Direct Analysis in Real Time (DART) and a portable mass spectrometer for rapid identification of common and designer drugs on-site

Pesticides in the environment: Degradation routes, pesticide transformation products and ecotoxicological considerations

Among rising environmental concerns, emerging contaminants constitute a variety of different chemicals and biological agents. The composition, residence time in environmental media, chemical interactions, and toxicity of emerging contaminants are not fully known, and hence, their regulation becomes problematic. Some of the important groups of emerging contaminants are pesticides and pesticide transformation products (PTPs), which present a considerable obstacle to maintaining and preserving ecosystem health. This review article aims to thoroughly comprehend the occurrence, fate, and ecotoxicological importance of pesticide transformation products (PTPs). The paper provides an overview of pesticides and PTPs as contaminants of emerging concern and discusses the modes of degradation of pesticides, their properties and associated risks. The degradation of pesticides, however, does not lead to complete destruction but can instead lead to the generation of PTPs. The review discusses the properties and toxicity of PTPs and presents the methods available for their detection. Moreover, the present study examines the existing regulatory framework and suggests the need for the development of new technologies for easy, routine detection of PTPs to regulate them effectively in the environment.

Rapid Separation and Detection of Drugs in Complex Biological Matrix Using TD-CDI Mass Spectrometer

The drug detection technology plays a pivotal role in the domains of pharmaceutical regulation and law enforcement. In this study, we introduce a method that combines thermal desorption corona discharge ionization (TD-CDI) with mass spectrometry for efficient drug detection. The TD-CDI module, characterized by its compact and simple design, enables the separation of analytes within seconds and real-time presentation of one or two analyte peaks on the mass spectrum most of the time, which reduces matrix interference and improves detection performance. Through experimental investigation, we studied the characteristics of TD-CDI for analyte separation and detection, even with the same mass number, and optimized the TD-CDI approach. TD-CDI-MS was employed for the rapid detection of drugs in various traditional medicine, food products, and human samples. Additionally, by utilizing TD-CDI for segmented hair direct analysis, it becomes possible to trace the drug usage cycle of individuals. This underscores the feasibility of the proposed analytical method within the realm of drug detection.

Development of a rapid-fire drug screening method by probe electrospray ionization tandem mass spectrometry for human urine (RaDPi-U)

Drug screening tests are mandatory in the search for drugs in forensic biological samples, and immunological methods and mass spectrometry (e.g., gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry) are commonly used for that purpose. However, these methods have some drawbacks, and developing new screening methods is required. In this study, we develop a rapid-fire drug screening method by probe electrospray ionization tandem mass spectrometry (PESI-MS/MS), which is an ambient ionization mass spectrometry method, for human urine, named RaDPi-U. RaDPi-U is carried out in three steps: (1) mixing urine with internal standard (IS) solution and ethanol, followed by vortexing; (2) pipetting the mixture onto a sample plate for PESI; and (3) rapid-fire analysis by PESI-MS/MS. RaDPi-U targets 40 forensically important drugs, which include illegal drugs, hypnotics, and psychoactive substances. The analytical results were obtained within 3 min because of the above-mentioned simple workflow of RaDPi-U. The calibration curves of each analyte were constructed using the IS method, and they were quantitatively valid, resulting in good linearity (0.972-0.999) with a satisfactory lower limit of detection and lower limit of quantitation (0.01-7.1 ng/mL and 0.02-21 ng/mL, respectively). Further, both trueness and precisions were 28% or less, demonstrating the high reliability and repeatability of the method. Finally, we applied RaDPi-U to three postmortem urine specimens and successfully detected different drugs in each urine sample. The practicality of the method is proven, and RaDPi-U will be a strong tool as a rapid-fire drug screening method not only in forensic toxicology but also in clinical toxicology.

Rapid screening of riot control agents using DART-TD-HRMS

PURPOSE

Riot Control Agents (RCAs) are chemicals used in law enforcement for non-lethal riot control and use in conflicts between states that violates the Chemical Weapons Convention. OPCW's Scientific Advisory Board has identified sixteen potential RCAs including capsaicinoids, CS, and CR. RCAs may be misused for criminal purposes, so methods for detecting such misuse are needed. This study therefore evaluates the feasibility of a rapid, high throughput screening method of RCAs on surfaces (particularly clothing surfaces) by Direct Analysis in Real Time with a thermal desorption unit coupled to high-resolution mass spectrometry (DART-TD-HRMS).

