Spontaneous co-assembly of lactoferrin and β-lactoglobulin as a promising biocarrier for vitamin B9

Lactoferrin thermal stabilization and iron(II) fortification through ternary complex fabrication with succinylated sodium caseinate

A thermally stable co-delivery system for lactoferrin (LF) and iron(II) was developed to address iron deficiency anemia. Complexes were formed between LF, succinylated sodium caseinate (S.NaCas) and FeSO4 with high yield (∼85%). LF-S.NaCas-Fe complexes achieved loading capacities for iron(II) between 2.5 and 12 mg g-1and LF loading capacities between 250 and 690 mg g-1, depending upon initial Fe2+ concentrations and LF ratios. The LF-S.NaCas complex mixtures appeared as smooth cubic particles in SEM, and gradually aggregated to amorphous particles as th iron(II) concentration increased due to iron-facilitated cross-linking. The complexation significantly improved LF thermal stability and addressed the poor solubility of iron(II) under neutral pH. After thermal treatment (95 °C, 5 min), the rehydrated complexes retained 68%-90% LF, with <10% iron(II) release. Circular dichroism spectra showed the secondary structure of the complexed LF was well retained during thermal treatment. This thermally stable system showed great potential in LF thermal protection and iron(II) fortification.

Innovative Vancomycin-Loaded Hydrogel-Based Systems - New Opportunities for the Antibiotic Therapy

Purpose

Surgical site infections pose a significant challenge for medical services. Systemic antibiotics may be insufficient in preventing bacterial biofilm development. With the local administration of antibiotics, it is easier to minimize possible complications, achieve drugs' higher concentration at the injured site, as well as provide their more sustained release. Therefore, the main objective of the proposed herein studies was the fabrication and characterization of innovative hydrogel-based composites for local vancomycin (VAN) therapy.

Methods

Presented systems are composed of ionically gelled chitosan particles loaded with vancomycin, embedded into biomimetic collagen/chitosan/hyaluronic acid-based hydrogels crosslinked with genipin and freeze-dried to serve in a flake/disc-like form. VAN-loaded carriers were characterized for their size, stability, and encapsulation efficiency (EE) using dynamic light scattering technique, zeta potential measurements, and UV-Vis spectroscopy, respectively. The synthesized composites were tested in terms of their physicochemical and biological features.

Results

Spherical structures with sizes of about 200 nm and encapsulation efficiencies reaching values of approximately 60% were obtained. It was found that the resulting particles exhibit stability over time. The antibacterial activity of the developed materials against Staphylococcus aureus was established. Moreover, in vitro cell culture study revealed that the surfaces of all prepared systems are biocompatible as they supported the proliferation and adhesion of the model MG-63 cells. In addition, we have demonstrated significantly prolonged VAN release while minimizing the initial burst effect for the composites compared to bare nanoparticles and verified their desired physicochemical features during swellability, and degradation experiments.

Conclusion

It is expected that the developed herein system will enable direct delivery of the antibiotic at an exposed to infections surgical site, providing drugs sustained release and thus will reduce the risk of systemic toxicity. This strategy would both inhibit biofilm formation and accelerate the healing process.

Enhancement in Biological Availability of Vitamins by Nano-engineering and its Applications: An Update

Vitamin nano-engineering has been accomplished by synthesizing various nanostructures to improve their stability, bioavailability, shelf life, and functioning. This review provides a detailed description of recent advances in the art of encapsulation with high efficiency through the use of practical and logistic nano-engineering techniques such as nanofibres, nanogels, nanobeads, nanotubes, nanoparticles, nanoliposomes, and many other nanostructures. To demonstrate the interaction of molecules with nano-forms, the bioavailability of several vitamins such as B, C, E, A, D, and others in the form of nanostructures is explored. This review will provide a thorough understanding of how to improve bioavailability and nanostructure selection to extend the utility, shelf life, and structural stability of vitamins. While nanoencapsulation can improve vitamin stability and distribution, the materials employed in nanotechnologies may offer concerns if they are not sufficiently tested for safety. If nanoparticles are not adequately designed and evaluated, they may cause inflammation, oxidative stress, or other unwanted effects. Researchers and makers of nanomaterials and medication delivery systems should adhere to established rules and regulations. Furthermore, long-term studies are required to monitor any negative consequences that may result from the use of nanostructure.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Heteroprotein complex between soy protein isolate and lysozyme: Protein conformation, lysozyme activity, and structural characterization

