The regulation of sodium alginate on the stability of ovalbumin-pectin complexes for VD3 encapsulation and in vitro simulated gastrointestinal digestion study

Construction of a pectin/sodium alginate composite hydrogel delivery system for improving the bioaccessibility of phycocyanin

In this study, different concentrations of sodium alginate were compounded with pectin and phycocyanin to co-prepare composite hydrogel spheres (HP-PC-SA 0.2 %, 0.6 %, 1.0 %, 1.4 %) to evaluate the potential of the composite hydrogel spheres for the application as phycocyanin delivery carriers. The hydrogel spheres' physicochemical properties and bioaccessibility were assessed through scanning electron microscopy, textural analysis, drug-carrying properties evaluation, and in vitro and in vivo controlled release analysis in the gastrointestinal environment. Results indicated that higher sodium alginate concentrations led to smaller pore sizes and denser networks on the surface of hydrogel spheres. The textural properties of hydrogel spheres improved, and their water-holding capacity increased from 93.01 % to 97.97 %. The HP-PC-SA (1.0 %) formulation achieved the highest encapsulation rate and drug loading capacity, at 96.87 % and 6.22 %, respectively. Within the gastrointestinal tract, the composite hydrogel's structure significantly enhanced and protected the phycocyanin's digestibility, achieving a bioaccessibility of up to 88.03 %. In conclusion, our findings offer new insights into improving functionality and the effective use of phycocyanin via pectin-based hydrogel spheres.

Preparation, characterization and application of pH-responsive smart film based on chitosan/zein and red radish anthocyanin

This research was aimed at developing a novel pH-responsive smart film made of chitosan, zein and red radish anthocyanin (RRA). The morphology, interaction, crystallization, thermal stability, physiochemical properties and pH sensitivity of films were analyzed. The smart film was applied to monitor the freshness of mushroom (Agaricus bisporus). The results of morphology (SEM) and spectrum (FT-IR and XRD) indicated that the incorporation of RRA could enhance the interaction between polymer matrix. The addition of RRA had no significant effect on the thermal stability of films. The chitosan/zein/red radish anthocyanin (C/Z/R) films exhibited higher tensile strength, Young's modulus, hydrophobicity, antioxidant activity and lower elongation at break. The C/Z/R films had stronger water vapor and gas barrier capacity. The C/Z/R films showed a pH-sensitive color variation from red (pH 2) to green (pH 12) and good reversibility under alkaline and acidic environment. The prepared smart film could be successfully used for the quality monitoring of mushroom.

Alginate biopolymeric structures: Versatile carriers for bioactive compounds in functional foods and nutraceutical formulations: A review

Alginate-based biopolymer products have gained attention for protecting and delivering bioactive components in nutraceuticals and functional foods. These naturally abundant anionic, unbranched, and linear copolymers are also produced commercially by microorganisms. Alone or in combination with other copolymers, they efficiently transport bioactive molecules in food and nutraceutical products. This review aims to provide an in-depth understanding of alginate-based products and structures, emphasizing their role in delivering functional molecules in various formulations and delivery systems. These include edible coatings/films, gels/emulsions, beads/droplets, microspheres/particles, and engineered nanostructures where alginates have been used potentially. By exploring these applications, readers gain insights into the benefits of these products. Because, alginate-based biopolymer products have shown promise in delivering bioactive compounds like vitamin C, vitamin D3, curcumin, β-carotene, resveratrol, folic acid, gliadins, caffeic acid, betanin, limonoids, quercetin, several polyphenols and essential oils, etc., which are chief contributors to treating specific/overall nutritional and chronic metabolic disorders. So, this review summarizes the potential of alginate-based structures/products in various forms for delivering a wide range of functional food ingredients and nutraceutical components that offer promising perspectives for future investigations.