METHODS

A broadly applicable method for detecting potential RCAs was developed and tested on cotton fabric samples sprayed with self-defence sprays from an in-house reference stock. The feasibility of detecting RCAs by direct analysis of surface wipe samples placed in the DART source was also investigated.

RESULTS

The method detected all sixteen RCAs and contaminated clothing were successfully screened for active agents in a reference collection of self-defence sprays. A pilot study also showed that RCAs can be detected by holding a sample directly in front of the DART source.

CONCLUSION

DART-TD-HRMS enables rapid and simple screening of RCAs on fabric samples enabling a high sample throughput.

Application of a Modified 3D-PCSI-MS Ion Source to On-Site, Trace Evidence Processing via Integrated Vacuum Collection

Trace evidence, including hair, fibers, soil/dust, and gunshot residue (GSR), can be recovered from a crime scene to help identify or associate a suspect with illegal activities via physical, chemical, and biological testing. Vacuum collection is one technique that is employed in recovering such trace evidence but is often done so in a targeted manner, leaving other complementary, chemical-specific information unexamined. Here, we describe a modified 3D-printed cone spray ionization (3D-PCSI) source with integrated vacuum collection for on-site, forensic evidence screening, allowing the processing of targeted physical traces and nontargeted chemical species alike. The reported form factor allows sample collection, onboard extraction, filtration, and spray-based ionization in a singular vessel with minimal handling of evidence by the operator. Utilizing authentic forensic evidence types and portable MS instrumentation, this new method was characterized through systematic studies that replicate CSI applications. Reliability in the form of false positive/negative response rates was determined from a modest, user-blinded data set, and other attributes, such as collection efficacy and detection limit, were examined.

A strategy for the detection of benzodiazepine drugs using low-resolution paper-spray mass spectrometry for harm reduction drug checking

The ability to detect newly emerging substances is of great importance in reducing harms for people who use drugs. New psychoactive substances including novel benzodiazepines in the illicit drug supply have been linked to high rates of overdose deaths while complicating drug checking as an overdose prevention strategy. Paper-spray mass spectrometry (PS-MS) has emerged as a novel strategy to rapidly detect trace components in street drug samples. While targeted, low-resolution PS-MS methods have proven effective, newly emerging substances are often missed. To address this, a method was applied to low-resolution full-scan PS-MS data to aid in the early detection and identification of novel benzodiazepines in the unregulated drug supply. Using the developed method, true positives rates of 0.89 and 0.75 were achieved for bromazolam and etizolam in street samples obtained in a community drug checking service. The applicability of the method was further demonstrated for a novel benzodiazepine, desalkylgidazepam, that has recently emerged in the illicit drug supply.

Direct analysis in real-time mass spectrometry: Observations of helium, nitrogen and argon as ionisation gas for the detection of small molecules using a single quadrupole instrument

RATIONALE

Direct analysis in real time is typically performed using helium as the ionisation gas for the detection of analytes by mass spectrometry (MS). Nitrogen and argon are found with abundance in the air and provide a cheaper and greener alternative to the use of helium as ionisation gas. This study explores the use of helium, nitrogen and argon as ionisation gas for the detection of organic compounds.

METHODS

Four illicit drugs, two amino acids and five explosives were chosen as target analytes to understand selectivity, sensitivity and linearity when helium, nitrogen or argon was used as the ionisation gas with the direct analysis in real time (DART) source. Analysis was carried out on a Waters Acquity QDa single quadrupole mass spectrometer.

RESULTS

Calibration curves over the range of 5-100 ng were produced for each analyte using the different ionisation gases to assess the instrument response. Nitrogen gave a higher response to concentration than helium or argon; however, the lowest limits of detection were observed when helium was used.

CONCLUSIONS

All the target analytes were detected using DART-MS with helium, nitrogen or argon as the ionisation gas. Whereas helium provided the highest sensitivity, nitrogen produced reasonable limits of detection and had good linearity across the concentration range explored, suggesting it provides a greener and cheaper alternative to helium.

