The impact of rhamnogalacturonan-I side chain monosaccharides on the rheological properties of citrus pectin

Arabinan branches in the RG-I region of citrus pectin aid acid-induced gelation

Gelation is a critical property of citrus pectin. However, the roles played by neutral sugar side-chains on acid-induced pectin gelation remain poorly understood. Herein, galactan- or/and arabinan-eliminated pectins (P-G, P-A, and P-AG) were used to investigate the effects of side-chains on gelation. The gel hardness values of citrus pectin, P-G, P-A, and P-AG were 42.6, 39.9, 5.3, and 2.1 g, respectively, suggesting that arabinan contributed more to gelation than galactan. We next found that arabinan branches promoted pectin chain entanglement more effectively than arabinan backbones. Destabilizer addition experiments showed that hydrogen bonding, electrostatic interaction, and hydrophobic interaction were the main forces affecting pectin gel networks and strength, which was further validated by molecular dynamic simulations. The total number of hydrogen bonds between the arabinan branches and galactan/HG (65.7) was significantly higher than that between the arabinan backbones and galactan/HG (39.1), indicating that arabinan branches predominated in terms of such interactions. This study thus elucidated the roles played by neutral-sugar side-chains, especially the arabinan branches of acid-induced pectin gels, in term of enhancing high-methoxyl pectin gelation, and offers novel insights into the structure-gelling relationships of citrus pectin.

Pectin-mucin interactions: Insights from fluorimetry, thermodynamics and dual (static and dynamic) quenching mechanisms

Binary systems of citrus peel pectin (a major food carbohydrate) and mucin (a principal oral-gastrointestinal glycoprotein) are studied, as to understand the interactions and thermodynamics between food and biofluids during oral processing and digestion. The fluorimetry emission spectra of mucin were quenched by pectin addition at 293, 301, 310 and 318 K, indicating direct contact between the two macromolecular populations. A red shift, suggesting pectin-induced alterations on mucin conformation, has been observed at 318 K. Intensity-based Stern - Volmer plots fitted second-order polynomial equations, suggesting the coexistence of both static and dynamic quenching, while the increase of the slopes with temperature points to the predominance of dynamic phenomena. Time-resolved fluorescence measurements also point to dynamic quenching related to transient interactions, rather than to specific bonding. Thermodynamic analysis yields negative free energy changes in all cases, with positive changes for enthalpy and large positive values for TΔS. These are in agreement with the Stern - Volmer analysis, suggesting the predominance of transient, dynamic (here entropic) interactions. These provide an image of mucin interacting with pectin macromolecules during the oral processing and digestion of foods, and can relate to the texture, flavor (e.g. astringency) and bioavailability of polysaccharide-based foods.

Structural and rheological properties of diluted alkali soluble pectin from apple and carrot

Pectin, a complex polysaccharide found in plant cell walls, plays a crucial role in various industries due to its functional properties. The diluted alkali-soluble pectin (DASP) fractions that result from the stepwise extraction of apples and carrots were studied to evaluate their structural and rheological properties. Homogalacturonan and rhamnogalacturonan I, in different proportions, were the main pectin domains that composed DASP from both materials. Atomic force microscopy revealed that the molecules of apple DASP were longer and more branched. A persistence length greater than 40 nm indicated that the pectin molecules deposited on mica behaved as stiff molecules. The weight-averaged molar mass was similar for both samples. Intrinsic viscosity values of 194.91 mL·g-1 and 186.79 mL·g-1 were obtained for apple and carrot DASP, respectively. Rheological measurements showed greater structural strength for apple-extracted pectin, whereas carrot pectin was characterized by a higher linear viscoelasticity limit. This comparison showed that the pectin fractions extracted by diluted alkali are structurally different and have different rheological properties depending on their botanical origin. The acquired insights can enhance the customized use of pectin residue and support further investigations in industries relying on pectin applications.

