Effects of protein concentration, pH, and NaCl concentration on the physicochemical, interfacial, and emulsifying properties of β-conglycinin

Soy protein particles as stabilizers of heat-stable O/W emulsions with 20% protein content

In response to the increasing demand for nutritionally rich foods, consumer preference for protein-enriched beverages has grown. However, heat-induced protein aggregation and gelation significantly hinders the production of high-protein drinks. In this study, oil-in-water (O/W) emulsions with exceptional thermal stability were formulated using modified soy protein particles (MSPs). These MSPs effectively resisted gel formation, even at a protein concentration of up to 20% (w/v). In contrast, emulsions prepared with untreated soy proteins (SPs) experienced pronounced gelation under identical conditions. The compact structure of MSPs, in comparison to SPs, imparted resistance to heat-induced denaturation and aggregation. Additionally, the emulsion displayed heightened heat processing insensitivity, due to the enhanced hydrophobicity of MSPs and their rapid adsorption at the oil-water interface, resulting in a denser, more elastic, and resilient interfacial film. These findings provide practical insights for the formulation of protein-rich milk alternatives, meeting the evolving market demands.

Protein extraction from chlorella pyrenoidosa microalgae: Green methodologies, functional assessment, and waste stream valorization for bioenergy production

C. pyrenoidosa, a species of microalgae, has been recognized as a viable protein source for human consumption. The primary challenges in this context are the development of an efficient extraction process and the valorization of the resultant waste streams. This study, situated within the paradigm of circular economy, presents an innovative extraction approach that achieved a protein extraction efficiency of 62 %. The extracted protein exhibited remarkable oil-water emulsifying performances, such as uniform morphology with high creaming stability, suggesting a sustainable alternative to conventional emulsifiers. Additionally, hydrothermal liquefaction technique was employed for converting the residual biomass and waste solution from the extraction process into biocrude. A biocrude yield exceeding 40 wt%, characterized by a carbon content of 73 % and a higher heating value of 36 MJ/kg, were obtained. These findings demonstrate the promising potential of microalgae biorefinery, which is significant for paving toward circular economy and zero-waste society.

Enhanced emulsification performance and interfacial properties of Janus-like rapeseed cruciferin through asymmetric acylation modification

Plant protein emulsifiers, particularly rapeseed protein isolate with its superior amino acid composition and predominantly globular protein, have captured significant interest in the food industry. Nonetheless, the application of these proteins has been stymied by their lackluster emulsification properties. Addressing this challenge, our study implements an innovative asymmetric acylation technique to modify the surface of rapeseed cruciferin (RC), morphing it into a structure resembling Janus nanoparticles. This alteration amplifies the emulsification prowess of RC by a remarkable 2.7 times compared to its natural form, and 1.43 times over its conventionally acylated counterpart. The asymmetrically acylated RC, marked by a distinctive three-phase contact angle of 90.4°, manifests an outstanding amphiphilic character. Moreover, it surpasses both the natural and conventionally acylated RC in terms of diffusion, penetration, and rearrangement rates, as well as protein concentration at the oil-water interface. Compared to commonly used emulsifiers in the food industry, such as lecithin and soy protein, the asymmetrically acylated RC stands out, stabilizing emulsions with the tiniest particle size and effectively staving off emulsion stratification over a longer duration. This study underscores that asymmetric acylation serves as a reliable methodology for producing efficient plant protein emulsifiers, considerably amplifying their utility in the food industry.

