In vitro release of metformin from iron (III) cross-linked alginate–carboxymethyl cellulose hydrogel beads

Physicochemical, structural, and in-vitro release properties of carboxymethyl cellulose-based cryogel beads incorporating resveratrol-loaded microparticles for colon-targeted delivery system

The objective of this study was to investigate the physicochemical, structural, and in vitro release properties of carboxymethyl cellulose (CMC)-based cryogel beads incorporating resveratrol-loaded microparticles (MP) for colon-targeted delivery system. CMC-based cryogel beads were produced by ionic cross-linking with different concentrations (2%, 3%, and 4%) of AlCl3. Based on FE-SEM images, CMC-based cryogel beads showed a smoother surface and more compact internal structure with increasing AlCl3 concentrations, which was proven to be due to the new cross-linking between the -COO- group of CMC and Al3+ by FT-IR analysis. The encapsulation efficiency of the cryogel beads was significantly increased from 79.48% to 85.74% by elevating the concentrations of AlCl3 from 2% to 4%, respectively. In vitro release study showed that all CMC-based cryogel beads had higher stability for resveratrol than MP in simulated gastric conditions and can efficiently deliver resveratrol to colon without the premature release.

A sodium carboxymethyl cellulose-induced emission and gelation system for time-dependent information encryption and anti-counterfeiting

Many lanthanide complexes do not form gel or even exhibit characteristic luminescence of lanthanide ions, which limits their applications in many fields. Therefore, there is an urgent need for a third component that can not only promote emission but also gel the lanthanide complex system to construct new smart materials such as time-dependent information encryption and anti-counterfeiting materials. Herein, a luminescent lanthanide metallogel was successfully prepared by using the third component sodium carboxymethyl cellulose (NaCMC) to induce the gelation and luminescence of the complex (H3L/Tb3+) of 4,4',4″-((benzene-1,3,5-tricarbonyl)tris(azanediyl)) tris(2-hydroxybenzoic acid) (H3L) and Tb3+. The H3L/Tb3+ complex itself does not form gel and has no characteristic luminescence of Tb3+. Moreover, the multicolor emission of H3L/Tb3+/NaCMC gels was prepared based on Förster resonance energy transfer (FRET) platforms to obtain a high-security level information encryption and anti-counterfeiting materials. These multicolor emission gels exhibit emission color tunability with time dependence due to the different energy transfer efficiencies at each pH node controlled by glucono-δ-lactone hydrolysis time. Based on the time response characteristics, the time-dependent information encryption and anti-counterfeiting materials are developed.

Efficient adsorption of rhodamine B using synthesized Mg-Al hydrotalcite/ sodium carboxymethylcellulose/ sodium alginate hydrogel spheres: Performance and mechanistic analysis

In this study, the sodium dodecyl sulfate intercalated modified magnesium-aluminum hydrotalcite/sodium alginate/sodium carboxymethylcellulose (modified LDHs/SA/CMC) composite gel spheres were synthesized and their efficacies in adsorbing the cationic dye rhodamine B (RhB) from aqueous solutions were evaluated. The effects of adsorption time, pH and temperature on the adsorption of RhB by spheres were investigated. Remarkably, the modified LDHs/SA/CMC gel spheres achieved adsorption equilibrium after 600 min at 25 °C, and the removal rate of RhB at 60 mg/L reached 91.49 % with the maximum adsorption capacity of 59.64 mg/g. The gel spheres maintained over 80 % efficacy across four adsorption cycles. Kinetic and isotherm analyses revealed that the adsorption of RhB conformed to the secondary kinetic model and the Langmuir isotherm, indicating a spontaneous and exothermic nature of the adsorption process. The adsorption mechanisms of modified LDHs/SA/CMC gel spheres on RhB dyes include electrostatic adsorption, hydrogen bonding and hydrophobic interactions. In conclusion, modified LDHs/SA/CMC gel sphere is a green, simple, recyclable and efficient adsorbent, which is expected to be widely used for the treatment of cationic dye wastewater.

Sustained Release Studies of Metformin Hydrochloride Drug Using Conducting Polymer/Gelatin-Based Composite Hydrogels

The present work highlights the synthesis and characterization of conducting polymer (CP)-based composite hydrogels with gelatin (GL-B) for their application as drug delivery vehicles. The spectral, morphological, and rheological properties of the synthesized hydrogels were explored, and morphological studies confirmed formation of an intense interpenetrating network. Rheological measurements showed variation in the flow behavior with the type of conducting polymer. The hydrogels showed a slow drug release rate of about 10 h due to the presence of the conducting polymer. The release kinetics were fitted in various mathematical models and were best fit in first order for PNA-, POPD-, and PANI-based GL-B hydrogels, and the PVDF/GL-B hydrogel was best fit in the zero-order models. The drug release was found to follow the order: POPD/GL-B > PANI/GL-B > PVDF/GL-B.

