Properties of starch nanoparticle obtained by ultrasonication and high pressure homogenization for developing carotenoids-enriched powder and Pickering nanoemulsion

Shaping the bioactive potential, health-promoting properties, and bioavailability of o/w nanoemulsions by modulating the dose of a carotenoid preparation isolated from Calendula officinalis L

The use of nanotechnology in food production (in particular protein base nanoemulsion) is a solution that is gaining popularity, which allows to design of smart food with targeted health-promoting properties. This study aimed to assess the impact of the dose of the phytochemical extract (1%; 3%; 5% w/w) comprising isolated lipophilic compounds from Calendula officinalis L. on selected physicochemical properties of the emulsion, antioxidant, antidiabetic and antiaging effects, and its impact on carotenoids content and their in vitro bioavailability. The results showed that the use of a 3% extract dosage appears to be optimal for obtaining a nanoemulsion. This variant was characterized by the highest antidiabetic activity and there was no overloading of the nanostructure. Additionally, the use of a pea protein - lipophilic compounds - sunflower/hemp oil matrix to create nanoforms seems to be a promising solution in the context of pro-health properties and bioavailability of bioactive compounds.

Oil/water interface behavior of hesperidin methylchalcone and its application in nano-emulsions

The behavior of hesperidin methylchalcone (HMC) at the oil/water interface was examined through experimental and molecular simulation methods, and a nano-emulsions based on HMC was subsequently fabricated. The findings indicated that HMC spontaneously aggregated at the oil-water interface, leading to a reduction in interfacial tension and an increase in interfacial thickness. Furthermore, its glycoside and benzene ring showed tendencies to interact with water and medium-chain triglyceride, respectively. The HMC addition amount (w), homogenization times (n) and homogenization pressure (p) significantly influenced the formation of the nano-emulsions. The nano-emulsion with an oil-droplet size of 277.26 ± 13.62 nm was obtained at w = 1.0 %, p = 200 bar, and n = 6. When compared to the Tween 20 nano-emulsion, the HMC nano-emulsion demonstrated superior storage stability, antioxidant activity, and lutein bioaccessibility. It could achieve the slow release of HMC. These findings not only broaden the application range of HMC but also contribute to the advancement of functional nano-emulsions.

Modified Amber Particles as a Stabilizer to Construct Oil-in-Water Pickering Emulsions for Improved Thermal Stability of Acorus tatarinowii Essential Oil

Lingzhu Pulvis is a classic formulation for treating febrile convulsions in children. However, Acorus tatarinowii essential oil (AT-EO) in this prescription is prone to volatilization and oxidation, compromising the efficacy and quality control of this formulation. Herein, based on the concept of "combination of medicine and adjuvant", Pickering emulsion technology was applied to enhance the stability of AT-EO using modified amber as a stabilizer. Amber was a resinous medicinal powder in Lingzhu Pulvis and was modified into a suitable stabilizer for Pickering emulsion through surface modification. A thermal stability study indicated that Pickering emulsion, stabilized by modified amber, exhibited a higher retention rate of AT-EO and lower levels of peroxide value and malondialdehyde content compared to those of the pure AT-EO group after heat treatment at 40 °C for 1, 3, and 8 h. Additionally, component analysis in content and composition revealed that the volatile components of AT-EO in the Pickering emulsion were more stable during the thermal treatment process. This study convincingly illustrates the potential of a Pickering emulsion stabilized with modified medicinal powders to improve the thermal stability of the essential oil.

Effect of dynamic high-pressure treatments on the multi-level structure of starch macromolecule and their techno-functional properties: A review

