Adsorption and desorption of nutrients from abattoir wastewater: modelling and comparison of rice, coconut and coffee husk biochar

Biochar-enhanced bioremediation of eutrophic waters impacted by algal blooms

The permanent problem of formation of algal blooms in water polluted with nitrogen and phosphorus is one of the formidable environmental problems. Biochar has the potential to solve the issues related to eutrophication due to its special structure and ability to absorb the nutrients. Biochar's exceptional nutrient absorption capacity allows it to absorb excess nutrients, causing the algae to use fewer nutrients. This review deals with effective performance of biochar in reducing the effects caused by algal blooms and improving the environmental conditions. Besides, an analysis of the issues involved addresses the origins and consequences of nitrogen and phosphorus pollution, and the formation of algal blooms is also reviewed. It then delves deeply into biochar, explaining its properties, production methods, and their uses in environmental contexts. The review emphasizes that biochar can be effective in dealing with many challenges associated with environments affected by algal blooms, specifically focusing on the positive effects of biochar and algae to examine their roles in controlling algae growth. Finally, the review emphasizes new achievements and innovative ideas to foster sustainable aquatic ecosystems. The discussions emphasize the central role of biochar in managing nutrient-rich waters and algal blooms.

Efficient Adsorption of Nitrogen and Phosphorus in Wastewater by Biochar

Nitrogen and phosphorus play essential roles in ecosystems and organisms. However, with the development of industry and agriculture in recent years, excessive N and P have flowed into water bodies, leading to eutrophication, algal proliferation, and red tides, which are harmful to aquatic organisms. Biochar has a high specific surface area, abundant functional groups, and porous structure, which can effectively adsorb nitrogen and phosphorus in water, thus reducing environmental pollution, achieving the reusability of elements. This article provides an overview of the preparation of biochar, modification methods of biochar, advancements in the adsorption of nitrogen and phosphorus by biochar, factors influencing the adsorption of nitrogen and phosphorus in water by biochar, as well as reusability and adsorption mechanisms. Furthermore, the difficulties encountered and future research directions regarding the adsorption of nitrogen and phosphorus by biochar were proposed, providing references for the future application of biochar in nitrogen and phosphorus adsorption.

Synthesis and application of lanthanum-doped magnetic biochar composite adsorbent for removal of fluoride from water

Fluoride levels greater than 1.5 mg/L in drinking water are a global environmental issue that can seriously harm the health of humans. One of the most effective techniques for defluoridating water is adsorption. The main drawbacks of many adsorbent materials include their poor adsorption capabilities, prolonged contact times, excessively low or high pH levels, and high dosages. The biochar-based magnetic nanocomposite adsorbent was synthesized in the current study and used as an adsorbent for water defluoridation. Through slow pyrolysis, coffee husk waste was converted to biochar. The composite was created by chemically co-precipitating iron and lanthanum oxide nanoparticles onto the surface of biochar. By using X-ray diffraction analysis (XRD), Fourier transform infrared spectrometry (FTIR), Brunauer-Emmett-Teller (BET), and pHPZC values, researchers were able to describe the magnetic biochar nanocomposite material. The Central Composite Design (CCD), which uses four input variables including dosage (2-5 g/L), solution pH (4-8), contact time (30-70 min), and initial concentration (10-20 mg/L), was used to design the experiments. The quadratic model indicated that the ideal conditions for removing 98.994% of the fluoride from water (adsorbent dosage of 5 g L-1, pH 5.74, contact period of 60 min, and initial concentration of 12.245 mg/L) would be attained. The average triplicate value in ideal circumstances produced a removal effectiveness of 98.51%, demonstrating the proposed response surface's capacity for prediction. The findings of this investigation showed that the magnetic biochar nanocomposite that was created is an effective fluoride adsorbent.

Pyrolytic biochar from plastic film waste addition on farmland for maize growth improvement: Process and effect study

Pyrolyzing and returning to farmland is one of the potential methods for farmland plastic film waste. This study explored both pyrolyzation and activation optimum conditions of a mixture of plastic film (polyethylene) and maize straw (MPS) in a 1:5 ratio to produce MPS-char, investigated the action of the char on the maize seedling stage (for 30 days). The results showed that the char promoted the root to be more advanced than aboveground part, therefore, this study experimentally clarified the role MPS-char played when added to the soil. The functional groups of the char were varied by the participation of polyethylene. Carbon-based groups were observed, such as carbonyl or carboxyl groups, which could constitute an NH₄⁺ absorption release system to increase the existence of urea in soil, therefore the average nitrogen concentration was improved by 16.18 %. However, the shallow soil temperature increased by 2.03 °C, and the deep soil temperature slightly decreased with the effect of MPS-char. While, the soil moisture content was slightly reduced in the second half of the experiment, and the soil oxygen content increased by 7.64 % throughout the whole experiment. Overall, returning MPS-char to farmland showed a positive effect on maize growth, which was caused by the variation of both chemical and physical properties. This variation provides opportunities for further promotion of rhizosphere development.

