Pea protein isolate–high methoxyl pectin soluble complexes for improving pea protein functionality: Effect of pH, biopolymer ratio and concentrations

High internal phase Pickering emulsions stabilized by egg yolk-carboxymethyl cellulose as an age-friendly dysphagia food: Tracking the dynamic transition from co-solubility to coacervates

Although protein-polysaccharide complexes with different phase behaviors all show potential for stabilizing high internal phase Pickering emulsions (HIPPEs), it is not clarified which aggregation state is more stable and age-friendly. In this study, we investigated and compared the stability and age friendliness of HIPPEs stabilized with egg yolk and carboxymethyl cellulose (EYCMC) in different phase behaviors. The results revealed differences in particle size, aggregation state, charge potential, and stability of secondary and tertiary structures of EYCMC. The behavior of EYCMC at the oil-water interface was mainly divided into three phases: rapid diffusion, permeation, and reorganization. The electrostatic interaction, kinetic hindrance, and depletion attraction were the mechanisms primarily involved in stabilizing HIPPEs by EYCMC. Rheological analysis results indicated that HIPPEs had excellent viscoelasticity, structural recovery properties and yield stress. HIPPEs were used in 3D printing, electronic nose testing, IDDSI testing and in vitro digestive simulations for the elderly, demonstrating a fine appearance, safe consumption and bioaccessibility of β-carotene. Soluble complexes showed the best stability and age friendliness compared to other aggregated forms. This study serves as a foundational source of information for developing innovative foods utilizing HIPPEs.

A comprehensive review on the recent trends in extractions, pretreatments and modifications of plant-based proteins

Plant-based proteins offer sustainable and nutritious alternatives to animal proteins with their techno-functional attributes influencing product quality and designer food development. Due to the inherent complexities of plant proteins, proper extraction and modifications are vital for their effective utilization. This review highlights the emerging sources of plant-based proteins, and the recent statistics of the techniques employed for pretreatment, extraction, and modifications. The pretreatment, extraction and modification approach to modify plant proteins have been classified, addressed, and the recent applications of such methodologies are duly indicated. Furthermore, this study furnishes novel perspectives regarding the potential impacts of emerging technologies on the intricate dynamics of plant proteins. A thorough review of 100 articles (2018-2024) shows the researchers' keen interest in investigating novel plant proteins and how they can be used; seeds being the main source for protein extraction, followed by legumes. Use of by-products as a protein source is increasing rapidly, which is noteworthy. Protein studies still lack knowledge on protein fraction, antinutrients, and pretreatments. The use of physical methods and their combination with other techniques are increasing for effective and environmentally friendly extraction and modification of plant proteins. Several studies explore the effect of protein changes on their function and nutrition, especially with a goal of replacing ingredients with plant proteins that have improved or enhanced qualities. However, the next step is to investigate the sophisticated modification methods for deeper insights into food safety and toxicity.

Modulation of physico-chemical and technofunctional properties of quinoa protein isolate: Effect of precipitation acid

The typically low solubility and gelation capacity of plant proteins can impose challenges in the design of high-quality plant-based foods. The acid used during the precipitation step of plant protein isolate extraction can influence protein functionality. Here, acetic acid and citric acid were used to extract quinoa protein isolate (QPI) from quinoa flour, as these acids are more kosmotropic than the commonly used HCl, promoting the stabilisation of the native protein structure. While proximate analysis showed that total protein was similar for the three isolates, precipitation with kosmotropic acids increased soluble protein, which correlated positively with gel strength. Microstructure analysis revealed that these gels contained a less porous protein network with lipid droplet inclusions. This study shows that the choice of precipitation acid offers an opportunity to tailor the properties of quinoa protein isolate for application, a strategy that is likely applicable to other plant protein isolates.

Tunning the hydrophobic performance and thermal stability of pectin film by acetic anhydride esterification

Pectin, a polysaccharide found in plant cell walls, is characterized by a high abundance of hydroxyl groups and carboxylic acid groups, which results in a strong affinity for water and limits its suitability as a film material. This study aimed to modulate the esterification degree of PEC films by adjusting the concentration of acetic anhydride, and assess the impact of acetic anhydride esterification modification on the properties of the resultant PEC films. The results demonstrated successful grafting of acetic anhydride onto the galacturonic acid ring in the PEC molecule through the esterification process. The hydrophobicity, thermal stability, barrier properties, and mechanical properties of the esterified PEC films were investigated. Among the various concentrations tested, the E-PEC-0.25 film exhibited the highest contact angle of 103.46° and tensile strength of 33.44 MPa, showcasing optimal performance. The E-PEC-0.1 film achieved the highest esterification degree of 0.94 and elongation at a break of 21.11 %. It also exhibited the transparency of 11.66 and the lowest water vapor transmission rate of 0.56 g·mm/(m2·h·kpa). Additionally, TGA and DSC tests revealed enhanced thermal stability of the esterification-prepared films. These findings highlight the potential of acetic anhydride tuning as a promising strategy for optimizing pectin film production.

