Development of soy protein isolate-carrageenan conjugates through Maillard reaction for the microencapsulation of Bifidobacterium longum

High internal phase Pickering emulsions stabilized by Zein-hyaluronic acid conjugate particles and their application in active substances protection

In recent years, active substances have been extensively applied in the fields of food, cosmetics, and pharmaceuticals. However, their preservation and transportation have posed challenges due to issues such as oxidation and photodegradation. This study proposes a method for synthesizing Zein-Hyaluronic Acid (Zein-HA) conjugate particles via the Schiff base reaction, utilizing these conjugate particles to encapsulate and protect active substances within a stable emulsion system. Compared to zein, the modified conjugate particles exhibit significantly improved dispersibility, amphiphilicity, interfacial affinity, and emulsifying properties. Consequently, these particles are capable of stabilizing high internal phase Pickering emulsions with an oil phase volume fraction of up to 80 (v/v)%, thereby enabling the carriage of a higher load of active components. Furthermore, the prepared emulsions demonstrate excellent storage stability, resistance to ionic strength (250-2000 mM NaCl), and outstanding antioxidative characteristics. Moreover, after 8 h of UV light exposure, the retention rates of the active substances (curcumin, astaxanthin, and resveratrol) exceed 60 %. Therefore, these emulsions hold substantial potential to be applied as a carrier system in the food, cosmetics, and pharmaceutical industries.

Preparation, characterization and functional evaluation of soy protein isolate-peach gum conjugates prepared by wet heating Maillard reaction

This study was conducted to formulate a conjugate of soy protein isolate (SPI) and peach gum (PG) with improved functional properties, interacting at mass ratios of 1:1, 1:2, 1:3, 2:1, and 2:3 by Maillard reaction via wet heating method. Conjugation efficiency was confirmed by grafting degree (DG) and browning index (BI). Results indicated that DG increased with increasing concentration of PG, and decreased with increasing pH, whereas no remarkable change was observed with increasing reaction time. The conjugates were optimized at a ratio of 1:3. SDS-PAGE confirmed conjugate formation, Fourier transform infrared spectroscopy (FTIR) and circular dichroism (CD) verified conjugate secondary structural changes, and scanning electron microscopy (SEM) indicated significant overall structural changes. The functional properties, solubility, emulsifying stability, water holding, foaming, and antioxidant activity were significantly improved. This study revealed the wet heating method as an effective approach to improve the functional properties of soy protein.

An alginate-based edible coating containing lactic acid bacteria extends the shelf life of fresh strawberry (Fragaria × ananassa Duch.)

Edible coatings, formulated with sodium alginate and various strains of lactic acid bacteria, were evaluated for their effectiveness in extending the shelf life and mitigating microbial risks associated with strawberries. This study specifically employed strains of Lacticaseibacillus paracasei, Lacticaseibacillus rhamnosus, and Lacticaseibacillus plantarum as antimicrobial agents. Through physicochemical property analysis, the alginate-based antimicrobial coating proved most effective in reducing the strawberry weight loss rate, decay index, and ascorbic acid degradation. Over time, all treatments exhibited increased fungal growth. However, strawberries treated with alginate and lactic acid bacteria recorded lower final colony formation counts-6.82 log CFU/g for SA + LPC, 6.04 log CFU/g for SA + LGG, and 6.26 log CFU/g for SA + LP-compared to 8.73 log CFU/g in the control group. In terms of bacterial resistance under gastrointestinal conditions, L. paracasei demonstrated the highest survival rate post-simulated gastric fluid exposure, while L. plantarum showed the greatest resilience post-simulated intestinal fluid exposure. These findings underscore the efficacy of alginate-based antimicrobial coatings in not only enhancing the storage quality of strawberries but also ensuring microbial safety and potential benefits for gut health.

Protective Effects of Laminaria japonica Polysaccharide Composite Microcapsules on the Survival of Lactobacillus plantarum during Simulated Gastrointestinal Digestion and Heat Treatment

To improve probiotics' survivability during gastrointestinal digestion and heat treatment, Lactobacillus plantarum was microencapsulated by spray-drying using Laminaria japonica polysaccharide/sodium caseinate/gelatin (LJP/SC/GE) composites. Thermogravimetry and differential scanning calorimetry results revealed that the denaturation of LJP/SC/GE microcapsules requires higher thermal energy than that of SC/GE microcapsules, and the addition of LJP may improve thermal stability. Zeta potential measurements indicated that, at low pH of the gastric fluid, the negatively charged LJP attracted the positively charged SC/GE, helping to maintain an intact microstructure without disintegration. The encapsulation efficiency of L. plantarum-loaded LJP/SC/GE microcapsules reached about 93.4%, and the survival rate was 46.9% in simulated gastric fluid (SGF) for 2 h and 96.0% in simulated intestinal fluid (SIF) for 2 h. In vitro release experiments showed that the LJP/SC/GE microcapsules could protect the viability of L. plantarum in SGF and release probiotics slowly in SIF. The cell survival of LJP/SC/GE microcapsules was significantly improved during the heat treatment compared to SC/GE microcapsules and free cells. LJP/SC/GE microcapsules can increase the survival of L. plantarum by maintaining the lactate dehydrogenase and Na+-K+-ATPase activity. Overall, this study demonstrates the great potential of LJP/SC/GE microcapsules to protect and deliver probiotics in food and pharmaceutical systems.