Preparation and evaluation of ovalbumin-fucoidan nanoparticles for nicotinamide mononucleotide encapsulation with enhanced stability and anti-aging activity

Nicotinamide mononucleotide (NMN) has been recognized as a promising bio-active compound in relieving aging-related mitochondrial dysfunction. Self-assembled nanoparticles were prepared based on interaction between ovalbumin (OVA) and fucoidan to improve the stability and bio-accessibility of NMN. The OVA-fucoidan nanoparticles (OFNPs) displayed outstanding thermal stability and entrapment ability of NMN. The reactive oxygen species (ROS) analysis and senescence-associated β-galactosidase (SA-β-gal) staining characterization indicated that NMN encapsulated by OFNPs could effectively alleviate the cellular senescence of d-galactose-induced senescent cells. In vivo Caenorhabitis elegans experiment demonstrated that NMN-loaded OFNPs caused less accumulation of lipofuscin and protected NMN from thermal damage. Compared with free NMN, the NMN-loaded OFNPs prolonged lifespan from 28 to 31 days, increased 26% reproductive ability, and improved 12% body length of Caenorhabitis elegans. The results indicated that the use of nanocarriers could be a good strategy to improve anti-oxidative stress and anti-aging ability of NMN.

Protein-polysaccharide nanoconjugates: Potential tools for delivery of plant-derived nutraceuticals

Protein-polysaccharide nanoconjugates are covalently interactive networks that are currently the subject of intense research owing to their emerging applications in the food nanotechnology field. Due to their biocompatibility and biodegradability properties, they have played a significant role as wall materials for the formation of various nanostructures to encapsulate nutraceuticals. The food-grade protein-polysaccharide nanoconjugates would be employed to enhance the delivery and stability of nutraceuticals for their real use in the food industry. The most common edible polysaccharides (cellulose, chitosan, pectin, starch, carrageenan, fucoidan, mannan, glucomannan, and arabic gum) and proteins (silk fibroin, collagen, gelatin, soy protein, corn zein, and wheat gluten) have been used as potential building blocks in nano-encapsulation systems because of their excellent physicochemical properties. This article broadens the discussion of food-grade proteins and polysaccharides as nano-encapsulation biomaterials and their fabrication methods, along with a review of the applications of protein-polysaccharide nanoconjugates in the delivery of plant-derived nutraceuticals.

Allergenicity, assembly and applications of ovalbumin in egg white: a review

Ovalbumin (OVA), the most abundant protein in egg whites, has been widely used in various industries. Currently, the structure of OVA has been clearly established, and the extraction of high-purified OVA has become feasible. However, the allergenicity of OVA is still a serious problem because it can cause severe allergic reactions and may even be life-threatening. The structure and allergenicity of the OVA can be altered by many processing methods. In this article, a detailed description on the structure and a comprehensive overview on the extraction protocols and the allergenicity of OVA was documented. Additionally, the information on assembly and potential applications of OVA was summarized and discussed in detail. Physical treatment, chemical modification, and microbial processing can be applied to alter the IgE-binding capacity of OVA by changing its structure and linear/sequential epitopes. Furthermore, research indicated that OVA could assemble with itself or other biomolecules into various forms (particles, fibers, gels, and nanosheets), which expanded its application in the food field. OVA also shows excellent application prospects, including food preservation, functional food ingredients and nutrient delivery. Therefore, OVA demonstrates significant investigation value as a food grade ingredient.

Highly biologically active and pH-sensitive collagen hydrolysate-chitosan film loaded with red cabbage extracts realizing dynamic visualization and preservation of shrimp freshness

Accurate and efficient detection of food freshness is of great significance to guarantee food safety. Herein, pH sensitive colorimetric films with considerable biological activities have been prepared by combining red cabbage anthocyanin extracts (RCE) with collagen hydrolysate-chitosan (CH-CS) matrix film. The formation mechanism of CH-CS-RCE films was discussed by SEM, FT-IR and XRD, which showed that RCE was successfully fixed in CH-CS film through hydrogen bonding and electrostatic interaction. The CH-CS-RCE films exhibited good mechanical properties, high barrier ability, excellent thermal stability, significant antioxidant and antimicrobial activity, and especially sensitive response to pH and ammonia. Fickian diffusion was the main mechanism for the release of RCE from CH-CS-RCE films and such release mechanism facilitated the maintenance of functional features of films. During the storage of shrimps at 4 °C, CH-CS-RCE2% showed a remarkable preservation effect on shrimps, and their shelf life was prolonged from 2 d to 5 d. Furthermore, CH-CS-RCE2% provided a dynamic visual color switching to detect the freshness of shrimp, realizing real-time monitoring of freshness. Color information (RGB) extracted via smartphone APP was used to enhance the accuracy and universality of freshness indication. Thus, this multifunctional film has great potential in food preservation and freshness monitoring.

