Pickering emulsions stabilized by zein particles and their complexes and possibilities of use in the food industry: A review

Production, characterization, and application of zein-polyphenol complexes and conjugates: A comprehensive review

The corn protein zein has several advantages, such as low production cost, excellent biodegradability, good biocompatibility, and low allergenicity. However, the application of zein in the food industry is limited by its high hydrophobicity. To increase the functionality of zein and meet the diverse requirements of food systems, researchers have explored several methods to form complexes or conjugates through noncovalent or covalent interactions, respectively, with polyphenols. This paper comprehensively reviews the formation mechanisms, preparation methods, and influencing factors of zein-polyphenol complexes and conjugates. In addition, the paper presents the techniques used to characterize zein-polyphenol complexes and conjugates and their various new functional properties and bioactivities including water solubility, emulsification activity, in vitro antioxidant activity and antibacterial activity, as well as factors that affect these properties. Furthermore, the potential uses of these compounds in the food sector and future research areas are discussed.

Recent advances in the plant protein-polyphenol interactions for the stabilization of emulsions

Proteins from plant sources including legumes, cereals and oilseeds are gaining attention due to their suitability for sustainable production, functionality, and positive consumer perception. On the other hand, polyphenols (PPs) are receiving considerable attention as natural ingredients in the human diet due to their potent antioxidant and anti-inflammatory properties. Recent studies indicate that the emulsifying properties of plant proteins (PLPs) can be improved after modification through covalent and/or non-covalent interactions with PPs due to the changes in the conformation and/or the surface chemistry of the proteins. Complexes formed between PLPs-PPs can serve as innovative ingredients for developing novel food products with modified textural properties. Also, Pickering emulsions, multiple emulsions, multilayer emulsions, nanoemulsions, and high internal phase emulsions can be stabilized by such systems to deliver bioactive compounds. This paper reviews the most recent research on the PLP-PP interactions and their role in the stabilization of various emulsion-based systems. A special emphasis is given to modifying the structure and functionality of PLPs and PPs. The challenges and opportunities of applying PLP-PP interactions in emulsion-based systems are also highlighted.

Chitosan-zein-icariin complexes modulate double emulsion phase transitions to potentiate absorption efficiency

This study developed a chitosan-zein-icariin ternary complex through reversed-phase precipitation to stabilize double emulsions using one-step emulsification method. Results indicated that icariin and chitosan-zein formed spherical microstructures via the rearrangement of hydrogen bonding networks and hydrophobic interactions. All complexes exhibited pale-yellow color and demonstrated single and uniform size distribution. The thermal stability and interfacial contact angle of the complexes significantly decreased with the incorporation of icariin. The prepared double emulsion microstructures displayed multi-chambered configurations due to polarity differences, solidifying during cold storage as a result of phase shifts in coconut oil, which led to an increased storage modulus. While the double emulsion microstructure showed enhanced storage stability, droplet size increased markedly when subjected to NaCl and temperature variations. Following in-vitro digestion, the double emulsion microstructure disintegrated; average particle size decreased, resulting in the release of icariin from the ternary complex during intestinal phases, thereby enhancing bioaccessibility. Furthermore, it was observed that icariin within the ternary complex influenced absorption efficacy based on its concentration levels, as evidenced by Caco-2 cell studies, though this effect was greater than that observed for the zein-icariin binary complex. The results of this study provide a theoretical foundation for efficient delivery systems involving hydrophobic multivariate complexes.

Prolamin-pectin complexes: Structural properties, interaction mechanisms and food applications

Prolamin, a class of plant protein mainly derived from grains, and pectins, complex-structured polysaccharides, are natural biological macromolecules with versatile functional properties. The interactions between prolamins and pectin have been widely studied and applied, demonstrating that both covalent and non-covalent interactions play pivotal roles in the formation of prolamin-pectin complexes. These interactions impart exceptional physicochemical and functional properties to the complexes. This review also details the main applications of prolamin-pectin complexes, including emulsions, nanoparticles, hydrogels and films. The similarities in their reaction principles are based on the interaction of complexes that improve their physicochemical and functional properties, while the difference lies in the specific modes of action, involving the emulsifying properties, self-assembly properties, gelling properties and film-forming properties of prolamin and pectin. By delving into the intricate mechanisms underlying prolamin-pectin interactions and their diverse applications in the food industry, this review offers valuable insights for advancing the development and utilization of these complexes.

Colloidal lignin particle reinforces the stability of Pickering emulsions prepared with zein nanoparticle

Zein nanoparticle (ZNP) is at the forefront of research on Pickering emulsions, valued for its self-assembling and surfactant-free nature. Nevertheless, its emulsion stability is undermined by inadequate amphiphilicity. Colloidal lignin particle (CLP), characterized by its antithetical charge and amphiphilic nature, appears the promising for augmenting the stability of ZNP-based emulsion. This study meticulously investigated the impact of CLP on the colloidal properties and emulsifying performance of ZNP. The results revealed that electrostatic interactions between ZNP and CLP significantly mitigated the charge of ZNP and improved its hydrophilic/lipophilic balance. Under optimized conditions (1.0 wt% particle concentration, pH 4.0, 50% oil content), CLP notably reduced droplet sizes (41-225 μm) and enhanced the stability of ZNP-based Pickering emulsion, particularly at ZNP/CLP ratios of 6:4 and 5:5. In nature, CLP improved the stability ZNP-based Pickering emulsions via increased interfacial adsorption, enhanced steric hindrance, and reinforced viscous structure.