Heteroprotein complexes are formed by electrostatic interactions of oppositely charged proteins in a purely aqueous environment. Understanding the relationship between their structural and functional properties will contribute to their tailor-made applications. Therefore, this study investigated the protein conformation, assembling structure, and enzyme activity of soy protein isolate/lysozyme (SPI/LYS) complexes at mass ratios of 2:1 (soluble complex) and 1:1.3 (stoichiometric ratio). Electrostatic complexation increased the surface hydrophobicity of complexes. Their surface hydrophobicity decreased with increasing NaCl concentrations and reached the theoretical values at the critical salt concentration of 200 mM NaCl. Electrostatic complexation did not decrease the LYS activity (∼43,000 units/mg). SPI/LYS complexes exhibited flocculated structures in which the two proteins were unevenly distributed; these were typical amorphous complexes. High dilution disassembled these complexes over 5 μm into particles of ∼100 nm, and NaCl reduced the size of these particles. Immobilized water was detected in the complexes formed by particle flocculation.

Biological and thermodynamic stabilization of lipid-based delivery systems through natural biopolymers; controlled release and molecular dynamics simulations

Nowadays, the use of lipid-based nanocarriers for the targeted and controlled delivery of a variety of hydrophobic and hydrophilic bioactive-compounds and drugs has increased significantly. However, challenges such as thermodynamic instability, oxidation, and degradation of lipid membranes, as well as the unintended release of loaded compounds, have limited the use of these systems in the food and pharmaceutical industries. Therefore, the present study reviews the latest achievements in evaluating the characteristics, production methods, challenges, functional, and biological stabilization strategies of lipid-based carriers (including changes in formulation composition, structural modification, membrane-rigidity, and finally monolayer or multilayer coating with biopolymers) in different conditions, as well as molecular dynamics simulations. The scientists' findings indicate the effect of natural biopolymers (such as chitosan, calcium alginate, pectin, dextran, xanthan, caseins, gelatin, whey-proteins, zein, and etc.) in modifying the external structure of lipid-based carriers, improving thermodynamic stability and resistance of membranes to physicochemical and mechanical tensions. However, depending on the type of bioactive compound as well as the design and production goals of the delivery-system, selecting the appropriate biopolymer has a significant impact on the stability of vesicles and maintaining the bioaccessibility of the loaded-compounds due to the stresses caused by the storage-conditions, formulation, processing and gastrointestinal tract.

Ionic Strength Dependence of the Complex Coacervation between Lactoferrin and β-Lactoglobulin

Heteroprotein complex coacervation is an assembly formed by oppositely charged proteins in aqueous solution that leads to liquid-liquid phase separation. The ability of lactoferrin and β-lactoglobulin to form complex coacervates at pH 5.5 under optimal protein stoichiometry has been studied in a previous work. The goal of the current study is to determine the influence of ionic strength on the complex coacervation between these two proteins using direct mixing and desalting protocols. The initial interaction between lactoferrin and β-lactoglobulin and subsequent coacervation process were highly sensitive to the ionic strength. No microscopic phase separation was observed beyond a salt concentration of 20 mM. The coacervate yield decreased drastically with increasing added NaCl from 0 to 60 mM. The charge-screening effect induced by increasing the ionic strength is attributed to a decrease of interaction between the two oppositely charged proteins throughout a decrease in Debye length. Interestingly, as shown by isothermal titration calorimetry, a small concentration of NaCl around 2.5 mM promoted the binding energy between the two proteins. These results shed new light on the electrostatically driven mechanism governing the complex coacervation in heteroprotein systems.

