Analysis on the printability and rheological characteristics of bigel inks: Potential in 3D food printing

Improvement of 3D printing age-friendly brown rice food on rough texture, swallowability, and in vitro digestibility using fermentation properties of different probiotics

Probiotics can promote the balance of the intestinal microbial community and enhance the biological activity of food. They are beneficial to the health of elderly people. Therefore, five different probiotics (4% of the total weight) were added to pasted brown rice to study the printability, swallowability, and digestibility of fermented inks (at 40 °C for 10 h). The results showed that probiotics reduced the apparent viscosity and resistance to deformation of brown rice inks. The inks with Lactobacillus bulgaricus (LB), Bifidobacterium longum (BL), and Lactiplantibacillus plantarum (LP) had better printing properties and finer appearances. Probiotics significantly reduced the adhesiveness, gumminess, and hardness of inks but had little effect on cohesiveness. LB, Streptococcus thermophilus (ST), and LP were categorized as having class 4 consistency with easy-to-swallow characteristics. The growth and multiplication of probiotics detached the internal structure of brown rice inks and reduced the relative crystallinity. They also modulated the nutrient content and flavor components by producing short-chain fatty acids, and improved the digestion of starch.

Direct-ink-writable nanocellulose ternary hydrogels via one-pot gelation with alginate and calcium montmorillonite

Nanocellulose hydrogels are promising to replace synthetic ones for direct ink writing (DIW)-based 3D printing biobased applications. However, less gelation strength and low solid content of the hydrogels limit the printability and subsequent fidelity of the dried object. Herein, a biobased, ternary DIW hydrogel ink is developed by one-pot gelation of cellulose nanofibrils (CNF), sodium alginate (SA), and Ca-montmorillonite (Ca-MMT) via in situ ionic crosslinking. The addition of Ca-MMT into CNF/SA formulation simultaneously increases the solid content and gelation strength of the hydrogel. The resultant hydrogels exhibit shape recovery after compression. The optimal CNF concentration in the hydrogel is 1.2 wt%, enabling the highest compressive mechanical performance of the scaffolds. A series of complex, customized shapes with different curvatures and three-dimensional structures (e.g., high-curvature letters, pyramids, human ears, etc.) can be printed with high fidelity before and after drying. This study opens an avenue on preparing nanocellulose-based DIW hydrogel inks using one-pot gelation of the components, which offers a solution to combine DIW-based 3D printing with biobased hydrogel inks, towards diverse biobased applications.

Recent research and applications in lipid-based food and lipid-incorporated bioink for 3D printing

Three-dimensional (3D) printing, as an emerging digital production technology, has recently been receiving increasing attention in food processing. It is important to understand the effect of key ingredients of food materials on the printing, which makes it possible to achieve a wider range of structures using few nozzles and to provide tailored nutrition and personalization. This comprehensive review delves into the latest research on 3D-printed lipid-based foods, encompassing a variety of products such as chocolate, processed cheese, as well as meat. It also explores the development and application of food bioinks that incorporate lipids as a pivotal component, including those based on starch, protein, oleogels, bigels, and emulsions, as well as emulsion gels. Moreover, this review identifies the current challenges and presents an outlook on future research directions in the field of 3D food printing, especially the research and application of lipids in food 3D printing.

Nondestructive frozen protein ink: Antifreeze mechanism, processability, and application in 3D printing

Antifreeze peptide (AFP) including in frozen protein ink is an inevitable trend because AFP can make protein ink suitable for 3D printing after freezing. AFP-based surimi ink (ASI) was firstly investigated, and the AFP significantly enhanced 3D printability of frozen surimi ink. The rheological and textural results of ASI show that the τ0, K, and n values are 321.14 Pa, 2.2259 × 105 Pa·sn, and 0.19, respectively, and the rupture strength of the 3D structure is up to 217.67 g. Circular dichroism, intermolecular force, and differential scanning calorimeter show ASI has more undenatured protein after freezing when compared that surimi ink (SI), which was denatured, and the α-helix changed to a β-sheet due to the destruction of hydrogen bonds and the exposure of hydrophobic groups. The water distribution, water holding capacity, and microstructure indicate that ASI effectively binds free water after freezing, while SI has weak water binding capacity and a large amount of free water is formed. ASI is suitable for 3D printing, and can print up to 40.0 mm hollow isolation column and 50.0 mm high Wuba which is not possible with SI. The application of AFP provides guidance for 3D printing frozen protein ink in food industry.

