Effects of dry method esterification of starch on the degradation characteristics of starch/polylactic acid composites

Biodegradable microplastics aging processes accelerated by returning straw in paddy soil

Biodegradable microplastics (MPs) have been released into agricultural soils and inevitably undergo various aging processes. Straw return is a popular agricultural management strategy in many countries. However, the effect of straw return on the aging process of biodegradable MPs in flooded paddy soil, which is crucial for studying the characteristics, fate, and environmental implications of biodegradable MPs, remains unclear. Here, we constructed a 180-day microcosm incubation to elucidate the aging mechanism of polylactic acid (PLA)-MPs in straw-enriched paddy soil. This study elucidated that the prominent aging characteristic of PLA-MPs occurred in the straw-enriched paddy soil, accompanied by increased chrominance (76.64-182.3 %), hydrophilicity (2.92-22.07 %), roughness (33.12-58.01 %), and biofilm formation (42.12-100.3 %) for the PLA-MPs, especially with 2 % (w/w) straw return treatment (P < 0.05). A 2 % straw return treatment has significantly impacted ester CO group changes in PLA-MPs, altered the MPs-attached soil bacterial communities composition, strengthened bacterial network structure, and increased soil proteinase K activity. The findings of this work demonstrated that flooded, straw-enriched paddy soil accelerated PLA-MPs aging affected by soil-water chemistry, soil microbe, and soil enzymatic. This study helps to deepen our understanding of the aging process of PLA-MPs in straw return paddy soil. ENVIRONMENTAL IMPLICATION: Microplastics (MPs) are emerging contaminants in the global soil and terrestrial ecosystems. Biodegradable MPs are more likely to be formed and released into agricultural soils during aging. Straw return is a popular agricultural management strategy in many countries. Considering the wide use of plastic film, sewage sludge, plastic-coated fertilizer, and organic fertilizer in agricultural ecosystems, it is crucial to pay attention to the aging process of biodegradable MPs in straw-enriched paddy soil, which has not been adequately emphasized. This aspect has been overlooked in previous studies and threatens ecosystems. This study demonstrated that straw-enriched paddy soil accelerated polylactic acid (PLA)-MPs aging influenced by the dissolved organic matter, microorganisms, and enzyme activity associated with straw decomposition.

The untold story of starch as a catalyst for organic reactions

Starch is one of the members of the polysaccharide family. This biopolymer has shown many potential applications in different fields such as catalytic reactions, water treatment, packaging, and food industries. In recent years, using starch as a catalyst has attracted much attention. From a catalytic point of view, starch can be used in organic chemistry reactions as a catalyst or catalyst support. Reports show that as a catalyst, simple starch can promote many heterocyclic compound reactions. On the other hand, functionalized starch is not only capable of advancing the synthesis of heterocycles but also is a good candidate catalyst for other reactions including oxidation and coupling reactions. This review tries to provide a fair survey of published organic reactions which include using starch as a catalyst or a part of the main catalyst. Therefore, the other types of starch applications are not the subject of this review.

Alkaline Hydrolysis of Waste Acrylic Fibers Using the Micro-Water Method and Its Application in Drilling Fluid Gel Systems

Filtrate reducer is a drilling fluid additive that can effectively control the filtration loss of drilling fluid to ensure the safe and efficient exploitation of oilfields. It is the most widely used treatment agent in oilfields. Due to its moderate conditions and controllable procedure, alkaline hydrolysis of high-purity waste polyacrylonitrile has been utilized for decades to produce filtrate reducer on a large scale in oilfields. However, the issues of long hydrolysis time, high viscosity of semi-finished products, high drying cost, and tail gas pollution have constrained the development of the industry. In this study, low-purity waste acrylic fiber was first separated and purified using high-temperature hydroplastization, and the hydrolyzed product was obtained using alkaline hydrolysis with the micro-water method, which was called MW-HPAN. The hydrolysis reaction was characterized using X-ray diffraction, scanning electron microscopy, infrared spectroscopy, and thermogravimetric analysis, and the elemental analysis showed a hydrolysis degree of 73.21%. The experimental results showed that after aging at 180 °C for 16 h, the filtration volume of the freshwater base slurry with 0.30% dosage and 4% brine base slurry with 1.20% dosage was 12.7 mL and 18.5 mL, respectively. The microstructure and particle size analysis of the drilling fluid gel system showed that MW-HPAN could prevent the agglomeration of clay and maintain a reasonable particle size distribution even under the combined deteriorating effect of high temperature and inorganic cations, thus forming a dense filter cake and achieving a low filtrate volume of the drilling fluid gel system. Compared with similar commercially available products, MW-HPAN has better resistance to temperature and salt in drilling fluid gel systems, and the novel preparation method is promising to be extended to practical production.

