Lime peel pectin integrated with coconut water and lime peel extract as a new bioactive film sachet to retard soybean oil oxidation

Developing active and intelligent biodegradable packaging from food waste and byproducts: A review of sources, properties, film production methods, and their application in food preservation

Food waste and byproducts (FWBP) are a global issue impacting economies, resources, and health. Recycling and utilizing these wastes, due to processing and economic constraints, face various challenges. However, valuable components in food waste inspire efficient solutions like active intelligent packaging. Though research on this is booming, its material selectivity, effectiveness, and commercial viability require further analysis. This paper categorizes FWBP and explores their potential for producing packaging from both animal and plant perspectives. In addition, the preparation/fabrication methods of these films/coatings have also been summarized comprehensively, focusing on the advantages and disadvantages of these methods and their commercial adaptability. Finally, the functions of these films/coatings and their ultimate performance in protecting food (meat, dairy products, fruits, and vegetables) are also reviewed systematically. FWBP provide a variety of methods for the application of edible films, including being made into coatings, films, and fibers for food preservation, or extracting active substances directly or indirectly from them (in the form of encapsulation) and adding them to packaging to endow them with functions such as barrier, antibacterial, antioxidant, and pH response. In addition, the casting method is the most commonly used method for producing edible films, but more film production methods (extrusion, electrospinning, 3D printing) need to be tried to make up for the shortcomings of the current methods. Finally, researchers need to conduct more in-depth research on various active compounds from FWBP to achieve better application effects and commercial adaptability.

Apple pectin-based active films to preserve oil: Effects of naturally branched phytoglycogen-curcumin host

Pectin has excellent film-forming properties, but its functional properties need to be enhanced. Therefore, we constructed naturally branched phytoglycogen (PG) nanoparticles to solubilize curcumin (CCM) and further enhance the properties of apple pectin-based active films. The size of the PG spherical particles ranged from 30 to 100 nm with some aggregates. The branch density of the PG was 6.02 %. These PG nanoparticles increased the solubility of CCM nearly 1742-fold and a nanosized phytoglycogen-curcumin (PG-CCM) host was formed via hydrogen bonding and hydrophobic interaction. This host promoted the formation of pectin-based films with a dense structure and increased their tensile strength to 23.51 MPa. The coefficient to water vapor permeability, oxygen permeability and carbon dioxide permeability were all decreased indicating their barrier performance were improved. Among them, the oxygen permeability coefficient decreased most, from 1.14 × 10-7 g·m-1·s-1 to 0.8 × 10-7 g·m-1·s-1. Also, the transmittance of the active film at 280 nm and 660 nm decreased to 0.65 % and 72.10 %. Antioxidant and antibacterial properties were significantly enhanced (P < 0.05). And the results showed this film was an excellent oil packaging material. The active film incorporating PG-CCM host can replace heat-sealed plastic bags/pouch made from polyethylene and polypropylene synthetic plastics, and solve the problem that plastic packaging is difficult to degrade and cannot be squeezed clean. This provides a new conceptual framework for developing pectin-based active films by incorporating of PG and CCM.

Differences in physicochemical properties of pectin extracted from pomelo peel with different extraction techniques

In order to obtain high yield pomelo peel pectin with better physicochemical properties, four pectin extraction methods, including hot acid extraction (HAE), microwave-assisted extraction (MAE), ultrasound-assisted extraction, and enzymatic assisted extraction (EAE) were compared. MAE led to the highest pectin yield (20.43%), and the lowest pectin recovery was found for EAE (11.94%). The physicochemical properties of pomelo peel pectin obtained by different methods were also significantly different. Pectin samples obtained by MAE had the highest methoxyl content (8.35%), galacturonic acid content (71.36%), and showed a higher apparent viscosity, thermal and emulsion stability. The pectin extracted by EAE showed the highest total phenolic content (12.86%) and lowest particle size (843.69 nm), showing higher DPPH and ABTS scavenging activities than other extract methods. The pectin extracted by HAE had the highest particle size (966.12 nm) and degree of esterification (55.67%). However, Fourier-transform infrared spectroscopy showed that no significant difference occurred among the different methods in the chemical structure of the extracted pectin. This study provides a theoretical basis for the industrial production of pomelo peel pectin.