Effect of enzymatic modification on the structure and rheological properties of diluted alkali-soluble pectin fraction rich in RG-I

This study focuses on pectin covalently linked in cell walls from two sources, apples and carrots, that was extracted using diluted alkali, and it describes changes in the rheological properties of diluted alkali-soluble pectin (DASP) due to enzymatic treatment. Given DASP's richness of rhamnogalacturonan I (RG-I), RG-I acetyl esterase (RGAE), rhamnogalacturonan endolyase (RGL), and arabinofuranosidase (ABF) were employed in various combinations for targeted degradation of RG-I pectin chains. Enzymatic degradations were followed by structural studies of pectin molecules using atomic force microscopy (AFM) as well as measurements of rheological and spectral properties. AFM imaging revealed a significant increase in the length of branched molecules after incubation with ABF, suggesting that arabinose side chains limit RG-I aggregation. Structural modifications were confirmed by changes in the intensity of bands in the pectin fingerprint and anomeric region on Fourier transform infrared spectra. ABF treatment led to a decrease in the stability of pectic gels, while the simultaneous use of ABF, RGAE, and RGL enzymes did not increase the degree of aggregation compared to the control sample. These findings suggest that the association of pectin chains within the DASP fraction may rely significantly on intermolecular interactions. Two mechanisms are proposed, which involve side chains as short-range attachment points or an extended linear homogalacturonan conformation favoring inter-chain interactions over self-association.

Structural and Rheological Characterization of Vegetable Crispbread Enriched with Legume Purée

Crispbread is gaining popularity as a healthy snack or bread substitute. This is a lightweight dry type of flat food that stays fresh for a very long time due to its lack of water and usually contains different types of grain flour, including gluten-containing wheat or rye flour. The incorporation of legume purée into crispbread represents an innovative approach to enhancing the nutritional profile and taste of the product. The rheological properties of various legume purées (chickpea, white bean, black bean, and red bean) mixed with citrus pectin were examined, revealing significant differences in fluid behavior and viscosity. Crispbread formulations were analyzed for water content and activity, color, structure, FT-IR spectra, water vapor adsorption isotherms, and sensory evaluation. The results showed the possibility of obtaining crispbread based on the purée of legumes and citrus pectin. Crispbread enriched with red bean purée exhibited low water activity (0.156) and water content (3.16%), along with a continuous porous structure, and received the highest sensory evaluation score among the products. These findings can be treated as a basis for the development of other innovative recipes and combinations using legumes.

Pectin Hydrogels: Gel-Forming Behaviors, Mechanisms, and Food Applications

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications.

The digestive behavior of pectin in human gastrointestinal tract: a review on fermentation characteristics and degradation mechanism

Pectin is widely spread in nature and it develops an extremely complex structure in terms of monosaccharide composition, glycosidic linkage types, and non-glycosidic substituents. As a non-digestible polysaccharide, pectin exhibits resistance to human digestive enzymes, however, it is easily utilized by gut microbiota in the large intestine. Currently, pectin has been exploited as a novel functional component with numerous physiological benefits, and it shows a promising prospect in promoting human health. In this review, we introduce the regulatory effects of pectin on intestinal inflammation and metabolic syndromes. Subsequently, the digestive behavior of pectin in the upper gastrointestinal tract is summarized, and then it will be focused on pectin's fermentation characteristics in the large intestine. The fermentation selectivity of pectin by gut bacteria and the effects of pectin structure on intestinal microecology were discussed to highlight the interaction between pectin and bacterial community. Meanwhile, we also offer information on how gut bacteria orchestrate enzymes to degrade pectin. All of these findings provide insights into pectin digestion and advance the application of pectin in human health.

A critical review of RG-I pectin: sources, extraction methods, structure, and applications

In recent years, RG-I pectin isolated by low-temperature alkaline extraction methods has attracted the attention of a large number of researchers due to its huge health benefits. However, studies on other applications of RG-I pectin are still lacking. In this study, we summarized the sources (e.g. potato pulp, sugar beet pulp, okra, apple pomace, citrus peel, pumpkin, grapefruit, ginseng, etc.), extraction methods, fine structure and applications of RG-I pectin in physiological activities (e.g. anti-cancer, anti-inflammatory, anti-obesity, anti-oxidation, immune regulation, prebiotics, etc.), emulsions, gels, etc. These neutral sugar side chains not only endow RG-I pectin with various physiological activities but the entanglement and cross-linking of these side chains also endow RG-I pectin with excellent emulsifying and gelling properties. We believe that this review can not only provide a comprehensive reading for new workers interested in RG-I pectin, but also provide a valuable reference for future research directions of RG-I pectin.