Encapsulation of Folic Acid and α-Tocopherol in Lysozyme Particles and Their Bioaccessibility in the Presence of DNA

Protein particles have been reported as the potential carriers for the co-encapsulation of bioactive components. In this study, lysozyme, a basic protein, was used to simultaneously encapsulate folic acid and α-tocopherol at pH 4.0. The encapsulation efficiency and loading capacity of folic acid or α-tocopherol increased with its respective concentration. Folic acid had no influence on the encapsulation of α-tocopherol. However, the encapsulation of folic acid was improved by α-tocopherol below 40 μg/mL but reduced by α-tocopherol at higher concentrations. The encapsulation by lysozyme shielded folic acid, α-tocopherol, or both partially from the attack of 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical cation. No masking effect of lysozyme encapsulation on α-tocopherol was found in DPPH antioxidant activity assay. Furthermore, the DNA coating was used to improve the dispersion of lysozyme with folic acid and α-tocopherol. The lysozyme/DNA particles with folic acid and α-tocopherol showed a homogenous size distribution of 180-220 nm with ζ-potential values between -33 and -36 mV. The release and bioaccessibility of folic acid in lysozyme/DNA with α-tocopherol were similar to that of folic acid alone, while the release of α-tocopherol was delayed and its bioaccessibility was improved by encapsulation in lysozyme/DNA with folic acid. The data gathered here would provide guidance for the use of lysozyme-based co-encapsulating carriers in the development of functional foods.

Nanofortification of vitamin B-complex in food matrix: Need, regulations, and prospects

•

Overview of nanomaterials to fortify food with vitamin B-complex.

•

Nanofortification of food with vitamin B-complex to overcome conventional fortification challenges.

•

Regulatory aspects, prospects, and upcoming trends of this indispensable technology are also discussed.

Micronutrient malnutrition (or hidden hunger) caused by vitamin B-complex deficiency is a significant concern in the growing population. Vitamin B-complex plays an essential role in many body functions. With the introduction of nanotechnology in the food industry, new and innovative techniques have started to develop, which holds a promising future to end malnutrition and help achieve United Nations Sustainable Developmental Goal-2 (UN SDG-2), named as zero hunger. This review highlights the need for nanofortification of vitamin B-complex in food matrix to address challenges faced by conventional fortification methods (bioavailability, controlled release, physicochemical stability, and shelf life). Further, different nanomaterials like organic, inorganic, carbon, and composites along with their applications, are discussed in detail. Among various nanomaterials, organic nanomaterials (lipid, polysaccharides, proteins, and biopolymers) were found best for fortifying vitamin B-complex in foods. Additionally, different regulatory aspects across the globe and prospects of this upcoming field are also highlighted in this review.

Formation of lysozyme-caseinate heteroprotein complexes for encapsulation of lysozyme by spray-drying: Effect of mass ratio and temperature

The formation of heteroprotein complexes obtained by the interactions between sodium caseinate (CAS) and lysozyme (LYS) at pH 7 was investigated by using turbidimetric analysis, particle size distribution, and zeta potential at different CAS/LYS ratios. Moreover, isothermal titration calorimetry (ITC) was used to determine the type and magnitude of the energies involved in the CAS/LYS complexation process and evaluated the thermodynamic behavior of their complexation. Results revealed that the structure of CAS/LYS complexes drastically changed when CAS/LYS ratio increased to 1.0 and the structuring stages were characterized by exothermic signals and were controlled by favorable enthalpy changes due to electrostatic interactions between both proteins. In addition, the interaction between two proteins was temperature-dependent and mainly entropy-driven, which was verified by molecular dynamics (MD) simulations, and the hydrophobic interactions and hydrogen bonding were shown to play an important role in CAS/LYS interactions. Furthermore, CAS/LYS complexes showed minimum LYS enzymatic activity at CAS/LYS ratio 1.0. Though spray-drying of CAS/LYS complexes with ratio 1.0, the LYS activity in reconstituted solution was recovered >80 % of initial activity after calcium chloride addition. The present study provides useful information about CAS/LYS complexation and binding processes, which could facilitate their application in antimicrobial edible food packaging.