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

Stability and programmed sequential release of Lactobacillus plantarum and curcumin encapsulated in bilayer-stabilized W1/O/W2 double emulsion: Effect of pectin as protective shell

In order to overcome the problem that traditional W1/O/W2 double emulsions do not have targeted release performance, thereby better meeting the health needs of consumers, ovalbumin fibrils/pectin-based bilayer-stabilized double emulsion (OP-BDE) co-encapsulated with Lactobacillus plantarum and curcumin was constructed with pectin as the outer protective shell, which was expected to be used in the development of novel functional foods. The effects of pectin coating on the viability of Lactobacillus plantarum under conditions including storage, pasteurization, freeze-thaw cycles and in vitro simulated digestion were investigated. Results showed that pectin as protective shell could significantly enhance the tolerance of Lactobacillus plantarum to various environmental factors. Besides, the adsorption of pectin endowed OP-BDE with higher lipolysis and stronger protective effect on curcumin, remarkably improving the photostability and bioaccessibility of curcumin. In addition, in vitro simulated gastrointestinal release study indicated that OP-BDE possessed programmed sequential release property, allowing curcumin and Lactobacillus plantarum to be released in small intestine and colon, respectively. OP-BDE is the first reported co-delivery emulsion system with programmed release characteristic. This study provides new insights into OP-BDE in constructing co-delivery systems and programmed sequential release of active substances, and has potential reference and application value in actual food production.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Impact of cod skin peptide-ι-carrageenan conjugates prepared via the Maillard reaction on the physical and oxidative stability of Antarctic krill oil emulsions

This research aimed to construct an emulsifier by the Maillard reaction at various times using cod fish skin collagen peptide (CSCP) and ι-carrageenan (ι-car) to stabilize an Antarctic krill oil (AKO) emulsion. This emulsion was then investigated for physicochemical stability, oxidative stability, and gastrointestinal digestibility. The emulsion stability index and emulsifying activity index of Maillard reaction products (MRPs) were increased by 36.32 % and 66.30 %, respectively, at the appropriate graft degree (25.58 %) compared with the mixture of ι-car and CSCP. In vitro digestibility suggested the higher release of free fatty acids (FFAs) of 10d-MRPs-AKO-emulsion, and the highest bioavailability of AST in 10d-MRPs-AKO was found to be 28.48 %. The findings of this study showed the potential of MRPs to improve peptide function, serve as delivery vehicles for bioactive chemicals, and possibly serve as a valuable emulsifier to be used in the food industry.

Conjugation of Soybean Proteins 7S/11S Isolate with Glucose/Fructose in Gels through Wet-Heating Maillard Reaction

Conjugation with glucose (G) and fructose (F) via the Maillard reaction under the wet-heating condition is a natural and non-toxic method of improving the technological functions of 7S/11S proteins in different kinds of gels. It may be used as an affordable supply of emulsifiers and an excellent encapsulating matrix for gels. This study aimed to create a glucose/fructose-conjugated 7S/11S soy protein via the Maillard reaction. The conjugation was confirmed by determining the SDS-PAGE profile and circular dichroism spectra. In addition, these conjugates were comprehensively characterized in terms of grafting degree, browning degree, sulfhydryl content, surface hydrophobicity (H0), and differential scanning calorimetry (DSC) through various reaction times (0, 24, 48, and 72 h) to evaluate their ability to be used in food gels. The functional characteristics of the 7S/11S isolate-G/F conjugate formed at 70 °C, with a high degree of glycosylation and browning, were superior to those obtained at other reaction times. The SDS-PAGE profile indicated that the conjugation between the 7S and 11S proteins and carbohydrate sources of G and F through the Maillard reaction occurred. Secondary structural results revealed that covalent interactions with G and F affected the secondary structural components of 7S/11S proteins, leading to increased random coils. When exposed to moist heating conditions, G and F have significant potential for protein alteration through the Maillard reaction. The results of this study may provide new insights into protein modification and establish the theoretical basis for the therapeutic application of both G and F conjugation with soy proteins in different food matrixes and gels.

