Encapsulation of Lactobacillus casei in quince seed gum-alginate beads to produce a functional synbiotic drink powder by agro-industrial by-products and freeze-drying

Efficiency of freeze- and spray-dried microbial preparation as active dried starter culture in kombucha fermentation

BACKGROUND

Kombucha is a widely consumed fermented beverage produced by fermenting sweet tea with a symbiotic culture of bacteria and yeast (SCOBY). The dynamic nature of microbial communities in SCOBY may pose challenges to production scale-up due to unpredictable variations in microbial composition. Using identified starter strains is a novel strategy to control microorganism composition, thereby ensuring uniform fermentation quality across diverse batches. However, challenges persist in the cultivation and maintenance of these microbial strains. This study examined the potential of microencapsulated kombucha fermentation starter cultures, specifically Komagataeibacter saccharivorans, Levilactobacillus brevis and Saccharomyces cerevisiae, through spray-drying and freeze-drying.

RESULTS

Maltodextrin and gum arabic-maltodextrin were employed as carrier agents. Our results revealed that both spray-dried and freeze-dried samples adhered to physicochemical criteria, with low moisture content (2.18-7.75%) and relatively high solubility (65.75-87.03%) which are appropriate for food application. Freeze-drying demonstrated greater effectiveness in preserving bacterial strain viability (88.30-90.21%) compared to spray drying (74.92-78.66%). Additionally, the freeze-dried starter strains demonstrated similar efficacy in facilitating kombucha fermentation, compared to the SCOBY group. The observations included pH reduction, acetic acid production, α-amylase inhibition and elevated total polyphenol and flavonoid content. Moreover, the biological activity, including antioxidant potential and in vitro tyrosinase inhibition activity, was enhanced in the same pattern. The freeze-dried strains exhibited consistent kombucha fermentation capabilities over a three-month preservation, regardless of storage temperature at 30 or 4 °C.

CONCLUSION

These findings highlight the suitability of freeze-dried starter cultures for kombucha production, enable microbial composition control, mitigate contamination risks and ensure consistent product quality. © 2024 Society of Chemical Industry.

Novel Encapsulation Approaches in the Functional Food Industry: With a Focus on Probiotic Cells and Bioactive Compounds

Bioactive substances can enhance host health by modulating biological reactions, but their absorption and utilization by the body are crucial for positive effects. Encapsulation of probiotics is rapidly advancing in food science, with new approaches such as 3D printing, spray-drying, microfluidics, and cryomilling. Co-encapsulation with bioactives presents a cost-effective and successful approach to delivering probiotic components to specific colon areas, improving viability and bioactivity. However, the exact method by which bioactive chemicals enhance probiotic survivability remains uncertain. Co-crystallization as an emerging encapsulation method improves the physical characteristics of active components. It transforms the structure of sucrose into uneven agglomerated crystals, creating a porous network to protect active ingredients. Likewise, electrohydrodynamic techniques are used to generate fibers with diverse properties, protecting bioactive compounds from harsh circumstances at ambient temperature. Electrohydrodynamic procedures are highly adaptable, uncomplicated, and easily expandable, resulting in enhanced product quality and functionality across various food domains. Furthermore, food byproducts offer nutritional benefits and technical potential, aligning with circular economy principles to minimize environmental impact and promote economic growth. Hence, industrialized nations can capitalize on the growing demand for functional foods by incorporating these developments into their traditional cuisine and partnering with businesses to enhance manufacturing and production processes.

Seed mucilage-based advanced carrier systems for food and nutraceuticals: fabrication, formulation efficiency, recent advancement, challenges, and perspectives