X-ray diffraction and its emerging applications in the food industry

X-ray diffraction (XRD) is an analytical technique that has found several applications focusing on the identification of crystal structure, space groups, plane, and orientation, in addition to qualitative and quantitative phase identification, and polymorphism behavior. An XRD diffractogram pattern/Bragg's peak can also provide valuable information that can be used for various food applications. While this review details the fundamental principles of XRD, the types of XRD systems, instrumentation, and the components thereof, the focus is to serve as a structured resource on explored applications of XRD in food, majorly revolving around food quality and safety. While recent studies relevant to the field are highlighted, leads for futuristic prospects are presented. With its unique approach, the XRD analysis can prove to be a rapid, robust, and sensitive nondestructive approach to food quality evaluation. Recent reports indicate its scope for nonconventional applications such as the assessment of 3D printability of foods, ice crystal formation, and screening food adulterants. Studies also highlight its scope to complement or replace conventional food quality testing approaches that involve the usage of chemicals, extensive sample preparation procedures, derivatization steps and demand long testing times.

Hydrogel delivery systems of functional substances for precision nutrition

Hydrogel delivery systems based on polysaccharides and proteins have the ability to protect functional substances from chemical degradation, control/target release, and increase bioavailability. This chapter summarizes the recent progress in the utilization of hydrogel delivery systems for nutritional interventions. Various hydrogel delivery systems as well as their preparation, structure, and properties are given. The applications for the encapsulation, protection, and controlled delivery of functional substances are described. We also discuss their potential and challenges in managing chronic diseases such as inflammatory bowel disease, obesity, liver disease, and cancer, aiming at providing theoretical references for exploring novel hydrogel delivery systems and their practical prospects in precise nutritional interventions.

Applications of physical and chemical treatments in plant-based gels for food 3D printing

Extrusion-based three-dimensional (3D) printing has been extensively studied in the food manufacturing industry. This technology places particular emphasis on the rheological properties of the printing ink. Gel system is the most suitable ink system and benefits from the composition of plant raw materials and gel properties of multiple components; green, healthy aspects of the advantages of the development of plant-based gel system has achieved a great deal of attention. However, the relevant treatment technologies are still only at the laboratory stage. With a view toward encouraging further optimization of ink printing performance and advances in this field, in this review, we present a comprehensive overview of the application of diverse plant-based gel systems in 3D food printing and emphasize the utilization of different treatment methods to enhance the printability of these gel systems. The treatment technologies described in this review are categorized into three distinct groups, physical, chemical, and physicochemical synergistic treatments. We comprehensively assess the specific application of these technologies in various plant-based gel 3D printing systems and present valuable insights regarding the challenges and opportunities for further advances in this field.

O1/W/O2 double emulsion gels based on nanoemulsions and Pickering particles for co-encapsulating quercetin and cyanidin: A functional fat substitute

An O1/W/O2 double emulsion gel, as a functional fat substitute and based on nanoemulsions and hydrophobic Pickering particles, is prepared by two-step emulsification to co-encapsulate hydrophilic cyanidin and hydrophobic quercetin. Nanoemulsions loading quercetin are fabricated by Tween-80 and combining high-speed and high-pressure emulsification. Phytosterol nanoparticles stabilize the W-O2 interface of the secondary emulsion to load cyanidin in the W phase. The concentration of Tween-80 is optimized as 0.3% by the droplet size and viscosity of nanoemulsions. The structural stability of double emulsion gels will be weakened along with the increase of nanoemulsions, showing lower modulus and encapsulation efficiency (EE) and bigger droplets. In double emulsion gels, the EE of quercetin and cyanidin reaches 93% and 85.6%, respectively. Analysis of molecular interaction indicates that Tween-80 would decrease the in-situ hydrophobicity of phytosterol nanoparticles by hydrogen bonding adsorption, thereby weakening the emulsification. The pH-chromic 3D printing of double emulsion gels is designed according to the pH sensitivity of cyanidin. Texture profile analysis is performed to test the textural properties of 3D-printed objects. The simulated digestion is conducted on double emulsion gels. The double emulsion gel with fewer nanoemulsions is beneficial for protecting quercetin and improving the delivery due to the higher structural stability, while that with more nanoemulsions is conducive to the digestion of cyanidin and camellia oil due to weakened semi-solid properties. This double emulsion gel further simulates fat tissues by co-encapsulating hydrophilic and hydrophobic substances, promoting the application of fat substitutes in the food industry.

