Application of dispersive liquid–liquid microextraction and CE with UV detection for the chiral separation and determination of the multiple illicit drugs on forensic samples

Liquid-Phase Microextraction Approaches for Preconcentration and Analysis of Chiral Compounds: A Review on Current Advances

Chirality is a critical issue in pharmaceutics, forensic chemistry, therapeutic drug monitoring, doping control, toxicology, or environmental investigations as enantiomers of a chiral compound can exhibit different activities, i.e., one enantiomer can have the desired effect while the other one can be inactive or even toxic. To monitor enantioselective metabolism or toxicokinetic/toxicodynamic mechanisms in extremely low content in biological or environmental matrices, sample preparation is vital. The present review describes current status of development of liquid-phase microextraction approaches such as hollow fiber liquid-phase microextraction (HF-LPME), electromembrane extraction (EME), dispersive liquid-liquid microextraction (DLLME), and supramolecular solvent-based microextraction (SSME), used for sample preparation of enantiomers/chiral compounds. The advantages and limitations of the above techniques are discussed. Attention is also focused on chiral separation approaches commonly applied to study the stereo-selective metabolism or toxicokinetic/toxicodynamic mechanisms of enantiomers in the biological and environmental samples.

Dispersive liquid-liquid microextraction of 11-nor-Δ9-tetrahydrocannabinol-carboxylic acid applied to urine testing

Aim: THC-COOH is the major metabolite of Δ⁹-tetrahydrocannabinol commonly tested in urine to determine cannabis intake. In this study, a method based on dispersive liquid-liquid microextraction was developed for testing THC-COOH in urine. Materials & methods: Hydrolyzed urine specimens were extracted via dispersive liquid-liquid microextraction with acetonitrile (disperser solvent) and chloroform (extraction solvent). Derivatization was performed with N,O-Bis(trimethylsilyl)trifluoroacetamide with 1% trichloro(chloromethyl)silane. Analysis was performed by GC-MS/MS. Results: The method showed acceptable linearity (5-500 ng/ml), imprecision (<10.5%) and bias (<4.9%). Limits of detection and quantitation were 1 and 5 ng/ml, respectively. Twenty-four authentic samples were analyzed, with 22 samples being positive for THC-COOH. Conclusion: The proposed method is more environmentally friendly and provided good sensitivity, selectivity and reproducibility.

Sample preparation and instrumental methods for illicit drugs in environmental and biological samples: A review

Detection of illicit drugs in the environmental samples has been challenged as the consumption increases globally. Current review examines the recent developments and applications of sample preparation techniques for illicit drugs in solid, liquid, and gas samples. For solid samples, traditional sample preparation methods such as liquid-phase extraction, solid-phase extraction, and the ones with external energy including microwave-assisted, ultrasonic-assisted, and pressurized liquid extraction were commonly used. The sample preparation methods mainly applied for liquid samples were microextraction techniques including solid-phase microextraction, microextraction by packed sorbent, dispersive solid-phase extraction, dispersive liquid-liquid microextraction, hollow fiber-based liquid-phase microextraction, and so on. Capillary microextraction of volatiles and airborne particulate sampling were primarily utilized to extract illicit drugs from gas samples. Besides, the paper introduced recently developed instrumental techniques applied to detect illicit drugs. Liquid chromatograph mass spectrometry and gas chromatograph mass spectrometry were the most widely used methods for illicit drugs samples. In addition, the development of ambient mass spectrometry techniques, such as desorption electrospray ionization mass spectrometry and paper spray mass spectrometry, created potential for rapid in-situ analysis.

Recent Progresses in Sensitive Determination of Drugs of Abuse by Capillary Electrophoresis

Background:

Today, “drugs of abuse” pose serious social problems such as many crimes, medical treatment costs, and economic repercussions. Several worldwide clinical laboratories use analytical separation methods to analyze their patient samples for drugs and poisons. In this way, they provide qualitative and quantitative data on the substances in various biological matrices (e.g., urine, plasma or serum, saliva, and breath).

