Stabilization of antimicrobial silver nanoparticles by a polyhydroxyalkanoate obtained from mixed bacterial culture

Preparation of hybrid particles of Ag nanoparticles and eggshell calcium carbonate and their antimicrobial efficiency against beef-extracted bacteria

In this study, hybrid particles of AgNPs-loaded eggshell calcium carbonate (AgNPs/eCaCO₃) were prepared by co-precipitating the eggshell in the presence of freshly prepared AgNPs with a particle size of 10-30 nm. The hybrid particles were comparatively precipitated at 25°C and 35°C using poly (sodium 4-styrenesulfonate) as a polyelectrolyte. The AgNPs/eCaCO₃ particles prepared at 25°C had a spherical morphology with a mean diameter of 3.56 µm, and Brunauer-Emmett-Teller (BET) surface area of 85.08 m² g^-1. On the other hand, the particles prepared at 35°C had a broader size distribution with a mean diameter of 3.19 µm, and a BET surface area of 79.25 m² g^-1. AgNPs-loaded commercial calcium carbonate particles (AgNPs/CaCO₃) comparatively prepared at 35°C were perfectly spherical with a mean diameter of 5.61 µm. At preparing temperature of 25°C, the hybrid particles contain AgNPs of 0.78 wt% for AgNPs/eCaCO₃ and 3.20 wt% for AgNPs/CaCO₃. The AgNPs/eCaCO₃ and AgNPs/CaCO₃ particles exhibited the same efficiency against bacteria extracted from beef with an average inhibition zone diameter of 7-10 mm according to the modified Kirby-Bauer disc diffusion assay depending on their concentration and beef source. Freshly prepared silver colloids showed comparatively poorer antimicrobial efficiency.

Microbially Synthesized Polymer-Metal Nanoparticles Composites as Promising Wound Dressings to Overcome Methicillin-Resistance Staphylococcus aureus Infections

Antimicrobial resistance has been declared one of the top 10 global public health threats. Methicillin-resistant Staphylococcus aureus (MRSA) is a leading cause of recurring skin and soft tissue infections in patients with chronic skin conditions such as diabetic foot infections, making the treatment of the ulcers challenging. Wound dressings combined with metal nanoparticles have been suggested to prevent and treat MRSA-infected wounds. However, these particles are commonly synthesized by chemical approaches. In this study, we developed bio-based silver (Bio-AgNPs) and copper oxide nanoparticles (CuONPs) polymer composites using a microbially produced polyester from the Polyhydroxyalkanoates (PHAs) family. Poly(3-hydroxyoctanoate)-co-(3-hydroxyhexanoate) (PHO) was synthesized by Pseudomonas putida and functionalized in-situ with Bio-AgNPs or ex-situ with CuONPs. PHO-CuONPs films did not inhibit MRSA growth, while a reduction of 6.0 log CFU/mL was achieved with PHO-Bio-AgNPs synthesized from silver nitrate (AgNO₃) solution at 3.5 mM. Exposure of human fibroblast cells (HFF-1) to the bioactive films did not induce notable cytotoxicity and genotoxicity, as seen by a viability higher than 79% and no significant changes in basal DNA damage. However, exposure to PHO-Bio-AgNPs induced oxidative DNA damage in HFF-1 cells. No hemolytic potential was observed, while platelet aggregation was promoted and desired for wound healing. Here we demonstrate the biosynthesis of polymer-nanoparticle composites and their potential as bioactive films for MRSA treatment.

The Synthesis, Characterization and Applications of Polyhydroxyalkanoates (PHAs) and PHA-Based Nanoparticles

Polyhydroxyalkanoates (PHAs) are storage granules found in bacteria that are essentially hydroxy fatty acid polyesters. PHA molecules appear in variety of structures, and amongst all types of PHAs, polyhydroxybutyrate (PHB) is used in versatile fields as it is a biodegradable, biocompatible, and ecologically safe thermoplastic. The unique physicochemical characteristics of these PHAs have made them applicable in nanotechnology, tissue engineering, and other biomedical applications. In this review, the optimization, extraction, and characterization of PHAs are described. Their production and application in nanotechnology are also portrayed in this review, and the precise and various production methods of PHA-based nanoparticles, such as emulsion solvent diffusion, nanoprecipitation, and dialysis are discussed. The characterization techniques such as UV-Vis, FTIR, SEM, Zeta Potential, and XRD are also elaborated.

