Utilization of anionic polysaccharides to improve the stability of rice glutelin emulsions: Impact of polysaccharide type, pH, salt, and temperature

Rice proteins - Gum arabic coacervates: Effect of pH and polysaccharide concentration in oil-in-water emulsion stability

In the context of replacing animal proteins in food matrices, rice proteins (RP) become promised because they come from an abundant plant source, are hypoallergenic, and have high digestibility and nutritional value. However, commercial protein isolates obtained by spray drying have low solubility and poor functionality, especially in their isoelectric point. One way to modify these properties is through interaction with polysaccharides, such as gum arabic (GA). Therefore, this work aims to evaluate the effects of pH and GA concentration on the interaction and emulsifying activity of RP:GA coacervates. First, the effects of pH (2.5 to 7.0) and GA concentrations (0.2 to 1.0 wt%, giving rise to RP:GA mass ratios of 1:0.2 to 1:1.0) in RP:GA blends were evaluated. The results demonstrated that biopolymers present opposite net charges at pH between 2.5 and 4.0. At pH 3.0, insoluble coacervates with complete charge neutralization were formed by electrostatic interactions, while at pH 5.0 it was observed that the presence of GA prevented the RP massive aggregation. Second, selected blends with 0.4 or 1.0 wt% of GA (RP:GA mass ratios of 1:0.4 or 1:1.0) at pH 3.0 or 5.0 were tested for their ability to stabilize oil-in-water emulsions. The emulsions were characterized for 21 days. It was observed that the GA increased the stability of RP emulsions, regardless of the pH and polysaccharide concentration. Taken together, our results show that it is possible to combine RP and GA to improve the emulsifying properties of these plant proteins at pH conditions close to their isoelectric point, expanding the possibility of implementation in food systems.

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

The Emulsification and Stabilization Mechanism of an Oil-in-Water Emulsion Constructed from Tremella Polysaccharide and Citrus Pectin

The objective of this study was to investigate the feasibility of the mixture of tremella polysaccharide (TP) and citrus pectin (CP) as an emulsifier by evaluating its emulsifying ability/stability. The results showed that the TP:CP ratio of 5:5 (w/w) could effectively act as an emulsifier. CP, owing its lower molecular weight and highly methyl esterification, facilitated the emulsification of oil droplets, thereby promoting the dispersion of droplets. Meanwhile, the presence of TP enhanced the viscosity of emulsion system and increased the electrostatic interactions and steric hindrance, therefore hindering the migration of emulsion droplets, reducing emulsion droplets coalesce, and enhancing emulsion stability. The emulsification and stabilization performances were influenced by the molecular weight, esterified carboxyl groups content, and electric charge of TP and CP, and the potential mechanism involved their impact on the buoyant force of droplet size, viscosity, and steric hindrance of emulsion system. The emulsions stabilized by TP-CP exhibited robust environmental tolerance, but demonstrated sensitivity to Ca2+. Conclusively, the study demonstrated the potential application of the mixture of TP and CP as a natural polysaccharide emulsifier.

Resveratrol-loaded sulfated Hericium erinaceus β-glucan-chitosan nanoparticles: Preparation, characterization and synergistic anti-inflammatory effects

Resveratrol (RES) is a natural polyphenol with excellent biological activity. But the poor stability and bioavailability of RES severely limit its application. Thus, the resveratrol-loaded sulfated Hericium erinaceus β-glucan-chitosan nanoparticles (DS-CS-RES NPs) were prepared using electrostatic self-assembly to solve these problems in this study. The structure of DS-CS-RES NPs was spherical or sub spherical shape with small average particle size (191.07 nm), which was characterized by FT-IR, FS, XRD and TEM. DS-CS-RES NPs exhibited good stability and RES had a sustainable release from the nanoparticles in gastrointestinal digestion. Meanwhile, DS-CS-RES NPs could improve the inflammatory injury of LPS stimulated RAW264.7 macrophages by inhibiting the production of NO, IL-1β, IL-6 and TNF-α. Furthermore, DS-CS-RES NPs had strong anti-inflammatory activity by regulating protein levels of NF-κB p65, STAT1 and TLR4 through NF-κB and JAK-STAT1 signaling pathway in vitro, and sulfated H. erinaceus β-glucan-chitosan nanoparticle (DS-CS NPs) and RES had synergistic anti-inflammatory effect. Overall, DS-CS NPs can serve as a potential green and safe functional carrier for encapsulating resveratrol, which can improve its anti-inflammatory activity. This work may be conducive to the development of functional carrier for encapsulating RES and applications of hydrophobic active molecules in functional foods or medicines.