Seed mucilages are potential sources of natural polysaccharides. They are biodegradable, biocompatible, sustainable, renewable, and safe for human consumption. Due to the desirable physicochemical and functional properties (e.g. gelling, thickening, stabilizing, and emulsifying), seed mucilages have attracted extensive attention from researchers for utilization as a promising material for the development of advanced carrier systems. Seed mucilages have been utilized as natural polymers to improve the properties of various carrier systems (e.g. complex coacervates, beads, nanofibers, and gels) and for the delivery of diverse hydrophilic and lipophilic compounds (e.g. vitamins, essential oils, antioxidants, probiotics, and antimicrobial agents) to achieve enhanced stability, bioavailability, bioactivity of the encapsulated molecules, and improved quality attributes of food products. This review highlights the recent progress in seed mucilage-based carrier systems for food and nutraceutical applications. The main contents include (1) sources, extraction methods, and physicochemical and functional characteristics of seed mucilages, (2) application of seed mucilages for the development of advanced carrier systems, (3) major issues associated with carrier fabrication, and (4) mechanisms of carrier development, latest improvements in carrier formulation, carrier efficiency in the delivery of bioactive agents, and application in food and nutraceuticals. Furthermore, major challenges and future perspectives of seed mucilage-based carriers for a commercial application are discussed.

Stimuli-responsive glucuronoxylan polysaccharide from quince seeds for biomedical, food packaging, and environmental applications

Mucilage is a gelatinous mixture of polysaccharides secreted from the seed coat and/or pericarp of many plant seeds when soaked in water. Mucilage affected seed germination while maintaining hydration levels during scarcity. Cydonia oblonga (quince) seeds are natural hydrocolloids extruding biocompatible mucilage mainly composed of polysaccharides. Quince seed mucilage (QSM) has fascinated researchers due to its applications in the food and pharmaceutical industries. On a commercial scale, QSM preserved the sensory and physiochemical properties of various products such as yogurt, desserts, cakes, and burgers. QSM is responsive to salts, pH, and solvents and is mainly investigated as edible coatings in the food industry. In tablet formulations, modified and unmodified QSM as a binder sustained the release of various drugs such as cefixime, capecitabine, diclofenac sodium, theophylline, levosulpiride, diphenhydramine, metoprolol tartrate, and acyclovir sodium. QSM acted as a reducing and capping agent to prepare nanoparticles for good antimicrobial resistance, photocatalytic characteristics, and wound-healing potential. The present review discussed the extraction optimization, chemical composition, stimuli-responsiveness, and viscoelastic properties of mucilage. The potential of mucilage in edible films, tissue engineering, and water purification will also be discussed.

Tailoring silk fibroin hydrophilicity and physicochemical properties using sugar alcohols for medical device coatings

This study explores the modification of silk fibroin films for hydrophilic coating applications using various sugar alcohols. Films, prepared via solvent casting, incorporated glycerol, sorbitol, and maltitol, revealing distinctive transparency and UV absorption characteristics based on sugar alcohol chemical structures. X-ray diffraction confirmed a silk I to silk II transition influenced by sugar alcohols. Glycerol proved most effective in enhancing the β-sheet structure. The study also elucidated a conformational shift towards a β-sheet structure induced by sugar alcohols. Silk fibroin-sugar alcohol blind docking and sugar alcohol-sugar alcohol blind docking investigations were conducted utilizing the HDOCK Server. The computer simulation unveiled the significance of size and hydrogen bonding characteristics inherent in sugar alcohols, emphasizing their pivotal role in influencing interactions within silk fibroin matrices. Hydrophilicity of ozonized silicone surfaces improved through successful coating with silk fibroin films, particularly glycerol-containing ones, resulting in reduced contact angles. Strong adhesion between silk fibroin films and ozonized silicone surfaces was evident, indicating robust hydrogen bonding interactions. This comprehensive research provides crucial insights into sugar alcohols' potential to modify silk fibroin film crystalline structures, offering valuable guidance for optimizing their design and functionality, especially in silicone coating applications.

Improving the survival of Lactobacillus plantarum FZU3013 by phase separated caseinate/alginate gel beads

The phase separation behavior of mixed solution of caseinate (Cas) and alginate (Alg) was investigated. Lactobacillus plantarum FZU3013 was encapsulated using 4 % Cas/1 % Alg gel beads with a phase-separated structure. The bacteria were predominantly distributed in the Alg-rich continuous phase. The use of 4 % Cas/1 % Alg beads resulted in higher encapsulation efficiency for L. plantarum FZU3013 compared to 1 % Alg beads. After 5 weeks of storage at 4 °C, the viable count in 4 % Cas/1 % Alg beads was 8.3 log CFU/g, which was 1.1 log CFU/g higher than that of the 1 % Alg beads. When 1 % Alg beads of the smallest size were subjected to in vitro digestion, no viable bacteria could be detected at the end of the digestion, whereas the 4 % Cas/1 % Alg beads of the smallest size had a viable count of 3.9 log CFU/g. When the size of the 4 % Cas/1 % Alg beads was increased to 1000 μm, the viable count was 7.0 log CFU/g after digestion. The results of infrared spectroscopy and zeta potential indicated that hydrogen bonding and electrostatic interactions between caseinate and alginate reinforced the structure of the gel beads and improved the protection for L. plantarum FZU 3013.