Contrasting Cd accumulation of Arabidopsis halleri populations: a role for (1→4)-β-galactan in pectin

Cadmium (Cd) accumulation is highly variable among Arabidopsis halleri populations. To identify cell wall (CW) components that contribute to the contrasting Cd accumulation between PL22-H (Cd-hyperaccumulator) and I16-E (Cd-excluder), Cd absorption capacity of CW polysaccharides, CW mono- and poly- saccharides contents and CW glycan profiles were compared between these two populations. PL22-H pectin contained 3-fold higher Cd concentration than I16-E pectin in roots, and (1→4)-β-galactan pectic epitope showed the biggest difference between PL22-H and I16-E. CW-related differentially expressed genes (DEGs) between PL22-H and I16-E were identified and corresponding A. thaliana mutants were phenotyped for Cd tolerance and accumulation. A higher Cd translocation was observed in GALACTAN SYNTHASE1 A. thaliana knockout and overexpressor mutants, which both showed a lengthening of the RG-I sidechains after Cd treatment, contrary to the wild-type. Overall, our results support an indirect role for (1→4)-β-galactan in Cd translocation, possibly by a joint effect of regulating the length of RG-I sidechains, the pectin structure and interactions between polysaccharides in the CW. The characterization of other CW-related DEGs between I16-E and PL22-H selected allowed to identify a possible role in Zn translocation for BIIDXI and LEUNIG-HOMOLOG genes, which are both involved in pectin modification.

The Preparation and Potential Bioactivities of Modified Pectins: A Review

Pectins are complex polysaccharides that are widely found in plant cells and have a variety of bioactivities. However, the high molecular weights (Mw) and complex structures of natural pectins mean that they are difficult for organisms to absorb and utilize, limiting their beneficial effects. The modification of pectins is considered to be an effective method for improving the structural characteristics and promoting the bioactivities of pectins, and even adding new bioactivities to natural pectins. This article reviews the modification methods, including chemical, physical, and enzymatic methods, for natural pectins from the perspective of their basic information, influencing factors, and product identification. Furthermore, the changes caused by modifications to the bioactivities of pectins are elucidated, including their anti-coagulant, anti-oxidant, anti-tumor, immunomodulatory, anti-inflammatory, hypoglycemic, and anti-bacterial activities and the ability to regulate the intestinal environment. Finally, suggestions and perspectives regarding the development of pectin modification are provided.

Physicochemical and functional properties of Lycium ruthenicum pectin by different extraction methods

Three different extraction methods were used to extract high-temperature water-extracted pectin (HWp), high-temperature acid-extracted pectin (HAp), and high-temperature alkali-extracted pectin (HALp) from Lycium ruthenicum. The physicochemical properties, structure, and functional properties of three different pectins were studied. The results showed that HWp and HALp can extract rhamnogalacturonan-I (RG-I) from L. ruthenicum better. Through structural feature analysis, HWp and HALp have a branched structure, and HWp has a higher degree of esterification than HAp and HALp. Zeta potential results show that HWp solution is more stable. The thermal analysis results show that the thermal stability is HALp > HAp > HWp. HWp has the highest viscosity. The inhibitory activity results showed that HWp, HAp, and HALp have a certain inhibitory effect on α-glucosidase activity. This study shows the effects of different extraction methods on the properties of L. ruthenicum pectin and aims to provide a theoretical basis for the pharmaceutical and food industries to choose more suitable pectin extraction methods.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Characterization of Pectin from Grape Pomace: A Comparison of Conventional and Pulsed Ultrasound-Assisted Extraction Techniques