Weathering and degradation of polylactic acid masks in a simulated environment in the context of the COVID-19 pandemic and their effects on the growth of winter grazing ryegrass

The COVID-19 pandemic has led to explosive growth in the production and consumption of disposable medical masks, which has caused new global environmental problems due to the improper disposal of these masks and lack of effective mask recycling methods. To reduce the environmental load caused by the inability of synthetic plastics to degrade, polylactic acid (PLA) masks, as a biodegradable environmentally friendly plastic, may become a solution. This study simulated the actual degradation process of new PLA masks in different environments by soaking them in various solutions for 4 weeks and explored the influence of the treated PLA fabric fibers on the growth of winter ryegrass. The results show that the weathering degradation of PLA fibers in water mainly occurs through the hydrolysis of ester bonds, and weathering leads to cheese-like and gully-like erosion on the surface of the PLA fiber fabric layer and finally to fiber fracture and the release of microplastics (MPs). The average number of MPs released within 4 weeks is 149.5 items/piece, the particle size is 20-500 µm (44%), and 63.57% of the MPs are transparent fibers. The outer, middle, and inner layers of weathered PLA masks tend to be hydrophilic and have lower mechanical strength. PLA fibers after different treatment methods affect the growth of winter ryegrass. PLA masks are undoubtedly a greener choice than ordinary commercial masks, but in order to confirm this, the entire degradation process, the final products, and the impact on the environment need to be further studied. In the future, masks may be developed to be made from more environmentally friendly biodegradable materials that can have good protecting effects and also solve the problem of end-of-life recycling. A SYNOPSIS: Simulation of the actual degradation process of PLA masks and exploration of the influence of mask degradation on the growth of winter ryegrass.

Imaging moiety-directed co-assembly for biodegradation control with synchronous four-modal biotracking

The complexity of existing methods for biodegradation control limits the multi-functionality of biomedical materials. It is urgent to develop simple and straightforward strategies to control the biodegradation rate with precise tracking of various parameters in real-time. Here, we show an imaging moiety-directed co-assembly strategy, in which different imaging moieties bearing non-covalent interaction sites are covalently introduced into the poly (D,l-lactic acid) (PDLLA) chain as end groups, followed by alternate non-covalent interactions with polymer chains upon compression molding. This strategy takes advantage of a variety of bonding types (including CH-π, CH-F, etc.) to firmly integrate the PDLLA chains and strongly control the biodegradation rate, making the amorphous prototype degraded much slower than higher-molecular-weight counterparts, and the local inflammatory response is insignificant. On this basis, a synchronous four-modal (X-ray computed tomography + fluorescence + photoacoustics + ultrasound) imaging was achieved on the single entity in vivo, even within a millimeter-scale thick-skin tissue. These imaging signals can precisely correlate the multi parameter variation trend of material mass, volume and molecular weight, signifying that co-assembly can be utilized to develop advanced theranostic systems. SINGLE SENTENCE SUMMARY: We developed an imaging moiety-directed co-assembly strategy to control the biodegradation rate and achieve the synchronization of real-time four-modal imaging in vivo. These imaging signals can precisely correlate the multi-parameter variation trend of material mass, volume and molecular weight, which provided comprehensive biomedical information accessing both qualitatively and quantitatively.

Recent trends in the application of modified starch in the adsorption of heavy metals from water: A review

The presence of polyfunctional ligands on the bio-macromolecules acts as an efficient adsorbent for heavy metal ions. Starch is one of the most abundant, easily available and cheap biopolymer of plant origin. However, native starch exhibits significantly low adsorption capacity due to the absence of some essential functional groups like carboxyl, amino or ester groups and is thus modified using various reaction routes like grafting, cross-linking, esterification, oxidation and irradiation for addition of functional groups to increase its adsorption capacity. The present review provides a comprehensive discussion on the above mentioned modification schemes of starch over the last 10-15 years highlighting their preparation methods, physico-chemical characteristics along with their adsorption capacities and mechanisms of heavy metal ions from water.