Novel reaction systems for catalytic synthesis of structured phospholipids

Phospholipids are distinctive, adaptable molecules that are crucial to numerous biological systems. Additionally, their various architectures and amphiphilic characteristics support their unrivaled crucial functions in scientific and industrial applications. Due to their enormous potential for use in the fields of medicine, food, cosmetics, and health, structured phospholipids, which are modified phospholipids, have garnered increased attention. Traditional extraction methods, however, are pricy, resource-intensive, and low-yielding. The process of enzyme-catalyzed conversion is effective for producing several types of structured phospholipase. However, most frequently employed catalytic procedures involve biphasic systems with organic solvents, which have a relatively large mass transfer resistance and are susceptible to solvent residues and environmental effects due to the hydrophobic nature of phospholipids. Therefore, the adoption of innovative, successful, and environmentally friendly enzyme-catalyzed conversion systems provides a new development route in the field of structured phospholipids processing. Several innovative catalytic reaction systems are discussed in this mini-review, including aqueous-solid system, mixed micelle system, water-in-oil microemulsion system, Pickering emulsion system, novel solvent system, three-liquid-phase system, and supercritical carbon dioxide solvent system. However, there is still a glaring need for a thorough examination of these systems for the enzymatic synthesis of structural phospholipids. In terms of the materials utilized, applicability, benefits and drawbacks, and comparative effectiveness of each system, this research establishes further conditions for the system's selection. To create more effective biocatalytic processes, it is still important to build green biocatalytic processes with improved performance. KEY POINTS: • The latest catalytic systems of phospholipase D are thoroughly summarized. • The various systems are contrasted, and their traits are enumerated. • Different catalytic systems' areas of applicability and limitations are discussed.

Pickering emulsion gel of polyunsaturated fatty acid-rich oils stabilized by zein-tannic acid green nanoparticles for storage and oxidation stability enhancement

HYPOTHESIS

Poor storage stability and oxidative deterioration are the common drawbacks of edible oils rich in polyunsaturated fatty acids (PUFAs). We hypothesized that the natural zein/tannic acid self-assembly nanoparticles (ZT NPs) could be employed as stabilizers to anchor at the oil-water interface, thus constructing Pickering emulsion gel (PKEG) system for three types of PUFA-rich oils, soybean oil (SO), fish oil (FO) and cod liver oil (CLO), to improve the storage and oxidation stability.

EXPERIMENTS

ZT NPs were prepared by the anti-solvent coprecipitation method, and the three-phase contact angle, FT-IR, and XRD were mainly characterized. To observe the shell-core structure and oil-water interface details of SO/FO/CLO PKEGs by confocal laser scanning microscope and cryo-scanning electron microscope. Accelerated oxidation of FO was performed to assess the protective effect of PKEG on lipids.

FINDINGS

The SO, FO, and CLO PKEGs stabilized by 2 % ZT NPs, with oil fraction (φ = 0.5-0.6), were obtained. PKEGs show high viscoelasticity, clear shell-core structure spatial network structure, and ideal storage stability. Under accelerated oxidation, the degree of oxidative rancidity of FO PKEG was obviously lower than that of free FO. Overall, this work opens up new possibilities for using natural PKEG to prevent oxidative deterioration and prolong the shelf-life of PUFA-rich oils.

Pickering Emulsion Stabilized by Different Concentrations of Whey Protein-Cress Seed Gum Nanoparticles

Nanoparticles based on food-grade materials are promising materials to develop Pickering emulsions for food applications. Initially, this study focuses on the development of nanoparticles through the utilization of a soluble complex of whey protein concentrate (WPC) and cress seed gum (CSG), which were modified by calcium chloride (CaCl2) as a cross-linker. The response surface methodology was used to investigate the impact of different concentrations of WPC (1-4% w/v), CSG (0-1% w/v), and CaCl2 (1-3 mM) on particle size, polydispersity index (PDI), and Zeta potential. The optimum conditions for the production of CSG-WPC nanoparticles (WPC-CSG NPs) were 0.31% (w/v) CSG, 1.75% (w/v) WPC, and 1.69 mM CaCl2, resulting in nanoparticles with average size of 236 nm and Zeta potential of -22 mV. Subsequently, oil-in-water (O/W) Pickering emulsions were produced with different concentrations of WPC-CSG NPs in optimum conditions. The contact angles of the WPC-CSG NPs were 41.44° and 61.13° at concentrations of 0.5% and 1%, respectively, showing that NPs are suitable for stabilizing O/W Pickering emulsions. Pickering emulsion viscosity rose from 80 to 500 mPa when nanoparticle concentration increased from 0.5% to 1%. Results also showed that WPC-CSG NPs enable stable O/W Pickering emulsions during storage and thermal treatment, confirming that protein-polysaccharide NPs can provide a sufficient steric hindrance.