Characterization of the Mechanical, Biodegradation, and Morphological Properties of NBR/Biopolymer Blend, Integrated with a Risk Evaluation

Biopolymer blends have attracted considerable attention in industrial applications due to their notable mechanical properties and biodegradability. This work delves into the innovative combination of butadiene-acrylonitrile (referred to as NBR) with a pectin-based biopolymer (NGP) at a 90:10 mass ratio through a detailed analysis employing mechanical characterization, Fourier transform infrared (FTIR) analysis, thermogravimetric analysis (TGA), and morphology studies using SEM. Additionally, biopolymer's biodegradability under aerobic and anaerobic conditions is tested. The study's findings underscore the superior tensile strength and elongation at break of the NGP/NBR blend in comparison to pure NBR, while also exhibiting a decrease in puncture resistance due to imperfect bonds at the particle-matrix interfaces, necessitating the use of a compatibilizer. In anaerobic conditions, evaluation of biodegradable properties reveals 2% and 12% biodegradability in NBR and NGP/NBR blend, respectively. The degradation properties were also aligned with TGA results highlighting a lower decomposition temperature for NGP. Additionally, this research integrates the application of a conditional value-at-risk (CVaR)-based analysis of the blend's tensile properties to evaluate the uncertainty impact in the experiment. Under risk, a significant enhancement in the tensile performance (by 80%) of the NGP/NBR blend was shown compared to pure NBR. Ultimately, the study shows that adding pectin to the NBR compound amplifies the overall performance of the biopolymer significantly under select criteria.

Tuning the mechanical properties of pectin films with polyphenol-rich plant extracts

The mechanical properties of pectin films enhanced with polyphenol-rich fruit extracts were investigated. The scavenging and reducing activity of plant extracts incorporated into the pectin films were determined using bench assays, and their antioxidant activity was correlated with a high presence of polyphenols, which were predominantly comprised of flavonoids and anthocyanins. The pectin films generated from the extracts exhibited a range of mechanical properties; tensile strength (4.99 MPa - 6.91 MPa), elongation at break (45.8 % - 52.3 %), and stiffness (1835 g mm-1 - 2765 g mm-1). To investigate the underlying relationships between plant extract composition and mechanical properties, Projection to Latent Structures (PLS) models were developed. The PLS models revealed that extracts containing high sugar and polyphenol content increase the tensile strength and moisture content of films. The elongation at break of the films was improved or diminished depending on the profile of sugar, acids, and polyphenols in the fruit extracts. Furthermore, the structures and concentration of anthocyanins and flavonoids were identified to strongly influenced the elongation at break differences. By modifying the concentration of sugars, organic acids, and polyphenols, the mechanical properties of pectin-based films can be tuned for tailored applications as food packaging materials.

Efficacy of Chitosan, Pectin and Xanthan as Cold Gelling Agents in Emulsion Gels Stabilized with Legume Proteins to Be Used as Pork Backfat Replacers in Beef Burgers

This study aimed to develop stable emulsion gels enriched in polyunsaturated fatty acids, formulated with a mixture of olive (75%) and linseed (25%) oils, by incorporating two different stabilizers-pea and soy protein isolates-and three different cold gelling agents-chitosan, pectin and xanthan-to be used as pork backfat replacers in beef burgers. The color, pH, stability and textural properties of the emulsion gels were analyzed as affected by cold storage (4 °C, 7 days). Proximate composition, fatty acid content, technological and sensory properties were determined after burger processing. Meanwhile, color, pH, textural parameters and lipid oxidation were monitored in burgers at 0, 5 and 10 days of storage at 4 °C. A reduction of the fat content between 21.49% and 39.26% was achieved in the reformulated burgers as compared with the control, while the n-6/n-3 polyunsaturated fatty acid ratio decreased from 5.11 to 0.62. The highest moisture and fat retention were found in reformulated burgers made with xanthan, both with pea and soy proteins; however, their textural properties were negatively affected. The reformulated burgers made with chitosan were rated highest for sensory attributes and overall acceptability, not significantly different from the controls.

