Peptide-based fluorescent chemical sensors for the specific detection of Cu2+ and S2−

Semi-quantitative and visual detection of Cu2+ and glyphosate in real samples and living cells using fluorescent and colorimetric dual-signals peptide-based probe

The excessive emission of copper ions (Cu2+) and the abuse of glyphosate (Glyp) have caused serious harm to the ecological environment and human health, so it is important to develop a fast and convenient method for the analysis of Cu2+ and glyphosate to ensure environmental and food safety. Herein, a dual-signals peptide-based probe (FASRH) with fluorescent and colorimetric was prepared using 5-carboxyl fluorescein modified tetrapeptide (Ala-Ser-Arg-His-NH2). FASRH was successfully used to recognize Cu2+ as a fluorescence "on-off" probe, forming the FASRH-Cu2+ complex with non-fluorescence. As a new promising cascade probe, FASRH-Cu2+ complex probe has high selectivity (only Glyp), good sensitivity (50.2 nM), good anti-interference ability and wide pH range (7.0-11.0) for the detection of glyphosate by ligand replacement method. In addition, the recognizable color changed markedly under 365 nm UV light and natural light. Notably, FASRH not only achieved accurate monitoring of Cu2+ and glyphosate in two real water samples, but also successfully applied to detect Cu2+ and glyphosate in live Hacat cells based on low cytotoxicity. Moreover, it is worth noting that FASRH-impregnated test strips exhibited significant fluorescence and colorimetric color changes for Cu2+ and glyphosate via naked eye. Furthermore, smartphone-assisted FASRH was used for the portable detection of Cu2+ and glyphosate based on the advantages of simplicity, low cost and fast response.

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

New Amino Acid-Based Thiosemicarbazones and Hydrazones: Synthesis and Evaluation as Fluorimetric Chemosensors in Aqueous Mixtures

Bearing in mind the interest in the development and application of amino acids/peptides as bioinspired systems for sensing, a series of new phenylalanine derivatives bearing thiosemicarbazone and hydrazone units at the side chain were synthesised and evaluated as fluorimetric chemosensors for ions. Thiosemicarbazone and hydrazone moieties were chosen because they are considered both proton-donor and proton-acceptor, which is an interesting feature in the design of chemosensors. The obtained compounds were tested for the recognition of organic and inorganic anions (such as AcO-, F-, Cl-, Br-, I-, ClO4-, CN-, NO3-, BzO-, OH-, H2PO4- and HSO4-) and of alkaline, alkaline-earth, and transition metal cations, (such as Na+, K+, Cs+, Ag+, Cu+, Cu2+, Ca2+, Cd2+, Co2+, Pb2+, Pd2+, Ni2+, Hg2+, Zn2+, Fe2+, Fe3+ and Cr3+) in acetonitrile and its aqueous mixtures in varying ratios via spectrofluorimetric titrations. The results indicate that there is a strong interaction via the donor N, O and S atoms at the side chain of the various phenylalanines, with higher sensitivity for Cu2+, Fe3+ and F- in a 1:2 ligand-ion stoichiometry. The photophysical and metal ion-sensing properties of these phenylalanines suggest that they might be suitable for incorporation into peptide chemosensory frameworks.

A novel Cu(II)-assisted peptide fluorescent probe for highly sensitive detection of glyphosate in real samples: real application in test strips and smartphone

Glyphosate (Glyp) is an organophosphorus herbicide, and its abuse causes potential harm to the environment and human health. Thus, the development of simple and portable methods for rapid and visual detection of glyphosate is of great importance. Herein, we successfully developed a new fluorescent probe L with dansyl fluorophore as a fluorescent dye and tetrapeptide (Ala-Ser-Arg-His-NH2) as a recognition group. According to the design, L exhibited a specific fluorescence quenching response to Cu2+ and formed an L-Cu2+ ensemble with a molecular ratio of 2:1, demonstrating a limit of detection (LOD) as low as 12.04 nM. Interestingly, the L-Cu2+ ensemble as a relay response probe exhibited a specific fluorescence "off-on" response to glyphosate without interference from other pesticides and anions based on the strong complexation of glyphosate and Cu2+. The LOD of the L-Cu2+ ensemble for glyphosate was calculated as 12.59 nM. Additionally, the results of three recovery experiments with real samples showed that L has good practicability and accuracy in detecting glyphosate. Test strips were also fabricated to achieve facile detection of glyphosate to demonstrate the practical application potential of the L-Cu2+ ensemble. The L-Cu2+ ensemble was integrated with a smartphone for semi-quantification of glyphosate in a field environment under a 365 nm UV lamp.

