Correlation between bulk characteristics of aggregated β-lactoglobulin and its surface and foaming properties

Foaming and Physicochemical Properties of Commercial Protein Ingredients Used for Infant Formula Formulation

Protein, as one of the main ingredients for infant formula, may be closely related to the undesirable foam formed during the reconstitution of infant formula. Demineralized whey powder (D70 and D90), whey protein concentrate (WPC), and skimmed milk powder (SMP) are the four protein ingredients commonly used in infant formula formulation. The foaming and physicochemical properties of these four protein ingredients from different manufacturers were analyzed in the present study. Significant differences (p < 0.05) in foaming properties were found between the samples from different manufacturers. SMP showed a highest foaming capacity (FC) and foam stability (FS), followed by D70, D90, and WPC. Although the protein composition was similar based on reducing SDS-PAGE, the aggregates varied based on non-reducing SDS-PAGE, probably resulting in the different foaming properties. Particle size, zeta potential, and solubility of the protein ingredients were assessed. The protein structure was evaluated by circular dichroism, surface hydrophobicity, and free sulfhydryl. Pearson’s correlation analysis demonstrated that FC and FS were positively correlated with random coil (0.55 and 0.74), β-turn (0.53 and 0.73), and zeta potential (0.55 and 0.51) but negatively correlated with β-strand (−0.56 and −0.71), free sulfhydryl (−0.56 and −0.63), particle size (−0.45 and −0.53), and fat content (−0.50 and −0.49). The results of this study could provide a theoretical guidance for reducing formation of foam of infant formula products during reconstitution.

Spread Layers of Lysozyme Microgel at Liquid Surface

The spread layers of lysozyme (LYS) microgel particles were studied by surface dilational rheology, infrared reflection–absorption spectra, Brewster angle microscopy, atomic force microscopy, and scanning electron microscopy. It is shown that the properties of LYS microgel layers differ significantly from those of ß-lactoglobulin (BLG) microgel layers. In the latter case, the spread protein layer is mainly a monolayer, and the interactions between particles lead to the increase in the dynamic surface elasticity by up to 140 mN/m. In contrast, the dynamic elasticity of the LYS microgel layer does not exceed the values for pure protein layers. The compression isotherms also do not exhibit specific features of the layer collapse that are characteristic for the layers of BLG aggregates. LYS aggregates form trough three-dimensional clusters directly during the spreading process, and protein spherulites do not spread further along the interface. As a result, the liquid surface contains large, almost empty regions and some patches of high local concentration of the microgel particles.

The Effects of Phosphorylation and Microwave Treatment on the Functional Characteristics of Freeze-Dried Egg White Powder

The effects of phosphorylation pre-treatments at 1.5, 2.5, and 3.5% levels, as well as microwave application at 200, 400, and 700 watts levels for 2 min, on the functional parameters of egg white powder obtained by the freeze dryer procedure were investigated. P1.5-M200 had the highest oil-holding capacity, emulsion stability, and emulsion activity, while P2.5-M200 had the highest foam capacity. The P2.5-M400 had the largest particle size, and P3.5-M200 had the highest degree of phosphorylation and protein solubility. On the other hand, P3.5-M200 had the highest solution viscosity by 1% (w/v), water-holding capacity, and foam stability, in the treatments that used phosphorylation and microwave treatment simultaneously. FTIR spectroscopy of the unfolding structure of egg white protein revealed changes in the protein’s secondary structure, such as the development of β-sheets and β-turns, as well as the binding of negatively charged phosphate groups on the serine, threonine, and tyrosine side chains. The phosphorylation and microwave treatments reduced the particle size of the egg white protein powder while increasing the surface area of the protein molecules, according to SEM analyses.

Adsorption, Surface Viscoelasticity, and Foaming Properties of Silk Fibroin at the Air/Water Interface

Like other proteins, the natural silk fibroin (SF) extracted from domesticated silkworms can adsorb at the air/water interface and stabilize foam due to its amphiphilic character and surface activity. At the interface, the adsorbed SF molecules experience structural reorganization and form water-insoluble viscoelastic films, which protect foam bubbles from coalescence and rupture. The solution conditions, such as protein concentration, pH, and additives, have significant influences on the molecular adsorption, layer thickness, interfacial mechanical strength, and, thus, on the foaming properties of SF. The understanding of the relationship between the interfacial adsorption, surface viscoelasticity, and foaming properties of SF is very important for the design, preparation, and application of SF foams in different fields.

