Influence of NaCl on the oil/water interfacial and emulsifying properties of walnut protein-xanthan gum

Effect of different amphiphilic emulsifiers complexed with xanthan gum on the stability of walnut milk and structural characterization of their complexes

The kind of compounding emulsifier used and the amount of compounding have a significant impact on the emulsion's stability. In this study, the average particle size, Zeta potential, emulsification index, laser confocal microstructure, and rheological properties shows that the ratio of monoglyceride-xanthan gum and sucrose ester-xanthan gum could maintain the good stability of the emulsion in a certain range, and the monoglyceride and sucrose ester compounding could effectively improve the stability of the emulsion in a specific ratio (7:3). The results of fluorescence spectroscopy, Fourier transform infrared spectroscopy and sodium dodecyl sulfate polyacrylamide gel electrophoresis indicated that the simultaneous complexation of three substances was more likely to produce hydrophobic interactions with walnut proteins than the simultaneous complexation of two substances. Also confirmed were the hydrogen bonding connections between the proteins and the monoglyceride, sucrose ester, and xanthan gum. Monoglyceride and xanthan gum complexes were also found to stabilize more proteins.

Preparation of oil-in-water emulsions stabilized by faba bean protein-grape leaf polyphenol conjugates: pH-, salt-, heat-, and freeze-thaw-stability

BACKGROUND

Plant proteins are being increasingly utilized as functional ingredients in foods because of their potential health, sustainability, and environmental benefits. However, their functionality is often worse than the synthetic or animal-derived ingredients they are meant to replace. The functional performance of plant proteins can be improved by conjugating them with polyphenols. In this study, the formation and stability of oil-in-water emulsions prepared using faba bean protein-grape leaf polyphenol (FP-GLP) conjugates as emulsifiers. Initially, FP-GLP conjugates were formed using an ultrasound-assisted alkali treatment. Then, corn oil-in-water emulsions were prepared using high-intensity sonication (60% amplitude, 10 min) and the impacts of conjugate concentration, pH, ionic strength, freezing-thawing, and heating on their physicochemical properties and stability were determined.

RESULTS

Microscopy and light scattering analysis showed that oil-in-water emulsions containing small oil droplets could be formed at conjugate concentrations of 2% and higher. The addition of salt reduced the electrostatic repulsion between the droplets, which increased their susceptibility to aggregation. Indeed, appreciable droplet aggregation was observed at ≥ 50 mmol/L sodium chloride. The freeze-thaw stability of emulsions prepared with protein-polyphenol conjugates was better than those prepared using the proteins alone. In addition, the emulsions stabilized by the conjugates had a higher viscosity than those prepared by proteins alone.

CONCLUSION

This study showed that FP-GLP conjugates are effective plant-based emulsifiers for forming and stabilizing oil-in-water emulsions. Indeed, emulsions formed using these conjugates showed improved resistance to pH changes, heating, freezing, and salt addition. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Effect of synergism of sucrose ester and xanthan gum on the stability of walnut milk

BACKGROUND

Single emulsifiers have an effect on the stability of plant protein drinks, giving some improvement. Emulsifiers are more effective in maintaining emulsion stability when combined with polysaccharides such as xanthan gum. In this paper, we studied the food-grade emulsifier sucrose ester and measured the average particle size, polydispersity value, zeta potential, microrheological properties, microstructure and creaming index related to walnut protein emulsion by constructing a walnut protein emulsion simulation system. SDS-PAGE and low-field NMR were used to analyze the relative molecular masses of emulsions and the water distribution of emulsions, respectively, to further investigate the synergistic effects of sucrose esters and xanthan gum on the ease of emulsification and intrinsic mechanisms of different molecular weight proteins of walnut protein emulsions.

RESULTS

The results indicate that the synergistic effect of sucrose esters and xanthan gum was to stabilize emulsions better than single emulsifiers. Xanthan gum and protein may form protein-polysaccharide complexes, as well as the hydrophobic interaction between sucrose ester and xanthan gum. The properties of xanthan gum can improve the stability of the emulsion by affecting the mechanical properties of walnut protein emulsion, and the combination of sucrose ester and xanthan gum can better stabilize large protein molecules.