Ingredients, structure and reconstitution properties of instant powder foods and the potential for healthy product development: a comprehensive review

Instant foods are widely presented in powder forms across different food segments, which potentially can be formulated with functional or beneficial compounds to provide health benefits. Many reconstituted instant powder foods form colloidal suspensions with complex structures. However, designing instant powder food could be challenging due to the structural complexity and high flexibility in formulation. This review proposed a new classification method for instant powder foods according to the solubility of ingredients and the structure of the reconstituted products. Instant powder foods containing insoluble ingredients are discussed. It summarised challenges and current advances in powder treatments, reconstitution improvement, and influences on food texture and structure to facilitate product design in related industries. The characteristics and incorporation of the main ingredients and ingredients with health benefits in product development were reviewed. Different products vary significantly in the ratios of macronutrients. The macronutrients have limited solubility in water. After being reconstituted by water, the insoluble components are dispersed and swell to form colloidal dispersions with complex structures and textures. Soluble components, which dissolve in the continuous phase, may facilitate the dispersing process or influence the solution environment. The structure of reconstituted products and destabilising factors are discussed. Both particle and molecular structuring strategies have been developed to improve wettability and prevent the formation of lumps and, therefore, to improve reconstitution properties. Various types of instant food have been developed based on healthy or functional ingredients and exhibit positive effects on the prevention of non-communicable diseases and overall health. Less processed materials and by-products are often chosen to enhance the contents of dietary fibre and phenolic compounds. The enrichment of phenolic compounds, dietary fibres and/or probiotics tend to be simultaneous in plant-based products. The process of the ingredients and the formulation of products must be tailored to design the desired structure and to improve the reconstitution property.

Nanocoating of lactic acid bacteria: properties, protection mechanisms, and future trends

Lactic acid bacteria (LAB) is a type of probiotic that may benefit intestinal health. Recent advances in nanoencapsulation provide an effective strategy to protect them from harsh conditions via surface functionalization coating techniques. Herein, the categories and features of applicable encapsulation methods are compared to highlight the significant role of nanoencapsulation. Commonly used food-grade biopolymers (polysaccharides and protein) and nanomaterials (nanocellulose and starch nanoparticles) are summarized along with their characteristics and advances to demonstrate enhanced combination effects in LAB co-encapsulation. Nanocoating for LAB provides an integrity dense or smooth layer attributed to the cross-linking and assembly of the protectant. The synergism of multiple chemical forces allows for the formation of subtle coatings, including electrostatic attractions, hydrophobic interactions, π-π, and metallic bonds. Multilayer shells have stable physical transition properties that could increase the space between the probiotic cells and the outer environment, thus delaying the microcapsules burst time in the gut. Probiotic delivery stability can be promoted by enhancing the thickness of the encapsulated layer and nanoparticle binding. Maintenance of benefits and minimization of nanotoxicity are desirable, and green synthesized nanoparticles are emerging. Future trends include optimized formulation, especially using biocompatible materials, protein or plant-based materials, and material modification.

Upcycling of black currant pomace for the production of a fermented beverage with Wolfiporia cocos

