α-Tocopherol and resveratrol in emulsion-filled whey protein gels: Co-encapsulation and in vitro digestion

Recent advances in encapsulation of resveratrol for enhanced delivery

Due to its numerous biological activities, such as antioxidant, anti-inflammatory, antitumor, anti-atherosclerosis, anti-aging, anti-osteoporosis, anti-obesity, estrogenic, neuroprotective and cardioprotective effects, resveratrol has attracted a lot of attention in the food and pharmaceutical industries as a promising bioactive. However, low solubility in aqueous media, limited bioavailability, and low stability of resveratrol in hostile environments limit its applications. The necessity for a summary of recent developments is highlighted by the growing body of research on resveratrol encapsulation as a means of overcoming the mentioned application constraints. This review highlights the present developments in resveratrol delivery techniques, including spray drying, liposomes, emulsions, and nanoencapsulation. Bioaccessibility, bioavailability, stability, and release of resveratrol from encapsulating matrices are discussed. Future research should focus on encapsulation approaches with high loading capacity, targeted delivery, and controlled release. In light of the growing interest in resveratrol and the increasing complexity of resveratrol-based formulations, review of current encapsulation methods is crucial to address existing limitations and pave the way for the development of next-generation delivery systems. This review discusses how the delivery systems with different structures and release mechanisms can unlock the full potential and benefits of resveratrol by enhancing its bioavailability and stability.

Impact of κ-Carrageenan on the Cold-Set Pea Protein Isolate Emulsion-Filled Gels: Mechanical Property, Microstructure, and In Vitro Digestive Behavior

More understanding of the relationship among the microstructure, mechanical property, and digestive behavior is essential for the application of emulsion gels in the food industry. In this study, heat-denatured pea protein isolate particles and κ-carrageenan were used to fabricate cold-set emulsion gels induced by CaCl2, and the effect of κ-carrageenan concentration on the gel formation mechanism, microstructure, texture, and digestive properties was investigated. Microstructure analysis obtained by confocal microscopy and scanning electron microscopy revealed that pea protein/κ-carrageenan coupled gel networks formed at the polysaccharide concentration ranged from 0.25% to 0.75%, while the higher κ-carrageenan concentration resulted in the formation of continuous and homogenous κ-carrageenan gel networks comprised of protein enriched microdomains. The hydrophobic interactions and hydrogen bonds played an important role in maintaining the gel structure. The water holding capacity and gel hardness of pea protein emulsion gels increased by 37% and 75 fold, respectively, through increasing κ-carrageenan concentration up to 1.5%. Moreover, in vitro digestion experiments based on the INFOGEST guidelines suggested that the presence of 0.25% κ-carrageenan could promote the digestion of lipids, but the increased κ-carrageenan concentration could delay the lipid and protein hydrolysis under gastrointestinal conditions. These results may provide theoretical guidance for the development of innovative pea protein isolate-based emulsion gel formulations with diverse textures and digestive properties.

Mixed whey and pea protein based cold-set emulsion gels induced by calcium chloride: Fabrication and characterization

The cold-set gels of oil-in-water emulsions stabilized by mixtures of whey protein isolate (WPI) and pea protein isolate (PPI) with mass ratios of 10:0, 7:3, 5:5, 3:7, and 0:10 were investigated to evaluate the possibility of pea protein to replace milk protein. Particle size and surface charge of emulsions increased and decreased with raised PPI content, respectively. The redness and yellowness of emulsion gels were strengthened with elevated pea protein percentage and independent of calcium concentration applied. Considerable differences in water holding capacity were observed between samples with different mixed proteins and high percentage of pea protein gave better water retaining ability. Gradual decreases in hardness and chewiness of emulsion gels were observed at three calcium levels with the increased PPI proportion. FT-IR spectra indicated no new covalent bonds were generated between samples with different whey and pea protein mass ratios. As PPI concentration elevated, the network structure of emulsion gels gradually became loose and disordered. The established cold-set calcium-induced whey/pea protein composite gels may have the potential to be utilized as a new material to encapsulate and deliver environment sensitive bio-active substances.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Recent advances in oral delivery systems of resveratrol: foreseeing their use in functional foods

