Fast detection of cocoa shell in cocoa powders by near infrared spectroscopy and multivariate analysis

A decision support tool to analyze the properties of wheat, cocoa beans and mangoes from their NIR spectra

Near infrared spectroscopy (NIRS) is an analytical technique that offers a real advantage over laboratory analysis in the food industry due to its low operating costs, rapid analysis, and non-destructive sampling technique. Numerous studies have shown the relevance of NIR spectra analysis for assessing certain food properties with the right calibration. This makes it useful in quality control and in the continuous monitoring of food processing. However, the NIR calibration process is difficult and time-consuming. Analysis methods and techniques vary according to the configuration of the NIR instrument, the sample to be analyzed and the attribute that is to be predicted. This makes calibration a challenge for many manufacturers. This paper aims to provide a data-driven methodology for developing a decision support tool based on the smart selection of NIRS wavelength to assess various food properties. The decision support tool based on the methodology has been evaluated on samples of cocoa beans, grains of wheat and mangoes. Promising results were obtained for each of the selected models for the moisture and fat content of cocoa beans (R2cv: 0.90, R2test: 0.93, RMSEP: 0.354%; R2cv: 0.73, R2test: 0.79, RMSEP: 0.913%), acidity and vitamin C content of mangoes (R2cv: 0.93, R2test: 0.97, RMSEP: 17.40%; R2cv: 0.66, R2test: 0.46, RMSEP: 0.848%), and protein content of wheat-DS2 (R2cv: 0.90, R2test:0.92, RMSEP: 0.490%) respectively. Moreover, the proposed approach allows results to be obtained that are better than benchmarks for the moisture and protein content of wheat-DS1 (R2cv: 0.90, R2test: 94, RMSEP: 0.337%; R2cv: 0.99, R2test: 0.99, RMSEP: 0.177%), respectively. PRACTICAL APPLICATION: This research introduces a practical tool aimed at determining the quality of food by identifying specific light wavelengths. However, it is important to acknowledge potential challenges, such as overfitting. Before implementation, it is crucial for further research to address and mitigate the issues to ensure the reliability and accuracy of the solution. If successfully applied, this tool could significantly enhance the accuracy of near-infrared spectroscopy in assessing food quality attributes. This advancement would provide invaluable support for decision-making in industries involved in food production, ultimately leading to better overall product quality for consumers.

Detection and quantification of cocoa powder adulteration using Vis-NIR spectroscopy with chemometrics approach

The rising demand for cocoa powder has resulted in an upsurge in market prices, leading to the emergence of adulteration practices aimed at achieving economic benefits. This study aimed to detect and quantify cocoa powder adulteration using visible and near-infrared spectroscopy (Vis-NIRS). The adulterants used in this study were powdered carob, cocoa shell, foxtail millet, soybean, and whole wheat. The NIRS data could not be resolved using Savitzky-Golay smoothing. Nevertheless, the application of a random forest and support vector machine successfully classified the samples with 100% accuracy. Quantification of adulteration using partial least squares (PLS), Lasso, Ridge, elastic Net, and RF regressions provided R2 higher than 0.96 and root mean square error <2.6. Coupling PLS with the Boruta algorithm produced the most reliable regression model (R2 = 1, RMSE = 0.0000). Finally, an online application was prepared to facilitate the determination of adulterants in the cocoa powder.

In situ rapid evaluation method of quality of peach kernels based on near infrared spectroscopy

This study aimed to perform a rapid in situ assessment of the quality of peach kernels using near infrared (NIR) spectroscopy, which included identifications of authenticity, species, and origins, and amygdalin quantitation. The in situ samples without any pretreatment were scanned by a portable MicroNIR spectrometer, while their powder samples were scanned by a benchtop Fourier transform NIR (FT-NIR) spectrometer. To improve the performance of the in situ determination model of the portable NIR spectrometer, the two spectrometers were first compared in identification and content models of peach kernels for both in situ and powder samples. Then, the in situ sample spectra were transferred by using the improved principal component analysis (IPCA) method to enhance the performance of the in situ model. After model transfer, the prediction performance of the in situ sample model was significantly improved, as shown by the correlation coefficient in the prediction set (Rp), root means square error of prediction (RMSEP), and residual prediction deviation (RPD) of the in situ model reached 0.9533, 0.0911, and 3.23, respectively, and correlation coefficient in the test set (Rt) and root means square error of test (RMSET) reached 0.9701 and 0.1619, respectively, suggesting that model transfer could be a viable solution to improve the model performance of portable spectrometers.

