Fourier transform infrared spectroscopy as a tool for identifying the unique characteristic bands of lipid in oilseed components: Confirmed via Ethiopian indigenous desert date fruit

Optimizing Desmostachya bipinnata-derived platinum nanoparticles for enhanced antibacterial and biofilm reduction

This study presents the green synthesis and comprehensive characterization of platinum nanoparticles (PtNPs) using Desmostachya bipinnata (Db) extract, incorporated into two innovative mouthwash formulations (MW1 and MW2). UV-Vis spectroscopy confirmed the successful synthesis of PtNPs, with distinct absorption peaks between 250 and 600 nm. Fourier-transform infrared (FTIR) spectroscopy identified hydroxyl and carbonyl functional groups, critical for the bioreduction and stabilization of PtNPs. High-resolution transmission electron microscopy (HR-TEM) revealed uniformly dispersed, spherical nanoparticles with a size range of 10-20 nm, while dynamic light scattering (DLS) confirmed a hydrodynamic diameter of 10-30 nm and a low polydispersity index (PDI) of 0.238, indicating excellent stability. Both formulations exhibited robust antimicrobial, antibiofilm, and anti-plaque properties, with MW2 showing superior efficacy, particularly against Staphylococcus aureus and Escherichia coli, as well as a notable 70 % reduction in biofilm formation and a 60 % plaque reduction within 2 h of treatment. The study underscores the potential of Desmostachya bipinnata-derived PtNPs as a promising alternative to conventional mouthwash, offering enhanced antimicrobial efficacy, biofilm disruption, and plaque prevention, alongside excellent stability and biocompatibility for oral healthcare applications.

Valorization of Date By-Products: Enhancement of Antioxidant and Antimicrobial Potentials through Fermentation

The by-products from three varieties of dates-Mozafati, Sayer, and Kabkab-were subjected to solid-state fermentation using Aspergillus niger alone or in co-culture with Lactiplantibacillus plantarum or Limosilactobacillus reuteri to enhance their phenolic and flavonoid content, along with antioxidant and antimicrobial activities. Solid-state fermentation, being environmentally friendly and cost-effective, is particularly suitable for agricultural residues. Significant increases (p < 0.05) in total polyphenol content (TPC), total flavonoid content (TFC), and antioxidant power were observed post-fermentation, especially under co-culture conditions. The highest TPC (12.98 ± 0.29 mg GA/g) and TFC (1.83 ± 0.07 mg QE/g) were recorded in the co-culture fermentation of by-products from the Mozafati and Sayer varieties, respectively. HPLC analysis revealed changes in polyphenol profiles post-fermentation, with reductions in gallic and ferulic acids and increases in caffeic acid, p-coumaric acid, rutin, quercetin, and kaempferol. FT-IR analysis confirmed significant alterations in polyphenolic functional groups. Enhanced antimicrobial activity was also observed, with inhibition zones ranging from 8.26 ± 0.06 mm for Kabkab to 17.73 ± 0.09 mm for Mozafati. These results suggest that co-culture solid-state fermentation is a promising strategy for valorizing date by-products, with potential applications in nutraceuticals and/or pharmaceutical products and as valuable additives in the food industry.

Investigation of bioactive phytochemical compounds of the Ethiopian medicinal plant using GC-MS and FTIR

Medicinal plants Highly aromatic crude materials are utilized for treating warts as an alternative medicine to surgical treatment because they can be permanently removed from the body. Thus, this investigation aimed to extract plant material from Calotropis procera leaves, describe the phytochemical screening, analyze anti-microbial activities, determine the functional groups in FTIR, and identify the chemical compounds in GC-MS. The PH, specific gravity, and viscosity of the crude extracts of Calotropis procera were determined at 4.5, 0.79, and 0.49, respectively. Analyze the solubility of crude extracts; ethanol can dissolve while water does not. Flavonoids, alkaloids, phenols, tannins, and saponins were also present in the phytochemical screening tests of the Calotropis procera extracts, triterpenoids, terpenoids, and steroids were not present in the crude extract. Flavonoids, alkaloids, phenols, tannins, and saponins are the primary phytochemical components found in therapeutic plant material. The Calotropis procera crude extracts analyzed for functional groups by FT-IR contained a hydroxyl group, alkane, carbonyl, aldehyde, ketone, phenols, ester, alcohol, and methylene. The chemical compounds analyzed by GC-MS of Calotropis procera crude material were found to have 22 main compounds. Of 22 compounds, 5 compounds are active ingredients for the applications of medical purposes. The bioactive compounds found in the Calotropis procera plant extract are neophytadiene, hexahydrofarnesyl, lanosterol, 2,4-dimethylbenzo [H]quinolone, and squalene. Those bioactive compounds have anti-bacterial, analgesic, antipyretic, anti-inflammatory, antimicrobial, antioxidant, antiviral, and anti-cancer properties. In an in vitro antimicrobial activity test, the crude extract effectively inhibited more gram-positive bacteria than gram-negative bacteria. This collective reason is why the traditional therapist uses this Calotropis procera plant for the treatment of warts.