Herein, we review the current state-of-the-art on the use of micro- and nano-delivery systems, a possible solution to some of the drawbacks associated with the incorporation of resveratrol in foods. Specifically, we present an overview of a wide range of micro-nanostructures, namely, lipidic and polymeric, used for the delivery of resveratrol. Also, the gastrointestinal fate of resveratrol-loaded micro-nanostructures, as a critical parameter for their use as functional food, is explored in terms of stability, bioaccessibility, and bioavailability. Different micro-nanostructures are of interest for the development of functional foods given that they can provide different advantages and properties to these foods and even be tailor-made to address specific issues (e.g., controlled or targeted release). Therefore, we discuss a wide range of micro-nanostructures, namely, lipidic and polymeric, used to deliver resveratrol and aimed at the development of functional foods. It has been reported that the use of some production methodologies can be of greater interest than others, for example, emulsification, solvent displacement and electrohydrodynamic processing (EHDP) enable a greater increase in bioaccessibility. Additionally, the use of coatings facilitates further improvements in bioaccessibility, which is likely due to the increased gastric stability of the coated micro-nanostructures. Other properties, such as mucoadhesion, can also help improve bioaccessibility due to the increase in gut retention time. Additionally, cytotoxicity (e.g., biocompatibility, antioxidant, and anti-inflammatory) and possible sensorial impact of resveratrol-loaded micro- and nano-systems in foods are highlighted.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

A comprehensive review of protein-based carriers with simple structures for the co-encapsulation of bioactive agents

The rational design and fabrication of edible codelivery carriers are important to develop functional foods fortified with a plurality of bioactive agents, which may produce synergistic effects in increasing bioactivity and functionality to target specific health benefits. Food proteins possess considerable functional attributes that make them suitable for the delivery of a single bioactive agent in a wide range of platforms. Among the different types of protein-based carriers, protein-ligand nanocomplexes, micro/nanoparticles, and oil-in-water (O/W) emulsions have increasingly attracted attention in the codelivery of multiple bioactive agents, due to the simple and convenient preparation procedure, high stability, matrix compatibility, and dosage flexibility. However, the successful codelivery of bioactive agents with diverse physicochemical properties by using these simple-structure carriers is a daunting task. In this review, some effective strategies such as combined functional properties of proteins, self-assembly, composite, layer-by-layer, and interfacial engineering are introduced to redesign the carrier structure and explore the encapsulation of multiple bioactive agents. It then highlights success stories and challenges in the co-encapsulation of multiple bioactive agents within protein-based carriers with a simple structure. The partition, protection, and release of bioactive agents in these protein-based codelivery carriers are considered and discussed. Finally, safety and application as well as challenges of co-encapsulated bioactive agents in the food industry are also discussed. This work provides a state-of-the-art overview of protein-based particles and O/W emulsions in co-encapsulating bioactive agents, which is essential for the design and development of novel functional foods containing multiple bioactive agents.

Encapsulation of Folic Acid and α-Tocopherol in Lysozyme Particles and Their Bioaccessibility in the Presence of DNA

Protein particles have been reported as the potential carriers for the co-encapsulation of bioactive components. In this study, lysozyme, a basic protein, was used to simultaneously encapsulate folic acid and α-tocopherol at pH 4.0. The encapsulation efficiency and loading capacity of folic acid or α-tocopherol increased with its respective concentration. Folic acid had no influence on the encapsulation of α-tocopherol. However, the encapsulation of folic acid was improved by α-tocopherol below 40 μg/mL but reduced by α-tocopherol at higher concentrations. The encapsulation by lysozyme shielded folic acid, α-tocopherol, or both partially from the attack of 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical cation. No masking effect of lysozyme encapsulation on α-tocopherol was found in DPPH antioxidant activity assay. Furthermore, the DNA coating was used to improve the dispersion of lysozyme with folic acid and α-tocopherol. The lysozyme/DNA particles with folic acid and α-tocopherol showed a homogenous size distribution of 180-220 nm with ζ-potential values between -33 and -36 mV. The release and bioaccessibility of folic acid in lysozyme/DNA with α-tocopherol were similar to that of folic acid alone, while the release of α-tocopherol was delayed and its bioaccessibility was improved by encapsulation in lysozyme/DNA with folic acid. The data gathered here would provide guidance for the use of lysozyme-based co-encapsulating carriers in the development of functional foods.