Pomace as a side stream from black currant juice production is mostly discarded, even though it is rich in nutrients like protein, fiber, sugars, anthocyanins, polyphenols, and other secondary metabolites. Fungi from the division of Basidiomycota have a great enzymatic toolbox to recycle these complex mixtures of nutrients. In particular, the edible medicinal fungus Wolfiporia cocos has been described as a suitable biocatalyst to form pleasant aroma compounds in fermentation processes. Therefore, medium optimization, upscaling, and filtration were performed to produce a beverage based on black currant pomace fermented with W. cocos. A trained panel described the beverage as highly pleasant, reminiscent of honey, flowers and berries with a well-balanced sour and sweet taste. The flavor compounds linalool (citrus), geraniol (flowery), phenylacetic acid (honey), methyl phenylacetate (honey), eugenol (clove), and 2-phenylethanol (rose) were produced during fermentation and the concentrations exceeded their respective odor thresholds. The produced beverage was evaluated with 8.0 ± 1.4 from 10 for the question of whether panelists would buy the product. Fungal fermentation with the edible fungus W. cocos enabled the production of a highly pleasant beverage and additionally may reduce waste by using pomace and table sugar as sole ingredients.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05677-4.

Formulation, Statistical Optimization, and In Vivo Pharmacodynamics of Cydonia oblonga Mucilage/Alginate Mucoadhesive Microspheres for the Delivery of Metformin HCl

In recent years, attention has shifted toward the utilization of natural polymers for encapsulation and sustained release of health-hazardous drugs. The purpose of this work is to define and assess the sustained delivery potential and mucoadhesive potential of a Cydonia oblonga mucilage (COM) and sodium alginate (Na-Alg)-constituting polymeric delivery carrier of antidiabetic drugs with a specific end goal to retain metformin HCl in the stomach while expanding the drug's bioavailability. Metformin HCl was encapsulated in mucoadhesive microspheres by an ionic gelation method. Polymers with different combinations were tried, and the resulting mucoadhesive COM/Na-Alg microspheres were assessed for particle size (mm) PS/Y₁, drug encapsulation efficiency DEE (%)/Y₂, and in vitro percentage cumulative drug release R_12h/Y₃ using Drug Design Expert software version 10. The response surface methodology by a 3²-central composite design predicted optimal synthesis parameters for the microspheres to be 295 mg for COM and 219 mg for Na-Alg. An optimized formulation was prepared under these conditions and used to evaluate the micrometric properties, morphology and structural characteristics, swelling behavior, in vitro drug release, and kinetics. Acute toxicity studies were carried out on blank COM/Na-Alg microspheres to deem them safe for in vivo studies. The DEE (%) was calculated to be 85.8 ± 1.67, whereas scanning electron microscopy (SEM) showed a coarse surface with characteristic wrinkles and cracks with an optical microscopic particle size of 0.96 ± 2.45. The ex vivo tests showed great mucoadhesive properties and good swelling behavior with pH-responsive drug release and a significant reduction in in vivo blood glucose levels. The results advocated the use of optimized microspheres to enhance the bioactivity with a possible dose reduction, making it less symptomatic, reducing the expense of the treatment, and subsequently facilitating better patient compliance.

Effects of thermal treatments on the characterisation of microencapsulated chlorophyll extract of Caulerpa racemosa

Caulerpa racemosa is a macroalga that has a green pigment, that is, chlorophyll. Chlorophyll is highly sensitive to damage during heat processing. In the present work, C. racemosa chlorophyll extract was microencapsulated with fish gelatine and Arabic gum coatings, using a freeze-drying technique, to protect against heat damage. The microcapsules were subjected to high temperatures (120, 140, and 160°C) for 5 h. The protective effect of microcapsules on chlorophyll stability was assessed by measuring chlorophylls a and b degradation, total phenolic content, antioxidant activity, functional group analysis, colour, particle size, and morphology via scanning electron microscopy. Chlorophyll b significantly decreased by 87.78% in comparison with chlorophyll a (61.49%) during heating; the characteristic green colour of chlorophyll changed to brownish-green following heat exposure. However, chlorophyll was still present in the microcapsules as detected by the presence of the functional group C=O bond at 1600 nm wavelength. The heat treatment did not affect microcapsule particle size and morphology. Particle size distribution ranged from 91.58 to 112.51 µm, and the microcapsule was flake-shaped. The activation energy of chlorophyll a was 19336.96 kJ/mol·K; this was higher than that of chlorophyll b, which was 1780.53 kJ/mol·K. Based on the results, microcapsules produced using fish gelatine and Arabic gum as coating materials were able to protect chlorophyll in C. racemosa extract from heat damage.