Ambient ionization mass spectrometry applied to new psychoactive substance analysis

In the past decade a plethora of drugs with similar effects to controlled psychoactive drugs, like cannabis, amfetamine (amphetamine), or lysergic acid diethylamide, have been synthesized. These drugs can collectively be classified under the term new psychoactive substances (NPS) and are used for recreational purposes. The novelty of the substances, alongside the rapid rate of emergence and structural variability, makes their detection as well as their legal control highly challenging, increasing the demand for rapid and easy-to-use analytical techniques for their detection and identification. Therefore, interest in ambient ionization mass spectrometry applied to NPS has grown in recent years, which is largely because it is relatively fast and simple to use and has a low operating cost. This review aims to provide a critique of the suitability of current ambient ionization techniques for the analysis of NPS in the forensic and clinical toxicology fields. Consideration is given to analytical performance and ease of implementation, including ionization efficiency, selectivity, sensitivity, quantification, analyte chemistry, molecular coverage, validation, and practicality.

Onsite Identification and Spatial Distribution of Air Pollutants Using a Drone-Based Solid-Phase Microextraction Array Coupled with Portable Gas Chromatography-Mass Spectrometry via Continuous-Airflow Sampling

Hazardous air pollutants can be unintentionally and intentionally released in many cases, such as industrial emissions, accidental events, and pesticide application. Under such events, the onsite operation is highly dependent on the molecular composition and spatial distribution of air pollutants in ambient air. However, it is usually difficult for people to reach hazardous and upper sites rapidly. In this work, we designed a new drone-based microextraction sampler array in which a solid-phase microextraction (SPME) fiber was mounted on drones for remote-control sampling at different spaces and was then coupled with a portable gas chromatography-mass spectrometry (PGC-MS) approach for quickly identifying hazardous air pollutants and their spatial distribution in ambient air within minutes. Acceptable analytical performances, including good sensitivity (detection limit at nanogram per liter level), reproducibility (relative standard deviation < 20%, n = 6), analytical speed (single sample within minutes), and excellent linear dynamic response (3 orders of magnitude) were obtained for direct measurement of air samples. The drone-SPME sampling mechanism of air pollutants involving an airflow adsorptive microextraction process was proposed. Overall, this drone-SPME sampling array can access hard-to-reach and dangerous environmental sites and provide air pollution distribution in different spaces, showing versatile potential applications in environmental analysis.

Portable mass spectrometry system: instrumentation, applications, and path to 'omics analysis

Mass spectrometry (MS) is an information rich analytical technique and plays a key role in various 'omics studies. Standard mass spectrometers are bulky and operate at high vacuum, which hinder their adoption by the broader community and utility in field applications. Developing portable mass spectrometers can significantly expand the application scope and user groups of MS analysis. This review discusses the basics and recent advancements in the development of key components of portable mass spectrometers including ionization source, mass analyzer, detector, and vacuum system. Further, major areas where portable mass spectrometers are applied are also discussed. Finally, a perspective on the further development of portable mass spectrometers including the potential benefits for 'omics analysis is provided.

Ambient Ionization Mass Spectrometry: Application and Prospective

Mass spectrometry (MS) is a formidable analytical tool for the analysis of non-polar to polar compounds individually and/or from mixtures, providing information on the molecular weights and chemical structures of the analytes. During the last more than one-decade, ambient ionization mass spectrometry (AIMS) has developed quickly, producing a wide range of platforms and proving scientific improvements in a variety of domains, from biological imaging to quick quality control. These methods have made it possible to detect target analytes in real time without sample preparation in an open environment, and they can be connected to any MS system with an atmospheric pressure interface. They also have the ability to analyze explosives, illicit drugs, disease diagnostics, drugs in biological samples, adulterants in food and agricultural products, reaction progress, and environmental monitoring. The development of novel ambient ionization techniques, such as probe electrospray ionization, paper spray ionization, and fiber spray ionization, employed even at picolitre to femtolitre solution levels to provide femtogram to attogram levels of the target analytes. The special characteristic of this ambient ion source, which has been extensively used, is the noninvasive property of PESI of examination of biological real samples. The results in the current review supports the idea that AIMS has emerged as a pioneer in MS-based approaches and that methods will continue to be developed along with improvements to existing ones in the near future.