Biodegradation study of PDLA/cellulose microfibres biocomposites by Pseudomonas aeruginosa

Aerobic biodegradation of biocomposites has been studied in both solid and liquid media. The research was concentrated on the biodegradation under aerobic and mesophilic conditions using poly-d-lactic acid (PDLA) and PDLA/cellulose microfibres (CMFs) samples as the sole carbon source. To determine the efficiency of the biodegradation, quantitative (mass variations, optical density (OD)) and qualitative (FTIR, NMR and SEM) analyses have been used to follow the polymer changes after degradation. The weight loss and OD of the biocomposites samples PDLA/CMFs were slower than that of pristine PDLA. The PDLA displayed the most important loss of weight (7.09%, 8.95%) compared to its initial weight and the lowest weight loss was detected in PDLA/CMF300 (1.04%, 2.19%) in solid and liquid mediums respectively. Also, the OD value of PDLA was increased from the seven days (0.381) to the last day (0.969). It appears that the major rate-determining factor affecting material degradation was its crystallinity without or with minimal assistance from abiotic factor because crystalline phases inhibit the diffusion of small water molecules. Otherwise, the Pseudomonas aeruginosa was isolated from Mediterranean soil has been found to be a novel candidate to biodegrade PDLA under mesophilic conditions.

Biodegradable sandwich-architectured films derived from pea starch and polylactic acid with enhanced shelf-life for fruit preservation

The development of biopolymer films is crucial for the replacement of conventional plastics. Tremendous effort is made to improve their performances by introducing biopolymers through the film manufacturing process. Herein, a sandwich-architectured film was proposed to efficiently improve the adhesion between the PS and PLA layers by using octenyl succinic anhydride-modified pea starch (OMPS) layer as the interlayer, leading to a highly mechanically enhanced interpenetrating network. Accordingly, the properties of the films were enhanced due to the synergism effect of sandwich architecture. In particular, the WVP value of the sandwich-architectured films (0.25 ∼ 0.89×10-10g·m-1·s-1·Pa-1) decreased more than 7-fold compared with the OMPS20 film, and the OP value of the sandwich-architectured films (0.256 ∼ 1.229×10-12cm3·m·m-2·s-1·Pa-1) decreased more than 10-fold in comparison to the PLA film. Benefitting from the characteristics investigated above, the films exhibited a favorable effect on strawberry storage. Overall, the fabricated eco-friendly sandwich-architectured films have shown great potential for biodegradable packaging applications.

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge for implantable tissue engineering

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge (SWPU) was prepared from soy protein isolate (SPI) and polyurethane prepolymer (PUP) by a process involving chemical reaction and freeze-drying. Effects of SPI content (0, 10%, 30%, 50%, 70%) on the micro-structure and physical properties of the composite sponges were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results showed that the reaction between -NCO of PUP and -NH₂ of SPI formed porous SPI-based WPU composite sponges. The results of the water absorption ratio measurement, solvent resistance measurement and compressive testing showed that water absorption, hydrophilicity, and tensile strength in the dry state of the composite sponges increased with the increase of SPI content. Especially, the tensile strength ranged from 0.3 MPa to 5.5 MPa with the increase in SPI content. The cytocompatibility and biodegradability of the composite sponges were evaluated by in vitro cell culture and in vivo implantation experiments. The results indicated that a certain SPI content in the sponges could promote the adhesion, growth, and proliferation of cells, enhance the cytocompatibility and accelerate the degradation speed of composite sponges. During the in vivo implanting period within 9 months, SWPU-50 sponge containing 50% of SPI brought out the lowest activated inflammatory reaction, most newly-regenerated blood capillaries, and best histocompatibility. All results indicated that SWPU-50 composite sponges had greatest potential for tissue engineering.