Drying of probiotics to enhance the viability during preparation, storage, food application, and digestion: A review

Functional food products containing viable probiotics have become increasingly popular and demand for probiotic ingredients that maintain viability and stability during processing, storage, and gastrointestinal digestions. This has resulted in heightened research and development of powdered probiotic ingredients. The aim of this review is to overview the development of dried probiotics from upstream identification to downstream applications in food. Free probiotic bacteria are susceptible to various environmental stresses during food processing, storage, and after ingestion, necessitating additional materials and processes to preserve their activity for delivery to the colon. Various classic and emerging thermal and nonthermal drying technologies are discussed for their efficiency in preparing dehydrated probiotics, and strategies for enhancing probiotic survival after dehydration are highlighted. Both the formulation and drying technology can influence the microbiological and physical properties of powdered probiotics that are to be characterized comprehensively with various techniques. Furthermore, quality control during probiotic manufacturing and strategies of incorporating powdered probiotics into liquid and solid food products are discussed. As emerging technologies, structure-design principles to encapsulate probiotics in engineered structures and protective materials with improved survivability are highlighted. Overall, this review provides insights into formulations and drying technologies required to supplement viable and stable probiotics into functional foods, ensuring the retention of their health benefits upon consumption.

Development and evaluation of anti-reflux functional-oral suspension raft composed of sodium alginate-mung bean protein complex

This study aimed to develop a sodium alginate (Na alginate) and mung bean protein (MBP) raft complex to improve gastric reflux symptoms. Na alginate and MBP complexes with different ratios (1:1, 2:1, and 3:1, respectively) were used for raft formulations through a wet Maillard reaction. Structural properties of raft strength, reflux resistance, intrinsic fluorescence emission spectroscopy, and Fourier transform infrared spectroscopy (FTIR) were investigated for rafts. The suspension 1:1 Na alginate/MBP with 0 h Maillard reaction time exhibited the lowest sedimentation volume among the suspensions. In contrast, 3:1 Na alginate/MBP with 6 h Maillard reaction time showed the highest sedimentation volume. Based on the results, the 3:1 Na alginate/MBP rafts had the best results, and the results were within acceptable limits. Functional properties, including antioxidant properties, the Helicobacter pylori inhibition assay, the pancreatic lipase inhibition assay, and angiotensin-converting enzyme (ACE) inhibition, were investigated for rafts. The Na alginate/MBP raft has similar characteristics to Gaviscon syrup and can be used for obesity, Helicobacter pylori infection, high blood pressure, and gastric reflux.

Current and emerging applications of carrageenan in the food industry

Carrageenan, a polysaccharide derived from red algae, has a long history of use as a food additive in food. Carrageenan comes in three classes, κ-, ι-, and λ-carrageenan, with different properties attributed to their organosulfate substitution levels, and their interactions with other food components give rise to properties such as water holding, thickening, gelling, and stabilizing. Over the years, carrageenan has been used in wide variety of food products such as meat, dairy, and flour-based products, and their mechanisms and functions in these matrices have also been studied. With the emergence of novel food technologies, carrageenan's potential applications have been extensively explored alongside, including encapsulation, edible films/coatings, plant-based analogs, and 3D/4D printing. As the food technology evolves, the required functions of food ingredients have changed, and carrageenan is being investigated for its role in these new areas. However, there are many similarities in the use of carrageenan in both classic and emerging applications, and understanding the underlying principles of carrageenan will lead to a proper use of carrageenan in emerging food products. This review focuses on the potential of carrageenan as a food ingredient in these emerging technologies mainly based on papers published within the past five years, highlighting its functions and applications to better understand its role in food products.

Improved Viability of Probiotics via Microencapsulation in Whey-Protein-Isolate-Octenyl-Succinic-Anhydride-Starch-Complex Coacervates

The aim of this study was to microencapsulate probiotic bacteria (Lactobacillus acidophilus 11073) using whey-protein-isolate (WPI)-octenyl-succinic-anhydride-starch (OSA-starch)-complex coacervates and to investigate the effects on probiotic bacterial viability during spray drying, simulated gastrointestinal digestion, thermal treatment and long-term storage. The optimum mixing ratio and pH for the preparation of WPI-OSA-starch-complex coacervates were determined to be 2:1 and 4.0, respectively. The combination of WPI and OSA starch under these conditions produced microcapsules with smoother surfaces and more compact structures than WPI-OSA starch alone, due to the electrostatic attraction between WPI and OSA starch. As a result, WPI-OSA-starch microcapsules showed significantly (p < 0.05) higher viability (95.94 ± 1.64%) after spray drying and significantly (p < 0.05) better protection during simulated gastrointestinal digestion, heating (65 °C/30 min and 75 °C/10 min) and storage (4/25 °C for 12 weeks) than WPI-OSA-starch microcapsules. These results demonstrated that WPI-OSA-starch-complex coacervates have excellent potential as a novel wall material for probiotic microencapsulation.