CONCLUSION

The results not only provide a theoretical basis for the stability of plant protein emulsion systems, but also provide technical support for the production and processing of large-molecule plant proteins into emulsions in this field for improving their stability, and also provide more possibilities for other types of emulsions. © 2023 Society of Chemical Industry.

Isolation of Protein and Fiber from Hot Pepper Seed Oil Byproduct To Enhance Rheology, Emulsion, and Oxidative Stability of Low-Fat Salad Dressing

This research aimed to explore the potential utilization of protein (P) and fiber (F) extracted from cold-pressed hot pepper seed oil byproduct (HPOB) in the enhancement of the rheological properties, emulsion stability, and oxidative stability of a low-fat salad dressing with 10% oil content. The assessment involved the examination of several aspects, including the physical qualities such as emulsion stability, rheological behavior, and particle size as well as the microstructure and oxidative stability. It is worth mentioning that all emulsions had desirable characteristics, including shear-thinning behavior characterized by a consistency index ranging from 6.82 to 22.32 Pa s, as well as viscoelasticity and recoverability. These qualities were notably improved with the addition of P and F of HBOP. During the thermal stability testing, it was observed that the low-fat dressing containing 1% P-1F exhibited minor changes in the G* value, indicating its exceptional emulsion stability. The control salad dressings in C1 samples contained 30% oil. (B): C2: samples containing 10% oil (low-fat salad dressing sample) exhibited ζ-potential values of -34.70 and -46.70 mV. The samples 1P-1F and 2P-1F exhibited the highest ζ-potential values. Furthermore, the increase in F resulted in a reduction in droplet size and elicited elevated values for the induction period (IP), with the exception of samples containing 1% protein, 3% fiber, and 10% oil (1P-3F). The salad dressings that included P-F exhibited enhanced oxidative stability, demonstrated by their longer IP (ranging from 5.11 to 7.04 h) compared to the control samples. The formulation consisting of samples contained 1% protein, 1% fiber, and 10% oil (1P-1F) and samples contained 2% protein, 1% fiber, and 10% oil (2P-1F) exhibited superior ζ-potential, emulsion stability, and recovery rate compared to other formulations. The findings of this investigation indicate that the interaction of proteins and fibers extracted from HPOB exhibits the potential to enhance the rheological characteristics, emulsion stability, and oxidative stability of low-fat salad dressing.

Development and Characterization of Pickering Emulsion Stabilized by Walnut Protein Isolate Nanoparticles

This study was conducted to prepare walnut protein isolate nanoparticles (nano-WalPI) by pH-cycling, combined with the ultrasound method, to investigate the impact of various nano-WalPI concentrations (0.5~2.5%) and oil volume fractions (20~70%) on the stability of Pickering emulsion, and to improve the comprehensive utilization of walnut residue. The nano-WalPI was uniform in size (average size of 108 nm) with good emulsification properties (emulsifying activity index and stability index of 32.79 m²/g and 1423.94 min, respectively), and it could form a stable O/W-type Pickering emulsion. When the nano-WalPI concentration was 2.0% and the oil volume fraction was 60%, the best stability of Pickering emulsions was achieved with an average size of 3.33 μm, and an elastic weak gel network structure with good thermal stability and storage stability was formed. In addition, the emulsion creaming index value of the Pickering emulsion was 4.67% after 15 days of storage. This study provides unique ideas and a practical framework for the development and application of stabilizers for food-grade Pickering emulsions.

Preparation and emulsification properties of cationic starch-xanthan gum composite nanoparticles

In this work, nanoparticles were prepared by the composite of cationic starch (CS) and xanthan gum (XG) through gelatinization and alcohol precipitation for the first time. Physicochemical properties, micromorphology, and emulsification properties of CS/XG nanoparticles were measured. SEM showed that after compositing with XG, the diameter size of the CS/XG nanoparticles was increased from about 50 nm to 150-300 nm. FT-IR, XRD and ¹³C CP/MAS NMR confirmed that XG was successfully complexed with CS. Besides, the visual observation indicated emulsions stabilized by CS/XG nanoparticles had excellent storage and thermal properties. Additionally, the rheological and stability results of emulsions show that pH and NaCl had effects on the rheological and stability properties of emulsions, which means that the prepared emulsions had environmental responsiveness. Thus, this work provides an efficient method to prepare CS and GX composite nanoparticles with efficient emulsifying properties.