Synthesis and characterization of lactic acid esterified starch by an in-situ solid phase method

To improve the hydrophobicity and thermoplastic processability of starch, lactic acid esterified starch (LA-e-starch) was prepared by in-situ solid phase esterification with corn starch as the raw material and LA as the esterifying agent. Fourier transform infrared spectroscopy confirmed that the esterification reaction was successful. The optimal esterification efficiency of LA-e-starch was obtained when the LA proportion was 20% by mass, catalyst ratio at 3%, reaction temperature 80 °C and reaction time 2.5 h. LA-e-starch was characterized by scanning electron microscopy (SEM), contact angle (CA) analysis, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) as well as its water absorption rate evaluated. Results showed that in-situ solid phase esterification mainly occurred on starch granule surfaces and did not destroy the starch granularity. LA-e-starch surfaces were covered with a layer of polylactic acid resin, which caused starch granules to stick together. The initial contact angle of LA-e-starch was clearly larger than that of native starch and the water absorption rate lower than native starch in a 168 h test time, which showed that esterification effectively improved the hydrophobicity of starch. This esterification destroyed the crystalline structure of starch to some extent, resulting in a crystallinity reduction to 25.16%. In addition, the gelatinization temperature and enthalpy were lower than those of native starch. XRD and DSC analyses indicated that esterification modification increased starch thermoplasticity. Also, LA-e-starch exhibited better thermal stability than native starch, from which it was inferred that this application of esterification could improve the thermoplastic processability of starch modify the interfacial compatibility between starch and polymer resins.

Blending of phthalated starch and surface functionalized rice husk extracted nanosilica with LDPE towards developing an efficient packaging substitute

Starch was transformed to hydrophobic starch phthalate (contact angle 109°) in order to achieve a good dispersion in LDPE matrix. Nanosilica derived from rice husk after aminopropyltrimethoxysilane functionalization was also incorporated into the blend as property-enhancing filler. The produced crystalline starch phthalate had a lower particle size of 9.87 μm and a higher surface area of 2.87 m²/g compared to starch (40.28 μm, 1.91 m²/g). The potential quality modification of starch phthalate as a substitute for starch towards the production of a perfect biodegradable blend was quantified in terms of mechanical (tensile, tear, stiffness), optical (haze, transmittance), and biodegradation assessments. Interfacial adhesion between LDPE and starch phthalate was well justified by the morphology and enhancement in mechanical properties like tensile and tear strength from 8.87 to 12.67 MPa and 96.57 to 187.10 N/mm for 30% of starch or starch phthalate in LDPE matrix, respectively. Starch phthalate compared to starch blended films showed a higher biodegradation rate of 14.8 and 13.5% in garden soil and vegetable waste respectively in 1 year (at 30% biofiller), with a good first-order kinetics fit of the weight loss data having a higher degradation rate constant at higher content of biofiller in the blend.

New composites based on starch/Ecoflex®/biomass wastes: Mechanical, thermal, morphological and antimicrobial properties

Different biomass wastes were successfully blended with starch and Ecoflex® viz. poly(butylene adipate-co-terephthalate), without glycerol addition, to obtain biocomposite materials. The mechanical properties, as well as thermal and surface properties, of the developed composites were evaluated. It was found that the tensile strength and impact strength improved upon the addition of lignin, while the water uptake capacity decreased. The presence of 5% lignin determined an increase in tensile strength of 125.4% for materials comprising celery (CEL), 109.6% for materials comprising poplar seed hair fibers (PSH), 92.9% for materials comprising pomace (POM) and 127.7% for materials comprising Asclepias syriaca fibers (ASF), compared with a reference sample. The addition of lignin to all the formulations conferred good antimicrobial properties against different microorganisms, S. aureus and especially E. coli. The good mechanical properties, water resistance and antimicrobial activity against pathogens recommend these composites to be used in the manufacture of packaging materials.

Development and characterization of bilayer films based on pea starch/polylactic acid and use in the cherry tomatoes packaging

Renewable and biodegradable packaging materials are desired for numerous applications. Pea starch (PS) and polylactic acid (PLA) are promising alternatives to petrochemical-based polymers except that their phase separation causes poor mechanical properties. To surmount this problem, PS/PLA films with a double-layer structure were designed. The bilayer films displayed better toughness, thermal stability and barrier capacity over those of PLA films. The incorporation of PLA on a PS layer increased water resistance and tensile strength over those of a monolayer PS film. Weak interfacial adhesion between the PS and PLA layers was revealed by Fourier transform infrared spectroscopy and scanning electron microscopy. The bilayer films reduced weight loss ratio of cherry tomatoes and extended the retention of organic acids and vitamin C. A bilayer architecture represents a promising route to develop packaging materials that display the advantageous properties of each material layer.

