High-pressure homogenization: A potential technique for transforming insoluble pea protein isolates into soluble aggregates

Investigating the thermal stability and calcium resistance of O/W emulsions prepared with glycosylated whey protein hydrolysates modified by different saccharides

The poor thermal stability and ion tolerance of whey protein hydrolysates (WPH) restrict its application in emulsions, while glycosylation shows potential benefits in improving WPH stability. However, the relationship between saccharides with different Mw and the glycosylation behavior of WPH rich in short peptides is unclear. In response, the effect of different saccharides on glycosylated WPH rich in short peptides and its emulsion stability were investigated. Grafted small Mw saccharides were more beneficial to the emulsion stability of WPH. Specifically, grafting xylose effectively inhibited 121 °C sterilization and 5 mM CaCl2-induced coalescence of WPH emulsion (687.50 nm) by comprehensively enhancing steric hindrance, conformational flexibility and electrostatic repulsion, and dissociating large aggregates into small aggregates. Conversely, grafting maltodextrin (30,590 Da) reduced thermal stability of WPH emulsion (4791.80 nm) by steric shielding and bridging flocculation. These findings provide new sights into glycosylation mechanism for WPH and achieving its application in nutritional emulsions.

Enhancing the usability of pea protein in emulsion applications through modification by various approaches: A comparative study

The extensive utilization in food industry of pea protein is often impeded by its low water solubility, resulting in poor functional properties. Various methods, including pH-shifting (PS), ultrasonication (US), high-pressure micro-fluidization (MF), pH-shifting combined with ultrasonication (PS-US), and pH-shifting with micro-fluidization (PS-MF), were utilized to modify pea protein isolate (PPI) in order to enhance its functionality in emulsion formulation. The physicochemical properties and structural changes of the protein were investigated by assessing solubility, particle size, surface charge, protein profile, surface hydrophobicity, free sulfhydryl groups, and secondary structure content. The extent of modification induced by each treatment method on PPI-stabilized emulsions was compared based on parameters such as adsorbed interfacial protein concentration, particle size, zeta potential, and microstructure of the prepared emulsions. All modification increased the solubility of pea protein in the sequence of PS (4-fold) < MF (7-fold) < US (11-fold) < PS-US (13-fold) < PS-MF (14-fold). For single treatments, proteins dissolved more readily under US, resulting in the most uniform emulsions with small particle. The combined processes of PS-US and PS-MF further improved solubility, decreased emulsions particle size, promoted uniformity of emulsions. PS-US-stabilized emulsions displayed more smaller droplet size, narrower size distribution, and slightly higher stability than those prepared by PS-MF. The relatively higher emulsifying capacity of PPI treated by PS-US than those by PS-MF may be attributed to its higher surface hydrophobicity.

Impact of pilot-scale microfluidization on soybean protein structure in powder and solution

The effect of microfluidization treatment on the primary, secondary, and tertiary structure of soybean protein isolate (SPI) was investigated. The samples were treated with and without controlling the temperature and circulated in the system 1, 3, and 5 times at high pressure (137 MPa). Then, the treated samples were freeze-dried and reconstituted in water to check the impact of the microfluidization on two different states: powder and solution. Regarding the primary structure, the SDS-PAGE analysis under reducing conditions showed that the protein bands remained unchanged when exposed to microfluidization treatment. When the temperature was controlled for the samples in their powder state, a significant decrease in the quantities of β-sheet and random coil and a slight reduction in α-helix content was noticed. The observed decrease in β-sheet and the increase in β-turns in treated samples indicated that microfluidization may lead to protein unfolding, opening the hydrophobic regions. Additionally, a lower amount of α-helix suggests a higher protein flexibility. After reconstitution in water, a significant difference was observed only in α-helix, β-sheet and β-turn. Related to the tertiary structure, microfluidization increases the surface hydrophobicity. Among all the conditions tested, the samples where the temperature is controlled seem the most suitable.