Trace Residue Identification, Characterization and Longitudinal Monitoring of the Novel Synthetic Opioid β-U10, from Discarded Drug Paraphernalia

Empirical data regarding dynamic alterations in illicit drug supply markets in response to the COVID-19 pandemic, including the potential for introduction of novel drug substances and/or increased poly-drug combination use at the 'street' level, i.e., directly proximal to the point of consumption, is currently lacking. Here, a high-throughput strategy employing ambient ionization-mass spectrometry is described for the trace residue identification, characterization and longitudinal monitoring of illicit drug substances found within >6,600 discarded drug paraphernalia (DDP) samples collected during a pilot study of an early warning system for illicit drug use in Melbourne, Australia from August 2020-February 2021, while significant COVID-19 lockdown conditions were imposed. The utility of this approach is demonstrated for the de novo identification and structural characterization of β-U10, a previously unreported naphthamide analogue within the 'U-series' of synthetic opioid drugs, including differentiation from its α-U10 isomer without need for sample preparation or chromatographic separation prior to analysis. Notably, β-U10 was observed with 23 other drug substances, most commonly in temporally distinct clusters with heroin, etizolam and diphenhydramine, and in a total of 182 different poly-drug combinations. Longitudinal monitoring of the number and weekly 'average signal intensity' (ASI) values of identified substances, developed here as a semi-quantitative proxy indicator of changes in availability, relative purity and compositions of street level drug samples, revealed that increases in the number of identifications and ASI for β-U10 and etizolam coincided with a 50% decrease in the number of positive detections and an order of magnitude decrease in the ASI for heroin.

Application of direct analysis in real-time mass spectrometry (DART-MS) in forensic science: a comprehensive review

Background

As the rate of crime is constantly increasing, the workload on the forensic analyst also piles up. The availability of a limited number of seized samples makes it crucial to directly analyze the sample, thereby preventing wastage in the prior steps of sample preparation. Due to such needs, the forensic community is consistently working on broadening the usage of direct analysis in real-time mass spectrometry (DART-MS). DART-MS is a relatively new technique for rapid mass spectral analysis. Its use for chemical analysis credits its ability to analyze the sample at atmospheric pressure.

Main body

This article gives insight into the ionization mechanisms, data analysis tools, and the use of hyphenated techniques like thermal-desorption-DART-MS, infrared-thermal-desorption-DART-MS, Joule-heating thermal-desorption-DART-MS, etc. This review summarizes the applications of DART-MS in the field of Forensic Science reported from 2005 to 2021. The applications include analysis of drugs, warfare agents, gun-shot residues, ink differentiation, and other forensically relevant samples. The paper also presents the relation between the type of DART-MS technique and the ionization mode used for a particular class of compounds.

Conclusion

The review follows that the high-resolution mass-spectrometers or low-resolution mass-spectrometers systems in the positive or negative mode were highly dependent on the type of analyte under investigation. Drugs, inks, dyes, and paints were mainly analyzed using the positive ionization mode in the HRMS technique. The examinations of fire accelerants predominantly used the positive ionization mode in the LRMS technique. Moreover, the limit of detection values obtained from the qualitative screening of street drugs were of ppb level, indicating high sensitivity of DART-MS. Considering the work done in the past years, there are potential future research needs of this technology, especially in forensic science.

Graphical Abstract

Early Warning System for Illicit Drug Use at Large Public Events: Trace Residue Analysis of Discarded Drug Packaging Samples

Inspired by Locard's exchange principle, which states "every contact leaves a trace", a trace residue sampling strategy has been developed for the analysis of discarded drug packaging samples (DPS), as part of an early warning system for illicit drug use at large public events including music/dance festivals. Using direct analysis in real time/mass spectrometry and tandem mass spectrometry, rapid and high-throughput identification and characterization of a wide range of illicit drugs and adulterant substances was achieved, including in complex polydrug mixtures and at low relative ion abundances. A total of 1362 DPS were analyzed either off-site using laboratory-based instrumentation or on-site and in close to real time using a transportable mass spectrometer housed within a mobile analytical laboratory, with each analysis requiring less than 1 min per sample. Of the DPS analyzed, 92.2% yielded positive results for at least one of 15 different drugs and/or adulterants, including cocaine, MDMA, and ketamine, as well as numerous novel psychoactive substances (NPS). Also, 52.6% of positive DPS were found to contain polydrug mixtures, and a total of 42 different drug and polydrug combinations were observed throughout the study. For analyses performed on-site, reports to key stakeholders including event organizers, first aid and medical personnel, and peer-based harm reduction workers could be provided in as little as 5 min after sample collection. Following risk assessment of the potential harms associated with their use, drug advisories or alerts were then disseminated to event staff and patrons and subsequently to the general public when substances with particularly toxic properties were identified.