Silver Nanoparticle-Coated Polyhydroxyalkanoate Based Electrospun Fibers for Wound Dressing Applications

Wound dressings are high performance and high value products which can improve the regeneration of damaged skin. In these products, bioresorption and biocompatibility play a key role. The aim of this study is to provide progress in this area via nanofabrication and antimicrobial natural materials. Polyhydroxyalkanoates (PHAs) are a bio-based family of polymers that possess high biocompatibility and skin regenerative properties. In this study, a blend of poly(3-hydroxybutyrate) (P(3HB)) and poly(3-hydroxyoctanoate-co-3-hydroxy decanoate) (P(3HO-co-3HD)) was electrospun into P(3HB))/P(3HO-co-3HD) nanofibers to obtain materials with a high surface area and good handling performance. The nanofibers were then modified with silver nanoparticles (AgNPs) via the dip-coating method. The silver-containing nanofiber meshes showed good cytocompatibility and interesting immunomodulatory properties in vitro, together with the capability of stimulating the human beta defensin 2 and cytokeratin expression in human keratinocytes (HaCaT cells), which makes them promising materials for wound dressing applications.

A New Nanocomposite Packaging Based on LASiS-Generated AgNPs for the Preservation of Apple Juice

Designing bioactive materials, with controlled metal ion release, exerting a significant biological action and associated to low toxicity for humans, is nowadays one of the most important challenges for our community. The most looked-for nanoantimicrobials are capable of releasing metal species with defined kinetic profiles, either by slowing down or inhibiting bacterial growth and pathogenic microorganism diffusion. In this study, laser ablation synthesis in solution (LASiS) has been used to produce bioactive Ag-based nanocolloids, in isopropyl alcohol, which can be used as water-insoluble nano-reservoirs in composite materials like poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Infrared spectroscopy was used to evaluate the chemical state of pristine polymer and final composite material, thus providing useful information about synthesis processes, as well as storage and processing conditions. Transmission electron microscopy was exploited to study the morphology of nano-colloids, along with UV-Vis for bulk chemical characterization, highlighting the presence of spheroidal particles with average diameter around 12 nm. Electro-thermal atomic absorption spectroscopy was used to investigate metal ion release from Ag-modified products, showing a maximum release around 60 ppb, which ensures an efficient antimicrobial activity, being much lower than what recommended by health institutions. Analytical spectroscopy results were matched with bioactivity tests carried out on target microorganisms of food spoilage.

Biodegradable Antimicrobial Films for Food Packaging: Effect of Antimicrobials on Degradation

The environmental problem generated by the massive consumption of plastics makes necessary the developing of biodegradable antimicrobial materials that can extend food shelf-life without having a negative impact on the environment. The current situation regarding the availability of biodegradable food packaging materials has been analysed, as well as different studies where antimicrobial compounds have been incorporated into the polymer matrix to control the growth of pathogenic or spoilage bacteria. Thus, the antimicrobial activity of active films based on different biodegradable polymers and antimicrobial compounds has been discussed. Likewise, relevant information on biodegradation studies carried out with different biopolymers in different environments (compost, soil, aquatic), and the effect of some antimicrobials on this behavior, are reviewed. In most of the studies, no relevant effect of the incorporated antimicrobials on the degradation of the polymer were observed, but some antimicrobials can delay the process. The changes in biodegradation pattern due to the presence of the antimicrobial are attributed to its influence on the microorganism population responsible for the process. More studies are required to know the specific influence of the antimicrobial compounds on the biodegradation behavior of polymers in different environments. No studies have been carried out or marine media to this end.

