Fabrication of gelatin–hyaluronic acid hybrid scaffolds with tunable porous structures for soft tissue engineering

Flexible cellulose nanofiber aerogel with enhanced porous structure and its applications in copper(II) removal

In order to achieve an aerogel with both rigid pore structures and desired flexibility, stiff carboxyl-functionalized cellulose nanofiber (CNFs) were introduced into a flexible polyvinyl alcohol-polyethyleneimine (PVA-PEI) crosslinking network, with 4-formylphenylboronic acid (4FPBA) bridging within the PVA-PEI network to enable dynamic boroxine and imine bond formation. The strong covalent bonds and hydrogen connections between CNF and the crosslinking network enhanced the wet stability of the aerogel while also contributed to its thermal stability. Importantly, the harmonious coordination between the stiff CNF and the flexible polymer chains not only facilitated aerogel flexibility but also enhanced its increased specific surface area by improving pore structure. Moreover, the inclusion of CNF enhanced the adsorption capacity of the aerogel, rendering it effective for removing heavy metal ions. The specific surface area and adsorption capacity for copper ions of the aerogel increased significantly with a 3 wt% addition CNF suspension, reaching 19.74 m2 g-1 and 60.28 mg g-1, respectively. These values represent a remarkable increase of 590.21 % and 213.96 %, respectively, compared to the blank aerogel. The CNF-enhanced aerogel in this study, characterized by its well-defined pore structures, and desired flexibility, demonstrates versatile applicability across multiple domains, including environmental protection, thermal insulation, electrode fabrication, and beyond.

Graphene-silymarin-loaded chitosan/gelatin/hyaluronic acid hybrid constructs for advanced full-thickness burn wound management

Burn wounds (BWs) with extensive blood loss, along with bacterial infections and poor healing, may become detrimental and pose significant rehabilitation obstacles in medical facilities. Therefore, the freeze-drying method synthesized novel hemocompatible chitosan, gelatin, and hyaluronic acid infused with graphene oxide-silymarin (CGH-SGO) hybrid constructs for application as a BW patch. Most significantly, synthesized hybrid constructs exhibited an interconnected-porous framework with precise pore sizes (≈118.52 µm) conducive to biological functions. Furthermore, the FTIR and XRD analyses document the constructs' physiochemical interactions. Similarly, enhanced swelling ratios, adequate WVTR (736 ± 78 g m-2 hr-1), and bio-degradation rates were seen during the physiological examination of constructs. Following the in vitro investigations, SMN-GO added to constructs improved their anti-bacterial (against E.coli and S. aureus), anti-oxidant, hemocompatible, and bio-compatible characteristics in conjunction with prolonged drug release. Furthermore, in vivo, implanting constructs on wounds exhibited significant acceleration in full-thickness burn wound (FT-BW) healing on the 14th day (CGH-SGO: 95 ± 2.1 %) in contrast with the control (Gauze: 71 ± 4.2 %). Additionally, contrary to gauze, the in vivo rat tail excision model administered with constructs assured immediate blood clotting. Therefore, CGH-SGO constructs with an improved porous framework, anti-bacterial activity, hemocompatibility, and biocompatibility could represent an attractive option for healing FT-BWs.

Study on Synergistic Effects of Nanohydroxyapatite/High-Viscosity Carboxymethyl Cellulose Scaffolds Stimulated by LIPUS for Bone Defect Repair of Rats

Despite the self-healing capacity of bone, the regeneration of critical-size bone defects remains a major clinical challenge. In this study, nanohydroxyapatite (nHAP)/high-viscosity carboxymethyl cellulose (hvCMC, 6500 mPa·s) scaffolds and low-intensity pulsed ultrasound (HA-LIPUS) were employed to repair bone defects. First, hvCMC was prepared from ramie fiber, and the degree of substitution (DS), purity, and content of NaCl of hvCMC samples were 0.91, 99.93, and 0.017%, respectively. Besides, toxic metal contents were below the permissible limits for pharmaceutically used materials. Our results demonstrated that the hvCMC is suitable for pharmaceutical use. Second, nHAP and hvCMC were employed to prepare scaffolds by freeze-drying. The results indicated that the scaffolds were porous, and the porosity was 35.63 ± 3.52%. Subsequently, the rats were divided into four groups (n = 8) randomly: normal control (NC), bone defect (BD), bone defect treated with nHAP/hvCMC scaffolds (HA), and bone defect treated with nHAP/hvCMC scaffolds and stimulated by LIPUS (HA-LIPUS). After drilling surgery, nHAP/hvCMC scaffolds were implanted in the defect region of HA and HA-LIPUS rats. Meanwhile, HA-LIPUS rats were treated by LIPUS (1.5 MHz, 80 mW cm-2) irradiation for 2 weeks. Compared with BD rats, the maximum load and bone mineral density of HA-LIPUS rats were increased by 20.85 and 51.97%, respectively. The gene and protein results indicated that nHAP/hvCMC scaffolds and LIPUS promoted the bone defect repair and regeneration of rats significantly by activating Wnt/β-catenin and inhibiting OPG/RANKL signaling pathways. Overall, compared with BD rats, nHAP/hvCMC scaffolds and LIPUS promoted bone defect repair significantly. Furthermore, the research results also indicated that there are synergistic effects for bone defect repair between the nHAP/hvCMC scaffolds and LIPUS.

