Biophysical characterization of DNA and RNA aptamer interactions with hen egg lysozyme

The Use of Xenonucleic Acids Significantly Reduces the In Vivo Drift of Electrochemical Aptamer-Based Sensors

Electrochemical aptamer-based sensors support the high-frequency, real-time monitoring of molecules-of-interest in vivo. Achieving this requires methods for correcting the sensor drift seen during in vivo placements. While this correction ensures EAB sensor measurements remain accurate, as drift progresses it reduces the signal-to-noise ratio and precision. Here, we show that enzymatic cleavage of the sensor's target-recognizing DNA aptamer is a major source of this signal loss. To demonstrate this, we deployed a tobramycin-detecting EAB sensor analog fabricated with the DNase-resistant "xenonucleic acid" 2'O-methyl-RNA in a live rat. In contrast to the sensor employing the equivalent DNA aptamer, the 2'O-methyl-RNA aptamer sensor lost very little signal and had improved signal-to-noise. We further characterized the EAB sensor drift using unstructured DNA or 2'O-methyl-RNA oligonucleotides. While the two devices drift similarly in vitro in whole blood, the in vivo drift of the 2'O-methyl-RNA-employing device is less compared to the DNA-employing device. Studies of the electron transfer kinetics suggested that the greater drift of the latter sensor arises due to enzymatic DNA degradation. These findings, coupled with advances in the selection of aptamers employing XNA, suggest a means of improving EAB sensor stability when they are used to perform molecular monitoring in the living body.

Are Aptamers Really Promising as Receptors for Analytical Purposes? Insights into Anti-Lysozyme DNA Aptamers through a Multitechnique Study

Aptamers are recognition elements increasingly used for the development of biosensing strategies, especially in the detection of proteins or small molecule targets. Lysozyme, which is recognized as an important biomarker for various diseases and a major allergenic protein found in egg whites, is one of the main analytical targets of aptamer-based biosensors. However, since aptamer-based strategies can be prone to artifacts and data misinterpretation, rigorous strategies for multifaceted characterization of the aptamer-target interaction are needed. In this work, a multitechnique approach has been devised to get further insights into the binding performance of the anti-lysozyme DNA aptamers commonly used in the literature. To study molecular interactions between lysozyme and different anti-lysozyme DNA aptamers, measurements based on a magneto-electrochemical apta-assay, circular dichroism spectroscopy, fluorescence spectroscopy, and asymmetrical flow field-flow fractionation were performed. The reliability and versatility of the approach were proved by investigating a SELEX-selected RNA aptamer reported in the literature, that acts as a positive control. The results confirmed that an interaction in the low micromolar range is present in the investigated binding buffers, and the binding is not associated with a conformational change of either the protein or the DNA aptamer. The similar behavior of the anti-lysozyme DNA aptamers compared to that of randomized sequences and polythymine, used as negative controls, showed nonsequence-specific interactions. This study demonstrates that severe testing of aptamers resulting from SELEX selection is the unique way to push these biorecognition elements toward reliable and reproducible results in the analytical field.

Aptamer-Protein Interactions: From Regulation to Biomolecular Detection

Serving as the basis of cell life, interactions between nucleic acids and proteins play essential roles in fundamental cellular processes. Aptamers are unique single-stranded oligonucleotides generated by in vitro evolution methods, possessing the ability to interact with proteins specifically. Altering the structure of aptamers will largely modulate their interactions with proteins and further affect related cellular behaviors. Recently, with the in-depth research of aptamer-protein interactions, the analytical assays based on their interactions have been widely developed and become a powerful tool for biomolecular detection. There are some insightful reviews on aptamers applied in protein detection, while few systematic discussions are from the perspective of regulating aptamer-protein interactions. Herein, we comprehensively introduce the methods for regulating aptamer-protein interactions and elaborate on the detection techniques for analyzing aptamer-protein interactions. Additionally, this review provides a broad summary of analytical assays based on the regulation of aptamer-protein interactions for detecting biomolecules. Finally, we present our perspectives regarding the opportunities and challenges of analytical assays for biological analysis, aiming to provide guidance for disease mechanism research and drug discovery.

Current and Future Technologies for the Detection of Antibiotic-Resistant Bacteria

Antibiotic resistance is a global public health concern, posing a significant threat to the effectiveness of antibiotics in treating bacterial infections. The accurate and timely detection of antibiotic-resistant bacteria is crucial for implementing appropriate treatment strategies and preventing the spread of resistant strains. This manuscript provides an overview of the current and emerging technologies used for the detection of antibiotic-resistant bacteria. We discuss traditional culture-based methods, molecular techniques, and innovative approaches, highlighting their advantages, limitations, and potential future applications. By understanding the strengths and limitations of these technologies, researchers and healthcare professionals can make informed decisions in combating antibiotic resistance and improving patient outcomes.