Effect of NaCl concentration on the formation of high internal phase emulsion based on whey protein isolate microgel particles

At present, the effect of structural modification of microgel particles on high internal phase emulsions (HIPEs) is less studied. In this study, the structural modification effect of NaCl on whey protein isolate microgels (WPIMPs) was comprehensively characterized and applied to the construction of HIPEs. WPIMPs were prepared with NaCl (0-150 mM) and the structural changes were analyzed by measuring the particle size, Zeta-potential, and endogenous fluorescence spectra. The results showed that inducing WPIMPs by NaCl enhanced the surface hydrophobicity, decreased the Zeta potential, and elevated the degree of cross-linking. The interfacial behavior of WPIMPs was characterized by measuring interfacial tensions and adsorbed layer properties. The results showed that NaCl induction decreased the interfacial tension, increased the thickness of the adsorbed layer, and improved the viscoelasticity. The HIPEs were analyzed for micromorphology and particle sizes. The results indicated that NaCl-induced WPIMPs favored the formation of HIPEs with small particle sizes and provided HIPEs with superior environmental stability. This study provides a new idea for the structural modification of microgels and a new theoretical basis for the construction conditions of HIPE.

Improved emulsifying properties of water-soluble myofibrillar proteins at acidic pH conditions: Emphasizing pH-regulated electrostatic interactions with chitosan

Water-soluble muscle protein with enhanced functionalities has attracted great interest for low-salt food design. Electrostatic interactions of chitosan (CS) with myofibrillar proteins (MP) in water-aqueous solution at acidic pHs (4.0-6.5) were investigated, and how pH regulated complex formation, microstructures, conformation changes, and emulsifying capacity was systematically explored. At pH 4.0-4.5, MP and CS were positively charged and displayed a co-soluble system, exhibiting small particles and high solubility. When the pH increased to near the isoelectric point (pI) of MP (pH 5.0-6.0), electrostatic interactions largely inhibited the aggregation of MP by forming smaller particle complexes. The flexible structures and improved amphiphilic properties promoted protein absorption at the oil-water interface, further improving the emulsion stability. When the pH increased to 6.5, large aggregates were formed causing poor functionalities. This study could provide great insights to further exploit meat-protein-based low-salt functional foods in novel food design.

pH-induced physiochemical and structural changes of milk proteins mixtures and its effect on foaming behavior

Milk proteins are well known to produce aerated food due to the amphiphilicity. However, milk proteins are commonly added in blends for the desirable properties in food industry. In this study, the foaming properties of milk protein mixtures (MPM), a mixtures of whey protein isolated (WPI) and milk protein concentrate (MPC), was studied through foaming capacity (FC), foam stability (FS), and foam morphology at pH 3.0-9.0. Physiochemical, structural, surface properties, and Pearson correlation analysis were measured to gain insight into foaming behavior. Results indicated that MPM showed excellent FC (113.0-114.3 %) and FS (90.7-93.0 %) at pH 6.0-9.0, and foam displayed a smaller size and uniform distribution. MPM solutions showed smaller particles, higher solubility, and lower apparent viscosity at pH 6.0-9.0, which resulted in an increase in surface pressure and adsorption rate (Kdiff), facilitating more protein absorbed to interface. To further investigate structural changes, various spectral methods were used, in which the structure of MPM was changed with pH. Correlation analysis further suggests that Kdiff and solubility positively affect the formation of foam, while free sulfhydryl and β-sheet contributed to stabilizing foams. These findings provide valuable information on MPM as ingredients for aerated foods under acidic, neutral, and alkaline conditions.

Structural properties and emulsification of myofibrillar proteins from hairtail (Trichiurus haumela) at different salt ions

The structural properties and emulsification of myofibrillar proteins (MPs) are susceptibly affected by salt ions. The effect of different salt ions on the structural properties and emulsification of MPs from hairtail (Trichiurus haumela) remains unclear. Hairtail MPs were analyzed under different ion treatments of Na+, K+, Ca2+ and Mg2+. MPs at K+ and Na+ treatment showed a similar trend on salt effect due to the unfolding of proteins under salt ions. However, the excessive electrostatic effect of divalent ions could enhance protein aggregation, especially at Ca2+ and Mg2+. The β-sheet of MPs at different salt ions interconverted with α-helix and random coil at ionic strengths from 0.1 mol/L to 1.0 mol/L. The surface hydrophobicity and active sulfhydryl content of MPs increased with the improvement of ionic strengths at 0-0.8 mol/L. Under Ca2+ and Mg2+ treatments, the turbidity of MPs was low compared to that under the treatment of Na+ and K+. Additionally, the emulsification of hairtail MPs treated with different ions was improved at an ionic strength of 0.6 mol/L. This study can contribute to using salts in constructing fish protein-based emulsions for manufacturing emulsified surimi products and promoting the development and utilization of hairtail proteins.