Research advance of non-thermal processing technologies on ovalbumin properties: The gelation, foaming, emulsification, allergenicity, immunoregulation and its delivery system application

Ovalbumin (OVA) is the most abundant protein in egg white, with excellent functional properties (e.g., gelling, foaming, emulsifying properties). Nevertheless, OVA has strong allergenicity, which is usually mediated by specific IgE thus results in gut microbiota dysbiosis and causes atopic dermatitis, asthma, and other inflammation actions. Processing technologies and the interactions with other active ingredients can influence the functional properties and allergic epitopes of OVA. This review focuses on the non-thermal processing technologies effects on the functional properties and allergenicity of OVA. Moreover, the research advance about immunomodulatory mechanisms of OVA-mediated food allergy and the role of gut microbiota in OVA allergy was summarized. Finally, the interactions between OVA and active ingredients (such as polyphenols and polysaccharides) and OVA-based delivery systems construction are summarized. Compared with traditional thermal processing technologies, novel non-thermal processing techniques have less damage to OVA nutritional value, which also improve OVA properties. OVA can interact with various active ingredients by covalent and non-covalent interactions during processing, which can alter the structure or allergic epitopes to affect OVA/active components properties. The interactions can promote OVA-based delivery systems construction, such as emulsions, hydrogels, microencapsulation, nanoparticles to encapsulate bioactive components and monitor freshness for improving foods quality and safety.

Preparation of Gum Arabic-Maltose-Pea Protein Isolate Complexes for 1-Octacosanol Microcapsule: Improved Storage Stability, Sustained Release in the Gastrointestinal Tract, and Its Effect on the Lipid Metabolism of High-Fat-Diet-Induced Obesity Mice

1-Octacosanol (Octa) is a natural compound with several beneficial properties. However, its poor water solubility and metabolism in the digestive tract reduce its efficacy. The Octa-GA-Malt-PPI microcapsule was prepared as follows: gum Arabic (GA):maltose (Malt):pea protein isolate (PPI) = 2:1:2; core:shell = 1:7.5; emulsification temperature 70 °C; pH 9.0. An in vitro simulated gastrointestinal tract was used to analyze the digestion behavior. C57BL/6 mice were selected to establish an obesity model induced by a high-fat diet (HFD) to evaluate the effect of Octa monomer and the microcapsule. The diffusivity in water and storage stability of Octa improved after encapsulation. The microcapsule was ascribed to electrostatic interactions, hydrogen bonding, and hydrophobic interactions. The sustained release of Octa from the microcapsule was observed in a simulated gastrointestinal tract. Compared with Octa monomer, the microcapsule was more effective in alleviating the symptoms of weight gain, hypertension, and hyperlipidemia induced by HFD in mice. In conclusion, the construction of microcapsule structure can improve the dispersibility and stability of Octa in water, achieve sustained release of Octa in the gastrointestinal tract, and improve its efficiency in alleviating the effects of HFD on the body.

Effect of Ultrasonic Irradiation on the Physicochemical and Structural Properties of Laminaria japonica Polysaccharides and Their Performance in Biological Activities

Due to the large molecular weight and complex structure of Laminaria japonica polysaccharides (LJP), which limit their absorption and utilization by the body, methods to effectively degrade polysaccharides had received more and more attention. In the present research, hot water extraction coupled with three-phase partitioning (TPP) was developed to extract and isolate LJP. Ultrasonic L. japonica polysaccharides (ULJP) were obtained by ultrasonic degradation. In addition, their physicochemical characteristics and in vitro biological activities were investigated. Results indicated that ULJP had lower weight-average molecular weight (153 kDa) and looser surface morphology than the LJP. The primary structures of LJP and ULJP were basically unchanged, both contained α-hexo-pyranoses and were mainly connected by 1,4-glycosidic bonds. Compared with LJP, ULJP had stronger antioxidant activity, α-amylase inhibitory effect and anti-inflammatory effect on RAW264.7 macrophages. The scavenging rate of DPPH free radicals by ULJP is 35.85%. Therefore, ultrasonic degradation could effectively degrade LJP and significantly improve the biological activity of LJP, which provided a theoretical basis for the in-depth utilization and research and development of L. japonica in the fields of medicine and food.