Over the past decades, dynamic high-pressure treatment (DHPT) executed by high-pressure homogenization (HPH) or microfluidization (DHPM) technology has received humongous research attention for starch macromolecule modification. However, the studies on starch multi-level structure alterations by DHPT have received inadequate attention. Furthermore, no review comprehensively covers all aspects of DHPT, explicitly addressing the combined effects of both technologies (HPH or DHPM) on starch's structural and functional characteristics. Hence, this review focused on recent advancements concerning the influences of DHPT on the starch multi-level structure and techno-functional properties. Intense mechanical actions induced by DHPT, such as high shear and impact forces, hydrodynamic cavitation, instantaneous pressure drops, and turbulence, altered the multi-level structure of starch for a short duration. The DHPT reduces the starch molecular weight and degree of branching, destroys short-range ordered and long-range crystalline structure, and degrades lamellar structure, resulting in partial gelatinization of starch granules. These structural changes influenced their techno-functional properties like swelling power and solubility, freeze-thaw stability, emulsifying properties, retrogradation rate, thermal properties, rheological and pasting, and digestibility. Processing conditions such as pressure level, the number of passes, inlet temperature, chamber geometry used, starch types, and their concentration may influence the above changes. Moreover, dynamic high-pressure treatment could form starch-fatty acids/polyphenol complexes. Finally, we discuss the food system applications of DHPT-treated starches and flours, and some limitations.

Synthesis, optimization, and characterization of precipitation derived starch nanoparticles from guinea seeds

Guinea starch nanoparticles (GS-SNP) were developed using ultrasound and nanoprecipitation techniques. The physicochemical, thermal, structural, morphological, pasting, and rheological properties of GS-SNP were examined and compared with native starch. The particle size of GS-SNP was 391.50-206.00 nm, with a PDI of 0.35-0.23 and a zeta potential of -37.5 to -13 mV. The amylose content of GS-SNP increased with a decrease in relative crystallinity, and a VH-type crystalline structure was observed. The GS-SNP were in round shape with some self-aggregated granules. The water and oil absorption capacity, solubility, and gelatinization temperature of GS-SNP increased, but the swelling power was restricted. The viscosity of the GS-SNP dispersion remained almost constant throughout the heating but slightly increased after cooling. A higher degree of shear thinning was observed due to a fluid-like gel network and weak gel structure. The optimum conditions were: 50 % amplitude, 30 min time, and a starch to ethanol ratio (1:4) with 85 % maximum desirability. Overall, the findings suggest that GS-SNP have promising potential for application in a liquid system where viscosity of the system cannot be significantly influenced by temperature.

Starch-based particles as stabilizers for Pickering emulsions: modification, characteristics, stabilization, and applications

The potential utilization of starch as a particle-based emulsifier in the preparation of Pickering emulsions is gaining interest within the food industry. Starch is an affordable and abundant functional ingredient, which makes it an excellent candidate for the stabilization of Pickering emulsions. This review article focuses on the formation, stabilization, and properties of Pickering emulsions formulated using starch-based particles and their derivatives. First, methods of isolating and modifying starch-based particles are highlighted. The key parameters governing the properties of starch-stabilized Pickering emulsions are then discussed, including the concentration, size, morphology, charge, and wettability of the starch-based particles, as well as the type and size of the oil droplets. The physicochemical mechanisms underlying the ability of starch-based particles to form and stabilize Pickering emulsions are also discussed. Starch-based Pickering emulsions tend to be more resistant to coalescence than conventional emulsions, which is useful for some food applications. Potential applications of starch-stabilized Pickering emulsions are reviewed, as well as recent studies on their gastrointestinal fate. The information provided may stimulate the utilization of starch-based Pickering emulsions in food and other industries.

Characterization of coconut milk waste nanocellulose based curcumin-enriched Pickering nanoemulsion and its application in a blended beverage of defatted coconut milk and pineapple juice

In this study, we aimed to develop a blended beverage enriched with curcumin. The curcumin was incorporated within a Pickering nanoemulsion that was stabilized with nanocellulose. The nanocellulose was synthesized from coconut milk waste residue using 38 %-42 % sulfuric acid (AC) and 5 and 10 min ultrasound (UL) separately and in combination (ACU). While combined treatment showed an increase in particle size with ultrasonication time, PDI was observed to decrease. ACU with 10 min ultrasonication was further used at 0.05 %, 0.1 %, 0.2 %, and 0.3 % for stabilization of curcumin enriched Pickering nanoemulsion. The curcumin in Pickering nanoemulsion fabricated with 0.1 % of nanocellulose with an average particle size and PDI value of 259.6 nm and 0.284, respectively was found to be the most stable as compared to other Pickering nanoemulsions at different pH levels and temperatures. RP-HPLC analysis revealed that with 0.1 % of nanocellulose, the Pickering nanoemulsion was most stable at 2 pH and 63 °C temperatures. The in vitro release of curcumin from Pickering nanoemulsion added to a blended beverage in intestinal phase was 51.58 %, which was higher than the stomach phase (38.19 %). The outcomes clearly showed Pickering nanoemulsion to be a promising carrier for curcumin encapsulation in beverage.