Improving the Functional Performance of Date Seed Protein Concentrate by High-Intensity Ultrasonic Treatment

Date kernel is a plant-derived byproduct that has the potential to be converted into a high-value-added food ingredient, such as protein concentrate, in the food industry. Ultrasound, which is an alternative method for improving the functional properties of food proteins, is an effective physical treatment for modifying protein functionality. Solubility is the main criterion that primarily affects other functional properties of protein concentrates, such as emulsification, foaming, and water and oil binding. The aim of this study is to enhance the techno-functional performance of date seed protein concentrate (DSPC) by maximizing the solubility via a high-intensity ultrasound (HIUS) treatment at a fixed frequency of 20 kHz. The effect of ultrasonic homogenization under varying amplitudes and times (amplitude of 40, 60, and 80% for 5, 10, and 15 min, respectively) on the functional properties of the DSPC was investigated by using the response surface methodology (RSM). A face-centered central composite design (FC-CCD) revealed that the optimal process conditions of HIUS were at an amplitude of 80% for 15 min. The physicochemical and functional properties of the ultrasound-applied concentrate (DSPC-US) were determined under the optimum HIUS conditions, and then these properties of DSPC-US were compared to the native DSPC. The results showed that the solubility of all DSPC samples treated by HIUS was significantly (p < 0.05) higher than that of the native DSPC. In addition, emulsion activity/stability, foaming activity/stability, and oil-binding capacity increased after HIUS homogenization treatments, whereas the water-binding capacity decreased. These changes in the techno-functional properties of the DSPC-US were explained by the modification to the physicochemical structure of the DSPC (particle size, zeta potential, SDS-PAGE, SEM, FTIR, DSC, free SH content, surface hydrophobicity, and intrinsic emission). This work revealed that HIUS could be an effective treatment for enhancing the functional properties of date seed protein concentrate.

Interfacial Properties of Pea Protein Hydrolysate: The Effect of Ionic Strength

The effect of a tryptic hydrolysis as well as the effect of ionic strength (0–0.4 M NaCl) was investigated on the oil/water interfacial properties of soluble pea protein hydrolysate (SPPH) at neutral pH and room temperature (20 ± 0.01 °C). SEC-MALS and SDS-Page analysis showed that tryptic hydrolysis created a lower molecular weight polypeptide mixture, whereas FTIR analysis and DSC thermograms demonstrated a more disordered and flexible structure. The bulk properties of SPPH were studied in terms of hydrodynamic diameter and turbidity, where higher particle size (+ ~13 nm) and turbidity were observed at 0.4 M NaCl. Regarding the interfacial properties, the surface activity of SPPH improved by increasing ionic strength, with maximum interfacial pressure (14.28 mN/m) at 0.4 M NaCl. Nevertheless, the addition of NaCl negatively affected the elasticity and strength of the interfacial film, where the sample without salt exhibited the highest dilatational and shear storage modulus in all the frequencies considered.

Effect of humectants and Zygosaccharomyces bailii inoculation on the physical stability of oil-in-water emulsions modeling salad dressings

BACKGROUND

Salad dressing formulations include a pH within 3.2-4.1, salt and other solutes to depress water activity. The interaction between hydrocolloids and other components such as humectants determines their physical and microbiological stability. To our knowledge, the effect of commonly used solutes on physical stability and rheological characteristics of oil-in-water emulsions stabilized by xanthan gum has not been reported, and neither has the effect of a spoilage yeast on physical stability been evaluated.

RESULTS

The effect of different humectants (sodium chloride, glucose and xylitol) and Zygosaccharomyces bailii inoculation on the stability of oil-in-water emulsions containing different levels of xanthan gum to emulate different types of salad dressings was investigated by means of droplet size, zeta potential, rheological measurements and confocal laser scanning microscopy (CLSM). Generally, the addition of humectants strengthened the weak or strong emulsion structure, especially xylitol. Glucose or xylitol acted as stabilizers since they decreased Sauter and De Broucker diameter. On the contrary, NaCl destabilized the emulsions since it increased droplet size and exhibited the lowest absolute values of zeta potential. Inoculation with Z. bailii destabilized some emulsions since it increased Sauter and De Broucker diameter. Emulsion droplet size, polydispersity, and xanthan gum and yeast location were confirmed by CLSM imaging.

