A review on contemporary Metal–Organic Framework materials

Synthesis of UiO-66-Pyca-CuO by a Simple and Novel Method: MOF-based Metal Thin Film as Heterogeneous Catalysts for the Synthesis of α-Aminonitriles

Metal-organic frameworks (MOFs), particularly UiO-66-NH2, are employed as catalysts in many industrial catalyst applications. As converting catalysts into thin film significantly increases their catalytic properties, we report a general approach to synthesizing MOF thin films (UiO-66-Pyca-CuO). First, functionalization of UiO-66-NH2 was done with 3-pyridine carboxaldehyde by the postsynthesis method, and then, UiO-66-Pyca was entangled on the surface of copper oxide nanoparticles with a modern strategy (MOF thin film). The morphology and structure of the synthesized UiO-66-Pyca-CuO were determined by using X-ray diffraction, Fourier transform infrared, field-emission scanning electron microscopy, energy-dispersive analysis of X-ray, inductively coupled plasma-mass spectrometry, elemental analyses of CHNOS, temperature-programmed desorption of ammonia, Brunauer-Emmett-Teller, and X-ray photoelectron spectroscopy. We studied the catalytic action of the UiO-66-Pyca-CuO thin film in the synthesis of α-aminonitriles via Strecker reaction. Our studies show that this catalysis can be a suitable catalyst in the synthesis of α-aminonitriles because of having advantages such as using the solvent being environmentally friendly, easy separation of the catalyst (only by picking up the MOF thin film from inside the solution), the reaction at room temperature, high yield, and reusability.

Defect-engineered chiral metal-organic frameworks

Chirality has an important impact on chemical and biological research, as most active substances are chiral. In recent decades, metal-organic frameworks (MOFs), which are assembled from metal ions or clusters and organic linkers via metal-ligand bonding, have attracted considerable scientific interest due to their high crystallinity, exceptional porosity and tunable pore sizes, high modularity, and diverse functionalities. Since the discovery of the first functional chiral metal-organic frameworks (CMOFs), CMOFs have been involved in a variety of disciplines such as chemistry, physics, optics, medicine, and pharmacology. The introduction of defect engineering theory into CMOFs allows the construction of a class of defective CMOFs with high hydrothermal stability and multi-stage pore structure. The introduction of defects not only increases the active sites but also enlarges the pore sizes of the materials, which improves chiral recognition, separation, and catalytic reactions, and has been widely investigated in various fields. This review describes the design and synthesis of various defective CMOFs, their characterization, and applications. Finally, the development of the materials is summarized, and an outlook is given. This review should provide researchers with an insight into the design and study of complex defective CMOFs.

Crystal Clear: Metal-Organic Frameworks Pioneering the Path to Future Drug Detox

The growing number of acute drug abuse overdoses demands the development of innovative detoxification strategies for emergency purposes. In this study, an innovative approach for the application of porous Zr-based metal-organic frameworks for the treatment of acute overdoses of popular drugs of abuse including amphetamine, methamphetamine, cocaine, and MDMA is presented. A comprehensive approach determining the efficacy and the kinetics of drug removal, considering dosage, adsorption time, and adsorption mechanisms, was tested and corroborated with density functional theory (DFT) modeling. The experimental results showed high removal efficiency reaching up to 90% in the case of the application of the NU-1000 metal-organic framework. The difference Raman spectroscopy method presented in this study corroborated with DFT-based vibrational analysis allows the detection of drug adsorbed in the MOF framework even with as low a concentration as 5 mg/g. Additionally, the drug adsorption mechanisms were modeled with DFT, showing the π-π stacking in a vast majority of considered cases. The performance and influence on the living organisms were evaluated throughout the in vitro and in vivo experiments, indicating that Zr-based MOFs could serve as efficient, organic, safe drug adsorbents.

Metal organic framework anchored onto biowaste mediated carbon material (rGO) for remediation of chromium (VI) by the photocatalytic process

Groundwater contaminated with hexavalent chromium Cr(VI) causes serious health concerns for the ecosystem. In this study, a hybrid amino functionalized MOF@rGO nanocatalyst was produced by utilization of a biowaste mediated carbon material (reduced graphene oxide; rGO) and its surface was modified by in situ synthesis of a nanocrystalline, mixed ligand octahedral MOF containing iron metal and NH2 functional groups and the prepared composite was investigated for Cr (VI) removal. The photocatalytic degradation of Cr(VI) in aqueous solutions was carried out under UV irradiation. Using a batch mode system, the effect of numerous control variables was examined, and the process design and optimization were carried out by response surface methodology (RSM). The photocatalyst, NH2-MIL(53)-Fe@rGO, was intended to be a stable and highly effective nanocatalyst throughout the recycling tests. XRD, SEM, EDS, FTIR examinations were exploited to discover more about surface carbon embedded with MOF. 2 g/L of NH2-MIL-53(Fe)/rGO was utilized in degrading 200 mg/L of Cr(VI) in just 100 min, implying the selective efficacy of such a MOF-rGO nanocatalyst. Moreover, the Eg determinations well agreed with the predicted range of 2.7 eV, confirming its possibility to be exploited underneath visible light, via the Tauc plot. Thus, MOF anchored onto biowaste derived rGO photo-catalyst was successfully implemented in chromium degradation.

