Influence of enzymatic and chemical interesterification on crystallisation properties of refined, bleached and deodourised (RBD) palm oil and RBD palm kernel oil blends

Batch and continuous enzymatic interesterification of beef tallow: Interesterification degree, reaction relationship, and physicochemical properties

The relationship between batch and continuous enzymatic interesterification was studied through enzymatic interesterification of beef tallow. The interesterification degree (ID) during the batch reaction was monitored based on triacylglycerol composition, sn-2 fatty acid composition, solid fat content, and melting profile and was described by an exponential model. A relationship equation featuring reaction parameters of the two reations was established to predict the ID and physicochemical characteristics in continuous interesterification. The prediction of the ID based on triacylglycerol composition was reliable, with an R2 value greater than 0.85. Interesterification produced more high-melting-point components for both reactions, but the acyl migration in the batch-stirring reactor was much greater, resulting in faster crystallization, a more delicate crystal network, and lower hardness. The relationship equation can be employed to predict the ID, but the prediction of physicochemical properties was constrained by the difference in acyl migration degree between the two reactions.

Medium- and Long-Chain Triacylglycerol: Preparation, Health Benefits, and Food Utilization

Medium- and long-chain triacylglycerol (MLCT) is a structured lipid with both medium- and long-chain fatty acids in one triacylglycerol molecule. Compared with long-chain triacylglycerol (LCT), which is mainly present in common edible oils, and the physical blend of medium-chain triacylglycerol with LCT (MCT/LCT), MLCT has different physicochemical properties, metabolic characteristics, and nutritional values. In this article, the recent advances in the use of MLCT in food formulations are reviewed. The natural sources and preparation of MLCT are discussed. A comprehensive summary of MLCT digestion, absorption, transport, and oxidation is provided as well as its health benefits, including reducing the risk of overweight, hypolipidemic and hypoglycemic effects, etc. The potential MLCT uses in food formulations, such as infant formulas, healthy foods for weight loss, and sports foods, are summarized. Finally, the current safety assessment and regulatory status of MLCT in food formulations are reviewed.

Interesterified palm oil promotes insulin resistance and altered insulin secretion and signaling in Swiss mice

Interesterified fats have been used to replace trans-fat in ultra-processed foods. However, their metabolic effects are not completely understood. Hence, this study aimed to investigate the effects related to glucose homeostasis in response to interesterified palm oil or refined palm oil intake. Four-week-old male Swiss mice were randomly divided into four experimental groups and fed the following diets for 8 weeks: a normocaloric and normolipidic diet containing refined palm oil (PO group) or interesterified palm oil (IPO group); a hypercaloric and high-fat diet containing refined PO (POHF group) or interesterified PO (IPOHF group). Metabolic parameters related to body mass, adiposity and food consumption showed no significant differences. As for glucose homeostasis parameters, interesterified palm oil diets (IPO and IPOHF) resulted in higher glucose intolerance than unmodified palm oil diets (PO and POHF). Euglycemic-hyperinsulinemic clamp assessment showed a higher endogenous glucose production in the IPO group compared with the PO group. Moreover, the IPO group showed significantly lower p-AKT protein content (in the muscle and liver tissues) when compared with the PO group. Analysis of glucose-stimulated static insulin secretion (11.1 mmol/L glucose) in isolated pancreatic islets showed a higher insulin secretion in animals fed interesterified fat diets (IPO and IPOHF) than in those fed with palm oil (PO and POHF). Interesterified palm oil, including in normolipidic diets, can impair insulin signaling in peripheral tissues and increase insulin secretion by β-cells, characterizing insulin resistance in mice.

Thermophysical properties of blends composed of Amazonian fats and soybean oil

Thermophysical properties of blends composed of soybean oil and fats obtained from fruits and seeds from Brazilian Amazonian region (Murumuru, Tucuma, and Bacuri) were investigated, looking for more sustainable alternatives to the mostly used industrial fats, for applications in product formulation. Fatty acid (FA) and triacylglycerol composition, nutritional indexes, solid fat content (SFC), compatibility, consistency, melting, and crystallization profiles were determined. Soybean oil increased blends' unsaturated FA profile, leading to lower SFC, but higher nutritional quality. Fats' melting profiles were significantly altered with soybean oil addition: temperatures decreased with the increase in oil content. Iso-solids diagrams showed that lipids were compatible, which is a technological advantage. SFC and consistency profiles suggested that tucuma and murumuru fats could be used as hardstocks for lipid products, and bacuri fat could be applied in products such as margarine and spreads. Blends could improve fats' spreadability and other technological properties, which is promising for applications in products formulation.

