Radio-frequency treatment for stabilization of wheat germ: Storage stability and physicochemical properties

Effect of superheated steam treatment on enzyme inactivation, morphostructural, physicochemical and digestion properties of sand rice (Agriophyllum squarrosum) flour

The lipase (LA) and peroxidase (POD) activities, as well as morphological structure, physicochemical and digestion properties of sand rice flour (SRF) treated with superheated steam (SS), were investigated. SS treatment at 165 °C completely deactivated LA and resulted in a 98% deactivation of POD activities in SRF. This treatment also intensified gelatinization, induced noticeable color alterations, and decreased pasting viscosities. Furthermore, there was a moderate reduction in crystal structure, lamellar structure, and short-range ordered structure, with a pronounced reduction at temperatures exceeding 170 °C. These alterations significantly impacted SRF digestibility, leading to increased levels of rapidly digestible starch (RDS) and resistant starch (RS), with the highest RS content achieved at 165 °C. The effectiveness of SS treatment depends on temperature, with 165 °C being able to stabilize SRF with moderate changes in color and structure. These findings will provide a scientific foundation for SS applicated in SRF stabilization and modification.

Hot air-assisted radio frequency drying of corn kernels: the effect on structure and functionality properties of corn starch

Hot air (HA) drying caused quality damage of grains with long treatment time. Radio frequency (RF) heating as an emerging technology was applied to improve drying quality of cereals effectively. The effects of HA-RF drying (50 °C, 70 °C, 90 °C) of corn kernels on the morphology, structure, and physicochemical properties of starch were investigated and compared with HA drying. The surface of treated starch became rough, along with fragments and pores. Drying treatments increased the amylose content from 10.59 % to 23.88 % and the residual protein content of starch from 0.58 % to 1.23 %, and reduced the crystallinity from 31.95 % to 17.15 % and short-range order structures of starch from 0.918 to 0.868. The change of structures in turn resulted in the increase of pasting viscosity, gelatinization temperature, storage modulus and loss modulus. Furthermore, the HA-RF dried starch displayed stronger thermal stability, higher gelatinization degree and better gelation properties than the HA-treated starch at the same temperature. The data proved that the synergistic effects of HA and RF were more effective in modulating the starch structure and improving the functional characteristics of corn starch. This paper would like to provide potential reference for better application of HA-RF technologies to corn.

Influences of emerging drying technologies on rice quality

Rice is an important staple food in the world. Drying is an important step in the post-harvest handling of rice and can influence rice qualities and thus play a key role in determining rice commercial and nutritional value. In rice processing, traditional drying methods may lead to longer drying times, greater energy consumption, and unintended quality losses. Thus, it is imperative to improve the physical, chemical, and milling properties of rice while preserving its nutritional value, flavor, and appearance as much as possible. Additionally, it is necessary to increase the efficiency with which heat energy is utilized during the thermal processing of freshly harvested paddy. Moreover, this review provides insights into the current application status of six different innovative drying technologies such as radio frequency (RF) drying, microwave (MW) drying, infrared (IR) drying, vacuum drying (VD), superheated steam (SHS) drying, fluidized bed (FB) drying along with their effect on the quality of rice such as color, flavor, crack ratio, microstructure and morphology, bioactive components and antioxidant activity as well asstarch content and glycemic index. Dielectric methods of drying due to volumetric heating results in enhanced drying rate, improved heating uniformity, reduced crack ratio, increased head rice yield and better maintain taste value of paddy grains. These novel emerging drying techniques increased the interactions between hydrated proteins and swollen starch granules, resulting in enhanced viscosity of rice flour and promoted starch gelatinization and enhanced antioxidant activity which is helpful to produce functional rice. Moreover, this review not only highlights the existing challenges posed by these innovative thermal technologies but also presents potential solutions. Additionally, the combination of these technologies to optimize operating conditions can further boost their effectiveness in enhancing the drying process. Nevertheless, future studies are essential to gain a deeper understanding of the mechanism of quality changes induced by emerging processing technologies. This knowledge will help expand the application of these techniques in the rice processing industry.

