Effects of ultrafine comminution treatment on gelling properties of myofibrillar proteins from chicken breast

Impact of konjac glucomannan with varied deacetylation degrees on plant-based meat analogue: Study on the gel properties, digestibility, and microstructure

Polysaccharides are widely used to improve the quality of plant-based meat analogue (PMA). In this study, four kinds of konjac glucomannan (KG) with different deacetylation degrees (DD) were prepared, namely KG1 (native KG, DD = 0.00 %), KG2 (DD = 41.40 %), KG3 (DD = 80.01 %) and KG4 (DD = 89.07 %), and their effects on the quality of PMA were studied. Results manifested that KG3 improved the hardness (from 3017.16 g to 3307.16 g) and protein digestibility (from 49.65 % to 53.01 %) of PMA without reducing the P21, KG2 and KG4 were less effective than KG3, while KG1 led to a significant decline in the hardness and protein digestibility of PMA. The rheological properties and intermolecular force analysis showed that the partially deacetylated KG was more conducive to improving the G' of the protein system during heating and the proportion of covalent bonds in PMA. These findings suggested that partially deacetylated KG was more promising than native or highly deacetylated KG in PMA. Furthermore, scanning electron microscopy revealed that the morphology of KG gradually changed from fine filaments, to coarse filaments, short filaments and granules as DD increased. This study provides a theoretical basis for the application of partially deacetylated KG in PMA.

Feasibility of Tenebrio molitor larvae protein to partially replace lean meat in the processing of hybrid frankfurters: Perspectives on quality profiles and in vitro digestibility

The aim of this study was to investigate the effect of replacing different amounts (5 %, 10 %, 15 %, 20 % and 25 %) of lean meat with Tenebrio molitor larvae protein (TMLP) on the quality profiles of hybrid frankfurters. The results showed that there were no obvious differences in moisture, protein or fat content of all the hybrid frankfurters (P > 0.05), only a higher substitution rate (from 10 % to 25 %) resulted in a higher ash content than the control group (P < 0.05). With the increasing replacement rate (5 %, 10 % and 15 %), the cooking loss of the hybrid frankfurters showed the similar effects as the control group (P > 0.05), whereas the higher replacement rates of 20 % and 25 % obviously decreased the emulsion stability of the hybrid frankfurters. Moreover, with lower substitution rate (5 %, 10 % and 15 %) there were no significant differences in cooking loss between the hybrid frankfurters and the control group (P > 0.05), whereas the higher substitution rates (20 % and 25 %) obviously increased the cooking loss of the hybrid frankfurters (P < 0.05). Meanwhile, as the level of substitution increased, the hybrid frankfurters had higher digestibility, poorer texture than the standard frankfurters, as well as the rheological behaviour of hybrid meat batters (P < 0.05). The results showed that a moderate level (15 %) of TMLP was used to replace lean pork could be potentially and successfully be used to produce hybrid frankfurters.

Ameliorating the stability of native/thermally denatured chicken-derived myofibrillar proteins particles in an aqueous system: The synergistic effect of acidification combined with inulin and inulin/sodium alginate

The effect of acidification through hydrochloric acid combined with inulin (In), and inulin/sodium alginate (In/SA) on the stability of native/thermally denatured myofibrillar proteins (MPs/TMPs) particles in an aqueous system was investigated. At the same pH, MPs-In and TMPs-In particles were smaller and had higher absolute potentials than MPs-In/SA and TMPs-In/SA particles. Additionally, the size of MPs-In particles reached 1 μm, and the solubility increased from 21.73 ± 0.57 % to 76.26 ± 1.27 % when the pH was reduced from 5.0 to 3.0. The absolute potential of TMPs 3-In particles increased from 15.77 ± 0.72 to 28.20 ± 0.30 mV, and the solubility increased from 18.65 ± 0.72 % to 74.53 ± 0.74 %. Confocal laser microscopy revealed that, compared with pH 5.0 or 4.0, MPs-In/TMPs-In particles dispersed more evenly at pH 3.0 compared with pH 5.0 or 4.0. This further confirmed that electrostatic repulsion between particles maximally contributed to particle stability. Furthermore, the α-helix content in TMPs-In particles at pH 3.0 decreased from 41.51 ± 1.09 % (TMPs control) to 16.61 ± 1.87 %. This decrement of an up to 60 % led to decreased intramolecular hydrogen bonds and improved surface hydrophobicity. Therefore, a single polysaccharide (In) combined with MPs/TMPs particles exhibited higher dispersion and stability at pH 3.0. These findings could provide new insights into chicken-derived protein beverage processing.