The non-covalent interactions between whey protein and various food functional ingredients

In daily diet, Whey protein (WP) is often coexisted with various Food functional ingredients (FFI) such as proteins, polyphenols, polysaccharides and vitamins, which inevitably affect or interact with each other. Generally speaking, they may be interact by two different mechanisms: non-covalent and covalent interactions, of which the former is more common. We reviewed the non-covalent interactions between WP and various FFI, explained the effect of each WP-FFI interaction, and provided possible applications of WP-FFI complex in the food industry. The biological activity, physical and chemical stability of FFI, and the structure and functionalities of WP were enhanced through the non-covalent interactions. The development of non-covalent interactions between WP and FFI provides opportunities for the design of new ingredients and biopolymer complex, which can be applied in different fields. Future research will further focus on the influence of external or environmental factors in the food system and processing methods on interactions.

Development of Encapsulation Strategies and Composite Edible Films to Maintain Lactoferrin Bioactivity: A Review

Lactoferrin (LF) is a whey protein with various and valuable biological activities. For this reason, LF has been used as a supplement in formula milk and functional products. However, it must be considered that the properties of LF can be affected by technological treatments and gastrointestinal conditions. In this article, we have revised the literature published on the research done during the last decades on the development of various technologies, such as encapsulation or composite materials, to protect LF and avoid its degradation. Multiple compounds can be used to conduct this protective function, such as proteins, including those from milk, or polysaccharides, like alginate or chitosan. Furthermore, LF can be used as a component in complexes, nanoparticles, hydrogels and emulsions, to encapsulate, protect and deliver other bioactive compounds, such as essential oils or probiotics. Additionally, LF can be part of systems to deliver drugs or to apply certain therapies to target cells expressing LF receptors. These systems also allow improving the detection of gliomas and have also been used for treating some pathologies, such as different types of tumours. Finally, the application of LF in edible and active films can be effective against some contaminants and limit the increase of the natural microbiota present in meat, for example, becoming one of the most interesting research topics in food technology.

Utilization of diverse protein sources for the development of protein-based nanostructures as bioactive carrier systems: A review of recent research findings (2010-2021)

Consumer awareness of the relationship between health and nutrition has caused a substantial increase in the demand for nutraceuticals and functional foods containing bioactive compounds (BACs) with potential health benefits. However, the direct incorporation of many BACs into commercial food and beverage products is challenging because of their poor matrix compatibility, chemical instability, low bioavailability, or adverse impact on food quality. Advanced encapsulation technologies are therefore being employed to overcome these problems. In this article, we focus on the utilization of plant and animal derived proteins to fabricate micro and nano-particles that can be used for the oral delivery of BACs such as omega-3 oils, vitamins and nutraceuticals. This review comprehensively discusses different methods being implemented for fabrications of protein-based delivery vehicles, types of proteins used, and their compatibility for the purpose. Finally, some of the challenges and limitations of different protein matrices for encapsulation of BACs are deliberated upon. Various approaches have been developed for the fabrication of protein-based microparticles and nanoparticles, including injection-gelation, controlled denaturation, and antisolvent precipitation methods. These methods can be used to construct particle-based delivery systems with different compositions, sizes, surface hydrophobicity, and electrical characteristics, thereby enabling them to be used in a wide range of applications.

Research progress on polysaccharide/protein hydrogels: Preparation method, functional property and application as delivery systems for bioactive ingredients

Some bioactive ingredients in foods are unstable and easily degraded during processing, storage, transportation and digestion. To enhance the stability and bioavailability, some food hydrogels have been developed to encapsulate these unstable compounds. In this paper, the preparation methods, formation mechanisms, physicochemical and functional properties of some protein hydrogels, polysaccharide hydrogels and protein-polysaccharide composite hydrogels were comprehensively summarized. Since the hydrogels have the ability to control the release and enhance the bioavailability of bioactive ingredients, the encapsulation and release mechanisms of polyphenols, flavonoids, carotenoids, vitamins and probiotics by hydrogels were further discussed. This review will provide a comprehensive reference for the deep application of polysaccharide/protein hydrogels in food industry.