Co-encapsulation of probiotics with acylglycerols in gelatin-gum arabic complex coacervates: Stability evaluation under adverse conditions

Co-encapsulation of acylglycerols and probiotics may improve the resistance of probiotics to adverse conditions. In this study, three probiotic microcapsule models were constructed using gelatin (GE)-gum arabic (GA) complex coacervate as wall material: microcapsules containing only probiotics (GE-GA), microcapsules containing triacylglycerol (TAG) oil and probiotics (GE-T-GA) and microcapsules containing diacylglycerol (DAG) oil and probiotics (GE-D-GA). The protective effects of three microcapsules on probiotic cells under environmental stresses (freeze-drying, heat treatment, simulated digestive fluid and storage) were evaluated. The results of cell membrane fatty acid composition and Fourier transform infrared (FTIR) spectroscopy revealed that GE-D-GA could improve the fluidity of cell membrane, maintain the stability of protein and nucleic acid structure, and decrease the damage of cell membrane. These characteristics supported the high freeze-dried survival rate (96.24 %) of GE-D-GA. Furthermore, regardless of thermotolerance or storage, GE-D-GA showed the best cell viability retention. More importantly, GE-D-GA provided the best protection for probiotics under simulated gastrointestinal conditions, as the presence of DAG reduced cell damage during freeze-drying and the degree of contact between probiotics and digestive fluids. Therefore, co-microencapsulation of DAG oil and probiotics is a promising strategy to resist adverse conditions.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Microencapsulation and Application of Probiotic Bacteria Lactiplantibacillus plantarum 299v Strain

Microencapsulation is an up-and-coming technology for maintaining the viability of probiotics. However, the effect of core-to-wall ratios and ratios of polysaccharides on the protection of the Lactiplantibacillus plantarum 299v strain has not been deeply discussed. Lyophilization of the Lp. plantarum 299v strain was conducted, and different core-to-wall ratios and ratios of maltodextrin (MD) and resistant starch (RS) were applied. Results demonstrated that the content of MD and RS had an influence on the yield and bulk density in both core-to-wall ratios (1:1 and 1:1.5). In addition, samples coated with a core-to-wall ratio of 1:1.5 had significantly higher viability than those coated with a core-to-wall ratio of 1:1. Moreover, samples coated with core-to-wall ratios of 1:1 and MD:RS 1:1, as well as core-to-wall ratios of 1:1.5 and MD:RS 3:1, had the highest cell number after simulated gastric fluid and simulated intestinal fluid testing, respectively. Furthermore, the optimal formulation for the application of microencapsulated Lp. plantarum 299v in apple juice (serving as a functional beverage) is listed as follows: core-to-wall ratios of 1:1 and MD:RS 1:1, with the fortification method, and stored at 4 °C. After 11 weeks of storage, the cell count was 8.28 log (CFU/mL). This study provided a strategy for Lp. plantarum 299v to achieve high viability in long-term storage and provides an application in functional apple beverages.

Effect of ultrasonic cavitation on the formation of soy protein isolate - rice starch complexes, and the characterization and prediction of interaction sites using molecular techniques

Protein-carbohydrate interactions occur naturally in glycoproteins which are highly stable in nature and are involved in various food complexes and can enhance the quality and functional properties of foods. In the current study, we characterized the protein-carbohydrate complex formed between commercial soy protein isolate and rice starch using different treatments namely heat treatment alone, ultrasound treatment alone, combination of ultrasound and heat treatment and mixing alone. The structural data obtained using circular dichroism indicated that during the complex formation, the α-helix values were reduced by a maximum of 67% compared to soy protein isolate alone. The crystalline nature of the complexes formed by ultrasound treatment preserved the techno-functional properties as compared to complexes formed by heat treatments. The FTIR analysis of the complexes formed indicated the formation of glycosidic bond. Molecular docking analysis revealed the interaction between the complexes occurred due to hydrogen bonds which make the proteins more stable in nature thus enhancing their denaturation temperature. Glutamine, Proline and Arginine present in the D subunit of 7S 3AUP interacts with the starch molecule. The obtained results suggest that sonication combined with heat treatment led to higher interaction between the soy proteins isolate and rice starch.

Gellan gum conjugation with soy protein via Maillard-driven molecular interactions and subsequent clustering lead to conjugates with tuned technological functionality

•

Soy protein isolate (SPI) was conjugated to low acyl gellan gum (LAGG).

•

Conjugate formation was confirmed by glycation degree (DG) and structural changes.

•

SPI-LAGG conjugates were classified into low, medium, and high DG clusters.

•

A low DG was enough to enhance the techno-functional properties of SPI.