Composite alginate-based hydrogel delivery of antioxidant pumpkin protein hydrolysate in simulated gastrointestinal condition

Pumpkin seeds are rich in protein (24-36.5%). Some of them are consumed as nuts, while others are regarded as waste and used for feeding animals. Protein hydrolysates from pumpkin seeds possess some bioactive properties, such as anti-oxidant activity. In this work, various composite alginate hydrogels contain Aloe vera, CMC, and tragacanth have been employed to protect PSPH against degradation in simulated gastrointestinal digestion (SGI) and regulate its release rate. The encapsulation efficiency of PSPH in plain alginate and beads with Aloe vera, CMC, and tragacanth combinations was 71.63, 75.63, 85.07, and 80.4%, respectively. The release rate of the plain alginate beads was %30.23 in the SGF and %52.26 in the SIF, and decreased in the composite-based beads. The highest decreasing rate in the antioxidant activity during SGI was observed in free PSPH, and the decreasing rate slowed down in the alginate-based composites. The swelling rate in plain alginate was %-23.43 and %25.43 in the SGF and SIF, respectively, and increased in the composite-based beads. The FTIR spectra of hydrogels before and after loading with PSPH showed identical absorption patterns and were similar to each other. Based on the data for SEM, it was revealed that substituting other polymers in polymer combinations with alginates resulted in a porosity reduction of the beads and smoother and more uniform surfaces. Based on the results, the combination of polysacchared with alginate could protect and increase the applicability of PSPH as a functional component in the food industry.

Effect of DES lignin incorporation on physicochemical, antioxidant and antimicrobial properties of carboxymethyl cellulose-based films

Herein, three pretreated grapevine lignins were incorporated into carboxymethyl cellulose films. The effects of traditional NaOH pretreated lignin and DES (ChCl-LA, ChCl-LA & K2CO3-EG) pretreated lignin on film properties were compared. Modern analytical techniques were employed to systematically characterize the pretreated lignin and the different CMC-lignin films. The results showed that DES lignin was of high purity, low molecular weight, and homogeneous structure. It outperformed traditional NaOH lignin in terms of compatibility with CMC, enabling it to perform its bioactivity and physicochemical functions in films. This feature effectively enhanced the hydrophobicity, UV shielding ability, water vapor barrier, thermal stability, mechanical properties, and biological activity of CMC-DES lignin film. NMR (2D HSQC) showed that the excellent antioxidant and antibacterial capabilities of CMC-DES lignin film are due to the retention of butyl (S) and p-hydroxyphenyl (H) units in DES lignin, resulting in its rich phenolic hydroxyl content. The detailed structural elucidation of DES lignin's chemical interactions with CMC provided valuable insights into the advantageous properties observed in the films, presenting innovative solutions for applications in the food packaging and preservation industries.

Formation of pH-responsive hydrogel beads and their gel properties: Soybean protein nanofibers and sodium alginate

Hydrogel beads prepared from protein nanofibers are popular because of their safety, sleek appearance, and protection of biologically active substances. However, extreme external environmental variations, such as pH and temperature, can limit their practical application. To meet the application requirements of hydrogel beads in different environments, non-covalent mixtures of CaCl2 cross-linked soybean protein nanofibers (SNF) and sodium alginate (SA) were used to prepare hydrogel beads. In the present study, the hardness (782.48 g) and elasticity of hydrogel beads formed at SNF/SA = 7:3 and CaCl2 concentration of 0.1 mol/L were the maximum. Furthermore, the water content and pH swelling also reached a peak (98.68 %, 43.85 g/g) due to the best morphology and regular internal network structure. Meanwhile, the pH-responsive hydrogel beads with added anthocyanins were able to respond to the ambient pH under different temperatures and pH conditions and maintained color stability during 96 h of storage (ΔE < 5). In this experiment, a pH-responsive hydrogel bead based on soybean protein nanofiber (SNF) and sodium alginate (SA) was prepared by simple ionic crosslinking. It provides a theoretical and experimental basis for the future application of plant protein nanofibers as pH-responsive hydrogel materials.

Sodium alginate/sodium lignosulfonate hydrogel based on inert Ca2+ activation for water conservation and growth promotion

Soil degradation has become a major global problem owing to the rapid development of agriculture. The problems of soil drought and decreased soil fertility caused by soil degradation severely affect the development of the agricultural and forestry industries. In this study, we designed sodium alginate (SA)/sodium lignosulfonate (SLS) hydrogel based on the activation and crosslinking of inert Ca2+. CaCO3 and SA were mixed, and then, inert Ca2+ was activated to prepare a gel with a stable structure and a uniform interior and exterior. The crosslinking activated by inert Ca2+ enhanced the stability of the hydrogel, and the optimal swelling rate of the hydrogel reached 28.91 g/g, thereby effectively improving the water-holding capacity of the soil (77.6-108.83 g/kg). SLS was degraded into humic acid (HA) and gradually released, demonstrating a positive growth-promoting effect in plant growth experiments. The SA/SLS hydrogel can be used for soil water retention and mitigation to significantly decrease the water loss rate of soil. This study will assist in addressing soil drought and fertility loss.