Effect of substrate composition on physicochemical properties of the medium-long-medium structured triacylglycerol

BACKGROUND

Nutritional and functional qualities and applications of structured lipids (SL) depend on the composition and molecular structure of fatty acids in the glycerol backbone of triacylglycerol (TAG). However, the relationship between the substrate composition and physicochemical qualities of SL has not been revealed. The investigation aims to disclose the effect of substrate composition on the physicochemical properties of medium-long-medium structured lipids (MLM-SLs) by enzymatic interesterification of Lipozyme TLIM/RMIM.

RESULTS

The medium-long-chain triacylglycerol (MLCT) yield could reach 70.32%, including 28.98% CaLCa (1,3-dioctonyl-2-linoleoyl glyceride) and 24.34% CaOCa (1,3-didecanoyl-2-oleoyl glyceride). The sn-2 unsaturated fatty acid composition mainly depended on long-chain triacylglycerol (LCT) in the substrate. The increased carbon chain length and double bond in triacylglycerol decreased its melting and crystallization temperature. The balanced substrate composition of MCT/LCT increased the size and finer crystals. Molecular docking simulation revealed that the MLCT molecule mainly interacted with the catalytic triplets of Lipozyme TLIM (Arg81-Ser83-Arg84) and the Lipozyme RMIM (Tyr183-Thr226-Arg262) by OH bond. The oxygen atom of the ester on the MLCT molecule was primarily bound to the hydrogen of hydroxyl and amino groups on the binding sites of Lipozyme TLIM/RMIM. The intermolecular interplay between MLCT and Lipozyme RMIM is more stable than Lipozyme TLIM due to the formation of lower binding affinity energy.

CONCLUSION

This research clarifies the interaction mechanism between MLCT molecules and lipases, and provides an in-depth understanding of the relationship between substrate composition, molecular structure and physicochemical property of MLM-SLs. © 2023 Society of Chemical Industry.

Beef tallow/lard blends in O/W emulsions: Characterization of fat crystals, partial coalescence, rheology, and aeration performance

This study aimed to find new strategies for enhancing the stability and texture properties of aerated emulsion by combining different animal fats with different ratios. Beef tallow (BT)/ lard (LA) were mixed at different ratios to prepare oil-in-water (O/W) emulsions, with and without aeration. The compatibility, crystallization behavior, stability, and rheology in both O/W and aerated emulsion systems prepared with BT/LA binary blends were further investigated. Larger and inhomogeneous β' and β crystal mixtures appeared as the BT ratio increased. Monotectic or eutectic interaction was displayed according to different BT/LA ratios, solid fat content (SFC) and temperatures. O/W emulsion prepared with BT/LA binary showed higher apparent viscosity with larger fat globules distributed as the BT ratio increased. BT had higher SFC at any given temperature and the fat globule aggregation extent was higher. Partial coalescence occurred as the LA ratio increased when SFC < 35 %. Higher foam firmness of the aerated emulsion was achieved by BT/LA binary with higher BT ratios. As a result, combining BT and LA with different ratios achieved higher emulsion stability and foam properties. This study provides a novel insight into the application of different animal fats and the improvement of high-quality whippable products.

