Immobilization of thermoalkalophilic recombinant esterase enzyme by entrapment in silicate coated Ca-alginate beads and its hydrolytic properties

Selective recovery of esterase from Trichoderma harzianum through adsorption: Insights on enzymatic catalysis, adsorption isotherms and kinetics

In recent years, numerous attempts have been made to develop a low-cost adsorbent for selectively recovering industrially important products from fermentation broth or complex mixtures. The current study is a novel attempt to selectively adsorb esterase from Trichoderma harzianum using cheap adsorbents like bentonite (BT), activated charcoal (AC), silicon dioxide (SiO2), and titanium dioxide (TiO2). AC had the highest esterase adsorption of 97.58% due to its larger surface area of 594.45 m3/g. SiO2 was found to have the highest selectivity over esterase, with an estimated purification fold of 7.2. Interestingly, the purification fold of 5.5 was found in the BT-extracted fermentation broth. The functional (FT-IR) and morphological analysis (SEM-EDX) were used to characterize the adsorption of esterase. Esterase adsorption on AC, SiO2, and TiO2 was well fitted by Freundlich isotherm, demonstrating multilayer adsorption of esterase. A pseudo-second-order kinetic model was developed for esterase adsorption in various adsorbents. Thermodynamic analysis revealed that adsorption is an endothermic process. AC has the lowest Gibbs free energy of -10.96 kJ/mol, which supports the spontaneous maximum adsorption of both esterase and protein. In the desorption study, the maximum recovery of esterase from TiO2 using sodium chloride was 41.34 %. Unlike other adsorbents, the AC-adsorbed esterase maintained its catalytic activity and stability, implying that it could be used as an immobilization system for commercial applications. According to the kinetic analysis, the overall rate of the reaction was controlled by reaction kinetics rather than external mass transfer resistance, as indicated by the Damkohler number.

Catalase immobilization: Current knowledge, key insights, applications, and future prospects - A review

Catalase (CAT), a ubiquitous enzyme in all oxygen-exposed organisms, effectively decomposes hydrogen peroxide (H2O2), a harmful by-product, into water and oxygen, mitigating oxidative stress and cellular damage, safeguarding cellular organelles and tissues. Therefore, CAT plays a crucial role in maintaining cellular homeostasis and function. Owing to its pivotal role, CAT has garnered considerable interest. However, many challenges arise when used, especially in multiple practical processes. "Immobilization", a widely-used technique, can help improve enzyme properties. CAT immobilization offers numerous advantages, including enhanced stability, reusability, and facilitated downstream processing. This review presents a comprehensive overview of CAT immobilization. It starts with discussing various immobilization mechanisms, support materials, advantages, drawbacks, and factors influencing the performance of immobilized CAT. Moreover, the review explores the application of the immobilized CAT in various industries and its prospects, highlighting its essential role in diverse fields and stimulating further research and investigation. Furthermore, the review highlights some of the world's leading companies in the field of the CAT industry and their substantial potential for economic contribution. This review aims to serve as a discerning, source of information for researchers seeking a comprehensive cutting-edge overview of this rapidly evolving field and have been overwhelmed by the size of publications.

Efficient production of inositol from glucose via a tri-enzymatic cascade pathway

Inositol is an essential intermediate in cosmetics, food, medicine and other industries. However, developing an efficient biotransformation system for large-scale production of inositol remains challenging. Herein, a tri-enzymatic cascade route with three novel enzymes including polyphosphate glucokinase (PPGK) from Thermobifida fusca, inositol 3-phosphate synthase (IPS) from Archaeoglobus profundus DSM 5631 and inositol monophosphatase (IMP) from Thermotoga petrophila RKU-1 was designed and reconstructed for the production of inositol from glucose. The problem of poor cooperativity of the cascade reactions was addressed by ribosome binding site (RBS) optimization of PPGK and replication of IPS. Under the optimum biotransformation conditions, the engineered whole-cell immobilized with colloidal chitin transformed 120 g/L glucose to 110.8 g/L inositol with 92.3% conversion in four cycles of reuse, representing the highest titer of inositol to date. Furthermore, this is the first study for inositol production using a three-enzyme coordinated immobilized single-cell.