Chiral Metal-Organic Frameworks with Spectroscopic Methods: Towards Chemical Sensor Devices

Chiral Metal-Organic Frameworks (CMOFs) are a rapidly growing field reflecting their potential as selective and sensitive chemical sensors for chiral analytes. The highly tuneable nature of CMOFs enables the size, shape, and non-covalent interactions to be optimised towards specific analytes to engender strong intermolecular interactions and sensing responses. While CMOFs as chiral chemical sensor devices have been explored with electrochemical methods including differential pulse voltammetry (DPV), bipolar and chemiresistive sensing techniques, the CMOFs as chiral chemical sensors using spectroscopic methods has received significantly less attention. This review examines the synthesis of CMOFs for chemical sensors with spectroscopic methods such as photoluminescence, circular dichroism, and solid-state nuclear magnetic resonance with a view towards their incorporation into chemical sensor devices. Future directions of the field are highlighted for the generation of functional devices.

Assessing Early Atherosclerosis by Detecting and Imaging of Hypochlorous Acid and Phosphorylation Using Fluorescence Nanoprobe

The assessment of early atherosclerosis (AS) is of great significance for the early diagnosis and mechanism research. Herein, a novel nanoprobe PCN@FL is developed to realize the simultaneous detection and imaging of phosphorylation and hypochlorous acid (HClO). The selective recognition of HClO is achieved through the specific interaction between DMTC and HClO, while the levels of phosphorylation are detected via the specific interaction between Zr (IV) and phosphates. The nanoprobe can be utilized to monitor the fluctuations in HClO and phosphate in early atherosclerosis. It is observed that the levels of HClO and phosphate in the serum of early AS mice are higher than those of the normal mice. Ultimately, the levels of hypochlorous acid and phosphorylation in the inner wall of aortic vessels are imaged by two-photon microscope. The results show that the levels of HClO and phosphorylation in the early atherosclerotic mice are significantly higher than those of in normal mice. The nanoprobe provides a suitable fluorescent tool for simultaneous detection and imaging of HClO and phosphorylation, which holds promise for early atherosclerotic disease assessment.

Current research trends of nanomedicines

Owing to the inherent shortcomings of traditional therapeutic drugs in terms of inadequate therapeutic efficacy and toxicity in clinical treatment, nanomedicine designs have received widespread attention with significantly improved efficacy and reduced non-target side effects. Nanomedicines hold tremendous theranostic potential for treating, monitoring, diagnosing, and controlling various diseases and are attracting an unfathomable amount of input of research resources. Against the backdrop of an exponentially growing number of publications, it is imperative to help the audience get a panorama image of the research activities in the field of nanomedicines. Herein, this review elaborates on the development trends of nanomedicines, emerging nanocarriers, in vivo fate and safety of nanomedicines, and their extensive applications. Moreover, the potential challenges and the obstacles hindering the clinical translation of nanomedicines are also discussed. The elaboration on various aspects of the research trends of nanomedicines may help enlighten the readers and set the route for future endeavors.

Design of Zeolitic Imidazolate Framework-8-Functionalized Capacitive Micromachined Ultrasound Transducer Gravimetric Sensors for Gas and Hydrocarbon Vapor Detection

A capacitive micromachined ultrasound transducer (CMUT) was engineered and functionalized with zeolitic imidazolate framework-8 (ZIF-8) dispersed in a photoresist AZ1512HS (AZ) matrix to function as a gravimetric gas sensor. The sensor response was recorded in the presence of nitrogen, argon, carbon dioxide, and methane gases as well as water, acetylene, a propane/butane mixture, n-hexane, gasoline, and diesel vapors. The photoresist matrix alone was found to have a negligible response to all the gases and vapors, except for water vapor. No visible difference in sensor response was detected when switching from nitrogen to methane gas. However, a strong shift in the sensor resonance frequency was observed when exposed to higher hydrocarbons, ranging from 1 kHz for acetylene to 7.5 kHz for gasoline. Even longer-chain hydrocarbons, specifically kerosene and more so diesel, had a significantly reduced sensor frequency shift compared with gasoline. Sensors functionalized with a thin film of AZ+ZIF-8 demonstrated higher sensitivity in their response to a hydrocarbon molecular mass than without functionalization.

In vivo evaluation of bone regeneration using ZIF8-modified polypropylene membrane in rat calvarium defects

AIM

The profound potential of zeolitic imidazolate framework 8 (ZIF8) thin film for inducing osteogenesis has been previously established under in vitro conditions. As the next step towards the clinical application of ZIF8-modified substrates in periodontology, this in vivo study aimed to evaluate the ability of the ZIF8 crystalline layer to induce bone regeneration in an animal model defect.

MATERIALS AND METHODS

Following the mechanical characterization of the membranes and analysing the in vitro degradation of the ZIF8 layer, in vivo bone regeneration was evaluated in a critical-sized (5-mm) rat calvarial bone defect model. For each animal, one defect was randomly covered with either a polypropylene (PP) or a ZIF8-modified membrane (n = 7 per group), while the other defect was left untreated as a control. Eight weeks post surgery, bone formation was assessed by microcomputed tomography scanning, haematoxylin and eosin staining and immunohistochemical analysis.

RESULTS

The ZIF8-modified membrane outperformed the PP membrane in terms of mechanical properties and revealed a trace Zn+2 release. Results of in vivo evaluation verified the superior barrier function of the ZIF8-coated membrane compared with pristine PP membrane. Compared with the limited marginal bone formation in the control and PP groups, the defect area was almost filled with mature bone in the ZIF8-coated membrane group.