Impact of Guar Gum and Locust Bean Gum Addition on the Pasting, Rheological Properties, and Freeze-Thaw Stability of Rice Starch Gel

Improving the gel texture and stability of rice starch (RS) by natural hydrocolloids is important for the development of gluten-free starch-based products. In this paper, the effects of guar gum and locust bean gum on the pasting, rheological properties, and freeze−thaw stability of rice starch were investigated by using a rapid visco analyzer, rheometer, and texture analyzer. Both gums can modify the pasting properties, revealed by an increment in the peak, trough, and final viscosities, and prevent the short-term retrogradation tendency of RS. Dynamic viscoelasticity measurements also indicated that the starch−gum system exhibits superior viscoelastic properties compared with starch alone, as revealed by its higher storage modulus (G′). Compared with the control, the hysteresis loop area of the guar gum-containing system and locust bean gum-containing system was reduced by 37.7% and 24.2%, respectively, indicating that the addition of gums could enhance shear resistance and structure recovery properties. The thermodynamic properties indicated that both gums retard short-term retrogradation as well as long-term retrogradation of the RS gels. Interestingly, the textural properties and freeze−thaw stability of the RS gel were significantly improved by the addition of galactomannans (p < 0.05), and guar gum was more effective than locust bean gum, which may be due to the different mannose to galactose ratio. The results provide alternatives for gluten-free recipes with improved texture properties and freeze−thaw stability.

Egg white protein-based delivery system for bioactive substances: a review

Some bioactive substances in food have problems such as poor solubility, unstable chemical properties and low bioavailability, which limits their application in functional food. Recently, many egg white protein-based delivery carriers have been developed to improve the chemical stability, biological activity and bioavailability of bioactive substances. This article reviewed the structure and properties of several major egg white proteins commonly used to construct bioactive substance delivery systems. Several common carrier types based on egg white proteins, including hydrogels, emulsions, micro/nanoparticles, aerogels and electrospinning were then introduced. The biological functions of common bioactive substances, the limitations, and the role of egg white protein-based delivery systems were also discussed. At present, whole egg white protein, ovalbumin and lysozyme are most widely used in delivery systems, while ovotransferrin, ovomucoid and ovomucin are less developed and applied. Egg white protein-based nanoparticles are currently the most commonly used delivery carriers. Egg white protein-based hydrogels, emulsions, and microparticles are also widely used. Future research on the application of various egg white proteins in developed new delivery systems will provide more choices for the delivery of various bioactive substances.

Encapsulation of EGCG by Zein-Gum Arabic Complex Nanoparticles and In Vitro Simulated Digestion of Complex Nanoparticles

Epigallocatechin gallate (EGCG) has many excellent qualities such as its antitumor, antiradiation and anti-oxidation properties, but its application is limited because its oral bioavailability is low and stability is poor. In this paper, zein and gum arabic (GA) were used as wall materials to prepare Zein-GA complex nanoparticles for encapsulating and protecting the EGCG. The particle size of Zein-GA-EGCG complex nanoparticles ranged from 128.03–221.23 nm, and the EGCG encapsulation efficiency reached a maximum of 75.23% when the mass ratio of zein to GA was 1:1. The FTIR and XRD results illustrated that the components of the Zein-GA-EGCG complex nanoparticles interacted by electrostatic, hydrogen bonding, and hydrophobic interactions. The EGCG release rate of Zein-GA-EGCG nanoparticles (16.42%) was lower than that of Zein-EGCG (25.52%) during gastric digestion, and a large amount of EGCG was released during intestinal digestion, suggesting that the Zein-GA-EGCG nanoparticles could achieve the sustained release of EGCG during in vitro digestion. Hence, using Zein-GA complexes to encapsulate EGCG effectively increased the encapsulation efficiency of EGCG and realized the purpose of sustained release during simulated gastrointestinal digestion.