Study on the mechanism of soy protein isolate to improve quality of reduced-salt Hypophthalmichthys molitrix surimi gel: Focus on gel quality, protein structure, and in vitro digestibility

Excessive intake of sodium chloride may bring a series of diseases; as a result, reduced-salt surimi gels have gained growing popularity for sodium reduction. This paper studied soy protein isolate (SPI, 2.0%, 4.0%, and 6.0%, w/w) as a gel enhancer for reduced-salt silver carp surimi. Compared with the control (2.0% NaCl), the addition of SPI significantly increased (P < 0.05) the total SH content, hydrophobic interaction force, disulfide bond, hardness, gel strength, and water-holding capacity of the gels. During the thermal denaturation process, SPI and myofibrillar protein jointly participated in the formation of the gel network, resulting in a G' value increase at 90 °C, forming a denser/more stable gel network structure. In vitro pepsin digestion results showed the digestibility of the reduced-salt gel with SPI was higher than that of the control. Therefore, appropriate SPI addition can improve the gel performance of reduced-salt surimi gel without affecting digestion and absorption.

Quality characteristics of peanut protein-based patties produced with pre-emulsified olive oil as a fat replacer: Influence of acylglycerol type

The emulsion (O/W) may be used as a fat replacer to develop healthier meat analogs. The purpose of this work was to evaluate the effects of oil incorporation methods (direct oil addition and emulsion addition) and oil types [triacylglycerol (TAG) and diacylglycerol (DAG)] on the quality characteristics of peanut protein-based patties crosslinked by transglutaminase (TGase). The patties formulated with emulsions showed larger texture parameters (springiness, cohesiveness and gumminess), lower cooking loss and higher acceptability compared with directly adding oil. The rheological results confirmed that the presence of emulsions strengthened the gel structure in patties, which allowed the patties containing emulsions to stabilize free water. Whereas, TAG-based emulsion was more effective than DAG-based emulsion in improving quality of products, possibly because the competitive adsorption at oil-water interface of DAG reduced the crosslinking between the interfacial protein and adjacent protein molecules. This study revealed the relationship between the acylglycerol type in emulsion and the patty quality, providing a reference for the development of plant-based patties.

Effects of the soy protein to wheat gluten ratio on the physicochemical and structural properties of Alaska pollock surimi-based meat analogs by high moisture extrusion

Surimi products have attracted much attention and are widely used in the food industry. Currently, the processing and exploitation of surimi products are mostly based on their gel characteristics. However, the abundant protein in surimi can be rearranged and integrated by high-temperature melting to generate a new surimi product with fibrous structures. In this study, meat analogs (new surimi product) were produced by high moisture extrusion (HME) using Alaska pollock surimi and plant protein (8:2), where the plant protein consisted of different ratios of soy protein and wheat gluten (9:1, 7:3, 5:5, 3:7 and 1:9). The product was marked as SSG because it was composed of Alaska pollock surimi, soy protein and wheat gluten. The structure and color results showed that the hardness and ΔE of SSG decreased, while the fibrous degree and lightness increased with increasing WG content. The observation of the macrostructure and microstructure also showed that the skeleton structure of SSG was more obvious with increasing WG addition, but the viscosity reflected a decreasing trend. Furthermore, an increase in the WG content raised the free water ratio and the total content of β-sheets, whereas the appropriate plant protein ratio reduced the SSG's thermal stability. In conclusion, Alaskan pollock surimi and the appropriate proportion of plant protein can form structurally stable meat analogs by high moisture extrusion.