A novel edible solid fat substitute: Preparation of biphasic stabilized bigels based on glyceryl monolaurate and gellan gum

Solid fats contribute to a delicate and pleasant flavor for food, but its excessive intake increases the risk of cardiovascular disease. Bigel is considered a promising solid fat substitute as it significantly reduces fat content while meeting consumer demands for food flavor and a balanced diet. In this study, bigels were prepared by mixing glyceryl monolaurate-based oleogel (10 wt%) and gellan gum-based hydrogel (0.8 wt%) at ratios of 1:3, 1:1, and 3:1. The microscopic results indicated that the oleogel/hydrogel ratios influenced the structure of bigels, forming oil-in-water, bi-continuous, and water-in-oil bigels with the increase of oleogel proportion, respectively. All bigels presented a semi-solid structure dominated by elasticity, and their hardness, gumminess, chewiness, and cohesiveness increased with the enhancement of hydrogel proportion. Among them, the bigels (S25:L75 and S25:H75) prepared with an oleogel/hydrogel ratio of 1:3 showed excellent freeze-thaw stability, maintaining an oil holding capacity of >95 % after three freeze-thaw cycles. Meanwhile, they also presented good oxidative stabilities, where the peroxide values and malondialdehyde contents were below 0.07 g/100 g and 1.5 mg MDA/kg at 12 d, respectively. Therefore, S25:L75 and S25:H75 are expected to be green, low-cost, healthy, and sustainable alternatives to solid fats.

Time-temperature indicator of hydroxyethyl cellulose ink labels for assessing pork freshness

Pork is widely consumed worldwide, and many consumers now utilize sensory evaluation techniques to determine the freshness of pork when buying it. A color-changing ink label utilizing bromocresol purple (BCP) and N-hydroxyphthalimide (NHPI) had been created to help consumers better and more rapidly determine the freshness of pork while it is stored. The ink was easy to prepare and could be readily transferred to A4 paper using screen printing technology. This study delved deeper into the impact of hydroxyethyl cellulose (HEC) on the functional properties of inks to enhance printing performance. The experiment demonstrated that a 1 % mass fraction of HEC improved thixotropy and facilitated the even distribution of ink on A4 paper, as confirmed by scanning electron microscopy. Screen-printed labels with varying concentrations displayed distinct color change rates when stored at different temperatures, indicating their capability to assess pork freshness. FT-IR, laboratory, and stability tests verified the ink's exceptional color change capabilities and printing attributes. An analysis using the Arrhenius equation revealed a substantial synergistic effect between BCP and NHPI, resulting in improved sensitivity and accuracy of the ink. This study offers a practical and feasible method to monitor the storage quality of pork effectively.

Development and characterization of hydrogel-in-oleogel (bigel) systems and their application as a butter replacer for bread making

BACKGROUND

Butter has been widely used in bakery products and it contains high level of saturated fats. However, excessive consumption of saturated fats would increase the risk of chronic disease. This study was to fabricate water-in-oil (W/O) type bigels as butter replacers to improve the quality attributes of breads.

RESULTS

A stable water-in-oil (W/O) type bigel system was fabricated based on mixed oleogelators (rice bran wax and glycerol monostearate) and sodium alginate hydrogel. The ratios of oleogel to hydrogel could significantly affect the stability, microstructure and rheological properties of bigels. All of the bigels exhibited solid-like properties, with increased oleogel fractions, and the network structure of bigel became more compact and orderly with smaller sodium alginate gel particles. Meanwhile, the viscoelastic modulus and firmness of bigel increased, contributing to a higher stability. The bigel dough exhibited lower gel strength and relatively higher extensibility compared to the butter dough. Regardless of oleogel fractions, all the bigel produced bread with a higher specific volume and softer texture than the butter bread. When the oleogel fractions was less than 80%, increasing the oleogel fractions was more beneficial for improving the specific volume, softness and fluffy structure of bread.