Simulated gastrointestinal digestion of protein alginate complexes: effects of whey protein cross-linking and the composition and degradation of alginate

Alginate and whey protein are common additives in food production improving storage stability, texture and nutritional value. Alginate forms complexes with whey protein and inhibits proteolysis by pepsin and trypsin, but the influence of alginate protein complexation on digestion is poorly understood. This study shows that whey protein cross-linking by microbial transglutaminase dramatically decreased particle size (2-fold) and viscosity of alginate protein complexes. The INFOGEST in vitro simulated gastrointestinal digestion of whey protein was increased by cross-linking (16%) and suppressed by alginate, most pronounced with high mannuronic acid and least with high guluronic acid content. Sizes of alginate whey protein particles increased during gastric digestion, whereas for cross-linked whey protein complexes the size initially increased, but returned to their initial size at the end of gastric digestion. While alginate is not degraded by human enzymes, a few gut bacteria were recently found to encode lyases and other enzymes metabolizing alginate. Alginate lyase added to the intestinal phase enhanced digestion (9%) as controlled by alginate composition and enzyme specificity. Thus we provide evidence that use of hydrocolloids and processing of protein strongly influence digestion and should be considered when using food additives.

Understanding of physicochemical properties and antioxidant activity of ovalbumin-sodium alginate composite nanoparticle-encapsulated kaempferol/tannin acid

In this research, ovalbumin (OVA) and sodium alginate (SA) were used as the materials to prepare an OVA–SA composite carrier, which protected and encapsulated the hydrophobic kaempferol (KAE) and the hydrophilic tannic acid (TA) (OVA–SA, OVA–TA–SA, OVA–KAE–SA, and OVA–TA–KAE–SA). Results showed that the observation of small diffraction peaks in carriers proved the successful encapsulation of KAE/TA. The protein conformation of the composite nanoparticles changed. OVA–TA–SA composite nanoparticles had the highest α-helix content and the fewest random coils, so the protein structure of it had the strongest stability. OVA–TA–KAE–SA composite nanoparticles had the strongest system stability and thermal stability, which might be due to the synergistic effect of the two polyphenols, suggesting the encapsulation of KAE/TA increased the system stability and the thermal stability of OVA–SA composite nanoparticles. Additionally, the composite nanoparticles were endowed with antioxidant ability and antibacterial ability (against Staphylococcus aureus and Escherichia coli) in the order OVA–TA–SA > OVA–TA–KAE–SA > OVA–KAE–SA based on the difference in antibacterial diameter (D, mm) and square (S, mm²), indicating that polyphenols enhanced the antibacterial and antioxidant ability of OVA–SA composite nanoparticles, and the enhancement effect of TA was stronger than that of KAE. These results provide a theoretical basis for the application of OVA–SA composite nanoparticles in the delivery of bioactive compounds.

Ovalbumin (OVA) and sodium alginate (SA) were used as materials to prepare an OVA–SA composite carrier, which encapsulated the hydrophobic kaempferol (KAE) and the hydrophilic tannic acid (TA) (OVA–SA, OVA–TA–SA, OVA–KAE–SA, and OVA–TA–KAE–SA).

Characterization and determination of bovine immunoglobulin G subtypes in milk and dairy products by UPLC-MS

In this study, ultra-high performance liquid chromatography mass spectrometry (UPLC-MS) method was established for the characterization and quantitative determination of immunoglobulin G (IgG) subtypes (IgG1, IgG2, IgG3) in bovine dairy products. High-resolution mass spectrometry (HRMS) was applied to qualitatively confirm the theoretical peptides with specificity, enzymatic hydrolysis curve and stability among in heavy chain constant (CH1, CH2 and CH3) regions. The characteristic peptides VHNEGLPAPIVR, EPSVFIFPPKPK, GLPAPIVR, VVSALR were screened to quantitative analysis bovine IgG1, IgG2, IgG3 and the total amount of bovine IgG1 and IgG3, respectively. Isotope-labeled peptides were obtained by isotope dimethylation reaction, which aimed to correct the matrix effects. The results showed that the recovery was between 98.7% and 103.5%, and the precision of inter-day and intra-day was less than 6.8%. Moreover, this method had good linearity (R² ≥ 0.999). Therefore, this research provided an effective method for quantitatively detecting bovine IgG subtypes in milk and dairy products.