Soy proteins are frequently used in the food industry; however, they have rigid and compact structure with relatively poor interfacial properties and solubility. This study was therefore aimed to modify techno-functional characteristics of soy protein isolate (SPI; 0.1% w/v) by conjugating to low acyl gellan gum (LAGG; 0.1, 0.2, and 0.3% w/v), through the Maillard reaction (at 90 °C for 90 min). The SPI-LAGG conjugates were confirmed by changes in pH, glycation degree (DG; up to 48%), Fourier transform infrared spectroscopy, and sodium dodecyl sulphate polyacrylamide electrophoresis. The conjugates were then classified into three clusters of low, medium, and high DG, via K-means clustering method. The low DG conjugate had lower surface hydrophobicity and foaming capacity, and higher thermal stability, solubility, emulsifying properties, foam stability, and antioxidant activity compared to the other clusters. This indicated that a low DG is required to enhance the functional properties of proteins.

Bifidobacterium spp. as functional foods: A review of current status, challenges, and strategies

Members of Bifidobacterium are among the first microbes to colonize the human intestine naturally, their abundance and diversity in the colon are closely related to host health. Recently, the gut microbiota has been gradually proven to be crucial mediators of various metabolic processes between the external environment and the host. Therefore, the health-promoting benefits of Bifidobacterium spp. and their applications in food have gradually been widely concerned. The main purpose of this review is to comprehensively introduce general features, colonization methods, and safety of Bifidobacterium spp. in the human gut, highlighting its health benefits and industrial applications. On this basis, the existing limitations and scope for future research are also discussed. Bifidobacteria have beneficial effects on the host's digestive system, immune system, and nervous system. However, the first prerequisite for functioning is to have enough live bacteria before consumption and successfully colonize the colon after ingestion. At present, strain breeding, optimization (e.g., selecting acid and bile resistant strains, adaptive evolution, high cell density culture), and external protection technology (e.g., microencapsulation and protectants) are the main strategies to address these challenges in food application.

Microencapsulation of Lactobacillus plantarum by spray drying: Protective effects during simulated food processing, gastrointestinal conditions, and in kefir

Probiotics are incorporated into food products because of numerous favorable effects on human health. The viability of probiotics is often affected by unfavorable interference during processing. The encapsulation can provide protection to probiotics during mechanical processing, storage, and gastrointestinal digestion. This study aimed to evaluate the protective effect of whey protein isolate (WPI) and dextran (DX) conjugates for Lactobacillus plantarum. The WPI-DX conjugate was prepared by Maillard-based glycation and confirmed by gel electrophoresis. Extending the heating time from 1 to 5 h decreased the content of tryptophan residues and increased the amide I and amide II bands. The enhanced protective ability of Maillard reaction products (MRPs) for L. plantarum was observed under conditions of stress (pH, heat, and salt) and in vitro digestion. In situ viability tests showed that encapsulation improved the survival of bacteria in kefir during 15 days of storage at 4 °C. Overall, our results provide valuable information for the development of functional probiotic food products.

Structural and inflammatory characteristics of Maillard reaction products from litchi thaumatin-like protein and fructose

The structural characteristics and inflammatory activity of Maillard reaction products (MRPs) from fructose (Fru) and litchi thaumatin-like protein (LcTLP) with a pro-inflammatory activity were investigated. The structural changes of LcTLP-Fru MRPs were divided into two stages during the Maillard reaction. In 0-6 h, the unfolding and degradation of the LcTLP were dominant, resulting in a looser structure; the increase of β-sheets was 13.02%; the decrease of α-helices was 9.21%; and both the molecular weight and gyration radius R_g decreased. After 6 h, the enhanced glycosylation caused the molecular weight to increase, while R_g remained low, implying that the molecular structure became more compact. In addition, LcTLP-Fru MRPs reduced the inflammation response by significantly reducing the gene and protein expressions of tumor necrosis factor-α, interleukin-1β, and interleukin-6 compared with the LcTLP group in RAW264.7 macrophages. The findings provided a theoretical foundation for addressing the inflammatory response caused by litchi products consumption.

Novel Antioxidative Wall Materials for Lactobacillus casei Microencapsulation via the Maillard Reaction between the Soy Protein Isolate and Prebiotic Oligosaccharides

In this study, three kinds of Maillard reaction products (MRPs) have been, for the first time, successfully prepared by conjugating soy protein isolate (SPI) with isomaltooligosaccharide, xylooligosaccharide, or galactooligosaccharide at 80 °C for 30 or 60 min and applied for the construction of Lactobacillus casei (L. casei) microcapsules. The results showed that MRPs exhibited enhanced antioxidative activities compared with their physically mixed counterparts. The digested MRPs displayed excellent resistance to pathogenic bacteria and promoted the growth of L. casei. Moreover, MRP-encapsulated L. casei showed a higher survival rate than free L. casei under tested adverse conditions including heat treatment, storage, and mechanical forces. Under simulated digestion conditions, the viability of L. casei decreased from 8.8 log cfu/mL to 1.6 log cfu/mL, while that of MRP-encapsulated L. casei was maintained at 7.4 log cfu/mL. Thus, MRP-based SPI-oligosaccharide conjugates exhibited great potential for microencapsulation of probiotics.

