Degradation mechanism and pathway of tetracycline in milk by heterojunction N-TiO2-Bi2WO6 film under visible light

Highly efficient recovery of Zn (II) from zinc-containing wastewater by tourmaline tailings geopolymers to in-situ construct nanoscale ZnS for the photodegradation of tetracycline hydrochloride

While treating zinc-containing wastewater, recovering zinc for reuse as a secondary resource has significant environmental and economic benefits. Herein, based on the alkali-activated tourmaline tailings geopolymers (TTG) after adsorption of zinc ions (Zn (II)), a series of new composites with in-situ construction ZnS nanoparticles on TTG (ZnS/TTG) were synthesized, and used as photocatalysts for the photodegradation of tetracycline hydrochloride (TCH) in solution. Specifically, ZnS nanoparticles were uniformly and stably distributed in the layered structure of TTG, interweaving with each other to generate an interfacial electric field, which could induce more photocarrier generation. Meanwhile, TTG acted as an electron acceptor to accelerate the electron transfer at the interface, thus enhancing the photodegradation activity for TCH. The active radical quenching experiments combined with the ESR indicated that the active species produced during the photocatalytic degradation of TCH by ZnS/TTG composites were •O2- and photogenerated h+. When the initial concentration of Zn (II) was 60 mg/L, the synthesized 60-ZnS/TTG composites (0.5 g/L) reached 91.53% degradation efficiency of TCH (10 mg/L) at pH = 6. Furthermore, the possible pathways and mechanism of 60-ZnS/TTG composites photodegraded TCH were revealed with the aid of degraded intermediates. This report not only proposed valuable references for reusing heavy metal ions and removing TCH from wastewater, but also provided promising ideas for realizing the conversion of used adsorbents into high-efficiency photocatalysts.

Facile Synthesis to Porous TiO2 Nanostructures at Low Temperature for Efficient Visible-Light Degradation of Tetracycline

In this study, nanoporous TiO2 with hierarchical micro/nanostructures was synthesized on a large scale by a facile one-step solvothermal method at a low temperature. A series of characterizations was performed and carried out on the as-prepared photocatalysts, which were applied to the degradation of the antibiotic tetracycline (TC). The results demonstrated that nanoporous TiO2 obtained at a solvothermal temperature of 100 °C had a spherical morphology with high crystallinity and a relatively large specific surface area, composed of a large number of nanospheres. The nanoporous TiO2 with hierarchical micro/nanostructures exhibited excellent photocatalytic degradation activity for TC under simulated sunlight. The degradation rate was close to 100% after 30 min of UV light irradiation, and reached 79% only after 60 min of visible light irradiation, which was much better than the photodegradation performance of commercial TiO2 (only 29%). Moreover, the possible intermediates formed during the photocatalytic degradation of TC were explored by the density functional theory calculations and HPLC-MS spectra. Furthermore, two possible degradation routes were proposed, which provided experimental and theoretical support for the photocatalytic degradation of TC. In this study, we provide a new approach for the hierarchical micro/nanostructure of nanoporous TiO2, which can be applied in industrial manufacturing fields.

Construction of novel Ag/AgI/Bi4Ti3O12 plasmonic heterojunction: A study focusing on the performance and mechanism of photocatalytic removal of tetracycline

As a result of the insufficient absorption of visible light, the application of Bi4Ti3O12 in the field of photocatalysis is limited. Ag/AgI was uniformly modified on the surface of the nanoflower bulb of Bi4Ti3O12 by simple precipitation method and photodeposition. The fabricated Ag/AgI/Bi4Ti3O12 obtained an ultra-high tetracycline (TC) removal rate under visible light irradiation. And the synergetic effects caused by the surface plasmon resonance (SPR) effect of Ag, the photosensitivity of AgI and the p-n heterojunction are the key to improving the photocatalytic performance of materials. Besides, four plausible photodegradation pathways of TC were proposed and its intermediates were evaluated for toxicity, showing a significant decrease in toxicity after photoreaction.

Study on the dominant mechanism of direct hole oxidation for the photodegradation of tetracycline

Antibiotic contamination has a significant negative impact on China, one of the largest producers and consumers of antibiotics worldwide. In this study, a three-dimensional flower-like structure of CoFe-LDHs was used to efficiently degrade tetracycline (TC) in a system triggered by peroxymonosulfate (PMS) and exposed to visible light. After exploring the effects of different metal ratios, catalyst dosage, initial TC concentrations, and pH, the optimal reaction conditions were determined. In comparison to pure CoFe-LDHs, the TC elimination rate was dramatically increased by the addition of the PMS. The strong environmental resistance, excellent stability and reusability, and universal flexibility were shown. The quenching experiments and electron spin resonance detection showed that the creation of reactive oxygen species was facilitated by the synergistic transmission of electrons between the active bimetallic components. Further, photogenerated holes was the dominant oxidizing species, which contributed more to the degradation of TC. The potential degradation pathways and intermediate toxicity of TC were suggested. This work offers a new method dominated by photogenerated holes for efficiently removing TC effluent.

