The effects of physical and chemical treatments on Na2S produced feather keratin films

Chicken Feather Protein Dispersant for Effective Crude Oil Dispersion in the Marine Environment

Various studies report that aside from the adverse impact of the crude oil on the marine environment, there is the likelihood that chemical dispersants used on the surface of water as oil-treating agents themselves possess a degree of toxicity, which have additional effects on the environment. To eliminate the subject of toxicity, there exist several materials in nature that have the ability to form good emulsions, and such products include protein molecules. In this study, chicken feathers which are known to contain ≥90% protein were used to formulate a novel dispersant to disperse crude oil in seawater (35 ppt). Protein from chicken feathers was extracted and synthesized into the chicken feather protein (CFP) dispersant using deionized water as a solvent. Emulsions formed from CFP-synthesized dispersants were stable over a considerably long period of time, whereas the droplet sizes of the emulsion formed were on the average very small in diameter, making droplet coalescence very slow. The CFP dispersants exhibited moderate surface and interfacial activity at normal seawater salinity. Using the US EPA's baffled flask test, at 800 and 1000 mg/ml CFP surfactant-to-oil ratios, dispersion effectiveness values of 56.92 and 68.64 vol % were obtained, respectively, which show that CFP has a great potential in crude oil dispersion. Moreover, the acute toxicity test performed on Nile tilapia showed that CFP was practically nontoxic with an LC50 value of more than 100 mg/L after 96 h of exposure. The results obtained showed that the CFP dispersant is environmentally friendly.

Surveying the elimination of hazardous heavy metal from the multi-component systems using various sorbents: a review

In this review, several adsorbents were studied for the elimination of heavy metal ions from multi-component wastewaters. These utilized sorbents are mineral materials, microbes, waste materials, and polymers. It was attempted to probe the structure and chemistry characteristics such as surface morphology, main functional groups, participated elements, surface area, and the adsorbent charges by SEM, FTIR, EDX, and BET tests. The uptake efficiency for metal ions, reusability studies, isotherm models, and kinetic relations for recognizing the adsorbent potentials. Besides, the influential factors such as acidity, initial concentration, time, and heat degree were investigated for selecting the optimum operating conditions in each of the adsorbents. According to the results, polymers especially chitosan, have displayed a higher adsorption capacity relative to the other common adsorbents owing to the excellent surface area and more functional groups such as amine, hydroxyl, and carboxyl species. The high surface area generates the possible active sites for trapping the particles, and the more effective functional groups can complex more metal ions from the polluted water. Also, it was observed that the uptake capacity of each metal ion in the multi-component solutions was different because the ionic radii of each metal ion were different, which influence the competition of metal ions for filling the active sites. Finally, the reusability of the polymers was suitable, because they can use several cycles which proves the economic aspect of the polymers as the adsorbent.

Preparation Methods and Functional Characteristics of Regenerated Keratin-Based Biofilms

The recycling, development, and application of keratin-containing waste (e.g., hair, wool, feather, and so on) provide an important means to address related environmental pollution and energy shortage issues. The extraction of keratin and the development of keratin-based functional materials are key to solving keratin-containing waste pollution. Keratin-based biofilms are gaining substantial interest due to their excellent characteristics, such as good biocompatibility, high biodegradability, appropriate adsorption, and rich renewable sources, among others. At present, keratin-based biofilms are a good option for various applications, and the development of keratin-based biofilms from keratin-containing waste is considered crucial for sustainable development. In this paper, in order to achieve clean production while maintaining the functional characteristics of natural keratin as much as possible, four important keratin extraction methods—thermal hydrolysis, ultrasonic technology, eco-friendly solvent system, and microbial decomposition—are described, and the characteristics of these four extraction methods are analysed. Next, methods for the preparation of keratin-based biofilms are introduced, including solvent casting, electrospinning, template self-assembly, freeze-drying, and soft lithography methods. Then, the functional properties and application prospects of keratin-based biofilms are discussed. Finally, future research directions related to keratin-based biofilms are proposed. Overall, it can be concluded that the high-value conversion of keratin-containing waste into regenerated keratin-based biofilms has great importance for sustainable development and is highly suggested due to their great potential for use in biomedical materials, optoelectronic devices, and metal ion detection applications. It is hoped that this paper can provide some basic information for the development and application of keratin-based biofilms.