Methods:

An extensive review of the published articles indicates that the use of Capillary Electrophoresis (CE) coupled with sensitivity enhancing methods is a very attractive area of interest in the assay of drugs of abuse.

Results:

This review was prepared to have a comprehensive study on applications of sensitivity enhancing methods on the determination of drugs of abuse especially from 2007 to present. The sample preconcentration approaches almost address all methods from online preconcentration (both electrophoretic and chromatographic-based methods) to offline preconcentration. Furthermore, detection system modification and capillary column fabrications were investigated in order to increase the detection sensitivity of complex samples in CE.

Conclusion:

The present review summarizes the most recent developments in the detection of drugs of abuse using CE. Although CE still has a limitation in sensitive detection, several publications in recent years have proposed valuable methods to overcome this problem.

Enantiomeric Determination of Drugs in Pharmaceutical Formulations and Biological Samples by Electrokinetic Chromatography

Chirality is a relevant issue in the pharmaceutical field due to the different biological activity that enantiomers of a chiral drug can show. In fact, the desired biological or pharmaceutical activity might be present in only one of the enantiomers, while the other enantiomer(s) may have different biological activity, be inactive or even toxic. This has motivated in recent years the development of drugs marketed as pure enantiomers to avoid exposing the organism to the action of enantiomers that may not be active or even harmful to health. Thus, it is of high interest to develop enantioselective analytical methodologies to control the presence of enantiomeric impurities and to understand the enantioselective metabolism of chiral drugs. This review gives an overview about the analytical strategies developed by electrokinetic chromatography (EKC) from 2010 to June 2019 for the enantiomeric determination of drugs in both pharmaceutical formulations and biological samples. The types of chiral selectors used, the migration order of enantiomers, their resolution, the detection technique employed and the sensitivity achieved are revised and compared. Also, applications to assess the enantiomeric purity control of pharmaceutical formulations and to determine chiral drugs in biological samples to study their metabolism are included. Advantages and limitations of the chiral methods developed by EKC are also discussed.

Chiral Drug Analysis in Forensic Chemistry: An Overview

Many substances of forensic interest are chiral and available either as racemates or pure enantiomers. Application of chiral analysis in biological samples can be useful for the determination of legal or illicit drugs consumption or interpretation of unexpected toxicological effects. Chiral substances can also be found in environmental samples and revealed to be useful for determination of community drug usage (sewage epidemiology), identification of illicit drug manufacturing locations, illegal discharge of sewage and in environmental risk assessment. Thus, the purpose of this paper is to provide an overview of the application of chiral analysis in biological and environmental samples and their relevance in the forensic field. Most frequently analytical methods used to quantify the enantiomers are liquid and gas chromatography using both indirect, with enantiomerically pure derivatizing reagents, and direct methods recurring to chiral stationary phases.

Application of hollow fiber liquid phase microextraction and dispersive liquid–liquid microextraction techniques in analytical toxicology

The recent developments in hollow fiber liquid phase microextraction and dispersive liquid –liquid microextraction are reviewed. Applications of these newly emerging developments in extraction and preconcentration of a vast category of compounds including heavy metals, pesticides, pharmaceuticals and abused drugs in complex matrices (environmental and biological matrices) are reviewed and discussed. The new developments in these techniques including the use of solvents lighter than water, ionic liquids and supramolecular solvents are also considered. Applications of these new solvents reduce the use of toxic solvents and eliminate the centrifugation step, which reduces the extraction time.

A dispersive liquid-liquid microextraction and chiral separation of carvedilol in human plasma using capillary electrophoresis

BACKGROUND

Development of simple, rapid and precise analysis of chiral drugs in biological samples is an important issue. Dispersive liquid-liquid microextraction in combination with CE using field amplified sample injection has been of interest because of its capability to analyze trace amount of drugs.

METHODS

Dispersive liquid-liquid microextraction-CE-field amplified sample injection was employed for chiral separation of carvedilol in human plasma using UV-DAD detector and the developed method has been validated according to US FDA method validation guideline for bioanalysis.

