Quantification and risk assessment of carcinogenic polycyclic aromatic hydrocarbons in retail smoked fish and smoked cheeses

Review of the Terminology, Approaches, and Formulations Used in the Guidelines on Quantitative Risk Assessment of Chemical Hazards in Food

This paper reviews the published terminology, mathematical models, and the possible approaches used to characterise the risk of foodborne chemical hazards, particularly pesticides, metals, mycotoxins, acrylamide, and polycyclic aromatic hydrocarbons (PAHs). The results confirmed the wide variability of the nomenclature used, e.g., 28 different ways of referencing exposure, 13 of cancer risk, or 9 of slope factor. On the other hand, a total of 16 equations were identified to formulate all the risk characterisation parameters of interest. Therefore, the present study proposes a terminology and formulation for some risk characterisation parameters based on the guidelines of international organisations and the literature review. The mathematical model used for non-genotoxic hazards is a ratio in all cases. However, the authors used the probability of cancer or different ratios, such as the margin of exposure (MOE) for genotoxic hazards. For each effect studied per hazard, the non-genotoxic effect was mostly studied in pesticides (79.73%), the genotoxic effect was mostly studied in PAHs (71.15%), and both effects were mainly studied in metals (59.4%). The authors of the works reviewed generally opted for a deterministic approach, although most of those who assessed the risk for mycotoxins or the ratio and risk for acrylamide used the probabilistic approach.

Microemulsions of Nonionic Surfactant with Water and Various Homologous Esters: Preparation, Phase Transitions, Physical Property Measurements, and Application for Extraction of Tricyclic Antidepressant Drugs from Aqueous Media

Microemulsions are nanocolloidal systems composed of water, an oil, and a surfactant, sometimes with an additional co-surfactant, which have found a wide range of practical applications, including the extractive removal of contaminants from polluted water. In this study, microemulsion systems, including a nonionic surfactant (Brij 30), water, and esters selected from two homologous series of C1-C6 alkyl acetates and ethyl C1-C4 carboxylates, respectively, were prepared by the surfactant titration method. Phase transitions leading to the formation of Winsor II and Winsor IV microemulsions were observed and phase diagrams were constructed. The dependences of phase transitions on the salinity and pH and the addition of isopropanol as a co-surfactant were also investigated. Some physical properties, namely density, refractive index, electrical conductivity, dynamic viscosity, and particle size, were measured for a selection of Winsor IV microemulsions, providing further insight into some other phase transitions occurring in the monophasic domains of phase diagrams. Finally, Winsor II microemulsions were tested as extraction solvents for the removal of four tricyclic antidepressant drugs from aqueous media. Propyl acetate/Brij 30/H2O microemulsions provided the best extraction yields (>90%), the highest Nernst distribution coefficients (~40-88), and a large volumetric ratio of almost 3 between the recovered purified water and the resulting microemulsion extract. Increasing the ionic strength (salinity) or the pH of the aqueous antidepressant solutions led to an improvement in extraction efficiencies, approaching 100%. These results could be extrapolated to other classes of pharmaceutical contaminants and suggest ester- and nonionic surfactant-based microemulsions are a promising tool for environmental remediation.

Determination of Four PAHs and Formaldehyde in Traditionally Smoked Chicken Products

The present study was conducted to analyze the level of four priority polycyclic aromatic hydrocarbons (PAHs), including benzo[a]pyrene (BaP), chrysene (Chr), benzo[a]anthracene (BaA), and benzo[b]fluoranthene (BbF), in traditionally smoked chicken products marketed in China. The results show that the amount of ƩPAH4 (the sum of four different PAHs: BaP, Chr, BaA, and BbF) was 30.43-225.17 and 18.75-129.54 µg/kg in the skin and meat of smoked chicken products, respectively. The content of ƩPAH4 in the smoked skin was significantly higher as compared to the smoked meat (p < 0.05). The calculation of MOE (margin of exposure) results suggested the possibilities of ingestion risk associated with the consumption of smoked chicken skin. Furthermore, the formaldehyde content in the skin of smoked chicken was 2.17-6.84 mg/kg and 0.86-2.95 mg/kg in the smoked meat. These results indicate that optimization or alternative methods for food processing should be developed to reduce the high level of harmful substances formed during processing to ensure the safety of smoked chicken products. Moreover, along with harmful substances, the moisture content and color of traditionally smoked chicken were analyzed to provide a practical reference for healthy, safe and green processing technology for smoked chicken.

Curcumin: Overview of Extraction Methods, Health Benefits, and Encapsulation and Delivery Using Microemulsions and Nanoemulsions

Curcumin is the principal curcuminoid found in the rhizomes of turmeric. Due to its therapeutic action against cancer, depression, diabetes, some bacteria, and oxidative stress, it has been used widely in medicine since ancient times. Due to its low solubility, the human organism cannot completely absorb it. Advanced extraction technologies, followed by encapsulation in microemulsion and nanoemulsion systems, are currently being used to improve bioavailability. This review discusses the different methods available for curcumin extraction from plant material, methods for the identification of curcumin in the resulting extracts, its beneficial effects on human health, and the encapsulation techniques into small colloidal systems that have been used over the past decade to deliver this compound.