The yield, physicochemical and rheological parameters of grape pomace pectin (Fetească Neagră and Rară Neagră) obtained by conventional extraction (CE) were compared to those acquired by pulsed ultrasound-assisted extraction (PUAE). Extraction temperature (70–90 °C), pH (1–3) and time (1–3 h) were considered as independent variables for CE, while amplitude (20–100%), pH (1–3) and time (20–60 min) for PUAE. The optimal conditions for maximum yield and physicochemical parameters of pectin samples extracted by CE were temperature of 90 °C, pH 1.9 for 164 min (9.96% yield, 79.91 g/100 g of galacturonic acid (GalA) content, 81.28% of degree of esterification (DE) and 5.52 × 10⁴ g/mol of molecular weight (M_w) for Fetească Neagră (FN) pectin; 11.08% yield, 80.05 g/100 g of GalA content, 80.86% of DE and 5.59 × 10⁴ g/mol of M_w for Rară Neagră (RN) pectin), while for PUAE they were amplitude of 100%, pH 1.8 for 60 min (8.83% yield, 80.24 g/100 g of GalA content, 81.07% of DE and 4.19 × 10⁴ g/mol of M_w for FN pectin; 8.94% yield, 78.64 g/100 g of GalA content, 80.04% of DE and 4.23 × 10⁴ g/mol of M_w for RN pectin). The yield and physicochemical parameters of CE pectin were higher than PUAE pectin. The FT-IR spectra of pectin samples revealed the occurrence of polysaccharide compound, while rheology characteristics confirming its application in different food products.

Microwave-assisted extraction of pectin from grape pomace

The utilization of microwave technique for the pectin extraction from grape pomace (Fetească Neagră and Rară Neagră), its influence on yield, galacturonic acid content, degree of esterification and molecular weight of pectin were analyzed. The optimal conditions of the extraction process were microwave power of 560 W, pH of 1.8 for 120 s. The pectin samples extracted by MAE in optimal conditions were analyzed by comparing with commercial apple and citrus pectin based on FT-IR analysis, thermal behavior, rheological characteristics and microstructure. The FT-IR analysis established the presence of different functional groups which are attributed to the finger print region of extracted pectin, while the rheological behavior presented a good viscoelasticity of pectin solutions. The obtained data assumes that grape pomace has a great potential to be a valuable source of pectin which can be extracted by simple and quick techniques, while maintaining analogous quality to conventional sources of pectin.

Conformational Properties of Flaxseed Rhamnogalacturonan-I and Correlation between Primary Structure and Conformation

The pectic polysaccharides extracted from flaxseed (Linum usitatissiumum L.) mucilage and kernel were characterized as rhamnogalacturonan-I (RG-I). In this study, the conformational characteristics of RG-I fractions from flaxseed mucilage and kernel were investigated, using a Brookhaven multi-angle light scattering instrument (batch mode) and a high-performance size exclusion chromatography (HPSEC) system coupled with Viscotek tetra-detectors (flow mode). The M_w of flaxseed mucilage RG-I (FM-R) was 285 kDa, and the structure-sensitive parameter (ρ) value of FM-R was calculated as 1.3, suggesting that the FM-R molecule had a star-like conformation. The M_w of flaxseed kernel RG-I (FK-R) was 550 kDa, and the structure-sensitive parameter (ρ) values ranged from 0.90 to 1.21, suggesting a sphere to star-like conformation with relatively higher segment density. The correlation between the primary structure and conformation of RG-I was further discussed to better understand the structure–function relationship, which helps the scale-up applications of pectins in food, pharmaceutical, or cosmetic industries.

Pectin gels based on H+/(NH4)2SO4 and its potential in sustained release of NH4. Int J Biol Macromol 2022;208:486-493. [PMID: 35304200 DOI: 10.1016/j.ijbiomac.2022.03.062] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

A gelling strategy for HP was proposed in this study, ammonium sulfate (AS) as a co-solute could induce the gelling of HP in acidic environment. The solubility and Zeta potential of HP dramatically decreased in AS solution, which indicated AS could promote the aggregation of HP. The rheological results confirmed the gelling of HP (G' > G″) with AS: 25-30 wt% and pH ≤ 3.0, and the gel strength is mainly depended on HP rather than AS concentration. Smaller AS crystals (SEM) and reduced T₂ values (LF-NMR) were observed in HP gels, suggested the gel network of HP could limit the migration of AS and water. Finally, it was found that the release process of NH₄⁺ in HP + AS gel was lagged behind that of pure AS, which verified the potential of HP + AS gel in the field of sustained-release fertilizers.