Nanoencapsulation of Promising Bioactive Compounds to Improve Their Absorption, Stability, Functionality and the Appearance of the Final Food Products

The design of functional foods has grown recently as an answer to rising consumers' concerns and demands for natural, nutritional and healthy food products. Nanoencapsulation is a technique based on enclosing a bioactive compound (BAC) in liquid, solid or gaseous states within a matrix or inert material for preserving the coated substance (food or flavor molecules/ingredients). Nanoencapsulation can improve stability of BACs, improving the regulation of their release at physiologically active sites. Regarding materials for food and nutraceutical applications, the most used are carbohydrate-, protein- or lipid-based alternatives such as chitosan, peptide-chitosan and β-lactoglobulin nanoparticles (NPs) or emulsion biopolymer complexes. On the other hand, the main BACs used in foods for health promoting, including antioxidants, antimicrobials, vitamins, probiotics and prebiotics and others (minerals, enzymes and flavoring compounds). Nanotechnology can also play notable role in the development of programmable food, an original futuristic concept promising the consumers to obtain high quality food of desired nutritive and sensory characteristics.

Legume proteins are smart carriers to encapsulate hydrophilic and hydrophobic bioactive compounds and probiotic bacteria: A review

Encapsulation is a promising technological process enabling the protection of bioactive compounds against harsh storage, processing, and gastrointestinal tract (GIT) conditions. Legume proteins (LPs) are unique carriers that can efficiently encapsulate these unstable and highly reactive ingredients. Stable LPs-based microcapsules loaded with active ingredients can thus develop to be embedded into processed functional foods. The recent advances in micro- and nanoencapsulation process of an extensive span of bioactive health-promoting probiotics and chemical compounds such as marine and plant fatty acid-rich oils, carotenoid pigments, vitamins, flavors, essential oils, phenolic and anthocyanin-rich extracts, iron, and phytase by LPs as single wall materials were highlighted. A technical summary of the use of single LP-based carriers in designing innovative delivery systems for natural bioactive molecules and probiotics was made. The encapsulation mechanisms, encapsulation efficiency, physicochemical and thermal stability, as well as the release and absorption behavior of bioactives were comprehensively discussed. Protein isolates and concentrates of soy and pea were the most common LPs to encapsulate nutraceuticals and probiotics. The microencapsulation of probiotics using LPs improved bacteria survivability, storage stability, and tolerance in the in vitro GIT conditions. Moreover, homogenization and high-pressure pretreatments as well as enzymatic cross-linking of LPs significantly modify their structure and functionality to better encapsulate the bioactive core materials. LPs can be attractive delivery devices for the controlled release and increased bioaccessibility of the main food-grade bioactives.

Fucoxanthin activities motivate its nano/micro-encapsulation for food or nutraceutical application: a review

Fucoxanthin is a xanthophyll carotenoid abundant in marine brown algae. The potential therapeutic effects of fucoxanthin on tumor intervention have been well documented, which have aroused great interests in utilizing fucoxanthin in functional foods and nutraceuticals. However, the utilization of fucoxanthin as a nutraceutical in food and nutrient supplements is currently limited due to its low water solubility, poor stability, and limited bioaccessibility. Nano/micro-encapsulation is a technology that can overcome these challenges. A systematic review on the recent progresses in nano/micro-delivery systems to encapsulate fucoxanthin in foods or nutraceuticals is warranted. This article starts with a brief introduction of fucoxanthin and the challenges of oral delivery of fucoxanthin. Nano/micro-encapsulation technology is then covered, including materials and strategies for constructing the delivery system. Finally, future prospective has been discussed on properly designed oral delivery systems of fucoxanthin for managing cancer. Natural edible materials such as whey protein, casein, zein, gelatin, and starch have been successfully utilized to fabricate lipid-based, gel-based, or emulsion-based delivery systems, molecular nanocomplexes, and biopolymer nanoparticles with the aid of advanced processing techniques, such as freeze-drying, high pressure homogenization, sonication, anti-solvent precipitation, coacervation, ion crosslinking, ionic gelation, emulsification, and enzymatic conjugation. These formulated nano/micro-capsules have proven to be effective in stabilizing and enhancing the bioaccessibility of fucoxanthin. This review will inspire a surge of multidisciplinary research in a broader community of foods and motivate material scientists and researchers to focus on nano/micro-encapsulated fucoxanthin in order to facilitate the commercialization of orally-deliverable tumor intervention products.