Stability, Digestion, and Cellular Transport of Soy Isoflavones Nanoparticles Stabilized by Polymerized Goat Milk Whey Protein

Soy isoflavones (SIF) are bioactive compounds with low bioavailability due to their poor water solubility. In this study, we utilized polymerized goat milk whey protein (PGWP) as a carrier to encapsulate SIF with encapsulation efficiency of 89%, particle size of 135.53 nm, and zeta potential of -35.16 mV. The PGWP-SIF nanoparticles were evaluated for their stability and in vitro digestion properties, and their ability to transport SIF was assessed using a Caco-2 cell monolayer model. The nanoparticles were resistant to aggregation when subjected to pH changes (pH 2.0 to 8.0), sodium chloride addition (0-200 mM), temperature fluctuations (4 °C, 25 °C, and 37 °C), and long-term storage (4 °C, 25 °C, and 37 °C for 30 days), which was mainly attributed to the repulsion generated by steric hindrance effects. During gastric digestion, only 5.93% of encapsulated SIF was released, highlighting the nanoparticles' resistance to enzymatic digestion in the stomach. However, a significant increase in SIF release to 56.61% was observed during intestinal digestion, indicating the efficient transport of SIF into the small intestine for absorption. Cytotoxicity assessments via the MTT assay showed no adverse effects on Caco-2 cell lines after encapsulation. The PGWP-stabilized SIF nanoparticles improved the apparent permeability coefficient (Papp) of Caco-2 cells for SIF by 11.8-fold. The results indicated that using PGWP to encapsulate SIF was an effective approach for delivering SIF, while enhancing its bioavailability and transcellular transport.

Effect of synergism of sucrose ester and xanthan gum on the stability of walnut milk

BACKGROUND

Single emulsifiers have an effect on the stability of plant protein drinks, giving some improvement. Emulsifiers are more effective in maintaining emulsion stability when combined with polysaccharides such as xanthan gum. In this paper, we studied the food-grade emulsifier sucrose ester and measured the average particle size, polydispersity value, zeta potential, microrheological properties, microstructure and creaming index related to walnut protein emulsion by constructing a walnut protein emulsion simulation system. SDS-PAGE and low-field NMR were used to analyze the relative molecular masses of emulsions and the water distribution of emulsions, respectively, to further investigate the synergistic effects of sucrose esters and xanthan gum on the ease of emulsification and intrinsic mechanisms of different molecular weight proteins of walnut protein emulsions.

RESULTS

The results indicate that the synergistic effect of sucrose esters and xanthan gum was to stabilize emulsions better than single emulsifiers. Xanthan gum and protein may form protein-polysaccharide complexes, as well as the hydrophobic interaction between sucrose ester and xanthan gum. The properties of xanthan gum can improve the stability of the emulsion by affecting the mechanical properties of walnut protein emulsion, and the combination of sucrose ester and xanthan gum can better stabilize large protein molecules.

CONCLUSION

The results not only provide a theoretical basis for the stability of plant protein emulsion systems, but also provide technical support for the production and processing of large-molecule plant proteins into emulsions in this field for improving their stability, and also provide more possibilities for other types of emulsions. © 2023 Society of Chemical Industry.

pH-responsive Pickering emulsion containing citrus essential oil stabilized by zwitterionically charged chitin nanofibers: Physicochemical properties and antimicrobial activity

In this study, zwitterionic chitin nanofibers (Z-ChNFs) were used to prepare Pickering emulsions containing citrus essential oils (CEO) and their physicochemical properties and antimicrobial activity were investigated. Results show that as-prepared Pickering emulsions exert pH-reversible properties, pH can adjust the charge of Z-ChNFs to influence the stability of the emulsion. As the concentration of Z-ChNFs increase, the droplet size of the emulsion decreases. The high concentration of Z-ChNFs (1.5 wt%) can enhance the viscosity and promote forming nano-network structures within continuous phases, and their amphiphilic nature can strengthen the capacity for adsorption on the oil/water interface, resulting in enhanced physical stability of the encapsulated CEO emulsion. Additionally, Z-ChNFs have positive effects on the improvement of antimicrobial activity of CEO. This study provides valuable implications for the development and application of essential oils as biopreservation in the food field.