CONCLUSION

This study highlights the key role of humectants and xanthan gum level on physical characteristics and stability of oil-in-water emulsions. Addition of xylitol leads to an enhancement in emulsion rheology and physical stability, suggesting that it is a potential low-calorie multifunctional additive for salad dressings. © 2022 Society of Chemical Industry.

Pickering Emulsions Stabilized by Tea Water-Insoluble Protein Nanoparticles From Tea Residues: Responsiveness to Ionic Strength

Tea water-insoluble protein nanoparticles (TWIPNs) can be applied to stabilize Pickering emulsions. However, the effect of ionic strength (0–400 mmol/L) on the characteristics of Pickering emulsions stabilized by TWIPNs (TWIPNPEs) including volume-averaged particle size (d_4,3), zeta potential, microstructure and rheological properties is still unclear. Therefore, this work researched the effect of ionic strength on the characteristics of TWIPNPEs. The d_4,3 of TWIPNPEs in the aquatic phase increased with the increase in ionic strength (0–400 mmol/L), which was higher than that in the SDS phase. Furthermore, the flocculation index of TWIPNPEs significantly (P < 0.05) increased from 24.48 to 152.92% with the increase in ionic strength. This could be verified from the microstructure observation. These results indicated that ionic strength could promote the flocculation of TWIPNPEs. Besides, the absolute values of zeta potential under different ionic strengths were above 40 mV in favor of the stabilization of TWIPNPEs. The viscosity of TWIPNPEs as a pseudoplastic fluid became thin when shear rate increased from 0.1 to 100 s⁻¹. The viscoelasticity of TWIPNPEs increased with increasing ionic strength to make TWIPNPEs form a gel-like Pickering emulsion. the possible mechanism of flocculation stability of TWIPNPEs under different ionic strengths was propose. TWIPNs adsorbed to the oil-water interface would prompt flocculation between different emulsion droplets under the high ionic strength to form gel-like behavior verified by CLSM. These results on the characteristics of TWIPNPEs in a wide ionic strength range would provide the theoretical basis for applying Pickering emulsions stabilized by plant proteins in the food industry.

Effect of Coconut Protein and Xanthan Gum, Soybean Polysaccharide and Gelatin Interactions in Oil-Water Interface

We report on our study of the interactions between coconut protein extracted from coconut meat and three hydrocolloids (gelatin, xanthan gum, and soybean polysaccharide) and their interfacial adsorption and emulsification properties. We used Zeta potential, fluorescence spectroscopy scanning and ITC to investigate the interactions between a fixed concentration (1%) of coconut protein and varying concentrations of hydrocolloid. Through the interfacial tension and interfacial viscoelasticity, the interfacial properties of the hydrocolloid and coconut protein composite solution were explored. The physical stability of the corresponding emulsion is predicted through microstructure and stability analysis. Xanthan gum forms a flocculent complex with coconut protein under acidic conditions. Soy polysaccharides specifically bind to coconut protein. Under acidic conditions, this complex is stabilized through the steric hindrance of soy polysaccharides. Due to gelatin-coconut protein interactions, the isoelectric point of this complex changes. The interfacial tension results show that as time increases, the interfacial tensions of the three composite solutions decrease. The increase in the concentration of xanthan gum makes the interfacial tension decrease first and then increase. The addition of soybean polysaccharides reduces the interfacial tension of coconut protein. The addition of xanthan gum forms a stronger elastic interface film. Emulsion characterization showed that the gelatin-added system showed better stability. However, the addition of xanthan gum caused stratification quickly, and the addition of soybean polysaccharides also led to instability because the addition of polysaccharides led to a decrease in thermodynamic compatibility. This research lays the foundation for future research into coconut milk production technology.

Improving method, properties and application of polysaccharide as emulsifier

At present, there are still some problems for the emulsification of polysaccharides such as lack of green, efficient and industrialized methods, lack of systematic and in-depth structure-activity relationship, and need of expanding its application scope. The physical, chemical and biological methods for improving the emulsifying of polysaccharides, the emulsifying properties and influencing factors of polysaccharides and application in food were reviewed herein. It was pointed out that the future research should focus on the effect of physical-biological synergistic function on the emulsification of polysaccharides, the effect of processing process on the structure and emulsification mechanism of polysaccharides, and further expanding the application field of polysaccharides with emulsification activity to improve the quality of products.