Low temperature desolventization: effect on physico-chemical, functional and structural properties of rice bran protein

De-oiled rice bran is a good source of high-quality protein; however, the current practice of desolventization at high temperature (110-120 °C) denatures the protein, making its extraction difficult and uneconomical. The present study aims to investigate the effect of low temperature desolventization of de-oiled rice bran (LTDRB) on extraction, yield, and purity of protein and its comparison with protein obtained from high temperature desolventized de-oiled rice bran (HTDRB). The optimal conditions for preparation of protein from LTDRB were: extraction pH 11.00, extraction duration 52 min, and extraction temperature 58 °C resulting in an extraction efficiency, yield, and purity of 54.0, 7.23, and 78.70%, respectively. The LTDRB showed a positive impact on the color, solubility, foaming capacity and stability of protein whereas the absorption and emulsification properties were better for HTDRB protein. Significant decrease in enthalpy (ΔH) for denaturation was observed for LTDRB protein as compared to HTDRB protein. Scanning electron microscopy analysis revealed that HTDRB protein was more compact than LTDRB protein. LTDRB protein had smaller particle size distribution than HTDRB. Study suggested that low temperature desolventization can result in higher protein extraction with better physico-chemical, structural, and functional properties of protein obtained from DRB.

Evaluation of Lipidomics Profile of Quinoa Flour and Changes during Storage Based on Ultra Performance Liquid Chromatography Coupled with Quadrupole Exactive Orbitrap Mass Spectrometry

Although quinoa is nutritious, its high fat content and lipase activity make it easily oxidized during storage. Meanwhile, quinoa's lipid composition and changes during storage are still unknown. Therefore, we stored fresh quinoa flour at low temperature and low humidity (LL), normal temperature and normal humidity (NN), and high temperature and high humidity (HH) conditions for 120 days to assess its oxidative stability and to monitor the changes in lipid composition. Herein, the contents of fatty acids, the peroxide values, the malondialdehyde values, and the lipase activity in quinoa flour during storage are determined to evaluate its oxidation stability. At LL and NN conditions, the contents of fatty acids, the peroxide values, the malondialdehyde values, and the lipase activity changed slowly. They were 3 (LL) and 5 times (NN), 2.7 (LL) and 4.7 times (NN), 1.4 (LL) and 2.3 times (NN), and 1.5 (LL) and 1.6 times (NN) the initial content at storage up to 120 d. However, with the prolongation of storage time under HH conditions, they all increased significantly to 8, 6.6, 3, and 2 times the original content. Moreover, during the storage of quinoa under LL, NN, and HH conditions for 120 days, we continuously monitored the lipid composition of quinoa grains with UPLC-Q-Exactive Orbitrap MS/MS. We identified a total of 14 subclasses of 229 lipids, including 90 significantly different lipid species. PCA and PLS-DA showed that quinoa lipids in HH conditions changed significantly with prolonged storage; among these, the TG and DG classes were the most susceptible to oxidation, which could distinguish fresh quinoa from oxidized quinoa. Simultaneously, we also found that lipase activity has a significant impact on lipid metabolism through correlation analysis, which also indicates that enzyme inactivation treatment can slow down lipid hydrolysis and oxidation during storage. To explore the mechanism of these changes, we also identified twelve important lipid metabolism pathways during quinoa storage. In conclusion, our study advances knowledge of the storage stability and lipid oxidation mechanisms of quinoa and provides a theoretical basis for setting the shelf life of quinoa.

Trends in the Use of Lipases: A Systematic Review and Bibliometric Analysis

Scientific mapping using bibliometric data network analysis was applied to analyze research works related to lipases and their industrial applications, evaluating the current state of research, challenges, and opportunities in the use of these biocatalysts, based on the evaluation of a large number of publications on the topic, allowing a comprehensive systematic data analysis, which had not yet been conducted in relation to studies specifically covering lipases and their industrial applications. Thus, studies involving lipase enzymes published from 2018 to 2022 were accessed from the Web of Science database. The extracted records result in the analysis of terms of bibliographic compatibility among the articles, co-occurrence of keywords, and co-citation of journals using the VOSviewer algorithm in the construction of bibliometric maps. This systematic review analysis of 357 documents, including original and review articles, revealed studies inspired by lipase enzymes in the research period, showing that the development of research, together with different areas of knowledge, presents good results related to the applications of lipases, due to information synchronization. Furthermore, this review showed the main challenges in lipase applications regarding increased production and operational stability; establishing well-defined evaluation criteria, such as cultivation conditions, activity, biocatalyst stability, type of support and reactor; thermodynamic studies; reuse cycles; and it can assist in defining goals for the development of successful large-scale applications, showing several points for improvement of future studies on lipase enzymes.