Antioxidant stability and in vitro digestion of β-carotene-loaded oil-in-water emulsions stabilized by whey protein isolate-Mesona chinensis polysaccharide conjugates

The aim of this study was to investigate the delivery of functional factor β-carotene by emulsion stabilized with whey protein isolate-Mesona chinensis polysaccharide (WPI-MCP) conjugate. Results showed that the WPI-MCP complex had better antioxidant properties than WPI. Correspondingly, the emulsions stabilized by this complex also had better oxidative stability compared with protein emulsions alone. The particle size of WPI-MCP emulsion was smaller and had a better stability when MCP was added at 0.2 % (w/v). The sizes of WPI-MCP and WPI emulsions were 3594.33 and 7765.67 nm at pH 4, indicating improved emulsion stability around isoelectric point of WPI. At different NaCl concentrations, the absolute values of zeta-potential of WPI-MCP emulsions were larger than that of WPI emulsions except 0.1 % (mol/L) NaCl. The sizes of WPI and WPI-MCP emulsions were 2384.32 and 790.12 nm, respectively. During in vitro digestion, WPI-MCP stabilized emulsions slowed down the release of free fatty acids and achieved about 80 % bioaccessibility of β-carotene, indicating that WPI-MCP-stabilized emulsions encapsulating β-carotene can effectively control the release of bioactive substances. These studies have potential significance and value for the construction of food-grade emulsion delivery system.

Enhancing Immunity and Modulating Vaginal Microflora Against Candidal Vaginitis Through Nanoemulsion Supplemented with Porphyra Oligosaccharide as an Intravaginal Vaccine Adjuvant

Background

Intravaginal vaccination is an encouraging approach to prevent infectious vaginitis, with nanoemulsions showing effectiveness as mucosal adjuvants.

Purpose

This study aimed to formulate a nanoemulsion incorporating Porphyra oligosaccharide (PO@NE) and assess its effectiveness as a mucosal adjuvant in intravaginal vaccines against candidal vaginitis.

Materials and Methods

PO@NE was prepared, and the stability, immunomodulatory activity and cytotoxicity were screened in vitro. Further, the preventive effect of PO@NE as adjuvants for heat-killed Candida albicans (HK-CA) vaccines was explored in a murine model of candidal vaginitis, in comparison with those supplemented with polysaccharide (PP@NE). The mice were intravaginally vaccinated with 106 HK-CA cells, suspended in 1% NE without or with either PO or PP at a final concentration of 6.5 μg/mL, in a total volume of 20 μL. This vaccination was intravaginally administered once a week for 3 weeks. One week following the final vaccination, the mice underwent an intravaginal challenge with 107 C. albicans cells. One week after the challenge, the mice were euthanized to isolate serum, spleen, vaginal washes, and vaginal tissues for analysis.

Results

PP@NE and PO@NE, with diameters approximately around 100 nm, exhibited exceptional stability at 4°C and low cytotoxicity when used at a concentration of 1% (v/v). Intravaginal vaccination with HK-CA adjuvanted with PO@NE effectively protected against candidal vaginitis evidenced by less Candida hyphae colonization, milder mucosal damage and cell infiltration. Moreover, enhanced mucosal antibody production, induction of T helper (Th)1 and Th17-related immune responses, enlarged the population of CD8+ cells, and elevated vaginal microflora diversity were observed in vaccinated mice. Interestingly, the potency was rather attenuated when PO@NE was replaced with PP@NE.

Conclusion

These findings indicate PO@NE as a HK-CA vaccine adjuvant for candidal vaginitis prevention via enhancement of both cellular and humoral immunity and modulation of vaginal microflora, emphasizing further intravaginal vaccination development.

Lentinula edodes Sing Polysaccharide: Extraction, Characterization, Bioactivities, and Emulsifying Applications

In the present work, the optimization of extraction, emulsifying properties, and biological activities of polysaccharides from Lentinula edodes Sing (LES) were studied. The results showed LES polysaccharides extracted by hot water or ultrasonication are a group of β-glucan. Among all the samples, the one extracted by hot water showed the best emulsifying capacity. In addition, the results demonstrated that LES polysaccharide had strong scavenging activities in vitro on DPPH and ABTS radicals, which reached the highest level for the one extracted by 90 min ultrasonication (p < 0.05). Overall, Lentinula edodes Sing polysaccharides (LESPs) may have potential applications as emulsifying agents in food industries.

Pullulan-stabilized Soybean Phospholipids/Cinnamaldehyde emulsion for Flammulina velutipes preservation

Fresh mushrooms (Flammulina velutipes) are very perishable and easily brown; also they undergo postharvest loss of nutritive constituents. In this study, cinnamaldehyde (CA) emulsion was prepared by using soybean phospholipids (SP) as emulsifier and pullulan (Pul) as stabilizer. The effect of emulsion on the quality of mushroom during storage was also studied. The experimental results indicated that the emulsion obtained by adding 6 % pullulan was found to the most uniform and stable, which is beneficial to its application. Emulsion coating maintained the storage quality of Flammulina velutipes. The incorporation of CA emulsion into the coating system showed a positive effect on inhibiting the accumulation of reactive oxygen species, resulting from improving the effectiveness of delaying active free radical scavenging enzymes. The shelf life of mushrooms coated with emulsion was significantly prolonged, which indicates its potential application in food preservation.