Chitosan based hybrid superabsorbent for controlled drug delivery application

In the present study, a hybrid chitosan-alginate superabsorbent is prepared using maleic acid as a cross-linker and acrylamide as a grafting agent using the free radical mechanism. The composite hydrogel shows good swelling capacity along with hemocompatibility and biocompatibility and hence it is utilized as a drug delivery device. The characterization techniques including x-ray diffraction, Fourier transform infrared, x-ray photoelectron spectroscopy, and thermal analysis indicate the successful synthesis of stable hydrogel with rich functionalities. Metformin hydrochloride is used as a model drug which is used to treat diabetes. The drug encapsulation is done using the swelling diffusion method after the synthesis of hydrogel. The release of metformin from the drug-loaded hydrogel at physiological pH highlights the role of non-covalent interactions between the drug and hydrogel. In vitro release studies of Metformin from the drug-loaded hydrogel show higher release profiles at intestinal pH (7.4) compared to stomach pH (1.2). The observed cumulative release is 82.71% at pH 7.4 and 45.67% at pH 1.2 after 10 h. Brunauer-Emmett-Teller analysis reveals the effect of surface area, pore size, and pore volume of hydrogel on the drug release. The drug release from the hybrid chitosan-alginate hydrogel is found to be more sustained in comparison to the pure chitosan hydrogel. For the present drug delivery system, the swelling-controlled release is found to be more dominating than the pH-controlled release. The synthesized hydrogel can be successfully employed as a potential drug delivery system for controlled drug delivery.

Cellulose-alginate hydrogels and their nanocomposites for water remediation and biomedical applications

In the last decade, both cellulose and alginate polysaccharides have been extensively utilized for the synthesis of biocompatible hydrogels because of their alluring characteristics like low cost, biodegradability, hydrophilicity, biodegradability, ease of availability and non-toxicity. The presence of abundant hydrophilic functional groups (like carboxyl and hydroxyl) on the surface of cellulose and alginate or their derivatives makes these materials promising candidates for the preparation of hydrogels with appealing structures and characteristics, leading to growing research in water treatment and biomedical fields. These two polysaccharides are typically blended together to improve hydrogels' desired qualities (mechanical strength, adsorption properties, cellulose/alginate yield). So, keeping in view their extensive applicability, in the present review article, recent advances in the development of cellulose/nanocellulose-alginate-based hydrogels and their relevance in water treatment (adsorption of dyes, heavy metals, etc.) and biomedical field (wound healing, tissue engineering, drug delivery) has been reviewed. Further, impact of other inorganic/organic additives in cellulose/nanocellulose-alginate-based hydrogels properties like contaminants adsorption, drug delivery, tissue engineering, etc., has also been studied. Moreover, the current difficulties and future prospects of nanocellulose-alginate-based hydrogels regarding their water purification and biomedical applications are also discussed at the end.

Fabrication and characterization of an antibacterial chitosan-coated allantoin-loaded NaCMC/SA skin scaffold for wound healing applications

The field of tissue engineering has recently emerged as one of the most promising approaches to address the limitations of conventional tissue replacements for severe injuries. This study introduces a chitosan-coated porous skin scaffold based on sodium carboxymethyl cellulose (NaCMC) and sodium alginate (SA) hydrogels, incorporating allantoin (AL) as an antibacterial agent. The NaCMC/SA hydrogel was cross-linked with epichlorohydrin (ECH) and freeze-dried to obtain a three-dimensional porous structure. The coated and non-coated scaffolds underwent comprehensive evaluation and characterization through various in-vitro analyses, including SEM imaging, swelling, degradation, and mechanical assessments. Furthermore, the scaffolds were studied regarding their allantoin (AL) release profiles, antibacterial properties, cell viability, and cell adhesion. The in-vitro analyses revealed that adding a chitosan (CS) coating and allantoin (AL) to the NaCMC/SA hydrogel significantly improved the scaffolds' antibacterial properties and cell viability. It was observed that the NaCMC:SA ratio and ECH concentration influenced the swelling capacity, biodegradation, drug release profile, and mechanical properties of the scaffolds. Samples with higher NaCMC content exhibited enhanced swelling capacity, more controlled allantoin (AL) release, and improved mechanical strength. Furthermore, the in-vivo results demonstrated that the proposed skin scaffold exhibited satisfactory biocompatibility and supported cell viability during wound healing in Wistar rats, highlighting its potential for clinical applications.