Liquid-liquid biopolymers aqueous solution segregative phase separation in food: From fundamentals to applications-A review

As a result of the spontaneous movement of molecules, liquid-liquid biopolymer segregative phase separation takes place in an aqueous solution. The efficacy of this type of separation can be optimized under conditions where variables such as pH, temperature, and molecular concentrations have minimal impact on its dynamics. Recently, interest in the applications of biopolymers and their segregative phase separation-associated molecular stratification has increased, particularly in the food industry, where these methods permit the purification of specific particles and the embedding of microcapsules. The present review offers a comprehensive examination of the theoretical mechanisms that regulate the liquid-liquid biopolymers aqueous solution segregative phase separation, the factors that may exert an impact on this procedure, and the importance of this particular separation method in the context of food science. These discussion points also address existing difficulties and future possibilities related to the use of segregative phase separation in food applications. This highlights the potential for the design of novel functional foods and the enhancement of food properties.

Simple and complex coacervation in systems involving plant proteins

Plant-based foods are gaining popularity as alternatives to meat and dairy products due to sustainability and health concerns. As a consequence, there is a renewed interest in the phase behaviour of plant proteins and of mixtures of plant proteins and polysaccharides, in particular in the cases where coacervation is found to occur, i.e., liquid-liquid phase separation (LLPS) into two phases, one of which is rich in biopolymers and one of which is poor in biopolymer. Here we review recent research into both simple and complex coacervation in systems involving plant proteins, and their applications in food- as well as other technologies, such as microencapsulation, microgel production, adhesives, biopolymer films, and more.

Improving the colloidal stability of pectin-phycocyanin complexes by increasing the mixing ratio

In the food industry, the phycobiliprotein phycocyanin acts as a color pigment or the functional part of the superfood "Spirulina." It is industrially extracted from Arthrospira platensis. Current scientific research is focusing on finding complex partners with the potential to stabilize phycocyanin against its sensitivity toward heating and pH changes. Less attention is paid to the factors that influence complexation. This study focuses on the mixing ratio of phycocyanin with pectin. Phycocyanin concentration was fixed, and the mixing ratios ranged from 0.67 to 2.50 (pectin:phycocyanin). All samples were analyzed for their color, size, microscopic structure, zeta potential, and sedimentation stability before and after heating at 85°C. It was found that increasing the pectin content fostered the initial interactions with the protein and chromophore, resulting in a color shift from blue to turquoise. The size of the complexes decreased from several micrometers to nanometers with increasing pectin concentration. Those smaller complexes that were formed at a mixing ratio of 2.5 showed a higher colloidal stability over a period of ∼2 days. It is suggested that at a low mixing ratio (0.67), phycocyanin cannot be completely entrapped within the complexes and attaches to the complex surface as well. This results in aggregation and precipitation of the complexes upon heating. With increasing aggregation and consequently size as well as density of the complexes, sedimentation was accelerated. PRACTICAL APPLICATION: Under acidic conditions, as found in many foods and beverages (e.g., soft drinks, hard candy), phycocyanin tends to agglomerate and lose its color. Specifically heating, triggers denaturation, causing phycocyanin to aggregate and lose vital protein-chromophore interactions necessary to maintain a blue color. To prevent precipitation of the phycocyanin-pectin complexes, increasing the amount of pectin to a ratio of at least 2.0 is effective. This illustrates how adjusting the mixing ratio improves stability. Conversely, lower mixing ratios  induce color precipitation, valuable in purification processes. Thus, practical use of biopolymer-complexes, requires determination of the optimal mixing ratio for the desired effect.

Effect of gum arabic and thermal modification of whey protein isolate on the characteristics of Cornus officinalis flavonoid microcapsules

Whey protein isolates (WPIs) were treated at 50, 60, 70, and 80°C to obtain thermally modified WPI. Gum arabic (GA) and thermal modification of WPI were used as novel wall materials to improve the quality of Cornus officinalis flavonoid (COF) microcapsules using microwave freeze-drying technique in this study. Results showed that all the thermal modification treatment decreased emulsifying activity index of WPI, whereas the solubility and emulsifying stability index (ESI) of WPI gradually increased with the increase of heating temperature. Compared to the untreated protein, the thermal modification treatment at 70°C increased the solubility and ESI of WPI by 14.91% ± 0.71% and 26.70% ± 0.94%, respectively. The microcapsules prepared with the modified protein at 60°C had the highest encapsulation efficiency (95.13% ± 2.36%), the lowest moisture content (1.42% ± 0.34%), and the highest solubility (84.41% ± 0.91). Scanning electron microscopy images showed that COF microcapsules were uniformly spherical, and the sizes of the microcapsules were in the following order: 12.42 ± 0.37 µm (80°C) > 11.7 ± 0.23 µm (untreated group) > 9.44 ± 0.33 µm (60°C) > 9.24 ± 0.14 µm (50°C) > 7.69 ± 0.29 µm (70°C). In the simulated in vitro digestion experiments, the release rate of COF microcapsules in the gastric digestion phase was less than that in the intestinal digestion phase, and it reached 66.46% at intestinal digestion phase. These results suggested that heated WPI and GA could be an effective nanocarrier to enhance the stability of COF.

Emulsification and encapsulation properties of conjugates formed between whey protein isolate and carboxymethyl cellulose under acidic conditions

In this study, carboxymethyl cellulose (CMC) was used to interact with whey protein isolate (WPI) to prepare conjugates as emulsifiers and embedding agents, which can be used under acidic conditions. Firstly, the effects of ratios and pH values on the formation of WPI-CMC conjugates were investigated. The turbidity and particle size of WPI were reduced in the presence of CMC at pH 4.6 (near the isoelectric point). Then the characterization of physicochemical properties indicated that electrostatic interactions played a major role in the formation of WPI-CMC conjugates, thereby changing the structure and function of conjugates. CMC and WPI reached the optimal aggregation state at pH 4.6 and a ratio of 4:1. The conjugates exhibited excellent emulsifying activity and stability for the oil-in-water emulsions. WPI-CMC conjugates also could provide protection to allicin by preventing degradation under environmental stresses, while maintaining its antioxidant activity.