Preparation and characterization of potato starch-based composite films reinforced by modified banana fibers and its application in packaging of grapes

The current study focuses on the preparation and characterization of potato starch-based biocomposite films by reinforcing them with banana fiber. The banana fibers were modified using ultrasonication and cellulase enzyme, individually and in combination. Both native and modified banana fibers underwent physical, morphological, FTIR, and crystallinity analyses. The resulting biocomposite films, created by incorporating native and treated banana fibers, were then evaluated for their mechanical, thermal, barrier, and biodegradable properties. The findings indicated that combining ultrasound with enzyme treatment of banana fibers in the potato starch matrix led to a substantial reduction in water-sorption and water-vapor permeability (0.156 g mm m-2 h-1 kPa-1) of the packaging films. Additionally, the mechanical properties (5.02 MPa-Tensile strength, 4.27 MPa-Sealability) of the films significantly improved with the inclusion of modified banana fibers. FTIR analysis revealed similar spectra for all modified samples, along with enhanced crystallinity. Moreover, the thermal stability of the developed films was enhanced by the incorporation of modified banana fibers. Scanning electron microscopy showed that the modified fibers exhibited smooth surfaces and an even distribution of spaces compared with the native fibers. The biocomposite films demonstrated biodegradation within 42 days. Furthermore, the packaging application was tested with grapes, which showed that the films could maintain storability for up to 8 days. Overall, these results suggest a promising eco-friendly method for producing packaging films with biocompatible, biodegradable, and non-toxic properties.

Enhancing starch nanocrystal production and evaluating their efficacy as fat replacers in ice cream: Investigating the influence of high pressure and ultrasonication

A preparation method involving the combination of high-pressure homogenization and ultrasound (HPH-US) techniques was employed to produce starch nanocrystals (NCs) from three botanical starch sources: chestnut, corn starch, and potato starch. The optimal conditions, determined using response surface methodology, consisted of a homogenization pressure of 60 MPa and ultrasound at 280 W for 30 min. The utilization of dynamic light scattering (DLS) and transmission electron microscopy (TEM) unveiled that the resulting starch particles exhibited nanometric dimensions ranging from 135.36 to 203.47 nm. The mechanical forces generated by the HPH-US treatment significantly enhanced the physicochemical properties of the starch NCs, leading to a partial disruption of the crystalline structure. Moreover, the potential application of the synthesized starch NCs as fat replacers (FRs) was investigated. As the degree of substitution increased, notable improvements were observed in the hardness and viscosity of ice cream, accompanied by a reduction in the melting rate. The overall sensory evaluation indicated that corn starch NCs held substantial promise as a viable alternative FR for enhancing the quality of ice cream.

Fabrication of carboxymethyl starch/xanthan gum combinations Pickering emulsion for protection and sustained release of pterostilbene

Carboxymethyl starch (CMS)/xanthan gum (XG) combinations with different ratios (CMS/XG: 1/1, 3/1, 5/1, 7/1, 9/1, w/w) were used as Pickering emulsion delivery systems to encapsulate pterostilbene (PTS) to improve its stability. The results showed that the Pickering emulsion prepared using CMS/XG combinations could effectively encapsulate PTS. When the mass ratio of CMS to XG was 1:1, the encapsulation efficiency reached 91.20 %. The spherical particles in the PTS emulsion were dissociated and homogenous. The results of backscattered light experiments and storage stability studies showed that the PTS emulsion system prepared using CMS/XG was uniform and stable, with no obvious phase separation or emulsion droplet coalescence. With an increase in the mass ratio of XG, the water distribution in the emulsion became more evenly distributed, and the aggregation of droplets was reduced. The PTS emulsion prepared using CMS/XG improved the storage retention percentage of PTS. The cumulative release of PTS in the simulated gastric fluid was significantly lower than that in simulated intestinal fluid. The Pickering emulsion prepared using CMS/XG combinations can be used as a delivery system for functional foods and help to develop an efficient and reliable release system for hydrophobic bioactive substances.