Rapid Detection of Total Viable Count in Intact Beef Dishes Based on NIR Hyperspectral Hybrid Model

The total viable count (TVC) of bacteria is an important index to evaluate the freshness and safety of dishes. To improve the accuracy and robustness of spectroscopic detection of total viable bacteria count in a complex system, a new method based on a near-infrared (NIR) hyperspectral hybrid model and Support Vector Machine (SVM) algorithms was developed to directly determine the total viable count in intact beef dish samples in this study. Diffuse reflectance data of intact and crushed samples were tested by NIR hyperspectral and processed using Multiplicative Scattering Correction (MSC) and Competitive Adaptive Reweighted Sampling (CARS). Kennard-Stone (KS) and Samples Set Partitioning Based on Joint X-Y Distance (SPXY) algorithms were used to select the optimal number of standard samples transferred by the model combined with root mean square error. The crushed samples were transferred into the complete samples prediction model through the Direct Standardization (DS) algorithm. The spectral hybrid model of crushed samples and full samples was established. The results showed that the Determination Coefficient of Calibration (RP2) value of the total samples prediction set increased from 0.5088 to 0.8068, and the value of the Root Mean Square Error of Prediction (RMSEP) decreased from 0.2454 to 0.1691 log10 CFU/g. After establishing the hybrid model, the RMSEP value decreased by 9.23% more than before, and the values of Relative Percent Deviation (RPD) and Reaction Error Relation (RER) increased by 12.12% and 10.09, respectively. The results of this study showed that TVC instewed beef samples can be non-destructively determined based on the DS model transfer method combined with the hybrid model strategy. This study provided a reference for solving the problem of poor accuracy and reliability of prediction models in heterogeneous samples.

Rapid determination of the shell content in cocoa products using FT-NIR spectroscopy and chemometrics

The determination of the cocoa shell content is of interest because a high shell content causes a reduction in the quality of cocoa products. Consequently, the aim of the present study was the development of a routinely applicable method for the quantitation of shell material in cocoa nibs. For this, 51 fermented cocoa samples of different varieties from 14 cocoa growing countries covering the crop years 2012-2017 were acquired. Admixtures of cocoa nibs with shell material were prepared in a range of 0-20% cocoa shell and subsequently analysed by Fourier transform near-infrared spectroscopy (FT-NIRS). Support vector machine regression models were created, which enabled the prediction of the cocoa shell content in a mixing ratio range of 0-20% with an RMSE of 2.05% and a R² of 0.88 and in a range of 0-10% with an RMSE of 1.70% and a R² of 0.72. This predictive capability suggests that the presented method is suitable for rapid determination of cocoa shell content in cocoa nibs. In addition, it was demonstrated that the method is applicable to other relevant cocoa matrices, as the prediction of the shell content of several industrial cocoa masses by the FT-NIRS-based model showed good consistency with the prediction by liquid chromatography-mass spectrometry. This emphasizes that FT-NIRS combined with chemometrics has great potential for the determination of cocoa shell content in cocoa nibs and cocoa masses in routine analysis, such as incoming inspection.

Handheld and benchtop vis/NIR spectrometer combined with PLS regression for fast prediction of cocoa shell in cocoa powder

The fermented and dried cocoa beans are peeled, either before or after the roasting process, as peeled nibs are used for chocolate production, and shell content in cocoa powders may result from economically motivated adulteration (EMA), cross-contamination or misfits in equipment in the peeling process. The performance of this process is carefully evaluated, as values above 5% (w/w) of cocoa shell can directly affect the sensory quality of cocoa products. In this study chemometric methods were applied to near-infrared (NIR) spectra from a handheld (900-1700 nm) and a benchtop (400-1700 nm) spectrometers to predict cocoa shell content in cocoa powders. A total of 132 binary mixtures of cocoa powders with cocoa shell were prepared at several proportions (0 to 10% w/w). Partial least squares regression (PLSR) was used to develop the calibration models and different spectral preprocessing were investigated to improve the predictive performance of the models. The ensemble Monte Carlo variable selection (EMCVS) method was used to select the most informative spectral variables. Based on the results obtained with both benchtop (R²_P = 0.939, RMSE_P = 0.687% and RPD_P = 4.14) and handheld (R²_P = 0.876, RMSE_P = 1.04% and RPD_P = 2.82) spectrometers, NIR spectroscopy combined with the EMCVS method proved to be a highly accurate and reliable tool for predicting cocoa shell in cocoa powder. Even with a lower predictive performance than the benchtop spectrometer, the handheld spectrometer has potential to specify whether the amount of cocoa shell present in cocoa powders is in accordance with the Codex Alimentarius specifications.