Emulsifying properties of O/W emulsion stabilized by soy protein isolate and γ-polyglutamic acid electrostatic complex

In order to improve the emulsifying properties of soy protein around isoelectric point, soy protein isolate (SPI) and γ-polyglutamic acid (γ-PGA) complexes were prepared by electrostatic interaction. The formation of SPI-γ-PGA electrostatic complex and emulsifying properties were investigated by monitoring turbidity, zeta potential, intrinsic fluorophores, emulsion characterization, and microstructure observation. The results showed that the formation of SPI-γ-PGA electrostatic complex was identified through turbidimetric analysis and zeta-potential measurement. Intrinsic fluorescence spectrum indicated internal structure changes of electrostatic complexes. Furthermore, SPI-γ-PGA complex-stabilized emulsions showed better stability with small droplet sizes and slow growth as well as the uniform microstructure around the isoelectric point (pH 4.0-5.0) than SPI-formed emulsions. Under the different thermal treatments and ionic strengths, emulsions stabilized by SPI-γ-PGA-soluble complex resulted in improved emulsion stability to environmental stresses. This may be attributed to the increased steric repulsion and electrostatic repulsion by SPI-γ-PGA complexes at oil-water interfaces. The findings derived from this research would provide theoretical reference about SPI-γ-PGA electrostatic complex that can be applied in acid beverages and developed a novel plant-based sustainable stabilizer for emulsions. PRACTICAL APPLICATION: The electrostatic interaction between SPI and γ-PGA improved the emulsifying characteristics of soy protein around isoelectric point. The results derived from this research would expand applications of SPI-γ-PGA-soluble electrostatic complex that can be applied in acid beverages, as well as a novel plant-based sustainable stabilizer for emulsions.

Influence of pectin domains and protein on the viscosity and gelation properties of alkali-extracted pectin from green tea residue

Alkaline pectin extract (APE) from green tea residues has lower viscosity and gelation properties than commercial citrus pectin. To improve the viscosity and gelation properties of APE, four treatments, namely degradation of homogalacturonan (HG) or rhamnogalacturonan (RG) I domains, esterification, and protein removal and degradation, were applied. With proper degradation of the HG or RG I domains (arabinan or galactan), the viscosity of APE increased from 12 to 2.5×104 or 5.0×103 mPa·s, respectively, and the numbers further increased by approximately 500 times with the addition of Ca2+. Other treatments had slight effects on APE viscosity. The strongest gel (G' = 6.7 × 103 Pa and G″ = 930 Pa) was made using the polygalacturonase treated APE with Ca2+ addition. Degradation of the HG domain or protein enhanced APE's self-crosslink effect, while all methods except protein degradation improved the calcium bridging effect, potentially improving the market potential of pectin from biowaste.

Interaction mechanisms of peanut protein isolate and high methoxyl pectin with ultrasound treatment: The effect of ultrasound parameters, biopolymer ratio, and pH

Ultrasound could effectively change molecular structure of proteins, polysaccharides, and their interactions, and was used to treat the peanut protein isolate-high methoxy pectin (PPI-HMP) complexes in this study. Effects of different ultrasound parameters, PPI-HMP mixing ratio (40:1-5:2), and pH (2.0-8.0) on the PPI-HMP interactions were investigated. Turbidity, solution appearance, and Zeta-potential analysis revealed an electrostatic interaction between PPI and HMP from pH 2.0 to pH 6.0. Ultrasound changed the tertiary structure conformation of PPI according to the surface hydrophobicity analysis. Increased ultrasound power density and pH broke the hydrogen bonds between the complexes according to Fourier transform infrared spectroscopy analysis. Apparent viscosity and confocal laser scanning microscopy analysis showed that appropriate ultrasound treatment (5.43 W/cm3, 25 min, 25 °C) reduced the viscosity of the complexes, and enhanced the electrostatic and hydrophobic interactions between PPI and HMP. These findings will contribute to the application of PPI-HMP complexes in the food industry.

Functionality of pea protein isolate solutions is affected by reconstitution conditions

Pea protein isolate (PPI), a high-concentration protein ingredient derived from peas, is increasingly utilized in food applications, including beverages, meat or dairy alternatives, and baked goods. The protein extraction process typically used to manufacture PPI renders the protein highly denatured, which can have a negative impact on its functionality. Therefore, it is critical to understand how to prepare and utilize PPI to maximize its functionality. The current study evaluates the effect of select reconstitution conditions on the structure and functionality of PPI, across a range of protein concentrations (4%-10%) relevant to a variety of food applications. Temperature during reconstitution with water and hydration time impacted both protein hydration and its functionality. Increasing reconstitution temperature from 20 to 60°C and increasing hydration time from 10 to 40 min decreased PPI particle size in solution and increased PPI solubility. Viscosity of PPI solutions also increased with mild heating and longer hydration time, whereas their flow behavior was highly dependent on protein concentration. Experimental data demonstrates that reconstitution conditions have a significant impact on PPI functionality. These findings can help food formulators develop high-quality food products that utilize PPI as a functional ingredient. PRACTICAL APPLICATION: Protein in commercially available pea protein isolates (PPIs) is usually highly denatured, and thus, it is important to find ways to maximize its functionality in practical applications. The findings of this study inform food scientists how to leverage PPI at various protein concentrations with optimal reconstitution conditions to develop high-quality products. Generally, mild heating and longer hydration times improve PPI functional performance.