High internal phase Pickering emulsions stabilized by Zein-hyaluronic acid conjugate particles and their application in active substances protection

In recent years, active substances have been extensively applied in the fields of food, cosmetics, and pharmaceuticals. However, their preservation and transportation have posed challenges due to issues such as oxidation and photodegradation. This study proposes a method for synthesizing Zein-Hyaluronic Acid (Zein-HA) conjugate particles via the Schiff base reaction, utilizing these conjugate particles to encapsulate and protect active substances within a stable emulsion system. Compared to zein, the modified conjugate particles exhibit significantly improved dispersibility, amphiphilicity, interfacial affinity, and emulsifying properties. Consequently, these particles are capable of stabilizing high internal phase Pickering emulsions with an oil phase volume fraction of up to 80 (v/v)%, thereby enabling the carriage of a higher load of active components. Furthermore, the prepared emulsions demonstrate excellent storage stability, resistance to ionic strength (250-2000 mM NaCl), and outstanding antioxidative characteristics. Moreover, after 8 h of UV light exposure, the retention rates of the active substances (curcumin, astaxanthin, and resveratrol) exceed 60 %. Therefore, these emulsions hold substantial potential to be applied as a carrier system in the food, cosmetics, and pharmaceutical industries.

Study on encapsulation of Lactobacillus plantarum 23-1 in W/O/W emulsion stabilized by pectin and zein particle complex

This study was conducted to develop a W/O/W emulsion encapsulated Lactobacillus plantarum 23-1 (LP23-1) to significantly enhance the survival rate of LP23-1 under simulated digestion and storage conditions. The zein particles and pectin formed a complex through electrostatic interaction and hydrogen bonding. When the proportion of zein particles to pectin was 1:1, the emulsifying stability index (ESI) was 304.17 %. Additionally, when the proportion of the internal aqueous phase to the oil phase was 1:9, the polyglycerol polyricinoleate (PGPR) concentration was 5 %, the proportion of primary emulsion to the external aqueous phase was 5:5, the zein particles concentration was 4 %, and the proportion of zein particles to pectin was 1:1, the encapsulation rate was the highest at 96.27 %. Cryo-scanning electron microscopy and fluorescence microscopy confirmed the morphology of W/O/W emulsion and successful encapsulation of LP23-1. Furthermore, compared with free LP23-1, the W/O/W emulsion encapsulation significantly improved the survival rate of LP23-1 to 73.36 % after simulated gastrointestinal digestion and maintained a high survival rate of 78.42 % during the 35-day storage. The W/O/W emulsion was found to effectively improve the survival rate of LP23-1 during simulated digestion and storage, which has implications for the development of probiotic functional foods with elevated survival rates.

Pectin-based cinnamon essential oil Pickering emulsion film with two-sided differential wettability: A major role in the spatial distribution of microdroplets

Pickering emulsions have attracted much attention as a novel emulsifying technology. This research to explore Zein-Citrus pectin nanoparticles stabilized cinnamon essential oil (CEO) Pickering emulsion (ZCCPEs) for constructing Pickering emulsion edible film (PEF). Unlike traditional research, which focuses on antibacterial and antioxidant activities, our research examined the physical properties of PEF, specifically changes in wettability. The results show that PEF has better transparency and tensile strength than the pectin alone direct emulsion film (PAEF), and the spatial distribution of Pickering emulsion droplets gives different wettability on both sides of PEF. The partially hydrophobic upside has important application value in food packaging. At the same time, the PEF is biodegradable and environmentally non-polluting. The edible film loaded with essential oils, developed based on the Pickering stabilization mechanism in this study, possesses several desirable characteristics for potential used as bioactive packaging films in food applications.

Using kraft lignin nanoparticles for the stabilization of nano/micro wax carriers

Due to its amphiphilic structure, lignin has the potential to stabilize emulsions via adsorption at the oil/water interface. By converting lignin into nanoparticles, we can significantly enhance its emulsion-stabilizing capabilities through a Pickering-type stabilization mechanism. Two essential elements may be modified to fine-tune emulsion stability: the size of the lignin nanoparticles (LNPs) and the physicochemical nature of the lipid phase. In this context, we highlight the behavior and utility of unmodified LNPs in the preparation of Pickering emulsions made up of water and a complex bio-based pharmaceutical-grade wax that can be used for the formulation of lipid carriers. As a proof-of-concept, we employ the developed Pickering emulsions to encapsulate indocyanine green (ICG), an FDA-approved dye commonly used in medical imaging applications. We demonstrate that ultra-small LNPs are well-suited for the colloidal stabilization of pharmaceutical wax ester micro beads. This stabilization does not require any lignin modification. Additionally, we present evidence that our new lipid/lignin hybrid carrier has potential as a new drug delivery system.