Quality Evaluation of Fair-Trade Cocoa Beans from Different Origins Using Portable Near-Infrared Spectroscopy (NIRS)

Determining cocoa bean quality is crucial for many players in the international supply chain. However, actual methods rely on a cut test protocol, which is limited by its subjective nature, or on time-consuming, expensive and destructive wet-chemistry laboratory procedures. In this context, the application of near infrared (NIR) spectroscopy, particularly with the recent developments of portable NIR spectrometers, may represent a valuable solution for providing a cocoa beans' quality profile, in a rapid, non-destructive, and reliable way. Monitored parameters in this work were dry matter (DM), ash, shell, fat, protein, total polyphenols, fermentation index (FI), titratable acidity (TA) and pH. Different chemometric analyses were performed on the spectral data and calibration models were developed using modified partial least squares regression. Prediction equations were validated using a fivefold cross-validation and a comparison between the different prediction performances for the portable and benchtop NIR spectrometers was provided. The NIRS benchtop instrument provided better performance of quantification considering the whole than the portable device, showing excellent prediction capability in protein and DM quantification. On the other hand, the NIRS portable device, although showing lower but valuable performance of prediction, can represent an appealing alternative to benchtop instruments for food business operators, being applicable in the field.

Detection Method for Walnut Shell-Kernel Separation Accuracy Based on Near-Infrared Spectroscopy

In this study, Near-infrared (NIR) spectroscopy was adopted for the collection of 1200 spectra of three types of walnut materials after breaking the shells. A detection model of the walnut shell-kernel separation accuracy was established. The preprocessing method of de-trending (DT) was adopted. A classification model based on a support vector machine (SVM) and an extreme learning machine (ELM) was established with the principal component factor as the input variable. The effect of the penalty value (C) and kernel width (g) on the SVM model was discussed. The selection criteria of the number of hidden layer nodes (L) in the ELM model were studied, and a genetic algorithm (GA) was used to optimize the input layer weight (W) and the hidden layer threshold value (B) of the ELM. The results revealed that the classification accuracy of SVM and ELM models for the shell, kernel, and chimera was 97.78% and 97.11%. The proposed method can serve as a reference for the detection of walnut shell-kernel separation accuracy.

A comprehensive insight on modern green analyses for quality control determination and processing monitoring in coffee and cocoa seeds

Green analysis is defined as the analysis of chemicals in a manner where sample extraction and analysis are performed with least amounts of steps, low hazardous materials, while maintaining efficiency in terms of analytes detection. Coffee and cocoa represent two of the most popular and valued beverages worldwide in addition to their several products i.e., cocoa butter, chocolates. This study presents a comprehensive overview of green methods used to evaluate cocoa and coffee seeds quality compared to other conventional techniques highlighting advantages and or limitations of each. Green techniques discussed in this review include solid phase microextraction, spectroscopic techniques i.e., infra-red (IR) spectroscopy and nuclear magnetic resonance (NMR) besides, e-tongue and e-nose for detection of flavor. The employment of multivariate data analysis in data interpretation is also highlighted in the context of identifying key components pertinent to specific variety, processing method, and or geographical origin.