Pickering foams and parameters influencing their characteristics

Pickering foams are available in many applications and have been continually gaining interest in the last two decades. Pickering foams are multifaceted, and their characteristics are highly dependent on many factors, such as particle size, charge, hydrophobicity and concentration as well as the charge and concentration of surfactants and salts available in the system. A literature review of these individual studies at first might seem confusing and somewhat contradictory, particularly in multi-component systems with particles and surfactants with different charges in the presence of salts. This paper provides a comprehensive overview of particle-stabilized foams, also known as Pickering foams and froths. Underlying mechanisms of foam stabilization by particles with different morphology, surface chemistry, size and type are reviewed and clarified. This paper also outlines the role of salts and different factors such as pH, temperature and gas type on Pickering foams. Further, we highlight recent developments in Pickering foams in different applications such as food, mining, oil and gas, and wastewater treatment industries, where Pickering foams are abundant. We conclude this overview by presenting important research avenues based on the gaps identified here. The focus of this review is limited to Pickering foams of surfactants with added salts and does not include studies on polymers, proteins, or other macromolecules.

Effect of high pressure homogenization on aggregation, conformation, and interfacial properties of bighead carp myofibrillar protein

Fish myofibrillar protein is underutilized due to the formation of insoluble aggregates in low salt media. High pressure homogenization (HPH) at 20, 40, and 60 MPa for four passes was applied on bighead carp myofibrillar protein in order to modify its structure and interfacial properties. Changes in aggregation, conformation, solubility, emulsifying and foaming properties of myofibrillar protein were investigated. The aggregates of myofibrillar protein were obviously disrupted by HPH treatment. The size of myofibrillar protein aggregates became smaller and more uniform as the treating pressure increased, accompanied by notable decreases of cross-sectional height and Rq value in AFM image. Furthermore, the conformation of HPH-treated myofibrillar protein was unfolded into a flexible and open structure. α-helix and β-sheet were converted into β-turn and random coil. Surface hydrophobicity and zeta potential were strengthened, along with the exposure of sulfhydryl groups onto molecule surface. On the other hand, solubility, emulsifying activity index (EAI) and foaming capacity (FC) of HPH-treated myofibrillar protein were markedly enhanced with the increasing pressure. Especially after HPH treatment at 60 MPa, myofibrillar protein was almost dissolved in low salt media (solubility 91.86%) with 4.92 fold for EAI and 3.52 fold for FC. But there was little variation in emulsifying and foaming stabilities. These results suggested that HPH treatment has interesting potential to induce the dissociation and unfolding of myofibrillar protein in low salt media, therefore improving its interfacial properties. PRACTICAL APPLICATION: Carp myofibrillar protein was treated by high pressure homogenization (HPH). Aggregates of myofibrillar protein were disrupted into smaller size form. Conformation of myofibrillar protein was unfolded into open and loose structure. Emulsifying and foaming capacities of myofibrillar protein were improved. HPH treatment modified the structure and interfacial properties of myofibrillar protein.

Correlation between Physico-Chemical Characteristics of Particulated β-Lactoglobulin and Its Behavior at Air/Water and Oil/Water Interfaces

It is widely accepted that protein-based particles can efficiently stabilize foams and emulsions. However, it is not fully elucidated which particle properties are decisive for the stabilization of air/water and oil/water interfaces. To unravel this correlation, selected properties of nano-sized soluble β-lactoglobulin particles were changed one at a time. Therefore, particles of (1) variable size but similar zeta potential and degree of cross-linking and (2) similar size but different further properties were produced by heat treatment under a specific combination of pH value and NaCl concentration and then analyzed for their interfacial behavior as well as foaming and emulsifying properties. On the one hand, it was found that the initial phase of protein adsorption at both the air/water and the oil/water interface was mainly influenced by the zeta potential, independent of the particle size. On the other hand, foam stability as resolved from the time-dependent evolution of mean bubble area negatively correlated with disulfide cross-linking, whereas emulsion stability in terms of oil droplet flocculation showed a positive correlation with disulfide cross-linking. In addition, flocculation was more pronounced for larger particles. Concluding from this, foam and emulsion stability are not linked to the same particle properties and, thus, explanatory approaches cannot be used interchangeably.