Improved gelling and emulsifying properties of chicken wooden breast myofibrillar protein by high-intensity ultrasound combination with pH-shifting

The functional properties of chicken wooden breast myofibrillar protein (WBMP) are impaired. The protein structure and functional properties of WBMP are investigated using high-intensity ultrasound (HIU, 20 kHz, 200, 400, 600, and 800 W) combined with pH-shifting. HIU promoted the unfolding of WBMP, reduced the particle size of WBMP, and enhanced electrostatic repulsion. Medium-power (200 and 400 W) HIU promoted the α-helix to β-sheet transformation, while high-power (600 and 800 W) HIU significantly (P < 0.05) increased the content of the random coil. The microstructure and images after storage further showed that 400 W HIU in combination with pH-shifting made the WBMP emulsion more uniform. In addition, gel performance analysis showed that the gel strength and water-holding capacity of the protein gel increased gradually after 400 W. Scanning electron microscope images also showed the formation of a stable network structure in the protein gel. This work could help promote the utilization of inferior proteins similar to WBMP, but the utilization rate still needs to be further improved.

Use of soybean oil to modulate the gel properties of soybean protein isolation-wheat gluten composite with or without CaCl2

BACKGROUND

Plant protein is widely used in the study of animal protein substitutes and healthy sustainable products. The gel properties are crucial for the production of plant protein foods. Therefore, the present study investigated the use of soybean oil to modulate the gel properties of soybean protein isolation-wheat gluten composite with or without CaCl2 .

RESULTS

Oil droplets filled protein network pores under the addition of soybean oil (1-2%). This resulted in an enhanced gel hardness and water holding capacity. Further addition of soybean oil (3-4%), oil droplets and some protein-oil compounds increased the distance between the protein molecule chain. The results of Fourier transform infrared spectroscopy and intermolecular interaction also showed that the disulfide bond and β-sheet ratio decreased in the gel system, which damaged the overall structure of the gel network. Compared with the addition of 0 m CaCl2 , salt ion reduced the electrostatic repulsion between proteins, and local protein cross-linking was more intense at 0.005 m CaCl2 concentration. In the present study, structural properties and rheological analysis showed that the overall strength of the gel was weakened after the addition of CaCl2 .

CONCLUSION

The presence of appropriate amount of soybean oil can fill the gel pores and improve the texture properties and network structure of soy protein isolate-wheat gluten (SPI-WG) composite gel. Excessive soybean oil may hinder protein-protein interaction and adversely affect protein gel. In addition, the presence or absence of CaCl2 significantly affected the gelling properties of SPI-WG composite protein gels. © 2023 Society of Chemical Industry.

pH-Shifting combined with ultrasound treatment of emulsion-filled β-conglycinin gels as β-carotene carriers: Effect of emulsion concentration on gel properties

In this work, emulsion-filled gels were prepared from natural and pH-shifting combined with ultrasound β-conglycinin (7S) as emulsifiers. The emulsifier modification and emulsion concentrations (5, 10, 15, 20 wt%) were evaluated on the structural and β-carotene release properties of the gels. Compared to the 7S hydrogel, the emulsion-filled gels exhibited better water-holding and textural properties. The 7S modification and the increase in emulsion concentration resulted in altered water distribution and improved microstructure and rheological properties of the emulsion-filled gels. The dense and homogeneous gel network was formed at an emulsion content of 15 wt%. The gels were regulated by different release kinetics in a simulated gastrointestinal environment. M-15 showed the highest bioaccessibility and chemical stability (72.25% and 89.87%) with good slow-release properties of β-carotene. These results will guide the development of encapsulated delivery systems for gel food products.