CONCLUSION

W/O type bigel as butter replacers showed great potential in improving the appearance, structure and textural properties of bread. © 2023 Society of Chemical Industry.

Effect of insoluble dietary fiber on printing properties and molecular interactions of 3D-printed soy protein isolate-wheat gluten plant-based meats

Insoluble dietary fiber (IDF) has been characterized to prevent chronic diseases and improve gastrointestinal health, and it has been added to 3D printing plant-based meats (PM) to enhance texture and increase nutritional properties. Therefore, the aim of this study was to investigate the effects of IDF on 3D printing properties and molecular interactions of soy protein isolate (SPI) - wheat gluten (WG) PM. Without the participation of IDF, PM appeared to collapse. When the IDF concentration increased from 0 to 10 %, PM displayed good printing properties, water holding capacity, tensile strength, and elongation at break were increased. Tensile strength and elongation at break reached a maximum at 10 % IDF, and clearly similar results were found for texture attribute indices such as hardness, gumminess, chewiness, and cohesiveness after cooking. All printing inks exhibited shear-thinning behavior and solid-like viscoelasticity, but the structural recovery properties of 3D-printed PM deteriorated when the IDF content was over 10 %. Intermolecular forces indicated that the addition of IDF enhanced the disulfide bonds so that 10 % IDF presented better printing properties. These results indicated the potential for developing PM with dietary fiber functionality through 3D printing technology.

Recent advances in 3D printing properties of natural food gels: Application of innovative food additives

Recent advances in 3D printing technology have provided a new avenue for food manufacturing. However, one challenge in 3D printing food is the limited availability of printable materials that can mimic the properties of real food. This review focused on the various 3DFP methodologies, as well as the reinforcement of natural food gel for improving printing features in 3D printed food. Also covered is the use of hydrogel-based 3D printing in the development of 3D printed food. Different 3D printing techniques can be employed to print hydrogel-based inks, each with its advantages and limitations. 3D printing of food using hydrogel-based inks has potential for customized food products development. In summary, the utilization of hydrogel-based inks in 3D printing offers a promising avenue for the development of customized food products. Although there are still challenges to overcome, such as improving the printability and mechanical properties of hydrogel-based inks, the potential benefits of this technology make it an exciting area of research.

3D Printing of smart labels with curcumin-loaded soy protein isolate

A two-step method for preparing smart labels that can monitor food freshness through color change is presented. The conventional casting method for such labels is not cost-effective, as it uses organic solvents and requires additional cutting processes. Our method is more eco-friendly and customizable, as it uses water as the sole solvent and 3D printing as the fabrication technique. First, curcumin was encapsulated with soy protein isolate (SPI) by a pH-driven method involving hydrogen bonding and hydrophobic interactions. Subsequently, the SPI-curcumin complex was blended with gelatin to create a printable ink. The ink has suitable rheological properties for extrusion, with a yield stress of 400-600 Pa and a viscosity of 122.93-142.82 Pa·s at the optimal printing temperature. The complex modulus of the ink increases to above 2 × 103 Pa when cooled to 25 °C, indicating rapid gel formation. The application of these smart labels to minced meat demonstrated their ability to reflect its freshness by transitioning from yellow to red. Furthermore, the printability and mechanical properties of the labels can be adjusted by changing the glycerol/water ratio. This innovative approach is a promising solution for producing environmentally friendly and customizable smart labels for food freshness monitoring.

Edible polysaccharide-based oleogels and novel emulsion gels as fat analogues: A review

Polysaccharide-based oleogels and emulsion gels have become novel strategies to replace solid fats due to safe and plentiful raw material, healthier fatty acid composition, controllable viscoelasticity, and more varied nutrition/flavor embedding. Recently, various oleogelation techniques and novel emulsion gels have been reported further to enrich the potential of polysaccharides in oil structuring, in which a crucial step is to promote the formation of polysaccharide networks determining gel properties through different media. Meanwhile, polysaccharide-based oleogels and emulsion gels have good oil holding, nutrient/flavor embedding, and 3D food printability, and their applications as fat substitutes have been explored in foods. This paper comprehensively reviews the types, preparation methods, and mechanisms of various polysaccharide-based oleogels and emulsion gels; meanwhile, the food applications and new trends of polysaccharide-based gels are discussed. Moreover, some viewpoints about potential developments and application challenges of polysaccharide-based gels are mentioned. In the future, polysaccharide-based gels may be flexible materials for customized nutritional foods and molecular gastronomy. However, it is still a challenge to select the appropriate oleogels or emulsion gels to meet the requirements of the products. Once this issue is addressed, oleogels and emulsion gels are anticipated to be used widely.