Impact of rutin on the foaming properties of soybean protein: Formation and characterization of flavonoid-protein complexes

The aims of present study were to determine the impact of rutin complexation on the ability of soybean protein isolates (SPI) to form and stabilize foams and its mechanism. At pH 7.0, the foaming capacity and foaming stability of the rutin-SPI complexes (28.33% and 14.22%) was appreciably changed when compared with that of SPI alone (19.64% and 32.95%). The improvement in foaming properties was mainly attributed to decrease gas bubble size and increase interfacial thickness as suggested by light microscopy analysis. UV-visible spectroscopy showed that the absorption peak of the SPI was increased and red shifted after complexation with rutin. ITC confirmed that there was an interaction between rutin and SPI. This interaction was hydrophobic interaction and the binding process was entropy driven. This study shows that the foaming properties of plant-based proteins can be improved by forming complexes with flavonoids, which may be useful for foaming agents in foods.

Adsorption and foaming properties of edible egg yolk peptide nanoparticles: Effect of particle aggregation

The adsorption and foaming properties of an edible colloidal nanoparticle (EYPNs), self-assembled from the food-derived, amphiphilic egg yolk peptides, were investigated, with the aim of evaluating their potential as efficient particulate stabilizers for development of aqueous food foams. The influence of particle aggregation induced by the changes of environmental conditions (mainly the pH) on these properties of EYPN systems was determined. Our results showed that the EYPNs are a highly pH-responsive system, showing the pH-dependent particle aggregation behavior, which is found to strongly affect the interfacial adsorption and macroscopic foaming behaviors of systems. Compared to high pH (6.0–9.0), the EYPNs at low pH (2.0–5.0) showed higher surface activity with a lower equilibrated surface tension as well as a higher packing density of particles and particle aggregates at the interface, probably due to the reduced electrostatic adsorption barrier. Accordingly, the EYPNs at these low pH values exhibited significantly higher foamability and foam stability. The presence of large particle clusters and/or aggregates formed at low pH in the continuous phase may contribute to the foam stability of EYPNs. These results indicate that our edible peptide-based nanoparticle EYPNs can be used as a new class of Pickering-type foam stabilizer for the design of food foams with controlled material properties, which may have sustainable applications in foods, cosmetics, and personal care products.

•

Edible nanoparticle EYPNs are efficient particulate stabilizers for making food foams.

•

EYPNs have a pH-dependent particle aggregation behavior in aqueous solutions.

•

The particle aggregation strongly affects the adsorption and foaming properties.

•

The presence of particle aggregates contributes to the foam stability of EYPNs.

•

The particle aggregates show higher surface activity and interfacial packing density.

β-Lactoglobulin Adsorption Layers at the Water/Air Surface: 4. Impact on the Stability of Foam Films and Foams

The complexity and high sensitivity of proteins to environmental factors give rise to a multitude of variables, which affect the stabilization mechanisms in protein foams. Interfacial and foaming properties of proteins have been widely studied, but the reported unique effect of pH, which can be of great interest to applications, has been investigated to a lesser extent. In this paper, we focus on the impact of pH on the stability of black foam films and corresponding foams obtained from solutions of a model globular protein—the whey β-lactoglobulin (BLG). Foam stability was analyzed utilizing three characteristic parameters (deviation time, transition time and half-lifetime) for monitoring the foam decay, while foam film stability was measured in terms of the critical disjoining pressure of film rupture. We attempt to explain correlations between the macroscopic properties of a foam system and those of its major building blocks (foam films and interfaces), and thus, to identify structure-property relationships in foam. Good correlations were found between the stabilities of black foam films and foams, while relations to the properties of adsorption layers appeared to be intricate. That is because pH-dependent interfacial properties of proteins usually exhibit an extremum around the isoelectric point (pI), but the stability of BLG foam films increases with increasing pH (3–7), which is well reflected in the foam stability. We discuss the possible reasons behind these intriguingly different behaviors on the basis of pH-induced changes in the molecular properties of BLG, which seem to be determining the mechanism of film rupture at the critical disjoining pressure.