Augmented physical, mechanical, and cellular responsiveness of gelatin-aldehyde modified xanthan hydrogel through incorporation of silicon nanoparticles for bone tissue engineering

Bioactive scaffolds fabricated from a combination of organic and inorganic biomaterials are a promising approach for addressing defects in bone tissue engineering. In the present study, a self-crosslinked nanocomposite hydrogel, composed of gelatin/aldehyde-modified xanthan (Gel-AXG) is successfully developed by varying concentrations of porous silicon nanoparticles (PSiNPs). The effect of PSiNPs incorporation on physical, mechanical, and biological performance of the nanocomposite hydrogel is evaluated. Morphological analysis reveals formation of highly porous 3D microstructures with interconnected pores in all nanocomposite hydrogels. Increased content of PSiNPs results in a lower swelling ratio, reduced porosity and pore size, which in turn impeded media penetration and slowed down the degradation process. In addition, remarkable enhancements in dynamic mechanical properties are observed in Gel-AXG-8%Si (compressive strength: 0.6223 MPa at 90 % strain and compressive modulus: 0.054 MPa), along with improved biomineralization ability via hydroxyapatite formation after immersion in simulated body fluid (SBF). This optimized nanocomposite hydrogel provides a sustained release of Si ions at safe dose levels. Furthermore, in-vitro cytocompatibility studies using MG-63 cells exhibited remarkable performance in terms of cell attachment, proliferation, and ALP activity for Gel-AXG-8%Si. These findings suggest that the prepared nanocomposite hydrogel holds promising potential as a scaffold for bone tissue engineering.

Cellulose nanocrystals-reinforced dual crosslinked double network GelMA/hyaluronic acid injectable nanocomposite cryogels with improved mechanical properties for cartilage tissue regeneration

Improvement of mechanical properties of injectable tissue engineering scaffolds is a current challenge. The objective of the current study is to produce a highly porous injectable scaffold with improved mechanical properties. For this aim, cellulose nanocrystals-reinforced dual crosslinked porous nanocomposite cryogels were prepared using chemically crosslinked methacrylated gelatin (GelMA) and ionically crosslinked hyaluronic acid (HA) through the cryogelation process. The resulting nanocomposites showed highly porous structures with interconnected porosity (>90%) and mean pore size in the range of 130-296 μm. The prepared nanocomposite containing 3%w/v of GelMA, 20 w/w% of HA, and 1%w/v of CNC showed the highest Young's modulus (10 kPa) and excellent reversibility after 90% compression and could regain its initial shape after injection by a 16-gauge needle in the aqueous media. The in vitro results demonstrated acceptable viability (>90%) and migration of the human chondrocyte cell line (C28/I2), and chondrogenic differentiation of human adipose stem cells. A two-month in vivo assay on a rabbit's ear model confirmed that the regeneration potential of the prepared cryogel is comparable to the natural autologous cartilage graft, suggesting it is a promising alternative for autografts in the treatment of cartilage defects.

A Janus adhesive hydrogel sheet for preventing postoperative tissue adhesion of intestinal injuries

Although adhesive hydrogels represent an alternative to surgical sutures for non-invasive tissue wound sealing, those with indiscriminate adhesion fail to hold wounds while inhibiting postoperative tissue adhesion, thus limiting their application in intestinal repair. In this study, an asymmetric adhesive hydrogel sheet composed mainly of polyacrylic acid (PAA) and gelatin (GA) that can be wet-adhered to the surface of intestinal tissue was developed. One side of the GA-PAA hydrogel sheet was complexed with polyvinyl alcohol (PVA), which shielded the excess adhesion based on a physical barrier. Both sides of the PVA/GA-PAA hydrogel showed distinct adhesive and antiadhesive properties. Intriguingly, the anti-adhesive side showed significant anti-adhesion toward specific proteins. The results of animal experiments showed that the PVA/GA-PAA hydrogel could firmly adhere to the intestine to stop leakage and prevent post-operative tissue adhesion two weeks after surgery. The hematoxylin and eosin (H&E) staining results showed that the damaged intestinal serosa was repaired without tissue adhesion. It is believed that the controllable adhesion of the adhesive hydrogel offers better prospects for intestinal repair.

Osteogenic differentiation of human adipose-derived mesenchymal stem cells in a bisphosphonate-functionalized polycaprolactone/gelatin scaffold

Recent trends in bone tissue engineering have focused on the development of biomimetic constructs with appropriate mechanical and physiochemical properties. Here, we report the fabrication of an innovative biomaterial scaffold based on a new bisphosphonate-containing synthetic polymer combined with gelatin. To this end, zoledronate (ZA)-functionalized polycaprolactone (PCL-ZA) was synthesized by a chemical grafting reaction. After adding gelatin to the PCL-ZA polymer solution, the porous PCL-ZA/gelatin scaffold was fabricated by the freeze-casting method. A scaffold with aligned pores and a porosity of 82.04 % was obtained. During in vitro biodegradability test, 49 % of its initial weight lost after 5 weeks. The elastic modulus of the PCL-ZA/gelatin scaffold was 31.4 MPa, and its tensile strength was 4.2 MPa. Based on the results of MTT assay, the scaffold had good cytocompatibility with human Adipose-Derived Mesenchymal Stem Cells (hADMSCs). Furthermore, cells grown in PCL-ZA/gelatin scaffold showed the highest mineralization and ALP activity compared to other test groups. Results of the RT-PCR test revealed that RUNX2, COL 1A1, and OCN genes were expressed in PCL-ZA/gelatin scaffold at the highest level, suggesting its good osteoinductive capacity. These results revealed that PCL-ZA/gelatin scaffold could be considered a proper biomimetic platform for bone tissue engineering.

Synthesis and evaluation of alginate, gelatin, and hyaluronic acid hybrid hydrogels for tissue engineering applications

Tissue engineering (TE) has been proposed extensively as a potential solution to the worldwide shortages of donor organs needed for transplantation. Over the years, numerous hydrogel formulations have been studied for various TE endeavours, including bone, cardiac or neural TE treatment strategies. Amongst the materials used, organic and biocompatible materials which aim to mimic the natural extracellular matrix of the native tissue have been investigated to create biomimicry regenerative environments. As such, the comparison between studies using the same materials is often difficult to accomplish due to varying material concentrations, preparation strategies, and laboratory settings, and as such these variables have a huge impact on the physio-chemical properties of the hydrogel systems. The purpose of the current study is to investigate popular biomaterials such as alginate, hyaluronic acid and gelatin in a variety of concentrations and hydrogel formulations. This aims to provide a clear and comprehensive understanding of their behaviours and provide a rational approach as to the appropriate selection of natural polysaccharides in specific targeted TE strategies.