Stabilization of capsanthin in physically-connected hydrogels: Rheology property, self-recovering performance and syringe/screw-3D printing

This work presented a facile way of stabilizing capsanthin by physically-connected soft hydrogels via utilizing specially-structured polysaccharides, and investigated rheological properties, self-recovering mechanism and 3D printability. The functionalized hydrogels demonstrated excellent color quality including redness, yellowness index and hue with great storage stability and visual perception. The soft hydrogels fabricated with properly sequenced polyglyceryl fatty acid esters, β-cyclodextrin, chitosan, and low-content capsanthin possessed outstanding extrudability, appropriate yield stress, reasonable mechanical strength, rational elasticity and structure sustainability. Furthermore, the self-recovering properties based on hydrogen bonds, host-guest interactions and electrostatic interactions were revealed and verified by structural, zeta potential, micro-morphological, zeta potential, thixotropic, creep-recovery, and macroscopic/microscopic characterizations. Along with excellent antioxidant performance, the subsequent 3D printing onto bread with complex models elucidated the high geometry accuracy and great sensory characters. The sequenced physically-connected hydrogels incorporated with capsanthin can provide new insights on stabilizing hydrophobic biomaterials and developing the 3D printed exquisite, innovative food.

Encapsulation of lutein in gelatin type A/B-chitosan systems via tunable chains and bonds from tweens: Thermal stability, rheologic property and food 2D/3D printability

Lutein could be stabilized in gelatin type A/B-chitosan systems by different polyoxyethylene sorbitan fatty acid esters (tweens) via tunable chains and bonds, and the homogeneous system held potential in food 2D/3D printing. During encapsulation of lutein in gelatin-chitosan matrix complexes, tween 40, tween 60 and tween 80 assisted in the excellent centrifugation stability, freeze-thaw stability, chemical stability as well as thermal stability. The tweens contained systems also possessed excellent rheological properties, including shearing thinning property, self-supporting characteristics, and favorable thixotropy. Especially, tween 80 performed well in facilitating the stability and rheological properties of systems with uniform micromorphology due to its long alkyl chains and carbon-carbon double bonds (two sp2 hybridized C-atoms) (from FTIR, XRD, SEM, etc.); and gelatin type B illustrated higher protection effects on lutein because of its strong electrostatic interaction with chitosan. The optimal systems could work as edible ink for 2D/3D printing on food with great UV-irradiation stability and high definition. Surimi could be modified by the optimal complex and possessed excellent shear-thinning property, proper yield stress, low dependence on frequency and stable structure, which was successfully applied for innovative 3D printing with sophisticated shapes. The practical food 2D/3D printing (like bread and surimi) demonstrated high potential in food creation and food innovation.

Bigels as Delivery Systems: Potential Uses and Applicability in Food

Bigels have been mainly applied in the pharmaceutical sector for the controlled release of drugs or therapeutics. However, these systems, with their intricate structures, hold great promise for wider application in food products. Besides their classical role as carrier and target delivery vehicles for molecules of interest, bigels may also be valuable tools for building complex food structures. In the context of reducing or even eliminating undesirable (but often highly functional) food components, current strategies often critically affect food structure and palatability. The production of solid fat systems that are trans-fat-free and have high levels of unsaturated fatty acids is one of the challenges the food industry currently faces. According to recent studies, bigels can be successfully used as ingredients for total or partial solid fat replacement in complex food matrices. This review aims to critically assess current research on bigels in food and pharmaceutical applications, discuss the role of bigel composition and production parameters on the characteristics of bigels and further expand the use of bigels as solid fat replacers and functional food ingredients. The hydrogel:oleogel ratio, selected gelators, inclusion of surfactants and encapsulation of molecules of interest, and process parameters (e.g., temperature, shear rate) during bigel production play a crucial role in the bigel's rheological and textural properties, microstructure, release characteristics, biocompatibility, and stability. Besides exploring the role of these parameters in bigel production, future research directions for bigels in a food context are explored.