Interaction between soyasaponin and soy β-conglycinin or glycinin: Air-water interfacial behavior and foaming property of their mixtures

The interaction between soyasaponin and soy β-conglycinin (7S) or glycinin (11S), adsorption of their mixtures at air-water interface, and foaming properties of the mixed system were investigated in this study. Fluorescence spectroscopy results showed that there was a weak binding of soyasaponin with 7S or 11S in bulk solutions, leading to the conformational changes of protein by nonspecific hydrophobic interactions. Dynamic surface properties of soyasaponin-7S/11S mixtures indicated that the composite layers formed via their weak interactions due to the synergy of reducing surface tension and the plateau of elasticity at the interface. Most mixtures represented high foam forming ability and stability except 0.2 % soyasaponin mixture, which could be a consequence that the surface behavior was dominated by soyasaponin under this concentration, and low surface elasticity lead to a less stable interfacial film. Overall, foamability of soyasaponin-7S mixtures were better than 11S ones. All data of this work was helpful to understand air-water behaviors of soyasaponin-7S/11S mixtures. This mixed system has shown good potential for further foam related industrial applications.

Adsorption layer formation in dispersions of protein aggregates

The review discusses recent results on the adsorption of amyloid fibrils and protein microgels at liquid/fluid interfaces. The application of the shear and dilational surface rheology, atomic force microscopy and passive particle probe tracking allowed for elucidating characteristic features of the protein aggregate adsorption while some proposed hypothesis still must be examined by special methods for structural characterization. Although the distinctions of the shear surface properties of dispersions of protein aggregates from the properties of native protein solutions are higher than the corresponding distinctions of the dilational surface properties, the latter ones give a possibility to obtain new information on the formation of fibril aggregates at the water/air interface. Only the adsorption of BLG microgels and fibrils was studied in some details. The kinetic dependencies of the dynamic surface tension and dilational surface elasticity for aqueous dispersions of protein globules, protein microgels and purified fibrils are similar if the system does not contain flexible macromolecules or flexible protein fragments. In the opposite case the kinetic dependencies of the dynamic surface elasticity can be non-monotonic. The solution pH influences strongly the dynamic surface properties of the dispersions of protein aggregates indicating that the adsorption kinetics is controlled by an electrostatic adsorption barrier if the pH deviates from the isoelectric point. A special section of the review considers the possibility to apply kinetic models of nanoparticle adsorption to the adsorption of protein aggregates.

Using microwave-assisted phosphorylation to improve foaming and solubility of egg white by response surface methodology

The purpose of this study was to establish optimal conditions for microwave-assisted phosphorylation modification of egg white. Response surface methodology was used to model and optimize the degree of phosphorylation, solubility, foaming ability, and foaming stability of egg white powder. The concentration of sodium tripolyphosphate, microwave power, and microwave time were selected as the main processing conditions in the phosphorylation modification of egg white protein. The following 3 conditions for optimal phosphorylation modification of egg white are the concentration of sodium tripolyphosphate of 33.84 g/L, microwave power of 419.38 W, and microwave time 90 s for maximum functional properties (solubility, foaming ability and foaming stability) and the concentration of sodium tripolyphosphate of 32.97 g/L, microwave power of 429.29 W and microwave time of 90 s for maximum foaming properties (foaming ability and foaming stability), respectively. We consequently succeeded in phosphorylation modification with microwave assistance and confirmed the various desirable properties of optimal phosphorylation modification.

Quantitative analysis of binding affinities and characterization of β-lactoglobulin and λ-carrageenan as a function of pH

λ-Carrageenan (λcar) interacted with β-lactoglobulin (βlg) immediately to form βlg-λcar complexes when used as an additive in milk. The formation of complexes is the key process through which to explore the bioapplication of λcar, which is a complicated process and influenced by many factors. In this study, the formation process and effect of pH were ascertained by the binding affinity, hydrodynamic diameter, and secondary structure. Results showed that the interaction was spontaneously exothermic and the complexes were soluble. The binding affinities (Ka) decreased from 9.0 ± 1.3 × 10⁵ to 1.3 ± 0.8 × 10⁵  M^-1 , and the stoichiometry also decreased as the pH was increased from 4 to 7. Furthermore, DLS showed a larger hydrodynamic diameter of the complexes at lower pH. Moreover, the complexes induced a change in the secondary structural components of βlg at lower pH. PRACTICAL APPLICATIONS: The secondary structure of βlg was changed by the interaction of λcar, which resulted in βlg-λcar complexes under acidic conditions. The soluble βlg-λcar complexes showed a good stability against aggregation. Thus, they can enhance the textural properties and stability of acidic dairy drinks, and can be used to accurately formulate ingredients in the food ingredient industry.