Structure and functionality of Rhamnogalacturonan I in the cell wall and in solution: A review

Rhamnogalacturonan I (RG-I) belongs to the pectin family and is found in many plant cell wall types at different growth stages. It plays a significant role in cell wall and plant biomechanics and shows a gelling ability in solution. However, it has a significantly more complicated structure than smooth homogalacturonan (HG) and its variability due to plant source and physiological state contributes to the fact that RG-I's structure and function is still not so well known. Since functionality is a product of structure, we present a comprehensive review concerning the chemical structure and conformation of RG-I, its functions in plants and properties in solutions.

Sequential natural deep eutectic solvent pretreatments of apple pomace: A novel way to promote water extraction of pectin and to tailor its main structural domains

To establish a "green" biorefinery extraction of apple pomace pectin, a sequential pretreatment with three natural deep eutectic solvents (NADES, choline chloride (CC): glycerol (G); CC: lactic acid (LA); potassium carbonate (K): G) was used prior to hot water extraction. A synergistic effect of CC:G and CC:LA pretreatments was observed and led to the highest recovery of pectin. The sequential NADES/water extraction process also provided a mean to tailor pectin main structure. It was explained as resulting from ion exchange and individual NADES components effects. The ¹³C solid state NMR T_1ρ^H and T_HH parameters indicated a reorganization of cellulose in the residues following extraction of pectin, notably after alkaline K:G pretreatment/water extraction. Hence, sequential NADES pretreatments/water extraction represents a "green" alternative to mild mineral acid to extract pectin and to tailor its main structures, while the residual pomace can be further sources of valuable compounds and polymers.

Study on the Relationship between Emulsion Properties and Interfacial Rheology of Sugar Beet Pectin Modified by Different Enzymes

The contribution of rheological properties and viscoelasticity of the interfacial adsorbed layer to the emulsification mechanism of enzymatic modified sugar beet pectin (SBP) was studied. The component content of each enzymatic modified pectin was lower than that of untreated SBP. Protein and ferulic acid decreased from 5.52% and 1.08% to 0.54% and 0.13%, respectively, resulting in a decrease in thermal stability, apparent viscosity, and molecular weight (Mw). The dynamic interfacial rheological properties showed that the interfacial pressure and modulus (E) decreased significantly with the decrease of functional groups (especially proteins), which also led to the bimodal distribution of particle size. These results indicated that the superior emulsification property of SBP is mainly determined by proteins, followed by ferulic acid, and the existence of other functional groups also promotes the emulsification property of SBP.

Influence of Different Prebiotics on Viability of Lactobacillus casei, Lactobacillus plantarum and Lactobacillus rhamnosus Encapsulated in Alginate Microcapsules

As the production and maintenance of a sufficient number of microencapsulated probiotics is still a test for the food industry, the present study addressed the testing of three prebiotics: chicory inulin, soluble potato starch, oligofructose and a control carbon source, namely glucose, as a component part of the encapsulation matrix. Using the extrusion encapsulation technique, it was possible to obtain microcapsules whose matrix composition and dimensions correspond to the requirements of the food industry. The microcapsules obtained showed significantly different physicochemical properties, with different survival rates during processing, storage and in simulated gastrointestinal conditions. The encapsulation efficiency was very high in relation to the dimensions of the microcapsules and the technique used (between 87.00–88.19%). The microcapsules obtained offered a very good viability (between 8.30 ± 0.00–9.00 ± 0, 02 log10 cfu/g) during the 30 days of storage at 2–8 degrees and also in the simulated gastrointestinal conditions (between 7.98–8.22 log10 cfu/g). After 30 days, the lowest viability was registered in the microcapsules with glucose 6.78 ± 0.15 log10 cfu/g. It was found that after 4 h of action of gastrointestinal juices on the microcapsules stored for 30 days, cell viability falls within the limits recommended by the Food and Agriculture Organization of the United Nations (FAO) (10⁶–10⁷ CFU/mL or g of food. This study demonstrated that using prebiotic encapsulation matrix increases cell viability and protection and that the extrusion encapsulation method can be used in the production of probiotic microcapsules for the food industry.