Lignin from oil palm empty fruit bunches: Characterization, biological activities and application in green synthesis of silver nanoparticles

Lignin was extracted from oil palm empty fruit bunches under four different conditions. The lignin samples were characterized and employed in the green synthesis of silver nanoparticles. Two-dimensional HSQC NMR analysis showed that lignins extracted under more aggressive conditions (3.5% acid, 60 min) exhibited less signals and thus, presented a more degraded chemical structure. Additionally, those lignins obtained under harsh conditions (3.5% acid, 60 min) exhibited higher antioxidant capacity than those obtained under mild conditions (1.5% acid, 20 min). Formation of lignin-mediated silver nanoparticles was confirmed by color change during their synthesis. The surface plasmon resonance peaks (423-427 nm) in UV-visible spectra also confirmed the synthesis of AgNPs. AgNPs showed spherical shape, polycrystalline nature and average size between 18 and 20 nm. AgNPs, in suspension, presented a negative Zeta potential profile. Lignin was assumed to contribute in the antioxidant capacity exhibited by AgNPs. All AgNPs presented no significant differences on the disk diffusion antimicrobial susceptibility test against E. coli. The minimum inhibitory concentration of HAL3-L AgNPs (62.5 μg·mL^-1) was better than other physicochemically produced AgNPs (100 μg·mL^-1).

Innovative Therapeutic and Delivery Approaches Using Nanotechnology to Correct Splicing Defects Underlying Disease

Alternative splicing of pre-mRNA contributes strongly to the diversity of cell- and tissue-specific protein expression patterns. Global transcriptome analyses have suggested that >90% of human multiexon genes are alternatively spliced. Alterations in the splicing process cause missplicing events that lead to genetic diseases and pathologies, including various neurological disorders, cancers, and muscular dystrophies. In recent decades, research has helped to elucidate the mechanisms regulating alternative splicing and, in some cases, to reveal how dysregulation of these mechanisms leads to disease. The resulting knowledge has enabled the design of novel therapeutic strategies for correction of splicing-derived pathologies. In this review, we focus primarily on therapeutic approaches targeting splicing, and we highlight nanotechnology-based gene delivery applications that address the challenges and barriers facing nucleic acid-based therapeutics.

Fungicidal and anti-biofilm activities of trimethylchitosan-stabilized silver nanoparticles against Candida species in zebrafish embryos

Herein, positively surface-charged silver nanoparticles (AgNPs) capped with trimethylchitosan nitrate (TMCN) were synthesized using an environmentally friendly method. Nano-sized TMCN-AgNPs (~80 nm) with high zeta potential (>30 mV) provide sufficient static repulsion to stabilize colloid AgNPs in aqueous solutions without aggregation for >3 months. In in vitro cell cycle assays, TMCN-AgNPs showed low cytotoxicity towards L929 cells. A microdilution inhibition assay demonstrated the antifungal potential of TMCN-AgNPs, with a minimum inhibitory concentration of 0.06 mM against Candida tropicalis ATCC 750, and 0.46 mM against both Candida albicans ATCC 76615 and Candida glabrata ATCC 15545. Moreover, the addition of TMCN-AgNPs at 0.23 mM significantly reduced biofilm formation in 96-well plates with C. albicans and C. tropicalis. Importantly, when zebrafish eggs were infected with Candida cells, 0.23 mM TMCN-AgNPs greatly diminished the amount of biofilm on eggs and rescued the survival of embryos by up to 70%.