Synthesis of Novel Hyaluronic Acid Sulfonated Hydrogels Using Safe Reactants: A Chemical and Biological Characterization

Here, we present a one-pot procedure for the preparation of hyaluronic acid (HA) sulfonated hydrogels in aqueous alkaline medium. The HA hydrogels were crosslinked using 1,4-butanedioldiglycidyl ether (BDDE) alone, or together with N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (Bes), as a safe sulfonating agent. Conditions for the simultaneous reaction of HA with BDDE and Bes were optimized and the resulting hydrogels were characterized under different reaction times (24, 72, and 96 h). The incorporation of sulfonic groups into the HA network was proven by elemental analysis and FTIR spectroscopy and its effect on water uptake was evaluated. Compared with the non-sulfonated sample, sulfonated gels showed improved mechanical properties, with their compressive modulus increased from 15 to 70 kPa, higher stability towards hyaluronidase, and better biocompatibility to 10T1/2 fibroblasts, especially after the absorption of collagen. As main advantages, the procedure described represents an easy and reproducible methodology for the fabrication of sulfonated hydrogels, which does not require toxic chemicals and/or solvents.

Injectable Hydrogels Based on Inter-Polyelectrolyte Interactions between Hyaluronic Acid, Gelatin, and Cationic Cellulose Nanocrystals

The present work dealt with the development of physically cross-linked injectable hydrogels with potential applications in tissue engineering. The hydrogels were composed of a ternary mixture of a polyanion and a polyampholyte, hyaluronic acid (HA) and gelatin, respectively, bridged by cationic cellulose nanocrystals (cCNCs). A 3D network is formed by employing attractive electrostatic interactions and hydrogen bonding between these components under physiological conditions. The hydrogels demonstrated low viscosity at high stresses, enabling easy injection, structural stability at low stresses (<15 Pa), and nearly complete structure recovery within several minutes. Increasing the cCNC content (>3%) reduced hydrogel swelling and decelerated the degradation in phosphate-buffered saline as compared to that in pure HA and HA-gelatin samples. Biological evaluation of the hydrogel elutions showed excellent cell viability. The proliferation of fibroblasts exposed to elutions of hydrogels with 5% cCNCs reached ∼200% compared to that in the positive control after 11 days. Considering these results, the prepared hydrogels hold great potential in biomedical applications, such as injectable dermal fillers, 3D bioprintable inks, or 3D scaffolds to support and promote soft tissue regeneration.

Improvement of IgA Nephropathy and Kidney Regeneration by Functionalized Hyaluronic Acid and Gelatin Hydrogel

BACKGROUND

Immunoglobulin A (IgA) nephropathy (IgAN) is one of an important cause of progressive kidney disease and occurs when IgA settles in the kidney resulted in disrupts kidney's ability to filter waste and excess water. Hydrogels are promising material for medical applications owing to their excellent adaptability and filling ability. Herein, we proposed a hyaluronic acid/gelatin (CHO-HA/Gel-NH₂) bioactive hydrogel as a cell carrier for therapeutic kidney regeneration in IgAN.

METHODS

CHO-HA/Gel-NH₂ hydrogel was fabricated by Schiff-base reaction without any additional crosslinking agents. The hydrogel concentrations and ratios were evaluated to enhance adequate mechanical properties and biocompatibility for further in vivo study. High serum IgA ddY mice kidneys were treated with human urine-derived renal progenitor cells encapsulated in the hydrogel to investigate the improvement of IgA nephropathy and kidney regeneration.

RESULTS

The stiffness of the hydrogel was significantly enhanced and could be modulated by altering the concentrations and ratios of hydrogel. CHO-HA/Gel-NH₂ at a ratio of 3/7 provided a promising milieu for cells viability and cells proliferation. From week four onwards, there was a significant reduction in blood urea nitrogen and serum creatinine level in Cell/Gel group, as well as well-organized glomeruli and tubules. Moreover, the expression of pro-inflammatory and pro-fibrotic molecules significantly decreased in the Gel/Cell group, whereas anti-inflammatory gene expression was elevated compared to the Cell group.

CONCLUSION

Based on in vivo studies, the renal regenerative ability of the progenitor cells could be further increased by this hydrogel system.

Effectively improved 3-dimensional structural stability of atelocollagen-gelatin sponge biomaterial by heat treatment

Atelocollagen-gelatin (ACG) sponge was fabricated from atelocollagen and gelatin by lyophilization without introducing toxic substances. This study aimed to investigate the effects of heat treatment on the 3-dimensional structural stability of ACG sponge biomaterial. ACG sponge samples were fabricated and heat treated at 125^oC for 12 h in the vacuum. The results revealed that heat treatment did not affect porosity, pore size and mechanical compressive strength. Heat-treated ACG sponge showed decreased absorbance and peak shift of amid I (C=O) stretches, slightly higher water uptake degree and significantly decreased in vitro degradation rate. Moreover, heat-treated ACG sponge maintained good 3-dimensional surface morphology and porous microstructure throughout 7 days, while non-heat-treated ACG sponge collapsed in less than 24 h. The human mesenchymal stromal cells (hMSCs) were shown to adhere and grow well on heat-treated ACG sponges. These results indicate that heat treatment is effective and safe to stabilize 3-dimensional ACG sponge biomaterial for tissue engineering.