Physicochemical and macromolecule properties of RG-I enriched pectin from citrus wastes by manosonication extraction

The properties of pectin extracted from mandarin citrus peels by manosonication extraction (MSp) were systematically studied and compared with pectin obtained by the conventional maceration method (CMp). The yield of MSp (25.5%) was significantly higher than that of CMp (18.3%), while MSp exhibited two Mw fraction distributions. Monosaccharide analysis demonstrated that MSp had more branched RG-I regions (78.3 mol%) than CMp (36.6 mol%) with a high content of arabinose and galactose. The branched-chain morphological characteristics of samples were directly imaged by atomic force microscopy. MSp exhibited a significantly lower degree of methoxylation than CMp by FT-IR and NMR analysis, but X-ray diffraction analysis showed little difference in the level of crystallinity. Moreover, MSp and CMp showed non-Newtonian behaviour, and the increasing order of apparent viscosities was 1.0 w/v% MSp < 1.0 w/v% CMp < 2.0 w/v% CMp < 2.0 w/v% MSp. Thermal analysis and weight loss measurements indicated MSp exhibited greater thermal stability. The results also indicated that both MSp and CMp significantly enhanced the emulsion activity at high concentrations; the emulsions containing 1.5 w/v% pectin showed no phase separation over 21 days, suggesting that MSp could be a potential effective stabiliser in the food and beverage industry.

Synergistic gelling mechanism of RG-I rich citrus pectic polysaccharide at different esterification degree in calcium-induced gelation

RG-I rich pectic polysaccharide is common in fruit and vegetable and possesses health benefits. However, it is removed during commercial pectin production because of poor gelling properties. Synergistic gelation can improve rheological properties of RG-I pectic polysaccharide and expand its application in functional food hydrocolloids. In the study, RG-I rich pectic polysaccharides at different degree of esterification was extracted from citrus membrane by sequential mild acidic (0.4% HCl, 28 °C) and alkaline (0.6% NaOH, 32 °C) treatment. The pectic polysaccharide from acid water (PA) composes of 41% RG-I and 44% HG with DM of 45%, while the pectic polysaccharide from basic water (PB) composed of 63% RG-I and 19% HG with DM of 15%. PA/PB blend gel under CaCO₃-glucono-δ-lactone system showed improved rheological properties compared with pure gels. Ca-bridges connected pectin aggregates and promoted the three-dimensional structure of PA/PB blend gels, while neutral sugar side-chains prompted hydrogen bonds and strengthened gel network.

Optimization of extraction with salicylic acid, rheological behavior and antiproliferative activity of pectin from Citrus sinensis peels

A Box-Behnken design was used to optimize extraction temperature, extraction time and concentration of the salicylic acid to obtain a maximum polysaccharide yield from Citrus sinensis peels. The optimal settings were: extraction time 3 h, extraction temperature 80 °C and concentration of the salicylic acid 1.5%. Under these conditions, the experimental yield and uronic acid content were 11.74% and 66.9% respectively. Preliminary characterization was performed via FT-IR, SEC/MALS/VD/DRI and GC-MS after hydrolysis. SEC analysis showed that the extracted polysaccharide had a weight average molar mass of 350 kDa and an intrinsic viscosity of 640 mL/g. The GC-MS results revealed that the extracted polysaccharide was composed of arabinose 56.7%, galactose 17.8%, xylose 13.8%, rhamnose 5.1%, mannose 2.5% and glucose 1.5% suggested a rhamnogalacturonan pectin type I with a degree of esterification of 50.9% (IRTF). The flow curve and the dynamic frequency sweep were obtained at 10, 20, 30 and 40 g/L in water and at 30 g/L in presence of CaCl₂ or NaCl at 1 mol/L. The solutions showed shear-thinning behavior fitted with Ostwald-De Waele model, except 10 g/L with a Newtonian behavior. The apparent viscosity and, the G' and G" moduli increase with PACO concentration in agreement with a slow-down of the dynamic chain. In the presence of CaCl₂ or NaCl the reduction of electrostatic repulsions between pectin chains decreases the rheological parameters. The effect is less sensitive with CaCl₂ due to intermolecular interactions. The antiproliferative activity of the extracted pectin on human Caco-2 and Hep-2 cells was very interesting with an IC₅₀ 1.4 and 1.8 μg/mL respectively.