Poly (Lactic Acid)/Thermoplastic Starch Films: Effect of Cardoon Seed Epoxidized Oil on Their Chemicophysical, Mechanical, and Barrier Properties

In this work, biodegradable films based on poly (lactic acid) (PLA) and corn thermoplastic starch (TPS), additivated with epoxidized cardoon oil plasticizer (ECO) at 3% by weight with respect to PLA mass fraction, were prepared by melt extrusion process and compression molding. The effect of ECO on structural, thermal, mechanical, barrier, and spectral optical properties of the films was investigated. Spectroscopic analysis evidenced the development of physical interaction between oil and polymers, mainly PLA. In addition, no oil migration occurrence was detected after six months of film preparation, as evidenced by oil mass evaluation by precipitation as well as by 1H-NMR methods, thus highlighting the good inclusion of oil inside the polymeric network. The plasticizing action of the oil induced a lean improvement of the interfacial adhesion between hydrophobic PLA and hydrophilic TPS, particularly accentuated in PLA80_ECO composition, as evidenced by morphological analysis of blend fracture surfaces. TGA data underlined that, differently from TPS-based films, PLA-based systems followed one degradative thermal profile suggesting a slight compatibilization effect of epoxidized oil in these films. The shifting of Tg values, by differential scanning calorimetry (DSC) analysis, indicated a weak miscibility at molecular level. Generally, in the investigated blends, the phase separation between PLA and TPS polymers was responsible for the mechanical properties failing; in particular, the tensile strength evidenced a negative deviation from the rule of mixtures, particularly marked in TPS-based blends, where no physical entanglements occurred between the polymers since their immiscibility even in presence of ECO. The epoxidized oil strongly improved the barrier properties (water vapor permeability (WVP) and oxygen permeability (O2P)) of all the films, likely developing a physical barrier to water and oxygen diffusion and solubilization. With respect to neat PLA, PL80 and PL80_ECO films evidenced the improvement of surface wettability, due to the presence of polar groups both in TPS (hydroxyl residues) and in epoxidized oil (oxirane rings). Finally, following to the conditioning in climatic chamber at T = 25 °C and RH = 50%, PLA80 film became opaque due to TPS water absorption, causing a light transmittance decreasing, as evidenced by spectral optical analysis.

Poly (lactic acid) blends: Processing, properties and applications

Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly l-lactide (PLLA) and poly d-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications.

Surface Modification Mechanism of Cross-Linking and Acetylation, and Their Influence on Characteristics of High Amylose Corn Starch

Through dual modification of high amylose corn starch (HACS), the surface modification mechanism of cross-linking and acetylation was mainly studied, and their effect on the physicochemical properties of HACS was further investigated. The variation in surface hydroxyl numbers showed that the influence of acetylation on the structure of particles was obviously different from cross-linking. Cross-linking was carried out only on the granule surface, whereas acetylation was finished not only on the surface but also in the interior of grains. Cross-linking could unevenly produce many micropores on the particle surface. The destruction level of HACS granules caused by acetylation was greater than that of cross-linking according to XRD. The surface hydroxyl groups were not distributed evenly on HACS particles. Cross-linking did not improve the freeze-thaw stability of HACS, but acetylation could improve its freeze-thaw stability. The variation in the blue value caused by cross-linking was more than by acetylation.

PRACTICAL APPLICATION

The surface modification mechanism of cross-linking and acetylation will provide the theoretical basis for industrial production of cross-linked starch, acetylated starch, and cross-linked acetylated starch. For the surface modification, the cross-linking degree was better evaluated by the surface hydroxyl group numbers than the conventional sedimentation volume method. The development of cross-linked acetylated high amylose corn starch as a new additive will further enlarge the application of high amylose corn starch in food, textile, medicine, and so on.

Biodegradation of poly(lactic acid) and some of its based systems with Trichoderma viride

The purpose of this study was to assess the biodegradation of poly(lactic acid) (PLA) and some plasticized PLA based systems by Trichoderma viride fungus, in liquid medium and controlled laboratory conditions. The studied systems were achieved using PLA, hydrolyzed collagen (HC) as biological macromolecules and other additives by melt processing procedure. PLA and the systems' biodegradability was examined by the weight losses of the samples (after 7 and 21 days of exposure) and FTIR-ATR, GPC, SEM analyses (after 21 fungus inoculation days). The thermogravimetry (TG-DTG) study showed that the thermostability of the samples decreased after biodegradation and was influenced by the chemical structure of the systems' components.