Electrostatic-Mediated Binding of DNA to Lysozymes: Evaluation of Aptamer-Based Assays for Highly Positively Charged Targets

Lysozymes are a highly popular protein target for the development of aptamer-based biosensors. Because a lysozyme is a polycation and DNA is a polyanion, it is essential to separate the contribution of nonspecific electrostatic interactions from specific aptamer binding. In this study, various factors affecting the binding of DNA and lysozymes, including the DNA sequence, DNA length, pH, and salt concentration, were explored using fluorescence polarization. We concluded that direct fluorescence polarization and fluorescence intensity changes are unlikely to be directly applicable for aptamer-based biosensors to detect lysozymes because all of the tested DNA sequences showed binding. These fundamental studies confirm the dominant role of electrostatic binding. We further evaluated three other methods, including label-free fluorescent detection using a DNA staining dye, label-free colorimetric detection using gold nanoparticles, and a fluorescent sensor based on the strand displacement reaction. In each case, we focused on a random DNA sequence that is not expected to bind to the lysozyme as an aptamer. Of all the methods, only the strand displacement strategy can be potentially used to evaluate aptamer binding, as the other methods all responded to nonaptamer sequences. This study provides valuable insights for assaying aptamer binding to cationic proteins that can exhibit a nonspecific attraction to DNA.

Characterization of an HNA aptamer suggests a non-canonical G-quadruplex motif

Nucleic acids not only form the basis of heredity, but are increasingly a source of novel nano-structures, -devices and drugs. This has spurred the development of chemically modified alternatives (xeno nucleic acids (XNAs)) comprising chemical configurations not found in nature to extend their chemical and functional scope. XNAs can be evolved into ligands (XNA aptamers) that bind their targets with high affinity and specificity. However, detailed investigations into structural and functional aspects of XNA aptamers have been limited. Here we describe a detailed structure-function analysis of LYS-S8-19, a 1',5'-anhydrohexitol nucleic acid (HNA) aptamer to hen egg-white lysozyme (HEL). Mapping of the aptamer interaction interface with its cognate HEL target antigen revealed interaction epitopes, affinities, kinetics and hot-spots of binding energy similar to protein ligands such as anti-HEL-nanobodies. Truncation analysis and molecular dynamics (MD) simulations suggest that the HNA aptamer core motif folds into a novel and not previously observed HNA tertiary structure, comprising non-canonical hT-hA-hT/hT-hT-hT triplet and hG4-quadruplex structures, consistent with its recognition by two different G4-specific antibodies.

Unravelling the binding mode of a methamphetamine aptamer: a spectroscopic and calorimetric investigation

Nucleic acid aptamers are bio-molecular recognition agents that bind to their targets with high specificity and affinity, and hold promise in a range of biosensor and therapeutic applications. In the case of small molecule targets, their small size and limited number of functional groups constitute challenges for their detection by aptamer-based biosensors because bio-recognition events may both be weak and produce poorly transduced signals. The binding affinity is principally used to characterize aptamer-ligand interactions; however a structural understanding of bio-recognition is arguably more valuable in order to design a strong response in biosensor applications. Using a combination of nuclear magnetic resonance, circular dichroism, and isothermal titration calorimetry, we propose a binding model for a new methamphetamine aptamer and determine the main interactions driving complex formation. These measurements reveal only modest structural changes to the aptamer upon binding and are consistent with a conformational selection binding model. The aptamer-methamphetamine complex formation was observed to be entropically driven, apparently involving hydrophobic and electrostatic interactions. Taken together, our results exemplify a means of elucidating small molecule-aptamer binding interactions, which may be decisive in the development of aptasensors and therapeutics, and may contribute to a deeper understanding of interactions driving aptamer selection.

Systematic Review of Aptamer Sequence Reporting in the Literature Reveals Widespread Unexplained Sequence Alterations

Aptamers have been the subject of more than 144 000 papers to date. However, there has been a growing concern that discrepancies in the reporting of aptamer research limit the reliability of these reagents for research and other applications. These observations noting inconsistencies in the use of our RNA antilysozyme aptamer served as an impetus for our systematic review of the reporting of aptamer sequences in the literature. Our detailed examination of the literature citing the RNA antilysozyme aptamer revealed that 93% of the 61 publications reviewed reported unexplained altered sequences with 96% of those using DNA variants. The 10 most cited aptamers were examined using a standardized methodology in order to categorize the extent to which the sequences themselves and altered sequences were adequately described in the literature. Our review of 780 aptamer publications spanned decades, multiple journals, and research groups and revealed that 41% of the papers reported unexplained sequence alterations or omitted sequences. We identified 10 common categories of sequence alterations including deletions, substitutions, and additions, among others. Overall, our findings can be used as a starting point for building better practices in author submissions and publication standards, elevating the rigor and reproducibility of aptamer research.