Physicochemical and Functional Characterization of Newly Designed Biopolymeric-Based Encapsulates with Probiotic Culture and Charantin

The identification of novel sources of synbiotic agents with desirable functionality is an emerging concept. In the present study, novel encapsulates containing probiotic L. acidophilus LA-05^® (LA) and Charantin (CT) were produced by freeze-drying technique using pure Whey Protein Isolate (WPI), pure Maltodextrin (MD), and their combination (WPI + MD) in 1:1 core ratio, respectively. The obtained microparticles, namely WPI + LA + CT, MD + LA + CT, and WPI + MD + LA + CT were tested for their physicochemical properties. Among all formulations, combined carriers (WPI + MD) exhibited the highest encapsulation yields for LA (98%) and CT (75%). Microparticles showed a mean d (4, 3) ranging from 50.393 ± 1.26 to 68.412 ± 3.22 μm. The Scanning Electron Microscopy revealed uniformly amorphous and glass-like structures, with a noticeably reduced porosity when materials were combined. In addition, Fourier Transform Infrared spectroscopy highlighted the formation of strong hydrogen bonds supporting the interactions between the carrier materials (WPI and MD) and CT. In addition, the thermal stability of the combined WPI + MD was superior to that of pure WPI and pure MD, as depicted by the Thermogravimetric and Differential Scanning Calorimetry analysis. More interestingly, co-encapsulation with CT enhanced LA viability (8.91 ± 0.3 log CFU/g) and Cells Surface Hydrophobicity (82%) in vitro, in a prebiotic-like manner. Correspondingly, CT content was heightened when co-encapsulated with LA. Besides, WPI + MD + LA + CT microparticles exhibited higher antioxidant activity (79%), α-amylase inhibitory activity (83%), and lipase inhibitory activity (68%) than single carrier ones. Furthermore, LA viable count (7.95 ± 0.1 log CFU/g) and CT content (78%) were the highest in the blended carrier materials after 30 days of storage at 4 °C. Synbiotic microparticle WPI + MD + LA + CT represents an effective and promising approach for the co-delivery of probiotic culture and bioactive compounds in the digestive tract, with enhanced functionality and storage properties.

Utilization of diverse protein sources for the development of protein-based nanostructures as bioactive carrier systems: A review of recent research findings (2010-2021)

Consumer awareness of the relationship between health and nutrition has caused a substantial increase in the demand for nutraceuticals and functional foods containing bioactive compounds (BACs) with potential health benefits. However, the direct incorporation of many BACs into commercial food and beverage products is challenging because of their poor matrix compatibility, chemical instability, low bioavailability, or adverse impact on food quality. Advanced encapsulation technologies are therefore being employed to overcome these problems. In this article, we focus on the utilization of plant and animal derived proteins to fabricate micro and nano-particles that can be used for the oral delivery of BACs such as omega-3 oils, vitamins and nutraceuticals. This review comprehensively discusses different methods being implemented for fabrications of protein-based delivery vehicles, types of proteins used, and their compatibility for the purpose. Finally, some of the challenges and limitations of different protein matrices for encapsulation of BACs are deliberated upon. Various approaches have been developed for the fabrication of protein-based microparticles and nanoparticles, including injection-gelation, controlled denaturation, and antisolvent precipitation methods. These methods can be used to construct particle-based delivery systems with different compositions, sizes, surface hydrophobicity, and electrical characteristics, thereby enabling them to be used in a wide range of applications.

Fabrication of fish gelatin / sodium alginate double network gels for encapsulation of probiotics

BACKGROUND

To improve the environmental resistance of probiotics, and particularly their survival in the gastrointestinal environment, a fish gelatin (FG) / sodium alginate (SA) double network gelation (FSDN) was developed to encapsulate them. Thermal treatment and calcium ion inducement were adopted to fabricate fish gelatin and sodium alginate gels. It was feasible to scale up this process. The effects of FG concentration (0-60 g/L) on FSDN properties, including morphology, water-holding capacity, and encapsulation efficiency were evaluated.

RESULTS

The results indicated that the addition of FG could improve the transparency, rehydration, and water-holding capacity of FSDN. Scanning electronic microscope (SEM) images revealed that FSDN had a denser and more complete structure than SA. Encapsulation efficiency improved from 15.85% to 91.91% as the FG concentration ranged from 0 to 50 g/L. Bifidobacterium longum embedded by FSDN showed better thermal stability than when it was free. Compared with bare probiotics (1.7%), the encapsulated ones exhibited higher viability (above 15%) in simulated gastric fluid.

CONCLUSION

In conclusion, interpenetrating FSDN is an effective barrier constituent and could achieve the targeted delivery of probiotics. It is a potential new delivery carrier for the oral administration of probiotics. © 2021 Society of Chemical Industry.