RESULTS

The method was linear over a concentration range of 12.5-100 ng/ml for each carvedilol enantiomer (R(2) = 0.998) and the mean recoveries ranged from 91 to 107%.

CONCLUSION

The method was adapted for sensitive, selective and rapid determination of carvedilol enantiomers in human plasma samples.

Electromigrative separation techniques in forensic science: combining selectivity, sensitivity, and robustness

In this review we introduce the advantages and limitations of electromigrative separation techniques in forensic toxicology. We thus present a summary of illustrative studies and our own experience in the field together with established methods from the German Federal Criminal Police Office rather than a complete survey. We focus on the analytical aspects of analytes' physicochemical characteristics (e.g. polarity, stereoisomers) and analytical challenges including matrix tolerance, separation from compounds present in large excess, sample volumes, and orthogonality. For these aspects we want to reveal the specific advantages over more traditional methods. Both detailed studies and profiling and screening studies are taken into account. Care was taken to nearly exclusively document well-validated methods outstanding for the analytical challenge discussed. Special attention was paid to aspects exclusive to electromigrative separation techniques, including the use of the mobility axis, the potential for on-site instrumentation, and the capillary format for immunoassays. The review concludes with an introductory guide to method development for different separation modes, presenting typical buffer systems as starting points for different analyte classes. The objective of this review is to provide an orientation for users in separation science considering using capillary electrophoresis in their laboratory in the future.

Rapid extraction and determination of amphetamines in human urine samples using dispersive liquid-liquid microextraction and solidification of floating organic drop followed by high performance liquid chromatography

A novel, rapid, simple and sensitive dispersive liquid-liquid microextraction method based on the solidification of floating organic drop (DLLME-SFO) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was used to determine amphetamine and methamphetamine in urine samples. The factors affecting the extraction efficiency of DLLME-SFO such as the kind and volume of the extraction and the disperser solvents, effect of concentration of K2CO3 and extraction time were investigated and the optimal extraction conditions were established. Under the optimum conditions (extraction solvent: 30.0μl 1-undecanol; disperser solvent: 300μl acetonitrile; buffer concentration: 2% (w/v) K2CO3 and extraction time: 1min), calibration curves are linear in the range of 10-3000μgl(-1) and limit of detections (LODs) are in the range of 2-8μgl(-1). The relative standard deviations (RSDs) for 100μgl(-1) of amphetamine and methamphetamine in diluted urine are in the range of 6.2-7.8% (n=7). The method was successfully applied for the determination of amphetamine and methamphetamine in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 87.8-113.2%. The obtained results show that DLLME-SFO combined with HPLC-UV is a fast and simple method for the determination of amphetamine and methamphetamine in urine.

Electroenhanced solid-phase microextraction of methamphetamine with commercial fibers

Electroenhanced solid-phase microextraction (EE-SPME) method with gas chromatographic mass spectrometric analysis was investigated for the determination of methamphetamine in urine sample with commercial fibers. In this approach, commercial SPME fibers were used in direct immersion mode with an applied potential to extract methamphetamine. EE-SPME was more effective in the extraction compared to conventional SPME (i.e. application of potential). The method was simple to use, and avoided the need for alkalization and derivatization of methamphetamine. Experimental conditions were optimized to achieve better extraction performance. Various conditions including applied potential, sample pH, extraction and desorption time were investigated. Based on the optimized conditions, EE-SPME achieved a higher enrichment factor of 159-fold than conventional SPME. The calibration plot under the best selected parameters was linear in the range of 0.5-15ng/mL (r=0.9948). The feasibility of EE-SPME was demonstrated by applying it to the analysis of human urine samples. The limit of detection of methamphetamine was 0.25ng/mL with a satisfactory relative standard deviation of 6.12% (n=3) in human urine.

