Modulating process parameters to change physical properties of bigels for food applications

Phase inversion regulable bigels co-stabilized by Chlorella pyrenoidosa protein and beeswax: In-vitro digestion and food 3D printing

Algal proteins are an emerging source of functional foods. Herein, Chlorella pyrenoidosa protein (CPP)/xanthan gum-based hydrogels (HG) and beeswax-gelled oleogels (OG) are adopted to fabricate bigels. The phase inversion of bigels can be regulated by the ratio of OG and HG: As the OG increased, bigels turn from OG-in-HG (OG/HG) to a semicontinuous state and then HG-in-OG (HG/OG). In OG/HG bigels (OG ≤ 50 %), hydrophilic CPP acts as the emulsifier at the interface of OG and HG, while beeswax emulsifies the system in HG/OG bigels (OG = 80 %). A semicontinuous bigel appears during the transition between HG/OG and OG/HG. The increase of OG can enhance the viscoelasticity, hardness, adhesiveness, chewiness, and thermal stability. OG/HG bigels exhibit stronger thixotropic recovery and oil-holding capacity than HG/OG bigels. In the in-vitro digestion and food 3D printing, the high specific surface area and the highest thixotropic recovery caused by the emulsion structure of the OG/HG bigel (OG = 50 %) are conducive to the release of free fatty acids and molding of 3D-printed objects, respectively. This study provides a new approach to structure the gelled water-oil system with CPP and helps to develop edible algal proteins-based multiphase systems in food engineering or pharmacy.

Effect of different gelators on the physicochemical properties and microstructure of coconut oleogels

BACKGROUND

The inherent properties of coconut oil (CO), including its elevated saturated fatty acid content and low melting point, make it suitable for application in plastic fat processing. The present study explores the physicochemical characteristics, micromorphology and oxidative stability of oleogels produced from CO using various gelators [ethylcellulose (EC), β-sitosterol/γ-oryzanol (PS) and glyceryl monostearate (MG)] to elucidate the formation mechanisms of coconut oleogels (EC-COO, PS-COO and MG-COO).

RESULTS

Three oleogel systems exhibited a solid-like behavior, with the formation of crystalline forms dominated by β and β'. Among them, PS-COO exhibited enhanced capability with respect to immobilizing liquid oils, resulting in solidification with high oil-binding capacity, moderate hardness and good elasticity. By contrast, MG-COO demonstrated inferior stability compared to PS-COO and EC-COO. Furthermore, MG-COO and PS-COO demonstrated antioxidant properties against CO oxidation, whereas EC-COO exhibited the opposite effect. PS-COO and EC-COO exhibited superior thermodynamic behavior compared to MG-COO.

CONCLUSION

Three oleogels based on CO were successfully prepared. The mechanical strength, storage modulus and thermodynamic stability of the CO oleogel exhibited concentration dependence with increasing gelling agent addition. PS-COO demonstrated relatively robust oil-binding capacity and oxidative stability, particularly with a 15% PS addition. This information contributes to a deeper understanding of CO-based oleogels and offers theoretical insights for their application in food products. © 2024 Society of Chemical Industry.

Recent Advances in Lipid Crystallization in the Food Industry

This review discusses fundamental concepts of fat crystallization and how various processing conditions such as crystallization temperature, cooling rate, and shear or agitation affect this process. Traditional methods used to process fats, such as the use of scraped surface heat exchangers, fractionation, and interesterification, are described. Parameters that affect fat crystallization in these systems, such as shear, crystallization temperature, type of fat, and type of process, are discussed. In addition, the use of minor components to induce or delay fat crystallization based on their chemical composition is presented. The use of novel technologies, such as high-intensity ultrasound, oleogelation, and high-pressure crystallization is also reviewed. In these cases, acoustic and high-pressure process parameters, the various types of oleogels, and the use of oleogelators of differing chemical compositions are discussed. The combination of all these techniques and future trends is also presented.