FIELDABLE MASS SPECTROMETRY FOR FORENSIC SCIENCE, HOMELAND SECURITY, AND DEFENSE APPLICATIONS

Mass spectrometry is commonly used in forensic chemistry laboratories for sensitive, definitive analysis. There have been significant efforts to bring mass spectrometry analysis on-site through the development of ruggedized, fieldable instruments. Testing samples in the field is of particular interest in forensic science, homeland security, and defense applications. In forensic chemistry, testing seized drugs in the field can significantly improve efficiencies in processing of related criminal cases. The screening of passengers and luggage at transportation hubs is a critical need for homeland security for which mass spectrometry is well suited to provide definitive answers with low false positive rates. Mass spectrometry can yield reliable data for military personnel testing sites for potential chemical weapons release. To meet the needs of the forensic and security communities fieldable mass spectrometers based on membrane inlet systems and hybrid gas chromatography systems have been developed and commercialized. More recently developed ambient ionization mass spectrometry methods can eliminate the time, equipment, and expertise associated with sample preparation, and so are especially appealing for on-site analysis. We describe the development of fieldable mass spectrometry systems, with emphasis on commercially available systems that have been deployed for on-site analysis of seized drugs, chemical warfare agents, explosives, and other analytes of interest to the forensic and security communities. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Scopolamine analysis in beverages: Bicolorimetric device vs portable nano liquid chromatography

Scopolamine (SCP) is often involved in sexual assaults and robberies, particularly in recreational environments. Therefore, analytical tools are required for the analysis of this compound amenable for the field. In this work, a sensor for SCP is described based on the entrapment of KMnO₄ into polydimethylsiloxane (PDMS). The possibility of using KMnO₄ in combination with the reagent 1,2-naphtoquinone-4-sulfonate (NQS) giving a double sensor acting as a bicolorimetric device is also demonstrated. In contact with the sample, the PDMS composite delivers MnO₄^-, which reacts rapidly with SCP under basic conditions causing a change of the color of the solution that can be related to the concentration of drug using both, absorbances and color coordinates, while the NQS part of the sensor remains unchanged. After an exposure time to the sensors of 10 min, satisfactory linearity was obtained for concentrations of SCP up to 865 μg/mL, being the limit of detection (LOD) 108 μg/mL. A method using a portable nano liquid chromatograph with detection at 255 nm has been also developed; in this case the LOD was 100 μg/mL and the working linear interval was 250-2000 μg/mL. The precision, expressed as relative standard deviation (RDS), was ≤8% for both methods. Different beverages (cola, cola-whisky, tonic water-vodka, red wine and green tea) were assayed. The potential of the two proposed approaches for on-site tests is discussed.

Forensic applications of DART-MS: A review of recent literature

The need for rapid chemical analyses and new analytical tools in forensic laboratories continues to grow due to case backlogs, difficult-to-analyze cases, and identification of previously unseen materials such as new psychoactive substances. To adapt to these needs, the forensics community has been pursuing the use of ambient ionization mass spectrometry, and more specifically direct analysis in real time mass spectrometry (DART-MS), for a wide range of applications. From the inception of DART-MS forensic applications have been researched with demonstrations ranging from drugs of abuse to inorganic gunshot residue to printer inks to insect identification. This article presents a review of research demonstrating the use of DART-MS for forensically relevant samples over the past five years. To provide more context, background on the technique, sampling approaches, and data analysis methods are presented along with a discussion on the potential future and research needs of the technology.