Enhancing cellulose-stabilized multiphase/Pickering emulsions systems: A molecular dynamics perspective

Cellulose stabilized multiphase systems (CSMS) have garnered significant attention due to their ultra-stabilization mechanism and vast potential across different fields. CSMS have found valuable applications in scientific disciplines, including Food Science, Pharmaceutical Science, Material Science, and related fields, owing to their beneficial attributes such as sustainability, safety, renewability, and non-toxicity. Furthermore, MPS exhibit novel characteristics that enable multiple mechanisms to produce HIPEs, aerogels, and oleogels revealing undiscovered information. Therefore, to explore the undiscovered phenomena of MPS, molecular level insights using advanced simulation/computational approaches are essential. The molecular dynamics simulation (MDS), play a valuable role in analyzing the interactions of ternary interphase. The MDS have successfully quantified the interactions of MPS by generating, visualizing, and analyzing trajectories. Through MDS, researchers have explored CSMS at the molecular level and advanced their applications in 3D printing, packaging, preparation, drug delivery, encapsulation, biosensors, electronic devices, biomaterials, and energy conservation. This review highlights the remarkable advancements in CSMS over the past five years, along with contributions of MDS in evaluating the relationships that dictate the functionality and properties of CSMS. By integrating experimental and computational methods, we underscore the potential to innovate and optimize these multiphase systems for groundbreaking applications.

High internal phase pickering emulsions stabilized by zein/whey protein nanofibril complexes: Preparation and lycopene loading

High internal phase Pickering emulsions (HIPPEs) prepared from natural polymers have attracted much attention in the food manufactures. However, single zein-stabilized HIPPEs are poorly stable and prone to flocculation near the isoelectric point. To address this issue, in this study, zein and whey protein nanofibrils (WPN) complex nanoparticles (ZWNPs) were successfully prepared using a pH-driven method, and ZWNPs were further used as HIPPEs stabilizers. The results showed that zein and WPN were combined together through hydrogen bonding and hydrophobic interaction to form ZWNPs, and the HIPPEs stabilized by ZWNPs had excellent stability, which could effectively protect the internally encapsulated lycopene and improve the bioaccessibility of lycopene. In conclusion, this study provides a new strategy for the preparation of stable hydrophobic protein-based HIPPEs, represented by zein.

Advances of protein-based emulsion gels as fat analogues: Systematic classification, formation mechanism, and food application

Fat plays a pivotal role in the appearance, flavor, texture, and palatability of food. However, excessive fat consumption poses a significant risk for chronic ailments such as obesity, hypercholesterolemia, and cardiovascular disease. Therefore, the development of green, healthy, and stable protein-based emulsion gel as an alternative to traditional fats represents a novel approach to designing low-fat food. This paper reviews the emulsification behavior of proteins from different sources to gain a comprehensive understanding of their potential in the development of emulsion gels with fat-analog properties. It further investigates the emulsifying potential of protein combined with diverse substances. Then, the mechanisms of protein-stabilized emulsion gels with fat-analog properties are discussed, mainly involving single proteins, proteins-polysaccharides, as well as proteins-polyphenols. Moreover, the potential applications of protein emulsion gels as fat analogues in the food industry are also encompassed. By combining natural proteins with other components such as polysaccharides, polyphenols, or biopolymers, it is possible to enhance the stability of the emulsion gels and improve its fat-analog texture properties. In addition to their advantages in protecting oil oxidation, limiting hydrogenated oil intake, and delivering bioactive substances, protein-based emulsion gels have potential in food 3D printing and the development of specialty fats for plant-based meat.

Zein and tannic acid hybrid particles improving physical stability, controlled release properties, and antimicrobial activity of cinnamon essential oil loaded Pickering emulsions

Pickering emulsion loading essential oil has demonstrated a promising strategy as delivery system in food preservation, but localization in stability and antimicrobial activity limits application. In this study, Pickering emulsions co-loaded with tannic acid and cinnamon essential oil (ZTC) have been developed based on zein and tannic acid complexes (ZT) mediated interfacial engineering. Fourier transform infrared, fluorescence spectroscopy, and molecular docking results indicated tannic acid altered the structural of zein. Interfacial tension results indicated that tannic acid accelerated the adsorbed speed of zein particles by decreased interfacial tension (11.99-9.96 mN/m). ZT5 formed a viscoelastic and dense layer in oil-water interface than that for other ZTs, which improved stability and control release performance of ZTC. Furthermore, the ZTC showed an effective antimicrobial activity against spoilage organisms Pseudomonad paralactis MN10 and Lactobacillus sakei VMR17. These findings provide new insight for developing co-loaded multiple antimicrobial agents within Pickering emulsion as a delivery system.

Effect of zein-pectin composite particles on the stability and rheological properties of gelatin/hydroxypropyl methylcellulose water-water systems

To improve the compatibility of gelatin (GA) and hydroxypropyl methylcellulose (HPMC), we investigated the effects of zein-pectin composite particles (ZCPs) with various zein/pectin ratios (1:0, 1:0.5, 1:1, 1:1.5, and 1:2) on the physical stability, microstructure, and rheological properties of the GA/HPMC water-water systems. With increasing pectin ratio, the particle size of the composite particles increased from 234.53 ± 1.48 nm to 1111.00 ± 26.91 nm, and their zeta potential decreased from 20.60 mV to below -34.77 mV. Macroscopic and microstructure observations indicated that pectin-modified ZCPs could effectively inhibit phase separation behavior between GA and HPMC. Compared to pure HPMC, the GA/HPMC water-water systems possessed a higher viscosity and dynamic modulus at room temperatures but lower gel temperatures (reduction of about 11 %). The viscosity and modulus of the water-water systems increased with increasing pectin ratio in ZCPs. However, the ratio had no impact on the gel-sol (sol-gel) transition temperatures (not statistically significant (P < 0.05)). This study may serve as a reference for advancing the processability of HPMC.