Dietary fiber modification: structure, physicochemical properties, bioactivities, and application-a review

There is increasing attention on the modification of dietary fiber (DF), since its effective improvement on properties and functions of DF. Modification of DF can change their structure and functions to enhance their bioactivities, and endow them with huge application potential in the field of food and nutrition. Here, we classified and explained the different modification methods of DF, especially dietary polysaccharides. Different modification methods exert variable effects on the chemical structure of DF such as molecular weight, monosaccharide composition, functional groups, chain structure, and conformation. Moreover, we have discussed the change in physicochemical properties and biological activities of DF, resulting from alterations in the chemical structure of DF, along with a few applications of modified DF. Finally, we have summarized the modified effects of DF. This review will provide a foundation for further studies on DF modification and promote the future application of DF in food products.

Terminal temperature dominates the gel quality of chicken meat paste: An emphasis on multiple heating-cooling regimes

A survey of various heating strategies, including terminal temperature (70 and 90 °C), step heating (with or without holding at 50 °C for 10 min) and step cooling (with or without holding at 50 °C for 10 min), on the gelation properties of chicken meat paste was conducted. Compared to 70 °C, 90 °C heating drastically increased (p < 0.05) cooking loss (CL) from 5% to > 15% since more immobilized water was pushed out as free water. Step cooling could mitigate the high-temperature-induced CL. The impact of heating strategies on the textural properties of chicken meat is much lower than that on CL. For both 70 °C and 90 °C cooked samples, step heating reduced (p < 0.05) their whiteness by increasing the yellowness. The storage modulus (G') increase during cooling is mainly driven by cooling leaded lower mobility. Overall, low-temperature ramping heating produced excellent meat gel with low energy consumption.

Oxidative stability and gelation properties of myofibrillar protein from chicken breast after post-mortem frozen storage as influenced by phenolic compound-pterostilbene

The aim of this study was to elucidate the effects of dietary pterostilbene supplementation on physicochemical changes and gel properties of myofibrillar protein (MP) in chicken when subjected to short-term frozen storage. The results showed that pterostilbene supplementation diminished the oxidation of MP compared to the control, as the carbonyl content was significantly reduced and the loss of sulfhydryl and free amino groups was slowed. Meanwhile, the surface hydrophobicity and insolubility of MP were significantly reduced. FT-IR and endogenous fluorescence spectroscopy analysis indicated that dietary pterostilbene inhibited the unfolding of protein structure and the transition of α-helix to β-sheet structure. The integrity of the protein structure contributed to the gel quality. The strength, whiteness and water-holding capacity (WHC) of MP gels were improved in the pterostilbene treatment group. In terms of microstructure, pterostilbene facilitated the formation of dense and homogeneous gel network structure. In summary, these findings suggest that pterostilbene could be used as a dietary supplement to maintain the structural stability of MP in postmortem chicken breast muscle, allowing for excellent gel functional properties.

Physicochemical properties and microstructure of composite surimi gels: The effects of ultrasonic treatment and olive oil concentration

This study was conducted to evaluate the effects of extra virgin olive (EVO) oil incorporation on the physicochemical properties and microstructure of surimi gels subjected to ultrasound-assisted water-bath heating. As the oil content was increased from 0 to 5 g/100 g, the breaking force and gel strength of the surimi gels significantly decreased, while the whiteness level exhibited the opposite tendency irrespective of the heating method. Compared with the traditional water-bath heating method, the ultrasonic heating promoted the unfolding of the α-helix structure and intensified the formation of β-sheet content and non-covalent bonds (ionic bonds, hydrogen bonds, and disulfide bonds), especially disulfide bonds, which contributed to the further crosslinking of the proteins and to gelation, thereby improving the gels' strength. In addition, smaller cavities and compact microstructures were observed in the low-oil (≤3 g/100 g) surimi gels under ultrasonic treatment, which effectively prevented water migration in the gel network and resulted in a high water holding capacity and uniform water distribution. However, the ultrasonic treatment barely remedied the poor microstructures of the high-oil (>3 g/100 g) surimi gels owing to oil coalescence, which weakened the protein-protein interaction. In conclusion, ultrasonic treatment combined with water-bath heating significantly improved the gelation properties of the low-oil surimi gels, although it did not remarkably improve those of the high-oil gels. The choice of a suitable oil concentration could be of great importance for the production and functioning of surimi products via ultrasound-assisted treatments.