Influence of the Emulsifier Sodium Caseinate-Xanthan Gum Complex on Emulsions: Stability and Digestive Properties

In this study, virgin coconut oil (VCO) nanoemulsions were prepared by ultrasonication using a sodium caseinate (SC) and xanthan gum (XG) complex as an emulsifier. The stability and digestion characteristics of SC/XG-VCO emulsions formed by co-adsorption and SC-VCO-XG emulsions formed by layer adsorption were compared. The stability of the two emulsions was studied under different pH, ionic strength, heat treatment, freeze-thaw cycles, and storage conditions, and the droplet size and zeta potential were used as indicators to assess the stability. In addition, the stability of oxidation and the digestive properties of both emulsions were studied. It was found that the SC-VCO-XG emulsions had better environmental stability, oxidative stability, storage stability, and digestibility compared to SC/XG-VCO emulsions. This study has shown that the formation method of protein-polysaccharide stabilized emulsions has an impact on the stability and digestibility properties of the emulsions, and that the emulsion carriers constructed by layer adsorption are more suitable for subsequent industrial production and development.

Polysaccharide-addition order regulates sonicated egg white peptide stabilized nanoemulsions and β-carotene digestion in vitro

In this paper, the effects of the polysaccharide-addition order (before and after homogenisation) on the stability of nanoemulsion stabilised by sonicated egg white peptides and the in vitro digestive behaviour of loaded β-carotene were investigated. The pyrene fluorescence results showed that the concentration of micelles formed by flaxseed gum (FG) in complex with peptides was significantly higher than that of peach gum (PG). The order of polysaccharide-addition affected the emulsion properties and stability; adding polysaccharides before homogenisation led to protein bridging flocculation, low polysaccharide coverage and a higher interfacial adsorbed protein content of the emulsion. PG enhanced potential spatial resistance and electrostatic repulsion, effectively prevented emulsion flocculation and improved electrostatic stability. After homogenisation, FG was added to emulsions to improve environmental stability, including ionic, temperature and storage stability. Due to the viscosity of polysaccharides and the formed polysaccharide-protein-lipid aggregates, the increasing degree of bridging flocculation promoted the prominent of apparent viscosity, and the G' and G'' exhibited a frequency-dependent increase. The polysaccharide type and mode changed the surface loading charge and droplet interface thickness, delayed the destruction of the droplet structure by protease, and slowed the release of β-carotene to form micelles. In this study, a stable emulsion system and an efficient emulsion transport system for bioactive substances were obtained by regulating polysaccharides adding order, which is significant for constructing an efficient food emulsion delivery system.

Comparison of structures and emulsifying properties between water-extracted pectins from Fructus aurantii

The structural characteristics of two water-extracted pectic polysaccharides from Fructus aurantii were investigated, and the impacts of their structures on the emulsifying stability were evaluated. FWP-60 (extracted by cold water and followed 60 % ethanol precipitation) and FHWP-50 (extracted by hot water and followed 50 % ethanol precipitation) were both high methyl-esterified pectins, which were composed of homogalacturonan (HG) and highly branched rhamnogalacturonan I (RG-I) regions. The weight-average molecular weight, methyl-esterification degree (DM) and HG/RG-I ratio of FWP-60 were 1200 kDa, 66.39 % and 4.45, respectively, which were 781 kDa, 79.10 % and 1.95 for FHWP-50. The methylation and NMR analysis of FWP-60 and FHWP-50 demonstrated that the main backbone consisted of different molar ratios of →4)-α-GalpA-(1 → and →4)-α-GalpA-6-O-methyl-(1→, and the side chains contained arabinan and galactan. Moreover, the emulsifying properties of FWP-60 and FHWP-50 were discussed. Compared with FHWP-50, FWP-60 had better emulsion stability. Overall, pectin had a linear HG domain and a small number of RG-I domain with short side chains to facilitate the stabilization of emulsions in Fructus aurantii. A comprehensive knowledge of the structure characteristic and emulsifying property would enable us to provide more information and theoretical guidance for the structure and emulsion preparation of Fructus aurantii pectic polysaccharides.