Enhanced mechanical, biomineralization, and cellular response of nanocomposite hydrogels by bioactive glass and halloysite nanotubes for bone tissue regeneration

In the present study, the synergistic effect of the bioactive glass (BG) and halloysite nanotubes (HNTs) (i.e. BG@HNT) was evaluated on physicochemical and bioactive properties of polyacrylamide/poly (vinyl alcohol) (PMPV) based nanocomposite hydrogels. Here, a double-network hydrogel composed of organic-inorganic components was successfully developed by using in-situ free-radical polymerization and freeze-thawing process. Structural analyses confirmed the successful formation of the nanocomposite hydrogels through physical and chemical interactions. Morphological analysis showed that all hydrogel scaffolds are containing highly porous 3D microstructure and pore-interconnectivity. The equilibrium swelling ratio of the hydrogels was decreased by the addition of BG or BG@HNT and thereby the lower porosity and pore-size reduced the penetration of media and slow down the degradation process. Enhanced biomineralization ability of PMPV/BG@HNT was observed via apatite-forming ability (Ca/P: 1.21 ± 0.14) after immersion in the simulated body fluid as well as significantly enhanced dynamic mechanical properties (compressive strength: 102.1 kPa at 45% of strain and stiffness: 3115.0 N/m at 15% of strain). Furthermore, an enhanced attachment and growth of hFOB1.19 osteoblast cells on PMPV/BG@HNT was achieved compared to PMPV or PMPV/BG hydrogels over 14 days. The PMPV/BG@HNT nanocomposite hydrogel could have a promising application in low-load bearing bone tissue regeneration.

Hybrid Methacrylated Gelatin and Hyaluronic Acid Hydrogel Scaffolds. Preparation and Systematic Characterization for Prospective Tissue Engineering Applications

Hyaluronic acid (HA) and gelatin (Gel) are major components of the extracellular matrix of different tissues, and thus are largely appealing for the construction of hybrid hydrogels to combine the favorable characteristics of each biopolymer, such as the gel adhesiveness of Gel and the better mechanical strength of HA, respectively. However, despite previous studies conducted so far, the relationship between composition and scaffold structure and physico-chemical properties has not been completely and systematically established. In this work, pure and hybrid hydrogels of methacroyl-modified HA (HAMA) and Gel (GelMA) were prepared by UV photopolymerization and an extensive characterization was done to elucidate such correlations. Methacrylation degrees of ca. 40% and 11% for GelMA and HAMA, respectively, were obtained, which allows to improve the hydrogels’ mechanical properties. Hybrid GelMA/HAMA hydrogels were stiffer, with elastic modulus up to ca. 30 kPa, and porous (up to 91%) compared with pure GelMA ones at similar GelMA concentrations thanks to the interaction between HAMA and GelMA chains in the polymeric matrix. The progressive presence of HAMA gave rise to scaffolds with more disorganized, stiffer, and less porous structures owing to the net increase of mass in the hydrogel compositions. HAMA also made hybrid hydrogels more swellable and resistant to collagenase biodegradation. Hence, the suitable choice of polymeric composition allows to regulate the hydrogels´ physical properties to look for the most optimal characteristics required for the intended tissue engineering application.

Design and characterization of highly porous curcumin loaded freeze-dried wafers for wound healing

The goal of this research was to evaluate the beneficial effects of topical curcumin loaded freeze-dried wafers in wound healing. Curcumin wafers were fabricated by cross-linking of chitosan with beta glycerophosphate under magnetic stirring. Composite wafers were prepared by the addition of sodium hyaluronate. Wafers were fabricated by freeze-drying technique. The resulted wafers were examined by naked eye and their dimensions were measured using a caliper. % Drug content, in-vitro release and % water uptake tests were conducted to characterize the fabricated wafers. Porosity testing, compressive mechanical behavior, morphological examination using scanning electron microscopy, thermal behavior using differential scanning calorimetry and Fourier transform infrared spectroscopy were all carried out on the optimized cross-linked wafers followed by their microbiological assays and cytotoxicity studies. The results showed that the optimized wafers possessed high water uptake capabilities while entertaining very high porosity levels (86-89%). Microbiological assay revealed the superiority of the selected curcumin wafers versus free curcumin in bacterial growth inhibition against Staphylococcus epidermidis and Staphylococcus aureus (MRSA) bacteria. The anti-inflammatory effects of the selected curcumin wafers were evaluated against pro-inflammatory cytokines. The results suggested that they were significantly better than free curcumin in lowering cytokines levels. To conclude, the obtained findings revealed that curcumin wafers offered a promising solution in the field of wound healing.

Preparation of microfluidic-based pectin microparticles loaded carbon dots conjugated with BMP-2 embedded in gelatin-elastin-hyaluronic acid hydrogel scaffold for bone tissue engineering application

The controlled delivery of the bone morphogenetic protein-2 (BMP-2) with tracking ability would overcome most of the side effects linked to the burst release and uncontrolled delivery of this growth factor for bone regeneration. Herein, BMP-2-conjugated carbon dots (CDs) was used as noninvasive detection platforms to deliver BMP-2 for therapeutic applications where osteogenesis and bioimaging are both required. With this in mind, the present work aimed to develop a controlled BMP-2-CDs release system using composite scaffolds containing BMP-2-CDs loaded pectin microparticles, which had been optimized for bone regeneration. By using microfluidic approach, we encapsulated BMP-2-CDs in pectin microparticles with narrow size distribution and then incorporated into composite scaffolds composed of gelatin, elastin, and hyaluronic acid. The BMP-2-CDs was released from the composite scaffolds in a sustained fashion for up to 21 days exhibited a high controlled delivery capacity. When tested in vitro with MG-63 cells, these extraction mediums showed the intercellular uptake of BMP-2-CDs and enhanced biological properties and pro-osteogenic effect. By utilizing the pectin microparticles carrying BMP-2-CDs as promising bioimaging agents for growth factor delivery and by tuning the composition of the scaffolds, this platform has immense potential in the field of bone tissue regeneration.