Facile immobilization of his-tagged Microbacterial esterase on Ni-SBA-15 with enhanced stability for efficient synthesis of key chiral intermediate of d-biotin

A series of nickel-incorporated SBA-15 mesoporous molecular sieves (Ni-SBA-15) were prepared as support for the immobilization of his-tagged recombinant Microbacterium esterase. The Ni-SBA-15 could strongly and specific absorb the his-tagged esterase from cell disrupted supernatant. It was found that the nickel amount in Ni-SBA-15 has dramatic influence on the activity and thermo-stability of immobilized enzyme, while the kinds of nickel precursor had little effect on enzyme stability. The morphology, chemical composition and structure of the best support NiCl₂-SBA-15 (Ni-SBA-15 prepared from NiCl₂ precursor) were characterized by various spectroscopy techniques. The immobilized esterase retained full activity of free esterase and showed high immobilized yield (> 90%) with higher thermo-stability, pH stability and organic solvent resistance compared with free enzyme. The optimum reaction temperature increased from 35 to 40 °C and the optimal reaction pH moved from 10.0 to 8.0 after enzyme immobilization. The immobilized esterase exhibited excellent storage stability and keeping 92% of the initial activity after 30 days' storage at 25 °C. In addition, the immobilized esterase had excellent reusability for the synthesis of key chiral intermediate of d-biotin and the substrate conversion could still keep 100% after 13 cycles continuously. Finally, optical pure (4S, 5R)-hemiester was obtained in 80.8% isolated yield and 99% purity in the gram preparative scale.

Enhanced thermostability of the immobilized thermoalkalophilic esterase onto magnetic-cornstarch nanoparticle

The immobilization of the biocatalysts onto magnetic nanoparticles has been extensively applied as the external magnetic field facilitates the enzyme recovery from the reaction mixture. In the present study, glutaraldehyde-modified magnetite-cornstarch nanoparticles (MCNs) were successfully synthesized, elaborately characterized by ZetaSizer and surface-enhanced Raman spectroscopy, and used for the immobilization of a thermoalkalophilic esterase from Geobacillus sp. The optimal immobilization conditions were obtained at 65°C, 2:3 molar ratios of Fe²⁺ :Fe³⁺ , and 1 g cornstarch resulted in approximately 90 nm magnetic particles in size. Also, immobilization yield and immobilization efficiency of the esterase were found as 74% and 82%, respectively. Scanning electron microscopy micrographs showed that MCNs were uniform, spherical in shape, and well dispersed and esterase immobilized MCNs displayed similar morphology as free MCNs. The maximum activity of free and immobilized esterase was obtained at 65°C and pH 9. Immobilization onto glutaraldehyde-modified MCNs significantly enhanced the esterase thermostability. Additionally, the immobilized esterase kept its residual activity of 75% after three sequential cycles, suggesting that it has favorable operational stability.

Immobilized GDEst-95, GDEst-lip and GD-95RM lipolytic enzymes for continuous flow hydrolysis and transesterification reactions

In this study lipolytic biocatalysts GD-95RM, GDEst-95 and GDEst-lip were immobilized by encapsulation in calcium alginate beads_. All three immobilized biocatalysts demonstrated significantly increased thermal stability at 60-70 °C temperatures and the activity of GD-95RM lipase increased by 50% at 70-80 °C following the immobilization. Moreover, encapsulated GDEst-95 esterase retained higher than 50% lipolytic activity after 3 months of incubation with butanol (25%) and ethanol (50%); GDEst-lip enzyme possessed 50% activity after 2 months of treatment with ethanol (25%) and methanol (25%); and GD-95RM lipase displayed higher that 50% activity after two-week incubation with methanol (50%). All three immobilized enzymes displayed long-term storage capability (>50% activity) at least until 3 months at 4 °C. It was also detected that immobilized GD-95RM and GDEst-lip can perform flow hydrolysis of both avocado oil and p-NP dodecanoate in prototype packed-bed column reactor. The analysis of continuous transesterification of avocado or sunflower oil with ethanol or methanol as substrates confirmed that encapsulated GD-95RM and GDEst-lip enzymes is a useful approach to produce fatty acid alkyl esters.