Tremella fuciform Polysaccharides: Extraction, Physicochemical, and Emulsion Properties at Different pHs

The chemical composition, macromolecular characteristics, and structure of four types of Tremella fuciform polysaccharides (TPS) were analyzed, including one TPS that was extracted in the laboratory (L-TPS) and three commercial TPS. The effects of pH on the properties of TPS emulsions were investigated by analyzing their zeta potential, particle size, apparent viscosity, and stability. The results showed that L-TPS presented a higher percentage content of protein (2.33%) than commercial TPS (0.73–0.87%), and a lower molecular mass (17.54 × 106 g/mol). Thus, L-TPS exhibited the best emulsifying activity but gave poor emulsion stability. The droplet sizes and apparent viscosity of commercial TPS-stabilized emulsions were larger or higher in acidic environments. At pH 2, the apparent viscosity was the lowest for L-TPS. Commercial TPS emulsions were most stable at pH 6, while the L-TPS-stabilized emulsion was most stable at pH 2. The obtained results revealed that the emulsifying properties of TPS varied and the effects of pH on emulsion characteristics differed, as determined from the molecular mass, macromolecular characteristics, and structure. This research is useful for expanding the application of TPS as a novel food ingredient in emulsions.

Enhancement of lycopene bioaccessibility in tomatoes using excipient emulsions: Effect of dark tea polysaccharides

This study fabricated a novel excipient emulsion by adding dark tea polysaccharides to improve the bioaccessibility of lycopene from tomatoes. Results indicated that addition of tea polysaccharides greatly increased the antioxidant activity of excipient emulsions. Additionally, tea polysaccharides markedly improved the physical stability of excipient emulsion when being mixed with tomato puree and passing through a simulated gastrointestinal tract, contributing to an increase in electrostatic and steric repulsion between the droplets. Besides, certain amount of tea polysaccharides (0.05 - 0.2 wt%) could increase the rate and extent of lipid digestion in tomato-emulsion mixtures. Finally, lycopene bioaccessibility was significantly increased (from 16.95 % to 26.21 %) when 0.1 wt% tea polysaccharides were included, which was mainly ascribed to the ability of tea polysaccharides to increase lipid digestion and reduce carotenoid oxidation within the gastrointestinal tract. These results suggest that well-designed excipient emulsions may increase carotenoids bioavailability in the complex food matrices.

Solubility and conformational characterization of rice glutelin after high temperature treatment

Enhancing the solubility of rice glutelin in neutral aqueous solution is the prerequisite for the development of rice protein drinks and ingredients. Herein, glutelin was first dissolved in an aqueous solution of pH 12, and then heated at 121 °C for 20 min. The results showed that the solubility of glutelin increased from 2.55 mg/mL to 20.7 mg/mL at pH 7. The size of glutelin aggregates at pH 7 decreased from 900 nm to 400 nm after high temperature treatment (HTT), which was confirmed by atomic force microscopy. The results of small angle X-ray scattering showed that HTT induced the conformational unfolding of glutelin, and the protein in the aggregate was rod like shape as well as the mean square rotation radius decreased from 64.9 to 54.8 Å. Furthermore, Raman spectrum results also agree with the unfolding of glutelin conformation, which was mainly reflected in the changes of tyrosine and tryptophan residues, as well as the decreasing of α-helix content and increasing of β-sheet content. After being freeze-dried, HTT glutelin has a re-solubilization capacity of 15.48 mg/mL in pH 7 aqueous solution, which was superior to that of spray dried glutelin powder (pH 7, 9.19 mg/mL).

Improved Stabilization and In Vitro Digestibility of Mulberry Anthocyanins by Double Emulsion with Pea Protein Isolate and Xanthan Gum

There is significant evidence that double emulsion has great potential for successfully encapsulating anthocyanins. However, few research studies are currently using a protein-polysaccharide mixture as a stable emulsifier for double emulsion. This study aimed to improve the stability and in vitro digestibility of mulberry anthocyanins (MAs) by employing a double emulsion composed of pea protein isolate (PPI) and xanthan gum (XG). The influence of various XG concentrations (0%, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%) and different temperatures (5 °C, 25 °C, 45 °C, 65 °C) on the physical stability and the thermal degradation of MAs from double emulsions were investigated. In addition, the physicochemical properties of double emulsions and the release performance of MAs during in vitro simulated digestion were evaluated. It was determined that the double emulsion possessed the most stable physical characteristics with the 1% XG addition. The PPI-1% XG double emulsion, when compared to the PPI-only double emulsion, expressed higher thermal stability with a retention rate of 83.19 ± 0.67% and a half-life of 78.07 ± 4.72 days. Furthermore, the results of in vitro simulated digestion demonstrated that the MAs in the PPI-1% XG double emulsion were well-protected at oral and gastric with ample release found in the intestine, which was dissimilar to findings for the PPI-only double emulsion. Ultimately, it was concluded that the double emulsion constructed by the protein-polysaccharide system is a quality alternative for improving stability and absorption with applicability to a variety of food and beverage systems.