The mechanism, biopolymers and active compounds for the production of nanoparticles by anti-solvent precipitation: A review

The anti-solvent precipitation method has been investigated to produce biopolymeric nanoparticles in recent years. Biopolymeric nanoparticles have better water solubility and stability when compared with unmodified biopolymers. This review article focuses on the analysis of the state of the art available in the last ten years about the production mechanism and biopolymer type, as well as the used of these nanomaterials to encapsulate biological compounds, and the potential applications of biopolymeric nanoparticles in food sector. The revised literature revealed the importance to understand the anti-solvent precipitation mechanism since biopolymer and solvent types, as well as anti-solvent and surfactants used, can alter the biopolymeric nanoparticles properties. In general, these nanoparticles have been produced using polysaccharides and proteins as biopolymers, especially starch, chitosan and zein. Finally, it was identified that those biopolymers produced by anti-solvent precipitation were used to stabilize essential oils, plant extracts, pigments, and nutraceutical compounds, promoting their application in functional foods.

Development, application and future trends of starch-based delivery systems for nutraceuticals: A review

As a natural biopolymer, starch is ideally adapted as an encapsulant material for nutraceutical delivery systems due to its unique nature of extensive sources, versatility and high biocompatibility. This review offers an outline of recent advances in the development of starch-based delivery systems. The structure and functional properties of starch in encapsulating and delivering bioactive ingredients are first introduced. Structural modification of starch improves the functionalities and extends the applications of starch in novel delivery systems. Then, various nutraceutical delivery systems are systematically summarized, which include porous starch, starch particle, amylose inclusion complex, cyclodextrin, gel, edible film and emulsion. Next, the delivery process of nutraceuticals is discussed in two parts: digestion and release. Intestinal digestion plays an important role during the whole digestion process of starch-based delivery systems. Moreover, controlled release of bioactives can be achieved by porous starch, starch-bioactive complexation and core-shell structure. Finally, the challenges of the existing starch-based delivery systems are deliberated, and the directions for future research are pointed out. Composite delivery carriers, co-delivery, intelligent delivery, delivery in real food systems, and reuse of agricultural wastes may be the research trends for starch-based delivery systems in the future.

Starch physical treatment, emulsion formation, stability, and their applications

Pickering emulsions are increasingly preferred over typical surfactant-based emulsions due to several advantages, such as lower emulsifier usage, simplicity, biocompatibility, and safety. These types of emulsions are stabilized using solid particles, which produce a thick layer at the oil-water interface preventing droplets from aggregating. Starch nano-particles (SNPs) have received considerable attention as natural alternatives to synthetic stabilizers due to their unique properties. Physical formulation processes are currently preferred for SNP production since they are environmentally friendly procedures that do not require the use of chemical reagents. This review provides a thorough overview in a critical perspective of the physical processes to produce starch nano-particles used as Pickering emulsion stabilizers, fabricated by a 2-step process. Specifically, the reviewed physical approaches for nano-starch preparation include high hydrostatic pressure, high pressure homogenization, ultrasonication, milling and antisolvent precipitation. All the essential parameters used to evaluate the effectiveness of particles in stabilizing these systems are also presented in detail, including the hydrophobicity, size, and content of starch particles. Finally, this review provides the basis for future research focusing on physical nano-starch production, to ensure the widespread use of these natural stabilizers in the ever-evolving field of food technology.

A Comprehensive Study on Starch Nanoparticle Potential as a Reinforcing Material in Bioplastic

Starch can be found in the stems, roots, fruits, and seeds of plants such as sweet potato, cassava, corn, potato, and many more. In addition to its original form, starch can be modified by reducing its size. Starch nanoparticles have a small size and large active surface area, making them suitable for use as fillers or as a reinforcing material in bioplastics. The aim of reinforcing material is to improve the characteristics of bioplastics. This literature study aims to provide in-depth information on the potential use of starch nanoparticles as a reinforcing material in bioplastic packaging. This study also reviews starch size reduction methods including acid hydrolysis, nanoprecipitation, milling, and others; characteristics of the nano-starch particle; and methods to produce bioplastic and its characteristics. The use of starch nanoparticles as a reinforcing material can increase tensile strength, reduce water vapor and oxygen permeability, and increase the biodegradability of bioplastics. However, the use of starch nanoparticles as a reinforcing material for bioplastic packaging still encounters obstacles in its commercialization efforts, due to high production costs and ineffectiveness.