Autogenous Cross-Linking of Recycled Keratin from Poultry-Feather Waste to Hydrogels for Plant-Growth Media

The global rise in atmospheric temperature is leading to an increasing spread of semi-arid and arid regions and is accompanied by a deterioration of arable land. Polymers can help in a number of ways, but they must not be a burden to the environment. In this context, we present herein a method by which goose feathers, representative of keratin waste in general, can be transformed into hydrogels for use as a plant growth medium. The treatment of shredded feathers in Na₂S solution at ambient conditions dissolves approx. 80% of the keratin within 30 min. During evaporation, the thiol groups of cysteine reoxidise to disulphide bridges. Additionally, the protein chains form β-sheets. Both act as cross-links that enables the formation of gels. The drying conditions were found to be crucial as slower evaporation affords gels with higher degrees of swelling at the cost of reduced gel yields. The cress germination test indicated the absence of toxic substances in the gel, which strongly adheres to the roots. Thereby, the plants are protected from drought stress as long as the gel still contains moisture.

Ductile keratin films from deep eutectic solvent-fractionated feathers

Feathers, an industrial by-product, are a valuable source of keratin that could be used, for example, in the preparation of films for biomedical and packaging applications. However, the utilisation of feather keratin requires scalable processes to convert feathers into a feasible keratin stream. This paper shows how deep eutectic solvent (DES) fractionated feathers could be converted into strong films. In the DES fractionation process, two keratin fractions with different molecular weights were obtained. The films made of the high molecular weight keratin fraction had better mechanical properties and stability against moisture than the films made of the low molecular weight keratin fraction. The strength properties were further improved by cross-linking the keratin with diglycidyl ether enabling the formation of a uniform keratin network, whereas glutaraldehyde did not show a clear cross-linking effect. These keratin films could be used, for example, in food packaging or medical applications such as wound care.

Biodegradable Packaging Materials from Animal Processing Co-Products and Wastes: An Overview

Biodegradable polymers are non-toxic, environmentally friendly biopolymers with considerable mechanical and barrier properties that can be degraded in industrial or home composting conditions. These biopolymers can be generated from sustainable natural sources or from the agricultural and animal processing co-products and wastes. Animals processing co-products are low value, underutilized, non-meat components that are generally generated from meat processing or slaughterhouse such as hide, blood, some offal etc. These are often converted into low-value products such as animal feed or in some cases disposed of as waste. Collagen, gelatin, keratin, myofibrillar proteins, and chitosan are the major value-added biopolymers obtained from the processing of animal's products. While these have many applications in food and pharmaceutical industries, a significant amount is underutilized and therefore hold potential for use in the generation of bioplastics. This review summarizes the research progress on the utilization of meat processing co-products to fabricate biodegradable polymers with the main focus on food industry applications. In addition, the factors affecting the application of biodegradable polymers in the packaging sector, their current industrial status, and regulations are also discussed.

Submicron amino acid particles reinforced 100% keratin biomedical films with enhanced wet properties via interfacial strengthening

Keratin films with wet stability and strength suitable for biomedical applications were developed via reinforcement with submicron cysteine particles for improved interfaces. Keratin products regenerated from wool or human hair were widely investigated as wound dressing and tissue engineering scaffolds for their satisfactory biomedical properties. However, regenerated keratin scaffolds usually did not have good mechanical properties, and also could not stand humid or wet biological environment due to poor moisture stability. Reinforcements for keratin materials were usually polysaccharides or synthetic polymers, and thus usually had non-ideal interfacial properties due to limited compatibility. In this research, submicron cystine particles were employed to reinforce keratin films for their high compatibility with keratin and bio-safety. Transition of primary and secondary structures of keratin due to matrix-reinforcement interaction was analyzed. The keratin films showed unprecedented pliancy, good tensile properties under humid conditions and biocompatibility, and thus had good potential for biomedical engineering applications.

A biodegradable biomass-based polymeric composite for slow release and water retention

Slow-release fertilizer has been proven to be more effective than traditional fertilizer for providing a long-term stable nutrient supply. Although such fertilizers have been widely investigated, their water-retention properties and biodegradability have not been fully analysed. Composites of fertilizers and polymers provide opportunities to prepare new types of fertilizer with enhanced properties for real applications. Chicken feather protein-graft-poly(potassium acrylate)-polyvinyl alcohol semi-interpenetrating networks forming a super absorbent resin combined with nitrogen (N) and phosphorus (P) (CFP-g-PKA/PVA/NP semi-IPNs SAR) was prepared. The chemically bonded or physically embedded fertilizer compound could be released form the resin matrix to the surrounding soil under irrigation. The synthesis mechanism, morphology, and chemical and mechanical structure of the synthesized composites were investigated. The reactant doses were optimized through response surface methodology (RSM). A 30-day field trial of the prepared SAR was applied to detect the influence of sample particle size, soil salinity, pH, and moisture content on the slow-release behaviour of N and P. The maximum release values of N and P from the composites were 69.46% N and 65.23% P. A 120-day soil burying experiment and 30-day Aspergillus niger (A. niger) inoculation were performed, and the biodegradability and change in microstructure were monitored. The addition of SAR to soil could also improve the water-retention ability of the soil.