Soy protein-modified waterborne polyurethane biocomposites with improved functionality

Soy protein isolate-modified waterborne polyurethane biocomposites exhibited improved cytocompatibility and biodegradability.

Chemical modification of starch and its application as an adsorbent material

Starch is a biopolymer of plant origin which is cheap, abundant and has many applications in food and non-food industries.

Partial replacement effect of montmorillonite with cellulose nanowhiskers on polylactic acid nanocomposites

In this study, hybrid montmorillonite/cellulose nanowhiskers (MMT/CNW) reinforced polylactic acid (PLA) nanocomposites were produced through solution casting. The CNW filler was first isolated from microcrystalline cellulose by chemical swelling technique. The partial replacement of MMT with CNW in order to produce PLA/MMT/CNW hybrid nanocomposites was performed at 5 parts per hundred parts of polymer (phr) fillers content, based on highest tensile strength values as reported in our previous study. MMT were partially replaced with various amounts of CNW (1, 2, 3, 4 and 5phr). The tensile, thermal, morphological and biodegradability properties of PLA hybrid nanocomposites were investigated. The highest tensile strength of hybrid nanocomposites was obtained with the combination of 4phr MMT and 1phr CNW. Interestingly, the ductility of hybrid nanocomposites increased significantly by 79% at this formulation. The Young's modulus increased linearly with increasing CNW content. Thermogravimetric analysis illustrated that the partial replacement of MMT with CNW filler enhanced the thermal stability of the PLA. This is due to the relatively good dispersion of fillers in the hybrid nanocomposites samples as revealed by transmission electron microscopy. Interestingly, partial replacements of MMT with CNW improved the biodegradability of hybrid nanocomposites compared to PLA/MMT and neat PLA.

In vivo pharmacokinetic and tissue distribution investigation of sustained-release cisplatin implants in the normal esophageal submucosa of 12 beagle dogs

PURPOSE

The aim of this study was to clarify the pharmacokinetic, tissue distribution, hematologic, and histopathologic characteristics of sustained-release cisplatin from implants [CDDP-nanoparticle (NP) implants].

METHODS

Eighteen dogs (six hybrids and twelve beagles) were divided into three groups. In Group A, the six hybrid dogs were intravenously administered 20 mg CDDP via a hind limb vein. In Groups B and C, CDDP-NP implants containing CDDP doses of 40 and 60 mg, respectively, were embedded into the esophageal submucosa of beagles via painless gastroscopy with an endoscopic booster. Graphite frameless atomic absorption spectrophotometry was used to measure total platinum in plasma and tissues at various timepoints. In addition, free platinum levels in Group B were determined using inductively coupled plasma mass spectrometry. Toxicologic evaluation was also conducted.

RESULTS

Pharmacokinetic results indicated that the CDDP-NP implant could achieve a smooth pharmacokinetic curve, with the plasma invalid concentration reached after almost 480 h, which is approximately ten times longer than that of standard CDDP (48 h). The peak time, peak concentration, clearance, elimination half-life, area under the curve, volume of distribution at steady state, and mean residence time of Groups B and C were 494 and 211, 0.39 and 0.42, 0.044 and 0.059, 80.11 and 87.70, 44 and 49, 38.8 and 57.9, and 12.29 and 12.39 times those of Group A, respectively (all P < 0.05). The ratio of free/total platinum concentration was 2.0-3.1% in plasma, 14.2% in liver tissue, and 14.3% in kidney tissue. Tissue distribution studies showed that the highest platinum concentrations were found in the esophagus, followed by the kidney and liver. Compared with pre-implantation (day 0), there were no significant differences in most hematological indicators in Groups B and C (P > 0.05). Furthermore, histopathologic examination of the kidneys of dogs from Group C revealed no significant kidney damage. Unlike the intravenous CDDP group (Group A), no animals in the implantation groups showed any clinical signs of toxicity.

CONCLUSION

CDDP-NP implants can be used to achieve a smooth pharmacokinetic curve and higher drug concentration, as well as a longer mean residence time at the implantation site, with reduced side effects compared with intravenous CDDP.