Differentiation of Organic Cocoa Beans and Conventional Ones by Using Handheld NIR Spectroscopy and Multivariate Classification Techniques

The global market for organic cocoa beans continues to show sturdy growth. A low-cost handheld NIR spectrometer (900-1700 nm) combined with multivariate classification algorithms was used for rapid differentiation analysis of organic cocoa beans' integrity. In this research, organic and conventionally cultivated cocoa beans were collected from different locations in Ghana and scanned nondestructively with a handheld spectrometer. Different preprocessing treatments were employed. Principal component analysis (PCA) and classification analysis, RF (random forest), KNN (K-nearest neighbours), LDA (linear discriminant analysis), and PLS-DA (partial least squares-discriminant analysis) were performed comparatively to build classification models. The performance of the models was evaluated by accuracy, specificity, sensitivity, and efficiency. Second derivative preprocessing together with PLS-DA algorithm was superior to the rest of the algorithms with a classification accuracy of 100.00% in both the calibration set and prediction set. Second derivative algorithm was found to be the best preprocessing tool. The identification rates for the calibration set and prediction set were 96.15% and 98.08%, respectively, for RF, 91.35% and 92.31% for KNN, and 90.38% and 98.08% for LDA. Generally, the results showed that a handheld NIR spectrometer coupled with an appropriate multivariate algorithm could be used in situ for the differentiation of organic cocoa beans from conventional ones to ensure food integrity along the cocoa bean value chain.

Bioactive compounds and techno-functional properties of high-fiber co-products of the cacao agro-industrial chain

The cacao shell (CS) and cacao pod husk (CPH), two of the most promising high-fiber co-products of the cacao agro-industrial chain, were evaluated to determine their potential incorporation into food products. This research determined bioactive compounds and techno-functional properties of CS and CPH, and was evaluated the enzymatic inactivation by thermal treatments in CPH. We found that CS is rich in protein, lipids, dietary fiber (48.1 ± 0.3 g 100 gdw -1), and antioxidant molecules such as epicatechin (1.10 ± 0.02 mg g-1) and isoquercetin (1.04 ± 0.09 mg g-1). Moreover, in CS a positive effect of hydration mechanism occur; in fact, it was observed a reduction of Lightness (L∗) value and a remarkable color difference (ΔE∗,18.8 ± 0.7) (CIEL∗a∗b∗ color space), between hydrated and dry CS samples; so, it could be used as a potential natural colorant in foods. CPH resulted equally rich in dietary fiber (35.3-37.4%) and flavonoids (2.9 ± 0.1 mg RE g-1); in this co-product, the rapid enzymatic inactivation by thermal treatments was essential to obtain the highest antioxidant activity and polyphenols content; regarding the techno-functional properties, it was found that CPH flour had high hydration capacity, so CPH can use it as a replacement for emulsifiers or water holding additives while incorporating the fiber and abundantly found antioxidants.

Robust prediction performance of inner quality attributes in intact cocoa beans using near infrared spectroscopy and multivariate analysis

Fast and simultaneous determination of inner quality parameters, such as fat and moisture contents, need to be predicted in cocoa products processing. This study aimed to employ the near-infrared reflectance spectroscopy (NIRS) in predicting the quality mentioned above parameters in intact cocoa beans. Near-infrared spectral data, in a wavelength ranging from 1000 to 2500 nm, were acquired for a total of 110 bulk cocoa bean samples. Actual fat and moisture contents were measured with standard laboratory procedures using the Soxhlet and Gravimetry methods, respectively. Two regression approaches, namely principal component regression (PCR) and partial least square regression (PLSR), were used to develop the prediction models. Furthermore, four different spectra correction methods, namely multiple scatter correction (MSC), de-trending (DT), standard normal variate (SNV), and orthogonal signal correction (OSC), were employed to enhance prediction accuracy and robustness. The results showed that PLSR was better than PCR for both quality parameters prediction. Spectra corrections improved prediction accuracy and robustness, while OSC was the best correction method for fat and moisture content prediction. The maximum correlation of determination (R²) and residual predictive deviation (RPD) index for fat content were 0.86 and 3.16, while for moisture content prediction, the R² coefficient and RPD index were 0.92 and 3.43, respectively. Therefore, NIRS combined with proper spectra correction method can be used to rapidly and simultaneously predict inner quality parameters of intact cocoa beans.