Fabrication and characterization of chicken feather keratin/polysaccharides blended polymer coated nonwoven dressing materials for wound healing applications

In this research work, three kinds of nonwoven wound dressings were developed from chicken feather keratin (CFK-NW), keratin‑sodium alginate (CFK-SA-NW) and keratin-chitosan (CFK-CS-NW) and characterized using FTIR and SEM. The physical characteristics such as air permeability, thickness and areal density test results revealed the suitability of fabricated materials for wound dressing applications. CFK-SA-NW and CFK-CS-NW indicated a positive antibacterial effect against Gram's positive Staphylococcus aureus and Gram's negative Klebsiella pneumoniae and Escherichia coli bacteria with the zone of inhibition enhanced over >2.0 cm. Moreover, the biomedical potentials of dressing materials has been investigated by cell viability and cytotoxicity tests. Further, the wound healing ability was demonstrated using in vivo model (Albino Wistar rat). The fabricated materials exhibited good support for cell viability and a strong cytocompatibility. Furthermore, the hundred percent wound healing ability of CFK-CS-NW, CFK-SA-NW, CFK-NW and untreated control rats was observed at 15, 17, 21 and 23 days, respectively, Moreover, the wound healing potential of CFK-CS-NW and CFK-SA-NW was found to be better than that of CFK-NW and control group of rats. The outcome of the present study discloses the prospective applications of the developed materials as wound dressing biomaterial.

Keratin based bioplastic film from chicken feathers and its characterization

Plastics have been one of the highly valued materials and it plays an significant role in human's life such as in food packaging and biomedical applications. Bioplastic materials can gradually work as a substitute for various materials based on fossil oil. The issue like sustainability and environmental challenges which occur due to manufacturing and disposal of synthetic plastics can be conquering by bio-based plastics. Feathers are among the most inexpensive abundant, and renewable protein sources. Feathers disposal to the landfills leads to environmental pollutions and it results into wastage of 90% of protein raw material. Keratin is non-burning hydrophilic, and biodegradable due to which it can be applicable in various ways via chemical processing. Main objective of this research is to synthesis bioplastic using keratin from chicken feathers. Extracted keratin solution mixed with different concentration of glycerol (2 to 10%) to produce plastic films. The mixture was stirred under constant magnetic stirring at 60 °C for 5 h. The mixtures are then poured into aluminum weighing boat and dried in an oven at 60 °C for 24 h. The mechanical properties of the samples were tested and the physic-chemical properties of the bioplastic were studied. According to the results, Scanning Electron Microscopy test showed good compatible morphologies without holes, cavity and edge. The difference in chemical composition was analyzed using Fourier transform infrared spectroscopy (FTIR). The samples were also characterized by thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-Ray diffraction (XRD) to check the thermal and crystallinity properties. Other than that, bioplastic made up from keratin with 2% of glycerol has the best mechanical and thermal properties. According to biodegradability test, all bioplastic produced are proven biodegradable. Therefore, the results showed possible application of the film as an alternative to fossil oil based materials which are harmful to the environment.

Chicken feathers as a natural source of sulphur to develop sustainable protein films with enhanced properties

In this work, the effect of hydrolyzed keratin on the properties of soy protein-based films was analyzed when different manufacture processes were employed. It is widely known that the processing method selected can affect the film properties as a function of the structure obtained during the film formation. Therefore, the assessment of hydrolyzed keratin/soy protein films processed by casting and compression moulding was carried out by means of the analysis of physicochemical, thermal, mechanical, optical and surface properties. It was observed that the incorporation of hydrolyzed keratin, obtained from a simpler, environmentally friendlier and more sustainable extraction method, resulted in the improvement of the thermal stability of the films, irrespective of the processing method employed. Moreover, the films processed by compression moulding showed enhanced tensile strength, which increased with the incorporation of hydrolyzed keratin due to the formation of disulfide bonds.