A novel edible solid fat substitute: Preparation of biphasic stabilized bigels based on glyceryl monolaurate and gellan gum

Solid fats contribute to a delicate and pleasant flavor for food, but its excessive intake increases the risk of cardiovascular disease. Bigel is considered a promising solid fat substitute as it significantly reduces fat content while meeting consumer demands for food flavor and a balanced diet. In this study, bigels were prepared by mixing glyceryl monolaurate-based oleogel (10 wt%) and gellan gum-based hydrogel (0.8 wt%) at ratios of 1:3, 1:1, and 3:1. The microscopic results indicated that the oleogel/hydrogel ratios influenced the structure of bigels, forming oil-in-water, bi-continuous, and water-in-oil bigels with the increase of oleogel proportion, respectively. All bigels presented a semi-solid structure dominated by elasticity, and their hardness, gumminess, chewiness, and cohesiveness increased with the enhancement of hydrogel proportion. Among them, the bigels (S25:L75 and S25:H75) prepared with an oleogel/hydrogel ratio of 1:3 showed excellent freeze-thaw stability, maintaining an oil holding capacity of >95 % after three freeze-thaw cycles. Meanwhile, they also presented good oxidative stabilities, where the peroxide values and malondialdehyde contents were below 0.07 g/100 g and 1.5 mg MDA/kg at 12 d, respectively. Therefore, S25:L75 and S25:H75 are expected to be green, low-cost, healthy, and sustainable alternatives to solid fats.

Development and characterization of hydrogel-in-oleogel (bigel) systems and their application as a butter replacer for bread making

BACKGROUND

Butter has been widely used in bakery products and it contains high level of saturated fats. However, excessive consumption of saturated fats would increase the risk of chronic disease. This study was to fabricate water-in-oil (W/O) type bigels as butter replacers to improve the quality attributes of breads.

RESULTS

A stable water-in-oil (W/O) type bigel system was fabricated based on mixed oleogelators (rice bran wax and glycerol monostearate) and sodium alginate hydrogel. The ratios of oleogel to hydrogel could significantly affect the stability, microstructure and rheological properties of bigels. All of the bigels exhibited solid-like properties, with increased oleogel fractions, and the network structure of bigel became more compact and orderly with smaller sodium alginate gel particles. Meanwhile, the viscoelastic modulus and firmness of bigel increased, contributing to a higher stability. The bigel dough exhibited lower gel strength and relatively higher extensibility compared to the butter dough. Regardless of oleogel fractions, all the bigel produced bread with a higher specific volume and softer texture than the butter bread. When the oleogel fractions was less than 80%, increasing the oleogel fractions was more beneficial for improving the specific volume, softness and fluffy structure of bread.

CONCLUSION

W/O type bigel as butter replacers showed great potential in improving the appearance, structure and textural properties of bread. © 2023 Society of Chemical Industry.

Effect of the gelling mechanism on the physical properties of bigels based on whey protein isolate

The effect of the cold-set and heat-set gelling mechanism of whey protein isolate on bigel production was assessed. For this purpose, hydrogel phase was produced with whey protein isolated (10 % w/v) and for oleogel sunflower oil and glycerol monostearate (7.5 % w/v) were used. Bigels were produced by hot emulsification of different hydrogel:oleogel ratios (from 90:10 up to 10:90). For cold-set bigels (CSB) NaCl (200 mM) was added to the aqueous phase prior to the emulsification and the emulsion was cooled to promote the 3D network formation. On the other hand, heat-set bigels (HSB) were produced by heating the emulsion (80 °C, 60 min). Bigels were evaluated through microscopy, FTIR, thermal and texture analyzes. Results showed that depending on the hydrogel:oleogel ratio and gelling mechanism different structures organization were obtained. CSB were more organized, showing that the rate of gelation was the mechanism responsible for the structure. However, for HSB the heat treatment destabilized the emulsion and disorganized structures were observed for high oleogel content. FTIR corroborates the visual observation and showed that the arrangement was purely physical. In addition, the structural arrangement led to different mechanical properties. In general, HSB produced gels with rubber-like behavior, higher elasticity modulus and the presence of a breaking point. In contrast, CSB behaves as squeezing gel, with no breaking point and lower values of elasticity modulus. Moreover, for O/W bigels the dispersed oleogel particles disrupted the WPI network decreasing the gel strength in comparison to pure hydrogels. However, for systems where oleogel was the continuous phase, the gel strength was recovered due to the metastable and dynamic character of these systems. Thus, results showed that the gelling mechanism of the protein exerted an effect on the physical properties of bigels. In addition, the mechanical properties also can be modulated according to the bigel composition, allowing its application in products with different sensorial characteristics.