Potential of smartphone-coupled micro NIR spectroscopy for quality control of green tea

Green tea adulterated with sugar and glutinous rice flour has an increased sensitivity to water, which affects the safety of the tea. A total of 475 samples of pure tea, sugar-adulterated tea, and glutinous-rice-flour-adulterated tea were prepared and scanned using micro near infrared spectroscopy (NIRS). The collected NIRS data were qualitatively and quantitatively detected by a multi-layer algorithm model. Principal component analysis indicated that the three sample groups had an obvious separation trend. The discriminate rate of the optimal qualitative model, namely support vector machine, was 97.47% for the prediction set. A total of three wavelength selection methods were used to improve the performances of partial least squares regression and support vector machine regression (SVR) models. The nonlinear SVR models based on characteristic wavelengths selected by iteratively retaining informative variables algorithm provided satisfactory results for the identification of sugar and glutinous rice flour adulteration. The correlation coefficients for prediction (Rp) were >0.94, and the residual prediction deviation were >3. The results indicated that smartphone-based micro NIRS can be effectively used to qualitatively and quantitatively analyze adulterants in green tea.

NIR and MIR spectroscopy for quick detection of the adulteration of cocoa content in chocolates

The Near (NIR) and Mid (MIR) Infrared Spectroscopy associated with chemometric techniques were used to determine the cocoa solids content in chocolates and detect possible adulterations. Five chocolate formulations (30% to 90%) were produced with different cocoa solids concentrations and 110 commercial samples from 10 different countries with varying concentrations of cocoa solids (30% to 88%) were acquired. All repetions of the produced and commercial chocolates were evaluated using NIR and MIR. Spectroscopic data were submitted to multivariate techniques of Principal Component Analysis (PCA) and Partial Least Squares Regression (PLS). For both spectroscopy techniques, the PCA of the 5 formulations formed 5 distinct groups regarding the cocoa solids and the commercial samples showed a behavior pattern similar to the produced samples. For PLS, the regression equations showed high predictive capacity, with correlation coefficients above 90 and RMSECV values of 0.70 and 1.22, for NIR and MIR, respectively. These models highlighted, approximately, 14% of the commercial samples as possible adulterated products.

QCM Sensor Arrays, Electroanalytical Techniques and NIR Spectroscopy Coupled to Multivariate Analysis for Quality Assessment of Food Products, Raw Materials, Ingredients and Foodborne Pathogen Detection: Challenges and Breakthroughs

Quality checks, assessments, and the assurance of food products, raw materials, and food ingredients is critically important to ensure the safeguard of foods of high quality for safety and public health. Nevertheless, quality checks, assessments, and the assurance of food products along distribution and supply chains is impacted by various challenges. For instance, the development of portable, sensitive, low-cost, and robust instrumentation that is capable of real-time, accurate, and sensitive analysis, quality checks, assessments, and the assurance of food products in the field and/or in the production line in a food manufacturing industry is a major technological and analytical challenge. Other significant challenges include analytical method development, method validation strategies, and the non-availability of reference materials and/or standards for emerging food contaminants. The simplicity, portability, non-invasive, non-destructive properties, and low-cost of NIR spectrometers, make them appealing and desirable instruments of choice for rapid quality checks, assessments and assurances of food products, raw materials, and ingredients. This review article surveys literature and examines current challenges and breakthroughs in quality checks and the assessment of a variety of food products, raw materials, and ingredients. Specifically, recent technological innovations and notable advances in quartz crystal microbalances (QCM), electroanalytical techniques, and near infrared (NIR) spectroscopic instrument development in the quality assessment of selected food products, and the analysis of food raw materials and ingredients for foodborne pathogen detection between January 2019 and July 2020 are highlighted. In addition, chemometric approaches and multivariate analyses of spectral data for NIR instrumental calibration and sample analyses for quality assessments and assurances of selected food products and electrochemical methods for foodborne pathogen detection are discussed. Moreover, this review provides insight into the future trajectory of innovative technological developments in QCM, electroanalytical techniques, NIR spectroscopy, and multivariate analyses relating to general applications for the quality assessment of food products.

Total lipid prediction in single intact cocoa beans by hyperspectral chemical imaging

•

Quantitative calibrations were built from shelled and in-shell single cocoa beans by HSI.

•

The fat content of commercial batches of cocoa beans varies by up to 15% within batches.

•

HSI prediction of the total lipid content was successful for shelled and unshelled beans.

•

Segregation using HSI fat calibration enhanced cocoa bean fat content by 6%.

This work aimed to explore the possibility of predicting total fat content in whole dried cocoa beans at a single bean level using hyperspectral imaging (HSI).