The Nutritional and Functional Properties of Protein Isolates from Defatted Chia Flour Using Different Extraction pH

This study aims to determine the effects of various alkaline pHs on the nutritional and functional properties of protein isolated from defatted chia flour (DCF). The DCF isolated using alkali extraction method at pH 8.5, 10.0, and 12.0 were coded as CPI-8.5, CPI-10.0, and CPI-12.0, respectively. The highest extraction yield and protein recovery yield was demonstrated by CPI-12.0 (19.10 and 59.63%, respectively), with a total protein content of 74.53%, and glutelin showed the highest portion (79.95%). The CPI-12.0 also demonstrated the most elevated essential (36.87%), hydrophobic (33.81%), and aromatic (15.54%) amino acid content among other samples. The DCF exhibited the highest water (23.90 gg-1) and oil (8.23 gg-1) absorption capacity, whereas the CPI-8.5 showed the highest protein solubility (72.31%) at pH 11. DCF demonstrated the highest emulsifying capacity at pH 11 (82.13%), but the highest stability was shown at pH 5 (82.05%). Furthermore, CPI-12.0 at pH 11 shows the highest foaming capacity (83.16%) and stability (83.10%). Despite that, the CPI-10.0 manifested the highest antioxidant capacity (DPPH: 42.48%; ABTS: 66.23%; FRAP: 0.19), as well as ACE-I (35.67%). Overall, the extraction pH had significant effects in producing chia protein isolates (CPI) with improved nutritional and functional qualities.

Effect of Stir-Frying on Physicochemical and Functional Properties of Oat Protein Isolates

The heat treatment required for the deactivation of enzymes was carried out on crop species such as oats. Stir-frying, a frequently employed method for enzyme inactivation to preserve their desirable shelf life, can result in diminished nutritional value and protein degeneration. The mechanism by which stir-frying affects the oat protein remains largely unknown. Therefore, this study aimed to investigate the physicochemical and functional properties of the extracted oat protein isolates (OPI) at different stir-frying durations (0, 10, 20, and 30 min) at a temperature of 230 °C. The findings of this study demonstrated that stir-frying led to a decrease in the content of amino acids (AA), potentially attributed to the involvement of certain amino acids in the Maillard reaction. As the time of stir-frying increased, the secondary structure of OPI underwent changes: specifically, β-turns transformed into β-sheets. The process of protein denaturation and redistribution of chemical bonds resulted in an increase in the disulfide bond content of OPI, leading to aggregation, large particle size, and reduced digestibility. However, the water retention properties, foaming properties, and emulsification properties of OPI showed improvement. These findings provide valuable insights for the controlled and precise processing of oats and highlight the potential of OPI as a functional food.

Enhancing phycocyanin solubility via complexation with fucoidan or κ-carrageenan and improving phycocyanin color stability by encapsulation in alginate-pregelatinized corn starch composite gel beads

Phycocyanin (PC), as a pigment-protein complex, aggregates and precipitates in acidic environments. In this context, complex formation with anionic polysaccharides is a strategy to enhance protein solubility. Besides, acidic conditions negatively affect the inherent blue color of PC, which can be prevented by encapsulation. Thereupon, in the present study, two different biopolymer-based systems, namely complexes and hydrogel beads, were prepared to increase PC solubility and its color stability under acidic conditions, respectively. Fucoidan and κ-carrageenan (KC) were separately utilized to make a complex with PC. Calcium alginate-pregelatinized corn starch (PCS) composite gel beads were used to encapsulate PC. The prepared samples were added into model systems simulating acidic conditions and then characterized during storage at 4 and 25 °C under dark conditions. Appropriate colloidal stabilities were observed for fucoidan/PC and KC/PC model systems. The color of the samples remained stable at 4 °C. As well, the bead carriers (i.e. alginate-PCS) properly protected PC against low pH conditions over time at 4 °C. Thereupon, the blue color of the beads satisfactorily remained stable at this temperature. The findings showed that complexation with fucoidan or KC and encapsulation in mixed hydrogel beads are promising routes for improving PC solubility and its color stability, respectively.

Membrane Emulsification as an Emerging Method for Lacticaseibacillus rhamnosus GG® Encapsulation

Techniques capable of producing small-sized probiotic microcapsules with high encapsulation yields are of industrial and scientific interest. In this study, an innovative membrane emulsification system was investigated in the production of microcapsules containing Lacticaseibacillus rhamnosus GG® (Lr), sodium alginate (ALG), and whey protein (WPI), rice protein (RPC), or pea protein (PPC) as encapsulating agents. The microcapsules were characterized by particle size distribution, optical microscopy, encapsulation yield, morphology, water activity, hygroscopicity, thermal properties, Fourier-transform infrared spectroscopy (FTIR), and probiotic survival during in vitro simulation of gastrointestinal conditions. The innovative encapsulation technique resulted in microcapsules with diameters varying between 18 and 29 μm, and encapsulation yields > 93%. Combining alginate and whey, rice, or pea protein improved encapsulation efficiency and thermal properties. The encapsulation provided resistance to gastrointestinal fluids, resulting in high probiotic viability at the end of the intestinal phase (> 7.18 log CFU g-1). The proposed encapsulation technology represents an attractive alternative to developing probiotic microcapsules for future food applications.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11947-023-03099-w.