A biocompatible lipid-based bigel for topical applications

The development of biocompatible delivery systems is a necessity for medical and topical applications. Herein, the development of a new bigel for topical application is described. It is composed of 40% colloidal lipid hydrogel and 60% olive oil and beeswax oleogel. Its characterization and the potential of the bigel as a drug carrier through the skin was evaluated in vitro using fluorescence microscopy and two phases of the bigel were labeled with two fluorescent probes: sodium fluorescein (hydrophilic phase) and Nile red (lipophilic phase). The structure of the bigel showed two phases with fluorescence microscopy in which the hydrogel phase was incorporated into a continuous oleogel matrix. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) presented a combination of vibrations characteristic of the different molecules forming the bigel, and Differential Scanning Calorimetry (DSC) showed different transitions attributed to beeswax lipids. Small-angle and wide-angle X-ray scattering (SAXS and WAXS) indicated a predominant lamellar structure with orthorhombic lateral packing that could be related to the arrangement of beeswax crystals. Bigel enables deeper penetration of hydrophilic and lipophilic probes into deeper layers, making it a promising candidate for effective topical carriers in medical and dermatological applications.

Bigel formulations based on sesame oleogel with probiotics alginate hydrogel: A novel structure for nutritious spreadable butter

As a replacement for saturated fats, bigel butter spread (BgBs) based on sesame oleogel and alginate hydrogel was developed. Morphology, oxidative stability, microbiological, chemical, and sensory analysis were assessed. The results demonstrated that unsaturated fatty acids were higher in cinnamon (73.87 %) than in plain (71.57 %) BgBs. The peroxide value was higher in plain (5.25 meqO₂/kg) than in cinnamon BgBs (4.29 meqO₂/kg). Cinnamon BgBs had 44.44 % more antioxidant activity compared to plain BgBs (40.20 %). Moreover, BgBs products kept their probiotic counts at >7 log cycles. The cinnamon BgBs had a lower microbial load than plain BgBs. The chemical composition of the BgBs products did not change significantly. But the pH values slightly dropped with the storage time. The sensory evaluation of plain and cinnamon BgBs did not significantly differ from one another. However, the period of storage and the addition of the cinnamon oil significantly affected the flavor ratings.

Bigels as Fat Replacers in Fermented Sausages: Physicochemical, Microbiological, Sensory, and Nutritional Characteristics

Olive oil bigels structured with monoglycerides, gelatin, and κ-carrageenan were designed for the partial substitution of pork backfat in fermented sausages. Two different bigels were used: bigel B60 consisted of 60% aqueous and 40% lipid phase; and bigel B80 was formulated with 80% aqueous and 20% lipid phase. Three different pork sausage treatments were manufactured: control with 18% pork backfat; treatment SB60 with 9% pork backfat and 9% bigel B60; and treatment SB80 with 9% pork backfat and 9% bigel B80. Microbiological and physicochemical analyses were carried out for all three treatments on 0, 1, 3, 6, and 16 days after sausage preparation. Bigel substitution did not affect water activity or the populations of lactic acid bacteria, total viable counts, Micrococcaceae, and Staphylococcacea during the fermentation and ripening period. Treatments SB60 and SB80 presented higher weight loss during fermentation and higher TBARS values only on day 16 of storage. Consumer sensory evaluation did not identify significant differences among the sausage treatments in color, texture, juiciness, flavor, taste, and overall acceptability. The results show that bigels can be utilized for the formulation of healthier meat products with acceptable microbiological, physicochemical, and organoleptic characteristics.

Effect of Potato Starch Hydrogel:Glycerol Monostearate Oleogel Ratio on the Physico-Rheological Properties of Bigels

Bigel (BG) has been shown to be promising for the food industry due to the possibility to manipulate the properties of the system by adjusting the ratio of each individual phase, namely the hydrogel (H) and oleogel (O) phases. This work aimed to evaluate the influence of the O:H ratio on the physical-rheological properties of BG produced with potato starch (PS) and glycerol monostearate (GM). The hydrogel hardness (i.e., 1423.47 g) directly influenced the viscosity of the BG samples, as BG with a higher H-phase presented the highest viscosity and firmness. All BG samples presented shear-thinning behavior and structural breakdown at ~50 °C. BG with a higher O-phase had superior results for thermal stability, softer texture, and yield stress values, representative of good plasticity and spreadability, as compared to BG with less O-phase. The BG with 80% H-phase was less stable during the 21 days of storage in relation to the other BG samples. This study showed the role that the O:H ratio plays in the development of PS-GM-based BGs with tailor-made physical-rheological properties. In addition, the BG is an easily reproduced system with great potential to be used as a trans and saturated fat substitute in food applications.