CONCLUSIONS

Our results support the effectiveness of the ZIF8-coated membrane as a promising material for improving clinical outcomes of guided bone regeneration procedures, without using biological components.

Optically Active MXenes in Van der Waals Heterostructures

The vertical integration of distinct 2D materials in van der Waals (vdW) heterostructures provides the opportunity for interface engineering and modulation of electronic as well as optical properties. However, scarce experimental studies reveal many challenges for vdW heterostructures, hampering the fine-tuning of their electronic and optical functionalities. Optically active MXenes, the most recent member of the 2D family, with excellent hydrophilicity, rich surface chemistry, and intriguing optical properties, are a novel 2D platform for optoelectronics applications. Coupling MXenes with various 2D materials into vdW heterostructures can open new avenues for the exploration of physical phenomena of novel quantum-confined nanostructures and devices. Therefore, the fundamental basis and recent findings in vertical vdW heterostructures composed of MXenes as a primary component and other 2D materials as secondary components are examined. Their robust designs and synthesis approaches that can push the boundaries of light-harvesting, transition, and utilization are discussed, since MXenes provide a unique playground for pursuing an extraordinary optical response or unusual light conversion features/functionalities. The recent findings are finally summarized, and a perspective for the future development of next-generation vdW multifunctional materials enriched by MXenes is provided.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Recent Developments in Two-Dimensional Materials-Based Membranes for Oil-Water Separation

The industrialization witnessed in the last century has resulted in an unprecedented increase in water pollution. In particular, the water pollution induced by oil contaminants from oil spill accidents, as well as discharges from pharmaceutical, oil/gas, and metal processing industries, have raised concerns due to their potential to pose irreversible threats to the ecosystems. Therefore, the effective treating of these large volumes of oily wastewater is an inevitable challenge to address. Separating oil-water mixtures by membranes has been an attractive technology due to the high oil removal efficiency and low energy consumption. However, conventional oil-water separation membranes may not meet the complex requirements for the sustainable treatment of wastewater due to their relatively shorter life cycle, lower chemical and thermal stability, and permeability/selectivity trade-off. Recent advancements in two-dimensional (2D) materials have provided opportunities to address these challenges. In this article, we provide a brief review of the most recent advancements in oil-water separation membranes modified with 2D materials, with a focus on MXenes, graphenes, metal-organic frameworks, and covalent organic frameworks. The review briefly covers the backgrounds, concepts, fabrication methods, and the most recent representative studies. Finally, the review concludes by describing the challenges and future research directions.

Improved stability and activity of laccase through de novo and post-synthesis immobilization on a hierarchically porous metal-organic framework (ZIF-8)

Porous materials such as metal-organic frameworks (MOFs) are considered to be suitable materials for immobilizing enzymes to improve their stability. However, conventional MOFs reduce the enzymes' catalytic activity due to difficulties with mass transfer and diffusing reactants after their micropores are occupied by enzyme molecules. To address these issues, a novel hierarchically structured zeolitic imidazolate framework-8 (HZIF-8) was prepared to study the effects of different laccase immobilization approaches such as the post-synthesis (LAC@HZIF-8-P) and de novo (LAC@HZIF-8-D) immobilization of catalytic activities for removing 2,4-dichlorophenol (2,4-DCP). The results showed higher catalytic activity for the laccase-immobilized LAC@HZIF-8 prepared using different methods than for the LAC@MZIF-8 sample, with 80% of 2,4-DCP removed under optimal conditions. These results could be attributable to the multistage structure of HZIF-8. The LAC@HZIF-8-D sample was stable and superior to LAC@HZIF-8-P, maintaining a 2,4-DCP removal efficiency of 80% after three recycles and demonstrating superior laccase thermostability and storage stability. Moreover, after loading with copper nanoparticles, the LAC@HZIF-8-D approach exhibited a 2,4-DCP removal efficiency of 95%, a promising finding for its potential use in environmental purification.

The development of chiral metal-organic frameworks for enantioseparation of racemates

MIL-101(Cr), an achiral metal-organic framework, made up of a terephthalic acid ligand and a metal chromium ion was selected as a template. Its structural features are unsaturated Lewis acid sites that can be easily activated and it has an extremely high specific surface area, big pore size, and good thermal/chemical/water stability. This achiral framework was modified to introduce chirality within the structure to develop chiral metal-organic frameworks (CMOFs). Here, natural chiral ligands, amino acids (l-proline, l-thioproline and l-tyrosine), were selected for post synthetic modification (PSM) of MIL-101(Cr). This is a very simple, clean and facile methodology with respect to the reactants and reaction conditions. CMOFs 1-3 abbreviated as MIL-101-l-proline (CMOF-1), MIL-101-l-thioproline (CMOF-2) and MIL-101-l-tyrosine (CMOF-3) were prepared by introducing l-proline, l-thioproline and l-tyrosine as chiral moieties within the framework of (Cr). These CMOFs were characterized by FTIR, PXRD, SEM, and thermo gravimetric analysis. Chirality within these CMOFs 1-3 was established by circular dichroism (CD) and polarimetric methods. These three CMOFs 1-3 showed enantioselectivity towards RS-ibuprofen, RS-mandelic acid and RS-1-phenylethanol to varying extents. Their enantioselectivity towards racemates was studied by chiral HPLC and polarimetry.