Magnetic Ionotropic Hydrogels Based on Carboxymethyl Cellulose for Aqueous Pollution Mitigation

In this work, stabilized ionotropic hydrogels were designed using sodium carboxymethyl cellulose (CMC) and assessed as inexpensive sorbents for hazardous chemicals (e.g., Methylene Blue, MB) from contaminated wastewaters. In order to increase the adsorption capacity of the hydrogelated matrix and facilitate its magnetic separation from aqueous solutions, sodium dodecyl sulfate (SDS) and manganese ferrite (MnFe₂O₄) were introduced into the polymer framework. The morphological, structural, elemental, and magnetic properties of the adsorbents (in the form of beads) were assessed using scanning electron microscopy (SEM), energy-dispersive X-ray analysis, Fourier-transform infrared spectroscopy (FTIR), and a vibrating-sample magnetometer (VSM). The magnetic beads with the best adsorption performance were subjected to kinetic and isotherm studies. The PFO model best describes the adsorption kinetics. A homogeneous monolayer adsorption system was predicted by the Langmuir isotherm model, registering a maximum adsorption capacity of 234 mg/g at 300 K. The calculated thermodynamic parameter values indicated that the investigated adsorption processes were both spontaneous (ΔG < 0) and exothermic (ΔH < 0). The used sorbent can be recovered after immersion in acetone (93% desorption efficiency) and re-used for MB adsorption. In addition, the molecular docking simulations disclosed aspects of the mechanism of intermolecular interaction between CMC and MB by detailing the contributions of the van der Waals (physical) and Coulomb (electrostatic) forces.

Development of soy protein isolate/sodium carboxymethyl cellulose synbiotic microgels by double crosslinking with transglutaminase and aluminum chloride for delivery system of Lactobacillus acidophilus

This study was carried out to develop soy protein isolate (SPI)/sodium carboxymethyl cellulose (NaCMC) synbiotic microgels by applying a double-crosslinking technique using transglutaminase and different concentrations of AlCl₃ (0, 6, 7, 8 %) and also by adding Lactobacillus acidophilus (L. acidophilus) and pectic oligosaccharide. Synbiotic microgels crosslinked using 8 % AlCl₃ (SPI/NaCMC-Al³⁺₈ microgels) showed the highest encapsulation efficiency (92 %). The double-crosslinked microgels exhibited a smooth surface as proved by SEM. FT-IR, XRD, and DSC analyses showed the possible interaction within matrices and demonstrated the higher thermal stability of synbiotic microgels prepared using a higher concentration of AlCl₃. All in all, after exposure to simulated digestion fluid, heat treatment (72 °C, 15 s), and refrigerated storage, more cells in double-crosslinked microgels survived compared to single-crosslinked microgels. In particular, probiotic viability was highest in SPI/NaCMC-Al³⁺₈ microgels. These results indicate that the SPI/NaCMC-Al³⁺₈ microgels developed in this study can effectively protect L. acidophilus against the external environment.

Enzymatically mediated Gleditsia sinensis galactomannan based hydrogel inspired by wound healing process

The self-healing property based on metal-ligand physical coordination is particularly interesting in bio-hydrogel science due to its allowance for multiple local healing events to process. As the most abundant renewable green resource in nature, Gleditsia sinensis galactomannan has great potential as a starting material for functional materials. In this study, the biocompatible Gleditsia sinensis galactomannan and cellulose were firstly chemically modified and then taken as the main constituent for constructing the metal-ligand coordination through an enzyme-regulated strategy. The hydrogel could quickly gelatinize in the surrounding environment, corresponding to the violent exothermic phenomenon, and exhibit extraordinary self-healing behavior. The molecular dynamics simulation of the hydrogel confirmed the more stable coordinated configuration from Fe(III)-chelates than Fe(II)-chelates. The morphology, mechanical property, antibacterial, and cytotoxicity of the prepared hydrogel were also studied. Our results indicated that galactomannan hydrogel based on the metal-ligand networks could balance the kinetic stability and intrinsic healability through the enzyme-induced route, which provide a new perspective in the field of biomaterial applications.

Mapping 3D Printability of Ionically Cross-Linked Cellulose Nanocrystal Inks: Architecting from Nano- to Macroscale Structures

Engineering the rheological properties of colloidal inks is one of the main challenges in achieving high-fidelity 3D printing. Herein, we provide a comprehensive study on the rheological behavior of inks based on cellulose nanocrystals (CNCs) in the presence of given salts to enable high-quality 3D printing. The rheological properties of the CNC suspensions are tailored by considering the nature of the electrolyte (i.e., 10 types of salts featuring different ion sizes, charge numbers, and inter- and intra-molecular interactions) at various concentrations (25-100 mM). A high printing fidelity is achieved in a narrow CNC and salt concentration range, significantly depending on the salt type. The structure-property relationship is explored in a "3D-printing" space (2D map), introducing a guideline for researchers active in this field. To further unravel the effect of salt type on morphological properties, CNC aerogels are developed by freeze-drying the printed structures. The results illustrate that enhancing viscoelastic properties render a denser structure featuring smaller pores.