Recent Progress in the Identification of Aptamers Against Bacterial Origins and Their Diagnostic Applications

Aptamers have gained an increasing role as the molecular recognition element (MRE) in diagnostic assay development, since their first conception thirty years ago. The process to screen for nucleic acid-based binding elements (aptamers) was first described in 1990 by the Gold Laboratory. In the last three decades, many aptamers have been identified for a wide array of targets. In particular, the number of reports on investigating single-stranded DNA (ssDNA) aptamer applications in biosensing and diagnostic platforms have increased significantly in recent years. This review article summarizes the recent (2015 to 2020) progress of ssDNA aptamer research on bacteria, proteins, and lipids of bacterial origins that have implications for human infections. The basic process of aptamer selection, the principles of aptamer-based biosensors, and future perspectives will also be discussed.

Aptamer binding assays and molecular interaction studies using fluorescence anisotropy - A review

Binding of nucleic acid aptamers to specific targets and detection with fluorescence anisotropy (FA) or fluorescence polarization (FP) take advantage of the complementary features of aptamers and the fluorescence techniques. We review recent advances in affinity binding assays using aptamers and FA/FP, with an emphasis on studies of molecular interactions and identification of binding sites. Aptamers provide several benefits, including the ease of labelling fluorophores on specific sites, binding-induced changes in aptamer structures, hybridization of the aptamers to complementary sequences, changes in molecular volume upon binding of the aptamer to its target, and adsorption of aptamers onto nanomaterials. Some of these benefits have been utilized for FA/FP assays. Once the aptamer binds to its target, the resulting changes in molecular volume (size), structure, local rotation of the fluorophore, and/or the fluorescence lifetime influence changes to the FA/FP values. Measurements of these fluorescence anisotropy/polarization changes have provided insights into the molecular interactions, such as the binding affinity and the site of binding. Studies of molecular interactions conducted in homogeneous solutions, as well as those with separations, e.g., capillary electrophoresis, have been summarized in this review. Studies on mapping the position of binding in aptamers at the single nucleotide level have demonstrated a unique benefit of the FA/FP techniques and pointed to an exciting direction for future research.

Measurements of aptamer-protein binding kinetics using graphene field-effect transistors

Quantifying interactions between biomolecules subject to various environmental conditions is essential for applications such as drug discovery and precision medicine. This paper presents an investigation of the kinetics of environmentally dependent biomolecular binding using an electrolyte-gated graphene field-effect transistor (GFET) nanosensor. In this approach, biomolecular binding occurring on and in the vicinity of a graphene surface induces a change in carrier concentration, whose resulting conductance change is measured. This allows a systematic study of the kinetic properties of the binding system. We apply this approach to the specific binding of human immunoglobulin E (IgE), an antibody involved in parasite immunity, with an aptamer at different ionic strengths (Na⁺ and Mg²⁺) and temperatures. Experimental results demonstrate increased-rate binding kinetics at higher salt-ion concentrations and temperatures. In particular, the divalent cation Mg²⁺ yields more pronounced changes in the conformational structure of the aptamer than the monovalent cation Na⁺. In addition, the dissociation of the aptamer-protein complex at room temperature is found to be characterized by large unfavorable changes in the activation enthalpy and entropy.

ITC Measurement for High-Affinity Aptamers Binding to Their Target Proteins

Aptamers are nucleic acid molecules that bind to a target molecule with high affinity and specificity, which are generated by a process known as systematic evolution of ligands by exponential enrichment (SELEX). Because of their high affinity and specificity, aptamers were developed as therapeutic agents. Although aptamers are investigated as promising therapeutic agents, the mechanism of their high affinity and specificity is not clear. Therefore, structural and biophysical studies are important to know that. To date, ITC is increasingly being used to study the thermodynamic basis of aptamer-target protein interactions. Understanding the mechanism of aptamer binding would contribute to their development for therapeutic applications. In this chapter, we describe the protocol to study the thermodynamics of aptamer-protein interactions.

Isothermal titration calorimetry for characterization of recombinant proteins

Isothermal titration calorimetry is widely used to measure the affinities and enthalpies of interaction between proteins and/or small molecules. The quantitative nature of the technique is especially useful in the characterization of recombinant proteins while determining the fraction of protein capable of binding a specific ligand and thus the protein purity. The revealed thermodynamic information sheds light on the binding mechanism, important for the targeted drug design of the biologics. Here we show examples how, together with the thermal shift assay, combination of both techniques enables characterization of protein stability and ligand binding. Furthermore, the binding-linked reactions that strongly affect the observed thermodynamic parameters and must be dissected to obtain the intrinsic parameters that are necessary for the structure-based rational drug design are being demonstrated using inhibitors of Hsp90, an anticancer target protein.