Towards Green Nanoscience: From extraction to nanoformulation

The use of nanotechnology has revolutionized many biotechnological sectors, from bioengineering to medicine, passing through food and cosmetic fields. However, their clinic and industrial application has been into the spotlight due to their safety risk and related side effects. As a result, Green Nanoscience/Nanotechnology emerged as a strategy to prevent any associated nanotoxicity, via implementation of sustainable processes across the whole lifecycle of nanoformulation. Notwithstanding its success across inorganic nanoparticles, the green concept for organic nanoparticle elaboration is still at its infancy. This, coupled with the organic nanoparticles being the most commonly used in biomedicine, highlights the need to implement specific green principles for their elaboration. In this review, we will discuss the possible green routes for the proper design of organic nanoparticles under the umbrella of Green Nanoscience: from the extraction of nanomaterials and active compounds to their final nanoformulation.

Heteroprotein complex coacervation: Focus on experimental strategies to investigate structure formation as a function of intrinsic and external physicochemical parameters for food applications

Proteins are important components of foods, because they are one of the essential food groups, they have many functional properties that are very useful for modifying the physicochemical and textural properties of processed foods and possess many biological activities that are beneficial to human health. The process of heteroprotein complex coacervation (HPCC) combines two or more proteins through long-range coulombic interaction and specific short-range forces, creating a liquid-liquid colloid, with highly concentrated protein in the droplet phase and much more diluted-protein in the bulk phase. Coacervates possess novel, modifiable, physicochemical characteristics, and often exhibit the combined biological activities of the protein components, which makes them applicable to formulated foods and encapsulation carriers. This review discusses research progress in the field of HPCC in three parts: (1) the basic and innovative experimental methods and simulation tools for understanding the physicochemical behavior of these heteroprotein supramolecular architectures; (2) the influence of environmental factors (pH, mixing ratio, salts, temperature, and formation time) and intrinsic factors (protein modifications, metal-binding, charge anisotropy, and polypeptide designs) on HPCC; (3) the potential applications of HPCC materials, such as encapsulation of nutraceuticals, nanogels, emulsion stabilization, and protein separation. The wide diversity of possible combinations of proteins with different properties, endows HPCC materials with great potential for development into highly-innovation functional food ingredients.

Protein Encapsulation Using Complex Coacervates: What Nature Has to Teach Us

Protein encapsulation is a growing area of interest, particularly in the fields of food science and medicine. The sequestration of protein cargoes is achieved using a variety of methods, each with benefits and drawbacks. One of the most significant challenges associated with protein encapsulation is achieving high loading while maintaining protein viability. This difficulty is exacerbated because many encapsulant systems require the use of organic solvents. By contrast, nature has optimized strategies to compartmentalize and protect proteins inside the cell-a purely aqueous environment. Although the mechanisms whereby aspects of the cytosol is able to stabilize proteins are unknown, the crowded nature of many newly discovered, liquid phase separated "membraneless organelles" that achieve protein compartmentalization suggests that the material environment surrounding the protein may be critical in determining stability. Here, encapsulation strategies based on liquid-liquid phase separation, and complex coacervation in particular, which has many of the key features of the cytoplasm as a material, are reviewed. The literature on protein encapsulation via coacervation is also reviewed and the parameters relevant to creating protein-containing coacervate formulations are discussed. Additionally, potential opportunities associated with the creation of tailored materials to better facilitate protein encapsulation and stabilization are highlighted.