Insight into oil-water interfacial adsorption of protein particles towards regulating Pickering emulsions: A review

Over the past decade, Pickering emulsions (PEs) stabilized by protein particles have been the focus of researches. The characteristics of protein particles at the oil-water interface are crucial for stabilizing PEs. The unique adsorption behaviors of protein particles and various modification methods enable oil-water interface to exhibit controllable regulation strategies. However, from the perspective of the interface, studies on the regulation of PEs by the adsorption behaviors of protein particles at oil-water interface are limited. Therefore, this review provides an in-depth study on oil-water interfacial adsorption of protein particles and their regulation on PEs. Specifically, the formation of interfacial layer and effects of their interfacial characteristics on PEs stabilized by protein particles are elaborated. Particularly, complicated behaviors, including adsorption, arrangement and deformation of protein particles at the oil-water interface are the premise of affecting the formation of interfacial layer. Moreover, the particle size, surface charge, shape and wettability greatly affect interfacial adsorption behaviors of protein particles. Importantly, stabilities of protein particles-based PEs also depend on properties of interfacial layers, including interfacial layer thickness and interfacial rheology. This review provides useful insights for the development of PEs stabilized by protein particles based on interfacial design.

Insights into the preparation of zein nanoparticles by continuous membrane nanoprecipitation

Nanoparticles (NPs) preparation is limited to an exclusive use in batch processes and small-scale formulations. The use of membranes as high-performance micromixers is expected to open new scenarios to overcome limitations of conventional nanoprecipitation system such as stirred tank (ST) nanoprecipitation. The ability of the porous membrane to add uniformly one phase to another and govern their mixing at the membrane interface seems to be an important parameter for obtaining uniform NPs. Inorganic membranes (pore size of 1 μm) were used to carry out membrane nanoprecipitation (MN) to form Zein nanoparticles (ZNPs) at pores level by non-solvent induced phase separation. A systematic study of the preparation of ZNPs in the ST and MN systems was carried out to establish the Ouzo diagram. The influence of zein concentration and solvent to non-solvent ratio on the size and size distribution of ZNPs was also investigated. A wider stable Ouzo zone was obtained with MN than with the ST process. ZNPs size increased from 100 nm up to 700 nm, while maintaining low polydispersity index (PDI < 0.2). The results demonstrate the suitability of MN for the continuous production of ZNPs and open the possibility of scaling up the nanoprecipitation process.

Zein-Based Nanoparticles as Active Platforms for Sustainable Applications: Recent Advances and Perspectives

Nanomaterials, due to their unique structural and functional features, are widely investigated for potential applications in a wide range of industrial sectors. In this context, protein-based nanoparticles, given proteins' abundance, non-toxicity, and stability, offer a promising and sustainable methodology for encapsulation and protection, and can be used in engineered nanocarriers that are capable of releasing active compounds on demand. Zein is a plant-based protein extracted from corn, and it is biocompatible, biodegradable, and amphiphilic. Several approaches and technologies are currently involved in zein-based nanoparticle preparation, such as antisolvent precipitation, spray drying, supercritical processes, coacervation, and emulsion procedures. Thanks to their peculiar characteristics, zein-based nanoparticles are widely used as nanocarriers of active compounds in targeted application fields such as drug delivery, bioimaging, or soft tissue engineering, as reported by others. The main goal of this review is to investigate the use of zein-based nanocarriers for different advanced applications including food/food packaging, cosmetics, and agriculture, which are attracting researchers' efforts, and to exploit the future potential development of zein NPs in the field of cultural heritage, which is still relatively unexplored. Moreover, the presented overview focuses on several preparation methods (i.e., antisolvent processes, spry drying), correlating the different analyzed methodologies to NPs' structural and functional properties and their capability to act as carriers of bioactive compounds, both to preserve their activity and to tune their release in specific working conditions.

Pickering emulsions stabilized by ternary complexes involving curcumin-modified zein and polysaccharides with different charge amounts for encapsulating β-carotene

In this research, zein was modified with curcumin to obtain covalent and non-covalent complexes. They were further covered with polysaccharides (gum arabic or gum karaya) possessing different surface charge amounts to obtain ternary nanoparticles for preparing novel antioxidant Pickering emulsions. The addition of curcumin to the zein-polysaccharide system significantly retarded the UV degradation of the encapsulated β-carotene (maximum retention ∼ 97%) and effectively inhibited the lipid oxidation of the emulsions. In vitro gastrointestinal digestion assays showed that gum karaya significantly delayed the release of free fatty acids, thereby improving the bioaccessibility of β-carotene (the highest bioavailability ∼ 38%). By comparing the performance of the complex particles, the weakly charged polysaccharides were superior to the highly charged ones, while zein-curcumin covalent binding was superior to non-covalent binding in the above experiments. This study provides innovative perspectives on the use of novel Pickering emulsions to provide ideal protection and bioavailability of lipophilic nutraceuticals.