Investigation of the interactions between aptamer and misfolded proteins: From monomer and oligomer to fibril by single-molecule force spectroscopy

Increasing knowledge on the understanding interactions of aptamer with misfolded proteins (including monomer, oligomer, and amyloid fibril) is crucial for development of aggregation inhibitors and diagnosis of amyloid diseases. Herein, the interactions of lysozyme monomer-, oligomer-, and amyloid fibril-aptamer were investigated using single-molecule force spectroscopy. The results revealed that the aptamer screened against lysozyme monomer could also bind to oligomer and amyloid fibril, in spite of the recognition at a lower binding probability. It may be attributed to the inherent structural differences of misfolded proteins and the flexible conformation of aptamer. In addition, dynamic force spectra showed that there were similar dissociation paths in the dissociation process of lysozyme monomer-, oligomer-, and amyloid fibril-aptamer complexes. It showed that the dissociation only passed 1 energy barrier from the binding state to the detachment. However, the dynamic parameters suggested that the oligomer- and amyloid fibril-aptamer were more stable than lysozyme monomer-aptamer. The phenomena may result from the exposure of aptamer-recognized sequences on the surface and the electrostatic interactions. This work demonstrated that single-molecule force spectroscopy could be a powerful tool to study the binding behavior of the aptamer with misfolded proteins at single-molecule level, providing abundant information for researches and comprehensive applications of aptamer probes in diagnosis of amyloid diseases.

Thermodynamic study of aptamers binding to their target proteins

Aptamers are nucleic acids that bind to a target molecule with high affinity and specificity, which are selected from systematic evolution of ligands by exponential enrichment (SELEX). Aptamers feature high affinity and specificity to their target molecule and a large structural diversity; biophysical tools, together with structural studies, are essential to reveal the mechanism of aptamers recognition. Furthermore, understanding the mechanism of action would also contribute to their development for therapeutic applications. Isothermal titration calorimetry (ITC) is a fast and robust method to study the physical basis of molecular interactions. In a single experiment, it provides all thermodynamic parameters of a molecular interaction, including dissociation constant, K_d; Gibbs free energy change, ΔG; enthalpy change, ΔH; entropy change, ΔS; and stoichiometry, N. The development of modern microcalorimeters significantly contributed to the expansion of the ITC use in biological systems. Therefore, ITC has been applied to the development of small therapeutic agents that bind to target proteins and is increasingly being used to study aptamer-target protein interactions. This review focuses on thermodynamic approaches for understanding the molecular principles of aptamer-target interactions.

Chronopotentiometric sensing of specific interactions between lysozyme and the DNA aptamer

Specific DNA-protein interactions are vital for cellular life maintenance processes, such as transcriptional regulation, chromosome maintenance, replication and DNA repair, and their monitoring gives valuable information on molecular-level organization of those processes. Here, we propose a new method of label-free electrochemical sensing of sequence specific binding between the lysozyme protein and a single stranded DNA aptamer specific for lysozyme (DNA_apta) that exploits the constant current chronopotentiometric stripping (CPS) analysis at modified mercury electrodes. Specific lysozyme-DNA_apta binding was distinguished from nonspecific lysozyme-DNA interactions at thioglycolic acid-modified mercury electrodes, but not at the dithiothreitol-modified or bare mercury electrodes. Stability of the surface-attached lysozyme-DNA_apta layer depended on the stripping current (I_str) intensity, suggesting that the integrity of the layer critically depends on the time of its exposure to negative potentials. Stabilities of different lysozyme-DNA complexes at the negatively polarized electrode surface were tested, and it was shown that structural transitions of the specific lysozyme-DNA_apta complexes occur in the I_str ranges different from those observed for assemblies of lysozyme with DNA sequences capable of only nonspecific lysozyme-DNA interactions. Thus, the CPS allows distinct discrimination between specific and non-specific protein-DNA binding and provides valuable information on stability of the nucleic acid-protein interactions at the polarized interfaces.

Electrochemical Affinity Biosensors Based on Disposable Screen-Printed Electrodes for Detection of Food Allergens

Food allergens are proteins from nuts and tree nuts, fish, shellfish, wheat, soy, eggs or milk which trigger severe adverse reactions in the human body, involving IgE-type antibodies. Sensitive detection of allergens in a large variety of food matrices has become increasingly important considering the emergence of functional foods and new food manufacturing technologies. For example, proteins such as casein from milk or lysozyme and ovalbumin from eggs are sometimes used as fining agents in the wine industry. Nonetheless, allergen detection in processed foods is a challenging endeavor, as allergen proteins are degraded during food processing steps involving heating or fermentation. Detection of food allergens was primarily achieved via Enzyme-Linked Immuno Assay (ELISA) or by chromatographic methods. With the advent of biosensors, electrochemical affinity-based biosensors such as those incorporating antibodies and aptamers as biorecognition elements were also reported in the literature. In this review paper, we highlight the success achieved in the design of electrochemical affinity biosensors based on disposable screen-printed electrodes towards detection of protein allergens. We will discuss the analytical figures of merit for various disposable screen-printed affinity sensors in relation to methodologies employed for immobilization of bioreceptors on transducer surface.