Metal-Organic Framework (MOF)-A Universal Material for Biomedicine

Metal-organic frameworks (MOFs) are a very promising platform for applications in various industries. In recent years, a variety of methods have been developed for the preparation and modification of MOFs, providing a wide range of materials for different applications in life science. Despite the wide range of different MOFs in terms of properties/sizes/chemical nature, they have not found wide application in biomedical practices at present. In this review, we look at the main methods for the preparation of MOFs that can ensure biomedical applications. In addition, we also review the available options for tuning the key parameters, such as size, morphology, and porosity, which are crucial for the use of MOFs in biomedical systems. This review also analyses possible applications for MOFs of different natures. Their high porosity allows the use of MOFs as universal carriers for different therapeutic molecules in the human body. The wide range of chemical species involved in the synthesis of MOFs makes it possible to enhance targeting and prolongation, as well as to create delivery systems that are sensitive to various factors. In addition, we also highlight how injectable, oral, and even ocular delivery systems based on MOFs can be used. The possibility of using MOFs as therapeutic agents and sensitizers in photodynamic, photothermal, and sonodynamic therapy was also reviewed. MOFs have demonstrated high selectivity in various diagnostic systems, making them promising for future applications. The present review aims to systematize the main ways of modifying MOFs, as well as the biomedical applications of various systems based on MOFs.

Induction of cytotoxic effects and changes in DNA methylation-related gene expression in a human fibroblast cell line by the metal-organic framework [H2NMe2]3 [Tb(III)(2,6 pyridinedicarboxylate)3] (Tb-MOF)

Lanthanide metal-organic frameworks (lanthanide MOFs) may be utilized for a variety of environmental and human health applications due to their luminescent properties and high thermal and water stability. However, the cytotoxic and epigenetic effects produced in human cells are not known. Therefore, we evaluated the cytotoxic effects, internalization, and changes in the mRNA abundance of DNA methylation and demethylation enzymes by exposing human fibroblast cells to a metal-organic framework [H₂NMe₂]₃ [Tb(III)(2,6 pyridinedicarboxylate)₃] (Tb-MOF). For this purpose, the cells were exposed to six concentrations (0.05 to 1.6 mg/mL) of Tb-MOF for 48 h. Field emission electron microscopy coupled to linear energy dispersive spectroscopy (FESEM‒EDS) and confocal microscopy analysis were performed. The cytotoxicity was determined with crystal violet and MTT assays. The results demonstrated the internalization of Tb-MOF at concentrations as low as 0.05 mg/mL, as well as concentration-dependent toxicity. Additionally, we detected significant changes in the gene expression levels of DNA methyltransferases and demethylases due to the presence of Tb-MOF, suggesting that Tb-MOF could generate epigenetic changes even at low concentrations. The results of our study may establish a foundation for future research attempting to develop and apply secure nanomaterials (e.g., MOFs) to minimize damage to the environment and human health.

XRD and Spectroscopic Investigations of ZIF-Microchannel Glass Plates Composites

In this study, new composite materials comprising zeolitic imidazolate framework (ZIF) structures and microchannel glass (MCG) plates were fabricated using the hydrothermal method and their morphological and spectral properties were investigated using XRD, SEM, FTIR, and Raman spectroscopy. XRD studies of powder samples revealed the presence of an additional phase for a ZIF-8 sample, whereas ZIF-67 samples, which were prepared through two different chemical routes, showed no additional phases. A detailed analysis of the FTIR and micro-Raman spectra of the composite samples revealed the formation of stable ZIF structures inside the macropores of the MCG substrate. The hydrophilic nature of the MCG substrate and its interaction with the ZIF structure resulted in the formation of stable ZIF-MCG composites. We believe that these composite materials may find a wide range of important applications in the field of sensors, molecular sieving.

Metal-organic frameworks as promising solid-phase sorbents for the isolation of third-generation synthetic cannabinoids in biological samples

In this work, metal-organic frameworks (MOFs) were used for the first time as solid-phase extraction (SPE) sorbents for the isolation of synthetic cannabinoids (SCs) from oral fluids and subsequently quantified by LC-fluorescence detection (FLD). In this context, different MOF families were synthesized and tested under SPE mode. UiO-66 was the family selected, being the amino functionalized (NH₂-UiO-66) the best candidate in terms of extraction performance. After the method optimization, several analytical parameters of interest were obtained, reaching limits of detection (LODs) as low as 0.6-0.8 μg L^-1 and precision values (expressed as RSD) lower than 10.6%. The developed method was successfully applied to the determination of 8 SCs in different oral fluids at three spiked levels with recoveries between 67 and 114%. This method claims to be a real alternative for screening purposes, being a cost-effective procedure due to the price of the sorbent (<0.5 €/cartridge) and its recyclability (up to 12 uses), among others good features.

Electrochemical-Based Sensing Platforms for Detection of Glucose and H2O2 by Porous Metal-Organic Frameworks: A Review of Status and Prospects

Establishing enzyme-free sensing assays with great selectivity and sensitivity for glucose and H₂O₂ detection has been highly required in biological science. In particular, the exploitation of nanomaterials by using noble metals of high conductivity and surface area has been widely investigated to act as selective catalytic agents for molecular recognition in sensing platforms. Several approaches for a straightforward, speedy, selective, and sensitive recognition of glucose and H₂O₂ were requested. This paper reviews the current progress in electrochemical detection using metal-organic frameworks (MOFs) for H₂O₂ and glucose recognition. We have reviewed the latest electrochemical sensing assays for in-place detection with priorities including straightforward procedure and manipulation, high sensitivity, varied linear range, and economic prospects. The mentioned sensing assays apply electrochemical systems through a rapid detection time that enables real-time recognition. In profitable fields, the obstacles that have been associated with sample preparation and tool expense can be solved by applying these sensing means. Some parameters, including the impedance, intensity, and potential difference measurement methods have permitted low limit of detections (LODs) and noticeable durations in agricultural, water, and foodstuff samples with high levels of glucose and H₂O₂.

