor and aroma compounds has great potential in foods, while effective preparation in the food industry is still a great challenge. Inspired by leather tanning, tannic acid (TA) was used for deep crosslinking through hydrogen bond-driven assembly on soy protein isolate for encapsulating limonene with a high loading ratio.

RESULTS

The added TA changed the protein structure and formed a limonene-loaded microcomplex. The morphology of these microcomplexes changed from smooth to rough, followed by the formation of smooth nanoparticle aggregates, by changing the amount of TA. The encapsulation efficiency and loading ratio were increased from 0.78% and 4.30% to 59.32% and 45.78% after increasing TA from 1.875 to 60 mg mL^-1 . The result of confocal laser scanning microscopy indicated that limonene is evenly distributed in microcomplexes. Additionally, the results of thermal stability demonstrated protection of limonene by soy protein-tannic acid microcomplex.

CONCLUSION

It is suggested that the added TA improved the encapsulation efficiency and loading ratio. Limonene is loaded in the complex in two ways. The present research provides a new and easy path for the preparation of the non-thermal soy protein aroma carrier. © 2022 Society of Chemical Industry.

Boosting the Bioaccessibility of Dietary Bioactives by Delivery as Protein-Polyphenol Aggregate Particles

Protein-polyphenol aggregate particles concurrently fortify a functional food product with healthy dietary proteins and concentrated polyphenols. However, what impact does ingestion of aggregate particles have on ultimate health relevance of either the polyphenolic molecules in the matrix or the protein molecules? Because human health benefits are contingent on bioavailability after ingestion, the fate of these molecules during transit in the gastrointestinal tract (GIT) will dictate their utility as functional food ingredients. This brief review explores diverse applications of protein-polyphenol particles in the food industry and the bioaccessibility of both bioactive polyphenolic compounds and edible proteins. Evidence to date suggests that complexation of phytoactive polyphenolics effectively enhances their health-relevant impacts, specifically because the phytoactives are protected in the protein matrix during transit in the GIT, allowing intact, non-degraded molecules to reach the colon for catabolism at the gut microbiome level, a prerequisite to realize the health benefits of these active compounds.

A review of protein-phenolic acid interaction: reaction mechanisms and applications

Phenolic acids (PA) are types of phytochemicals with health benefits. The interaction between proteins and PAs can cause minor or extensive changes in the structure of proteins and subsequently affect various protein properties. This study investigates the protein/PA (PPA) interaction and its effects on the structural, physicochemical, and functional properties of the system. This work particularly focused on the ability of PAs as a subgroup of phenolic compounds (PC) on the modification of proteins. Different aspects including the influence of structure affinity relationship and molecular weight of PA on the protein interaction have been discussed in this review. The physicochemical properties of PPA change mainly due to the change of hydrophilic/hydrophobic parts and/or the formation of some covalent and non-covalent interactions. Furthermore, PPA interactions affecting functional properties were discussed in separate sections. Due to insufficient studies on the interaction of PPAs, understanding the mechanism and also the type of binding between protein and PA can help to develop a new generation of PPA. These systems seem to have good capabilities in the formulation of low-fat foods like high internal Phase Emulsions, drug delivery systems, hydrogel structures, multifunctional fibers or packaging films, and 3 D printing in the meat processing industry.

Ultrasound-assisted preparation of lactoferrin-EGCG conjugates and their application in forming and stabilizing algae oil emulsions

The aim of this study was to prepare lactoferrin-epigallocatechin-3-gallate (LF-EGCG) conjugates and to determine their ability to protect emulsified algal oil against aggregation and oxidation. LF-EGCG conjugates were formed using an ultrasound-assisted alkaline treatment. The ultrasonic treatment significantly improved the grafting efficiency of LF and EGCG and shortened the reaction time from 24 h to 40 min. Fourier transform infrared spectroscopy and circular dichroism spectroscopy analyses showed that the covalent/non-covalent complexes could be formed between LF and EGCG, with the CO and CN groups playing an important role. The formation of the conjugates reduced the α-helix content and increased the random coil content of the LF. Moreover, the antioxidant activity of LF was significantly enhanced after conjugation with EGCG. LF-EGCG conjugates as emulsifiers were better at inhibiting oil droplet aggregation and oxidation than LF alone. This study demonstrates that ultrasound-assisted formation of protein-polyphenol conjugates can enhance the functional properties of the proteins, thereby extending their application as functional ingredients in nutritionally fortified foods.