Replacing animal proteins with plant proteins: Is this a way to improve quality and functional properties of hybrid cheeses and cheese analogs?

The growing emphasis on dietary health has facilitated the development of plant-based foods. Plant proteins have excellent functional attributes and health-enhancing effects and are also environmentally conscientious and animal-friendly protein sources on a global scale. The addition of plant proteins (including soy protein, pea protein, zein, nut protein, and gluten protein) to diverse cheese varieties and cheese analogs holds the promise of manufacturing symbiotic products that not only have reduced fat content but also exhibit improved protein diversity and overall quality. In this review, we summarized the utilization and importance of various plant proteins in the production of hybrid cheeses and cheese analogs. Meanwhile, classification and processing methods related to these cheese products were reviewed. Furthermore, the impact of different plant proteins on the microstructure, textural properties, physicochemical attributes, rheological behavior, functional aspects, microbiological aspects, and sensory characteristics of both hybrid cheeses and cheese analogs were discussed and compared. Our study explores the potential for the development of cheeses made from full/semi-plant protein ingredients with greater sustainability and health benefits. Additionally, it further emphasizes the substantial chances for scholars and developers to investigate the optimal processing methods and applications of plant proteins in cheeses, thereby improving the market penetration of plant protein hybrid cheeses and cheese analogs.

Fabrication and characterization of a novel zein/pectin/pumpkin seed oil Pickering emulsion and the effects of myricetin on oxidation stability

In this study, zein/pectin/pumpkin seed oil (PSO) Pickering emulsions (ZPPEs) were fabricated loading with myricetin (MYT), and the quality control methods of oxidation stability were innovatively investigated. The microstructure and particle properties of zein-pectin particles were determined. The zein to pectin ratio of 5:3 and oil phase fraction (φ = 50 %) turned out as the most optimal conditions for the stabilization of myricetin-loaded ZPPEs. The expected oil-in-water emulsion-type structure was confirmed by confocal laser scanning microscopy (CLSM). The internal 3D structure of Pickering emulsions (Lugol's solution improved the water-phase contrast) was imaged by micro-computed tomography (Micro-CT) for the first time. Results showed a sponge like structure of water phase in emulsion with 42 μm as mean droplet size. Light-induced oxidation was evaluated with the PetroOxy method and malondialdehyde (MDA) assays. Encapsuling ZPPEs with MYT could prevent the light induced oxidation, especially, loading of MYT at the core of the emulsion. The analysis of Electronic nose (E-nose) was used to analyze the odor before and after UV-induced oxidation, and showed a good discrimination. This study provided a new approach to prepare ZPPEs with high oxidation stability. Micro-CT, PetroOxy and E-nose could be new methods for characterization and quality assessment of Pickering emulsions.

Characterizations and effects of pectin-coated nanoliposome loaded with Gijavash (Froriepia subpinnata) extract on the physicochemical properties of cheese

In this study, pectin-coated nanoliposomes containing Gijavash extract were used to formulate cheese and evaluate its shelf life, physicochemical, and sensory aspects. The study used a central composite design with three independent variables to prepare the cheese. The results showed that the optimal particle size, zeta potential, encapsulation efficiency, and DPPH radical antioxidant activity were 201.22 nm, -29.33 mV, 61.87%, and 57.54%, respectively. Adding nanoliposomes with varying extract amounts improved pH and lowered acidity in fortified cheeses. Moisture and lipolysis indices also improved after applying nanoliposomes. Sensory evaluation revealed that sensory acceptance was highest in the cheese with 15% extract. The study suggests that adding pectin-coated nanoliposomes containing Gijavash extract to cheese formulations may create novel products and improve their physicochemical properties.

Fabrication of Pickering emulsions stabilized by citrus pectin modified with β-cyclodextrin and its application in 3D printing

Pickering emulsions stabilized by polysaccharide particles have received increasing attention because of their potential applications in three-dimensional (3D) printing. In this study, the citrus pectins (citrus tachibana, shaddock, lemon, orange) modified with β-cyclodextrin (β-CD) were used to stabilize Pickering emulsions reaching the requirements of 3D printing. In terms of pectin chemical structure, the steric hindrance provided by the RG I regions was more conducive to the stability of the complex particles. The modification of pectin by β-CD provided the complexes a better double wettability (91.14 ± 0.14°-109.43 ± 0.22°) and a more negative ζ-potential, which was more beneficial for complexes to anchor at oil-water interface. In addition, the rheological properties, texture properties and stability of the emulsions were more responsive to the ratios of pectin/β-CD (R_β/C). The results showed that the emulsions stabilized at a φ = 65 % and a R_β/C = 2:2 achieved the requirements (shear thinning behavior, self-supporting ability, and stability) of 3D printing. Furthermore, the application in 3D printing demonstrated that the emulsions under the optimal condition (φ = 65 % and R_β/C = 2:2) displayed excellent printing appearance, especially for the emulsions stabilized by β-CD/LP particles. This study provides a basis for the selection of polysaccharide-based particles to prepare 3D printing inks which may be utilized in food manufacturing.