Application of a Novel Au@ZIF-8 Composite in the Detection of Bisphenol A by Surface-Enhanced Raman Spectroscopy

Bisphenol A (BPA) is an endocrine disruptor which is widely present in fish under the influence of environmental pollution. It is essential to establish a rapid detection method for BPA. Zeolitic imidazolate framework (ZIF-8) is a typical metal-organic framework material (MOFs) with a strong adsorption capacity, which can effectively adsorb harmful substances in food. Combining MOFs and surface-enhanced Raman spectroscopy (SERS) can achieve rapid and accurate screening of toxic substances. In this study, a rapid detection method for BPA was established by preparing a new reinforced substrate Au@ZIF-8. The SERS detection method was optimized by combining SERS technology with ZIF-8. The Raman peak at 1172 cm^-1 was used as the characteristic quantitative peak, and the lowest detection concentration of BPA was as low as 0.1 mg/L. In the concentration range of 0.1~10 mg/L, the linear relationship between SERS peak intensity and the concentration of BPA was good, and R² was 0.9954. This novel SERS substrate was proven to have great potential in rapidly detecting BPA in food.

Metal-Organic Framework-Based Colloidal Particle Synthesis, Assembly, and Application

Metal-organic frameworks (MOFs) assembled from metal nodes and organic ligands have received significant attention over the past two decades for their fascinating porous properties and broad applications. Colloidal MOFs (CMOFs) not only inherit the intrinsic properties of MOFs, but can also serve as building blocks for self-assembly to make functional materials. Compared to bulk MOFs, the colloidal size of CMOFs facilitates further manipulation of CMOF particles in a single or collective state in a liquid medium. The resulting crystalline order obtained by self-assembly in position and orientation can effectively improve performance. In this review, we summarize the latest developments of CMOFs in synthesis strategies, self-assembly methods, and related applications. Finally, we discuss future challenges and opportunities of CMOFs in synthesis and assembly, by which we hope that CMOFs can be further developed into new areas for a wider range of applications.

Highly Selective MOF-Based Turn-Off Luminescence Detection of Hg2+ Ions in an Aqueous Medium and Its Dual Functional Catalytic Activity toward Aldol Condensation and β-Enamination Reactions

A new organic ligand, 5-(carboxyformamido)isophthalic acid (5-CFIA), was prepared and employed for the synthesis of two compounds [M₃(C₁₀H₄O₇N₁)₂(8H₂O)]·H₂O (M = Cd, Mn). The compounds have three-dimensionally extended structures. Both the compounds were found to be luminescent at room temperature. The luminescence nature was exploited for the detection of Hg²⁺ ions in an aqueous medium with good selectivity. The interactions between Hg²⁺ ions and the compounds quench the luminescence intensity and act as a turn-off sensor. Both the compounds exhibited low limits for the detection of Hg²⁺ ions and in the range mandated by the WHO. The interactions between Hg²⁺ ions and the compound involve the -NH group, which was probed using Raman and IR spectroscopic techniques. These studies provide important pointers toward the mechanism of this turn-off luminescence behavior. The compounds were explored for base-catalyzed aldol condensation and Lewis acid-promoted β-enaminoester formation reactions. The aldol condensation reaction uses the -NH functionality as a base. The studies indicate that the electron-withdrawing group produces products with higher yields. The β-enaminoester reaction uses the Lewis acid centers, and the studies reveal that the electron-withdrawing groups produce lesser yields of the products. The catalytic nature of the reaction and recyclability of the catalysts were also established. The catalytic reactions employ ethanol (aldol condensation) and no solvent (β-enaminoester), which suggests that the reactions are green and environmentally friendly. The Mn compound was observed to be anti-ferromagnetic.

Fast preparation of Eu(BTB) MOFs in dielectric barrier discharge liquid plasma for luminescent sensing of trace iron

Lanthanide metal-organic frameworks Eu(BTB) MOFs was synthesized in low-temperature plasma produced by dielectric barrier discharge (DBD). This DBD synthesis possesses the characteristics of rapid reaction (within 20 min), mild condition (low temperature and atmospheric pressure) and simple operation compared with many traditional synthesis methods. The prepared Eu(BTB) MOF material exhibits typical red light emitting of europium (Eu³⁺ ) at 617 nm, which can selectively and sensitively be quenched in the presence of trace iron(III) ion (Fe³⁺ ). A simple, fast and sensitive fluorescence sensing strategy of Fe³⁺ was thus constructed, with a limit of detection (LOD) of 0.5 μM. Compared with reported fluorescence probes, Eu(BTB) MOFs have also demonstrated the advantages of low cost, easy and fast preparation, great stability, and excellent optical properties, thus making them a promising fluorescence candidate for trace Fe³⁺ sensing for the potential application in biological systems in the future.