Oxygen-Scavenging Multilayered Biopapers Containing Palladium Nanoparticles Obtained by the Electrospinning Coating Technique

The main goal of this study was to obtain, for the first time, highly efficient water barrier and oxygen-scavenging multilayered electrospun biopaper coatings of biodegradable polymers over conventional cellulose paper, using the electrospinning coating technique. In order to do so, poly(3-hydroxybutyrate) (PHB) and polycaprolactone (PCL) polymer-containing palladium nanoparticles (PdNPs) were electrospun over paper, and the morphology, thermal properties, water vapor barrier, and oxygen absorption properties of nanocomposites and multilayers were investigated. In order to reduce the porosity, and to enhance the barrier properties and interlayer adhesion, the biopapers were annealed after electrospinning. A previous study showed that electrospun PHB-containing PdNP did show significant oxygen scavenging capacity, but this was strongly reduced after annealing, a process that is necessary to form a continuous film with the water barrier. The results in the current work indicate that the PdNP were better dispersed and distributed in the PCL matrix, as suggested by focus ion beam-scanning electron microscopy (FIB-SEM) experiments, and that the Pd enhanced, to some extent, the onset of PCL degradation. More importantly, the PCL/PdNP nanobiopaper exhibited much higher oxygen scavenging capacity than the homologous PHB/PdNP, due to most likely, the higher oxygen permeability of the PCL polymer and the somewhat higher dispersion of the Pd. The passive and active multilayered biopapers developed here may be of significant relevance to put forward the next generation of fully biodegradable barrier papers of interest in, for instance, food packaging.

PHBV/MWCNT Films: Hydrophobicity, Thermal and Mechanical Properties as a Function of MWCNT Concentration

The introduction of multi-walled carbon nanotubes (MWCNTs) into polymer matrixes has been an important tool to alter and improve some properties in polymer nanocomposites, including biodegradable polymers such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). In this work, PHBV nanocomposites with 0.05, 0.50, 1.00, 1.50 and 2.00 wt % of MWCNTs were produced by solvent casting. MWCNT morphology and structure were characterized by Raman spectroscopy, and transmission electron microscopy (TEM). It was observed that MWCNTs have a considerable amount of amorphous carbon (AC) onto their surface and a wide distribution of the tube diameter. MWCNTs act as the nucleating agent in the PHBV matrix, as verified by differential scanning calorimetry (DSC). Thermogravimetric analysis (TGA) showed that thermal stability was not significantly affected. The nanofiller dispersion into the PHBV matrix was not effective for concentrations from 1 wt % according to the micrographs obtained in scanning electron microscopy (SEM). The contact angle was changed with the introduction of MWCNTs, turning the nanocomposites hydrophobic and improving the mechanical tensile properties of the PHBV matrix.

Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate): Enhancement Strategies for Advanced Applications

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV, is a microbial biopolymer with excellent biocompatible and biodegradable properties that make it a potential candidate for substituting petroleum-derived polymers. However, it lacks mechanical strength, water sorption and diffusion, electrical and/or thermal properties, antimicrobial activity, wettability, biological properties, and porosity, among others, limiting its application. For this reason, many researchers around the world are currently working on how to overcome the drawbacks of this promising material. This review summarises the main advances achieved in this field so far, addressing most of the chemical and physical strategies to modify PHBV and placing particular emphasis on the combination of PHBV with other materials from a variety of different structures and properties, such as other polymers, natural fibres, carbon nanomaterials, nanocellulose, nanoclays, and nanometals, producing a wide range of composite biomaterials with increased potential applications. Finally, the most important methods to fabricate porous PHBV scaffolds for tissue engineering applications are presented. Even though great advances have been achieved so far, much research needs to be conducted still, in order to find new alternative enhancement strategies able to produce advanced PHBV-based materials able to overcome many of these challenges.

Production of polyhydroxybutyrates and carbohydrates in a mixed cyanobacterial culture: Effect of nutrients limitation and photoperiods

In the present study, different photoperiods and nutritional conditions were applied to a mixed wastewater-borne cyanobacterial culture in order to enhance the intracellular accumulation of polyhydroxybutyrates (PHBs) and carbohydrates. Two different experimental set-ups were used. In the first, the culture was permanently exposed to illumination, while in the second it was submitted to light/dark alternation (12 h cycles). In both cases, two different nutritional regimes were also evaluated, N-limitation and P-limitation. Results showed that the highest PHB concentration (104 mg L^-1) was achieved under P limited conditions and permanent illumination, whereas the highest carbohydrate concentration (838 mg L^-1) was obtained under N limited condition and light/dark alternation. With regard to bioplastics and biofuel generation, this study demonstrates that the accumulation of PHBs (bioplastics) and carbohydrates (potential biofuel substrate) is favored in wastewater-borne cyanobacteria under conditions where nutrients are limited.