170 beans randomly selected from 17 batches were individually analysed by HSI and by reference methodology for fat quantification. Both whole (i.e. in-shell) beans and shelled seeds (cotyledons) were analysed. Partial Least Square (PLS) regression models showed good performance for single shelled beans (R² = 0.84, external prediction error of 2.4%). For both in-shell beans a slightly lower prediction error of 4.0% and R² = 0.52 was achieved, but fat content estimation is still of interest given its wide range. Beans were manually segregated, demonstrating an increase by up to 6% in the fat content of sub-fractions.

HSI was shown to be a valuable technique for rapid, non-contact prediction of fat content in cocoa beans even from scans of unshelled beans, enabling significant practical benefits to the food industry for quality control purposes and for obtaining a more consistent raw material.

Detection of fraud in high-quality rice by near-infrared spectroscopy

A key feature of food fraud is the use of a lower value ingredient to imitate an authentic product. This study was based on near-infrared spectroscopy (NIRS) analysis technology, partial least squares discriminant analysis (PLS-DA), and a support vector machine (SVM) to detect whether high-quality rice was mixed with other varieties of rice. As an aid to qualitative discrimination, PLS was used to establish the quantitative analysis model to assist in the recognition of the degree of fraud. Due to the direct correlation between the results of NIRS analysis and the homogeneity of the samples, four groups of samples with different physical forms (full granules, 40 mesh, 70 mesh, and 100 mesh) were prepared, each group consisted of 20 pure samples and 140 mixed samples, and the mixing ratio was between 5% and 50%, with an interval of 5%. Regarding qualitative analysis, the performance of the model has no obvious relationship with the physical state of the sample, the qualitative model of PLS-DA and SVM can detect the fraudulent rice with a 5% detection limit, respectively. Regarding quantitative analysis, the performance of the prediction model was closely related to the particle size of the samples: 100 mesh > 70 mesh > 40 mesh > full grains. The determination coefficient and root mean square errors of the optimal prediction result were 0.96 and 2.93, respectively. These results demonstrate that NIRS analysis technology is a reliable and fast tool to determine whether high-quality rice contains other varieties of rice. PRACTICAL APPLICATION: The work of this article is based on the current background of increasingly serious rice fraud, using near-infrared spectroscopy to quickly identify fraudulent rice, to a certain extent, and effectively alleviate the rice fraud. This technology can serve for the supervision of food regulatory agencies on rice fraud, and can also be used in food factories to ensure the authenticity of raw materials of rice.

Food Authentication: Truffle (Tuber spp.) Species Differentiation by FT-NIR and Chemometrics

Truffles are certainly the most expensive mushrooms; the price depends primarily on the species and secondly on the origin. Because of the price differences for the truffle species, food fraud is likely to occur, and the visual differentiation is difficult within the group of white and within the group of black truffles. Thus, the aim of this study was to develop a reliable method for the authentication of five commercially relevant truffle species via Fourier transform near-infrared (FT-NIR) spectroscopy as an easy to handle approach combined with chemometrics. NIR-data from 75 freeze-dried fruiting bodies were recorded. Various spectra pre-processing techniques and classification methods were compared and validated using nested cross-validation. For the white truffle species, the most expensive Tuber magnatum could be differentiated with an accuracy of 100% from Tuber borchii. Regarding the black truffle species, the relatively expensive Tuber melanosporum could be distinguished from Tuber aestivum and the Chinese truffles with an accuracy of 99%. Since the most expensive Italian Tuber magnatum is highly prone to fraud, the origin was investigated and Italian T. magnatum truffles could be differentiated from non-Italian T. magnatum truffles by 83%. Our results demonstrate the potential of FT-NIR spectroscopy for the authentication of truffle species.

Effect of Fermentation, Drying and Roasting on Biogenic Amines and Other Biocompounds in Colombian Criollo Cocoa Beans and Shells