Designing advanced S-scheme CdS QDs/La-Bi2WO6 photocatalysts for efficient degradation of RhB

Finding effective strategies to design efficient photocatalysts and decompose refractory organic compounds in wastewater is a challenging problem. Herein, by coupling element doping and constructing heterostructures, S-scheme CdS QDs/La-Bi2WO6 (CS/LBWO) photocatalysts are designed and synthesized by a simple hydrothermal method. As a result, the RhB degradation efficiency of the optimized 5% CS/LBWO reached 99% within 70 min of illumination with excellent stability and recyclability. CS/LBWO shows improvement in the adsorption range of visible light and promotes electron-hole pair generation/migration/separation, attributing the superior degradation performance. The degradation RhB mechanism is proposed by a free radical capture experiment, electron paramagnetic resonance, and high-performance liquid chromatography-mass spectrometry results, indicating that h+ and •O2 - play a significant role during four degradation processes: de-ethylation, chromophore cleavage, ring opening, and mineralization. Based on in situ irradiated X-ray photoelectron spectroscopy, Mulliken electronegativity theory, and the work function results, the S-scheme heterojunction of CS/LBWO promotes the transfer of photogenerated electron-hole pairs and promotes the generation of reactive radicals. This work not only reports that 5% CS/LBWO is a promising photocatalyst for degradation experiments but also provides an approach to design advanced photocatalysts by coupling element doping and constructing heterostructures.

2D/2D Biochar/Bi2WO6 Hybrid Nanosheets with Enhanced Visible-Light-Driven Photocatalytic Activities for Organic Pollutants Degradation

In this work, a novel two-dimensional/two-dimensional (2D/2D) hybrid photocatalyst consisting of Bi2WO6 (BWO) nanosheets and cotton fibers biochar (CFB) nanosheets was successfully prepared via a facile hydrothermal process. The as-prepared photocatalysts were characterized by a variety of techniques, including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectroscopy. It was revealed that amorphous CFB nanosheets were uniformly immobilized on the surface of crystalline BWO nanosheets, and an intimate contact between CFB and BWO was constructed. The photocatalytic activities of the prepared BWO and CFB-BWO photocatalysts were evaluated by photocatalytic degradation of rhodamine B (RhB) and tetracycline hydrochloride (TC-HCl) in aqueous solutions under visible-light irradiation. Compared to the pristine BWO, the CFB-BWO composite photocatalysts exhibited significant enhancement in photocatalytic activities. Among all CFB-BWO samples, the 9CFB-BWO sample with the CFB mass ratio of 9% exhibited optimal photocatalytic activities for RhB or TC-HCl degradation, which was ca. 1.8 times or 2.4 times that of the pristine BWO, respectively. The improvement in photocatalytic activities of the CFB-BWO photocatalysts could be ascribed to the enhanced migration and separation of photogenerated charge carriers due to the formation of a 2D/2D interfacial heterostructure between CFB and BWO. Meanwhile, the possible mechanism of CFB-BWO for enhanced photocatalytic performance was also discussed. This work may provide a new approach to designing and developing novel BWO-based photocatalysts for the highly efficient removal of organic pollutants.

A simple nanocomposite photocatalyst HT-rGO/TiO2 for deoxynivalenol degradation in liquid food

A simple nanocomposite photocatalyst HT-rGO/TiO₂ for deoxynivalenol (DON) degradation was synthesized by hydrothermal method to maintain the quality of cereal grains and byproducts. The characterization of HT-rGO/TiO₂ was analyzed by XRD, FTIR, Raman spectroscopy, and XPS. Moreover, according to UV-vis DRS analysis, HT-rGO/TiO₂ had a smaller band gap, indicating a wider response range to light and a higher utilized rate of quantum photons. Additionally, the results of LC-MS showed that the hydroxyl group at the C3 position, and the unsaturated bond between C9 and C10, and the epoxy group at C12 and C13 positions of DON molecule were destroyed step by step by photocatalytic degradation. These groups have active effects on the DON toxicity, which means it is successful to degrade DON in liquid-food by HT-rGO/TiO₂ photocatalyst.