Relevance of the air-water interfacial and foaming properties of (modified) wheat proteins for food systems

A shift from animal protein- to plant protein-based foods is crucial in transitioning toward a more sustainable global food system. Among food products typically stabilized by animal proteins, food foams represent a major category. Wheat proteins are ubiquitous and structurally diverse, which offers opportunities for exploiting them for food foam and air-water interface stabilization. Notably, they are often classified into those that are soluble in aqueous systems (albumins and globulins) and those that are not (gliadins and glutenins). However, gliadins are at least to an extent water extractable and thus surface active. We here provide a comprehensive overview of studies investigating the air-water interfacial and foaming properties of the different wheat protein fractions. Characteristics in model systems are related to the functional role that wheat proteins play in gas cell stabilization in existing wheat-based foods (bread dough, cake batter, and beer foam). Still, to further extend the applicability of wheat proteins, and particularly the poorly soluble glutenins, to other food foams, their modification is required. Different physical, (bio)chemical, and other modification strategies that have been utilized to alter the solubility and therefore the air-water interfacial and foaming properties of the gluten protein fraction are critically reviewed. Such approaches may open up new opportunities for the application of (modified) gluten proteins in other food products, such as plant-based meringues, whippable drinks, or ice cream. In each section, important knowledge gaps are highlighted and perspectives for research efforts that could lead to the rational design of wheat protein systems with enhanced functionality and overall an increased applicability in food industry are proposed.

Roles of physical fields in the extraction of pectin from plant food wastes and byproducts: A systematic review

Pectin is a naturally occurring hydrocolloid found in the cell wall and middle lamella of many plants and has numerous functional applications in food and other related industries. The type of extraction methods used in production has a strong influence on the structural or physicochemical properties of the resultant pectin and the potential application or market value of the produced pectin. Many conventional extraction methods are well-established and commercially well adopted. However, the increased demand for pectin due to limitations of the existing methods in terms of efficiency and influence on end product quality has been renewed in developing novel techniques or procedures that help to alleviate these problems. In this review paper, a series of strategies involving the application of physical fields, such as acoustic, electromagnetic, electric and mechanical one, are reviewed for potential opportunities to improve the yield and quality attributes of pectin extracted from plant food wastes and byproducts. The extraction mechanism, processing equipment, key operating parameters as well as advantages and disadvantages of each method are systematically reviewed, and findings and conclusions on the potential applications of each method are described. Moreover, the challenges and future directions of physical field assisted extraction (PFAE) of pectin are also discussed to facilitate a better understanding of the complex mechanism in PFAE and optimizing operational parameters. This review may also provide specific theoretical information and practical applications to improve the design and scale up PFAE of pectin.

Thermal Inactivation Kinetics and Radio Frequency Control of Aspergillus in Almond Kernels

Mold infections in almonds are a safety issue during post-harvest, storage and consumption, leading to health problems for consumers and causing economic losses. The aim of this study was to isolate mold from infected almond kernels and identify it by whole genome sequence (WGS). Then, the more heat resistant mold was selected and the thermal inactivation kinetics of this mold influenced by temperature and water activity (a_w) was developed. Hot air-assisted radio frequency (RF) heating was used to validate pasteurization efficacy based on the thermal inactivation kinetics of this target mold. The results showed that the two types of molds were Penicillium and Aspergillus identified by WGS. The selected Aspergillus had higher heat resistance than the Penicillium in the almond kernels. Inactivation data for the target Aspergillus fitted the Weibull model better than the first-order kinetic model. The population changes of the target Aspergillus under the given conditions could be predicted from Mafart’s modified Bigelow model. The RF treatment was effectively used for inactivating Aspergillus in almond kernels based on Mafart’s modified Bigelow model and the cumulative lethal time model.

Production of rice bran oil (Oryza sativa L.) microparticles by spray drying taking advantage of the technological properties of cereal co-products

AIM

To evaluate the effects of the use of rice co-products (flour and protein) on the encapsulation process and on the stability of rice bran oil.

METHODS

The stability of the emulsions was evaluated by dynamic turbidimetry, zeta potential, and creaming index. Efficiency parameters, particle size, and densities were investigated in the particles. The study of oxidative stability was carried out by the determination of peroxides and volatiles (60 °C for 8 weeks).