Kinetic and Thermodynamic Analyses of Interaction between a High-Affinity RNA Aptamer and Its Target Protein

AML1 (RUNX1) protein is an essential transcription factor involved in the development of hematopoietic cells. Several genetic aberrations that disrupt the function of AML1 have been frequently observed in human leukemia. AML1 contains a DNA-binding domain known as the Runt domain (RD), which recognizes the RD-binding double-stranded DNA element of target genes. In this study, we identified high-affinity RNA aptamers that bind to RD by systematic evolution of ligands by exponential enrichment. The binding assay using surface plasmon resonance indicated that a shortened aptamer retained the ability to bind to RD when 1 M potassium acetate was used. A thermodynamic study using isothermal titration calorimetry (ITC) showed that the aptamer-RD interaction is driven by a large enthalpy change, and its unfavorable entropy change is compensated by a favorable enthalpy change. Furthermore, the binding heat capacity change was identified from the ITC data at various temperatures. The aptamer binding showed a large negative heat capacity change, which suggests that a large apolar surface is buried upon such binding. Thus, we proposed that the aptamer binds to RD with long-range electrostatic force in the early stage of the association and then changes its conformation and recognizes a large surface area of RD. These findings about the biophysics of aptamer binding should be useful for understanding the mechanism of RNA-protein interaction and optimizing and modifying RNA aptamers.

Versatile SPR aptasensor for detection of lysozyme dimer in oligomeric and aggregated mixtures

A Surface Plasmon Resonance (SPR) sensor for the quantitation of lysozyme dimer in monomer-dimer mixtures, reaching a detection limit of 1.4nM dimer, has been developed. The sensor is based on an aptamer which, although developed for the monomeric form, binds also the dimeric form but with a strikingly different kinetics. The aptasensor was calibrated using a dimer obtained by cross-linking. Sensorgrams acquired with the aptasensor in monomer-dimer mixtures were analysed using Principal Components Analysis and Multiple Regression to establish correlations with the dimer content in the mixtures. The method allows the detection of 0.1-1% dimer in monomer solutions without any separation. As an application, the aptasensor was used to qualitatively observe the initial stages of aggregation of lysozyme solutions at 60°C and pH 2, through the variations in lysozyme dimer amounts. Several other methods were used to characterize the lysozyme dimer obtained by cross-linking and confirm the SPR results. This work highlights the versatility of the aptasensor, which can be used, by simply tuning the experimental conditions, for the sensitive detection of either the monomer or the dimer and for the observation of the aggregation process of lysozyme.

Characterizing aptamer small molecule interactions with backscattering interferometry

Aptamers are segments of single-strand DNA or RNA used in a wide array of applications, including sensors, therapeutics, and cellular process regulators. Aptamers can bind many target species, including proteins, peptides, and small molecules (SM) with high affinity and specificity. They are advantageous because they can be identified in vitro by SELEX, produced rapidly and relatively economically using oligonucleotide synthesis. The use of aptamers as SM probes has experienced a recent rebirth, and because of their unique properties they represent an attractive alternative to antibodies. Current assay methodology for characterizing small molecule-aptamer binding is limited by either mass sensitivity, as in biolayer interferometry (BLI) and surface plasmon resonance (SPR), or the need for using a fluorophore, as in thermophoresis. Here we report that backscattering interferometry (BSI), a label-free and free-solution sensing technique, can be used to effectively characterize SM-aptamer interactions, providing Kd values on microliter sample quantities and at low nanomolar sensitivity. To demonstrate this capability we measured the aptamer affinity for three previously reported small molecules; bisphenol A, tenofovir, and epirubicin showing BSI provided values consistent with those published previously. We then quantified the Kd values for aptamers to ampicillin, tetracycline and norepinephrine. All measurements produced R(2) values >0.95 and an excellent signal to noise ratio at target concentrations that enable true Kd values to be obtained. No immobilization or labeling chemistry was needed, expediting the assay which is also insensitive to the large relative mass difference between the interacting molecules.

Ensemble and single-molecule biophysical characterization of D17.4 DNA aptamer-IgE interactions

BACKGROUND

The IgE-binding DNA aptamer 17.4 is known to inhibit the interaction of IgE with the high-affinity IgE Fc receptor FcεRI. While this and other aptamers have been widely used and studied, there has been relatively little investigation of the kinetics and energetics of their interactions with their targets, by either single-molecule or ensemble methods.