Towards Ready-to-Use Iron-Crosslinked Alginate Beads as Mesenchymal Stem Cell Carriers

Micro-carriers, thanks to high surface/volume ratio, are widely studied as mesenchymal stem cell (MSCs) in vitro substrate for proliferation at clinical rate. In particular, Ca-alginate-based biomaterials (sodium alginate crosslinked with CaCl₂) are commonly investigated. However, Ca-alginate shows low bioactivity and requires functionalization, increasing labor work and costs. In contrast, films of sodium alginate crosslinked with iron chloride (Fe-alginate) have shown good bioactivity with fibroblasts, but MSCs studies are lacking. We propose a first proof-of-concept study of Fe-alginate beads supporting MSCs proliferation without functionalization. Macro- and micro-carriers were prepared (extrusion and electrospray) and we report for the first time Fe-alginate electrospraying optimization. FTIR spectra, stability with various mannuronic acids/guluronic acids (M/G) ratios and size distribution were analyzed before performing cell culture. After confirming literature results on films with human MSCs, we showed that Macro-Fe-alginate beads offered a better environment for MSCs adhesion than Ca-alginate. We concluded that Fe-alginate beads showed great potential as ready-to-use carriers.

The Fabrication of Alginate–Carboxymethyl Cellulose-Based Composites and Drug Release Profiles

Recently, hydrogels based on natural water-soluble polysaccharides have attracted more and more attention due to their favorable characteristics. The high water-holding capacity, lack of toxicity, and biodegradability of such hydrogels make it possible to develop new materials on their basis for biotechnological, biomedical, pharmacological, and medical purposes. Sodium alginate is a non-toxic natural polysaccharide found in marine algae. It is capable of forming solid gels under the action of polyvalent cations that cross-link polysaccharide chains. Alginate-based products are popular in many industries, including food processing, pharmaceutical, and biomedical applications. Cellulose is the most abundant, renewable, and natural polymer on Earth, and it is used for various industrial and biomedical applications. Carboxymethyl cellulose (CMC) is useful in pharmaceutical, food, and non-food industries such as tablets, ice cream, drinks, toothpaste, and detergents. In this review, various methods for the preparation of the compositions based on sodium alginate and CMC using different crosslinking agents have been collected for the first time. Additionally, the drug release profile from such polymer matrixes was analyzed.

Development, characterization and In-vitro evaluation of guar gum based new polymeric matrices for controlled delivery using metformin HCl as model drug

Currently, hydrogels are considered as ideal biomaterials due to their unique structure and characteristics that facilitates considerable hydrophilicity, swelling, drug loading and release. In this study, we report pH-responsive GG-MAA-AMPS hydrogel delivery system prepared via free radical polymerization technique. Hydrogels were loaded with Metformin HCl as a model drug. Hydrogels were characterized through Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM). FTIR confirmed the successful crosslinking of reactants, hydrogel network formation and drug loading. TGA and DSC proved the higher thermal stability of reactants after crosslinking and drug loading. XRD analysis showed decrease in crystallinity of drug after loading into the hydrogels. SEM revealed smooth and glassy appearance of both loaded and unloaded hydrogels. Gel content was increased with increase in concentration of reactants. Drug entrapment was decreased by increasing concentration of GG and AMPS while MAA acted inversely. Hydrogels displayed pH-dependent swelling and drug release behavior being high at pH 6.8 and 7.4 while low at acidic pH (1.2). Oral tolerability in rabbits showed that hydrogels were safe without causing any hematological or histopathological changes in healthy rabbits. Based on the obtained results, GG-MAA-AMPS can be considered as potential carrier for metformin HCl as well as other hydrophilic drugs.

pH Sensitive Pluronic Acid/Agarose-Hydrogels as Controlled Drug Delivery Carriers: Design, Characterization and Toxicity Evaluation

The objective of this study was to fabricate and evaluate a pH sensitive cross-linked polymeric network through the free radical polymerization technique for the model drug, cyclophosphamide, used in the treatment of non-Hodgkin's lymphoma. The Hydrogels were prepared using a polymeric blend of agarose, Pluronic acid, glutaraldehyde, and methacrylic acid. The prepared hydrogels were characterized for drug loading (%), swelling pattern, release behavior, the ingredient's compatibility, structural evaluation, thermal integrity, and toxicity evaluation in rabbits. The new polymer formation was evident from FTIR findings. The percentage loaded into the hydrogels was in the range of 58.65-75.32%. The developed hydrogels showed significant differences in swelling dynamics and drug release behavior in simulated intestinal fluid (SIF) when compared with simulated gastric fluid (SGF). The drug release was persistent and performed in a controlled manner for up to 24 h. A toxicity study was conducted on white albino rabbits. The developed hydrogels did not show any signs of ocular, skin, or oral toxicity; therefore, these hydrogels can be regarded as safe and potential carriers for controlled drug delivery in biomedical applications.

Microencapsulating Alginate-Based Polymers for Probiotics Delivery Systems and Their Application

Probiotics exhibit many health benefits and a great potential for broad applications in pharmaceutical fields, such as prevention and treatment of gastrointestinal tract diseases (irritable bowel syndrome), prevention and therapy of allergies, certain anticancer effects, and immunomodulation. However, their applications are limited by the low viability and metabolic activity of the probiotics during processing, storage, and delivery in the digestive tract. To overcome the mentioned limitations, probiotic delivery systems have attracted much attention. This review focuses on alginate as a preferred polymer and presents recent advances in alginate-based polymers for probiotic delivery systems. We highlight several alginate-based delivery systems containing various types of probiotics and the physical and chemical modifications with chitosan, cellulose, starch, protein, fish gel, and many other materials to enhance their performance, of which the viability and protective mechanisms are discussed. Withal, various challenges in alginate-based polymers for probiotics delivery systems are traced out, and future directions, specifically on the use of nanomaterials as well as prebiotics, are delineated to further facilitate subsequent researchers in selecting more favorable materials and technology for probiotic delivery.