Encapsulation of lycopene into electrospun nanofibers from whey protein isolate-Tricholoma lobayense polysaccharide complex stabilized emulsions: Structural characterization, storage stability, in vitro release, and cellular evaluation

In this study, lycopene-loaded nanofibers were successfully fabricated by electrospinning of oil-in-water (O/W) emulsions stabilized by whey protein isolate-polysaccharide TLH-3 (WPI-TLH-3) complexes. The lycopene encapsulated in the emulsion-based nanofibers exhibited enhanced photostability and thermostability, and achieved improved targeted small intestine-specific release. The release of lycopene from the nanofibers followed Fickian diffusion mechanism in simulated gastric fluid (SGF) and first-order model in simulated intestinal fluid (SIF) with the enhanced release rates. The bioaccessibility and cellular uptake efficiency of lycopene in micelles by Caco-2 cells after in vitro digestion were significantly improved. The intestinal membrane permeability and transmembrane transport efficiency of lycopene in micelles across Caco-2 cells monolayer were greatly elevated, thus promoting the effective absorption and intracellular antioxidant activity of lycopene. This work opens a potential approach for electrospinning of emulsions stabilized by protein-polysaccharide complexes as a novel delivery system for liposoluble nutrients with enhanced bioavailability in functional food industries.

Effect of γ-polyglutamic acid on the physicochemical properties of soybean protein isolate-stabilized O/W emulsion

An increased interest has been observed in the application of soybean protein isolate (SPI) into O/W emulsion because of the amphipathic characteristics of SPI. However, at pH around 4.5, SPI was almost lost its hydrophilic characteristic, thus greatly limiting its application in emulsion under an acidic environment. Therefore, this drawback of SPI needs to be urgently solved. This study aims to investigate the effect of γ-polyglutamic acid (γ-PGA) on physicochemical properties of SPI-stabilized O/W emulsion. The results suggested that the interaction between γ-PGA and SPI improved the SPI solubility in solution, and increased emulsifying properties of SPI in the pH range of 4.0-5.0 via electrostatic interaction. Meanwhile, the charge neutralisation between SPI emulsions with γ-PGA was confirmed via ζ-potentiometry. With the presence of γ-PGA in emulsion at pH 4.0 and 5.0, the electrostatic complexation between SPI and anionic γ-PGA exhibited decreased the viscosity of SPI emulsion, which might be related to the phenomenon as indicated by the confocal laser scanning microscope measurements. Therefore, the electrostatic complexation between SPI and γ-PGA suggested that the promising potential of γ-PGA to be used in SPI-stabilized O/W emulsion under an acidic environment.

The droplet breakup model and characteristics of pH-shifted peanut protein isolate-high methoxyl pectin stabilised emulsions under ultrasound

The effect of pH on the occurrence states of peanut protein isolate (PPI) and high methoxyl pectin (HMP), and droplet breakup model of the emulsions under ultrasound were studied. Particle size distribution and scanning electron microscopy results showed that PPI-HMP existed a soluble complex at pH 5.0, had no interaction at pH 7.0, and was co-soluble at pH 9.0. Droplet breakup model results revealed that the characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and 9.0. The average diameter of the droplet well satisfied the model. According to rheological properties, interface tension, and microstructure, the formation mechanism and characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and pH 9.0. The research provided a reference for constructing emulsions using pH-shifted PPI-HMP under ultrasound.

Influence mechanism of polysaccharides induced Maillard reaction on plant proteins structure and functional properties: A review

Plant proteins have high nutritional value, a wide range of sources and low cost. However, it is easily affected by the environmental factors of processing and lead the problem of poor functionality. These problems of plant proteins can be improved by the polysaccharides induced Maillard reaction. The interaction between proteins and polysaccharides through Maillard reaction can change the structure of proteins as well as improve the functional properties and biological activity. The products of Maillard reaction, such as reductone intermediates, heterocyclic compounds and melanoidins have certain antioxidant, antibacterial and other biological activities. However, heterocyclic amines, acrylamide, and products generated in the advanced stage of the Maillard reaction also have a negative impact, which may increase cytotoxicity and be associated with chronic diseases. Therefore, it is necessary to effectively control the process of Maillard reaction. This review focuses on the modification of plant proteins by polysaccharide-induced Maillard reaction and the effects of Maillard reaction on protein structure, functional properties and biological activity. It also points out how to accurately reflect the changes of protein structure in Maillard reaction. In addition, it also points out the application ways of plant protein-polysaccharide complexes in the food industry, for example, emulsifiers, delivery carriers of functional substances, and natural antioxidants due to their improved solubility, emulsifying, gelling and antioxidant properties. This review provides theoretical support for controlling Maillard reaction based on protein structure.