METHODS

The dissociation kinetics of the D17.4/IgE complex and the effects of temperature and ionic strength were studied using fluorescence anisotropy and single-molecule spectroscopy, and activation parameters calculated.

RESULTS

The dissociation of D17.4/IgE complex showed a strong dependence on temperature and salt concentration. The koff of D17.4/IgE complex was calculated to be (2.92±0.18)×10(-3) s(-1) at 50 mM NaCl, and (1.44±0.02)×10(-2) s(-1) at 300 mM NaCl, both in 1 mM MgCl2 and 25°C. The dissociation activation energy for the D17.4/IgE complex, Ea, was 16.0±1.9 kcal mol(-1) at 50 mM NaCl and 1 mM MgCl2. Interestingly, we found that the C19A mutant of D17.4 with stabilized stem structure showed slower dissociation kinetics compared to D17.4. Single-molecule observations of surface-immobilized D17.4/IgE showed much faster dissociation kinetics, and heterogeneity not observable by ensemble techniques.

CONCLUSIONS

The increasing koff value with increasing salt concentration is attributed to the electrostatic interactions between D17.4/IgE. We found that both the changes in activation enthalpy and activation entropy are insignificant with increasing NaCl concentration. The slower dissociation of the mutant C19A/IgE complex is likely due to the enhanced stability of the aptamer.

GENERAL SIGNIFICANCE

The activation parameters obtained by applying transition state analysis to kinetic data can provide details on mechanisms of molecular recognition and have applications in drug design. Single-molecule dissociation kinetics showed greater kinetic complexity than was observed in the ensemble in-solution systems, potentially reflecting conformational heterogeneity of the aptamer. This article is part of a Special Issue entitled: Physiological Enzymology and Protein Functions.

Single-Stranded DNA Aptamers against Pathogens and Toxins: Identification and Biosensing Applications

Molecular recognition elements (MREs) can be short sequences of single-stranded DNA, RNA, small peptides, or antibody fragments. They can bind to user-defined targets with high affinity and specificity. There has been an increasing interest in the identification and application of nucleic acid molecular recognition elements, commonly known as aptamers, since they were first described in 1990 by the Gold and Szostak laboratories. A large number of target specific nucleic acids MREs and their applications are currently in the literature. This review first describes the general methodologies used in identifying single-stranded DNA (ssDNA) aptamers. It then summarizes advancements in the identification and biosensing application of ssDNA aptamers specific for bacteria, viruses, their associated molecules, and selected chemical toxins. Lastly, an overview of the basic principles of ssDNA aptamer-based biosensors is discussed.

Affinity of aptamers binding 33-mer gliadin peptide and gluten proteins: Influence of immobilization and labeling tags

Aptamers are starting to increase the reagents tool box to develop more sensitive and reliable methods for food allergens. In most of these assays, aptamers have to be modified for detection and/or immobilization purposes. To take full advantage of their affinity, which decisively influence the detectability, these modifications must be faced rationally. In this work, a recently developed aptamer for an immunotoxic peptide of gliadin associated to celiac disease is used in different configurations and modified with various markers and anchored groups to evaluate the influence of such modifications on the real affinity. The interaction in solution with the peptide is strong for a relatively small molecule (Kd = 45 ± 10 nM, 17 °C) and slightly stronger than that for the immobilized intact protein due to a cooperative binding effect. Comparatively, while only minor differences were found when the peptide or the aptamer were immobilized, labeling with a biotin resulted preferable over fluorescein (Kd = 102 ± 11 vs 208 ± 54 nM, 25 °C). These findings are of prime importance for the design of an aptamer-based analytical method for gluten quantification.

An RNA aptamer possessing a novel monovalent cation-mediated fold inhibits lysozyme catalysis by inhibiting the binding of long natural substrates

RNA aptamers are being developed as inhibitors of macromolecular and cellular function, diagnostic tools, and potential therapeutics. Our understanding of the physical nature of this emerging class of nucleic acid-protein complexes is limited; few atomic resolution structures have been reported for aptamers bound to their protein target. Guided by chemical mapping, we systematically minimized an RNA aptamer (Lys1) selected against hen egg white lysozyme. The resultant 59-nucleotide compact aptamer (Lys1.2minE) retains nanomolar binding affinity and the ability to inhibit lysozyme's catalytic activity. Our 2.0-Å crystal structure of the aptamer-protein complex reveals a helical stem stabilizing two loops to form a protein binding platform that binds lysozyme distal to the catalytic cleft. This structure along with complementary solution analyses illuminate a novel protein-nucleic acid interface; (1) only 410 Å(2) of solvent accessible surface are buried by aptamer binding; (2) an unusually small fraction (∼18%) of the RNA-protein interaction is electrostatic, consistent with the limited protein phosphate backbone contacts observed in the structure; (3) a single Na(+) stabilizes the loops that constitute the protein-binding platform, and consistent with this observation, Lys1.2minE-lysozyme complex formation takes up rather than displaces cations at low ionic strength; (4) Lys1.2minE inhibits catalysis of large cell wall substrates but not catalysis of small model substrates; and (5) the helical stem of Lys1.2minE can be shortened to four base pairs (Lys1.2minF) without compromising binding affinity, yielding a 45-nucleotide aptamer whose structure may be an adaptable protein binding platform.