Biomaterials for Neural Tissue Engineering

The therapy of neural nerve injuries that involve the disruption of axonal pathways or axonal tracts has taken a new dimension with the development of tissue engineering techniques. When peripheral nerve injury (PNI), spinal cord injury (SCI), traumatic brain injury (TBI), or neurodegenerative disease occur, the intricate architecture undergoes alterations leading to growth inhibition and loss of guidance through large distance. To improve the limitations of purely cell-based therapies, the neural tissue engineering philosophy has emerged. Efforts are being made to produce an ideal scaffold based on synthetic and natural polymers that match the exact biological and mechanical properties of the tissue. Furthermore, through combining several components (biomaterials, cells, molecules), axonal regrowth is facilitated to obtain a functional recovery of the neural nerve diseases. The main objective of this review is to investigate the recent approaches and applications of neural tissue engineering approaches.

Injectable and reversible preformed cryogels based on chemically crosslinked gelatin methacrylate (GelMA) and physically crosslinked hyaluronic acid (HA) for soft tissue engineering

Hydrogels are a promising choice for soft tissue (cartilage, skin and adipose) engineering and repair. However, lack of interconnected porosity and poor mechanical performance have hindered their application, especially in natural polymer-based hydrogels. Cryogels with the potential to overcome the shortcomings of hydrogels have drawn attention in the last few years. Thus, in this study, highly porous and mechanically robust cryogels based on interpenetrating polymer network (IPN) of gelatin methacrylate (GelMA) and hyaluronic acid (HA) were fabricated for soft tissue engineering application. Cryogels have a constant amount of GelMA (3% wt) with different concentrations of HA (from 5% to 20 % w/w). In fact, crosslinking through cryogelation in subzero temperature facilitates the formation of interconnected pores with 90 % porosity percentage without external progen. On the other hand, high mechanical stability (no failure up to 90 % compression) was achieved due to the cryogelation and chemical crosslinking of GelMA as well as physical crosslinking of HA. Furthermore, the porous and hydrophile nature of the cryogels resulted in shape memory properties under compression, which can reverse to initial shape after retaining the water. Although increasing the HA concentration followed by the density of physical crosslinking boosted the mechanical performance of cryogels under compression, it limited the reversibility properties. Nevertheless, all cryogels with different HA concentrations showed acceptable gel strength and Young's modulus (G-H-20, E = 6kPa) and had appropriate pore size for cell infiltration and nutrient transportation with good cell adhesion and high cell viability (more than 90 %). The unique property of fabricated cryogels that facilitate less invasive delivery makes them a promising alternative for the soft tissue application.

Sequential release of double drug (graded distribution) loaded gelatin microspheres/PMMA bone cement

Drugs are loaded into PMMA bone cement to reduce the risk of infection in freshly implanted prostheses or to promote the differentiation and growth of osteoblasts. However, the same method of loading of drugs in the bone cement cannot simultaneously achieve an effective antibacterial response and long-term treatment outcomes for osteoporosis based on a patient's clinical needs. In the present study, gentamicin sulfate (GS)/alendronate (ALN)-dual-loaded gelatin modified PMMA bone cement (GAPBC) was fabricated to provide rapid and continuous antibiotic release and long-term anti-osteoporotic therapy. Specifically, the gelatin microspheres were loaded with the drugs using separate methodologies, namely, ALN was loaded during fabrication of the gelatin microspheres after which GS was absorbed onto the gelatin from solution. The results demonstrate that sequential release of the GS and ALN was achieved, GS release playing a major role over the first 24 hours and ALN release dominant after 3 weeks of immersion in PBS, resulting from the graded distribution within the gelatin microspheres, and the final drug release ratio of GS (73.6%) and ALN (68.5%) from the modified bone cement was significantly higher than from PMMA bone cement. Therefore, GAPBC represents a potential drug carrier for future clinical applications.

In Vitro and In Vivo Evaluation of Carboxymethyl Cellulose Scaffolds for Bone Tissue Engineering Applications

The present study involves the development of citric acid-cross-linked carboxymethyl cellulose (C3CA) scaffolds by a freeze-drying process. Scaffolds were fabricated at different freezing temperatures of -20, -40, or -80 °C to investigate the influence of scaffold pore size on bone regeneration. All three scaffolds were porous in structure, and the pore size was measured to be 74 ± 4, 55 ± 6, and 46 ± 5 μm for -20, -40, and -80 °C scaffolds. The pores were larger in scaffolds processed at -20 °C compared to -40 and -80 °C, indicating the reduction in pore size of the scaffolds with a decrease in freezing temperature. The cytocompatibility, cell proliferation, and differentiation in C3CA scaffolds were assessed with the Saos-2 osteoblast cell line. These scaffolds supported the proliferation and differentiation of Saos-2 cells with significant matrix mineralization in scaffolds processed at -40 °C. Subcutaneous implantation of C3CA scaffolds in the rat model was investigated for its ability of vascularization and new matrix tissue formation. The matrix formation was observed at the earliest of 14 days in the scaffolds when processed at -40 °C while it was observed only after 28 days of implantation with the scaffolds processed at -20 and -80 °C. These results suggest that the citric acid-cross-linked CMC scaffolds processed at -40 °C can be promising for bone tissue engineering application.

The useful agent to have an ideal biological scaffold

Tissue engineering which is applied in regenerative medicine has three basic components: cells, scaffolds and growth factors. This multidisciplinary field can regulate cell behaviors in different conditions using scaffolds and growth factors. Scaffolds perform this regulation with their structural, mechanical, functional and bioinductive properties and growth factors by attaching to and activating their receptors in cells. There are various types of biological extracellular matrix (ECM) and polymeric scaffolds in tissue engineering. Recently, many researchers have turned to using biological ECM rather than polymeric scaffolds because of its safety and growth factors. Therefore, selection the right scaffold with the best properties tailored to clinical use is an ideal way to regulate cell behaviors in order to repair or improve damaged tissue functions in regenerative medicine. In this review we first divided properties of biological scaffold into intrinsic and extrinsic elements and then explain the components of each element. Finally, the types of scaffold storage methods and their advantages and disadvantages are examined.