Modification of soy protein isolate by Maillard reaction and its application in microencapsulation of Limosilactobacillusreuteri

Limosilactobacillusreuteri was encapsulated using Maillard-reaction-products (MRPs) of soy protein isolate (SPI) and α-lactose monohydrate by freeze-drying. The mixed solution of SPI and α-lactose monohydrate was placed in a water bath at 89°C for 160 min for Maillard reaction, and then freeze-dried to obtain MRPs. The effects of Maillard reaction on functional characteristics of MRPs and the properties of MRPs-microcapsules were studied. SDS-PAGE indicated that SPI subunit reacted with lactose to form a polymer, and the band of MRPs disappeared around the molecular weights of 33, 40, 63, and 100 kDa. Compared with SPI, the emulsion stability, emulsion activity, foaming capacity, foam stability, and gel strength of MRPs were increased by 259%, 55.71%, 82.32%, 58.53%, and 3266%, respectively. The results of Fourier transform infrared spectroscopy, circular dichroism spectroscopy, and scanning electron micrographs confirmed that the protein structure also changed significantly. Then, MRPs were used as wall material to prepare L. reuteri microcapsules. Physical properties and viable counts of L. reuteri during the simulated gastrointestinal digestion and storage period were determined. The particle size of MRPs-microcapsules (68 μm) was smaller than that of SPI-microcapsules (91 μm). The viable counts of L. reuteri in simulated gastrointestinal digestion and after storage for 30 days were improved. The modifications with Maillard reaction can improve emulsification, foaming, and gel strength of SPI, and MRPs could be used as a new type of wall material in the production of L. reuteri microcapsules.

Nanocomplexes of curcumin and glycated bovine serum albumin: The formation mechanism and effect of glycation on their physicochemical properties

Bovine serum albumin (BSA) and BSA-glucose conjugates (GBSAⅠ and GBSAⅠI) with different extent of glycation were complexed with curcumin (CUR). The formation mechanism of BSA/GBSA-CUR complexes and the effect of glycation on their physicochemical properties were investigated. Fluorescence quenching and FTIR analysis indicated that the BSA/GBSA-CUR nanocomplexes were formed mainly by hydrophobic interactions. XRD analysis demonstrated that CUR was present in an amorphous state in the nanocomplexes. BSA with a greater extent of glycation (BSA < GBSAⅠ<GBSAⅠI) displayed a higher binding affinity for CUR. The highest CUR encapsulation efficiency (86.77%) and loading capacity (7.81 mg/g) were obtained in the GBSAⅠI-CUR nanocomplex. The zeta-potential varied from -17.45 to -27.65 mV, depending on the extent of glycation. Furthermore, the physicochemical stability of BSA/GBSA-CUR nanocomplexes increased with the increasing extent of glycation of BSA. Thus, the obtained GBSAⅠI have the potential to become new delivery carriers for encapsulating hydrophobic food components.

Entrapment of natural compounds in spray-dried and heat-dried iota-carrageenan matrices as functional ingredients in surimi gels

Two drying methods (spray drying and heat drying) were used to entrap various natural compounds within a matrix of iota-carrageenan. The natural compounds were, namely, collagen hydrolysate (CH), pomegranate polyphenolic extract (PP) and shrimp lipid extract (SL). The resulting dry powders were compared in terms of water solubility, entrapment efficiency, hydrodynamic particle properties, ζ potential and antioxidant properties (ABTS radical scavenging capacity, ferric ion reducing power and Folin-reactive substances). Dry powders and plain compounds were incorporated into squid surimi gels, and after in vitro simulated gastrointestinal digestion (sGID), the residual antioxidant and angiotensin-converting enzyme (ACE)-inhibitory activities were evaluated. All powders showed antioxidant properties, electronegative ζ potential and great entrapment efficiency after rehydration (ranging from ∼70 to 97%). The heat-dried powders were composed of microparticles ranging from 177 to 380 μm resulting in low water solubility (21.6-36.1%), while the average particle size and solubility values of spray-dried preparations were 2.9-13.2 μm and >86%, respectively. In contrast to the plain compounds, the addition of any of the microparticle dried preparations allowed obtaining well-conformed surimi gels. The ACE-inhibitory capacity of the surimi gels after sGID was increased by the addition of any of the compounds studied, but to a lesser extent by their entrapment forms (except with the entrapped SL). The antioxidant activities of gels with the entrapped compounds were even lower than those of gels without bioactives in some cases. In conclusion, the addition of dried microparticles did not increase the biological activity as compared to the plain compounds; however, they were beneficial to ensure adequate gel consistency.