Esterase is a powerful tool for the biodegradation of pyrethroid insecticides

Agricultural and household applications of pyrethroid insecticides have significantly increased residual concentrations in living cells and environments. The enhanced concentration is toxic for living beings. Pyrethroid hydrolase enzyme (pyrethroid catalyzing esterase) regulates pyrethroid degradation, and has been well reported in various organisms (bacteria, fungi, insects and animals). Hydrolysis mechanisms of these esterases are different from others and properly function at factors viz., optimum temperature, pH and physicochemical environment. Active site of the enzyme contains common amino acids that play important role in pyrethroid catalysis. Immobilization technology emphasizes the development of better reusable efficiency of pyrethroid hydrolases to carry out large-scale applications for complete degradation of pyrethroids from the environments. In this review we have attempted to provide insights of pyrethroid-degrading esterases in different living systems along with complete mechanisms.

Facile preparation of aminosilane-alginate hybrid beads for enzyme immobilization: Kinetics and equilibrium studies

A simple, facile and potential platform for enzyme immobilization using alginate-based beads has been demonstrated by simultaneous gelation and modification of alginate using calcium chloride (CaCl₂) and 3-aminopropyltriethoxysilane (APTES). In this method, sodium alginate solution containing enzyme was simply dripped into a crosslinker solution containing CaCl₂ and APTES, leading to the formation of APTES-alginate hybrid beads (AP-beads). The optical observation, FT-IR analysis and amino group measurements provided evidence that APTES was successfully adsorbed to the alginate chain via electrostatic interaction. On the assumption that the binding of Ca²⁺ ion to polymannuronate residues of alginate via bidentate bridging coordination is competitive with APTES, the equilibrium isotherm and kinetics for the adsorption of APTES to AP-beads was found to follow extended Langmuir isotherm in binary system. Formate dehydrogenase (FDH) as a model enzyme was successfully immobilized in AP-beads and the immobilization yield of ca. 100% could be achieved under optimal conditions of CaCl₂ and APTES concentrations in crosslinker solution. Furthermore, the AP-beads were reused efficiently for 9 cycles without loss of FDH activity. The above results demonstrated that AP-beads were effective support for enzyme immobilization.

Affinity Immobilization of a Bacterial Prolidase onto Metal-Ion-Chelated Magnetic Nanoparticles for the Hydrolysis of Organophosphorus Compounds

In this study, silica-coated magnetic nanoparticles (SiMNPs) with isocyanatopropyltriethoxysilane as a metal-chelating ligand were prepared for the immobilization of His6-tagged Escherichia coli prolidase (His6-EcPepQ). Under one-hour coupling, the enzyme-loading capacity for the Ni2+-functionalized SiMNPs (NiNTASiMNPs) was 1.5 mg/mg support, corresponding to about 58.6% recovery of the initial activity. Native and enzyme-bound NiNTASiMNPs were subsequently characterized by transmission electron microscopy (TEM), superparamagnetic analysis, X-ray diffraction, and Fourier transform infrared (FTIR) spectroscopy. As compared to free enzyme, His6-EcPepQ@NiNTASiMNPs had significantly higher activity at 70 °C and pH ranges of 5.5 to 10, and exhibited a greater stability during a storage period of 60 days and could be recycled 20 times with approximately 80% retention of the initial activity. The immobilized enzyme was further applied in the hydrolysis of two different organophosphorus compounds, dimethyl p-nitrophenyl phosphate (methyl paraoxon) and diethyl p-nitrophenyl phosphate (ethyl paraoxon). The experimental results showed that methyl paraoxon was a preferred substrate for His6-EcPepQ and the kinetic behavior of free and immobilized enzymes towards this substance was obviously different. Taken together, the immobilization strategy surely provides an efficient means to deposit active enzymes onto NiNTASiMNPs for His6-EcPepQ-mediated biocatalysis.