Recent advances in edible coatings and their application in food packaging

The food packaging industries are facing the challenge of food waste generation. This can be addressed through the use of edible coating materials. These coatings aid in extending the shelf life of food products, reducing waste. The key components of these coatings include food-grade binding agents, solvents, and fillers. The integration of polysaccharide, protein, lipids, bioactive and composite-based materials with edible coating matrix aids to combat substantial post-harvest loss of highly perishable commodities and elevates the quality of minimally processed food. The aim of this review is to introduce the concept of edible coatings and discuss the different coating materials used in the food industry, along with their properties. Additionally, this review aims to classify the coating types based on characteristic features and explore their application in various food processing industries. This review provides a comprehensive overview of edible coatings, including the integration of polysaccharides, proteins, lipids, bioactive, and composite-based materials into the coating matrix. This review also addresses the significant post-harvest loss of highly perishable commodities and emphasizes the enhancement of quality in minimally processed food. Furthermore, the antimicrobial, anti-corrosive, and edible characteristics are highlighted, showcasing their potential applications in different food packaging industries. Moreover, it also discusses the challenges, safety and regulatory aspects, current trends, and future perspectives, aiming to shed light on the commercialization and future investigation of edible coatings.

Xanthoceras sorbifolia Husk Extract Incorporation for the Improvement in Physical and Antioxidant Properties of Soy Protein Isolate Films

With the increasing awareness of ecological and environmental protection, the research on eco-friendly materials has experienced a considerable increase. The objective of our study was to explore a novel soy protein isolate (SPI) film functionalized with antioxidants extracted from Xanthoceras sorbifolia husk (XSHE) as bio-based active packaging films. The films were evaluated in light of their structure, physical machinery, and antioxidant performance using advanced characterization techniques. The FTIR and microscopy results revealed the hydrogen-bond interaction between the SPI and XSHE and their good compatibility, which contributed to the improvement in various properties of the composite films, such as tensile strength (TS), UV blocking, and the water barrier property. As the XSHE content increased to 5%, the TS of the films dramatically increased up to 7.37 MPa with 47.7% and the water vapor permeability decreased to 1.13 × 10-10 g m m-2 s-1 Pa-1 with 22.1%. Meanwhile, the introduction of XSHE caused further improvement in the antioxidant capacity of films, and the release of active agents from films was faster and higher in 10% ethanol than it was in a 50% ethanol food simulant. Overall, SPI-based films functionalized with XSHE demonstrated promising potential applications in food packaging.

Antioxidant activity and semi-solid emulsification of a polysaccharide from coffee cherry peel

In order to further improve the economic benefits of the coffee industry chain, we carried out the following systematic research on processing by-products. In this research, the obtained coffee cherry peel polysaccharide (CCP) which was removed from the coffee cherry peel by hot acid method had a galacturonic acid content of 20.50 % and a molecular weight of 3.05 kg/mol. According to the results of monosaccharide analysis, Fourier transform infrared spectroscopy, molecular weight distribution, and thermal analysis, CCP was a typical high methoxy polysaccharide. In vitro antioxidant results showed that CCP had better antioxidant capacity than commercial citrus polysaccharide (APC). When it came to emulsification performance, the water-oil bonding ability and disturbance resistance to the fluid of CCP were also significantly higher than that of APC. Specially, we found that 0.50 % (wt%) CCP could form a solid-liquid gel with very high plasticity at low oil phase fraction. In conclusion, the coffee cherry peel could be used as a natural source of a novel emulsifier, providing a promising alternative for polysaccharide in the food industry.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

Recent progress in pectin extraction and their applications in developing films and coatings for sustainable food packaging: A review

Perishable foods like fruits and vegetables, meat, fish, and dairy products have short shelf-life that causes significant postharvest losses, which poses a major challenge for food supply chains. Biopolymers have been extensively studied as sustainable alternatives to synthetic plastics, and pectin is one such biopolymer that has been used for packaging and preservation of foods. Pectin is obtained from abundantly available low-cost sources such as agricultural or food processing wastes and by products. This review is a complete account of pectin extraction from agro-wastes, development of pectin-based composite films and coatings, their characterizations, and their applications in food packaging and preservation. Compared to conventional chemical extraction, supercritical water, ultrasound, and microwave assisted extractions are a few examples of modern and more efficient pectin extraction processes that generate almost no hazardous effluents, and thus, such extraction techniques are more environment friendly. Pectin-based films and coatings can be functionalized with natural active agents such as essential oils and other phytochemicals to improve their moisture barrier, antimicrobial and antioxidant properties. Application of pectin-based active films and coatings effectively improved shelf-life of fresh cut-fruits, vegetables, meat, fish, poultry, milk, and other food perishable products.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Utilization of Food Waste and By-Products in the Fabrication of Active and Intelligent Packaging for Seafood and Meat Products