Hofmeister Effect-Assistant Fabrication of All-Natural Protein-based Porous Materials Templated from Pickering Emulsions

Porous materials derived from natural and biodegradable polymers have received growing interest. We demonstrate here an attractive method for the preparation of protein-based porous materials using emulsions stabilized by gliadin-chitosan hybrid particles (GCHPs) as the template, with the addition of gelatin and kosmotropic ions to improve the mechanical strength. The microstructure, mechanical properties, cytotoxicity, and fluid absorption behavior of porous materials were systematically investigated. This strategy facilitated the formation of porous materials with highly open and interconnected pore structure, which can be manipulated by altering the mass ratio of hexane or gelatin in the matrix. The Hofmeister effect resulted from kosmotropic ions greatly enhanced the Young's modulus and the compressive stress at 40% strain of porous materials from 0.56 to 6.84 MPa and 0.26 to 1.11 MPa, respectively. The developed all-natural porous materials were nontoxic to HaCaT cells; they also had excellent liquid (i.e., simulated body fluid and rabbit blood) absorption performance and advantages in resisting stress and maintaining geometry shape. The effects of different concentration amounts and type of salts in the Hofmeister series on the formation and performance of porous materials were also explored. Mechanical strength of porous materials was gradually enhanced when the (NH₄)₂SO₄ concentration increased from 0 to 35 wt %, and the other four kosmotropic salts, including Na₂S₂O₃, Na₂CO₃, NaH₂PO₄, and Na₂SO₄, also showed positive effects. This work opens a simple and feasible way to produce nontoxic and biodegradable porous materials with favorable mechanical strength and controllable pore structure. These materials have broad potential application in many fields involving biomedical and material science, such as cell culture, (bio)catalysis, and wound or bone defect healing.

A dual-phase scaffold produced by rotary jet spinning and electrospinning for tendon tissue engineering

Tendon is a highly hierarchical and oriented tissue that provides high mechanical strength. Tendon injuries lead to loss of function, disability, and a decrease in quality of life. The limited healing capacity of tendon tissue leads to scar tissue formation, which can affect mechanical strength and cause a re-tear. Tissue engineering can be the solution to achieving complete and proper healing of tendon. The developed constructs should be mechanically strong while maintaining a suitable environment for cell proliferation. In this study, a dual-phase fibrous scaffold was produced by combining fibrous mats produced by rotary jet spinning (RJS) and wet electrospinning (WES), with the intent of improving the healing capacity of the construct. Dual-phase scaffolds were formed from aligned poly(ϵ-caprolactone) (PCL) fibers (Shell) produced by RJS and randomly oriented PCL or PCL/gelatin fibers (Core) produced by WES systems. The scaffolds mimicked i) the repair phase of tendon healing, in which randomly-oriented collagen type III is deposited by randomly-oriented WES fibers and ii) the remodeling stage, in which aligned collagen type I fibers are deposited by aligned RJS fibers. In vitro studies showed that the presence of randomly-oriented core fibers inside the aligned PCL fiber shell of the dual-phase scaffold increased the initial attachment and viability of cells. Scanning electron microscopy and confocal microscopy analysis showed that the presence of aligned RJS fibers supported the elongation of cells through aligned fibers which improves tendon tissue healing by guiding oriented cell proliferation and extracellular matrix deposition. Tenogenic differentiation of human adipose-derived mesenchymal stem cells on scaffolds was studied when supplemented with growth differentiation factor 5 (GDF-5). GDF-5 treatment improved the viability, collagen type III deposition and scaffold penetration of human adipose derived stem cells. The developed FSPCL/ESPCL-Gel 3:1 scaffold (FS = centrifugal force spinning/RJS, ES = wet electrospinning, Gel = gelatin) sustained high mechanical strength, and improved cell viability and orientation while supporting tenogenic differentiation.

Chemical cross-linking on gelatin-hyaluronan loaded with hinokitiol for the preparation of guided tissue regeneration hydrogel membranes with antibacterial and biocompatible properties

The mechanical properties and structural stability of hydrogels and their performance in antidegradation can be enhanced by cross-linking them with N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC). However, residual EDC compromises the biocompatibility of cross-linked hydrogels and the formability of un-cross-linked hydrogels. In this study, a facile process for preparing hydrogel regenerative membranes exerting antibacterial effects and containing gelatin/hyaluronic acid (G/HA) through solution casting was proposed. The membranes were cross-linked with EDC (G/HA-Ec-0H) and impregnated with two concentrations of the antibacterial agent of hinokitiol (G/HA-Ec-2H and G/HA-Ec-4H). Amide bonds formed, and the rate of active amino acid fixation was higher than 90%, which was directly proportional to the degree of cross-linking. The G/HA-Ec-2H and G/HA-Ec-4H groups with hinokitiol showed good antibacterial properties. The rate of hydrogel degradation decreased, and the integrity of sample morphology was maintained at more than 80% for over 3 days in the immersion. Then, the hydrogel structures relaxed and disintegrated through a rapid degradation reaction within 24 h. The biocompatibility results showed that low concentrations of hinokitiol did not affect cell viability. Moreover, hydrogel membranes after 14 days of cell incubation showed good cell adhesion and proliferation. In summary, the membrane biostability of the cross-linked gelatin/hyaluronan hydrogels was enhanced by EDC at a biocompatible concentration, and the functionalized group of G/HA-Ec-2H shows potential as a biodegradable material for biocompatible tissue-guarded regeneration membranes with antibacterial properties.