Recent Trends in the Preparation of Nano-Starch Particles

Starch is affected by several limitations, e.g., retro-gradation, high viscosity even at low concentrations, handling issues, poor freeze-thaw stability, low process tolerance, and gel opacity. In this context, physical, chemical, and enzymatic methods have been investigated for addressing such limitations or adding new attributes. Thus, the creation of biomaterial-based nanoparticles has sparked curiosity. Because of that, single nucleotide polymorphisms are gaining a lot of interest in food packaging technology. This is due to their ability to increase the mechanical and water vapor resistance of the matrix, as well as hide its re-crystallization during storage in high-humidity atmospheres and enhance the mechanical properties of films when binding in paper machines and paper coating. In medicine, single nucleotide polymorphisms (SNPs) are suitable as carriers in the field of drug delivery for immobilized bioactive or therapeutic agents, as well as wastewater treatments as an alternative to expensive activated carbons. Starch nanoparticle preparations can be performed by hydrolysis via acid hydrolysis of the amorphous part of a starch molecule, the use of enzymes such as pullulanase or isoamylase, or a combination of two regeneration and mechanical treatments with the employment of extrusion, irradiation, ultrasound, or precipitation. The possibility of obtaining cheap and easy-to-use methods for starch and starch derivative nanoparticles is of fundamental importance. Nano-precipitation and ultra-sonication are rather simple and reliable methods for nanoparticle production. The process involves the addition of a diluted starch solution into a non-solvent, and ultra-sonication aims to reduce the size by breaking the covalent bonds in polymeric material due to intense shear forces or mechanical effects associated with the collapsing of micro-bubbles by sound waves. The current study focuses on starch nanoparticle manufacturing, characterization, and emerging applications.

Nanocarriers for Sustainable Active Packaging: An Overview during and Post COVID-19

Lockdown has been installed due to the fast spread of COVID-19, and several challenges have occurred. Active packaging was considered a sustainable option for mitigating risks to food systems during COVID-19. Biopolymeric-based active packaging incorporating the release of active compounds with antimicrobial and antioxidant activity represents an innovative solution for increasing shelf life and maintaining food quality during transportation from producers to consumers. However, food packaging requires certain physical, chemical, and mechanical performances, which biopolymers such as proteins, polysaccharides, and lipids have not satisfied. In addition, active compounds have low stability and can easily burst when added directly into biopolymeric materials. Due to these drawbacks, encapsulation into lipid-based, polymeric-based, and nanoclay-based nanocarriers has currently captured increased interest. Nanocarriers can protect and control the release of active compounds and can enhance the performance of biopolymeric matrices. The aim of this manuscript is to provide an overview regarding the benefits of released active compound-loaded nanocarriers in developing sustainable biopolymeric-based active packaging with antimicrobial and antioxidant properties. Nanocarriers improve physical, chemical, and mechanical properties of the biopolymeric matrix and increase the bioactivity of released active compounds. Furthermore, challenges during the COVID-19 pandemic and a brief post-COVID-19 scenario were also mentioned.

Nanoemulsions as Edible Coatings: A Potential Strategy for Fresh Fruits and Vegetables Preservation

Fresh fruits and vegetables are perishable commodities requiring technologies to extend their postharvest shelf life. Edible coatings have been used as a strategy to preserve fresh fruits and vegetables in addition to cold storage and/or controlled atmosphere. In recent years, nanotechnology has emerged as a new strategy for improving coating properties. Coatings based on plant-source nanoemulsions in general have a better water barrier, and better mechanical, optical, and microstructural properties in comparison with coatings based on conventional emulsions. When antimicrobial and antioxidant compounds are incorporated into the coatings, nanocoatings enable the gradual and controlled release of those compounds over the food storage period better than conventional emulsions, hence increasing their bioactivity, extending shelf life, and improving nutritional produce quality. The main goal of this review is to update the available information on the use of nanoemulsions as coatings for preserving fresh fruits and vegetables, pointing to a prospective view and future applications.