Complex coacervation of soy protein isolate-limited enzymatic hydrolysates and sodium alginate: Formation mechanism and its application

The complex coacervation of soybean protein isolate and polysaccharide has been widely applied for preparing biopolymer materials like microcapsule. In this study, hydrolytic soy protein isolate (HSPI) was prepared by mild hydrolysis of soy protein isolate (SPI) with fungal protease 400 (F400). The degree of hydrolysis (DH) for the enzymatic products was controlled at 1%-5%. Emulsification, oxidation resistance, and thermal stability were used to evaluate the performances of HSPI with different DH. The results showed that the HSPI with the hydrolysis degree of 2% had the optimal property. Subsequently, the complex polymer of HSPI/SA was prepared by the coalescence reaction of HSPI and sodium alginate (SA). The turbidity curves manifested the optimal complex coacervation occurred at the ratio of 7:1 (HSPI:SA). Fourier transform infrared spectroscopy (FTIR) presented that the reaction involved electrostatic interactions between -NH3 + in HSPI and -COO- in SA. Isothermal titration calorimetry experiments indicated that the complex coacervation reactions of HSPI and SA arose spontaneously. The microencapsulation by complex coacervation of HSPI and SA was further produced for embedding sweet orange oil. The thermogravimetric analysis (TGA) result revealed that the microencapsulation system of HSPI/SA had a better heat resistance than that using the SPI/SA complex polymer.

Fabrication and Characterization of Botanical-Based Double-Layered Emulsion: Protection of DHA and Astaxanthin Based on Interface Remodeling

Both DHA and astaxanthin, with multiple conjugated double bonds, are considered as health-promoting molecules. However, their utilizations into food systems are restricted due to their poor water solubility and high oxidizability, plus their certain off-smell. In this study, the interactions between perilla protein isolate (PPI) and flaxseed gum (FG) were firstly investigated using multiple spectroscopies, suggesting that hydrophobic, electrostatic force and hydrogen bonds played important roles. Additionally, double-layer emulsion was constructed by layer-by-layer deposition technology and exhibited preferable effects on masking the fishy smell of algae oil. Calcium ions also showed an improving effect on the elasticity modulus of O/W emulsions and was managed to significantly protect the stability of co-delivered astaxanthin and DHA, without additional antioxidants during storage for 21 days. The vegan system produced in this study may, therefore, be suitable for effective delivery of both ω-3 fatty acid and carotenoids for their further incorporation into food systems, such as plant-based yoghourt, etc.

Enhancing thermal and emulsifying resilience of pomegranate fruit protein with gum Arabic conjugation

In this study, a controlled Maillard reaction was carried out to conjugate gum Arabic (GA) polymer to pomegranate protein isolate (PPI). The Maillard conjugates (MCs) were visualized by SEM and authenticity of the conjugates was assessed by NMR, FTIR, and XRD. To reveal the effect of the Maillard conjugation on the quality attributes of PPI, functional properties, thermal stability, and emulsifying behaviors of PPI and MCs were investigated. The oil binding capacity of conjugated protein (370.52%) was higher than that of protein alone (208.19%). While GA and PPI were completely degraded or decomposed at a temperature of 1000 °C, the MCs retained approximately half of the initial mass. MCs displayed higher emulsifying activity (42.71 m²/g) and emulsifying stability (90.17 (ESI30)), compared to PPI (32.61 m²/g) and (72.25 (ESI30)). Stability coefficient was significantly improved and reached from 0.64 R to 0.95 R with the usage of MCs in the emulsions. A lower centrifugal precipitation rate was determined in MCs emulsions (28.26%) compared to PPI emulsions (45.42%). Utilization of MCs instead of protein alone as a stabilizer in the oil-in-water emulsions was a logical approach for increasing their stability against environmental degradations including freeze-thaw cycle, pH, ionic, and temperature stress.

High-pressure processing influences the conformation, water distribution, and gel properties of pork myofibrillar proteins containing Artemisia sphaerocephala Krasch gum

•

Artemisia sphaerocephala Krasch gum could improve WHC and gel strength.

•

HPP (≤200 MPa) induced high immobilized water proportion and a dense, uniform microstructure of MP-AG gels.

•

HPP (>200 MPa) decreased surface hydrophobicity and storage modulus of MP-AG solutions.

•

HPP (>200 MPa) increased particle size and amount of reactive sulfhydryl group of MP-AG solutions.

•

The results have great potential for developing reduced-sodium meat products.