Pickering emulsions stabilized by zein-gallic acid composite nanoparticles: Impact of covalent or non-covalent interactions on storage stability, lipid oxidation and digestibility

Studies have shown that covalent and non-covalent zein-polyphenol complexes exhibit significant differences in structure and properties, but their effects on the characteristics of Pickering emulsions are still unclear. In this study, zein nanoparticles (ZNPs), non-covalent (N-ZGANPs) and covalent (C-ZGANPs) zein-gallic acid nanoparticles were fabricated to investigate the influence of complexation types on the properties of an algal oil-in-water Pickering emulsion. Results indicated that the addition of gallic acid was associated with the decrease of interfacial tension of particles. C-ZGANPs possessed the strongest interfacial adsorption capacity, which contributed to the optimum physical stability of the covalent emulsion during storage. The rheological experiment demonstrated that C-ZGANPs decreased the viscoelasticity of the emulsion, while N-ZGANPs showed the opposite effect. Moreover, the emulsions stabilized by C-ZGANPs significantly delayed the oxidation of the encapsulated algal oil, protected astaxanthin (AST) from heat, as well as increased the bioaccessibility of AST in simulated digestion.

Pickering Emulsion Stabilized by Fish Myofibrillar Proteins Modified with Tannic Acid, as Influenced by Different Drying Methods

A novel food-grade, particles-based Pickering emulsion (PE) was prepared from a marine source. Yellow stripe trevally is an under-utilized species. The use of its muscle protein as solid food-grade particles for the preparation of a Pickering emulsion can be a potential means of obtaining the natural nutritive emulsifier/stabilizer. Fish myofibrillar proteins (FMP) were modified with tannic acid (TA) at varying concentrations (0.125, 0.25, and 0.5%) followed by freeze-drying (FD) or spray-drying (SD). Physicochemical characteristics and emulsifying properties of obtained FMP-TA complexed particles were assessed for structural changes and oil-in-water emulsion stabilization. The addition of TA caused a reduction in surface hydrophobicity and total sulfhydryl content values for either FD-FMP or SD-FMP. Conversely, disulfide bond content was significantly increased, particularly when TA at 0.5% was used (p < 0.05). FTIR, spectrofluorometer, and the protein pattern also confirmed the cross-linking between FMP and TA. SD-FMP modified with 0.5% TA (SD-FMP-0.5TA) rendered the highest emulsifying stability index but had a lowered emulsifying activity index (p < 0.05). Confocal microscopic images, droplet size, and rheological properties revealed that a SD-FMP-0.5TA-stabilized emulsion had higher stability after 45 days of storage than an FD-FMP-0.5TA-stabilized emulsion. Therefore, the SD-FMP-0.5TA complex could be used as a potential food-grade stabilizer/emulsifier for PE with enhanced emulsifying properties.

The physicochemical properties and Pickering emulsifying capacity of acorn starch

In this work, the granule characteristics, functional properties, in-vitro digestibility, antioxidant capacity, and phenolic composition of acorn starch were investigated and compared to those of potato starch and corn starch, and its Pickering emulsifying ability was also evaluated. The results showed that the acorn starch granules were spherical and oval in shape, with a smaller particle size, and the amylose content and crystallinity degree were similar to those of corn starch. However, the acorn starch was difficult to swell, with poor aqueous solubility, though it had a strong gel strength and setback viscosity. Because acorn starch contained more free and bound polyphenols, its resistant starch content after cooking and ABTS and DPPH radical scavenging activities were significantly higher than those of potato starch and corn starch. Acorn starch also exhibited outstanding particle wettability and could stabilize Pickering emulsions. The assessed emulsion showed an outstanding effect for protecting β-carotene against ultraviolet irradiation and was positively correlated with the acorn starch addition amount. The obtained results may serve as a reference for the further development of acorn starch.

Impact of interactions between peanut protein isolate and cellulose nanocrystals on the properties of Pickering emulsions: Rheological properties and physical stabilities

The interactions between cellulose nanocrystals and proteins can regulate the interfacial properties of Pickering emulsions, which plays a leading role in the stabilities of Pickering emulsions. In this work, oil-in-water (O/W) Pickering emulsions with different oil-water ratios were prepared using peanut protein isolate modified by cellulose nanocrystals (PPI/CL-CNCs). The distributions of PPI/CL-CNCs at the oil-water interfaces and the microstructures of Pickering emulsions were observed by CLSM and cryo-SEM. The results showed that stable complexes PPI/CL-CNCs formed thick and dense interface layers on the surface of oil droplets. The results of rheological tests clarified that the Pickering emulsions showed an elastic and gel texture, and their gel strength could be enhanced by regulating the oil-water ratios from 3:7 to 7:3. In addition, after one month of storage, the EI of all emulsions remained above 92 % with no obvious phase separation or demulsification. These results suggested that the PPI/CL-CNCs-stabilized Pickering emulsions showed good physical stabilities. The study on the rheological properties and physical stabilities of PPI/CL-CNCs-based Pickering emulsions provided novel insights on developing highly stable Pickering emulsions.