Alternative Methods for Biodiesel Cetane Number Valuation: A Technical Note

Biodiesel is an environmentally beneficial and clean energy source that may replace fossil fuels, which are detrimental to the environment and cannot be replenished. Therefore, the physicochemical parameters of biodiesel must be determined in order to verify its quality. The cetane number is a crucial dimensionless fuel property that gauges the fuel ignition quality in power diesel engines. A higher cetane number results in a shorter ignition delay time, and vice versa. Biodiesel's cetane number may fluctuate due to a variety of fatty acid compositions, including variations in carbon chain length and the degree of unsaturation. The cetane number generally increases with increasing saturation and chain length, while it decreases as chain length is reduced and degrees of unsaturation and branching increase. This is the main reason for why alkanes possess a higher cetane number than alkenes and aromatics. The standard protocols for evaluating the cetane number of biodiesel are ASTM D613 and ISO 5165 test techniques using a monocylindrical cetane engine. However, adhering to these conventional procedures is quite challenging and time-consuming, and the cetane number test result may also be affected by the presence of certain gases and fumes. As a result, many researchers are bothered with cetane number valuation, and occasionally they skip it due to a lack of other options. Consequently, the aim of this paper is to present a set of more straightforward and relevant alternative techniques that can be applied to predict the cetane number of biodiesel when engine-based measurement is not practical. The three techniques with their designed pictographic outlooks conferred in this article include color indicator titration, aniline point, and fatty acid composition-based methods. The reported values of these procedures meet the minimum cut point of the biodiesel cetane number required by ASTM D6751 (≥47) and exhibit minimal variation from the typical standard methods. Nevertheless, the above-mentioned techniques are not applicable to other alternative biofuels except biodiesel products because they have a direct implication on the characteristics of the fatty acid profiles of different oil precursors, such as carbon chain length, degree of saturation or unsaturation, and aromaticity, which make up monoalkyl esters.

OH-Impregnated Household Bleach-Making Sediments for the Catalysis of Waste Cooking Oil Transesterification: Parameter Optimization

Industrial and academic societies have been bothered with the generation and subsequent management of residues settled out from household bleach, due to its corrosive properties. Therefore, the aim of this research was to introduce a NaOH-impregnated calcium-based solid catalyst from the aforementioned sediments for waste cooking oil transesterification. To prepare the catalyst (RC-ITB), the wet impregnation technique was followed and successfully characterized via X-ray diffraction (XRD), X-ray fluorescence(XRF), differential scanning calorimetry (DSC), Brunauer-Emmett-Teller (BET), Fourier transform infrared (FT-IR), and scanning electron microscopy (SEM) methods. The study findings suggested that RC-ITB has a BET surface area of 9.312 m2 g-1 and is largely made up of calcium with its compound forms such as carbonates, hydroxides, and oxides. The evaluation of pH values verified that RC-ITB is more alkaline (i.e., pH = 12.65) relative to its precursor RC (pH = 10.66), largely attributable to OH impregnation. To study the catalytic performance, three numeric factors with three levels of treatment were used, and their influences were analyzed through a response surface approach. Accordingly, the optimal yield of biodiesel was found to be 80.04% at a reaction temperature of 61 ± 2 °C, catalyst weight of 6.33 wt %, and a molar ratio of 23.94. Moreover, FTIR analysis verified that the glycerol part of triglycerides had been replaced with a methoxyl unit. Also, the fuel quality parameters of the FAME product were examined, including density, kinematic viscosity, acid value, density, cetane number, cloud point, saponification value, and pour point; all of these values fall within the ASTM D6751-accepted limits. Thus, the findings showed that the sediments of household bleach production could be a candidate source to explore heterogeneous basic catalysts.

Valorization of calcium hypochlorite precipitate as a new source of heterogeneous catalyst development for biodiesel production: A preliminary experiment

One of the main problem related with liquid bleach production from calcium hypochlorite is the amount of precipitates generated and its consequent management. As a result, academic and industrial communities have been challenged with searching of a means for its valorization. Therefore, this research explores the application of the precipitate as a viable source of Ca-based heterogeneous catalyst development for the production of waste cooking oil methyl esters for the first-time. The catalyst was prepared by dividing the precipitates into three forms, viz. raw untreated (RC), heat treated (RC-TB), and NaOH impregnated plus thermally activated (RC-ITB). The prepared catalysts were efficiently characterized by XRF, XRD, FTIR, SEM, and BET techniques. The characterization results indicated that the catalysts are mainly composed of calcium metal in the form of oxides (CaO), calcite (CaCO3) and Portlandite (Ca(OH)2), which are the promising constituents of basic catalysts. The BET inspection of RC, RC-TB, and RC-ITB revealed the specific surface area of 8.509, 9.089, and 9.312 m2/g, respectively. At the same reaction conditions, the maximum biodiesel yield of 76.05 % was achieved by RC-ITB compared to RC-TB (62.57 %) and RC (19.74 %), because it's larger specific surface area and highest basic nature (pH = 12.65 at 1:5 w/v) improves the reaction catalysis through better catalyst-substrates interactions. The lower biodiesel yield was attained through the RC catalyst due to its untreated surface, lower specific area, and weak alkaline nature (pH value = 10.66 at 1:5 w/v). Furthermore, regardless of the amount of yield, almost similar fuel properties and functional groups of the products over the coded catalysts were observed. Generally, the possibility of calcium hypochlorite precipitate as a precursor of Ca-based heterogeneous catalyst has been effectively proven in this research, which could be very important for environmental safety and industrial resource integration.