Enhancing the stability of a carboxylesterase by entrapment in chitosan coated alginate beads

A carboxylesterase isolated from Aeromonas caviae MTCC 7725 was immobilized by entrapping it in chitosan coated calcium alginate beads. This was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FTIR). The activity of the native and immobilized enzyme was measured at various temperatures, pH levels, and organic solvents. The optimum temperature for activity of the native enzyme was found to be 40 °C and this increased to 50 °C on immobilization. The immobilized enzyme showed enhanced stability and high residual activity in various organic solvents as compared to the free enzyme. An environmentally benign approach was used for the synthesis of ethyl salicylate using the immobilized enzyme. The product obtained was confirmed by GC-MS. The kinetic parameters, such as K m and Vmax, were also determined for the native and immobilized enzyme. The immobilized enzyme retained 50% of its activity after vfie cycles. The immobilized enzyme retained 80% and 40% of its activity at 4 °C and at 37 °C, respectively, at the end of 40 days. The results obtained from our study show that the immobilized enzyme can serve as a robust catalyst for industrial applications.

Design, characterisation and application of alginate-based encapsulated pig liver esterase

Encapsulation of hydrolases in biopolymer-based hydrogels often suffers from low activities and encapsulation efficiencies along with high leaching and unsatisfactory recycling properties. Exemplified for the encapsulation of pig liver esterase the coating of alginate and chitosan beads have been studied by creating various biopolymer hydrogel beads. Enzyme activity and encapsulation efficiency were notably enhanced by chitosan coating of alginate beads while leaching remained nearly unchanged. This was caused by the enzymatic reaction acidifying the matrix, which increased enzyme retention through enhanced electrostatic enzyme-alginate interaction but decreased activity through enzyme deactivation. A practical and ready-to-use method for visualising pH in beads during reaction by co-encapsulation of a conventional pH indicator was also found. Our method proves that pH control inside the beads can only be realised by buffering. The resulting beads provided a specific activity of 0.267 μmol ∙ min^-1 ∙ mg^-1, effectiveness factor 0.88, encapsulation efficiency of 88%, 5% leaching and good recycling properties. This work will contribute towards better understanding and application of encapsulated hydrolases for enzymatic syntheses.

A novel recycling system for nano-magnetic molecular imprinting immobilised cellulases: Synergistic recovery of anthocyanin from fruit and vegetable waste

Fruit and vegetable waste (FVW) is become a serious problem in developing countries. Enzymolysis is a potentially useful method for the treatment of FVW. In the present study, novel recycled magnetic molecular imprinting immobilised cellulases were prepared based on magnetic modified chitosan (MCTS) and Fe₃O₄. The properties of obtained were characterised by IR and grain-size measurements. Evaluation of a single factor affecting the loading efficiency of supports and the mixed immobilised enzymes showed better capacity than single immobilised, or free, enzymes. The immobilisation process could improve cellulase stability and repeatability of the method. Meanwhile, the kinetic parameters were also verified. The immobilised enzymes retained most of their capacity after 60days' storage while free enzymes lost it within 30days. Tests showed that the immobilised enzymes developed excellent capacity and five anthocyanins were collected.

Improved stability and enhanced efficiency to degrade chlorimuron-ethyl by the entrapment of esterase SulE in cross-linked poly (γ-glutamic acid)/gelatin hydrogel

Free enzymes often undergo some problems such as easy deactivation, low stability, and less recycling in biodegradation processes, especially in soil condition. A novel esterase SulE, which is responsible for primary degradation of a wide range of sulfonylurea herbicides by methyl or ethyl ester de-esterification, was expressed by strain Hansschlegelia sp. CHL1 and entrapped for the first time in an environment-friendly, biocompatible and biodegradable cross-linked poly (γ-glutamic acid)/gelatin hydrogel (CPE). The activity and stability of CPE-SulE were compared with free SulE under varying pH and temperature condition by measuring chlorimuron-ethyl residue. Meanwhile, the three-dimensional network of CPE-SulE was verified by scanning electron microscopy (SEM). The results showed that CPE-SulE obviously improved thermostability, pH stability and reusability compared with free SulE. Furthermore, CPE-SulE enhanced degrading efficiency of chlorimuron-ethyl in both soil and water system, especially in acid environment. The characteristics of CPE-SulE suggested the great potential to remediate chlorimuron-ethyl contaminated soils in situ.