Research on the utilization of food waste and by-products, such as peels, pomace, and seeds has increased in recent years. The high number of valuable compounds, such as starch, protein, and bioactive materials in waste and by-products from food manufacturing industries creates opportunities for the food packaging industry. These opportunities include the development of biodegradable plastics, functional compounds, active and intelligent packaging materials. However, the practicality, adaptability and relevance of up-scaling this lab-based research into an industrial scale are yet to be thoroughly examined. Therefore, in this review, recent research on the development of active and intelligent packaging materials, their applications on seafood and meat products, consumer acceptance, and recommendations to improve commercialization of these products were critically overviewed. This work addresses the challenges and potential in commercializing food waste and by-products for the food packaging industry. This information could be used as a guide for research on reducing food loss and waste while satisfying industrial demands.

Dragon Fruit Peel Extract Enriched-Biocomposite Wrapping Film: Characterization and Application on Coconut Milk Candy

Bio-based film is an eco-friendly alternative to petroleum-based packaging film. The effects of biocomposite wrapping film enhanced with dragon fruit peel extract (0, 2% w/v, respectively) and currently used commercial packaging film (polypropylene; PP) on coconut milk caramels during storage (30 °C, 75% RH, nine days) were studied. Both 0% and 2% DPE-enriched biocomposite films were thicker and had higher water vapor permeability and solubility than the PP film but poorer mechanical characteristics. In addition, the 2% film possessed antioxidants and antioxidant ability. A FESEM micrograph revealed the rough surface and porous path of the biocomposite films. Over the storage time, the moisture content, water activity, and springiness of the coconut milk caramel candy wrapped in the PP and all DPE-enriched biocomposite films were not significantly altered. However, the lipid oxidation as the thiobarbituric acid reactive substance (TBARS) and hardness of all coconut caramels were significantly (p < 0.05) increased during storage. Furthermore, the hardness of coconut candy covered in the control (0% DPE) biocomposite film was more pronounced on day nine of storage. However, the changes in quality characteristics of the coconut candy wrapped in each film type need to be better established. The investigating factors influencing the quality deterioration of coconut milk candy should be further identified to mitigate their effects and extend the shelf-life of the coconut candy.

The Green Era of Food Packaging: General Considerations and New Trends

Recently, academic research and industries have gained awareness about the economic, environmental, and social impacts of conventional plastic packaging and its disposal. This consciousness has oriented efforts towards more sustainable materials such as biopolymers, paving the way for the “green era” of food packaging. This review provides a schematic overview about polymers and blends of them, which are emerging as promising alternatives to conventional plastics. Focus was dedicated to biopolymers from renewable sources and their applications to produce sustainable, active packaging with antimicrobial and antioxidant properties. In particular, the incorporation of plant extracts, food-waste derivatives, and nano-sized materials to produce bio-based active packaging with enhanced technical performances was investigated. According to recent studies, bio-based active packaging enriched with natural-based compounds has the potential to replace petroleum-derived materials. Based on molecular composition, the natural compounds can diversely interact with the native structure of the packaging materials, modulating their barriers, optical and mechanical performances, and conferring them antioxidant and antimicrobial properties. Overall, the recent academic findings could lead to a breakthrough in the field of food packaging, opening the gates to a new generation of packaging solutions which will be sustainable, customised, and green.

Current Advancements in Pectin: Extraction, Properties and Multifunctional Applications

Pectin is a heterogeneous hydrocolloid present in the primary cell wall and middle lamella in all dicotyledonous plants, more commonly in the outer fruit coat or peel as compared to the inner matrix. Presently, citrus fruits and apple fruits are the main sources for commercial extraction of pectin, but ongoing research on pectin extraction from alternate fruit sources and fruit wastes from processing industries will be of great help in waste product reduction and enhancing the production of pectin. Pectin shows multifunctional applications including in the food industry, the health and pharmaceutical sector, and in packaging regimes. Pectin is commonly utilized in the food industry as an additive in foods such as jams, jellies, low calorie foods, stabilizing acidified milk products, thickener and emulsifier. Pectin is widely used in the pharmaceutical industry for the preparation of medicines that reduce blood cholesterol level and cure gastrointestinal disorders, as well as in cancer treatment. Pectin also finds use in numerous other industries, such as in the preparation of edible films and coatings, paper substitutes and foams. Due to these varied uses of pectin in different applications, there is a great necessity to explore other non-conventional sources or modify existing sources to obtain pectin with desired quality attributes to some extent by rational modifications of pectin with chemical and enzymatic treatments.