Influence of pH and ionic strength on the physicochemical and structural properties of soybean β-conglycinin subunits in aqueous dispersions

Understanding the impact of pH and ionic strength on the physicochemical and structural properties of soy proteins at subunit level is essential for design and fabrication of many plant-based foods. In this study, soybean β-conglycinin and its subunit fractions αα' and β were dispersed in solutions with different pH values (3.7, 7.6, and 9.0) at low (5 mM NaCl) and high (400 mM NaCl) ionic strengths, respectively. The solubility, rheology, particle size, zeta potential, microstructure, secondary structure, and tertiary structure of the different dispersions were analyzed using a range of analytical methods. The β-conglycinin, αα'- and β-subunits aggregated near the isoelectric point (pH 3.7). Increasing the ionic strength led to the assembly of more homogeneous units. An increase in ionic strength at pH 7.6 and pH 9.0 led to electrostatic screening, which promoted dissociation of the aggregates. The β-subunit showed a greater sensitivity to pH and ionic strength than the αα'-subunits. Based on the evidence from a range of analytical methods, the highly hydrophilic extension region of the αα'-subunits played an important role in determining the stability of the β-conglycinin dispersions under different environmental conditions. Moreover, the N-linked glycans appeared to impact the conformation and aggregation state of the β-conglycinin.

Effects of protein concentration, ionic strength, and heat treatment on the interfacial and emulsifying properties of coconut (Cocos nucifera L.) globulins

This research aimed to investigate the effects of protein concentration (0.2 %-1.0 %), ionic strength (100-500 mM NaCl), and heat treatment (temperature: 80 and 90℃; time: 15 and 30 min) on the interfacial and emulsifying properties of coconut globulins (CG). When protein concentration was set at 0.2-0.6 %, the interfacial adsorption increased with the increasing of protein concentration. However, the lowest interfacial viscoelasticity was found when CG concentration was 0.6 %. When the protein concentration was higher than 0.6 %, the dilatational viscoelasticity increased with the increasing of protein concentration. The protein concentration showed positive effect on the emulsion stability of CG. The ionic strength showed positive effect on the interfacial adsorption but negative effects on the interfacial viscoelasticity and emulsion stability. Higher temperature and longer heating time brought worse interface behavior. The heated CG (90℃, 30 min) had the worst interfacial behavior but the best emulsion stability.

Ultrastable High Internal Phase Pickering Emulsions: Forming Mechanism, Processability, and Application in 3D Printing

High internal phase Pickering emulsions (HIPPEs) are versatile platforms for various applications owing to their low-density, solid-like structure, and large specific surface area. Here, naturally occurring polysaccharide-protein hybrid nanoparticles (PPH NPs) were used to stabilize HIPPEs with an internal phase fraction of 80% at a PPH NP concentration of 1.5%. The obtained HIPPEs displayed a gel-like behavior with excellent stability against centrifugation (10000g, 10 min), temperature (4-121 °C), pH (1.0-11.0), and ionic strength (0-500 mM). Confocal laser scanning microscope and cryo-scanning electron microscopy results showed that PPH NPs contributed to the stability of HIPPEs by effectively adsorbing and anchoring on the surface of the emulsion droplets layer by layer to form a dense 3D network barrier to inhibit droplet coalescence. The rheological analysis showed that the HIPPEs possessed a higher viscosity and lower frequency dependence with increasing PPH NP concentration, suggesting the potential application of such HIPPEs in three-dimensional (3D) printing, which was subsequently confirmed by a 3D printing experiment. This work provides highly stable and processable HIPPEs, which can be developed as facile and reusable materials for numerous applications. They can also be directly used for future food manufacturing, drug and nutrient delivery, and tissue reconstruction.