Application of legumes in plant-based milk alternatives: a review of limitations and solutions

In recent years, a global shift has been observed toward reducing the consumption of animal-derived foods in favor of healthier and more sustainable dietary choices. This has led to a steady growth in the market for plant-based milk alternatives (PBMAs). Projections suggest that this market will reach a value of USD 69.8 billion by 2030. Legumes, being traditional and nutritious ingredients for PMBAs, are rich in proteins, dietary fibers, and other nutrients, with potential health benefits such as anticancer and cardiovascular disease prevention. In this review, the application of 12 legumes in plant-based milk alternatives was thoroughly discussed for the first time. However, compared to milk, processing of legume-based beverages can lead to deficiencies such as nutritional imbalance, off-flavor, and emulsion stratification. Considering the potential and challenges associated with legume-based beverages, this review aims to provide a scientific comparison between legume-based beverages and cow's milk in terms of nutritional quality, organoleptic attributes and stability, and to summarize ways to improve the deficiencies of legume-based beverages in terms of raw materials and processing method improvements. In conclusion, the legume-based beverage industry will be better enhanced and developed by improving the issues.

Unraveling the effect of combined heat and high-pressure homogenization treatment on the improvement of chickpea protein solubility from the perspectives of colloidal state change and structural characteristic modification

Chickpea protein (CP) is a promising plant protein ingredient, but the poor solubility has limited its broad application. In this study, heating followed by high-pressure homogenization (HPH) was used to improve the solubility of CP. The results showed that combined heat (80℃, 30 min) and HPH (80 MPa, 2 cycles) treatment exhibited an additive effect in improving the solubility of CP. This improvement could be attributed to the dissociation and the rearrangement of large insoluble protein aggregates into small-sized soluble protein aggregates, the increased exposure of hydrophobic residues and reactive sulfhydryl groups, the transformation of α-helices to β-sheets and β-turns. Moreover, the 11S subunits of CP could form reinforced disulfide covalent cross-links under heating + HPH, which may provide steric hindrance preventing the reassembly of large protein bodies. This work proposes an interesting approach to enhance the physicochemical properties of CP for tailoring techno-functional plant protein ingredients in food formulations.

Unraveling the potential of non-thermal ultrasonic contact drying for enhanced functional and structural attributes of pea protein isolates: A comparative study with spray and freeze-drying methods

The challenge of preserving the quality of thermal-sensitive polymeric materials specifically proteins during a thermal drying process has been a subject of ongoing concern. To address this issue, we investigated the use of ultrasound contact drying (USD) under non-thermal conditions to produce functionalized pea protein powders. The study extensively examined functional and physicochemical properties of pea protein isolate (PPI) in powder forms obtained through three drying methods: USD (30 °C), spray drying (SD), and freeze drying (FD). Additionally, physical attributes such as powder flowability and color, along with morphological properties, were thoroughly studied. The results indicated that the innovative USD method produced powders of comparable quality to FD and significantly outperformed SD. Notably, the USD-PPI exhibited higher solubility across all pH levels compared to both FD-PPI and SD-PPI. Moreover, the USD-PPI samples demonstrated improved emulsifying and foaming properties, a higher percentage of random coil form (56.2 %), increased gel strength, and the highest bulk and tapped densities. Furthermore, the USD-PPI displayed a unique surface morphology with visible porosity and lumpiness. Overall, this study confirms the effectiveness of non-thermal ultrasound contact drying technology in producing superior functionalized plant protein powders, showing its potential in the fields of chemistry and sustainable materials processing.

Alcalase-hydrolyzed insoluble soybean meal hydrolysate aggregates: Structure, bioactivity, function properties, and influences on the stability of oil-in-water emulsions

We studied the influences of hydrolysis time on the structure, functional properties, and emulsion stability of insoluble soybean meal hydrolysate aggregates (ISMHAs). We assume that the ISMHAs produced by soybean meal can be used as emulsifiers to prepare stable emulsions. The molecular weights of these ISMHAs were below 53 kDa. After hydrolysis, a decrease in α-helices and an increase in random coils indicated that the soybean meal proteins were unfolding. Moreover, the fluorescence intensity, UV absorption, and surface hydrophobicity of ISMHAs increased. These results would contribute to their antioxidant activity and functional properties. Additionally, the 90-min ISMHA sample exhibited the highest ABTS+• scavenging activity (80.02 ± 4.55 %), foaming stability (52.92 ± 8.06 %), and emulsifying properties (emulsifying activity index of 97.09 m2/g; emulsifying stability index of 371.47 min). The 90-min ISMHA emulsion exhibited the smallest particle size and excellent storage stability. Soybean meal peptide by-product emulsifier has potential for sustainable application.