Plant-Based Colloidal Delivery Systems for Bioactives

The supplementation of plant-based foods and beverages with bioactive agents may be an important strategy for increasing human healthiness. Numerous kinds of colloidal delivery systems have been developed to encapsulate bioactives with the goal of improving their water dispersibility, chemical stability, and bioavailability. In this review, we focus on colloidal delivery systems assembled entirely from plant-based ingredients, such as lipids, proteins, polysaccharides, phospholipids, and surfactants isolated from botanical sources. In particular, the utilization of these ingredients to create plant-based nanoemulsions, nanoliposomes, nanoparticles, and microgels is covered. The utilization of these delivery systems to encapsulate, protect, and release various kinds of bioactives is highlighted, including oil-soluble vitamins (like vitamin D), ω-3 oils, carotenoids (vitamin A precursors), curcuminoids, and polyphenols. The functionality of these delivery systems can be tailored to specific applications by careful selection of ingredients and processing operations, as this enables the composition, size, shape, internal structure, surface chemistry, and electrical characteristics of the colloidal particles to be controlled. The plant-based delivery systems discussed in this article may be useful for introducing active ingredients into the next generation of plant-based foods, meat, seafood, milk, and egg analogs. Nevertheless, there is still a need to systematically compare the functional performance of different delivery systems for specific applications to establish the most appropriate one. In addition, there is a need to test their efficacy at delivering bioavailable forms of bioactives using in vivo studies.

Green approach in food nanotechnology based on subcritical water: effects of thyme oil and saponin on characteristics of the prepared oil in water nanoemulsions

Thyme oil in water nanomulsion was prepared under subcritical water conditions using water and saponin, as solvent and emulsifier, respectively. Gas chromatography revealed that there were 44 bioactive components in the extracted thyme essential oil which, thymol and carvacrol were two mains of them. Experiments were designed based on central composite design and effects of amounts of saponin and thyme essential oil were evaluated on particle size, polydispersity index (PDI) and zeta potential of the prepared nanoemulsions using response surface methodology. Obtained results revealed that more desirable thyme oil nanoemulsions with minimum particle size (184.51 nm) and PDI (0.514), and maximum zeta potential (- 22.51 mV) were prepared using 0.94 g of saponin and 0.28 mL of thyme essential oil. Furthermore, results indicated that prepared nanoemulsion using obtained optimum production conditions had relatively high antioxidant activity (24%) and high antibacterial and antifungal activities against Staphylococcus aureus and Penicillium digitatum.

Properties and Stability of Perilla Seed Protein-Stabilized Oil-in-Water Emulsions: Influence of Protein Concentration, pH, NaCl Concentration and Thermal Treatment

Perilla seed protein (PSP) was extracted from defatted perilla seed meal and applied in oil-in-water (O/W) emulsions as an emulsifier. We investigated the influences of protein concentration (0.25⁻1.5 wt %), pH (3.0⁻9.0), NaCl concentration (0⁻350 mmol/L) and thermal treatment (70⁻90 °C, 30 min) on the physical characteristics of O/W emulsions, including volume-average diameter, ζ-potential, interfacial protein concentration, microstructure and so on. Results showed that increasing PSP concentration would decrease the d_4,3 and a 1.0 wt % PSP concentration was sufficient to ensure the stability of emulsion. Under pH 3.0⁻9.0, emulsions were stable except at pH 3.0⁻5.0 which was proximal to the isoelectric point (pH 4.5) of PSP. At high NaCl concentrations (250⁻350 mmol/L), the emulsions exhibited relatively lower absolute ζ-potential values and a large number of aggregated droplets. A moderate thermal treatment temperature (e.g., 70 °C) was favorable for the emulsion against aggregation and creaming. However, when 90 °C thermal treatment was performed, a clear layer separation was observed after 2 weeks storage and the emulsion showed a poor stability. The findings of this work are of great importance for the utilization and development of PSP as an emulsifier for food emulsions.

Effect of microparticulation and xanthan gum on the stability and lipid digestion of oil-in-water emulsions stabilized by whey protein

Since lipid digestion is an interfacial process, food emulsions are increasingly being seen as a mechanism for controlling lipid uptake.