Microstructure, rheological and water mobility behaviour of plant-based protein isolates (pea and quinoa) and locust bean gum mixtures

This work reports the impact of locust bean gum (LBG) in the continuous phase of plant-based proteins, i.e. quinoa protein (QPI) and pea protein isolates (PPI). Experimental measurements such as confocal microscopy, rheological analysis and water mobility via nuclear magnetic resonance (nmr) spin-spin relaxation time (T2) were carried out. The influence of LBG on the rheological properties of QPI and PPI is consistent with an exchange-based nmr interpretation of T2 for biopolymer and water. Addition of LBG increased the viscoelastic properties (storage and loss modulus) and shear viscosities of the mixtures. LBG interacted with both plant proteins, resulting in the formation of more dense protein networks and protein coacervates. A stronger interaction between the PPI and LBG was observed, resulting in higher shear viscosities with lower water mobility as compared to QPI:LBG formulations. Results indicated that the interaction between the protein and polysaccharide played a significant role in the microstructure, its rheological properties and consequently water mobility.

Application of definitive screening design to optimization of the protein extraction and functional properties of proteins in Auricularia auricula

BACKGROUND

Auricularia auricula (A. auricula) is one of the most abundant sources of plant protein in edible fungi. Problems of low protein yield exist in traditional methods of protein extraction such as alkali extraction and ultrasonic-assisted alkali after pretreatment with enzymes. Thus, the protein extraction process was investigated and optimized using a definitive screening design from A. auricula to improve the protein yield under practical operating conditions of temperature, the concentration of NaCl, meal/water ratio, extraction time and pH.

RESULTS

The yield of protein isolates of the isoelectric-ammonium sulfate precipitation (9.34% w/w) was obtained almost three times and the protein content (55.23% w/w) was approximately 1.6 times that of the traditional extraction method of isoelectric precipitation. Next, the optimized method was successfully applied to the analysis of the functional properties of the protein. A. auricula protein isolate (AAPI) had better solubility, emulsification and foaming capacity than soy protein isolate (SPI) and pea protein isolate (PPI), and the oil holding capacity of AAPI exhibited extremely well, which was approximately five times that of SPI and six times that of PPI. The texture properties of AAPI gel were similar to those of PPI gels.

CONCLUSION

AAPI extracted by the optimized method had a satisfactory yield and had the potential to substitute plant-originated proteins in food processing. © 2022 Society of Chemical Industry.

Plant leaf proteins for food applications: Opportunities and challenges

Plant-based proteins are gaining a lot of attention for their health benefits and are considered as an alternative to animal proteins for developing sustainable food systems. Against the backdrop, ensuring a healthy diet supplemented with good quality protein will be a massive responsibility of governments across the globe. Increasing the yield of food crops has its limitations, including low acceptance of genetically modified crops, land availability for cultivation, and the need for large quantities of agrochemicals. It necessitates the sensible use of existing resources and farm output to derive the proteins. On average, the protein content of plant leaves is similar to that of milk, which can be efficiently tapped for food applications across the globe. There has been limited research on utilizing plant leaf proteins for food product development over the years, which has not been fruitful. However, the current global food production scenario has pushed some leading economies to reconsider the scope of plant leaf proteins with dedicated efforts. It is evident from installing pilot-scale demonstration plants for protein extraction from agro-food residues to cater to the protein demand with product formulation. The present study thoroughly reviews the opportunities and challenges linked to the production of plant leaf proteins, including its nutritional aspects, extraction and purification strategies, anti-nutritional factors, functional and sensory properties in food product development, and finally, its impact on the environment. Practical Application: Plant leaf proteins are one of the sustainable and alternative source of proteins. It can be produced in most of the agroclimatic conditions without requiring much agricultural inputs. It's functional properties are unique and finds application in novel food product formulations.

Conformation changes and emulsifying properties of myofibrillar proteins in water: Effects of electrostatic interaction with chitosan

Great interests have been attracted toward muscle protein in a water-soluble state with improved functionality for further designing meat protein fortified low-salt functional foods. In the present study, electrostatic interaction of chitosan (CH) with myofibrillar proteins (MP) in water aqueous solution was investigated, and the linked structure changes and emulsion stabilization of MP were studied. Results showed that the electrostatic interaction inhibited MP aggregation, and smaller particle size complexes were formed at pH 6.0, leading to the loss of β-sheet contents and recovery of α-helix contents with decreasing MP/CH mixing ratio (5:1 and 1:1). The tertiary structure confirmed the conformation changes of MP in which more hydrophobic groups and active sulfhydryl groups were exposed (P < 0.05), and the fluorescence was also quenched. With decreasing mixing ratio, the droplet size of emulsion decreased (P < 0.05), while the absorbed protein content increased (P < 0.05). After 7 d of storage, complex at a ratio of 1:1 displayed desirable emulsion stability, which could be due to the improved emulsifying capacity, enhanced electrostatic repulsion and steric effects. These findings provide a better understanding of conformation changes of MP in water aqueous solution induced by electrostatic interactions at mild acidic pH and help to fabricate stable protein/polysaccharide emulsification systems for further developing meat protein-based functional food to deliver health.