Fabrication and digestive characteristics of high internal phase Pickering emulsions stabilized by ovalbumin-pectin complexes for improving the stability and bioaccessibility of curcumin

In this study, ovalbumin (OVA) interacted with pectin (PE) to form soluble electrostatic complexes to improve the functional properties of high internal phase Pickering emulsions (HIPEs) under extreme conditions. The results showed that the stability of the OVA-PE soluble complexes-stabilized HIPEs was significantly better than that of the free OVA-stabilized HIPEs and was modulated by the biopolymer ratio. In particular, the complexes at an OVA:PE ratio of 1:1 (C-1:1) may form particulates with a core-shell structure by a flocculation mechanism. The C-1:1-stabilized HIPEs had the smallest oil droplet size (11.34 ± 1.14 μm) and the best resistance to extreme environmental stresses due to their strong, rigid structure and dense interfacial architecture. The in vitro digestion results showed that the bioaccessibility (from 18.3% ± 0.5% to 38.8% ± 4.8%) of curcumin improved with increasing PE content. Our work is helpful in understanding OVA-PE complexes as stabilizers for HIPEs and their potential applications in food delivery systems.

Bioactive compounds: Application of albumin nanocarriers as delivery systems

Enriched products with bioactive compounds (BCs) show the capacity to produce a wide range of possible health effects. Most BCs are essentially hydrophobic and sensitive to environmental factors; so, encapsulation becomes a strategy to solve these problems. Many globular proteins have the intrinsic ability to bind, protect, encapsulate, and introduce BCs into nutraceutical or pharmaceutical matrices. Among them, albumins as human serum albumin (HSA), bovine serum albumin (BSA), ovalbumin (OVA) and α-lactalbumin (ALA) are widely abundant, available, and applied in many industrial sectors, becoming promissory materials to encapsulate BCs. Therefore, this review focuses on researches about the main groups of natural origin BCs (namely phenolic compounds, lipids, vitamins, and carotenoids), the different types of nanostructures based on albumins to encapsulate them and the main fields of application for BCs-loaded albumin systems. In this context, phenolic compounds (catechins, quercetin, and chrysin) are the most extensively BCs studied and encapsulated in albumin-based nanocarriers. Other extensively studied subgroups are stilbenes and curcuminoids. Regarding lipids and vitamins; terpenes, carotenoids (β-carotene), and xanthophylls (astaxanthin) are the most considered. The main application areas of BCs are related to their antitumor, anti-inflammatory, and antioxidant properties. Finally, BSA is the most used albumin to produced BCs-loaded nanocarriers.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Preparation of zein-lecithin-EGCG complex nanoparticles stabilized peppermint oil emulsions: Physicochemical properties, stability and intelligent sensory analysis

Peppermint oil emulsions were prepared by using zein-lecithin-EGCG (Z-L/E) complex nanoparticles as emulsifiers. The preparation conditions of emulsions were optimized via measuring the particle size, surface tension and stability of emulsions, and peppermint oil of 3% (particle size = 375 nm, polydispersity index (PDI) = 0.45), the zein:lecithin ratio of 4:1 (w/w) (particle size = 396 nm), and the zein:EGCG ratio of 10:1 (w/w) (surface tension = 47.32 N/m) was the optimal condition. The rapid stability analysis showed that the instability mechanism of emulsions was ascribed to creaming and stratification, and the stability mechanism of emulsions was explored, indicating that the complex nanoparticles adsorbed on the surface of oil droplets to give Pickering emulsions. Electronic tongue experiments showed that the Z-E/L_4:1 stabilized emulsion was distinguished from the other three samples due to its good stability. The electronic nose experiment could distinguish the emulsions with different droplet sizes.

Protection and Controlled Gastrointestinal Release of Bromelain by Encapsulating in Pectin-Resistant Starch Based Hydrogel Beads

Hybrid pectin and resistant starch–based hydrogel beads loaded with bromelain using the extrusion gelation method were prepared and evaluated to enhance the activity of bromelain during gastrointestinal passage and thermal processing. The solutions of pectin–resistant starch with bromelain were dropped into the gelation bath containing calcium chloride (0.2 M) solution to develop various types of hydrogel beads. The physicochemical characteristics of the synthesized hydrogel beads were evaluated. The ratio (4.5:1.5 w/w) of pectin and resistant starch concentration significantly (p < 0.05) enhanced the encapsulation efficiency (80.53%). The presence of resistant starch resulted in increased entrapment of bromelain, improved swelling properties with sustained release behavior, and improved gastric stability than pectin hydrogels alone. The swelling of hydrogel beads was higher at pH 7.4 than pH 1.2. Optimized batch of hybrid pectin/resistant starch exhibited a spherical shape. Optical and scanning electron microscopy showed a more packed and spherical shape from the pectin/resistant starch hydrogel bead network. Fourier transformation infrared spectroscopy was also used to confirm the presence of bromelain in the hydrogel beads. The encapsulated bromelain in the pectin/hi-maize starch beads produced at a pectin/hi-maize ratio of 4.5:1.5 (percent w/w; formulation P4) obtained the highest relative bromelain activity in all heat treatments including at 95°C, whereas the highest activity of free bromelain was found only at 30°C. Bromelain encapsulated in hydrogels released at a faster rate at simulated intestinal fluid (SIF, pH 7.4) than at simulated gastrointestinal fluid (SGF, pH 1.2).