Development and characterization of a novel active and intelligent film based on pectin and betacyanins from peel waste of pitaya (Hylocereus undatus)

In the present study, peel waste of pitaya (Hylocereus spp.) was used to develop a novel active and functional film. The film was developed with a combination of the white-fleshed pitaya peel pectin (WPPP) as a biopolymer and white-fleshed pitaya peel betacyanins (WPPB) as an active constituent, respectively. Furthermore, montmorillonite (MMT), a cheap and environmental-friendly silicate material, was introduced into film matrix as a filler to reduce the moisture sensitivity of the film. The effect of the incorporation of WPPB on the properties of WPPP/MMT films was investigated. The colorimetric response of WPPP/MMT/WPPB to pH and ammonia was examined, respectively. Moreover, WPPP/MMT/WPPB-2 was employed to monitor the freshness of shrimp. The color of the film changed from redness to reddish-brown, and further to brownness, echoing the shrimp turned from fresh to spoiled. Therefore, WPPP/MMT/WPPB-2 composite films showed promise for the applications in monitoring the freshness of shrimp.

Development of Pectin and Poly(vinyl alcohol)-Based Active Packaging Enriched with Itaconic Acid and Apple Pomace-Derived Antioxidants

The production of active and biodegradable packaging materials is an emerging and efficient alternative to plastic packaging materials. By combining poly(vinyl alcohol) (PVA), pectin, and itaconic acid (IA), biodegradable and water-soluble packaging materials can be obtained that can also increase the shelf-life and quality of foodstuff. In the present study, the generated film-forming solutions were enriched with organic or phenolic extracts from apple by-products (apple pomace). These extracts possess an efficient antioxidant activity of 9.70 ± 0.08, and 78.61 ± 0.24 μM Trolox/100 g fresh weight, respectively. Furthermore, the lyophilization of these by-products increased the extract’s organic and phenolic content and the antioxidant activity to 67.45 ± 0.28 and 166.69 ± 0.47 μM Trolox/100 g fresh weight, respectively. These extracts influence the physical-chemical properties of the biofilm solutions by facilitating the polymerization process and thus positively influencing their viscosity. The resulting biofilms presented low water vapor permeability and reduced solubility in water. Adding IA and organic/phenolic compounds facilitates the resistance against intrinsic and extrinsic factors; therefore, they might be applicable in the food industry.

Encapsulation of Caffeic Acid in Carob Bean Flour and Whey Protein-Based Nanofibers via Electrospinning

The purpose of this study was to introduce caffeic acid (CA) into electrospun nanofibers made of carob flour, whey protein concentrate (WPC), and polyethylene oxide (PEO). The effects of WPC concentration (1% and 3%) and CA additions (1% and 10%) on the characteristics of solutions and nanofibers were investigated. The viscosity and electrical conductivity of the solutions were examined to determine characteristics of solutions. Scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analyzer (TGA), differential scanning calorimetry (DSC), water vapor permeability (WVP), and Fourier transform infrared (FTIR) analysis were used to characterize the nanofibers. According to the SEM results, the inclusion of CA into nanofibers resulted in thinner nanofibers. All nanofibers exhibited uniform morphology. CA was efficiently loaded into nanofibers. When CA concentrations were 1% and 10%, loading efficiencies were 76.4% and 94%, respectively. Nanofibers containing 10% CA demonstrated 92.95% antioxidant activity. The results indicate that encapsulating CA into carob flour–WPC-based nanofibers via electrospinning is a suitable method for active packaging applications.