Crosslinked Hyaluronic Acid Gels with Blood-Derived Protein Components for Soft Tissue Regeneration

Hyaluronic acid (HA) is an ideal initial material for preparing hydrogels, which may be used as scaffolds in soft tissue engineering based on their advantageous physical and biological properties. In this study, two crosslinking agents, divinyl sulfone (DVS) and butanediol diglycidyl ether, were used to investigate their effect on the properties of HA hydrogels. As HA hydrogels alone do not promote cell adhesion on the scaffold, fibrin and serum from platelet-rich fibrin (SPRF) were combined with the scaffold; the aim was to create a material intended to be used as soft tissue implant that facilitates new tissue formation, and degrades over time. The chemical changes were characterized and cell attachment capacity of the protein-containing gels was examined using human mesenchymal stem cells, and viability was assessed using live-dead staining. Fourier-transform infrared measurements revealed that linking fibrin into the gel was more effective than linking SPRF. The scaffolds were found to be able to support cell adherence onto the hydrogels, and the best result was achieved when HA was crosslinked with DVS and contained fibrin. The most promising derivative, 5% DVS-crosslinked fibrin-containing hydrogel, was injected subcutaneously into C57BL/6 mice for 12 weeks. The scaffold was proven to be biocompatible, remodeling, and vascularization occurred, while shape and integrity were maintained. Impact statement Fibrin was combined with crosslinked hyaluronic acid (HA) for regenerative application, the structure of the combination of crosslinked HA with blood-derived protein was analyzed and effective coating was proven. It was observed that the fibrin content led to better mesenchymal stem cell attachment in vitro. The compositions showed biocompatibility, connective tissue and vascularization took place when implanted in vivo. Thus, a biocompatible, injectable gel was produced, which is a potential candidate for soft tissue implantation.

Fabrication and characterisation of super-paramagnetic responsive PLGA-gelatine-magnetite scaffolds with the unidirectional porous structure: a physicochemical, mechanical, and in vitro evaluation

Architecture and composition of Scaffolds are influential factors in the regeneration of defects. Herein, synthesised iron oxide (magnetite) nanoparticles (MNPs) by co-precipitation technique were evenly distributed in polylactic-co-glycolic acid (PLGA)-gelatine Scaffolds. Hybrid structures were fabricated by freeze-casting method to the creation of a matrix with tunable pores. The synthesised MNPs were characterised by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy, and vibrating sample magnetometer analysis. Scanning electron microscopy micrographs of porous Scaffolds confirmed the formation of unidirectional microstructure, so that pore size measurement indicated the orientation of pores in the direction of solvent solidification. The addition of MNPs to the PLGA-gelatine Scaffolds had no particular effect on the morphology of the pores, but reduced slightly pore size distribution. The MNPs contained constructs demonstrated increased mechanical strength, but a reduced absorption capacity and biodegradation ratio. Stability of the MNPs and lack of iron release was the point of strength in this investigation and were determined by atomic absorption spectroscopy. The evolution of rat bone marrow mesenchymal stem cells performance on the hybrid structure under a static magnetic field indicated the potential of super-paramagnetic constructs for further pre-clinical and clinical studies in the field of neural regeneration.

Preparation and Characterization of Electrospun Gelatin Nanofibers for Use as Nonaqueous Electrolyte in Electric Double-Layer Capacitor

A novel nanofibrous gel electrolyte was prepared via gelatin electrospinning for use as a nonaqueous electrolyte in electric double-layer capacitors (EDLCs). An electrospinning technique with a 25 wt% gelatin solution was applied to produce gelatin electrospun (GES) nanofiber electrolytes. Structural analysis of the GES products showed a clearly nanofibrous structure with fiber diameters in the 306.2–428.4 nm range and exhibiting high thermal stability, high tensile strength, and a stable form of nanofibrous structure after immersion in 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4). After testing over a range of spinning times, GES electrolytes that were produced at 25 min (GES-25) had a suitable thickness for the assembly of EDLC with the optimized tensile properties and were used to fabricate EDLC test cells with EMImBF4. These test cells were compared to those with pure EMImBF4 and a separator as an electrolyte. The electrochemical properties of the test cells were characterized by charge-discharge testing, discharge capacitance, and alternative current (AC) impedance measurements. AC impedance measurements showed that the test cell with the GES-25/EMImBF4 gel electrolyte showed slightly poorer contact with the electrode when compared to that with pure EMImBF4, whereas exhibited comparable IR drop and discharge capacitance (calculated capacitance retention was 56.6%). The results demonstrated that this novel gel electrolyte can be used as a nonaqueous electrolyte in order to improve the safety in EDLCs.

Preparation and properties of cellulose nanocrystals, gelatin, hyaluronic acid composite hydrogel as wound dressing

Gelatin (GA), hyaluronic acid (HA) and cellulose nanocrystals (CNC) are promising materials for skin wound care. In this study the GA-HA-CNC hydrogels were prepared by cross-linking and freeze-drying. The composition and mechanism of GA-HA-CNC hydrogels were confirmed by FTIR. The morphology and pore size were obtained by SEM. We accessed the physical property from rheological results and swelling ratio. NIH-3T3 cells were inoculated into the hydrogels and cultured for different days, then we analyzed the cytotoxicity of the prepared hydrogels by CCK-8 methods and live/dead pictorial diagram using staining kits. FTIR revealed the combination between GA, HA and CNC was attributed to the amide bond and hydrogen bonding. SEM results showed that the drying GA-HA-CNC hydrogels were spongy, with the pore diameter about 80-120 µm. CNC significantly enhanced the property of the hydrogels and play a vital role according to the rheology and swelling results. The cells culture results showed that NIH-3T3 cells can attached to, grow, and proliferate well on the GA-HA-CNC hydrogels. In conclusion, the natural GA-HA-CNC hydrogel has great potential for the skin wound repair.