The Concept of Microwave Foam Drying Under Vacuum: A Gentle Preservation Method for Sensitive Biological Material

Microwave vacuum drying as compared to conventional vacuum drying has evinced advantages regarding drying time, while comparable product characteristics were achieved when drying sensitive biological material. Due to the volumetric microwave input, a time reduction of up to 90% is possible. When drying viscous liquids, a foamed structure that remains stable during drying exhibits further advantages as the diffusion-limited third drying step is enhanced by the porous structure. As foams not only have to be thermally resistant during microwave vacuum processing, but also withstand the vacuum, a specific process for foam drying by microwaves under low pressure conditions was developed. Foam formation and stabilization was achieved by using a synergistic mixture of proteins and carbohydrates; Lactobacillus paracasei ssp. paracasei F19 (L. paracasei) served as a model sensitive substance. Investigation of surface activity and foaming properties as a function of L. paracasei concentration revealed a significant positive contribution of the bacterial cells. It was shown that L. paracasei directly adsorbed at the air-water interface. Besides, a structuring of the liquid lamellae was assumed. Moreover, drying time was reduced to at least 50% compared to microwave vacuum drying without foaming. It was further observed that the slight loss in survival was mainly due to the relatively high moisture content and high vacuum levels at the beginning of the process. However, foaming, vacuum application, and final drying, respectively, did not affect viability of the bacterial cells. Thus, by incorporation of lactic acid bacteria into foam structures, drying can be carried out in a fraction of time, and further results in high-product quality. PRACTICAL APPLICATION: The application of continuous foam drying offers an efficient and energy-saving alternative to the currently applied techniques for the processing of sensitive material. The process could be applied for the preservation of starter cultures and probiotics as well as in the pharmaceutical industry, when sensitive material such as therapeutic proteins is dried. This process is especially suitable for freezing-sensitive and thermolabile substances.

Data concerning the fractionation of individual whey proteins and casein micelles by microfiltration with ceramic gradient membranes

Data are related to the research article “Fractionation of casein micelles and immunoglobulins by microfiltration in diafiltration mode Study of the transmission and yield of IgG, IgA and IgM” [1]. The data show the transmission and yield of the individual whey proteins α-Lactalbumin (α-La), β -Lactoglobulin (β -Lg), blood serum albumin (BSA), lactoferrin (LF), lactoperoxidase (LPO) and the immunoglobulins IgG, IgA, IgM during microfiltration (0.14 μm) performed in diafiltration mode at 50 °C with different applied transmembrane pressures (0.6-3 bar). The data provide information on the decrease of the respective proteins in the microfiltration retentate and their increase in the UF retentate. The relevant analytical methods for the individual protein detection were performed by reversed phase high performance liquid chromatography and ELISA. The isoelectric point of IgG and IgM was measured with the Zetasizer Nano ZS.

Dietary glycerol monolaurate supplementation for the modification of functional properties of egg white protein

BACKGROUND

Understanding the interactions between feed additives and the functional properties of egg white protein (EWP) may offer novel insights into the effects of feed additives on laying hens and may provide an alternative for modification of the functional properties of EWP by using laying hens as bioreactors. Glycerol monolaurate (GML) is widely used in the food industry as an effective antibacterial emulsifier. In this work, the effects of three doses of dietary GML supplementation (150, 300, and 450 mg kg^-1 hen) on the functional properties of EWP were investigated.

RESULTS

The hardness of EWP gels was significantly improved by 300 and 450 mg kg^-1 GML supplementation. Foaming capacity (FC) and foaming stability (FS) were increased after GML treatment; 450 mg kg^-1 GML supplementation showed the most significant improvements, with 44.82% in FC and 23.39% in FS. Stabilization of EWP-oil emulsions was also improved, supported by a slowed creaming process and the formation of smaller oil droplets. The heat denaturation temperature and rheological properties were also modified by dietary GML supplementation, implying improved thermal stability.

CONCLUSION

Our study demonstrated that GML supplementation has the potential to modify the functional properties of EWP, broadening the application of GML and providing a new perspective for evaluation of the efficacy of feed additives. © 2019 Society of Chemical Industry.