Trends in Fat Modifications Enabling Alternative Partially Hydrogenated Fat Products Proposed for Advanced Application

The natural properties of oils and fats do not always allow for their direct use in industry (e.g., for food, cosmetics, and pharmaceuticals). Furthermore, such raw materials are often too expensive. Nowadays, the requirements for the quality and safety of fat products are increasing. For this reason, oils and fats are subjected to various modifications that make it possible to obtain a product with the desired characteristics and good quality that meets the needs of product buyers and technologists. The modification techniques of oils and fats change their physical (e.g., raise the melting point) and chemical properties (e.g., fatty acid composition). Conventional fat modification methods (hydrogenation, fractionation, and chemical interesterification) do not always meet the expectations of consumers, nutritionists, and technologists. In particular, Hydrogenation, while it allows us to obtain delicious products from the point of view of technology, is criticised for nutritional reasons. During the partial hydrogenation process, trans-isomers (TFA), dangerous for health, are formed. One of the modifications that meets current environmental requirements and trends in product safety and sustainable production is the enzymatic interesterification of fats. The unquestionable advantages of this process are the wide spectrum of possibilities for designing the product and its functional properties. After the interesterification process, the biologically active fatty acids in the fatty raw materials remain intact. However, this method is associated with high production costs. Oleogelation is a novel method of structuring liquid oils with small oil-gelling substances (even 1%). Based on the type of oleogelator, the methods of preparation can differ. Most oleogels of low molecular weight (waxes, monoglycerides, and sterols) and ethyl cellulose are prepared by dispersion in heated oil, while oleogels of high molecular weight require dehydration of the emulsion system or solvent exchange. This technique does not change the chemical composition of the oils, which allows them to keep their nutritional value. The properties of oleogels can be designed according to technological needs. Therefore, oleogelation is a future-proof solution that can reduce the consumption of TFA and saturated fatty acids while enriching the diet with unsaturated fatty acids. Oleogels can be named "fats of the future" as a new and healthy alternative for partially hydrogenated fats in foods.

Physicochemical Properties and Cookie-Making Performance as Fat Replacer of Wax-Based Rice Bran Oil Oleogels

Reducing the intake of trans and saturated fatty acids is a trend in healthy eating. In this study, the oleogels were prepared from rice bran oil (RBO), candle wax (CDW), beeswax (BW), rice bran wax (RBW), and carnauba wax (CRW), respectively, and the results based on their physicochemical properties and crystal structures at critical concentrations, 6 wt.%, 8 wt.%, and 10 wt.%, were determined to further investigate the oleogels as a shortening substitute in cookie recipes. Oleogel has a smooth, spreadable β' crystal shape which creates excellent sensory properties and improves the texture, but also has some economic benefits. A comparison between the oleogels formed at critical concentrations and those with improved mass fractions was performed in several analyses such as PLM and texture, and the oleogels with higher mass fractions had a greater hardness and stickiness and denser crystal structures. This study was used to optimize the cookie recipe by partially replacing shortening with oleogel and preparing the cookies according to the 0:1, 3:7, 1:1, 7:3, 1:0 oleogel shortening mixture, respectively. Based on the results of the textural analysis, a colorimetric and sensory evaluation of the optimized formulation of oleogels in cookies, it was evident that BW and RBW oleogels have more potential to replace shortening in cookies than CDW and CRW oleogels. In particular, oleogels with a concentration of 6 wt.% RBW (RBW-6) and at a 7:3 (oleogel:shortening) shortening replacement exhibited a hardness and crispness of 15.75 N and 97.73 g, respectively, with an L* value of 66.66 and a sensory score of 22.32 ± 0.09. The value for the color perception difference (dE) between the cookies and the control group was -3.73, which allowed us to obtain a good product with a quality and characteristics similar to shortening. This supports the feasibility of new solid fats to replace traditional plastic fats in baked goods.

Balancing functional and health benefits of food products formulated with palm oil as oil sources