Improved Stabilization and In Vitro Digestibility of Mulberry Anthocyanins by Double Emulsion with Pea Protein Isolate and Xanthan Gum

There is significant evidence that double emulsion has great potential for successfully encapsulating anthocyanins. However, few research studies are currently using a protein-polysaccharide mixture as a stable emulsifier for double emulsion. This study aimed to improve the stability and in vitro digestibility of mulberry anthocyanins (MAs) by employing a double emulsion composed of pea protein isolate (PPI) and xanthan gum (XG). The influence of various XG concentrations (0%, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%) and different temperatures (5 °C, 25 °C, 45 °C, 65 °C) on the physical stability and the thermal degradation of MAs from double emulsions were investigated. In addition, the physicochemical properties of double emulsions and the release performance of MAs during in vitro simulated digestion were evaluated. It was determined that the double emulsion possessed the most stable physical characteristics with the 1% XG addition. The PPI-1% XG double emulsion, when compared to the PPI-only double emulsion, expressed higher thermal stability with a retention rate of 83.19 ± 0.67% and a half-life of 78.07 ± 4.72 days. Furthermore, the results of in vitro simulated digestion demonstrated that the MAs in the PPI-1% XG double emulsion were well-protected at oral and gastric with ample release found in the intestine, which was dissimilar to findings for the PPI-only double emulsion. Ultimately, it was concluded that the double emulsion constructed by the protein-polysaccharide system is a quality alternative for improving stability and absorption with applicability to a variety of food and beverage systems.

Fabrication and Characterization of Chitosan-Pea Protein Isolate Nanoparticles

Chitosan (CS) and pea protein isolate (PPI) were used as raw materials to prepare nanoparticles. The structures and functional properties of the nanoparticles with three ratios (1:1, 1:2 1:3, CS:PPI) were evaluated. The particle sizes of chitosan-pea protein isolate (CS-PPI) nanoparticles with the ratios of 1:1, 1:2, and 1:3 were 802.95 ± 71.94, 807.10 ± 86.22, and 767.75 ± 110.10 nm, respectively, and there were no significant differences. Through the analysis of turbidity, endogenous fluorescence spectroscopy and Fourier transform infrared spectroscopy, the interaction between CS and PPI was mainly caused by electrostatic mutual attraction and hydrogen bonding. In terms of interface properties, the contact angles of nanoparticles with the ratio of 1:1, 1:2, and 1:3 were 119.2°, 112.3°, and 107.0°, respectively. The emulsifying activity (EAI) of the nanoparticles was related to the proportion of protein. The nanoparticle with the ratio of 1:1 had the highest potential and the best thermal stability. From the observation of their morphology by transmission electron microscopy, it could be seen that the nanoparticles with a ratio of 1:3 were the closest to spherical. This study provides a theoretical basis for the design of CS-PPI nanoparticles and their applications in promoting emulsion stabilization and the delivery of active substances using emulsions.

Encapsulation of Vitamin B12 by Complex Coacervation of Whey Protein Concentrate-Pectin; Optimization and Characterization

Vitamin B12 (VB12) is one of the essential vitamins for the body, which is sensitive to light, heat, oxidizing agents, and acidic and alkaline substances. Therefore, the encapsulation of VB12 can be one of the ways to protect it against processing and environmental conditions in food. In this work, the influence of pectin concentration (0.5−1% w/v), whey protein concentrate (WPC) level (4−8% w/v) and pH (3−9) on some properties of VB12-loaded pectin−WPC complex carriers was investigated by response surface methodology (RSM). The findings showed that under optimum conditions (1:6.47, pectin:WPC and pH = 6.6), the encapsulation efficiency (EE), stability, viscosity, particle size and solubility of complex carriers were 80.71%, 85.38%, 39.58 mPa·s, 7.07 µm and 65.86%, respectively. Additionally, the formation of complex coacervate was confirmed by Fourier-transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM). In addition, it was revealed that the most important factor in VB12 encapsulation was pH; at a pH < isoelectric point of WPC (pH = 3), in comparison with higher pH values (6 and 9), a stronger complex was formed between pectin and WPC, which led to an increase in EE, lightness parameter, particle size and water activity, as well as a decrease in the zeta-potential and porosity of complex carriers.

Hesperetin (citrus peel flavonoid aglycone) encapsulation using pea protein-high methoxyl pectin electrostatic complexes: complex optimization and biological activity

BACKGROUND

Orange pomace polyphenols have potential for use as nutraceutical ingredients in functional foods and beverages. However, owing to their low water solubility and bioaccessibility, they are not being utilized to their full potential. The goal of this research is to assess the impact of encapsulation on hesperetin (HT - a model orange polyphenol) water solubility, antioxidant activity, and in vitro bioaccessibility.

RESULTS

In this study, a citrus flavonoid aglycone, HT, was encapsulated within water-dispersible colloidal complexes (d = 350 ± 8 nm) formed by electrostatic attraction of pea protein isolate and high-methoxyl pectin at a mixing ratio of 1:1 (v/v) and pH 4. The maximum amount of HT that could be dispersed in water was much higher for the encapsulated form (99 ± 7 μg mL^-1 ) than the non-encapsulated form (<10 μg mL^-1 ). The radical scavenging activity of the encapsulated HT (>90%, pH 4) was much higher than the non-encapsulated form (<15% at pH 4 or 7). The in vitro bioaccessibility of encapsulated HT (27 ± 7%) was also much higher than the non-encapsulated form (<7%).

CONCLUSION

These results suggest that a well-designed, biopolymer-based delivery system may improve the effective incorporation of HT, and potentially other orange pomace polyphenols, into food and beverage products. This could provide an additional high-value use for orange juicing by-products while introducing a new nutraceutical product to the food and beverage industry. © 2022 Society of Chemical Industry.