Emulsifying properties of water-soluble proteins extracted from the microalgae Chlorella sorokiniana and Phaeodactylum tricornutum

This study investigated the formation and stability of emulsions with lyophilized water-soluble protein extracts from two different microalgae species. Lyophilized soluble protein extracts from Chlorella sorokiniana and Phaeodactylum tricornutum with a protein content of 39.2 and 37.2 wt%, respectively, were used. Drop-shape analysis showed them to have considerable interfacial activity at the oil-water interface. The application in emulsions, prepared by high-pressure homogenization (1000 bar, 3 passes, 5.0 wt% oil) further revealed that a concentration of 1.0 wt% soluble protein from Chlorella sorokiniana was sufficient to manufacture an emulsion with a monomodal droplet size distribution and a small volume based mean particle diameter (d43 = 232 ± 22 nm). Emulsions remained stable throughout 7 days of storage (d43,7d = 265 ± 4 nm). In contrast, 3.7 wt% of the respective proteins from Phaeodactylum tricornutum were needed to obtain a stable emulsion (d43 = 334 ± 12 nm and d43,7d = 325 ± 8 nm). Emulsions prepared with both algae fractions showed unusually high salt stabilities up to 500 mM of sodium chloride, with no appreciable changes in volume based mean particle diameter, appearance, or microstructure. Furthermore, model emulsions with soluble lyophilized proteins from Chlorella sorokiniana had a very high stability toward changes in pH (pH ≥ 5), whereas soluble proteins of Phaeodactylum tricornutum showed only a moderate pH stability with the smallest volume based particle size at pH 7.

Ultrasound-induced changes in structural and physicochemical properties of β-lactoglobulin

Effect of ultrasound treatment on the physicochemical properties and structure of β-lactoglobulin were investigated. β-Lactoglobulin was treated with ultrasound at different amplitudes, temperatures, and durations. The surface hydrophobicity and free sulfhydryl group of β-lactoglobulin were significantly increased after ultrasound treatment (p < .05). The maximal surface hydrophobicity and free sulfhydryl group were 5,812.08 and 5.97 μmol/g, respectively. Ultrasound treatment changed the physicochemical properties of β-lactoglobulin including particle size (from 1.21 ± 0.05 nm to 1.66 ± 0.03 nm), absolute zeta potential (from 15.47 ± 1.60 mV to 27.63 ± 3.30 mV), and solubility (from 84.66% to 95.17%). Ultrasound treatment increased α-helix and β-sheet structures of β-lactoglobulin. Intrinsic fluorescence intensity of ultrasound-treated β-lactoglobulin was increased with shift of λ_max from 334 to 329 nm. UV absorption of β-lactoglobulin was decreased with shift of λ_max from 288 to 285 nm after ultrasound treatment. There were no significant changes in high-performance liquid chromatography and protein electrophoretic patterns. These findings indicated that ultrasound treatment had high potential in modifying the physiochemical and structural properties of β-lactoglobulin for industrial applications.

Ultrasound-induced changes in structural and physicochemical properties of β-lactoglobulin

Effect of ultrasound treatment on the physicochemical properties and structure of β-lactoglobulin were investigated. β-Lactoglobulin was treated with ultrasound at different amplitudes, temperatures, and durations. The surface hydrophobicity and free sulfhydryl group of β-lactoglobulin were significantly increased after ultrasound treatment (p < .05). The maximal surface hydrophobicity and free sulfhydryl group were 5,812.08 and 5.97 μmol/g, respectively. Ultrasound treatment changed the physicochemical properties of β-lactoglobulin including particle size (from 1.21 ± 0.05 nm to 1.66 ± 0.03 nm), absolute zeta potential (from 15.47 ± 1.60 mV to 27.63 ± 3.30 mV), and solubility (from 84.66% to 95.17%). Ultrasound treatment increased α-helix and β-sheet structures of β-lactoglobulin. Intrinsic fluorescence intensity of ultrasound-treated β-lactoglobulin was increased with shift of λmax from 334 to 329 nm. UV absorption of β-lactoglobulin was decreased with shift of λmax from 288 to 285 nm after ultrasound treatment. There were no significant changes in high-performance liquid chromatography and protein electrophoretic patterns. These findings indicated that ultrasound treatment had high potential in modifying the physiochemical and structural properties of β-lactoglobulin for industrial applications.