Maillard conjugates of whey protein isolate-xylooligosaccharides for the microencapsulation of Lactobacillus rhamnosus: protective effects and stability during spray drying, storage and gastrointestinal digestion

The Maillard reaction products (MRPs) of whey protein isolate (WPI) and xylooligosaccharides (XOS) were prepared by a moist heat method for use as protectants to encapsulate Lactobacillus rhamnosus via spray drying. The protective effects of MRPs on bacterial cells during drying, storage, and in vitro digestion were explored. FTIR results indicated that MRPs were successfully prepared. All MRPs showed good thermo-protective effect on the bacteria, and the survival ratio achieved with 1 : 2 XOS-WPI as a wall material reached 99.83 ± 8.44%, which was around 2 times as high as that of the WPI wall material and 1.5 times as high as that of the 1 : 2 XOS-WPI mixture. The dried lactobacilli showed similar growth curves to the fresh culture. After 10 weeks of storage at 4 °C, the decrease in the bacterial activity was less than 1 log CFU g-1 for all types of microcapsules, while the microcapsules composed of all MRPs had better storage stability. MRPs improved the stability of microcapsules during in vitro digestion. The number of viable bacteria in 1 : 2 XOS-WPI MRPs microcapsules was maintained at 4.09 ± 0.59 × 109 CFU g-1 after simulated gastrointestinal digestion for 4 hours, which only decreased by 0.20 log CFU g-1.

Improvements of plant protein functionalities by Maillard conjugation and Maillard reaction products

Plant-derived protein research has gained attention in recent years due to the rise of health concerns, allergenicity, trends toward vegan diet, food safety, and sustainability; but the lower techno-functional attributes of plant proteins compared to those of animals still remain a challenge for their utilization. Maillard conjugation is a protein side-chain modification reaction which is spontaneous, and do not require additional chemical additive to initiate the reaction. The glycoconjugates formed during the reaction significantly improves the thermal stability and pH sensitivity of proteins. The modification of plant-derived protein using Maillard conjugation requires a comprehensive understanding of the influence of process conditions on the conjugation process. These factors can be used to establish a correlation with different functional and bioactive characteristics, to potentially adapt this approach for selective functionality enhancement and nutraceutical development. This review covers recent advances in plant-derived protein modification using Maillard conjugation, including different pretreatments to modify the functionality and bioactivity of plant proteins and their potential uses in practice. An overview of different properties of conjugates and MRPs, including food safety aspects, is given.

Glycation of Plant Proteins Via Maillard Reaction: Reaction Chemistry, Technofunctional Properties, and Potential Food Application

Plant proteins are being considered to become the most important protein source of the future, and to do so, they must be able to replace the animal-derived proteins currently in use as techno-functional food ingredients. This poses challenges because plant proteins are oftentimes storage proteins with a high molecular weight and low water solubility. One promising approach to overcome these limitations is the glycation of plant proteins. The covalent bonding between the proteins and different carbohydrates created via the initial stage of the Maillard reaction can improve the techno-functional characteristics of these proteins without the involvement of potentially toxic chemicals. However, compared to studies with animal-derived proteins, glycation studies on plant proteins are currently still underrepresented in literature. This review provides an overview of the existing studies on the glycation of the major groups of plant proteins with different carbohydrates using different preparation methods. Emphasis is put on the reaction conditions used for glycation as well as the modifications to physicochemical properties and techno-functionality. Different applications of these glycated plant proteins in emulsions, foams, films, and encapsulation systems are introduced. Another focus lies on the reaction chemistry of the Maillard reaction and ways to harness it for controlled glycation and to limit the formation of undesired advanced glycation products. Finally, challenges related to the controlled glycation of plant proteins to improve their properties are discussed.

Transformation between 2-Threityl-thiazolidine-4-carboxylic Acid and Xylose-Cysteine Amadori Rearrangement Product Regulated by pH Adjustment during High-Temperature Instantaneous Dehydration

2-Threityl-thiazolidine-4-carboxylic acid (TTCA) was found to be the predominant product rather than the Amadori rearrangement product (ARP) during the formation of xylose-cysteine-derived (Xyl-Cys-derived) Maillard reaction intermediates (MRIs) through a thermal reaction coupled with vacuum dehydration. To regulate the existence forms of Xyl-Cys-derived MRIs, an effective method carried out by pH adjustment during high-temperature instantaneous dehydration through spray-drying was proposed in this research to promote the conversion from TTCA to ARP. The increased inlet air temperature of spray-drying could properly facilitate the shift of chemical equilibrium between the MRIs and promote the transformation from TTCA to ARP while raising the total yield of TA (TTCA + ARP). The conversion to ARP was increased to 20.83% at 190 °C of hot blast compared to the product without spray-drying (6.03%). The conversion from TTCA to ARP was further facilitated in the pH range of 7.5-9.5. When the pH of the aqueous reactants was adjusted to 9.5, the equilibrium conversion to ARP was improved to 47.23% after spray-drying, which accounted for 59.48% of the TA formation. Accordingly, MRIs with different TTCA/ARP proportions could be selectively obtained by pH adjustment of the stock solution during high-temperature instantaneous dehydration of spray-drying.