An edible film of sodium alginate/pullulan incorporated with capsaicin

Capsaicin, an active ingredient in red pepper, shows great antibacterial activity.

Degradation and regeneration of feather keratin in NMMO solution

Chicken feather, a potential source of keratin, is often disposed as waste material. Although some methods, i.e., hydrolysis, reduction, and oxidation, have been developed to isolate keratin for composites, it has been limited due to the rising environmental concerns. In this work, a green solvent N-methylmorpholine N-oxide (NMMO) was used to extract keratin from chicken feather waste. Eighty-nine percent of keratin was extracted using 75% NMMO solution. However, the result from size exclusion HPLC showed that most of the keratin degraded into polypeptide with molecular weight of 2189 and only 25.3% regenerated keratin was obtained with molecular weight of 14,485. Analysis of amino acid composition showed a severe damage to the disulfide bonds in keratin during the extraction procedure. Oxidization had an important effect on the reconstitution of the disulfide bonds, which formed a stable three-dimensional net structure in the regenerated keratins. Besides, Raman spectra, NMR, FT-IR, XRD, and TGA were used to characterize the properties of regenerated keratin and raw chicken feather. In the end, a possible mechanism was proposed based on the results.

Mechanical and Water Barrier Properties of Zein–Corn Starch Composite Films as Affected by Gallic Acid Treatment

The effect of gallic acid treatment on mechanical and water barrier properties in zein and zein–corn starch composite films was investigated. Four concentrations of corn starch (5 %, 10 %, 15 %, 20 %) were used in composite films making a final solid concentration of 6 % (w/v) in the film forming solution. One composite film containing 10 % corn starch was also prepared in absence of gallic acid for comparison purpose. Gallic acid treatment improved tensile strength (TS) and water vapor permeability (WVP) while solubility was increased in control zein films. On the other hand, gallic acid treatment significantly (p < 0.05) reduced TS and increased WVP in zein–corn starch composite films. Interestingly, mechanical and water barrier properties of composite films prepared in absence of gallic acid were comparatively better than gallic acid treated composite films. These findings provided useful insights in how each individual hydrocolloid in the composite film was differently affected by gallic acid treatment.

Effect of Gallic acid on mechanical and water barrier properties of zein-oleic acid composite films

In this study, the effect of gallic acid on mechanical and water barrier properties of zein-oleic acid 0-4 % composite films was investigated. Molecular weight distribution analysis was carried out to confirm gallic acid induced cross linking through change in molecular weight in fraction containing zein proteins. Results revealed that gallic acid treatment increased tensile strength from 17.9 MPa to 26.0 MPa, decreased water vapour permeability from 0.60 (g mm m(-2) h(-1) kPa(-1)) to 0.41 (g mm m(-2) h(-1) kPa(-1)), increased solubility from 6.3 % to 10.2 % and marginally increased elongation at break from 3.7 % to 4.2 % in zein films only. However, gallic acid treatment in zein-oleic composite films did not significantly influence mechanical and water barrier properties and in most instances irrespective of oleic acid concentration, the properties were negatively affected. Results from scanning electron microscopy showed that both gallic acid treated and untreated zein films and composite films containing 3 % oleic acid had a compact and homogeneous structure while those containing 4 % oleic acid had inhomogeneous structure. The findings have demonstrated that gallic acid treatment can significantly improve mechanical and water barrier properties especially in zein films only as opposed to when used in composite films using zein and oleic acid.

Pure keratin membrane and fibers from chicken feather

In this research, keratin was extracted from the disposable chicken feather using l-cysteine as reducing agent. Then, it was re-dissolved in the sodium carbonate-sodium bicarbonate buffer, and the pure keratin membrane and fiber were fabricated by doctor-blade casting process and wet spinning method, respectively. Scanning electron microscopy (SEM), fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to characterize the chemical and physical properties of resulting powder, membrane and fiber. Compared with the raw chicken feather, the regenerated keratin materials retain its chemical structure and thermal stability, their relative crystallinity is a little different depend on the shaping method, which leads to the difference in moisture regain. The mechanical results show that tensile strength of the keratin membrane researches 3.5MPa, have potential application in biomedical fields. However, the keratin fiber presents low tenacity, i.e. 0.5cN/dtex, this problem should be solved in order to apply the new fiber in textile and material science.

Adsorption behavior and mechanism of heavy metal ions by chicken feather protein-based semi-interpenetrating polymer networks super absorbent resin

Preparation and metal ions adsorption of CFP-g-PKA/PVA semi-IPN super absorbent resin.