Fabrication of Pickering emulsions stabilized by citrus pectin modified with β-cyclodextrin and its application in 3D printing

Pickering emulsions stabilized by polysaccharide particles have received increasing attention because of their potential applications in three-dimensional (3D) printing. In this study, the citrus pectins (citrus tachibana, shaddock, lemon, orange) modified with β-cyclodextrin (β-CD) were used to stabilize Pickering emulsions reaching the requirements of 3D printing. In terms of pectin chemical structure, the steric hindrance provided by the RG I regions was more conducive to the stability of the complex particles. The modification of pectin by β-CD provided the complexes a better double wettability (91.14 ± 0.14°-109.43 ± 0.22°) and a more negative ζ-potential, which was more beneficial for complexes to anchor at oil-water interface. In addition, the rheological properties, texture properties and stability of the emulsions were more responsive to the ratios of pectin/β-CD (R_β/C). The results showed that the emulsions stabilized at a φ = 65 % and a R_β/C = 2:2 achieved the requirements (shear thinning behavior, self-supporting ability, and stability) of 3D printing. Furthermore, the application in 3D printing demonstrated that the emulsions under the optimal condition (φ = 65 % and R_β/C = 2:2) displayed excellent printing appearance, especially for the emulsions stabilized by β-CD/LP particles. This study provides a basis for the selection of polysaccharide-based particles to prepare 3D printing inks which may be utilized in food manufacturing.

Tailoring a novel ovalbumin emulsion gel for stability improvement and functional properties enhancement: Effect of oil phase structure changes by beeswax

This study aimed to form a novel emulsion gel (EG) through structured oil phase of natural component beeswax (BW), together with ovalbumin (OVA), and to investigate the mechanism of its formation and stabilization in terms of microstructure and processing properties. Confocal laser scanning microscopy (CLSM) demonstrated that the EG formed a continuous double network structure since the superior crystallinity of the oil phase was given by BW. Fourier transform infrared spectroscopy (FT-IR) illustrated that the acylation of the phenolic hydroxyl group in BW with an amide bond in OVA, increased the hydrogen bonding of EG. Furthermore, the immobilization of the oil phase results in better thermal and freeze-thaw stability of EG. Finally, EG was used as a curcumin delivery system, and the presence of BW significantly improved its adaptability to multiple environmental factors. In summary, our study would provide valuable ideas for developing the design of finely structured functional food.

Bigels constructed from hybrid gelator systems: bulk phase-interface stability and 3D printing

In this study, edible bigels with different ratios of beeswax-based oleogel to gellan gum-based hydrogel were developed and characterized. Gellan gum formed a 3D network in water through hydrogen bonding. Beeswax formed a crystalline network in the oil phase, which prevented the flow of oil and formed an oleogel. The position of the droplets is fixed by the crystallization of glycerol monostearate (GMS) at the interface. Bigels with different oleogel contents presented different types of O/W (oleogel content was less than 62%), semi-bicontinuous (oleogel content was 62-68%), and W/O bigels (oleogel content was more than 70%), respectively. Rheological experiments showed bigels had a shear thinning ability, which was suitable for extrusion 3D printing. Then the applicability of 3D printing was studied and it was found that the self-supporting ability of bigels became stronger with the increase of oleogel content. Functional pigments were incorporated into the bigel inks, making the 3D printing product nutrient-rich and color customizable. These results would favor guiding the preparation of bigels with adjusted physical properties and delicate structures for 3D food printing to satisfy the personal desire of consumers.

The oxidative quality of bi-, oleo- and emulgels and their bioactives molecules delivery