The effect of high-pressure processing (100–4 00 MPa) on conformation, water distribution, and gel characteristics of reduced-sodium (0.3 M NaCl) myofibrillar protein containing 0.15% Artemisia sphaerocephala Krasch gum (AG) was investigated. The addition of AG resulted in the increase of WHC, proportion of immobilized water, and gel strength. Then, the WHC, proportion of immobilized water, and gel strength peaked after 200 MPa treatment, attributed to increased solubilization and zeta potential of MP, decreased particle size of MP, exposure of intrinsic tryptophan residues and the partial transformation of α-helix into β-sheet in MP. Moreover, 300 and 400 MPa induced decreases in surface hydrophobicity, solubility and storage modulus, resulting in the formation of loose and disordered gel structures with attenuated WHC. These results suggest that application of moderate HPP (200 MPa) combined with AG could provide a novel approach to improve the WHC and gelation properties of reduced-sodium meat products.

Effect of Coconut Protein and Xanthan Gum, Soybean Polysaccharide and Gelatin Interactions in Oil-Water Interface

We report on our study of the interactions between coconut protein extracted from coconut meat and three hydrocolloids (gelatin, xanthan gum, and soybean polysaccharide) and their interfacial adsorption and emulsification properties. We used Zeta potential, fluorescence spectroscopy scanning and ITC to investigate the interactions between a fixed concentration (1%) of coconut protein and varying concentrations of hydrocolloid. Through the interfacial tension and interfacial viscoelasticity, the interfacial properties of the hydrocolloid and coconut protein composite solution were explored. The physical stability of the corresponding emulsion is predicted through microstructure and stability analysis. Xanthan gum forms a flocculent complex with coconut protein under acidic conditions. Soy polysaccharides specifically bind to coconut protein. Under acidic conditions, this complex is stabilized through the steric hindrance of soy polysaccharides. Due to gelatin-coconut protein interactions, the isoelectric point of this complex changes. The interfacial tension results show that as time increases, the interfacial tensions of the three composite solutions decrease. The increase in the concentration of xanthan gum makes the interfacial tension decrease first and then increase. The addition of soybean polysaccharides reduces the interfacial tension of coconut protein. The addition of xanthan gum forms a stronger elastic interface film. Emulsion characterization showed that the gelatin-added system showed better stability. However, the addition of xanthan gum caused stratification quickly, and the addition of soybean polysaccharides also led to instability because the addition of polysaccharides led to a decrease in thermodynamic compatibility. This research lays the foundation for future research into coconut milk production technology.

Improving method, properties and application of polysaccharide as emulsifier

At present, there are still some problems for the emulsification of polysaccharides such as lack of green, efficient and industrialized methods, lack of systematic and in-depth structure-activity relationship, and need of expanding its application scope. The physical, chemical and biological methods for improving the emulsifying of polysaccharides, the emulsifying properties and influencing factors of polysaccharides and application in food were reviewed herein. It was pointed out that the future research should focus on the effect of physical-biological synergistic function on the emulsification of polysaccharides, the effect of processing process on the structure and emulsification mechanism of polysaccharides, and further expanding the application field of polysaccharides with emulsification activity to improve the quality of products.

Etherified pullulan-polyethylenimine based nanoscaffolds improved chemosensitivity of erlotinib on hypoxic cancer cells

The current research endeavor aimed to accomplish hypoxia-responsive polyethyleneimine-conjugated carboxymethyl pullulan-based co-polymer (CMP-HA-NI-PEI-NBA) bearing nitroaromatic subunits to efficiently deliver erlotinib (ERL) to reverse its hypoxia-induced resistance in cancer cells. As compared to a control co-polymer (CMP-HA-MI-PEI-BA) devoid of hypoxia-sensitive moieties, this scaffold demonstrated a hypochromic shift in the UV spectra and rapid dismantling of its self-assembled architecture upon exposure to simulated hypoxic condition. The hypoxia-responsive co-polymer encapsulated ERL with desirable loading capacity (DEE, 63.05 ± 2.59%), causing attenuated drug crystallinity. The drug release rate of the scaffold under reducing condition was faster relative to that of non-reducing environment. Their cellular uptake occurred through an energy-dependent endocytic process, which could exploit its caveolae/lipid raft-mediated internalization pathway. The ERL-loaded scaffolds more efficiently induced apoptosis and suppressed the proliferation of drug-resistant hypoxic HeLa cells than the pristine ERL. Hence, this study presented a promising drug delivery nanoplatform to overcome hypoxia-evoked ERL resistance.