Feasibility of membrane ultrafiltration as a single-step clarification and fractionation of microalgal protein hydrolysates

Protein hydrolysates are one of the most valuable products that can be obtained from lipid-extracted microalgae (LEA). The advantages of protein hydrolysates over other protein products encompass enhanced solubility, digestibility, and potential bioactivity. The development of an economically feasible process to produce protein hydrolysates depends on maximizing the recovery of hydrolyzed native protein from the lipid-extracted algal biomass and subsequent fractionation of hydrolyzed protein slurry. Previously, we reported a method for fractionation of enzymatically generated protein hydrolysates by acidic precipitation of algal cell debris and unhydrolyzed protein, precipitate wash, centrifugation, and depth filtration. The present study evaluates tangential flow ultrafiltration as a single-step alternative to centrifugation, precipitate wash, and depth filtration. The results demonstrate that the tangential flow ultrafiltration process has a potential that deserves further investigation. First, the membrane diafiltration process uses a single and easily scalable unit operation (tangential flow filtration) to separate and “wash out” hydrolyzed protein from the algal residue. Second, the protein recovery yield achieved with the tangential flow process was >70% compared to 64% previously achieved by centrifugation and depth filtration methods. Finally, protein hydrolysates obtained by membrane ultrafiltration exhibited slightly better heat and pH stability.

The Current Situation of Pea Protein and Its Application in the Food Industry

Pea (Pisum sativum) is an important source of nutritional components and is rich in protein, starch, and fiber. Pea protein is considered a high-quality protein and a functional ingredient in the global industry due to its low allergenicity, high protein content, availability, affordability, and deriving from a sustainable crop. Moreover, pea protein has excellent functional properties such as solubility, water, and oil holding capacity, emulsion ability, gelation, and viscosity. Therefore, these functional properties make pea protein a promising ingredient in the food industry. Furthermore, several extraction techniques are used to obtain pea protein isolate and concentrate, including dry fractionation, wet fractionation, salt extraction, and mild fractionation methods. Dry fractionation is chemical-free, has no loss of native functionality, no water use, and is cost-effective, but the protein purity is comparatively low compared to wet extraction. Pea protein can be used as a food emulsifier, encapsulating material, a biodegradable natural polymer, and also in cereals, bakery, dairy, and meat products. Therefore, in this review, we detail the key properties related to extraction techniques, chemistry, and structure, functional properties, and modification techniques, along with their suitable application and health attributes.

Influence of Chitosan and Glucono-δ-Lactone on the Gel Properties, Microstructural and Textural Modification of Pea-Based Tofu-Type Product

This study investigated the effects of the addition of chitosan (0–1.0%) or glucono-δ-lactone (GDL) (0–60 mM) on the gel properties, microstructure, and texture of pea-based tofu-type product. Following the addition of 0.5% chitosan or 20 mM GDL, we observed a significant decrease in the hardness and cohesiveness of the tofu, resulting in a slightly discontinuous network structure with pores smaller than those in samples without chitosan or GDL. SDS-PAGE analysis revealed the induced aggregation of pea legumin (11S) and vicilin (7S) subunits (30, 34, and 50 kDa), legumin α subunit (40 kDa), and legumin β subunit (20 kDa) by chitosan or GDL. It appears that chitosan and GDL could potentially be used as food additives for the development of texture-modified pea-based tofu-type products.

In Vitro Digestion and Storage Stability of β-Carotene-Loaded Nanoemulsion Stabilized by Soy Protein Isolate (SPI)-Citrus Pectin (CP) Complex/Conjugate Prepared with Ultrasound

In this study, we employed the ultrasound-prepared electrostatic complex and covalent conjugate of soy protein isolate (SPI) and citrus pectin (CP) to prepare β-carotene-loaded nanoemulsions. The in vitro digestion and storage stability of nanoemulsions stabilized by different types of emulsifiers were investigated and compared. Nanoemulsions stabilized by ultrasound-treated complex/conjugate showed the highest encapsulation efficiency; during gastric digestion, these nanoemulsions also demonstrated the smallest droplet sizes and the highest absolute values of zeta potential, indicating that both electrostatic complexation/covalent conjugation and ultrasound treatment could significantly improve the stability of the resulting nanoemulsions. In comparison, complexes were more beneficial for the controlled release of β-carotene; however, the conjugate-stabilized nanoemulsion showed an overall higher bioaccessibility. The results were also confirmed by optical micrographs. Furthermore, nanoemulsions stabilized by ultrasound-prepared complexes/conjugates exhibited the highest stability during 14-day storage at 25 °C. The results suggested that ultrasound-prepared SPI–CP complexes and conjugates had great application potential for the delivery of hydrophobic nutrients.

Improving myofibrillar proteins solubility and thermostability in low-ionic strength solution: A review

The development of myofibrillar proteins drinks (MPDs) can provide meat protein nutrition to specific groups of people. However, one major challenge is that myofibrillar proteins (MPs) are insoluble in solutions with a low ionic strength. Another functional constraint is the susceptibility of MPs to heat-induced aggregation. Currently, the primary approach used to improve the water solubility of MPs is to inhibit the assembly of myofilaments. Increasing the thermostability of MPs primarily inhibits the aggregation of myosin or oxidizes myosin to soluble substances. This review focuses on the description of several chemical and physical strategies, with an emphasis on the advantages, disadvantages, and recent progress. Under the myosin filament assembly process and the cross-linking aggregation mechanism, this summary helps improve our understanding of the solution and thermostability of MPs in low-ionic-strength solutions, thus providing new ideas to the development of MPDs.