Palm oil (PO) is widely utilised in the food industry and consumed in large quantities by humans. Owing to its bioactive components, such as fatty acids, carotenoids, vitamin E, and phenolic compounds, PO has been utilised for generations. However, public concern about their adverse effects on human health is growing. A literature search was conducted to identify fractionated palm oil processing techniques, proof of their health advantages, and potential food applications. Refined palm oil (RPO) is made from crude palm oil (CPO) and can be fractionated into palm olein (POl) and palm stearin (PS). Fractional crystallisation, dry fractionation, and solvent fractionation are the three basic fractionation procedures used in the PO industry. The composition of triacylglycerols and fatty acids in refined and fractionated palm oil and other vegetable oils is compared to elucidate the triacylglycerols and fatty acids that may be important in product development. It is well proven that RPO, POl, and PS extends the oil's shelf life in the food business. These oils have a more significant saturated fat content and antioxidant compounds than some vegetable oils, such as olive and coconut oils, making them more stable. Palm olein and stearin are also superior shortening agents and frying mediums for baking goods and meals. Furthermore, when ingested modestly daily, palm oils, especially RPO and POl, provide health benefits such as cardioprotective, antidiabetic, anti-inflammatory, and antithrombotic effects. Opportunities exist for fractionated palm oil to become a fat substitute; however, nutrition aspects need to be considered in further developing the market.

Synthesis of cocoa butter alternatives from palm kernel stearin, coconut oil and fully hydrogenated palm stearin blends by chemical interesterification

BACKGROUND

Chemical interesterification (CIE) is one of the important technological processes for the production of zero-trans fats. The aim of this study was to produce trans-free cocoa butter alternatives (CBAs) from palm kernel stearin (PKS), coconut oil (CNO) and fully-hydrogenated palm stearin (FHPS) blends via CIE using sodium methoxide as a catalyst. The physicochemical properties, crystallization and melting behavior, solid fat content (SFC), crystal morphology and polymorphism of the structured lipids (SLs) obtained and the corresponding physical blends (PBs) were characterized and compared with commercial CBAs.

RESULTS

After CIE, randomization of fatty acid distribution within and among triacylglycerol (TAG) molecules of PKS, CNO and FHPS resulted in a modification in TAG compositions of the PKS/CNO/FHPS blends and improved the properties and crystallization behavior of the blends. SFC and slip melting points of all SLs decreased from those of their respective PBs. In particular, SLs obtained from CIE of blends with 60-70% wt. PKS (blend ratios 60:10:30 and 70:10:20) exhibited the melting characteristic, SFC curves, crystal morphology and polymorphic form most similar to the commercial CBAs. In addition, these blends melted almost completely at body temperature, an improvement from that of the commercial CBAs.

CONCLUSION

SLs obtained from CIE of blends with 60-70% wt. PKS has high potential to be used commercially as trans-free CBAs for the confectionery industry. © 2021 Society of Chemical Industry.

Fatty acid profile, minor bioactive constituents and physicochemical properties of insect-based oils: A comprehensive review

Insect-based food or ingredients have received tremendous attention worldwide because of their potential to ensure food and nutrition security, mitigating the reliance on land-dependent agricultural products. Indeed, insect-farming has low environmental impacts with reduced land, water and energy input. More importantly, insects are rich in high quality proteins and fats. They are also excellent sources of minerals, vitamins and bioactive compounds. Insect-based lipids are intriguing because they may contain high levels of unsaturated fatty acids particularly linoleic and α-linolenic acids. Besides, the insect-based lipids also show a considerable amount of bioactive components such as tocols, sterols and carotenoids. However, their fatty acid compositions and the nutritional values may vary depending on species, feed composition, developmental stage, geographical locations, and extraction techniques. Therefore, the present article aims to provide a comprehensive review on the fatty acid composition, the minor bioactive constituents and the physicochemical properties of fats and oils derived from insects of different orders (Coleoptera, Lepidoptera, Hymenoptera, Orthoptera, Hemiptera and Diptera). The various parameters affecting the nutritional compositions of the insect-based lipids will also be highlighted. These information will definitely provide a detailed insight on the potential applications of these fats in various food systems based on their unique properties.

Margarines: Historical approach, technological aspects, nutritional profile, and global trends

Margarines are an expanding market worldwide due to large-scale commercial, lower cost, growth of bakery and confectionery markets, and seasonal independence. The fatty acid composition, solid fat content, consistency, and melting point of the fats used in margarine determine their functional properties. Due to its proven association with increased risk of cardiovascular diseases, the recommendations of the World Health Organization and the enactment of laws in several countries to eliminate industrially produced trans fatty acids (TFA) have resulted in the prohibition or progressive reduction in the use of partially hydrogenated fat. However, issues related to high levels of TFA and saturated fatty acids still constitute a challenge in the formulation of this product category. Current trends on margarine production addition of phytosterols, non-lipid components, organogels, and new interesterified fat bases are reviewed. This review aims to present a historical view and the technological evolution of margarines, including their production processes, formulations, and physical and nutritional characteristics, as well as legislation, and main trends.