Dispersive liquid-liquid microextraction prior to field-amplified sample injection for the sensitive analysis of 3,4-methylenedioxymethamphetamine, phencyclidine and lysergic acid diethylamide by capillary electrophoresis in human urine

A novel capillary zone electrophoresis (CZE) with ultraviolet detection method has been developed and validated for the analysis of 3,4-methylenedioxymethamphetamine (MDMA), lysergic acid diethylamide (LSD) and phencyclidine (PCP) in human urine. The separation of these three analytes has been achieved in less than 8 min in a 72-cm effective length capillary with 50-μm internal diameter. 100 mM NaH(2)PO(4)/Na(2)HPO(4), pH 6.0 has been employed as running buffer, and the separation has been carried out at temperature and voltage of 20°C, and 25kV, respectively. The three drugs have been detected at 205 nm. Field amplified sample injection (FASI) has been employed for on-line sample preconcentration. FASI basically consists in a mismatch between the electric conductivity of the sample and that of the running buffer and it is achieved by electrokinetically injecting the sample diluted in a solvent of lower conductivity than that of the carrier electrolyte. Ultrapure water resulted to be the better sample solvent to reach the greatest enhancement factor. Injection voltage and time have been optimized to 5 kV and 20s, respectively. The irreproducibility associated to electrokinetic injection has been correcting by using tetracaine as internal standard. Dispersive liquid-liquid microextraction (DLLME) has been employed as sample treatment using experimental design and response surface methodology for the optimization of critical variables. Linear responses were found for MDMA, PCP and LSD in presence of urine matrix between 10.0 and 100 ng/mL approximately, and LODs of 1.00, 4.50, and 4.40 ng/mL were calculated for MDMA, PCP and LSD, respectively. The method has been successfully applied to the analysis of the three drugs of interest in human urine with satisfactory recovery percentages.

Recent advances in enrichment techniques for trace analysis in capillary electrophoresis

CE is gaining great popularity as a well-established separation technique for many fields such as pharmaceutical research, clinical application, environmental monitoring, and food analysis, owing to its high resolving power, rapidity, and small amount of samples and reagents required. However, the sensitivity in CE analysis is still considered as being inferior to that in HPLC analysis. Diverse enrichment methods and techniques have been increasingly developed for overcoming this issue. In this review, we summarize the recent advances in enrichment techniques containing off-line preconcentration (sample preparation) and on-line concentration (sample stacking) to enhancing sensitivity in CE for trace analysis over the last 5 years. Some relatively new cleanup and preconcentration methods involving the use of dispersive liquid-liquid microextraction, supercritical fluid extraction, matrix solid-phase dispersion, etc., and the continued use and improvement of conventional SPE, have been comprehensively reviewed and proved effective preconcentration alternatives for liquid, semisolid, and solid samples. As for CE on-line stacking, we give an overview of field amplication, sweeping, pH regulation, and transient isotachophoresis, and the coupling of multiple modes. Moreover, some limitations and comparisons related to such methods/techniques are also discussed. Finally, the combined use of various enrichment techniques and some significant attempts are proposed to further promote analytical merits in CE.

Dispersive liquid-liquid microextraction combined with capillary electrophoresis and time-of-flight mass spectrometry for urine analysis

The combination of dispersive liquid-liquid microextraction (DLLME) with capillary electrophoresis (CE) and a time-of-flight mass spectrometer (TOF-MS) was evaluated for the toxicological screening in urine samples. A methodology based on design of experiments (DOE) was implemented to increase the extraction efficiency. Dichloromethane and isopropanol were selected as the extraction and dispersing solvents, respectively. Seven factors for DLLME were screened with the help of a Plackett-Burmann DOE using two model compounds before fine investigation of the important parameters to maximise the compound extraction. These experiments were performed in the CE-UV configuration to overcome potential MS matrix effects. The performance of the entire procedure was then evaluated using CE-ESI-TOF-MS. With a preconcentration factor of more than 130, the highly sensitive DLLME-CE-ESI-TOF-MS method allowed for the detection of 30 toxicological compounds (i.e., amphetamines and their derivatives, opiates, cocaine and its metabolites and pharmaceuticals) in urine with limits of detection in the sub-ng/mL level and was used to analyse real toxicological samples. The combination of DLLME and CE was particularly attractive because of the small amount of organic solvents required.