Novel Formulation of Bigel-Based Vegetable Oil Spreads Enriched with Lingonberry Pomace

In this study, bigel-based vegetable oil spreads with lingonberry pomace addition were prepared. The impact of gelatin, agar and collagen was examined as structuring agents as was the effect of lecithin concentration (0.5, 1.0, 1.5%). Prepared systems were evaluated by physical and chemical stability and structural and rheological properties. It was found that all bigel formulations were self-standing with no signs of phase separation at ambient temperature immediately after preparation and after two weeks of storage at 4 °C temperature. The lingonberry pomace addition affected grainy structure formation with homogenous and uniform distribution of fiber particles throughout the bigel matrix and it also altered the colour of the bigels toward a purple-red. Texture, rheological properties and colour of the spread formulations were affected by the type of the structuring agent as well as the lecithin concentration. The presence of the lingonberry pomace enhanced the resistance of the bigel samples to the oxidation process and it was confirmed by the DPPH^• inhibition, peroxide value and oxipress test. Overall, the formulated bigel-based spreads could be beneficial and had a potential application as healthier fat spreads and be a source of dietary fibers (11 g of fibre per 100 g of the spread).

Food-Grade Bigels with Potential to Replace Saturated and Trans Fats in Cookies

Fats play multiple roles in determining the desirable characteristics of foods. However, there are health concerns about saturated and trans fats. Bigels have been proposed as a novel fat replacer in foods. This research evaluated the role of the type of hydrogel in the development of bigels to be used as fat replacers in cookies. Bigels were made with beeswax/canola oil oleogel and sodium alginate and carboxymethylcellulose hydrogels. The results showed that the peroxide value and binding capacity of bigels were affected by the type of hydrogel used. However, their fatty acid profile, p-anisidine value, oxidative stability, and texture remained unchanged. Using bigels as fat replacers, cookies were obtained with a hardness similar to those with original shortening, showing the potential of bigels for use in foods.

Latest developments in food-grade delivery systems for probiotics: A systematic review

Tremendous progress in the inseparable relationships between probiotics and human health has enabled advances in probiotic functional foods. To ensure the vitality of sensitive probiotics against multiple harsh conditions, rising food-grade delivery systems for probiotics have been developed. This review gives a summary of recently reported delivery vehicles for probiotics, analyzes their respective merits and drawbacks and makes comparisons among them. Subsequently, the applications and future prospects are discussed. According to the types of encapsulating probiotics, food-grade delivery systems for probiotics can be classified into "silkworm cocoons" and "spider webs", which are put forward in this paper. The former, which surrounds the inner probiotics with the outer protective layers, includes particles, emulsions, beads, hybrid electrospun nanofibers and microcapsules. While hydrogels and bigels belong to the latter, which protects probiotics with the aid of network structures. The future prospects include preferable viability and stability of probiotics, co-delivery systems, targeted gut release of probiotics, delivery of multiple strains, more scientific experimental verification and more diversified food products, which will enlighten further studies on delivering probiotics for human health. Taken together, delivery vehicles for probiotics are-or will soon be-in the field of food science, with further applications under development.

Development and characterization of novel bigels based on monoglyceride-beeswax oleogel and high acyl gellan gum hydrogel for lycopene delivery

The aim of present study was to develop novel bigels as a semi-solid vehicle for lycopene delivery. Bigels were prepared by using the mixture of glycerol monostearate (GMS)-beeswax based oleogel and high acyl gellan gum hydrogel in different proportions. The confocal microscopic observations showed that the obtained bigels were oleogel-in-hydrogel, and droplets became larger with increased contents of oleogel. Higher fractions of oleogel increased the mechanical strength (storage modulus, firmness) of bigels. According to the rheological results, all bigels exhibited solid-like characteristics since the storage modulus were larger than loss modulus. DSC results showed that the melting temperature of bigel was higher than that of oleogel. During in vitro simulated gastrointestinal digestion, the total release percentages varied from 60% to 80%, and a higher content of oleogel within bigels could slower down the release of lycopene, suggesting that a higher proportion of oleogel was beneficial for delivery of fat-soluble nutraceuticals.