Rapid Determination of Oxygenated and Parent Polycyclic Aromatic Hydrocarbons in Milk Using Supercritical Fluid Chromatography-Mass Spectrometry

Liquid milks are consumed worldwide in large amounts, especially by adolescents and infants. Thus, their health quality linked with polycyclic aromatic hydrocarbon (PAH) contamination has attracted great concern. This study developed a rapid and sensitive supercritical fluid chromatography (SFC)-MS method to determine two typical oxygenated PAHs (OPAHs) and EU 15+1PAHs except for benzo[k]fluoranthene (BkF) in three types of liquid milks: 10 ultra heat treated (UHT) milks, 8 pasteurized milks, and 4 extended-shelf-life pasteurized milks. The instrumental analysis was 15 min with a recovery of 67.66-118.46%, a precision of 1.45-14.68%, detection limits of 0.04-0.24 μg/kg, and quantification limits of 0.13-0.78 μg/kg. We found 9-fluorenone, anthraquinone, 15 EU priority PAHs, and benzo[a]pyrene toxic equivalent quantity (BaPeq) in the 22 milk samples, which were 0.32-1.56 μg/kg, 0.40-1.74 μg/kg, 0.57-8.48 μg/kg, and 0.01-17.42 μg/kg, respectively. The UHT milks and whole fat milks showed higher PAH concentrations than other investigated samples, where the maximum levels of BaP and PAH4 were 0.77 and 3.61 μg/kg, respectively. PAH4 dominantly contributed to the PAH8 concentration and was detected in 73% and 32% of samples at more than 1.0 and 2.0 μg/kg, respectively. The results suggest that raw milks should be strictly monitored and extensively investigated for PAH4 and BaP concentrations for future risk assessment, limitations, and dietary guidance.

Determination of polycyclic aromatic hydrocarbons using different extraction methods and HPLC-FLD detection in smoked and grilled meat products

Polycyclic aromatic hydrocarbons (PAHs) in meat products are formed, among others, as a by-product of thermal processing such as smoking or grilling. Due their highly toxic effects on the human organism, it is necessary to monitor PAH content in food products and develop appropriate analytical methods for their determination. The aim of this study was to compare PAH content in meat products subjected to smoking or grilling process. PAH content was determined using three different analytical methods, verified for efficiency using the external standard method. The results showed that smoking led to higher PAH contamination compared to grilling. Extraction by saponification and SPE method was the most effective for the detection and quantification of PAHs. The samples analyzed using this method showed the highest PAH content and recoveries. The results of the study showed a significant effect of the extraction method on the recovery levels and PAH content in meat.

Simultaneous Determination of Multi-Class Pesticide Residues and PAHs in Plant Material and Soil Samples Using the Optimized QuEChERS Method and Tandem Mass Spectrometry Analysis

New analytical approaches to the simultaneous identification and quantification of 94 pesticides and 13 polycyclic aromatic hydrocarbons (PAHs) in five representative matrices (pepper, apple, lettuce, wheat, and soil) were developed. The analyses were based on gas chromatography coupled with triple quadrupole tandem mass spectrometry (GC-MS/MS). The procedure was optimized by changing the solvent used during the extraction, from acetonitrile to the acetone: n-hexane mixture at a volume ratio of 1:4 (v/v), as well as the use of a reduced amount of water during the extraction of compounds from cereals. An additional modification was the use of florisil instead of GCB in the sample cleanup step. A full method validation study was performed, at two concentration levels (LOQ and 1000 × LOQ), which showed satisfactory results for all analytes from the PAHs group, with recoveries ranging from 70.7-115.1%, and an average RSD of 3.9%. Linearity was tested in the range of 0.001-1.000 mg/kg and showed coefficients of determination (R²) ≥ 0.99 for all PAHs. Satisfactory recovery and precision parameters (LOQ and 100 × LOQ) were achieved for almost all analytes from the pesticide group in the range of 70.1-119.3% with the mean RSD equal to 5.9%. The observed linearity for all analytes in the concentration range of 0.005-1.44 mg/kg was R² ≥ 0.99, with the exception of famoxadone, chizalofop-p-ethyl, prothioconazole, spirodiclofen, tefluthrin, and zoxamid. The extended uncertainties were estimated, using a top-down approach of 9.9% (average) and 15.3% (average) for PAHs and pesticides samples, respectively (the coverage factor k = 2, the 95% confidence level). Ultimately, the method was successfully applied to determine pesticide residues in commercial samples of fruit, vegetables and grain, and soil samples for PAHs, which were collected from selected places in the Podkarpacie region. A total of 38 real samples were tested, in which 10 pesticides and 13 PAHs were determined. Proposed changes allow us to shorten the sample preparation time (by 20%) and to reduce the consumption of organic solvents (by 17%). The use of florisil for sample cleanup, instead of GCB, improves the recovery of compounds with flat particles.

Chemical hazards in smoked meat and fish

This review aims to give an insight into the main hazards currently found in smoked meat and fish products. Literature research was carried out on international databases such as Access to Global Online Research in Agriculture (AGORA) database, Science direct, and Google scholar to collect and select 92 relevant publications included in this review. The smoking process was described and five hazards mostly found in smoked fish and meat were presented. The heat-induced compounds such as polycyclic aromatic hydrocarbons, heterocyclic amines, and nitrosamines were found in smoked fish and meat. Other hazards such as biogenic amines and heavy metals were also present in smoked fish and meat. The levels of these hazards reported from the literature exceeded the maximal limits of European Union. A brief description of risk assessment methodology applicable to such toxic compounds and risk assessment examples was also presented in this review. As most of the hazards reported in this review are toxic and even carcinogenic to humans, actions should be addressed to reduce their presence in food to protect consumer health and to prevent public health issue.