Plasticizing effect of Apis mellifera honey on whey protein isolate films

The aims of this study were to analyze the plasticizing effect of Apis mellifera honey on the mechanical, physicochemical and optical properties of whey protein isolate (WPI) films and to compare the results collected with the plasticizing effect of glycerol on WPI-films. Response surface was applied to optimize the amounts of WPI and glycerol in order to obtain films with higher tensile strength (TS), moderate elongation, and lower water vapor permeability so that they could be used as reference films. Honey was added at different concentrations (60%, 80%, and 100%) of g honey/100 g WPI, as a plasticizer to the WPI-films. In comparison to glycerol-plasticized films, an increase in the percentage of honey produced a reduction of 20 ± 10 to 48 ± 0.5% of TS, a 66 ± 0.5% lower in Young's modulus (WPI-films with 100% honey), and an increase of 186 ± 11% in elongation at break in the WPI-films with 100% honey. Honey-plasticized WPI-films were from 29 ± 11 to 43 ± 3% less permeable to water vapor than glycerol-plasticized WPI films. The mechanical characteristics of the 80% honey formulation did not differ significantly from those of the reference film (p > 0.05). Findings from this study indicate that honey has great potential as a plasticizer in WPI-films.

Guar gum/carboxymethyl cellulose based antioxidant film incorporated with halloysite nanotubes and litchi shell waste extract for active packaging

The incorporation of bioactive extract from the food waste into biopolymers is a promising green approach to fabricate active films with antioxidant activity for food packaging. The present study developed bioactive antioxidant films based on guar gum/carboxymethyl cellulose incorporated with halloysite-nanotubes (HNT) and litchi shell extract (LSE). The effects of combining HNT and LSE on the physical, mechanical, and antioxidant properties of the films were analyzed. The results showed LSE caused a reduction in tensile strength; however, the elongation at break substantially improved from 29.93 to 62.12%. FTIR revealed covalent interaction and hydrogen bonding between guar gum/carboxymethyl cellulose and LSE. The XRD and SEM study confirmed interactions among the polymer matrix and LSE compounds. The addition of LSE to guar gum/carboxymethyl cellulose films notably increased the UV-light barrier properties. Moreover, the antioxidant activity of all GCH/LSE substantially improved from 9.46 to 91.52%, more than a ten-fold increase compared to composite neat GCH film. Finally, the oxidative stability of roasted peanuts packed in fabricated GCH/LSE sachets improved after 8 days. Guar gum/carboxymethyl cellulose containing LSE as an antioxidant agent could be applied as food packaging for low water activity oxygen-sensitive food.

From mango by-product to food packaging: Pectin-phenolic antioxidant films from mango peels

The objective of the study was to prepare active films based on pectin and polyphenol-rich extracts from Tommy Atkins mango peels. Aqueous and methanolic extracts showed a variety of phenolic compounds that were identified by UPLC-MS analysis, and a high content of total phenolics that were quantified by the Folin-Ciocalteau method. The methanolic extract showed better results in antioxidant tests and was more effective in inhibiting the growth of Gram-positive and Gram-negative bacteria. The pectin extracted from mango peels showed good thermal stability and a degree of methoxylation of 58.3% by ¹H NMR. The films containing the phenolic extracts showed lower water vapor permeability when compared to the control film (without any phenolic extracts). The incorporation of the extracts led to an increase in elongation (ε) and a decrease in tensile strength (σ) and modulus of elasticity (Y). The films with aqueous or methanolic extracts showed higher antioxidant activity in terms of inhibition of the DPPH radical. Therefore, the films developed in this work are presented as a promising alternative for food packaging and/or coating applications.

Chitosan-silica with hops β-acids added films as prospective food packaging materials: Preparation, characterization, and properties

In this study, silica (SiO₂) and β-acids were added to the chitosan films in order to improve the film's properties. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction analysis (XRD) were used to explore the structure of film. The results of mechanical test indicated that the film containing SiO₂ (0.3%) and β-acids (0.3%) could obtain a significant tensile strength (10.04 MPa). The complex films possessed a good inhibitory effect on three types of bacteria, and good antioxidant activity (>56%, DPPH). The release mechanism of β-acids from the films exhibited Fickian diffusion (n < 0.45). During the storage of soybean oil, the films could well control the changes of the peroxide value, acid value and thiobarbituric acid reactant content. Overall, the biofilms not only possess good physical and chemical properties, but also prolongs the time of food storage.