Integrated Instillation Technology for the Synthesis of a pH-Responsive Sodium Alginate/Biomass Charcoal Soil Conditioner for Controlled Release of Humic Acid and Soil Remediation

In this work, pH-responsive gel spheres for controlled release of humic acid (CSGCHs) were prepared by an integrated instillation technology using a composite material of sodium alginate (SA) and charcoal activated carbon (CAC) as a carrier, and their slow-release performance, pH-responsive performance, and soil amendment performance were investigated. The results showed that the prepared CSGCH was uniform in size with obvious base responsiveness. Soil remediation experiments revealed that CSGCH could play a good role in the remediation of different types of soils. After 50 days of remediation, the content of nutrients and organic matter in the soil increased significantly and the pH and salt content of saline soils decreased by 15.2 and 29.8%, respectively. The plant experiment showed that CSGCH could effectively promote the growth of crops. Therefore, the prepared soil conditioner has a great potential value for improving soil conditions and promoting crop growth in agricultural applications.

Dual-drug delivery system based on the hydrogels of alginate and sodium carboxymethyl cellulose for colorectal cancer treatment

To improve the efficacy of chemotherapy and relieve the pain associated with colorectal cancer, a dual-drug delivery system (DDDS) is proposed. In this system, methotrexate (MTX) loaded CaCO₃ (CaCO₃/MTX) and aspirin (Asp) are co-entrapped in the hydrogels of alginate (Alg) and sodium carboxymethyl cellulose (CMC) crosslinked with Ca²⁺. The hydrogels can protect the anti-cancer drug of MTX from being absorbed in stomach and small intestine and ensure their efficacy at the target site of colorectum. More importantly, dual pH-responsive drug delivery can be achieved by the DDDS. Because the pH varies at small intestine and colorectum of human body, dual pH-responsive delivery of Asp and MTX can be achieved at the two organs, respectively, in response to ambient pH. These finding are of significant importance for medical science and pharmaceutics.

pH-Responsive Succinoglycan-Carboxymethyl Cellulose Hydrogels with Highly Improved Mechanical Strength for Controlled Drug Delivery Systems

Carboxymethyl cellulose (CMC)-based hydrogels are generally superabsorbent and biocompatible, but their low mechanical strength limits their application. To overcome these drawbacks, we used bacterial succinoglycan (SG), a biocompatible natural polysaccharide, as a double crosslinking strategy to produce novel interpenetrating polymer network (IPN) hydrogels in a non-bead form. These new SG/CMC-based IPN hydrogels significantly increased the mechanical strength while maintaining the characteristic superabsorbent property of CMC-based hydrogels. The SG/CMC gels exhibited an 8.5-fold improvement in compressive stress and up to a 6.5-fold higher storage modulus (G') at the same strain compared to the CMC alone gels. Furthermore, SG/CMC gels not only showed pH-controlled drug release for 5-fluorouracil but also did not show any cytotoxicity to HEK-293 cells. This suggests that SG/CMC hydrogels could be used as future biomedical biomaterials for drug delivery.

Improved functionality of Ligilactobacillus salivarius Li01 in alleviating colonic inflammation by layer-by-layer microencapsulation

The low viability during gastrointestinal transit and poor mucoadhesion considerably limits the effectiveness of Ligilactobacillus salivarius Li01 (Li01) in regulating gut microbiota and alleviating inflammatory bowel disease (IBD). In this study, a delivery system was designed through layer-by-layer (LbL) encapsulating a single Li01cell with chitosan and alginate. The layers were strengthened by cross-linking to form a firm and mucoadhesive shell (~10 nm thickness) covering the bacterial cell. The LbL Li01 displayed improved viability under simulated gastrointestinal conditions and mucoadhesive function. Almost no cells could be detected among the free Li01 after 2 h incubation in digestive fluids, while for LbL Li01, the total reduction was around 3 log CFU/mL and the viable number of cells remained above 6 log CFU/mL. Besides, a 5-fold increase in the value of rupture length and a two-fold increase in the number of peaks were found in the (bacteria-mucin) adhesion curves of LbL Li01, compared to those of free Li01. Oral administration with LbL Li01 on colitis mice facilitated intestinal barrier recovery and restoration of the gut microbiota. The improved functionality of Li01 by LbL encapsulation could increase the potential for the probiotic to be used in clinical applications to treat IBD; this should be explored in future studies.