Characterization and stability of peppermint oil emulsions using polyglycerol esters of fatty acids and milk proteins as emulsifiers

Three peppermint oil emulsions using polyglycerol esters of fatty acids-casein (PGFE-CN), polyglycerol esters of fatty acids-sodium caseinate (PGFE-NaCN), and polyglycerol esters of fatty acids-whey protein isolate (PGFE-WPI) as emulsifiers were fabricated, and the droplet size, zeta potential, viscosity, and stability of emulsions were determined. The experimental results showed that the emulsion containing PGFE-CN has relatively smaller droplet size of 231.77 ± 0.49 nm. No significant changes were observed on the average particle size, polydispersity index and zeta potential during 4-week of storage, indicating that the emulsions kept stable against pH, salt ion, freeze-thaw, and storage. Fourier transform infrared spectrometer (FTIR) results showed that the electrostatic interaction occurs between CN and PGFE in the emulsion. The confocal laser scanning microscope (CLSM) was used to observe the microstructure of the emulsion, proving that droplets were evenly distributed throughout the aqueous phase by PGFE-CN emulsifier. The protein-stabilized emulsions can be used as potential carriers for the delivery of the lipophilic nutrients such as peppermint oil. PRACTICAL APPLICATION: PGFE-CN emulsifier can be directly added to the beverage systems containing oil or protein, such as coconut milk, peanut milk, and walnut milk. It can enhance the stability of beverage, prevent the precipitation, stratification, and oil floating, improve the homogeneity of the system and therefore extend the shelf life.

Advances in preparation, interaction and stimulus responsiveness of protein-based nanodelivery systems

The improved understanding of the connection between diet and health has led to growing interest in the development of functional foods designed to improve health and wellbeing. Many of the potentially health-promoting bioactive ingredients that food manufacturers would like to incorporate into these products are difficult to utilize because of their chemical instability, poor solubility, or low bioavailability. For this reason, nano-based delivery systems are being developed to overcome these problems. Food proteins possess many functional attributes that make them suitable for formulating various kinds of nanocarriers, including their surface activity, water binding, structuring, emulsification, gelation, and foaming, as well as their nutritional aspects. Proteins-based nanocarriers are therefore useful for introducing bioactive ingredients into functional foods, especially for their targeted delivery in specific applications.This review focusses on the preparation, properties, and applications of protein-based nanocarriers, such as nanoparticles, micelles, nanocages, nanoemulsions, and nanogels. In particular, we focus on the development and application of stimulus-responsive protein-based nanocarriers, which can be used to release bioactive ingredients in response to specific environmental triggers. Finally, we discuss the potential and future challenges in the design and application of these protein-based nanocarriers in the food industry.

Development, Characterization, Stability and Bioaccessibility Improvement of 7,8-Dihydroxyflavone Loaded Zein/Sophorolipid/Polysaccharide Ternary Nanoparticles: Comparison of Sodium Alginate and Sodium Carboxymethyl Cellulose

In this study, two polysaccharides [sodium alginate (ALG) and sodium carboxymethyl cellulose (CMC)] were selected to establish zein/sophorolipid/ALG (ALG/S/Z) and zein/sophorolipid/ALG (CMC/S/Z) nanoparticles to encapsulate 7,8-dihydroxyflavone (7,8-DHF), respectively. The results showed that polysaccharide types significantly affected performance of ternary nanoparticles, including CMC/S/Z possessed lower polydispersity index, particle size and turbidity, but higher zeta potential, encapsulation efficiency and loading capacity compared to ALG/S/Z. Compared to zein/sophorolipid nanoparticles (S/Z), both ALG/S/Z and CMC/S/Z had better stability against low pH (pH 3~4) and high ionic strengths (150~200 mM NaCl). Hydrophobic effects, electrostatic interactions and hydrogen bonding were confirmed in ternary nanoparticles fabrication via Fourier-transform infrared spectroscopy. Circular dichroism revealed that CMC and ALG had no evident impact on secondary structure of zein in S/Z, but changed surface morphology of S/Z as observed by scanning electron microscope. Encapsulated 7,8-DHF exhibited an amorphous state in ternary nanoparticles as detected by X-ray diffraction and differential scanning calorimetry. Furthermore, compared to S/Z, ALG/S/Z, and CMC/S/Z remarkably improved the storage stability and bioaccessibility of 7,8-DHF. CMC/S/Z possessed a greater storage stability for 7,8-DHF, however, ALG/S/Z exhibited a better in vitro bioaccessibility of 7,8-DHF. This research provides a theoretical reference for zein-based delivery system application.