Process optimization for simultaneous production of phenolic acids and enzymes with high transfructosylation activity in cupuassu (Theobroma grandiflorum) residue by submerged fermentation with Aspergillus carbonarius

Cupuassu (Theobroma grandiflorum) generates a large amount of waste, which can be better used to obtain products with high added value through biotechnological processes. Thus, the present study aimed to obtain optimized conditions for the simultaneous production of phenolic acids, invertases and transferases enzymes in cupuassu residue with Aspergillus carbonarius. The main methodologies used to select the variables that influence the system were a Plackett-Burman design, followed by a Central Composite Rotational Design. The optimal conditions were use of 17.3% sucrose, 5.1% residue and 4.6% yeast extract to produce 2204.89 ± 5.75 mg GAE/100 g, 39.84 ± 2.08 U/mL of hydrolytic activity, 168.09 ± 3.81 U/mL of transfructosylation activity and 4.23 ± 0.19 of transfructosylation and hydrolytic activity ratio. Among the phenolic acids identified by the UFLC-DAD system, there was an increase of 148.17% in gallic acid and 205.51% in protocatechuic acid. The antioxidant activities also showed changes after fermentation, with an increase of 350% for the ABTS assay, 51.97% for FRAP, 22.65% for ORAC and 16.03% for DPPH. To the best of our knowledge, this is the first time that cupuassu residue is fermented with Aspergillus carbonarius to obtain invertases and transferases enzymes and phenolic acids.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05418-z.

The encapsulation strategy to improve the survival of probiotics for food application: From rough multicellular to single-cell surface engineering and microbial mediation

The application of probiotics is limited by the loss of survival due to food processing, storage, and gastrointestinal tract. Encapsulation is a key technology for overcoming these challenges. The review focuses on the latest progress in probiotic encapsulation since 2020, especially precision engineering on microbial surfaces and microbial-mediated role. Currently, the encapsulation materials include polysaccharides and proteins, followed by lipids, which is a traditional mainstream trend, while novel plant extracts and polyphenols are on the rise. Other natural materials and processing by-products are also involved. The encapsulation types are divided into rough multicellular encapsulation, precise single-cell encapsulation, and microbial-mediated encapsulation. Recent emerging techniques include cryomilling, 3D printing, spray-drying with a three-fluid coaxial nozzle, and microfluidic. Encapsulated probiotics applied in food is an upward trend in which "classic probiotic foods" (yogurt, cheese, butter, chocolate, etc.) are dominated, supplemented by "novel probiotic foods" (tea, peanut butter, and various dry-based foods). Future efforts mainly include the effect of novel encapsulation materials on probiotics in the gut, encapsulation strategy oriented by microbial enthusiasm and precise encapsulation, development of novel techniques that consider both cost and efficiency, and co-encapsulation of multiple strains. In conclusion, encapsulation provides a strong impetus for the food application of probiotics.

Physical, Chemical, and Antioxidant Characterization of Nano-Pomegranate Peel and Its Impact on Lipid Oxidation of Refrigerated Meat Ball

Pomegranate peel (CPP), enriched with bioactive constituents, had potent antioxidant features. Therefore, it is worth finding out functional and antioxidant features of the nanoscale pomegranate peel. The nanoscale of pomegranate peel was prepared by ultrafine grinding in a ball mill for 45 min (NPP45) and 90 min (NPP90). The physical (SEM, TEM, FTIR, and XRD) and chemical characteristics (phenolics, flavonoids, DPPH scavenging activity, FRAP, and reducing power) of nanoparticles were studied. The quality aspects of cold stored (5 ± 2°C) meatballs formulated with 0.5% (W/W) of nano-peel powder were evaluated. Similarly, FTIR spectra and XRD patterns were recorded for nano and crude pomegranate peel samples. Generally, grinding the crude peel for 45 and 90 min enhanced its scavenging activity, reducing power, FRAP, total phenolic, and flavonoid by a range of 12.58 to 20.37 and 20.57% to 35.18%, respectively. The addition of crude/nanosized peel to the meat ball diminish ( $p<0.05$ ) formation of thiobarbituric acid (TBARS), peroxide (PV), and volatile nitrogen and kept the sensory attributes up to 9 days of cold storage. No significant differences were noticed in PV and TBARS of meatballs formulated with 0.5% NPP90 and 0.1% BHT, which suggests the potential use of nanoscale pomegranate peel as natural substitutes to BHT in meat products.