CRGO/alginate microbeads: an enzyme immobilization system and its potential application for a continuous enzymatic reaction

Hybrid bio-inorganic microbeads composed of CRGO–enzyme and alginate exhibited better stability and higher environmental tolerance, which can be used in a continuous fixed-bed enzymatic reaction.

The removal of fluoranthene by Agaricus bisporus immobilized in Ca-alginate modified by Lentinus edodes nanoparticles

Fruiting bodies of Agaricus bisporus (A. bisporus) were entrapped in Ca-alginate modified by Lentinus edodes nanoparticles (CA-LENP) to adsorb and biodegrade fluoranthene (FLU) efficiently from an aqueous solution in a fluidized bed bioreactor.

Encapsulation of Multi-Enzymes on Waste Clay Material: Preparation, Characterization and Application for Tapioca Starch Hydrolysis

Alpha-amylase, glucoamylase and cellulase were immobilized onto calcium alginate-waste clay (alg-WC) beads by using encapsulation technique. The clay was obtained from palm oil mill clay bath processing waste that was collected from FELDA Serting Hilir Palm Oil Mill, Malaysia. The aim of this study is to characterize and investigate the performance of waste clay as a supporting material for the tapioca starch hydrolysis. The encapsulated enzymes were characterized by using analytical equipment such as Fourier Transform Infrared Spectroscopy (FTIR) and Field Emission Scanning Electron Microscopy (FESEM). The FTIR results showed the interaction of functional groups between alginate and waste clay in the alg-WC beads. The alginate beads characterized at peaks 1615 cm-1, 1417 cm-1and 1027 cm-1, and peaks 1396 cm-1, 873 cm-1and 712 cm-1characterized the waste clay. The FESEM analysis also revealed that the different surface morphology of alginate beads and alg-WC beads. It also showed that the enzymes were successfully encapsulated within the alg-WC beads. The activity of the immobilized enzymes was studied at different clay concentrations. The highest immobilization yield was obtained at 2% (w/v) of clay concentration and the highest enzyme loading was 98.29 %. The immobilized enzymes also retained 33% of its activity after seven usage cycle with 1 hour of each reaction time.

Entrapment of methyl parathion hydrolase in cross-linked poly(γ-glutamic acid)/gelatin hydrogel

Methyl parathion hydrolase (MPH) is an important enzyme in hydrolyzing toxic organophosphorus (OP) compounds. However, MPH is easily deactivated when subjected to extreme environmental conditions and is difficult to recover from the reaction system for reuse, thereby limiting its practical application. To address these shortcomings, we examined the entrapment of MPH in an environment-friendly, biocompatible and biodegradable cross-linked poly(γ-glutamic acid)/gelatin hydrogel. The cross-linked poly(γ-glutamic acid)/gelatin hydrogels were prepared with different gelatin/poly(γ-glutamic acid) mass ratios using water-soluble carbodiimide as the cross-linking agent. The MPH-entrapped cross-linked poly(γ-glutamic acid)/gelatin hydrogel (CPE-MPH) not only possessed improved thermostability, pH stability, and reusability but also exhibited enhanced efficiency in hydrolyzing OP compounds. Furthermore, CPE-MPH possesses high water-absorbing and water-retaining capabilities. We believe that the cross-linked poly(γ-glutamic acid)/gelatin hydrogels are an attractive carrier for the entrapment of diverse enzymes, affording a new approach for enzyme entrapment.