Okra polysaccharides/gelatin complex coacervate as pH-responsive and intestine-targeting delivery protects isoquercitin bioactivity

Okra polysaccharides (OPs) belong to RG I pectin branched with neutral saccharide side chains, which possesses distinctive structure and physicochemical properties from the commonly used HG pectin. Until now, the application of RG I pectin as wall material of microcapsule remains unclear. Here, we obtained OPs/gelatin complex coacervate at the maximum yield of 86.8% (pH 3.5, gelatin/OPs ratio 9:1 and 2% (w/v) total polymer concentration) by response surface methodology. Isoquercitin (IQ)-loaded OPs/gelatin complex coacervate (OGIQ) showed porous spongy-like surface structure with average particle size, encapsulation efficiency and surface porosity at 334 nm, 81.6% and 31.9%, respectively. OGIQ was found to be pH-responsive and intestine-targeting. The IQ-release rate of OGIQ was assayed to be 89.4% in intestine fluid and below 2% in acidic and simulated gastric digestion, respectively. Accordingly, embedding in OGIQ protected IQ in digestion and improved its postdigestive α-glucosidase inhibitory rate by 88.7%. The differential scanning calorimetry curves showed that OGIQ effectively prevented IQ from thermal decomposition. The XRD, FT-IR and CD spectra indicated that IQ was embedded in OGIQ in amorphous state by hydrogen bonds and electrostatic interaction. Compared with HG, the neutral saccharide side chains of OPs could induce different secondary conformation change of gelatin during complex coacervation.

The Effect of Calcium on the Cohesive Strength and Flexural Properties of Low-Methoxyl Pectin Biopolymers

Abstract: Pectin binds the mesothelial glycocalyx of visceral organs, suggesting its potential role as a mesothelial sealant. To assess the mechanical properties of pectin films, we compared pectin films with a less than 50% degree of methyl esterification (low-methoxyl pectin, LMP) to films with greater than 50% methyl esterification (high-methoxyl pectin, HMP). LMP and HMP polymers were prepared by step-wise dissolution and high-shear mixing. Both LMP and HMP films demonstrated a comparable clear appearance. Fracture mechanics demonstrated that the LMP films had a lower burst strength than HMP films at a variety of calcium concentrations and hydration states. The water content also influenced the extensibility of the LMP films with increased extensibility (probe distance) with an increasing water content. Similar to the burst strength, the extensibility of the LMP films was less than that of HMP films. Flexural properties, demonstrated with the 3-point bend test, showed that the force required to displace the LMP films increased with an increased calcium concentration (p < 0.01). Toughness, here reflecting deformability (ductility), was variable, but increased with an increased calcium concentration. Similarly, titrations of calcium concentrations demonstrated LMP films with a decreased cohesive strength and increased stiffness. We conclude that LMP films, particularly with the addition of calcium up to 10 mM concentrations, demonstrate lower strength and toughness than comparable HMP films. These physical properties suggest that HMP has superior physical properties to LMP for selected biomedical applications.

Rethinking the impact of RG-I mainly from fruits and vegetables on dietary health

Rhamnogalacturonan I (RG-I) pectin is composed of backbone of repeating disaccharide units →2)-α-L-Rhap-(1→4)-α-D-GalpA-(1→ and neutral sugar side-chains mainly consisting of arabinose and galactose having variable types of linkages. However, since traditional pectin extraction methods damages the RG-I structure, the characteristics and health effects of RG-I remains unclear. Recently, many studies have focused on RG-I, which is often more active than the homogalacturonan (HG) portion of pectic polysaccharides. In food products, RG-I is common to fruits and vegetables and possesses many health benefits. This timely and comprehensive review describes the many different facets of RG-I, including its dietary sources, history, metabolism and potential functionalities, all of which have been compiled to establish a platform for taking full advantage of the functional value of RG-I pectin.