Glycation Improved the Interfacial Adsorption and Emulsifying Performance of β-Conglycinin to Stabilize the High Internal Phase Emulsions

This study investigated the interfacial adsorption and emulsifying performance of glycated β-conglycinin (7S) with D-galactose (Gal) at various times. Results indicated that glycation increased the particle sizes and zeta potentials of glycated 7S by inducing subunit dissociation. Glycation destroyed the tertiary structures and transformed secondary structures from an ordered one to a disordered one, leading to the more flexible structures of glycated 7S compared with untreated 7S. All these results affected the structural unfolding and rearrangement of glycated 7S at the oil/water interface. Therefore, glycated 7S improved interfacial adsorption and formed an interfacial viscoelasticity layer, increasing emulsifying performance to stabilize high internal phase emulsions (HIPE) with self-supportive structures. Furthermore, the solid gel-like network of HIPE stabilized by glycated 7S led to emulsification stability. This result provided new ideas to improve the functional properties of plant proteins by changing the interfacial structure.

Intermolecular forces regulate in-vitro digestion of whey protein emulsion gels: Towards controlled lipid release

HYPOTHESIS

The utilization of emulsion-filled protein hydrogels for controlled lipid release in the gastrointestinal tract (GIT) displays great potential in drug delivery and obesity treatment. However, how intermolecular interactions among protein molecules influence lipid digestion of the gels is still understudied.

EXPERIMENTS

Differently structured whey protein emulsion gels were fabricated by heating emulsions with blocking of disulfide bonds (the "noncovalent" gel), noncovalent interactions (the "disulfide" gel), or neither of these (the "control" gel). The intermolecular interactions-gel structure-lipid digestion relationship was investigated by characterizing structural/mechanical properties of the gels and monitoring their dynamic breakdown in a simulated GIT.

FINDINGS

Although the disulfide-crosslinked protein network formed thick interfacial layers around oil droplets and resisted intestinal proteolysis, the "disulfide" gel had the fastest lipolysis rate, indicating that it could not inhibit the access of lipases to oil droplets. In contrast, the "noncovalent" gel was more susceptible to in-vitro digestion than the "control" gel because of lower gel strength, resulting in a faster lipolysis rate. This demonstrated that intermolecular disulfide bonds and noncovalent interactions played distinctive roles in the digestion of the gels; they represented the structural backbone and the infill in the gel structure, respectively.

Effects of tea saponin on the foaming properties of pea protein

Plant proteins are becoming increasingly important for foam formation as an alternative to animal proteins. Consumers, however, are unsatisfied with the foaming properties of pea protein isolates. Recent research on proteins and surfactants has primarily concentrated on chemically synthesized surfactants. In this study, foams were prepared by complexing pea protein isolates with a natural small molecule surfactant tea saponin. This study investigates the mechanisms responsible for the formation and stability of foams prepared from pea protein isolates (PPIs) complexed with tea saponins. Analyses of foaming performance were carried out by analyzing the morphology of foam, foaming properties, foam's rheological properties, and the microstructure of the pea protein-tea saponin complex system. Compared to the pea protein isolate alone, the pea protein-tea saponin complex significantly improved foaming capacity and foaming stability. As shown by light microscopy analysis, the size of the foam decreased and became more homogeneous, probably because of the altered aggregate state of the protein. In this study, natural surfactants and mixtures of plant proteins are studied in order to better understand their properties. The mixed system has excellent prospects for application in the industries related to foam.

Effect of salt treatment on the stabilization of Pickering emulsions prepared with rice bran protein

In this study, salt addition (NaCl and CaCl₂) was utilized to improve the stability of emulsions formed by rice bran protein (RBP). The result showed that salt addition improved the adsorption of protein on the oil-water interface and enhanced the physical stability of emulsions. Compared to NaCl condition, emulsions with CaCl₂ (especially 200 mM) addition exhibited more significant storage stability, as microscopy images showed emulsion structure unchanged and droplet size increasing slightly from 12.02 µm to 16.04 µm in 7 days. It was attributed to the strengthened particle complexation with CaCl₂ and the increased hydrophobic interactions, which is explained by the improved particle size (260.93 nm), surface hydrophobicity (1890.10) and fluorescence intensity, thus inducing dense and hardly destroyed interfacial layers. Rheological behavior analyses suggested that salt-induced emulsions had higher viscoelasticity and maintained a stable gel-like structure. The result of study explored the mechanism of salt treated protein particles, developed a further understanding of Pickering emulsion, and was beneficial to the application of RBP.