Thermal protection and pH-gated release of folic acid in microparticles and nanoparticles for food fortification

Dispersed folic acid was successfully encapsulated in alginate–pectin hydrogels, proliposomes, and combinations thereof, providing an efficient pH-responsive delivery system.

Use of molecular interactions and mesoscopic scale transitions to modulate protein-polysaccharide structures

Mixed protein-polysaccharide structures have found widespread applications in various fields, such as in foods, pharmaceuticals or personal care products. A better understanding and a more precise control over the molecular interactions between the two types of macromolecules leading to an engineering of nanoscale and colloidal building blocks have fueled the design of novel structures with improved functional properties. However, these building blocks often do not constitute the final matrix. Rather, further process operations are used to transform the initially formed structural entities into bulk matrices. Systematic knowledge on the relation between molecular structure design and subsequent mesoscopic scale transitions induced by processing is scarce. This article aims at establishing a connection between these two approaches. Therefore, it reviews not only studies on the underlying molecular interaction phenomena leading to either a segregative or associative phase behavior and nanoscale or colloidal structures, but also looks at the less systematically studied approach of using macroscopic processing operations such as shearing, heating, crosslinking, and concentrating/drying to transform the initially generated structures into bulk matrices. Thereby, a more comprehensive look is taken at the relationship between different influencing factors, namely solvent conditions (i.e. pH, ionic strength), biopolymer characteristics (i.e. type, charge density, mixing ratio, biopolymer concentration), and processing parameters (i.e. temperature, mechanical stresses, pressure) to generate bulk protein-polysaccharide matrices with different morphological features. The need for a combinatorial approach is then demonstrated by reviewing in detail current mixed protein-polysaccharide applications that increasingly make use of this. In the process, open scientific questions that will need to be addressed in the future are highlighted.

Construction of Fucoxanthin Vector Based on Binding of Whey Protein Isolate and Its Subsequent Complex Coacervation with Lysozyme

In this study, a novel vector for fucoxanthin (FX) was constructed using the ligand-binding property of whey protein isolate and its subsequent heteroprotein complex coacervation with lysozyme. The results showed that FX could quench the intrinsic fluorescence of the whey protein isolate by a static mechanism, indicating that they could spontaneously form a nanocomplex through non-covalent interactions. Moreover, the structural and electrostatic properties of the resulting whey protein were different from those before the binding of FX, and this could be well explained by molecular dynamics simulation. The size and ζ-potential tests showed that when the whey protein isolate was combined with FX and then coacervated with lysozyme, the heteroprotein ratio and pH, which affect the coacervation process, also changed compared to those of the free whey protein isolate. FT-IR spectroscopy results showed that FX was successfully encapsulated into complex coacervates. In addition, the heteroprotein system exhibited a higher loading efficiency and also provided a better protection for FX in heating, storage, and simulated gastrointestinal environments.

Soft-Matter Approaches for Controlling Food Protein Interactions and Assembly

Animal- and plant-based proteins are present in a wide variety of raw and processed foods. They play an important role in determining the final structure of food matrices. Food proteins are diverse in terms of their biological origin, molecular structure, and supramolecular assembly. This diversity has led to segmented experimental studies that typically focus on one or two proteins but hinder a more general understanding of food protein structuring as a whole. In this review, we propose a unified view of how soft-matter physics can be used to control food protein assembly. We discuss physical models from polymer and colloidal science that best describe and predict the phase behavior of proteins. We explore the occurrence of phase transitions along two axes: increasing protein concentration and increasing molecular attraction. This review provides new perspectives on the link between the interactions, phase transitions, and assembly of proteins that can help in designing new food products and innovative food processing operations.