A double-layer hydrogel based on alginate-carboxymethyl cellulose and synthetic polymer as sustained drug delivery system

A new double-layer, pH-sensitive, composite hydrogel sustained-release system based on polysaccharides and synthetic polymers with combined functions of different inner/outer hydrogels was prepared. The polysaccharides inner core based on sodium alginate (SA) and carboxymethyl cellulose (CMC), was formed by physical crosslinking with pH-sensitive property. The synthetic polymer out-layer with enhanced stability was introduced by chemical crosslinking to eliminate the expansion of inner core and the diffusion of inner content. The physicochemical structure of the double-layer hydrogels was characterized. The drug-release results demonstrated that the sustained-release effect of the hydrogels for different model drugs could be regulated by changing the composition or thickness of the hydrogel layer. The significant sustained-release effect for BSA and indomethacin indicated that the bilayer hydrogel can be developed into a novel sustained delivery system for bioactive substance or drugs with potential applications in drugs and functional foods.

Fabrication of an injectable iron (III) crosslinked alginate-hyaluronic acid hydrogel with shear-thinning and antimicrobial activities

The combination of alginate, hyaluronic acid and multivalent ions have been reported to form alginate-hyaluronic acid ionic-crosslinking hydrogels for biomedical applications. However, injectable alginate-hyaluronic acid ionic-crosslinking hydrogels with satisfactory shear-thinning property have rarely been reported. In this study, we successfully developed an ionic-crosslinked alginate-hyaluronic acid hydrogel by simple assembly of alginate-hyaluronic acid mixture and Fe³⁺ complex. This hydrogel could fully recover within seconds after damaged, while displayed shear thinning behavior and good injectability which were contributed by the reversible and dynamic metal-ligand interactions formed via ferric ions and carboxyl groups of the polymers. Moreover, the local degradation of this hydrogel giving the hydrogel sustained ferric ions release property, of which led to potential long-term antibacterial activities against multiple types of bacteria including gram-negative Escherichia coli and gram-positive Staphylococcus aureus, as well as representative oral pathogenic bacteria Streptococcus mutans and Porphyromonas gingivalis.

Hydrogel beads-based nanocomposites in novel drug delivery platforms: Recent trends and developments

The present article evaluates the composition and synthesis of hydrogel beads. Hydrogels, owing to their known biocompatibility, are widely used in drug delivery as a host (or drug carrier). Hydrogels, owing to their physical, chemical and biological properties, are popular in many aspects. Hydrogels are crosslinked-hydrophilic polymers and commercialized/synthesized in both natural and synthetic forms. These polymers are compatible with human tissues, therefore can be potentially used for biomedical treatments. Hydrogels in drug delivery offer several points of interest such as sustainability, and sensitivity without any side-effects as compared to traditional methods in this field. Drugs can encapsulate and release continuously into the targets when hydrogels are activated/modified magnetically or by fluorescent materials. It is crucial to develop new crosslinked polymers in terms of "biocompatibility" and "biodegradability" for novel drug delivery platforms. In the event that the accomplishments of the past can be used into the longer terms, it is exceedingly likely that hydrogels with a wide cluster of alluring properties can be synthesized. The current review, offers an updated summary of latest developments in the nanomedicines field as well as nanobased drug delivery systems over broad study of the discovery/ application of nanomaterials in improving both the efficacy of drugs and targeted delivery of them. The challenges/opportunities of nanomedicine in drug delivery also discussed. SCOPE OF THE RESEARCH: Although several reviews have been published in the field of hydrogels, however many of them have just centralized on the general overviews in terms of "synthesis" and "properties". The utilization of hydrogels and hydrogel-based composites in vital applications have been achieved a great interest. In this review, our aim is to recap of the key points in the field of hydrogels such as; a) hydrogel nanocomposites, b) magnetic beads, c) biomedical applications, and d) drug delivery. In the same vein, these outlines will be expanded with emphasizing on the boon of magnetic beads and recent developments in this area.

Preparation of aerogel beads and microspheres based on chitosan and cellulose for drug delivery: A review

Spherical aerogels are not easily broken during use and are easier to transport and store which can be used as templates for drug delivery. This review summarizes the possible approaches for the preparation of aerogel beads and microspheres based on chitosan and cellulose, an overview to the methods of manufacturing droplets is presented, afterwards, the transition mechanisms from sol to a spherical gel are reviewed in detail followed by different drying processes to obtain spherical aerogels with porous structures. Additionally, a specific focus is given to aerogel beads and microspheres to be regarded as drug delivery carriers. Furthermore, a core/shell architecture of aerogel beads and microspheres for controlled drug release is described and subjected to inspire readers to create novel drug release system. Finally, the conclusions and outlooks of aerogel beads and microspheres for drug delivery are summarized.

A sodium alginate-based sustained-release IPN hydrogel and its applications

Interpenetrating polymer network (IPN) hydrogels are crosslinked by two or more polymer networks, providing free volume space in the three-dimensional network structure, and providing conditions for the sustained and controlled release of drugs. The IPN hydrogels based on the natural polymer sodium alginate can form a stable porous network structure. Due to its excellent biocompatibility, the loaded drug can be sustained to the maximum extent without affecting its pharmacological effect. Sodium alginate-based IPN hydrogels have broad application prospects in the field of sustained and controlled drug release. This paper begins with an overview of the formation of alginate-based IPN hydrogels; summarizes the types of alginate-based IPN hydrogels; and discusses the pharmaceutical applications of alginate-based IPN hydrogels. We aim to give an overview of the research on IPN hydrogels based on sodium alginate in sustained and controlled drug release systems.