Comparison of in-source collision-induced dissociation and beam-type collision-induced dissociation of emerging synthetic drugs using a high-resolution quadrupole time-of-flight mass spectrometer

In-source collision-induced dissociation (CID) is commonly used with single-stage high-resolution mass spectrometers to gather both a molecular formula and structural information through the collisional activation of analytes with residual background gas in the source region of the mass spectrometer. However, unlike tandem mass spectrometry, in-source CID does not involve an isolation step prior to collisional activation leading to a product ion spectrum composed of fragment ions from any analyte present during the activation event. This work provides the first comparison of in-source CID and beam-type CID spectra of emerging synthetic drugs on the same instrument to understand the fragmentation differences between the two techniques and to contribute to the scientific foundations of in-source CID. Electrospray ionization-quadrupole time-of-flight (ESI-Q-TOF) mass spectrometry was used to generate product ion spectra from in-source CID and beam-type CID for a series of well-characterized fentanyl analogs and synthetic cathinones. A comparison between the fragmentation patterns and relative ion abundances for each technique was performed over a range of fragmentor offset voltages for in-source CID and a range of collision energies for beam-type CID. The results indicate that large fragmentor potentials for in-source CID tend to favor higher energy fragmentation pathways that result in both kinetically favored pathways and consecutive neutral losses, both of which produce more abundant lower mass product ions relative to beam-type CID. Although conditions can be found in which in-source CID and beam-type CID provide similar overall spectra, the in-source CID spectra tend to contain elevated noise and additional chemical background peaks relative to beam-type CID.

MASS SPECTROMETRY ANALYSIS OF DRUGS OF ABUSE: CHALLENGES AND EMERGING STRATEGIES

Mass spectrometry has been the "gold standard" for drugs of abuse (DoA) analysis for many decades because of the selectivity and sensitivity it affords. Recent progress in all aspects of mass spectrometry has seen significant developments in the field of DoA analysis. Mass spectrometry is particularly well suited to address the rapidly proliferating number of very high potency, novel psychoactive substances that are causing an alarming number of fatalities worldwide. This review surveys advancements in the areas of sample preparation, gas and liquid chromatography-mass spectrometry, as well as the rapidly emerging field of ambient ionization mass spectrometry. We have predominantly targeted literature progress over the past ten years and present our outlook for the future. © 2020 Periodicals, Inc. Mass Spec Rev.

MINIATURIZATION IN MASS SPECTROMETRY

Expectations for continuous miniaturization in mass spectrometry are not declining for years. Portable instruments are highly welcome by the industry, science, space agencies, forensic laboratories, and many other units. All are striving for the small, cheap, and as good as possible instruments. This review describes the recent developments of miniature mass spectrometers and also provides selected applications where these devices are used. Upcoming perspectives of further development are also discussed. @ 2019 John Wiley & Sons Ltd. Mass Spec Rev.

The current role of mass spectrometry in forensics and future prospects

Mass spectrometry (MS) techniques are highly prevalent in crime laboratories, particularly those coupled to chromatographic separations like gas chromatography (GC) and liquid chromatography (LC). These methods are considered "gold standard" analytical techniques for forensic analysis and have been extensively validated for producing prosecutorial evidentiary data. However, factors such as growing evidence backlogs and problematic evidence types (e.g., novel psychoactive substance (NPS) classes) have exposed limitations of these stalwart techniques. This critical review serves to delineate the current role of MS methods across the broad sub-disciplines of forensic science, providing insight on how governmental steering committees guide their implementation. Novel, developing techniques that seek to broaden applicability and enhance performance will also be highlighted, from unique modifications to traditional hyphenated MS methods to the newer "ambient" MS techniques that show promise for forensic analysis, but need further validation before incorporation into routine forensic workflows. This review also expounds on how recent improvements to MS instrumental design, scan modes, and data processing could cause a paradigm shift in how the future forensic practitioner collects and processes target evidence.

Identification and Confirmation of Fentanyls on Paper using Portable Surface Enhanced Raman Spectroscopy and Paper Spray Ionization Mass Spectrometry