Influence of Tartrate Ligand Coordination over Luminescence Properties of Chiral Lanthanide-Based Metal-Organic Frameworks

The present work reports on a detailed discussion about the synthesis, characterization, and luminescence properties of three pairs of enantiopure 3D metal-organic frameworks (MOFs) with general formula {[Ln₂(L/D-tart)₃(H₂O)₂]·3H₂O}_n (3D_Ln-L/D, where Ln = Sm(III), Eu(III) or Gd(III), and L/D-tart = L- or D-tartrate), and ten pairs of enantiopure 2D coordination polymers (CPs) with general formula [Ln(L/D-Htart)₂(OH)(H₂O)₂]_n (2D_Ln-L/D, where Ln = Y(III), Sm(III), Eu(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III) or Yb(III), and L/D-Htart = hydrogen L- or D-tartrate) based on single-crystal X-ray structures. Enantiopure nature of the samples has been further corroborated by Root Mean Square Deviation (RMSD) as well as by circular dichroism (CD) spectra. Solid-state emission spectra of Eu(III), Tb(III), and Dy(III)-based compounds confirm the occurrence of ligand-to-metal charge transfers in view of the characteristic emissions for these lanthanide ions, and emission decay curves were also recorded to estimate the emission lifetimes for the reported compounds. A complete theoretical study was accomplished to better understand the energy transfers occurring in the Eu-based counterparts, which allows for explaining the different performances of 3D-MOFs and 2D-layered compounds. As inferred from the colorimetric diagrams, emission characteristics of Eu-based 2D CPs depend on the temperature, so their luminescent thermometry has been determined on the basis of a ratiometric analysis between the ligand-centered and Eu-centered emission. Finally, a detailed study of the polarized luminescence intensity emitted by the samples is also accomplished to support the occurrence of chiro-optical activity.

Lanthanide(III) Ions and 5-Methylisophthalate Ligand Based Coordination Polymers: An Insight into Their Photoluminescence Emission and Chemosensing for Nitroaromatic Molecules

The work presented herein reports on the synthesis, structural and physico-chemical characterization, luminescence properties and luminescent sensing activity of a family of isostructural coordination polymers (CPs) with the general formula [Ln₂(μ₄-5Meip)₃(DMF)]_n (where Ln(III) = Sm (1_Sm), Eu (2_Eu), Gd (3_Gd), Tb (4_Tb) and Yb (5_Yb) and 5Meip = 5-methylisophthalate, DMF = N,N-dimethylmethanamide). Crystal structures consist of 3D frameworks tailored by the linkage between infinite lanthanide(III)-carboxylate rods by means of the tetradentate 5Meip ligands. Photoluminescence measurements in solid state at variable temperatures reveal the best-in-class properties based on the capacity of the 5Meip ligand to provide efficient energy transfers to the lanthanide(III) ions, which brings intense emissions in both the visible and near-infrared (NIR) regions. On the one hand, compound 5_Yb displays characteristic lanthanide-centered bands in the NIR with sizeable intensity even at room temperature. Among the compounds emitting in the visible region, 4_Tb presents a high QY of 63%, which may be explained according to computational calculations. At last, taking advantage of the good performance as well as high chemical and optical stability of 4_Tb in water and methanol, its sensing capacity to detect 2,4,6-trinitrophenol (TNP) among other nitroaromatic-like explosives has been explored, obtaining high detection capacity (with K_sv around 10⁵ M^-1), low limit of detection (in the 10^-6-10^-7 M) and selectivity among other molecules (especially in methanol).

Self-Powered UVC Photodetector Based on Europium Metal-Organic Framework for Facile Monitoring Invisible Fire

The effective use of a europium metal-organic framework (Eu-MOF) as a photoabsorber material has been reported. Using the advantages of Eu-MOFs including simple preparation, wide bandgap structure, and stability in the environment, a self-powered and high UVC-selectivity detector based on Eu-MOF nanoparticles was prepared with a simple device geometry. The as-fabricated photodetector was highly sensitive to 254 nm UV illumination without an external power supply. Accordingly, it exhibited a high UVC-to-UVA rejection ratio (I₂₅₄/I₃₆₅ ≈ 40) and UVC-to-solar rejection ratio (I₂₅₄/I_solar light ≈ 34), a fast response time of 98/122 ms, a comparable on/off photocurrent ratio (107.33), and superior stability. The self-powered Eu-MOF photodetector can detect and monitor UV emission from an invisible fire in an early state at room temperature, suggesting practical use as a potential optoelectronic device.

A quest for cytocompatible metal organic frameworks in non-viral gene therapy: Relevance of zeolitic imidazolate framework-8

Metal-organic frameworks (MOFs) are an emerging group of nanomaterials for successful biomedical applications in gene therapy. The most commonly biocompatible MOFs are zinc-based ZIFs, zirconium-based UiOs, and iron-based MILs. However, despite increasing applications, a comparative study to underscore the critical factors for determining effective gene delivery by such MOFs is lacking. Herein, we evaluate the potential of UiO-66 and MIL-88B and ZIF-8 for gene therapeutics delivery; revealing the comparative importance of ZIF-8. Cytotoxicity assays proved insufficient for selecting the ideal gene delivery MOF vehicle. Synthesis conditions such as ability of the MOF scaffold to envelop the gene during in-situ synthesis, post-treatment such as washing, and gene loading efficiency proved to be the critical factors in determining the favourable MOF from the material selection perspective. Rapid in-situ synthesis under physiological conditions, successful gene loading, and low concentration requirements favour ZIF MOFs as gene delivery vehicles. Impact on cellular physiology, metabolism, and architecture revealed neutrality of the delivery system; and relative effects on pro-inflammatory and anti-inflammatory cytokines suggest immunomodulatory impact.