Enzymatic interesterification effect on the physicochemical and technological properties of cupuassu seed fat and inaja pulp oil blends

The objective of this work was to evaluate the effect of enzymatic interesterification process in blends with different proportions (w:w) of cupuassu fat and inaja oil (80:20, 70:30, 60:40, 50:50 and 40:60). The interesterification reaction was carried out at 65 °C, agitation at 150 rpm, and enzyme concentration of 5% (w/w), for 6 h. Acidity index, melting point, consistency and solid fat content of the blends were characterized before and after the interesterification process. Fatty acid content was characterized in cupuassu fat and inaja oil and, nutritional quality indexes of atherogenicity (AI) and thrombogenicity (TI) were calculated. Enzymatic interesterification promoted a decrease in acidity (<0.6%) and changes in the blends' properties, making them suitable for food product preparation. All esterified blends (cupuassu seed fat:inaja pulp oil) presented suitable consistency properties, plasticity and spreadability to be used for the preparation of functional, table and soft table types of margarine and used in food preparation such as special fats.

Modification of palm-based oil blend via interesterification: Physicochemical properties, crystallization behaviors and oxidative stabilities

Interesterification is widely employed as an effective technique to modify oils and fats. This study utilizes palm-based oil (palm olein: palm kernel oil: palm stearin, 5:3:2, w/w/w) as the raw material for the interesterification process performed in a pilot-scale packed bed reactor. Enzymatic interesterification (EIE) was catalyzed by Lipozyme TL IM (813.0 g) at 60℃ with reaction flow rate of 100 mL/min. Chemical interesterification (CIE) was catalyzed using sodium methoxide (0.3 wt%) as catalyst at 105 °C for 30 min. The results showed that the EIE fats had lower solid fat content tendency compared to that of CIE fats. The crystallization onset temperature was higher in EIE fats (23.09℃) compared to that of CIE (19.08℃). The results were consistent with the crystallization kinetics whereby the Avrami K constants of EIE fats were higher than that of CIE fats at various temperatures, indicating rapid crystallization and instant nucleation. Linear growth mechanism was dominant and the crystals formed were smaller in size as observed using polarized light microscope. The interesterified fats exhibited the presence of β and β'-crystals. While most of the tocopherol content was retained after EIE (386.18 ug/g), the molecular distillation process reduced the tocopherol concentration (110.01 ug/g) which consequently affected the oxidative stability. The findings in this work contribute to the fundamental understanding on the differences between CIE and EIE fats and provides data to support the preparation of modified fats via EIE that shows great potential as a controllable technique for industrialization.

Evaluation of enzymatic interesterification in structured triacylglycerols preparation: a concise review and prospect

Enzymatic interesterification (EIE) is one of the emerging technologies in the specialty fats industry. EIE has several advantages over the conventional chemical interesterification method, such that the process has higher flexibility and efficiency, is environmentally friendly and the immobilized enzyme can be recycled besides of the lower requirement for substrate's acid value. The physical properties and nutritional qualities of the fats and oils are modified after EIE, depending on the change in the position of fatty acids on the triacylglycerol (TAG) molecules. Evaluation of the interesterification reaction are important and useful in terms of its technological applications. This paper summarizes the conventional methods and the advancement for evaluating EIE processes, e.g., determination of the change in slip melting points, solid fat contents, TAG with equivalent carbon numbers, and sn-2 fatty acid compositions of the end product. Nonetheless, these methods are not comprehensive because during the EIE process, acyl migration occurs. A novel and convenient evaluation model which is based on the fatty acid distribution on the glycerol-backbone is proposed as a perspective. This model can be employed to monitor the interesterification degree and acyl migration during a regiospecific EIE process, which serves as a reaction rule that can be employed to control and optimize the EIE process, thereby producing structured TAG with desired properties.