Immobilization of type I collagen/hyaluronic acid multilayer coating on enoxacin loaded titania nanotubes for improved osteogenesis and osseointegration in ovariectomized rats

Titania nanotubes (Ti-NTs) have been proven to be good drug carriers and can release drugs efficiently around implants. Enoxacin (EN) is a broad-spectrum antibiotic that has the ability of anti-osteoclastogenesis. Immobilization of extracellular matrix components on the surface of the material can greatly enhance the biological activity of the implant and slow down the release rate of the drug in Ti-NTs. In the present study, a material system that provided uniform drug release, promoted osteogenesis, and inhibited osteoclast was designed and developed. Scanning electron microscopy, X-ray photoelectron spectroscopy, and water contact angle measurements were used for material surface characterization. Enoxacin release was detected by high performance liquid chromatography. Alkaline phosphatase and Alizarin Red staining were used to evaluate the osteogenic differentiation of rat bone marrow mesenchymal stem cells. Tartrate-resistant acid phosphatase staining and bone absorption assay were applied to osteoclastogenesis experiments. A drug delivery system based on Ti-NTs and type I collagen /hyaluronic acid multilayer coating (Ti-NT+EN+Col/HyA) with predominant biocompatibility, osteogenic property, and anti-osteoclastogenesis ability was successfully constructed. These excellent biological properties were further validated in an ovariectomized rat model. The results of the study indicate that Ti-NT+EN+Col/HyA is a potential material for future orthopedic implants.

On-Demand Microwave-Assisted Fabrication of Gelatin Foams

Ultraporous gelatin foams (porosity >94%, ρ ≈ 0.039–0.056 g/cm³) have been fabricated via microwave radiation. The resulting foam structures are unique with regard to pore morphology (i.e., closed-cell) and exhibit 100% macroporosity (pore size 332 to 1700 μm), presence of an external skin, and densities similar to aerogels. Results indicate that the primary foaming mechanism is governed by the vaporization of water that is tightly bound in secondary structures (i.e., helices, β-turns, β-sheets) that are present in dehydrated gelatin films but not present in the foams after microwave radiation (700 Watts).

A novel hybrid multichannel biphasic calcium phosphate granule-based composite scaffold for cartilage tissue regeneration

The objective of the present study was to develop a novel hybrid multichannel biphasic calcium phosphate granule (MCG)-based composite system for cartilage regeneration. First, hyaluronic acid-gelatin (HG) hydrogel was coated onto MCG matrix (MCG-HG). Poly(lactic-co-glycolic acid) (PLGA) microspheres was separately prepared and modified with polydopamine subsequent to BMP-7 loading (B). The surface-modified microspheres were finally embedded into MCG-HG scaffold to develop the novel hybrid (MCG-HG-PLGA-PD-B) composite system. The newly developed MCG-HG-PLGA-PD-B composite was then subjected to scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier Transform infrared spectroscopy, porosity, compressive strength, swelling, BMP-7 release and in-vitro biocompatibility studies. Results showed that 60% of BMP-7 retained on the granular surface after 28 days. A hybrid MCG-HG-PLGA-PD-B composite scaffold exhibited higher swelling and compressive strength compared to MCG-HG or MCG. In-vitro studies showed that MCG-HG-PLGA-PD-B had improved cell viability and cell proliferation for both MC3T3-E1 pre-osteoblasts and ATDC5 pre-chondrocytes cell line with respect to MCG-HG or MCG scaffold. Our results suggest that a hybrid MCG-HG-PLGA-PD-B composite scaffold can be a promising candidate for cartilage regeneration applications.

A gelatin composite scaffold strengthened by drug-loaded halloysite nanotubes

Mechanical properties and anti-infection are two of the most concerned issues for artificial bone grafting materials. Bone regeneration porous scaffolds with sustained drug release were developed by freeze-drying the mixture of nanosized drug-loaded halloysite nanotubes (HNTs) and gelatin. The scaffolds showed porous structure and excellent biocompatibility. The mechanical properties of the obtained composite scaffolds were enhanced significantly by HNTs to >300%, comparing to those of gelatin scaffold, and match to those of natural cancellous bones. The ibuprofen-loaded HNTs incorporated in the scaffolds allowed extended drug release over 100h, comparing to 8h when directly mixed the drug into the gelatin scaffold. The biological properties of the composite scaffolds were investigated by culturing MG63 cells on them. The HNTs/gelatin scaffolds with excellent mechanical properties and sustained drug release could be a promising artificial bone grating material.

Superabsorbent 3D Scaffold Based on Electrospun Nanofibers for Cartilage Tissue Engineering

Electrospun nanofibers have been used for various biomedical applications. However, electrospinning commonly produces two-dimensional (2D) membranes, which limits the application of nanofibers for the 3D tissue engineering scaffold. In the present study, a porous 3D scaffold (3DS-1) based on electrospun gelatin/PLA nanofibers has been prepared for cartilage tissue regeneration. To further improve the repairing effect of cartilage, a modified scaffold (3DS-2) cross-linked with hyaluronic acid (HA) was also successfully fabricated. The nanofibrous structure, water absorption, and compressive mechanical properties of 3D scaffold were studied. Chondrocytes were cultured on 3D scaffold, and their viability and morphology were examined. 3D scaffolds were also subjected to an in vivo cartilage regeneration study on rabbits using an articular cartilage injury model. The results indicated that 3DS-1 and 3DS-2 exhibited superabsorbent property and excellent cytocompatibility. Both these scaffolds present elastic property in the wet state. An in vivo study showed that 3DS-2 could enhance the repair of cartilage. The present 3D nanofibrous scaffold (3DS-2) would be promising for cartilage tissue engineering application.

Co-assembly of chitosan and phospholipids into hybrid hydrogels

Novel hybrid hydrogels were formed by adding chitosan (Ch) to phospholipids (P) self-assembled particles in lactic acid. The effect of the phospholipid concentration on the hydrogel properties was investigated and was observed to affect the rate of hydrogel formation and viscoelastic properties. A lower concentration of phospholipids (0.5% wt/v) in the mixture, facilitates faster network formation as observed by Dynamic Light Scattering, with lower elastic modulus than the hydrogels formed with higher phospholipid content. The nano-porous structure of Ch/P hydrogels, with a diameter of 260±20 nm, as observed by cryo-scanning electron microscopy, facilitated the penetration of water and swelling. Cell studies revealed suitable biocompatibility of the Ch/P hydrogels that can be used within life sciences applications.