Comprehensive Review of Polysaccharide-Based Materials in Edible Packaging: A Sustainable Approach

Edible packaging is a sustainable product and technology that uses one kind of "food" (an edible material) to package another kind of food (a packaged product), and organically integrates food with packaging through ingenious material design. Polysaccharides are a reliable source of edible packaging materials with excellent renewable, biodegradable, and biocompatible properties, as well as antioxidant and antimicrobial activities. Using polysaccharide-based materials effectively reduces the dependence on petroleum resources, decreases the carbon footprint of the "product-packaging" system, and provides a "zero-emission" scheme. To date, they have been commercialized and developed rapidly in the food (e.g., fruits and vegetables, meat, nuts, confectioneries, and delicatessens, etc.) packaging industry. However, compared with petroleum-based polymers and plastics, polysaccharides still have limitations in film-forming, mechanical, barrier, and protective properties. Therefore, they need to be improved by reasonable material modifications (chemical or physical modification). This article comprehensively reviews recent research advances, hot issues, and trends of polysaccharide-based materials in edible packaging. Emphasis is given to fundamental compositions and properties, functional modifications, food-packaging applications, and safety risk assessment of polysaccharides (including cellulose, hemicellulose, starch, chitosan, and polysaccharide gums). Therefore, to provide a reference for the development of modern edible packaging.

Structure and Applications of Pectin in Food, Biomedical, and Pharmaceutical Industry: A Review

Pectin is a biocompatible polysaccharide with intrinsic biological activity, which may exhibit different structures depending on its source or extraction method. The extraction of pectin from various industrial by-products presents itself as a green option for the valorization of agro-industrial residues by producing a high commercial value product. Pectin is susceptible to physical, chemical, and/or enzymatic changes. The numerous functional groups present in its structure can stimulate different functionalities, and certain modifications can enable pectin for countless applications in food, agriculture, drugs, and biomedicine. It is currently a trend to use pectin to produce edible coating to protect foodstuff, antimicrobial bio-based films, nanoparticles, healing agents, and cancer treatment. Advances in methodology, use of different sources of extraction, and knowledge about structural modification have significantly expanded the properties, yields, and applications of this polysaccharide. Recently, structurally modified pectin has shown better functional properties and bioactivities than the native one. In addition, pectin can be used in conjunction with a wide variety of biopolymers with differentiated properties and specific functionalities. In this context, this review presents the structural characteristics and properties of pectin and information on the modification of this polysaccharide, its respective applications, perspectives, and future challenges.

Improvement of the UV Barrier and Antibacterial Properties of Crosslinked Pectin/Zinc Oxide Bionanocomposite Films

Pectin-based antibacterial bionanocomposite films were prepared by crosslinking with calcium chloride (CaCl₂) and mixing with zinc oxide nanoparticles (ZnO-NPs) at various concentrations (0.5%, 1%, and 1.5% w/w, based on pectin). Crosslinking with 1% CaCl₂ significantly (p < 0.05) improved the tensile strength of the pectin films, although their elongation at break was decreased. The UV-light barrier property of the pectin/ZnO bionanocomposite films was significantly (p < 0.05) improved with increasing ZnO-NP concentrations. In addition, the bionanocomposite films incorporating 1.5% ZnO-NPs showed excellent antibacterial effects against both Escherichia coli and Staphylococcus aureus, inhibiting over 99% of the bacteria. Therefore, the developed crosslinked pectin/ZnO bionanocomposite films show great potential as active packaging materials with excellent UV-blocking and antibacterial properties.

Biopolymers for Biological Control of Plant Pathogens: Advances in Microencapsulation of Beneficial Microorganisms

The use of biofertilizers, including biocontrol agents such as Pseudomonas and Bacillus in agriculture can increase soil characteristics and plant acquisition of nutrients and enhancement the efficiency of manure and mineral fertilizer. Despite the problems that liquid and solid formulations have in maintaining the viability of microbial agents, encapsulation can improve their application with extended shelf-life, and controlled release from formulations. Research into novel formulation methods especially encapsulation techniques has increased in recent years due to the mounting demand for microbial biological control. The application of polymeric materials in agriculture has developed recently as a replacement for traditional materials and considered an improvement in technological processes in the growing of crops. This study aims to overview of types of biopolymers and methods used for encapsulation of living biological control agents, especially microbial organisms.