Construction of a novel ESIPT and AIE-based fluorescent sensor for sequentially detecting Cu2+ and H2S in both living cells and zebrafish

The development of effective methods for tracking Cu²⁺ and H₂S in living organisms is urgently required due to their vital function in a variety of pathophysiological processes. In this work, a new fluorescent sensor BDF with excited-state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE) features for the successive detection of Cu²⁺ and H₂S was constructed by introducing 3,5-bis(trifluoromethyl)phenylacetonitrile into the benzothiazole skeleton. BDF showed a fast, selective and sensitive fluorescence "turn off" response to Cu²⁺ in physiological media, and the situ-formed complex can serve as a fluorescence "turn on" sensor for highly selective detection of H₂S through the Cu²⁺ displacement approach. In addition, the detection limits of BDF for Cu²⁺ and H₂S were determined to be 0.05 and 1.95 μM, respectively. Encouraged by its favourable features, including strong red fluorescence from the AIE effect, large Stokes shift (285 nm), high anti-interference ability and good function at physiological pH as well as a low toxicity, BDF was successfully applied for the consequent imaging of Cu²⁺ and H₂S in both living cells and zebrafish, making it an ideal candidate for detecting and imaging of Cu²⁺ and H₂S in live systems.

Progress in the Development of Biosensors Based on Peptide-Copper Coordination Interaction

Copper ions, as the active centers of natural enzymes, play an important role in many physiological processes. Copper ion-based catalysts which mimic the activity of enzymes have been widely used in the field of industrial catalysis and sensing devices. As an important class of small biological molecules, peptides have the advantages of easy synthesis, excellent biocompatibility, low toxicity, and good water solubility. The peptide-copper complexes exhibit the characteristics of low molecular weight, high tenability, and unique catalytic and photophysical properties. Biosensors with peptide-copper complexes as the signal probes have promising application prospects in environmental monitoring and biomedical analysis and diagnosis. In this review, we discussed the design and application of fluorescent, colorimetric and electrochemical biosensors based on the peptide-copper coordination interaction.

A novel fluorescence sensor based on a tripodal carboxylic acid for detection and measurement of Cu2+ in tomato: Experimental and computational studies

A tripod organic compound, (4,4',4''-[1,3,5-Triazine-2,4,6-triyltris(oxy)] tribenzoic acid, TCPT), with donor triazine core and multiple fluorophore carboxylic motives, was prepared as an efficient ligand with high emission properties. The TCPT fluorescence emission properties as a chemical sensor were studied (λ_ex = 370nm) upon the addition of an appropriately diverse set of metal cations. The obtained results revealed the highly selective and efficient role of Cu²⁺ in quenching of TCPT, even with relevant interfering metal ions. The emission of TCPT was independent of the pH. The interaction of the sensor with Cu²⁺ and followed by absorption spectra and linear trend of the Stern-Volmer diagram, suggested a static quenching process. The density functional theory calculations were carried out to explore the identity of the electronic transition levels, HOMO-LUMO, and bandgap energies of TCPT. The linear range 1.00×10^-7-1.00×10^-6 M was obtained by fluorescence titration of a TCPT solution with Cu²⁺ ions at optimum conditions. The detection limit was calculated as 5.45×10^-8 M from the established calibration of titration data. The effect of various ions was studied, and there was no significant interference from the studied metal ions. For the real sample analysis, trace levels of Cu²⁺ ions were successfully determined in the tomato.

Peptide Linked Diacetylene Amphiphiles for Detection of Epitope Specific Antibodies

Antibodies produced in response to adaptive immunity provide a receptor with multiple sites for binding to a distinct epitope of an antigen. Determining antibody levels to specific antigens has important clinical applications in assessing immune status or deficiency, monitoring infectious or autoimmune diseases, and diagnosing allergies. Leveraging that a specific antibody will bind to a distinct small peptide epitope without requiring the entire antigen to be present, we demonstrate in this work a proof-of-concept assay to detect the presence of an antibody by using peptide epitopes linked to an amphiphile to generate a vesicle-based sensing system. By affording multiple copies of the epitope site on the vesicle, we revealed that the vesicles visibly aggregate in response to an antibody specific for that epitope due to multivalent binding provided by the antibody. We also uncovered the role of peptide surface density in providing accessible epitopes on the vesicles for antibody binding. In summary, using a peptide derived from the coat protein of human influenza virus directly linked to a diacetylene-containing amphiphile afforded peptide-laden vesicles that proved capable of detecting the presence of antibodies specific for human influenza hemagglutinin.

A novel hydrophilic fluorescent probe for Cu2+ detection and imaging in HeLa cells

Copper is an essential element in living systems and plays an important role in human physiology; therefore, methods to detect the concentration of copper ions in living organisms are important. Herein, we report a highly water-soluble naphthalimide-based fluorescent probe that can be used for the detection of Cu²⁺. The probe, BNQ, has high selectivity and sensitivity. The fluorescence intensity of the probe at 520 nm was visible to the naked eye under a UV lamp; upon the gradual addition of Cu²⁺, there was a colour change from green to nearly colourless. Furthermore, the detection limit of BNQ for Cu²⁺ was 45.5 nM. The detection mechanism was investigated using a Job's plot and density functional theory (DFT) calculations. In addition, owing to great biocompatibility, we were able to successfully use BNQ to detect Cu²⁺ in living HeLa cells with low toxicity.

Probe BNQ was successfully used for detection of exogenous Cu²⁺ in cells using a rare ESDPT sensing mechanism.