Recent progress in the design, synthesis and applications of chiral metal-organic frameworks

Chiral Metal-Organic Frameworks (CMOFs) are unique crystalline and porous class of materials which is composed of organic linkers and metal ions. CMOFs surpass traditional organic and inorganic porous materials because of their tunable shape, size, functional diversity, and selectivity. Specific applications of CMOFs may be exploited by introducing desired functional groups. CMOFs have chiral recognition abilities, making them unique for chiral compound synthesis and separation. The CMOFs can be synthesized through different approaches. Two main approaches have been discussed, i.e., direct and indirect synthesis. Synthetic strategies play an essential role in getting desired properties in MOFs. CMOFs find potential applications in adsorption, asymmetric catalysis, luminescence, degradation, and enantioselective separation. The MOFs’ porosity, stability, and reusability make them an attractive material for these applications. The plethora of applications of CMOFs have motivated chemists to synthesize novel MOFs and number of MOFs have been ever-escalating. Herein, the synthetic methods of CMOFs and their various applications have been discussed.

Ligand Incorporating Sequence-dependent ZIF67 Derivatives as Active Material of Supercapacitor: Competition between Ammonia Fluoride and 2-Methylimidazole

The zeolitic imidazolate framework 67 (ZIF67) derivative is a potential active material of supercapacitors (SC), owing to high specific surface area and porosity and possible formation of cobalt compounds. A novel ZIF67 derivative is synthesized using a one-step solution process with cobalt precursor 2-methylimidazole (2-Melm) and ammonia fluoride in our previous work. Due to its facile synthesis and excellent electrocapacitive behavior, it is crucial to understand the competition between ammonia fluoride and 2-Melm on forming derivatives with cobalt ions and to create more efficient ZIF67 derivatives for charge storage. In this work, several ZIF67 derivatives are designed using a one-step solution process with 2-Melm and ammonia fluoride incorporated in different sequences. The reaction durations for a single ligand and two ligands are controlled. The largest capacity of 176.33 mAh/g corresponding to the specific capacitance of 1057.99 F/g is achieved for the ZIF67 derivative electrode prepared by reacting ammonia fluoride and a cobalt precursor for 0.5 h and then incorporating 2-Melm for another 23.5 h of reaction (NM0.5). This derivative composed of highly conductive CoF₂, NiF₂, Co(OH)F, and Ni(OH)F presents high specific surface area and porosity. The relevant SC presents a maximum energy density of 19.5 Wh/kg at 430 W/kg, a capacity retention of 92%, and Coulombic efficiency of 96% in 10000 cycles.

Green Recycling Methods to Treat Lithium-Ion Batteries E-Waste: A Circular Approach to Sustainability

E-waste generated from end-of-life spent lithium-ion batteries (LIBs) is increasing at a rapid rate owing to the increasing consumption of these batteries in portable electronics, electric vehicles, and renewable energy storage worldwide. On the one hand, landfilling and incinerating LIBs e-waste poses environmental and safety concerns owing to their constituent materials. On the other hand, scarcity of metal resources used in manufacturing LIBs and potential value creation through the recovery of these metal resources from spent LIBs has triggered increased interest in recycling spent LIBs from e-waste. State of the art recycling of spent LIBs involving pyrometallurgy and hydrometallurgy processes generates considerable unwanted environmental concerns. Hence, alternative innovative approaches toward the green recycling process of spent LIBs are essential to tackle large volumes of spent LIBs in an environmentally friendly way. Such evolving techniques for spent LIBs recycling based on green approaches, including bioleaching, waste for waste approach, and electrodeposition, are discussed here. Furthermore, the ways to regenerate strategic metals post leaching, efficiently reprocess extracted high-value materials, and reuse them in applications including electrode materials for new LIBs. The concept of "circular economy" is highlighted through closed-loop recycling of spent LIBs achieved through green-sustainable approaches.

The Growth of Metal–Organic Frameworks in the Presence of Graphene Oxide: A Mini Review

Integrated metal–organic frameworks (MOFs) with graphene oxide (GO) have aroused huge interest in recent years due to their unique properties and excellent performance compared to MOFs or GO alone. While a lot of attention has been focused on the synthesis methodologies and the performance analysis of the composite materials in recent years, the fundamental formation/crystallization mechanism(s) is (are) still not fully understood. Ascribed to the distinctive structural and functional properties of GO, the nucleation and crystallization process of MOFs could be altered/promoted, forming MOF/GO composite materials with different nanostructures. Furthermore, the MOF’s parental structure could also influence how the GO and MOF bond together. Thus, this short review attempted to provide critical and indepth discussions of recent research results with a particular focus on the factors that influence the directional growth of parent MOFs in the presence of graphene oxide. Due to the unique structure and enhanced properties, the derived MOF/GO composites have a wide range of applications including gas separation, electrochemistry, and photocatalysis. We hope this review will be of interest to researchers working on MOF design, crystal structure control (e.g., orientation), and composite materials development.

The pioneering role of metal-organic framework-5 in ever-growing contemporary applications - a review

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties. MOF-5 based composites possess ample applications in modern chemistry. Huge surface area, suitable pore dimensions and scope of tunability make MOF-5 noteworthy in advanced materials. The extensive features of MOF-5 provided an opportunity for researchers to explore atomic/molecular scale materials. Various MOF-5 based composites have been designed with revamped properties appropriate to the application by altering and fabricating MOF-5 in situ or using a post-synthetic approach. Surface modification via the dispersion and impregnation of active substances into the pores of MOF-5 enhances its applicability. The boundless topologies and morphologies of MOF-5 combined with other chemical entities has provided opportunities in various fields, including catalysis, gas storage and sensors. The present review illuminates the leading role of MOF-5 and its composites in contemporary applications based on the current literature in heterogeneous catalysis, H₂ and CO₂ storage and sensors.