From Pomegranate Byproducts Waste to Worth: A Review of Extraction Techniques and Potential Applications for Their Revalorization

The food industry is quite interested in the use of (techno)-functional bioactive compounds from byproducts to develop ‘clean label’ foods in a circular economy. The aim of this review is to evaluate the state of the knowledge and scientific evidence on the use of green extraction technologies (ultrasound-, microwave-, and enzymatic-assisted) of bioactive compounds from pomegranate peel byproducts, and their potential application via the supplementation/fortification of vegetal matrixes to improve their quality, functional properties, and safety. Most studies are mainly focused on ultrasound extraction, which has been widely developed compared to microwave or enzymatic extractions, which should be studied in depth, including their combinations. After extraction, pomegranate peel byproducts (in the form of powders, liquid extracts, and/or encapsulated, among others) have been incorporated into several food matrixes, as a good tool to preserve ‘clean label’ foods without altering their composition and improving their functional properties. Future studies must clearly evaluate the energy efficiency/consumption, the cost, and the environmental impact leading to the sustainable extraction of the key bio-compounds. Moreover, predictive models are needed to optimize the phytochemical extraction and to help in decision-making along the supply chain.

Effective encapsulation of reuterin-producing Limosilactobacillus reuteri in alginate beads prepared with different mucilages/gums

The mainly aim of this study was to use mucilaginous solutions obtained from tamarind, mutamba, cassia tora, psyllium and konjac powdered to encapsulate reuterin-producing Limosilactobacillus reuteri in alginate beads by extrusion technique. In the particles were determined the bacterial encapsulation efficiency, cell viability during storage and survival under simulated gastric and intestinal conditions. Moreover, the reuterin production, its entrapment into the beads and the influence on viability of encapsulated microorganism were evaluated. Scanning electron microscopy and Fourier Transform Infrared spectroscopy were employed to characterize the produced particles. The beads showed a relatively spherical shape with homogenous distribution of L. reuteri. The use of gums and mucilages combined with alginate improved the encapsulation efficiency (from 93.2 to 97.4%), the viability of encapsulated bacteria during refrigerated storage (especially in prolonged storage of 20, 30 and 60 days) and the survival after exposure to gastric and enteric environments (from 67.7 to 76.6%). The L. reuteri was able to produce reuterin via bioconversion of glycerol in the film-forming solutions, and the entrapment of the metabolite was improved using konjac, mutamba and tamarind mucilaginous solutions in the encapsulation process (45, 44.57 and 41.25%, respectively). Thus, our findings confirm the great potential of these hydrocolloids to different further purposes, enabling its application as support material for delivery of chemical or biological compounds.

Seed gum-based delivery systems and their application in encapsulation of bioactive molecules

Now-a-days, the food/pharma realm faces with great challenges for the application of bioactive molecules when applying them in free form due to their instability in vitro/in vivo. For promoting the biological and functional properties of bioactive molecules, efficient delivery systems have played a pivotal role offering a controlled delivery and improved bioavailability/solubility of bioactives. Among different carbohydrate-based delivery systems, seed gum-based vehicles (SGVs) have shown great promise, facilitating the delivery of a high concentration of bioactive at the site of action, a controlled payload release, and less bioactive loss. SGVs are potent structures to promote the bioavailability, beneficial properties, and in vitro/in vivo stability of bioactive components. Here, we offer a comprehensive overview of seed gum-based nano- and microdevices as delivery systems for bioactive molecules. We have a focus on structural/functional attributes and health-promoting benefits of seed gums, but also strategies involving modification of these biopolymers are included. Diverse SGVs (nano/microparticles, functional films, hydrogels/nanogels, particles for Pickering nanoemulsions, multilayer carriers, emulsions, and complexes/conjugates) are reviewed and important parameters for bioactive delivery are highlighted (e.g. bioactive-loading capacity, control of bioactive release, (bio)stability, and so on). Future challenges for these biopolymer-based carriers have also been discussed. HighlightsSeed gum-based polymers are promising materials to design different bioactive delivery systems.Seed gum-based delivery systems are particles, fibers, complexes, conjugates, hydrogels, etc.Seed gum-based vehicles are potent structures to promote the bioavailability, beneficial properties, and in vitro/in vivo stability of bioactive components.