Agro-Industrial Wastewaters for Algal Biomass Production, Bio-Based Products, and Biofuels in a Circular Bioeconomy

Recycling bioresources is the only way to sustainably meet a growing world population’s food and energy needs. One of the ways to do so is by using agro-industry wastewater to cultivate microalgae. While the industrial production of microalgae requires large volumes of water, existing agro-industry processes generate large volumes of wastewater with eutrophicating nutrients and organic carbon that must be removed before recycling the water back into the environment. Coupling these two processes can benefit the flourishing microalgal industry, which requires water, and the agro-industry, which could gain extra revenue by converting a waste stream into a bioproduct. Microalgal biomass can be used to produce energy, nutritional biomass, and specialty products. However, there are challenges to establishing stable and circular processes, from microalgae selection and adaptation to pretreating and reclaiming energy from residues. This review discusses the potential of agro-industry residues for microalgal production, with a particular interest in the composition and the use of important primary (raw) and secondary (digestate) effluents generated in large volumes: sugarcane vinasse, palm oil mill effluent, cassava processing waster, abattoir wastewater, dairy processing wastewater, and aquaculture wastewater. It also overviews recent examples of microalgae production in residues and aspects of process integration and possible products, avoiding xenobiotics and heavy metal recycling. As virtually all agro-industries have boilers emitting CO2 that microalgae can use, and many industries could benefit from anaerobic digestion to reclaim energy from the effluents before microalgal cultivation, the use of gaseous effluents is also discussed in the text.

Chestnut Shell-Activated Carbon Mixed with Pyrolytic Snail Shells for Methylene Blue Adsorption

Activated carbon has been used to treat organic dyes in water systems; however, the adsorption capacity of the samples studied was limited by the specific surface area and influenced by the pH of the aqueous solution. In this study, a hybrid adsorbent consisting of a mixture (MCS) of activated chestnut shell biochar (CN) and pyrolyzed snail shell material (SS) was developed to solve this problem, with the waste snail shell samples being processed by pyrolysis and the chestnut shell samples chemically pretreated and then pyrolyzed. The BET and SEM results revealed that the SS had a mesoporous fluffy structure with a higher specific surface (1705 m²/g) and an average pore diameter of about 4.07 nm, providing a large number of sites for adsorption. In addition, XPS and FTIR results showed that the main component of SS was calcium oxide, and it also contained a certain amount of calcium carbonate, which not only provided an alkaline environment for the adsorption of biochar but also degradation and photocatalytic capabilities. The results showed that the MCS3-1 sample, obtained when CN and SS were mixed in the ratio of 3:1, had good capacity for adsorption for methylene blue (MB), with 1145 mg/g at an initial concentration of 1300 mg/L (92% removal rate). The adsorption behaviors were fitted with the pseudo-second-order kinetic model and Freundlich isotherm model, which indicated that the adsorption was multilayer chemisorption with a saturated adsorption capacity of 1635 mg/g. The photocatalytic capacity from the SS composition was about 89 mg/g, and the sorption of MB dye onto the sorbent reached equilibrium after 300 min. The results suggested that MCS3-1 has enormous potential for removing MB from wastewater.

Coffee Husk and Lignin Revalorization: Modification with Ag Nanoparticles for Heavy Metals Removal and Antifungal Assays

This study presents the use of the modified coffee husk and coffee lignin as sorbents in the heavy metal ions sorption of Pb(II), Cd(II), Cr(III), and Cu(II) in an aqueous solution. The modification of sorbents was carried out by the impregnation method, using silver nitrate (AgNO3) and sodium borohydride (NaBH4) as a nanoparticles’ (NPs) precursor, and reducing agent, respectively. The obtained nanocomposite material was morphologically characterized by electron microscopy. In addition, an evaluation of metal ions’ sorption, pseudo-first-order, and pseudo-second-order kinetics modeling was performed. Finally, antifungal activity was evaluated on different Candida species. Coffee and lignin modified with AgNPs increased the extraction capacity with the highest sorption for Pb ions with 2.56 mg/g and 1.44 mg/g, respectively.