Two interconvertible folds modulate the activity of a DNA aptamer against transferrin receptor

Thanks to their ability to recognize biomolecular targets with high affinity and specificity, nucleic acid aptamers are increasingly investigated as diagnostic and therapeutic tools, particularly when their targets are cell-surface receptors. Here, we investigate the relationship between the folding of an anti-mouse transferrin receptor DNA aptamer and its interaction with the transferrin receptor both in vitro and in living cells. We identified and purified two aptamer conformers by means of chromatographic techniques. Fluorescence-anisotropy measurements showed that only one fold is able to bind mouse transferrin receptor. Besides displaying enhanced endocytosis in living mouse fibroblasts, the purified active fold is internalized also in human pancreatic cancer cells. Starting from these observations, we rationally designed variations of the parent sequence aimed at stabilizing the active fold, and consequently increase aptamer activity. A truncated version and full-length mutants with higher affinity than the parent sequence are shown.

Salt bridge exchange binding mechanism between streptavidin and its DNA aptamer--thermodynamics and spectroscopic evidences

Protein-nucleic acids binding driven by electrostatic interactions typically are characterized by the release of counter ions, and the salt-inhibited binding association constant (K(a)) and the magnitude of exothermic binding enthalpy (ΔH). Here, we report a non-classical thermodynamics of streptavidin (SA)-aptamer binding in NaCl (140-350 mM) solutions near room temperatures (23-27 °C). By using isothermal titration calorimetry (ITC) and circular dichroism (CD)/fluorescence spectroscopy, we found that the binding was enthalpy driven with a large entropy cost (ΔH -20.58 kcal mol(-1), TΔS -10.99 kcal mol(-1), and K(a) 1.08 × 10(7)  M(-1) at 140 mM NaCl 25 °C). With the raise of salt concentrations, the ΔH became more exothermic, yet the K(a) was almost unchanged (ΔH -26.29 kcal mol(-1) and K(a) 1.50 × 10(7)  M(-1) at 350 mM NaCl 25 °C). The data suggest that no counter Na(+) was released in the binding. Spectroscopy data suggest that the binding, with a stoichiometry of 2, was accompanied with substantial conformational changes on SA, and the changes were insensitive to the variation of salt concentrations. To account for the non-classical results, we propose a salt bridge exchange model. The intramolecular binding-site salt bridge(s) of the free SA and the charged phosphate group of aptamers re-organize to form the binding complex by forming a new intermolecular salt bridge(s). The salt bridge exchange binding process requires minimum amount of counter ions releasing but dehydration of the contacting surface of SA and the aptamer. The energy required for dehydration is reduced in the case of binding solution with higher salt concentration and account for the higher binding exothermic mainly.

Development of a label-free aptasensor for monitoring the self-association of lysozyme

A novel aptamer and surface plasmon resonance (SPR)-based sensor was developed for the label-free detection of lysozyme. The aptasensor is characterised by a detection limit of 1 μg mL(-1) and a linear range of 5-50 μg mL(-1). As an application, we examined the usefulness of the aptasensor for monitoring the early stages of the aggregation of lysozyme. It was surprisingly found that, despite a significant decrease in monomer content during aggregation, the response of the aptasensor for protein solutions aged for 12 hours was similar to that for the fresh protein. To correlate the results obtained with the aptasensor with the composition of lysozyme solutions at various time points, we examined them in detail by atomic force microscopy (AFM), thioflavin T fluorescence, size-exclusion chromatography (SEC) and Matrix Assisted Laser Desorption Ionisation Time of Flight Mass Spectrometry (MALDI-TOF-MS). All methods together indicated that during the initial hours of aggregation, the protein solutions contained small lysozyme oligomers (mainly dimers) and decreasing amounts of monomers. Our results thus suggest that the aptamer also recognizes lysozyme dimers/oligomers. A higher non-specific binding was observed for the aggregated lysozyme at the surface of the aptasensor as compared to the native protein. This was attributed to the hydrophobic patches which are exposed by the unfolded lysozyme and/or oligomer species, allowing for different adsorption and organisation at the surface of the aptasensor. This hypothesis is supported by square wave voltammetry (SWV) studies using solutions of aggregated lysozyme. A higher electrochemical signal due to the direct oxidation of tyrosine/tryptophan residues was observed for aged protein solutions as compared to the fresh solution, indicative of an increased number of such exposed electroactive residues and of overall increased surface hydrophobicity of the protein. Our work presents a label-free lysozyme aptasensor that is useful not only for the detection of the protein monomer but also for observing the onset of aggregation. The approach can be extended to other proteins which are prone to aggregation.