A systematic review on nanoencapsulation of food bioactive ingredients and nutraceuticals by various nanocarriers

Today, there is an ever-growing interest on natural food ingredients both by consumers and producers in the food industry. In fact, people are looking for those products in the market which are free from artificial and synthetic additives and can promote their health. These food bioactive ingredients should be formulated in such a way that protects them against harsh process and environmental conditions and safely could be delivered to the target organs and cells. Nanoencapsulation is a perfect strategy for this situation and there have been many studies in recent years for nanoencapsulation of food components and nutraceuticals by different technologies. In this review paper, our main goal is firstly to have an overview of nanoencapsulation techniques applicable to food ingredients in a systematic classification, i.e., lipid-based nanocarriers, nature-inspired nanocarriers, special-equipment-based nanocarriers, biopolymer nanocarriers, and other miscellaneous nanocarriers. Then, application of these cutting-edge nanocarriers for different nutraceuticals including phenolic compounds and antioxidants, natural food colorants, antimicrobial agents and essential oils, vitamins, minerals, flavors, fish oils and essential fatty acids will be discussed along with presenting some examples in each field.

Heteroprotein complex coacervates of ovalbumin and lysozyme: Formation and thermodynamic characterization

The formation of heteroprotein coacervates obtained by the interaction of ovalbumin (Ova) and lysozyme (Lys) was investigated using turbidimetric analysis and the zeta potential at different protein ratios, pH values and concentrations of NaCl. The complexes were formed over a wide pH range with a 1:1 (Ova:Lys) ratio and the highest turbidity was observed at pH 7.5, which optimal biopolymer interactions occurring. The addition of NaCl disfavored formation, even at low concentrations, and suppressed it at 300mM. The complex coacervate formation occurred in the region between the isoelectric points (pI) of the proteins, predominantly by electrostatic interactions but with participation of hydrogen bonds. The structures formed had an average size of ∼2μm, which was well above the isolated proteins, and microscopic analysis revealed that the complexes had a globular structure. The interaction was exothermic and spontaneous with a favorable entropic and unfavorable entropic contribution during interaction.

Heteroprotein Complex Formation of Bovine Lactoferrin and Pea Protein Isolate: A Multiscale Structural Analysis

Associative electrostatic interactions between two oppositely charged globular proteins, lactoferrin (LF) and pea protein isolate (PPI), the latter being a mixture of vicilin, legumin, and convicilin, was studied with a specific PPI/LF molar ratio at room temperature. Structural aspects of the electrostatic complexes probed at different length scales were investigated as a function of pH by means of different complementary techniques, namely, with dynamic light scattering, small-angle X-ray scattering (SAXS), turbidity measurements, and atomic force microscopy (AFM). Irrespective of the applied techniques, the results consistently displayed that complexation between LF and PPI did occur. In an optimum narrow range of pH 5.0-5.8, a viscous liquid phase of complex coacervate was obtained upon mild centrifugation of the turbid LF-PPI mixture with a maximum Rh, turbidity and the ζ-potential being close to zero observed at pH 5.4. In particular, the SAXS data demonstrated that the coacervates were densely assembled with a roughly spherical size distribution exhibiting a maximum extension of ∼80 nm at pH 5.4. Equally, AFM image analysis showed size distributions containing most frequent cluster sizes around 40-80 nm with spherical to elliptical shapes (axis aspect ratio ≤ 2) as well as less frequent elongated to chainlike structures. The most frequently observed compact complexes, we identify as mainly leading to LF-PPI coacervation, whereas for the less frequent chain-like aggregates, we hypothesize that additionally PPI-PPI facilitated complexes exist.

Heteroprotein complex coacervation: A generic process

Proteins exhibit a rich diversity of functional, physico-chemical and biodegradable properties which makes them appealing for various applications in the food and non-food sectors. Such properties are attributed to their ability to interact and assemble into a diversity of supramolecular structures. The present review addresses the updated research progress in the recent field of complex coacervation made from mixtures of oppositely charged proteins (i.e. heteroprotein systems). First, we describe briefly the main proteins used for heteroprotein coacervation. Then, through some selected examples, we illustrate the particularity and specificity of each heteroprotein system and the requirements that drive optimal assembly into coacervates. Finally, possible and promising applications of heteroprotein coacervates are mentioned.