Physicochemical properties, antioxidant activities and in vitro sustained release behaviour of co-encapsulated liposomes as vehicle for vitamin E and β-carotene

BACKGROUND

In this study the potential of liposomes as a vitamin E (VE) and β-carotene (βC) delivery system was examined. The co-encapsulated liposomes of βC and VE (L-VE-βC) were prepared and characterized. Their antioxidant properties were evaluated by free radical scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS), hydroxyl radical and lipid peroxidation assay. The in vitro sustained release behaviour was then investigated and discussed.

RESULTS

VE and βC were co-encapsulated in liposomes with high encapsulation efficiency, up to 92.49% and 86.16% for βC and VE, respectively. The antioxidant activities of L-VE-βC samples were significantly higher than that of single loaded liposome. Among different ratios of VE/βC, L-VE-βC at 5:3 exhibited the highest radical scavenging rates, with 66.80%, 56.58% and 34.39% for DPPH, ABTS and OH radical, respectively. L-VE-βC samples also had a good ability to inhibit lipid peroxidation, especially the sample with ratios of VE/βC at 5:3 and 3:1. In simulated gastrointestinal release, L-VE-βC exhibited an excellent sustained release behaviour in SGF with the accumulated rate at about 20%, while the release rate in SIF increased to over 80%, where they should be absorbed. The release kinetics analysis indicated that βC was released in the Higuchi model in stomach, and the Korsmeyr-Peppas model in intestine.

CONCLUSION

Compared to single loaded liposomes, the combined-loaded liposomes exhibited higher antioxidant activity and bioavailability, suggesting the potential applications in functional foods. © 2022 Society of Chemical Industry.

Potential uses of milk proteins as encapsulation walls for bioactive compounds: A review

Milk proteins have received much awareness due to their bioactivity. However, their encapsulation functions have not attracted enough attention. Milk proteins as encapsulation walls can increase the bioavailability of bioactive compounds. As the benefits of bioactive compounds are critically determined by bioavailability, the effect of interactions between milk proteins and active substances is a critical topic. In the present review, we summarize the effects of milk proteins as encapsulation walls on the bioavailability of active substances with a special focus. The methods and mechanisms of interactions between milk proteins and active substances are also discussed. The evidence collected in the present review suggests that when active substances are encapsulated by milk proteins, the bioavailability of active substances can be significantly affected. This review also provides valuable guidelines for the use of milk protein-based microcarriers.

Soy and whey protein isolate mixture/calcium chloride thermally induced emulsion gels: Rheological properties and digestive characteristics

We present the preparation and physicochemical properties of thermally induced emulsion gels of a soy protein isolate-whey protein isolate (SPI-WPI)/calcium chloride composite, and the analysis of their nutrient release behaviors using fat-soluble vitamin E as a model system by simulating its digestion in vitro. In general, the SPI-WPI composite emulsion gel was found to have better water-holding capacity and texture than the emulsion gels formed by the single protein. The microstructure and rheological properties of the gel suggested that the CaCl₂ concentration significantly influences the fundamental structure and mechanical properties of the SPI-WPI gel. The in vitro digestion experiments revealed that the mixed protein emulsion gel improves the bioavailability of vitamin E. This study is of great significance in the utilization of these natural emulsifiers, as they can be used in the development of emulsion delivery systems for lipophilic nutrients and other health products.

Effect of Ca2+ cross-linking on the properties and structure of lutein-loaded sodium alginate hydrogels