Effects of quinoa protein Pickering emulsion on the properties, structure and intermolecular interactions of myofibrillar protein gel

The effects of quinoa protein Pickering emulsion (QPE) on the gel properties, protein structure and intermolecular interactions of myofibrillar protein (MP) gels were studied. Compared with the MP gels without QPE, the MP gels with 5.0%-7.5% added QPE showed significant increasing trends in storage modulus (G'), whiteness, gel strength and water holding capacity (WHC). The content of disulfide bonds in the gel increased with the addition of QPE and the disulfide bond conformation changed from gauche-gauche-gauche to gauche-gauche-trans. Moreover, the increase of hydrogen bonds after QPE addition confirmed the transformation from α-helix to β-sheet, as β-sheet structure was stabilized by interchain hydrogen bonds. The added QPE also enhanced the hydrophobic interaction and electrostatic interaction of MP gels. To conclude, the addition of 5.0%-7.5% QPE improved the intermolecular interactions and the structure stability of MP gels, and enhanced the gelation and WHC of MP gels.

Synergistic effect of preheating and different power output high-intensity ultrasound on the physicochemical, structural, and gelling properties of myofibrillar protein from chicken wooden breast

The effects of preheating to 50 ℃ and the subsequent application of high-intensity ultrasound (HIU, 20 kHz) at 200, 400, 600, and 800 W on the physicochemical, structural, and gelling properties of wooden breast myofibrillar protein (WBMP) were studied. Results suggested that the WBMP structure expanded to the balanced state at 600 W, and rheological properties exhibit that 600 W HIU (P < 0.05) significantly improved the storage modulus (G') of WBMP. Notably, the WBMP gel (600 W) had the best hardness (65.428 ± 0.33 g), springiness (0.582 ± 0.01), and water-holding capacity (86.11 ± 0.83%). Raman spectra and low-field NMR indicated that 600 W HIU increased the β-fold content (37.94 ± 0.04%) and enlarged the immobilized-water proportion (93.87 ± 0.46%). Scanning electron micrographs confirmed that the gel was uniform and dense at 600 W. Therefore, preheating to 50 ℃ followed by HIU (600 W) helped form a superior WBMP gel.

Effect of NaCl on the Rheological, Structural, and Gelling Properties of Walnut Protein Isolate-κ-Carrageenan Composite Gels

In this study, we discovered that a certain concentration of Na⁺ (15 mM) significantly improved the bond strength (12.94 ± 0.93 MPa), thermal stability (72.68 °C), rheological properties, and textural attributes of walnut protein isolate (WNPI)-κ-carrageenan (KC) composite gel. Electrostatic force, hydrophobic interaction, hydrogen bond, and disulfide bond were also significantly strengthened; the α-helix decreased, and the β-sheet increased in the secondary structure, indicating that the protein molecules in the gel system aggregated in an orderly manner, which led to a much denser and more uniform gel network as well as improved water-holding capacity. In this experimental research, we developed a new type of walnut protein gel that could provide technical support for the high-value utilization and quality control of walnut protein.

Radio frequency heating improves water retention of pork myofibrillar protein gel: An analysis from water distribution and structure

This study was to explore effects of hot air assisted or not assisted radio frequency (RF, 27.12 MHz, 1.4 kW) heating with different electrode gaps (100 mm, 120 mm, and 140 mm) on the water-holding capacity (WHC) of myofibrillar protein (MP) gel and to understand the underlying mechanism through chemical forces, water distribution, and structure. The results showed that the MP gels heated by RF (100 mm) had the highest WHC and uniform gel network structure. As for RF with 100 mm electrode gap, the increased ionic and hydrogen bonds might be conducive to the WHC compared to water bath heating, which was verified by Low-field nuclear magnetic resonance results that the free water converted into the immobilized water. Raman spectroscopy results revealed that RF (100 mm) induced the self-assembly of β-sheet to α-helix, which conduced to the stable and ordered gel network structure.