During recent years, the applicability of bi-, oleo- and emulgels has been widely studied, proving several advantages as compared to conventional fats, such as increasing the unsaturated fat content of products and being more sustainable for temperate regions as compared to tropical fats. Moreover, these alternative fat systems improve the nutritional profile, increase the bioavailability of bioactive compounds, and can be used as preservation films and markers for the inactivation of pathogens, while in 3D printing facilitate the obtaining of superior food products. Furthermore, bi-, oleo- and emulgels offer food industries efficient, innovative, and sustainable alternatives to animal fats, shortenings, margarine, palm and coconut oil due to the nutritional improvements. According to recent studies, gels can be used as ingredients for the total or partial replacement of saturated and trans fats in the meat, bakery and pastry industry. The evaluation of the oxidative quality of this gelled systems is significant because the production process involves the use of heat treatments and continuous stirring where large amounts of air can be incorporated. The aim of this literature review is to provide a synthesis of studies to better understand the interaction of components and to identify future improvements that can be applied in oil gelling technology. Generally, higher temperatures used in obtaining polymeric gels, lead to more oxidation compounds, while a higher concentration of structuring agents leads to a better protection against oxidation. Due to the gel network ability to function as a barrier against oxidation factors, gelled matrices are able to provide superior protection for the bioactive compounds. The release percentage of bioactive molecules can be regulated by formulating the gel matrix (type and concentration of structuring agents and type of oil). In terms of food products, future research may include the use of antioxidants to improve the oxidative stability of the reformulated products.

Time-specific ultrasonic treatment of litchi thaumatin-like protein inhibits inflammatory response in RAW264.7 macrophages via NF-κB and MAPK transduction pathways

The pro-inflammation activity of litchi thaumatin-like protein (LcTLP) led to be responsible for the occurrence of adverse reactions after excessive consumption of litchi. This study aimed to characterize the changes in the structure and inflammatory activity of LcTLP induced by ultrasound treatment. Significant molecular structure of LcTLP changes occured at 15 min ultrasound treatment, and then tended to recover with subsequent treatment. Secondary structure (α-helices decreased from 17.3% to 6.3%), tertiary structure (the maximum endogenous fluorescence intensity decreased), and microstructure (mean hydrodynamic diameter reduced from 4 μm to 50 nm) of the LcTLP treated for 15 min (LT15) were significantly affected, which led to the inflammatory epitope of LcTLP (domain II and V-cleft) unfolded. In vitro, LT15 had a significant anti-inflammatory response, which inhibited NO production and had the best effect at 50 ng/mL in RAW264.7 macrophages (73.24%). Moreover, proinflammatory cytokines such as tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) secretion and mRNA expression levels were also significantly lower compared with untreated LcTLP (p < 0.05). Western blot further confirmed that the expressions of IκB-α, p65, p38, ERK and JNK reduced markedly (p < 0.05), which indicated LT15 inhibited the inflammatory response through NF-κB and MAPK transduction pathways. Overall, it can be hypothesized that LT15 exposed to low frequency ultrasonic fields have a direct effect on the protein surface structure and thus on the entry of LT15 into cells, making 15-minute ultrasound treatment potentially useful in reducing the pro-inflammatory properties of litchi or related liquid products.

Fabrication of anthocyanin–rich W1/O/W2 emulsion gels based on pectin–GDL complexes: 3D printing performance

The stability of anthocyanin-rich W₁/O/W₂ double emulsions prepared with Nicandra physalodes (Linn.) Gaertn. Seeds pectin was investigated, including droplet sizes, ζ-potential, viscosity, color, microstructures and encapsulation efficiency. Furthermore, the gelation behavior, rheological behavior, texture behavior and three-dimensional (3D) printing effects of the W₁/O/W₂ emulsion gels induced with Glucono-delta-lactone (GDL) were studied. The L*, b*, ΔE, droplet sizes and ζ-potential of the emulsions were gradually increased, while other indicators were gradually decreased during 28 days of storage under 4 ℃. The storage stability of sample under storage at 4 ℃ was higher than 25 ℃. The G' of W₁/O/W₂ emulsion gels gradually boosted with increased GDL addition, and reached the highest after the addition of 1.6 % GDL. In creep-recovery sweep, the minimum strain of 1.68 % and the highest recovery rate of 86 % were also found for the emulsion gels with 1.6 % GDL. Accordingly, the models "KUST", hearts, flowers printed by emulsion gels after 60 min addition of 1.6 % GDL had the best printing effects. The W₁/O/W₂ emulsion gels based on pectin-GDL complexes exhibited good performance in protecting anthocyanins and suggested as a potential ink for food 3D printing.