Effect of High-Pressure Homogenization on the Properties and Structure of Cold-Induced Chiba Tofu Gel in Soy Protein Isolate

In the actual production process of soy protein isolate (SPI), most of the homogeneous operating pressure is controlled below 20 MPa due to the consideration of production safety and the limitation of the pressure control capability of homogeneous equipment. In order to improve the functional properties of SPI and adapt it to actual production, the effects of different homogeneous pressures (4, 8, 10, 12, and 14 MPa) on the structure and gel properties of SPI were studied from the perspective of production control. Compared to the control group, the modified SPI improved the hardness, springiness, cohesiveness, chewiness, and water holding capacity (WHC) of the protein gel (p < 0.05). Rheological analysis shows that both G' and G″ increase with increasing frequency, reaching a maximum at 12 MPa. The gel intermolecular force results show that the disulfide bond, hydrophobic interaction, and non-disulfide bond are important molecular forces for gel formation. The particle size distribution uniformity of modified SPI was high, and scanning electron microscopy (SEM) analysis showed that the protein gel with a continuous uniform and dense network structure could be formed by high-pressure homogeneous modification. Overall, high-pressure homogenization technology has the potential to improve SPI gel structure and WHC, and 12 MPa modified SPI gel has the most significant effect.

Enhancing pea protein isolate functionality: A comparative study of high-pressure homogenization, ultrasonic treatment, and combined processing techniques

Pea protein has attracted widespread attention due to its high nutritional value, low allergenicity, non-GMO status, and broad availability. However, compared to animal proteins, pea protein has inferior functional properties, which limits its application in the food industry. This study used pea protein isolate (PPI) as the main raw material and investigated the effects of high-pressure homogenization (HPH), ultrasonic treatment (US), and the combination of the two in different orders on the structure and function of PPI. The results showed that HPH or US promoted the transformation of PPI insoluble suspension into a uniform protein dispersion, significantly reducing particle size, unfolding the spatial structure, exposing more amino acid residues. These structural changes resulted in a substantial increase in the solubility, foaming capacity and emulsifying activity of PPI. Moreover, the combined treatments further impacted the properties of PPI, largely depending on the order of the processing steps; the combination of HPH-US exhibited the best functional characteristics.

Effect of Physical Modifications on Physicochemical and Functional Properties of Walnut Protein

Walnut protein is a high-quality vegetable protein with promising applications in the food industry; however, its potential is hindered by low solubility and associated properties. We utilized various physical modification techniques (cold plasma; ball milling; superfine grinding; ultrasound; wet ball milling; and high-pressure microjet) to enhance walnut proteins' physicochemical and functional properties. The changes in particle size, microstructure, surface hydrophobicity, fluorescence, solubility, foaming, and emulsification were investigated. Cold plasma and ultrasound treatments minimally affected particle size and morphology. Cold plasma increased the particle size D4,3 from 145.20 μm to 152.50 μm. Ultrasonication reduced the particle size D4,3 to 138.00 μm. The variation was within ±10 μm, while the particle size of walnut protein significantly decreased after the other four modification treatments. The greatest variation in particle size was in the superfine grinding, with the D4,3 being reduced to 23.80 μm. Ultrasound treatment converted the β-sheet into an α-helix, while the other methods transformed the α-helix into a β-sheet. The dispersion stability notably improved after wet ball milling and high-pressure microjet treatments, which was accompanied by a significant increase in solubility from 6.9% (control) to 13.6% (wet ball milling) and 31.7% (high-pressure microjet). The foaming and emulsification properties were also enhanced through these modifications (foaming improved from 47% to 55.33% and emulsification improved from 4.32 m2/g to 8.27 m2/g). High-pressure microjet treatment proved most effective at improving solubility in the functional properties of walnut protein. These findings are expected to help broaden the potential utilization of walnut protein in the food industry, including in beverages and emulsions.

Functionalization of pine kernel protein by pH-shifting combined with ultrasound treatments: Further improvement with increasing acidity

As a novel plant protein, developing various aspects of pine kernel protein (PKP) functionality is essential to meet the demand for protein-rich foods. To achieve this, the PKP was functionalized by a combination of pH-shifting and ultrasound techniques. The solubility, emulsification and droplet stability of the PKP in the pH range suitable to food (pH 3 to 7) were further investigated. The pH 12-shifting was an effective strategy to increase the solubility of PKP under extreme acidic and neutral conditions, characterized by a higher content of β-sheets and random coils, a greater exposure of free sulfhydryl and hydrophobic groups. Furthermore, appropriate ultrasonic power (250 W) further improved the solubility of PKPs by disrupting intermolecular hydrogen and hydrophobic bonds. As the ambient acidity increased, the emulsions exhibited higher viscoelasticity and stronger protein interactions. Especially at pH 3, the oil droplets stabilized by U250-PKP-12 (PKP treated with 250 W ultrasound-assisted pH 12-shifting) were homogeneously dispersed and surrounded by dense protein, maintaining small particle size and large electrostatic repulsion, and there was no apparent creaming or phase separation in the emulsions after 10 days of storage. Thus, the functionality of PKP after pH-shifting combined with ultrasonic treatments is further enhanced by increasing the environmental acidity.