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties.

DFT investigations of AgMC7H10N2 (M = Cl, Br, and I) metal organic molecules: NMR, optoelectronic, and transport properties

The full-potential linearized augmented plane wave (FP-LAPW) method was used for the calculation of the structural, nuclear magnetic resonance (NMR), optoelectronic, and thermoelectric properties of AgMC₇H₁₀N₂ (M = Cl, Br, and I) compounds. The calculated wide band gap of AgMC₇H₁₀N₂ (M = Cl, Br, and I) metal organic molecules with the density of states approach were 3.32, 3.29, and 3.10 eV, respectively. The NMR parameters are calculated for the Ag, Cl, Br, I, C, N, O, and H elements. It is found that by decreasing bandgap, the isotropic NMR chemical shielding values of Cl, Br, and I elements increase. The strong hybridization of Ag-4d, Cl-3p, Br-4p, and I-5p states are observed at the top of the valence band. The birefringence and anisotropic properties are observed in the optical spectra with high plasmon energies, and the figure of merit, ZT, of 0.98 for AgCl(C₇H₁₀N₂) compound is found at 300 K. Hence, these compounds are attractive flexible metal organic molecules for optoelectronic and transport applications.

Adsorption and photocatalytic properties of porphyrin loaded MIL-101 (Cr) in methylene blue degradation

In this study for the very first time, zinc tetraphenylporphyrin (ZnTPP) was loaded into MIL-101 (Zn[TPP]@MIL-101) to perform an adsorptive and photocatalytic dye removal. The physicochemical attributes of the catalyst were thoroughly determined by the usage of XRD, FTIR, FESEM, BET, UV-vis, and inductively coupled plasma (ICP). The obtained XRD pattern exhibited the phase purity of MIL-101 and its structural stability. The solid-phase diameter of the catalyst was observed to be ~ 270.76 ± 119.95 nm, while its gas adsorption data was indicative of a decrease in the specific surface area after the loading of ZnTPP. The ICP analysis displayed the amount of encapsulated Zn[TPP] (~ 17%) in MIL-101. The UV-vis confirmed the presence of Zn[TPP] in MIL-101 with the lack of any interferences or overlaps with the λ_max of methylene blue (MB) with the support. The dye removal of MB was investigated under dark conditions (adsorption) and UV light (photodegradation). The observed adsorption under dark conditions using Zn[TPP]@MIL-101 (99.27% yield) demonstrated a superior dye removal in comparison to the cases of photodegradation of MB by MIL-101 and Zn[TPP]@MIL-101 or adsorption by MIL-101. In conformity to the gathered results, [ZnTPP] was able to increase the adsorption capacity at pH = 7 at room temperature.

Assembly of a 3D Cobalt(II) Supramolecular Framework and Its Applications in Hydrofunctionalization of Ketones and Aldehydes

A ditopic nitrogen ligand (E)-N′-(pyridin-4-ylmethylene)isonicotinohydrazide (L) containing both divergent pyridyl coordination sites and a hydrogen-bonding hydrazide–hydrazone moiety was synthesized. The Co(NCS)2-mediated self-assembly of L has resulted in the synthesis of a novel 3-dimensional (3D) supramolecular framework (1) that features both coordination and hydrogen bonding interactions. X-ray structural analysis reveals the formation and coordination mode of 1 in the solid state. The rational utilization of coordination bonds and hydrogen bonding interactions is confirmed and responsible for constructing the 3D materials. Catalytic studies using 1 in the presence of an activator are performed for the hydroboration and hydrosilylation reactions of ketones and aldehydes, and the results are compared with previously reported cobalt-based polymeric catalysts.

The uptake characteristics of Prussian-blue nanoparticles for rare metal ions for recycling of precious metals from nuclear and electronic wastes

We have examined the uptake mechanisms of platinum-group-metals (PGMs) and molybdenum (Mo) ions into Prussian blue nanoparticles (PBNPs) in a nitric acid solution for 24-h sorption test, using inductively coupled plasma atomic emission spectroscopy, powder XRD, and UV–Vis-NIR spectroscopy in combination with first-principles calculations, and revealed that the Ru⁴⁺ and Pd²⁺ ions are incorporated into PBNPs by substitution with Fe³⁺ and Fe²⁺ ions of the PB framework, respectively, whereas the Rh³⁺ ion is incorporated into PBNPs by substitution mainly with Fe³⁺ and minorly with Fe²⁺ ion, and Mo⁶⁺ ion is incorporated into PBNPs by substitution with both Fe²⁺ and Fe³⁺ ions, with maintaining the crystal structure before and after the sorption test. Assuming that the amount of Fe elusion is equal to that of PGMs/Mo substitution, the substitution efficiency is estimated to be 39.0% for Ru, 47.8% for Rh, 87% for Pd, and 17.1% for Mo⁶⁺. This implies that 0.13 g of Ru, 0.16 g of Rh, 0.30 g of Pd, and 0.107 g of Mo can be recovered by using 1 g PBNPs with a chemical form of KFe(III)[Fe(II)(CN)₆].