RESULTS

Rice bran oil presented 1.75% ɣ-oryzanol. AG/RP (10% of rice protein): no phase separation after 24 h, higher zeta potential (- 29.09 mV ±0.67), encapsulation efficiency (73.90% ± 0.22) and real density (1.27 g/cm^-3), and smaller particle size (8.27 µm ± 0.13). Lower peroxide (AG/RF/RP) and hexanal (AG/RF) levels were associated with the use of rice flour.

CONCLUSION

The co-products improve the emulsion characteristics, particle properties and stability of the encapsulated oil.

Effects of radio frequency heating on microbial populations and physicochemical properties of buckwheat

Microbial contamination is a persistent problem for grain industry. Many studies have shown that radio frequency (RF) heating can effectively reduce pathogens populations in low moisture foods, but there is a lack on the efficacy to decontaminate natural microbiome. The main objectives of this study were to investigate the effects of different RF heating conditions on natural microbial populations and physicochemical properties of buckwheat. In this study, 30 buckwheat samples collected from 10 different Provinces in China were analyzed for their microbial loads, and the samples with the highest microbial populations were used for further study to select the suitable RF heating conditions. The results showed that microbial loads in tested buckwheat kernels were in the range of 3.4-6.2 log CFU/g. Samples from Shanxi (SX-3) had significantly higher microbial counts than other samples. The selected four temperature-time combinations: 75 °C-20 min, 80 °C-10 min, 85 °C-5 min, and 90 °C-0 min of RF heating could reduce microbial counts to <3.0 log CFU/g in buckwheat kernels at 16.5% w.b. moisture content. Furthermore, the reduction populations of the inoculated pathogens (Salmonella Typhimurium, Escherichia coli, Cronobacter sakazakii, and Bacillus cereus) reached 4.0 log CFU/g under the above conditions, and almost 5.0 log CFU/g especially at high temperature-short holding time combinations (85 °C-5 min and 90 °C-0 min). Besides, physicochemical properties evaluation also showed the insignificant color changes and nutrients loss after RF treatment at 90 °C-0 min. Therefore, the RF heating at 90 °C-0 min holds greater potential than the other lower temperature-longer holding time combinations for applications in buckwheat pasteurization.

A comprehensive review of cereal germ and its lipids: Chemical composition, multi-objective process and functional application

Cereal germ (CG), a by-product of grain milling, has drawn much attention in the food industry because of its nutritional and functional advantages. Nowadays, the utilization of cereal germ from animal feeds to foodstuff is a popular trend. CGs have high content of polyunsaturated fatty acids in their lipids (43.9-64.9% of total fatty acids), but they are also induced to oxidative rancidity under the catalytic reaction of enzymes. Chemical and structural properties of lipids in CGs are affected by different treatments. Thermal and non-thermal effects prevent lipid oxidation or promote lipid combination with starch/protein in CG. Thus, the functional properties and final quality of CG are directly changed. In this review, the chemical composition and application of CGs especially the endogenous lipids are summarized and the effects of various processes on CG lipids/matrices are discussed for CG future development.

Technologies for disinfection of food grains: Advances and way forward

Growing demand from the consumers for minimally processed and high-quality food products has raised the scientific quest for foods with improved natural flavours in conjunction with a restricted supplement of additives. In this context, achieving quality and safe food grains and the identification of suitable processing and disinfection technologies have also become the key issues. Microbial contamination is one of the major reasons responsible for the spoilage of food grains. Various sources of contamination such as air and water (both contaminated with dust and dirt), animals (insects, birds, rodents), environmental conditions (rainfall, drought, temperature), unhygienic handling, harvesting, processing equipment and improper storage conditions are responsible for the microbial spoilage of food grains. In order to maintain the food grains safe and un-contaminated, several food processing technologies have been explored and implemented, with the ultimate purpose of maintaining the safety, freshness and nutritional attributes of the food products. Among these technologies, microwave, radiofrequency, infrared, ohmic heating, novel drying methods along with non-thermal methods such as cold plasma, irradiation, ozonation and nanotechnology have attracted much attention because of considerable reduction in the overall processing time with minimum energy consumption. This review aims to discuss the advances involving the said technologies for controlling the microbial contamination of food grains in accordance with their inactivation. Current research status of the thermal and non-thermal emerging technologies for the preservation of food grains as well as perspectives for further research in this area are also elaborated in detail.