Functional Properties of Corn Byproduct-Based Emulsifier Prepared by Hydrothermal-Alkaline

As consumers' interest in nature-sourced additives has increased, zein has been treated hydrothermally under alkaline conditions to prepare a nature-sourced emulsifier. The effects of mild hydrothermal-alkaline treatment with different temperatures or alkaline concentrations on the emulsifying properties of zein were investigated. The emulsification activity and stability index of zein hydrolysates increased by 39% and 164%, respectively. The optimal simple stabilized emulsion was uniform and stable against heat treatment up to 90 °C, sodium chloride up to 200 mmol/L, and pH values ranging from 6 to 9. Moreover, it presented excellent storage stability compared to commonly used food emulsifiers. The surface hydrophobicity caused the depolymerization of the tertiary structure of zein and the dissociation of subunits along with exposure of hydrophilic groups. The amino acid composition and circular dichroism results reveal that the treatment dissociated protein subunits and transformed α-helices into anti-parallel β-sheets and random coil. In conclusion, mild hydrothermal-alkaline treatment may well contribute to the extended functional properties of zein as a nature-sourced emulsifier.

Fabrication of Antioxidant Pickering Emulsion Based on Resveratrol-Grafted Zein Conjugates: Enhancing the Physical and Oxidative Stability

Lipid oxidation is still a major problem complicating the development of food emulsions. In this study, an antioxidant Pickering emulsion stabilized by resveratrol-grafted zein (Z-R) conjugates and pectin (P) complex particles was prepared. The hydrophilic pectin successfully adjusted the wettability of Z-R; when the mass ratio of Z-R to P was 2:1 (Z-R/P2:1), the three-phase contact angle was 90.68°, and the wettability of the particles was close to neutral. Rheological analysis showed that the emulsion formed an elastic gel structure. FTIR spectra indicated that there was a hydrogen bond and electrostatic interaction between Z-R and P. The disappearance of characteristic infrared peaks of corn oil was due to a dense protective film formed on the surface of oil drops by Z-R/P2:1 particles, which was confirmed by confocal laser scanning microscopy. The emulsion stabilized by Z-R/P2:1 had excellent physical stability at a wide range of pH values (4-9), salt ion concentrations (0.04-0.15 mol·L-1) and storage times (0-30 days). The anti-lipid oxidation ability of the emulsion was outstanding; after storage for 14 days at room temperature, the MDA content in the emulsion was only 123.85 μmol/kg oil. In conclusion, the Z-R/P2:1 particles prepared in this study can effectively stabilize a Pickering emulsion and expand the usability of the method for constructing antioxidant Pickering emulsions.

Sustainability and Gender Perspective in Food Innovation: Foods and Food Processing Coproducts as Source of Macro- and Micro-Nutrients for Woman-Fortified Foods

Micro- and macro-nutrient deficiencies among women are considered a global issue that the food industry has not adequately considered until recently. The industry must provide and guarantee a diversity of food products worldwide that allow women to get a correct and balanced diet according their life stage. The food industry must focus on this challenge within a framework of sustainable production, minimizing the use of natural resources and avoiding the emission of waste and pollutants throughout the life cycle of food. Food coproducts are presented as potential bioactive functional compounds which can be useful for technological purposes, due to the fact that they can serve as non-chemical, natural and health-improving food ingredients. In this review, we focus on the potential use of food processing coproducts which must be part of a strategy to promote and improve women's health and well-being. This knowledge will make it possible to select potential ingredients from coproducts to be used in the fortification of foods intended for consumption by females and to introduce sustainability and gender perspectives into food innovation. The attainment of fortifications for foods for women has to be linked to the use of sustainable sources from food coproducts in order to be economically viable and competitive.

Oxidized Chitin Nanocrystals Greatly Strengthen the Stability of Resveratrol-Loaded Gliadin Nanoparticles

Resveratrol (RES) is a natural polyphenol with a variety of health beneficial properties, but its application is greatly limited due to low aqueous solubility and poor bioavailability. This study aims to address these issues via gliadin nanoparticles stabilized with oxidized chitin nanocrystals (O-ChNCs) as a delivery system for RES. RES-loaded gliadin nanoparticles (GRNPs) were fabricated by an antisolvent method, and their formation mechanism was elucidated using zeta-potential, FTIR, XRD, and TEM. Furthermore, the effect of O-ChNCs on the colloidal stability and bioactiveness of GRNPs was discussed. The results demonstrate that O-ChNCs are adsorbed onto the surface of GRNPs through hydrogen bonding and electrostatic interactions, leading to the enhanced absolute potential and the improved hydrophobicity of the particles, which in turn facilitates the stability of the GRNPs. Furthermore, the changes in the release profile and antioxidant activity of RES in the simulated gastric and intestinal tracts indicate that the adsorption of O-ChNCs not only delays the release of RES but also has a protective effect on the antioxidant capacity of RES. This study provides significant implications for developing stable gliadin nanoparticles as delivery vehicles for bioactive substances.