Effects of polysaccharide-based coatings on postharvest storage life of grape: measuring the changes in nutritional, antioxidant and phenolic compounds

In this study, the effect of postharvest coating of chitosan (CH) 1.0%, gum ghatti (GG) 1.0% and combine of each other, on nutritional properties, phenolic compounds and antioxidant capacity of ‘Rishbaba’ grape (Vitis vinifera L.) was evaluated during 60 days of cold storage. Coating with 1.0% CH solely or in combined with 1.0% GG caused a considerable retain in grape berries phenolic acids compared to uncounted samples after the 60th day. Moreover, flavanols and flavan-3-ols content were found to be highest in fruits treated with CH and GG complex. At the end of storage, the highest concentrations of delphinidin, cyanidin, pelargonidin and malvidin were found in grapes coated with CH in combined with GG. The highest antioxidant capacity and the lowest polyphenol oxidase activity were related to samples treated with CH and GG complex. Also, the combination effects of CH and GG at 1.0% were the most efficient for soluble sugars and polyamines accumulation. The CH + GG complex had the best result on prohibiting grape fungal decay. The results showed a research increase of this complex that these are a strong potential strategy to produce coatings for improving the postharvest quality of fruits and could be considered as a good solution to preserve many components of them.

Alginate/Fish Gelatin-Encapsulated Lactobacillus acidophilus: A Study on Viability and Technological Quality of Bread during Baking and Storage

In the present study, Lactobacillus acidophilus LA-5 was microencapsulated in sodium alginate, followed by fish gelatin coating (0.5, 1.5, and 3%). The survival of L. acidophilus in bread before and after encapsulation in alginate/fish gelatin during the baking and 7-day storage was investigated. Moreover, the effect of alginate/fish gelatin-encapsulated L. acidophilus on the technological properties of bread (hardness, staling rate, water content, oven spring, specific volume, and internal texture structure) was evaluated. Compared with control (free bacteria), encapsulated L. acidophilus in alginate/fish gelatin showed an increase in the viability of bread until 2.49 and 3.07 log CFU/g during baking and storage, respectively. Good viability of (10⁶ CFU/g) for probiotic in encapsulated L. acidophilus in alginate/fish gelatin (1.5 and 3%, respectively) after 4-day storage was achieved. Fish gelatin as a second-layer carrier of the bacteria had a positive effect on improving the technical quality of bread. Furthermore, the staling rate of bread containing encapsulated L. acidophilus alginate/fish gelatin 0.5, 1.5, and 3% decreased by 19.5, 25.8, and 31.7%, respectively. Overall, the findings suggested encapsulation of L. acidophilus in alginate/fish gelatin capsule had great potential to improve probiotic bacteria’s survival during baking and storage and to serve as an effective bread enhancer.

Characterization of functional sweetened condensed milk formulated with flavoring and sugar substitute

In the present study, the effect of sugar replacement and enrichment with cinnamon extract (CE) on the physicochemical, functional, and organoleptic properties of sweetened condensed milk (SCM) and the production of flavored functional dairy dessert was investigated. The results demonstrated that by adding CE (0.5 and 1%) and fructose sugar (50 and 100% replacement) in the formulation containing maltodextrin, the physicochemical, functional, and organoleptic properties of SCM samples were improved. However, adding fructose and CE at the maximum concentration increased the acidity, particle size, redness (a), yellowness (b) and decreased the lightness (L), viscosity, and sensory scores of the SCM samples (p < .05). Scanning electron microscopy images demonstrated that as the fructose level increased, the number of cavities increased, while the size of the cavities decreased (p < .05). Microstructure analysis also showed that the application of CE increased the density of the structure in the SCM samples. However, the SCM samples formulated with maltodextrin, 0.5% CE, and 50% fructose substitution were identified as optimal samples. Evaluation of the functional properties of SCM formulated with 0.5% CE revealed that the total phenolic content (TPC) and DPPH radical scavenging activity were in the range of 139.21-143.24 mg GAE / g and 50.12%-52.01%, respectively.