The composition of microbiota and the content and pattern of bioactive compounds (biogenic amines, polyphenols, anthocyanins and flavanols), as well as pH, color, antioxidant and reducing properties were investigated in fermented Criollo cocoa beans and shells. The analyses were conducted after fermentation and drying (T1) and after two thermal roasting processes (T2, 120 °C for 22 min; T3, 135 °C for 15 min). The fermentation and drying practices affected the microbiota of beans and shells, explaining the great variability of biogenic amines (BAs) content. Enterobacteriaceae were counted in a few samples with average values of 10³ colony forming units per gram (CFU g⁻¹), mainly in the shell, while Lactobacillus spp. was observed in almost all the samples, with the highest count in the shell with average values of 10⁴ CFU g⁻¹. After T1, the total BAs content was found to be in a range of 4.9÷127.1 mg kg⁻¹_DFW; what was remarkable was the presence of cadaverine and histamine, which have not been reported previously in fermented cocoa beans. The total BAs content increased 60% after thermal treatment T2, and of 21% after processing at T3, with a strong correlation (p < 0.05) for histamine (ß = 0.75) and weakly correlated for spermidine (ß = 0.58), spermine (ß = 0.50), cadaverine (ß = 0.47) and serotonine (ß = 0.40). The roasting treatment of T3 caused serotonin degradation (average decrease of 93%) with respect to unroasted samples. However, BAs were detected in a non-alarming concentration (e.g., histamine: n.d ÷ 59.8 mg kg⁻¹_DFW; tyramine: n.d. ÷ 26.5 mg kg⁻¹_DFW). Change in BAs level was evaluated by principal component analysis. PC1 and PC2 explained 84.9% and 4.5% of data variance, respectively. Antioxidant and reducing properties, polyphenol content and BAs negatively influenced PC1 with both polyphenols and BA increasing during roasting, whereas PC1 was positively influenced by anthocyanins, catechin and epicatechin.

Cocoa Bean Shell-A By-Product with Nutritional Properties and Biofunctional Potential

Cocoa bean shells (CBS) are one of the main by-products from the transformation of cocoa beans, representing 10%‒17% of the total cocoa bean weight. Hence, their disposal could lead to environmental and economic issues. As CBS could be a source of nutrients and interesting compounds, such as fiber (around 50% w/w), cocoa volatile compounds, proteins, minerals, vitamins, and a large spectrum of polyphenols, CBS may be a valuable ingredient/additive for innovative and functional foods. In fact, the valorization of food by-products within the frame of a circular economy is becoming crucial due to economic and environmental reasons. The aim of this review is to look over the chemical and nutritional composition of CBS and to revise the several uses that have been proposed in order to valorize this by-product for food, livestock feed, or industrial usages, but also for different medical applications. A special focus will be directed to studies that have reported the biofunctional potential of CBS for human health, such as antibacterial, antiviral, anticarcinogenic, antidiabetic, or neuroprotective activities, benefits for the cardiovascular system, or an anti-inflammatory capacity.

Food Targeting: Determination of the Cocoa Shell Content (Theobroma cacao L.) in Cocoa Products by LC-QqQ-MS/MS

A targeted metabolomics LC-ESI-QqQ-MS/MS application for the determination of cocoa shell based on 15 non-polar key metabolites was developed, validated according to recognized guidelines, and used to predict the cocoa shell content in various cocoa products. For the cocoa shell prediction, different PLSR models based on different cocoa shell calibration series were developed and their suitability and prediction quality were compared. By analysing samples from different origins and harvest years with known shell content, the prediction model could be confirmed. The predicted shell content could be verified with a deviation of about 1% cocoa shell. The presented method demonstrates the suitability of the targeted application of metabolomic profiling for the determination of cocoa shell and its applicability in routine analysis is discussed.

Combining near-infrared hyperspectral imaging with elemental and isotopic analysis to discriminate farm-raised pacific white shrimp from high-salinity and low-salinity environments

White shrimp (Litopenaeus vannamei) raised in low-salinity farm are considered inferior to those in seawater. In order to develop a rapid discrimination method for the food industry, we investigated the potential of using near-infrared hyperspectral imaging to discriminate shrimp muscle samples from freshwater and seawater farms. We constructed 3 different discrimination models with 4 optimal wavelength selection methods and compared the performance of each model. The results showed that sequential forward selection combined with partial least squares discriminant analysis (SFS-PLS-DA) generated the best discrimination performance with an overall accuracy of 99.2%. The elemental and isotopic analysis indicated a high correlation between 918 and 925 nm region (which was selected by SFS) and ¹³C concentration. This agrees with the fact that there is more ¹³C in shrimp of salty water compared to those of freshwater. The results demonstrated (hyperspectral imaging) HSI is promising to discriminate L. vannamei raised in fresh and seawater environments.