In order to construct nano-lutein hydrogels with sustained release properties, the basic properties and structure of nano-lutein hydrogels cross-linked with different concentrations of Ca²⁺ were investigated. The results showed that the highest loading capacity for lutein reached 770.88 μg/g, while the encapsulation efficiency was as high as 99.39%. When Ca²⁺ concentration was lower than 7.5 mM, the filling of lutein nanoparticles reduced the hardness and gumminess of the hydrogel. The resilience and cohesiveness of the hydrogel decreased as the concentration of Ca²⁺ increased. Filling with lutein nanoparticles and increasing Ca²⁺ concentration both increased the G' and G″. The hydrogel loaded with lutein showed different swelling properties in different pH environments, the filling of lutein nanoparticles inhibited the swelling of the hydrogel. When Ca²⁺ concentration was greater than 7.5 mM, the cut-off amount of lutein on the surface of the Ca²⁺ cross-linked hydrogel was larger. The digestive enzymes quickly degraded the hydrogel structure, resulting in a high initial release of lutein. DSC and FTIR results showed that lutein nanoparticles were mainly physically trapped in the hydrogel network structure. Lutein nanoparticles and excessive Ca²⁺ affected the stability of cross-linked ionic bonds in the hydrogel, thereby reducing its thermodynamic stability.

Emulsion, hydrogel and emulgel systems and novel applications in cannabinoid delivery: a review

Emulsions, hydrogels and emulgels have attracted a high interest as tools for the delivery of poorly soluble hydrophobic nutraceuticals by enhancing their stability and bioavailability. This review provides an overview of these delivery systems, their unique qualities and their interactions with the human gastrointestinal system. The modulation of the various delivery systems to enhance the bioavailability and modify the release profile of bioactive encapsulates is highlighted. The application of the delivery systems in the delivery of cannabinoids is also discussed. With the recent increase of cannabis legalization across North America, there is much interest in developing cannabis edibles which can provide a consistent dose of cannabinoids per portion with a rapid time of onset. Indeed, the long time of onset of psychoactive effects and varied metabolic responses to these products result in a high risk of severe intoxication due to overconsumption. Sophisticated emulsion or hydrogel-based delivery systems are one potential tool to achieve this goal. To date, there is a lack of evidence linking specific classes of delivery systems with their pharmacokinetic profiles in humans. More research is needed to directly compare different classes of delivery systems for the gastrointestinal delivery of cannabinoids.

Resveratrol loaded Pickering emulsions stabilized by OSA modified rice starch granules

Resveratrol is a photosensitive, bioactive molecule which has received increasing research interest during the past decade for its antioxidant properties. However, it has low solubility in water or common triglyceride oils. Resveratrol solubilization in oil can only be achieved in essential oils, such as flavour oils, but the stability of emulsions produced with this type of oils is low as they are prone to creaming phenomena and Oswald ripening. In this study, resveratrol was first dissolved in orange oil which was mixed into a medium-chain triglyceride (Miglyol) at different ratios and used as the internal phase of oil-in-water emulsions (O/W). The emulsions were stabilized by octenyl succinic anhydride (OSA) modified rice starch granules using two different ratios of starch particle:oil to study the influence of interfacial coverage on the final emulsion droplet size and emulsion stability. The results of this study indicated that stable Pickering emulsions could be prepared using OSA-modified rice starch granules even at partial coverage conditions. Emulsions prepared at an oil fraction of 0.5 using 30% v/v mixture of orange oil in Miglyol as the dispersed phase seemed to be an appropriate resveratrol carrier system, obtaining encapsulation efficiency values close to 90% which results in emulsions with a resveratrol concentration of 8.45 mg/L. Hence, the emulsions prepared are suitable for food fortification applications.

Effect of soybean oil content on textural, rheological, and microstructural properties of WBAXs-SPI emulsion-filled gels

This study aimed to prepare wheat bran arabinoxylans-soy protein isolate (WBAXs-SPI) emulsion-filled gels with different oil contents and investigate their rheological, textural, water-holding capacity (WHC), and microstructural properties. The rheological analysis results showed that the maximum correlation interaction occurs when the soybean oil concentration was 10%, and the elastic modulus (G') reaches the highest value of 13,562 Pa. Interestingly, the WHC and texture change trend of WBAXs-SPI emulsion-filled gel were consistent with rheology. Meanwhile, confocal laser scanning microscopy (CLSM) observation indicated that the emulsion-filled gels formed an interpenetrating polysaccharide-protein complex network system. Therefore, the filling emulsion performance could be adjusted by changing the concentration of oil droplets as the active filler. This provides the possibility of developing new food materials encapsulating fat-soluble substances with a low oil rate and more stable structure.