Interactions between Pea Protein Isolate and Carboxymethylcellulose in Neutral and Acid Aqueous Systems

Pea protein isolate (PPI), as an emerging plant protein, has gradually aroused the attention of the public, but the PPI, especially high-concentration PPI's low stability in the acidic aqueous system, was still a problem that limited its application. In this research, we investigated the interactions between relatively high concentrations of PPI (3.0%) and carboxymethylcellulose (CMC, 0-0.5%) in neutral and acid aqueous systems to explore the change of the phase behavior and stability of PPI as affected by CMC. It showed that the stability of PPI in the aqueous systems strongly depended on the CMC concentration, especially at the acidic aqueous systems. At neutral aqueous system, a certain amount addition of CMC into the PPI caused serious phase separation. While stable PPI solutions can be obtained at a narrow region around pH 4.5 to 5.5 by adding different amounts of CMC. The enhancement in the electrostatic repulsion and steric hindrance between the newly formed PPI-CMC biopolymers, as well as the increase in bulk viscosity with the adding of CMC at pH 4.5, contributed to the higher stability of PPI in acidic aqueous systems.

Impact of Adding Polysaccharides on the Stability of Egg Yolk/Fish Oil Emulsions under Accelerated Shelf-Life Conditions

Polysaccharides can form interfacial complexes with proteins to form emulsions with enhanced stability. We assessed the effect of adding gum guar or gum arabic to egg yolk/fish oil emulsions. The emulsions were produced using simple or high-pressure homogenization, stored for up to 10 days at 45 °C, and characterized for their particle size and distribution, viscosity, encapsulation efficiency, oxidative stability, and cytotoxicity. Emulsions containing gum guar and/or triglycerides had the highest viscosity. There was no significant difference in the encapsulation efficiency of emulsions regardless of the polysaccharide used. However, emulsions containing gum arabic displayed a bridging flocculation effect, resulting in less stability over time compared to those using gum guar. Emulsions produced using high-pressure homogenization displayed a narrower size distribution and higher stability. The formation of peroxides and propanal was lower in emulsions containing gum guar and was attributed to the surface oil. No significant toxicity toward Caco-2 cells was found from the emulsions over time. On the other hand, after 10 days of storage, nonencapsulated fish oil reduced the cell viability to about 80%. The results showed that gum guar can increase the particle stability of egg yolk/fish oil emulsions and decrease the oxidation rate of omega-3 fatty acids.

The microstructure and physiochemical stability of Pickering emulsions stabilized by chitosan particles coating with sodium alginate: Influence of the ratio between chitosan and sodium alginate

The purpose of this study was to further improve the physiochemical stability of the chitosan (CS) particle-stabilized Pickering emulsion by coating with sodium alginate (SA). The effect of different mass ratios of CS and SA (1:0.5-1:2) on the microstructure, rheology and the stability of the emulsions were comprehensively evaluated by various methods such as optical microscope, scanning electron microscope, rheometer, and low-field nuclear magnetism. The multilayer emulsion with low content of SA (CS:SA = 1:0.5) presented bridging flocculation. If SA concentration was high (CS:SA = 1:1-1:2), the surface of the Pickering emulsion droplets was completely covered by the SA. At this time, multilayer emulsion droplets became stable due to strong electrostatic and/or steric repulsion. Too high SA concentration (CS:GA = 1:2) might also promote the accumulation of moisture. In addition, the CS/SA multilayer emulsion showed higher coalescence stability under different environmental treatments but its creaming stability and flocculation stability were still sensitive to pH (2, 4 and 10), temperature (4 °C and 80 °C) and ionic strength (300-500 mM). In all, the addition of the proper level SA (CS:GA = 1:1-1:2) could increase the stability of CS particle-stabilized Pickering emulsion.

Polysaccharide conjugates from Chin brick tea (Camellia sinensis) improve the physicochemical stability and bioaccessibility of β-carotene in oil-in-water nanoemulsions

A natural antioxidant emulsifier, tea polysaccharide conjugate (TPC), was isolated from Chin brick tea. The impact of TPC on β-carotene stability and bioaccessibility in oil-in-water nanoemulsions was assessed. TPC exhibited strong antioxidant activity and could be used to fabricate stable nanoemulsions (d < 140 nm). The extent of lipid digestion was considerably lower for lipid droplets coated by TPC (68%) than Tween 80 (94%) or whey protein isolate (WPI) (89%), probably because TPC formed interfacial layers that hindered the access of lipases to lipids. The chemical stability of β-carotene in TPC-nanoemulsions was markedly higher than in those formulated with Tween 80 or WPI due to the high antioxidant activity of TPC. The bioaccessibility of β-carotene (20-30%) was independent of emulsifier type. TPC from Chin brick tea can therefore be used as a dual-purpose functional ingredient in emulsified foods.