Fentanyl and its analogues play a major role in the current opioid epidemic. In particular, these highly potent opioids have become a health hazard due to their use as additives in street drugs. Consequently, rapid on-site procedures for the analysis of this class of seized drugs are needed, especially considering the reported backlog of drug samples, which must undergo identification and confirmation tests to validate the presence of an illicit substance. Paper based devices are cheap sampling and analysis vehicles that have been shown capable of allowing rapid identification and confirmation of drugs of abuse. Modifying paper substrates by imprinting nanoparticles enables surface enhanced Raman spectroscopy (SERS) as well as a second analysis from the same substrate, namely paper spray ionization mass spectrometry. While such a procedure has been described for laboratory use, these illicit drug samples are typically collected in the field and this is where testing should be done. We combine paper SERS and paper spray MS on field-portable and commercial off-the-shelf (COTS) devices for the rapid and low-cost identification and confirmation of fentanyl and its analogues, enabling in situ analysis at the point of seizure of suspect samples. The commercial nature of both instruments moves this technology from the academic realm to a setting where the criminal justice system can realistically utilize it. The capabilities of this single-substrate dual-analyzer technique are further examined by sampling a variety of surfaces of forensic interest.

Filter Cone Spray Ionization Coupled to a Portable MS System: Application to On-Site Forensic Evidence and Environmental Sample Analysis

The complexity of field-borne sample matrices and the instrumental constraints of portable mass spectrometers (MS) often necessitate that preparative steps are added prior to ambient MS methods when operated on-site, but the corresponding decrease in throughput and experimental simplicity can make field operation impractical. To this end, we report a modified ambient MS method, filter cone spray ionization (FCSI), specifically designed for simple, yet robust, processing of bulk forensic evidence and environmental samples using a fieldable MS system. This paper-crafted source utilizes low-cost laboratory consumables to produce a conical structure that serves as a disposable, spray-based ionization source. Integrated extraction and filtration capabilities mitigate sample heterogeneity and carryover concerns and expedite sample processing, as characterized through the analysis of a variety of authentic forensic evidence types (e.g., abused pharma tablets, counterfeit/adulterated tablets, crystal-based drugs, synthetic marijuana, toxicological specimens) and contaminated soil samples. The data presented herein suggests that the FCSI-MS design could prove robust to the rigors of field-borne, bulk sample screening, overcoming the inefficiencies of other ambient MS methods for these sample classes. Novel applications of FCSI-MS are also examined, such as the coupling to trace evidence vacuum filtration media.

Atmospheric Solids Analysis Probe Coupled to a Portable Mass Spectrometer for Rapid Identification of Bulk Drug Seizures

The emergence of ambient ionization techniques and their combination with smaller, cheaper mass spectrometers is beginning to make real the possibility of mass spectrometry measurements being made routinely outside of traditional laboratory settings. Here, we describe the development of an atmospheric solids analysis probe (ASAP) source for a commercially available miniaturized, single-quadrupole mass spectrometer and subsequent modification of the instrument to allow it to run as a deployable system; we further go on to describe the application of this instrument to the identification of the contents of drug seizures. For the drug seizure analysis, a small quantity of the material (powder, tablet, resin, etc.) was dissolved in ethanol and shaken to extract the analytes, the resulting solutions were then sampled by dipping a sealed glass capillary into the solution prior to analysis by ASAP-MS. Identification of the contents of the seizures was carried out using a NIST searching approach utilizing a bespoke spectral library containing 46 compounds representative of those most commonly encountered in UK forensic laboratories. In order to increase confidence in identification the library sample and subsequent analyses were carried out using a four-channel acquisition method; each channel in this method used a different cone voltage (15, 30, 50, and 70 V) inducing differing levels of in-source fragmentation in each channel; the match score across each channel was then used for identification. Using this developed method, a set of 50 real-life drug samples was analyzed with each of these being identified correctly using the library searching method.

Direct Analysis of Aerosolized Chemical Warfare Simulants Captured on a Modified Glass-Based Substrate by "Paper-Spray" Ionization

Paper spray ionization mass spectrometry offers a rapid alternative platform requiring no sample preparation. Aerosolized chemical warfare agent (CWA) simulants trimethyl phosphate, dimethyl methylphosphonate, and diisopropyl methylphosphonate were captured by passing air through a glass fiber filter disk within a disposable paper spray cartridge. CWA simulants were aerosolized at varying concentrations using an in-house built aerosol chamber. A custom 3D-printed holder was designed and built to facilitate the aerosol capture onto the paper spray cartridges. The air flow through each of the collection devices was maintained equally to ensure the same volume of air sampled across methods. Each approach yielded linear calibration curves with R² values between 0.98-0.99 for each compound and similar limits of detection in terms of disbursed aerosol concentration. While the glass fiber filter disk has a higher capture efficiency (≈40%), the paper spray method produces analogous results even with a lower capture efficiency (≈1%). Improvements were made to include glass fiber filters as the substrate within the paper spray cartridge consumable. Glass fiber filters were then treated with ammonium sulfate to decrease chemical interaction with the simulants. This allowed for improved direct aerosol capture efficiency (>40%). Ultimately, the limits of detection were reduced to levels comparable to current worker population limits of 1 × 10^-6 mg/m³.