Nanostructuring Biopolymers for Improved Food Quality and Safety

Food-grade biopolymers, apart from their inherent nutritional properties, can be tailored designed for improving food quality and safety, either serving as delivery vehicles for bioactive molecules, or as novel packaging components, not only improving the transport properties of biobased packaging structures, but also imparting active antibacterial and antiviral properties. In this chapter, the potential of different food-grade biopolymers (mainly proteins and carbohydrates but also some biopolyesters) to serve as encapsulating matrices for the protection of sensitive bioactives or as nanostructured packaging layers to improve transport properties and control the growth of pathogenic bacteria and viruses are described based on some developments carried out by the authors, as well as the most prominent works found in literature in this area.

On the Use of the Electrospinning Coating Technique to Produce Antimicrobial Polyhydroxyalkanoate Materials Containing In Situ-Stabilized Silver Nanoparticles

Electro-hydrodynamic processing, comprising electrospraying and electrospinning techniques, has emerged as a versatile technology to produce nanostructured fiber-based and particle-based materials. In this work, an antimicrobial active multilayer system comprising a commercial polyhydroxyalkanoate substrate (PHA) and an electrospun PHA coating containing in situ-stabilized silver nanoparticles (AgNPs) was successfully developed and characterized in terms of morphology, thermal, mechanical, and barrier properties. The obtained materials reduced the bacterial population of Salmonella enterica below the detection limits at very low silver loading of 0.002 ± 0.0005 wt %. As a result, this study provides an innovative route to generate fully renewable and biodegradable materials that could prevent microbial outbreaks in food packages and food contact surfaces.

pH-responsive release behavior and anti-bacterial activity of bacterial cellulose-silver nanocomposites

Bacterial cellulose (BC) has been extensively explored as some of the most promising biomaterials for biomedical applications due to their unique properties, such as high crystallinity, high mechanical strength, ultrafine fiber network structure, good water holding capacity and biocompatibility. However, BC is lack of anti-bacterial activity which is the main issue to be solved. In the study, BC-Ag nanocomposites were prepared in situ by introducing silver nanoparticles (AgNPs) into BC acting as the templates. The BC and as-prepared BC-Ag nanocomposites were characterized by several techniques including scanning electron microscope, Fourier transform infrared spectra, ultraviolet-visible absorption spectra, X-ray diffraction and thermogravimetric analyses. These results indicate AgNPs successfully impregnated into BC. The releases of Ag(+) at different pH values were studied, which showed pH-responsive release behaviors of BC-Ag nanocomposites. The anti-bacterial performances of BC-Ag nanocomposites were evaluated with Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 6538, Bacillus subtilis ATCC 9372 and Candida albicans CMCC(F) 98001, which frequently causes medical associated infections. The experimental results showed BC-Ag nanocomposites have excellent anti-bacterial activities, thus confirming its utility as potential wound dressings.

Poly(hydroxy alkanoate)s in Medical Applications

This review summarizes the state-of-the-art knowledge of the usage of poly(hydroxy alkanoate)s in medical and sanitary applications. Depending on the monomers incorporated into the polymers and copolymers, this class of polymers exhibits a broad range of (thermo-)plastic properties, enabling their processing by, e.g., solution casting or melt extrusion. In this review, strategies for the polymer analogous modification of these materials and their surfaces are highlighted and correlated with the potential applications of the corresponding materials and blends. While the commercial availability of purified PHAs is addressed in brief, special focus is put on the (bio-)degradability of these polymers and ways to influence the degradation mechanism and/or the duration of degradation.