Mechanically enhanced graphene oxide/carboxymethyl cellulose nanofibril composite fiber as a scalable adsorbent for heavy metal removal

Recently, graphene oxide(GO) has gained much attention for heavy metal removal due to its high surface area and lots of functional groups on the surface. However, GO itself in powder form is far away from practical adsorbents because it remains dispersed in liquid phase which causes difficulty in the separation from effluent. In this study, GO/carboxymethyl cellulose nanofibril (CMCNF) composite fiber(CF) is developed as an efficient and durable adsorbent. Cross-linked GO/CMCNF CF was continuously produced by employing Fe³⁺ ion as a coagulant during a typical wet-spinning process. Based on multiple interactions such as ionic bonding and electrostatic interactions between Fe³⁺ and carboxyl group on CMCNF, the CF exhibits enhanced mechanical property than pure GO fiber. GO/CMCNF-Fe³⁺ CF showed efficient lead (Pb²⁺) uptake with successful adsorbent recovery, which indicates durable and cost-competitive fiber type adsorbent for heavy metal ions.

Preparation of Succinoglycan Hydrogel Coordinated With Fe3+ Ions for Controlled Drug Delivery

Hydrogel materials with a gel-sol conversion due to external environmental changes have potential applications in a wide range of fields, including controlled drug delivery. Succinoglycans are anionic extracellular polysaccharides produced by various bacteria, including Sinorhizobium species, which have diverse applications. In this study, the rheological analysis confirmed that succinoglycan produced by Sinorhizobium meliloti Rm 1021 binds weakly to various metal ions, including Fe2+ cations, to maintain a sol form, and binds strongly to Fe3+ cations to maintain a gel form. The Fe3+-coordinated succinoglycan (Fe3+-SG) hydrogel was analyzed by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, circular dichroism (CD), and field-emission scanning electron microscopy (FE-SEM). Our results revealed that the Fe3+ cations that coordinated with succinoglycan were converted to Fe2+ by a reducing agent and visible light, promoting a gel-sol conversion. The Fe3+-SG hydrogel was then successfully used for controlled drug delivery based on gel-sol conversion in the presence of reducing agents and visible light. As succinoglycan is nontoxic, it is a potential material for controlled drug delivery.

Effective removal of Cu(II) from aqueous solution over graphene oxide encapsulated carboxymethylcellulose-alginate hydrogel microspheres: towards real wastewater treatment plants

In the current study, the graphene oxide (GO) encapsulated carboxymethyl cellulose-Alginate (CMC-Alg) hydrogel microspheres were prepared via ionotropic gelation method and characterized using FTIR, TGA, SEM-EDS and surface charge by determining pH_pzc. The adsorption of Cu²⁺ ions from aqueous solution on the graphene oxide embedded CMC-Alg was studied under different experimental conditions, and the results showed that embedded beads had high adsorption capacity compared with pure CMC-Alg beads due to synergetic effect between functional groups GO and CMC-Alg matrix. Adsorption capacities at equilibrium were calculated experimentally as 22.10, 39.96, 41.72 and 64 mg/g for pure CMC-Alg, CMC-Alg/GO 1%, CMC-Alg/GO 3% and CMC-Alg/GO 5%, respectively. The adsorption kinetics were found to follow the pseudo-second-order, and the equilibrium data fitted well with the Langmuir adsorption isotherm. Moreover, the intraparticle diffusion model has been inspected pointing that the adsorption process was found to be sequence of surface adsorption and intraparticle diffusion (IPD). The results suggest that graphene oxide embedded CMC-Alg bead matrix can be efficiently used as an adsorbent for metal ions removal from wastewater.

Development of microcrystalline cellulose based hydrogels for the in vitro delivery of Cephalexin

Three hydrogels namely, microcrystalline cellulose (MCC), microcrystalline cellulose-carboxymethyl cellulose (MCC-CMC) and microcrystalline cellulose-xylan (MCC-xylan) are synthesized using ethylene glycol diglycidyl ether as crosslinker. For the chemical characterization, FT-IR spectroscopy is adopted, whereas gel fraction and swelling ratio are used for the physical characterization of the hydrogels. Coarse morphology of hydrogels is further visualized by microscopic observation. The rheological characterization proves that MCC-CMC gel withstands higher strain to resist permanent deformation than the other two gels. The hydrogels are used for the loading and in vitro release of Cephalexin. The in vitro delivery is carried out in various simulated body fluids such as phosphate buffer saline (PBS), artificial intestinal fluid (AIF) and artificial gastric fluid (AGF). MCC-CMC is observed to deliver Cephalexin individually 15% in AGF, 86% in AIF, 98% in PBS and 98% in consecutive buffers (AGF followed by AIF and PBS).