Exploration of the Microstructure and Rheological Properties of Sodium Alginate-Pectin-Whey Protein Isolate Stabilized Β-Carotene Emulsions: To Improve Stability and Achieve Gastrointestinal Sustained Release

Sodium alginate (SA)-pectin (PEC)-whey protein isolate (WPI) complexes were used as an emulsifier to prepare β-carotene emulsions, and the encapsulation efficiency for β-carotene was up to 93.08%. The confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) images showed that the SA-PEC-WPI emulsion had a compact network structure. The SA-PEC-WPI emulsion exhibited shear-thinning behavior and was in a semi-dilute or weak network state. The SA-PEC-WPI stabilized β-carotene emulsion had better thermal, physical and chemical stability. A small amount of β-carotene (19.46 ± 1.33%) was released from SA-PEC-WPI stabilized β-carotene emulsion in simulated gastric digestion, while a large amount of β-carotene (90.33 ± 1.58%) was released in simulated intestinal digestion. Fourier transform infrared (FTIR) experiments indicated that the formation of SA-PEC-WPI stabilized β-carotene emulsion was attributed to the electrostatic and hydrogen bonding interactions between WPI and SA or PEC, and the hydrophobic interactions between β-carotene and WPI. These results can facilitate the design of polysaccharide-protein stabilized emulsions with high encapsulation efficiency and stability for nutraceutical delivery in food and supplement products.

Fabrication of Zein-Lecithin-EGCG complex nanoparticles: Characterization, controlled release in simulated gastrointestinal digestion

The Zein-Lecithin-Epigallocatechin gallate (EGCG) complex nanoparticles were fabricated by anti-solvent coprecipitation method. The Zein-Lecithin (Z-L) nanocomplexes exhibited great encapsulation efficiency of 68.5% for EGCG, and the encapsulated EGCG still had good antioxidative capacity. The cumulative release of EGCG in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) were 19% and 92%, respectively, and the release was closest to Fick release in SGF and First release in SIF. Fluorescence spectroscopy (FL), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) experiments revealed that the EGCG was successfully encapsulated by Z-L nanocomplexes through electrostatic, hydrophobic and hydrogen bonding interactions. The Zein-Lecithin-EGCG complex nanoparticles exhibited excellent stability and great sustained-release performance, which will be the alternative for potential application in the food industry.

Preparation of β-lactoglobulin/gum arabic complex nanoparticles for encapsulation and controlled release of EGCG in simulated gastrointestinal digestion model

In this work, the β-lactoglobulin/gum arabic (β-Lg-GA) complexes were prepared to encapsulate epigallocatechin gallate (EGCG), forming β-Lg-GA-EGCG complex nanoparticles with an average particle size of 133 nm. The β-Lg-GA complexes exhibited excellent encapsulation efficiency (84.5%), and the antioxidant performance of EGCG in vitro was improved after encapsulation. It was recorded that 86% of EGCG could be released in simulated intestinal fluid after 3 h of digestion, much faster than that in simulated gastric fluid, indicating that the β-Lg-GA complexes were effective in enhancing EGCG stability, which was confirmed using SDS-PAGE and SEM. Further spectrum results demonstrated that various intramolecular interactions including electrostatic, hydrophobic and hydrogen bonding interactions contribute to the formation of β-Lg-GA-EGCG complex nanoparticles. Also, XRDexperiments indicated that EGCG was successfully encapsulated by β-Lg-GA complexes. Therefore, the β-Lg-GA complexes hold great potentials in the protective delivery of sensitive bioactives.