Interfacial Properties of Pea Protein Hydrolysate: The Effect of Ionic Strength

The effect of a tryptic hydrolysis as well as the effect of ionic strength (0–0.4 M NaCl) was investigated on the oil/water interfacial properties of soluble pea protein hydrolysate (SPPH) at neutral pH and room temperature (20 ± 0.01 °C). SEC-MALS and SDS-Page analysis showed that tryptic hydrolysis created a lower molecular weight polypeptide mixture, whereas FTIR analysis and DSC thermograms demonstrated a more disordered and flexible structure. The bulk properties of SPPH were studied in terms of hydrodynamic diameter and turbidity, where higher particle size (+ ~13 nm) and turbidity were observed at 0.4 M NaCl. Regarding the interfacial properties, the surface activity of SPPH improved by increasing ionic strength, with maximum interfacial pressure (14.28 mN/m) at 0.4 M NaCl. Nevertheless, the addition of NaCl negatively affected the elasticity and strength of the interfacial film, where the sample without salt exhibited the highest dilatational and shear storage modulus in all the frequencies considered.

Thoroughly review the recent progresses in improving O/W interfacial properties of proteins through various strategies

Along with the future food market developing world widely, the personalized nutrition and rational function food design are found to be urgently attracted. Oil in a water (O/W) emulsion system has an excellent ability to maintain nutraceuticals and thus plays a promising role in producing future functional foods. Understanding the interfacial related mechanisms involved are essential for improving the quality of food products. Protein can effectively reduce interfacial tension and stable immiscible phases. The interfacial properties of proteins directly affect the emulsion qualities, which have gradually become a prospective topic. This review will first briefly discuss the interfacial-related fundamental factors of proteins. Next, the paper thoroughly overviewed current physical and chemical strategies tailored to improving the interfacial and emulsion properties of proteins. To be summarized, a higher flexibility could allow protein to be more easily unfolded and adsorbed onto the interface but could also possibly form a softer interfacial film. Several physical strategies, such as thermal, ultrasound and especially high-pressure homogenization are well applied to improve the interfacial properties. The interfacial behavior is also altered by various green chemical strategies, such as pH adjustment, covalent modification, and low molecular weight (LMW) surfactant addition. These strategies upgraded emulsion properties by increasing adsorption load, accelerating diffusion and adsorption rate, associated with lowering interfacial tension, and promoting interfacial protein interactions. Future researches targeted at elucidating interfacial-bulk protein interactions, unraveling interfacial behavior through in silico tools, exploring connection between interfacial-industrial processing properties, and clarifying the interfacial-sensory-digestive relationships of O/W emulsions is needed to develop emulsion applications.

Characterization of a Novel High Internal Phase Pickering Emulsions Stabilized by Soy Protein Self-Assembled Gel Particles

In this paper, a novel high-internal-phase Pickering emulsion (HIPPE) prepared by acid-induced self-assembly SPI gel (A/S-SPIG) was investigated. The steady-state shear test results showed that all HIPPEs were typical shear thinning emulsion, which could form stable emulsion (0.2–1.2% SPI concentration). The network structure of HIPPE stabilized by A/S-SPIG particles (0.2–1.2% SPI concentration) was continuously enhanced with increasing SPI concentration. The high concentration of SPI particles increased the crystallization temperature of the stabilized HIPPE. Meanwhile, at a concentration of 1.2%, HIPPE has the best cohesive property and stability against delamination due to weakened mobility. In conclusion, A/S-SPIG was proved excellent HIPPE stabilized particle.