Infrared Laser Ablation with Vacuum Capture for Fingermark Sampling

Infrared laser ablation coupled to vacuum capture was employed to collect material from fingermarks deposited on surfaces of different porosity and roughness. Laser ablation at 3 μm was performed in reflection mode with subsequent capture of the ejecta with a filter connected to vacuum. Ablation and capture of standards from fingermarks was demonstrated on glass, plastic, aluminum, and cardboard surfaces. Using matrix assisted laser desorption ionization (MALDI), it was possible to detect caffeine after spiking with amounts as low as 1 ng. MALDI detection of condom lubricants and detection of antibacterial peptides from an antiseptic cream was demonstrated. Detection of explosives from fingermarks left on plastic surfaces as well as from direct deposition on the same surface using gas chromatography mass spectrometry (GC-MS) was shown. Graphical Abstract ᅟ.

Analytical Validation of a Portable Mass Spectrometer Featuring Interchangeable, Ambient Ionization Sources for High Throughput Forensic Evidence Screening

Forensic evidentiary backlogs are indicative of the growing need for cost-effective, high-throughput instrumental methods. One such emerging technology that shows high promise in meeting this demand while also allowing on-site forensic investigation is portable mass spectrometric (MS) instrumentation, particularly that which enables the coupling to ambient ionization techniques. While the benefits of rapid, on-site screening of contraband can be anticipated, the inherent legal implications of field-collected data necessitates that the analytical performance of technology employed be commensurate with accepted techniques. To this end, comprehensive analytical validation studies are required before broad incorporation by forensic practitioners can be considered, and are the focus of this work. Pertinent performance characteristics such as throughput, selectivity, accuracy/precision, method robustness, and ruggedness have been investigated. Reliability in the form of false positive/negative response rates is also assessed, examining the effect of variables such as user training and experience level. To provide flexibility toward broad chemical evidence analysis, a suite of rapidly-interchangeable ion sources has been developed and characterized through the analysis of common illicit chemicals and emerging threats like substituted phenethylamines. Graphical Abstract ᅟ.

Internal Energy Deposition in Dielectric Barrier Discharge Ionization is Significantly Lower than in Direct Analysis in Real-Time Mass Spectrometry

The extent of internal energy deposition using three different plasma-based ionization mass spectrometry (MS) methods, atmospheric pressure chemical ionization (APCI), direct analysis in real time (DART), and active capillary dielectric barrier discharge ionization (DBDI), was investigated using benzylammonium ‘thermometer’ ions. Ions formed by DBDI were activated significantly less than those that were formed by DART and APCI under these conditions. Thermal ion activation by DART can be reduced slightly by positioning the DART source further from the capillary entrance to the MS and reducing the heat that is applied to metastable atoms exiting the DART source. For example, the average ion internal energy distribution decreased by less than 10 % (166.9 ± 0.3 to 152.2 ± 1.0 kJ mol−1) when the distance between the DART source and the MS was increased by 250 % (10 to 25 mm). By lowering the DART temperature from 350 to 150°C, the internal energy distributions of the thermometer ions decreased by ~15 % (169.93 ± 0.83 to 150.21 ± 0.52 kJ mol−1). Positioning the DART source nozzle more than 25 mm from the entrance to the MS and decreasing the DART temperature further resulted in a significant decrease in ion signal. Thus, varying the major DART ion source parameters had minimal impact on the ‘softness’ of the DART ion source under these conditions. Overall, these data indicate that DBDI can be a significantly ‘softer’ ion source than two of the most widely used plasma-based ion sources that are commercially available.

Towards on-site analysis of complex matrices by solid-phase microextraction-transmission mode coupled to a portable mass spectrometer via direct analysis in real time

On-site analysis of complex matrices by SPME-TM coupled to a portable mass spectrometer via DART.