Self-assembled pH-stable gellan/κ-carrageenan bigel: Rheological studies and viscosity prediction by neural network

The current study focused on analysing and predicting the effect of physicochemical parameters on the rheological properties of the novel polysaccharide-based bigel. This is the first study to report a bigel fabricated entirely from polysaccharides and develop a neural network to predict the modulation in its rheology. This bi-phasic gel had gellan and κ-carrageenan as the constitutive elements in the aqueous and the organic phase, respectively. Physicochemical studies revealed the influence of organogel in eliciting high mechanical strength and smooth surface morphology to the bigel. Furthermore, variation in physiochemical parameters indicated the bigel's inertness towards change in pH of the system. However, variation in temperature led to a noticeable change in the rheology of the bigel. It was observed that after gradual decline, the bigel regained its original viscosity as the temperature increased beyond 80 °C. Insights from this study can pave way for the development of highly-stable polysaccharide bigels.

Polysaccharide-Based Edible Gels as Functional Ingredients: Characterization, Applicability, and Human Health Benefits

Nowadays, edible materials such as polysaccharides have gained attention due to their valuable attributes, especially gelling property. Polysaccharide-based edible gels (PEGs) can be classified as (i) hydrogels, (ii) oleogels and bigels, (iii) and aerogels, cryogels and xerogels, respectively. PEGs have different characteristics and benefits depending on the functional groups of polysaccharide chains (e.g., carboxylic, sulphonic, amino, methoxyl) and on the preparation method. However, PEGs are found in the incipient phase of research and most studies are related to their preparation, characterization, sustainable raw materials, and applicability. Furthermore, all these aspects are treated separately for each class of PEG, without offering an overview of those already obtained PEGs. The novelty of this manuscript is to offer an overview of the classification, definition, formulation, and characterization of PEGs. Furthermore, the applicability of PEGs in the food sector (e.g., food packaging, improving food profile agent, delivery systems) and in the medical/pharmaceutical sector is also critically discussed. Ultimately, the correlation between PEG consumption and polysaccharides properties for human health (e.g., intestinal microecology, "bridge effect" in obesity, gut microbiota) are critically discussed for the first time. Bigels may be valuable for use as ink for 3D food printing in personalized diets for human health treatment. PEGs have a significant role in developing smart materials as both ingredients and coatings and methods, and techniques for exploring PEGs are essential. PEGs as carriers of bioactive compounds have a demonstrated effect on obesity. All the physical, chemical, and biological interactions among PEGs and other organic and inorganic structures should be investigated.

Preparing a Personalized Meal by Using Soy, Cricket, and Egg Albumin Protein Based on 3D Printing

Recently, personalized meals and customized food design by means of 3D printing technology have been considered over traditional food manufacturing methods. This study examined the effects of different proteins (soy, cricket, and egg albumin protein) in two concentrations (3% and 5%) on rheological, textural, and 3D printing characteristics. The textural and microstructural properties of different formulations were evaluated and compared. The addition of soy and cricket protein induced an increase in yield stress (τ₀), storage modulus (G′), and loss modulus (G″) while egg albumin protein decreased these parameters. The textural analysis (back extrusion and force of extrusion) demonstrated the relationship between increasing the amount of protein in the formula with an improvement in consistency and index of viscosity. These values showed a straight correlation with the printability of fortified formulas. 3D printing of the different formulas revealed that soy and cricket proteins allow the targeting of complex geometry with multilayers.

Novel Formulation of Bigel-Based Vegetable Oil Spreads Enriched with Lingonberry Pomace

In this study, bigel-based vegetable oil spreads with lingonberry pomace addition were prepared. The impact of gelatin, agar and collagen was examined as structuring agents as was the effect of lecithin concentration (0.5, 1.0, 1.5%). Prepared systems were evaluated by physical and chemical stability and structural and rheological properties. It was found that all bigel formulations were self-standing with no signs of phase separation at ambient temperature immediately after preparation and after two weeks of storage at 4 °C temperature. The lingonberry pomace addition affected grainy structure formation with homogenous and uniform distribution of fiber particles throughout the bigel matrix and it also altered the colour of the bigels toward a purple-red. Texture, rheological properties and colour of the spread formulations were affected by the type of the structuring agent as well as the lecithin concentration. The presence of the lingonberry pomace enhanced the resistance of the bigel samples to the oxidation process and it was confirmed by the DPPH^• inhibition, peroxide value and oxipress test. Overall, the formulated bigel-based spreads could be beneficial and had a potential application as healthier fat spreads and be a source of dietary fibers (11 g of fibre per 100 g of the spread).