Plasma activated water-induced formation of compact chicken myofibrillar protein gel structures with intrinsically antibacterial activity

The poor gel strength and microbial infection of conventional chicken myofibrillar protein (CMP) gels have severely limited the application. Here, plasma activated water (PAW) instead of normal water was used to prepare CMP gels. PAW prepared by treating deionized water with plasma jet was incubated with CMPs and followed by heating to prepare CMP gels. Effects of PAW on CMP gels were assessed in terms of basic physicochemical properties, network structure, and antibacterial activity. The results showed that PAW treatment accelerated the aggregation of CMPs and increased the strength and water holding capacity of CMP gels. Due to the presence of NO and NO₂ free radicals in PAW, the prepared CMP gels were endowed with antibacterial activity against Salmonella Enteritidis and Staphylococcus aureus. The new method of PAW-induced CMP gels will have the prospect of improving the quality of gels and extending the shelf life of chicken gel products.

Mechanisms of change in gel water-holding capacity of myofibrillar proteins affected by lipid oxidation: The role of protein unfolding and cross-linking

This work explored the effects of protein unfolding and cross-linking induced by lipid oxidation (linoleic acid, OLA) on the gel water-holding capacity (WHC) of beef myofibrillar proteins (MP). Medium concentration of OLA (≤6 mM) caused the increase of gel WHC from 55.2% to 65.1%, while relative high OLA concentration (>6 mM) decreased the gel WHC. When the OLA concentrations increased from 0 to 10 mM, the population of immobile water of gel decreased from 92.91% to 78.97%, whereas that of free water increased from 6.13% to 19.80%, suggesting that OLA treatment regardless concentration was harmful for gel WHC. However, medium OLA concentrations (≤6 mM) caused the shifting of α-helixes to β-sheets in MP gel, exerting positive effect on gel WHC. Protein unfolding and cross-linking jointly determined the increased gel WHC at moderate oxidative modification. Additionally, the protein aggregation at high OLA concentration resulted in decreased gel WHC.

The characteristics of gelation of myofibrillar proteins combined with salt soluble Rhodotorula glutinis proteins by enzymatic crosslinking

Some microbial single-cell proteins are capable of producing synergistic crosslinking interactions with edible proteins by rational regulation. Herein, we reported that salt soluble proteins (RGP) extracted from Rhodotorula glutinis in an alkaline and saline system may combine with myofibrillar proteins (MP) by transglutaminase (TG) polymerization to form improvable irreversible thermal co-gels. The combination of MP, RGP, and TG, namely restructured MP gels, led to significantly enhanced water holding capacity (WHC), up to 90.76 ± 1.88% (% of retained water) and textural properties (hardness, springiness, and adhesiveness) as well as decreases of 'gauche-gauche-gauche' SS bonds and α-helix conformations and increases of 'gauche-gauche-trans' SS bonds and β-fold conformations, compared to MP and MP-RGP groups. Differential scanning calorimetry analysis validated that thermostability of myosins and actins from MP was reduced after using RGP, TG, and their combination, and unfolding and denaturation of myosin occurred easily during thermal co-gelation by TG and/or RGP.

Effect of pH-shifting treatment on structural and heat induced gel properties of peanut protein isolate

Modifying proteins with new methods to improve their functional properties is essential to extend their application in food related field. In this study, the effect of pH-shifting treatment on structural and heat induced gel properties of peanut protein isolate (PPI) were investigated. PPI was subject to different pH conditions (pH 2, pH 4, pH 10, and pH 12) for 1 h, then adjusted back to pH 7 and they were marked as PPI2, PPI4, PPI10, and PPI12, respectively. It was found that the breaking force (BF) and water holding capacity (WHC) of PPI10 gel were significantly improved due to the decreased particle size, increased solubility, free sulfhydryl group content and surface hydrophobicity of PPI10. While PPI2 or PPI12 lost their gel ability due to the formation of large protein aggregates. These results indicated that pH-shifting treatment might be a convenient and economical method to prepare PPI with different gel and structural properties.