Biophysical characterization of VEGF-aHt DNA aptamer interactions

The binding of the well-studied DNA aptamer aHt (5'-ATACCAGTCTATTCAATTGGGCCCGTCCGTAT GGTGGGTGTGCTGGCCAG-3'), which has been demonstrated to recognize human vascular endothelial growth factor (VEGF₁₆₅) to recombinant VEGF was characterized using fluorescence anisotropy, isothermal titration calorimetry and analytical ultracentrifugation. The negatively-charged DNA aptamer is selective for VEGF and does not recognize positively-charged hen egg lysozyme, or bovine serum albumin. In contrast to the VEGF association of the previously-described aV DNA aptamer, where the binding is enthalpically driven and sequence-specific, the binding of the aHt aptamer to VEGF is entropically-driven and not abolished by scrambling of the sequence.

Synthetic genetic polymers capable of heredity and evolution

Genetic information storage and processing rely on just two polymers, DNA and RNA, yet whether their role reflects evolutionary history or fundamental functional constraints is currently unknown. With the use of polymerase evolution and design, we show that genetic information can be stored in and recovered from six alternative genetic polymers based on simple nucleic acid architectures not found in nature [xeno-nucleic acids (XNAs)]. We also select XNA aptamers, which bind their targets with high affinity and specificity, demonstrating that beyond heredity, specific XNAs have the capacity for Darwinian evolution and folding into defined structures. Thus, heredity and evolution, two hallmarks of life, are not limited to DNA and RNA but are likely to be emergent properties of polymers capable of information storage.

Applications of isothermal titration calorimetry in pure and applied research--survey of the literature from 2010

Isothermal titration calorimetry (ITC) is a biophysical technique for measuring the formation and dissociation of molecular complexes and has become an invaluable tool in many branches of science from cell biology to food chemistry. By measuring the heat absorbed or released during bond formation, ITC provides accurate, rapid, and label-free measurement of the thermodynamics of molecular interactions. In this review, we survey the recent literature reporting the use of ITC and have highlighted a number of interesting studies that provide a flavour of the diverse systems to which ITC can be applied. These include measurements of protein-protein and protein-membrane interactions required for macromolecular assembly, analysis of enzyme kinetics, experimental validation of molecular dynamics simulations, and even in manufacturing applications such as food science. Some highlights include studies of the biological complex formed by Staphylococcus aureus enterotoxin C3 and the murine T-cell receptor, the mechanism of membrane association of the Parkinson's disease-associated protein α-synuclein, and the role of non-specific tannin-protein interactions in the quality of different beverages. Recent developments in automation are overcoming limitations on throughput imposed by previous manual procedures and promise to greatly extend usefulness of ITC in the future. We also attempt to impart some practical advice for getting the most out of ITC data for those researchers less familiar with the method.

DNA aptamers against the Lup an 1 food allergen

Using in vitro selection, high affinity DNA aptamers to the food allergen Lup an 1, ß-conglutin, were selected from a pool of DNA, 93 bases in length, containing a randomised sequence of 49 bases. ß-conglutin was purified from lupin flour and chemically crosslinked to carboxylated magnetic beads. Peptide mass fingerprinting was used to confirm the presence of the ß-conglutin. Single stranded DNA was generated from the randomised pool using T7 Gene 6 Exonuclease and was subsequently incubated with the magnetic beads and the captured DNA was released and amplified prior to a further round of Systematic Evolution of Ligands by Exponential Enrichment (SELEX). Evolution was monitored using enzyme linked oligonucleotide assay and surface plasmon resonance. Once a plateau in evolution was reached, the isolated DNA sequences were cloned and sequenced. The consensus motif was identified via alignment of the sequences and the affinities of these sequences for immobilised ß-conglutin were determined using surface plasmon resonance. The selected aptamer was demonstrated to be highly specific, showing no cross-reactivity with other flour ingredients or with other conglutin fractions of lupin. The secondary structures of the selected aptamers were predicted using m-fold. Finally, the functionality of the selected aptamers was demonstrated using a competitive assay for the quantitative detection of ß-conglutin. . Future work will focus on structure elucidation and truncation of the selected sequences to generate a smaller aptamer for application to the analysis of the Lup an 1 allergen in foodstuffs.