Applications of Enzyme Technology to Enhance Transition to Plant Proteins: A Review

As the plant-based food market grows, demand for plant protein is also increasing. Proteins are a major component in foods and are key to developing desired structures and textures. Seed storage proteins are the main plant proteins in the human diet. They are abundant in, for example, legumes or defatted oilseeds, which makes them an excellent candidate to use in the development of novel plant-based foods. However, they often have low and inflexible functionalities, as in nature they are designed to remain densely packed and inert within cell walls until they are needed during germination. Enzymes are often used by the food industry, for example, in the production of cheese or beer, to modify ingredient properties. Although they currently have limited applications in plant proteins, interest in the area is exponentially increasing. The present review first considers the current state and potential of enzyme utilization related to plant proteins, including uses in protein extraction and post-extraction modifications. Then, relevant opportunities and challenges are critically discussed. The main challenges relate to the knowledge gap, the high cost of enzymes, and the complexity of plant proteins as substrates. The overall aim of this review is to increase awareness, highlight challenges, and explore ways to address them.

Physical treatment synergized with natural surfactant for improving gas-water interfacial behavior and foam characteristics of α-lactalbumin

The purpose of this study was to investigate effect of physical treatment (ultrasound, U/high pressure homogenization, H/combined treatment, UH or HU) and surfactant (Mogroside V, Mog) on air/water interface adsorption and foaming properties of α-lactalbumin (ALa). Firstly, the binding of Mog and all physical-treated ALa was a static quenching process. Mog had the greatest binding affinity for HU-ALa among all treated samples. U or H treatment could change surface hydrophobicity of ALa/Mog complex. Secondly, at the molar ratio (ALa:Mog) of 1:50, foaming ability (FA) of all ALa samples got the maximum. The sequence of FA in ALa and ALa/Mog complex was listed as follow: HU > U > H > UH. Moreover, foaming stability (FS) of HU-ALa was the highest, followed by H-ALa, U-ALa and UH-ALa. Meanwhile, low concentration Mog increased FS of ALa or UH-ALa, but it reduced FS of H-ALa, U-ALa and HU-ALa. Quartz crystal microbalance with dissipation monitoring (QCM-D) experiment indicated that ALa/Mog complex after U or H treatment was quickly absorbed at air/water interface, compared with the treated ALa, and HU-ALa/Mog had the largest frequency shift. In addition, HU-ALa had the thickest bubble membrane and the highest dissipation shift in all samples, indicating that the absorbed membrane thickness and viscoelasticity of samples was correlated with foam stability. Therefore, U and H treatment synergism with Mog was an effective approach to enhance foam properties of ALa, which indicated that HU-treated ALa/Mog complex could be viewed as the safe and efficient foaming agent applied in food processing.

Investigation of Structural Characteristics and Solubility Mechanism of Edible Bird Nest: A Mucin Glycoprotein

In this study, the possible solubility properties and water-holding capacity mechanism of edible bird nest (EBN) were investigated through a structural analysis of soluble and insoluble fractions. The protein solubility and the water-holding swelling multiple increased from 2.55% to 31.52% and 3.83 to 14.00, respectively, with the heat temperature increase from 40 °C to 100 °C. It was observed that the solubility of high-Mw protein increased through heat treatment; meanwhile, part of the low-Mw fragments was estimated to aggregate to high-Mw protein with the hydrophobic interactions and disulfide bonds. The increased crystallinity of the insoluble fraction from 39.50% to 47.81% also contributed to the higher solubility and stronger water-holding capacity. Furthermore, the hydrophobic interactions, hydrogen bonds, and disulfide bonds in EBN were analyzed and the results showed that hydrogen bonds with burial polar group made a favorable contribution to the protein solubility. Therefore, the crystallization area degradation under high temperature with hydrogen bonds and disulfide bonds may be the main reasons underlying the solubility properties and water-holding capacity of EBN.