Enhanced defluoridation and facile separation of magnetic nano-hydroxyapatite/alginate composite

Highly efficient mesoporous aluminium-magnetite-alginate magnetic composite for defluoridation of water

One of the few elements that can have negative health impacts in both conditions, when consumed in excess or insufficiency is fluoride. In current study, aluminium magnetite alginate composite (AMA) was fabricated and applied using batch adsorption of fluoride as well as by using statistical modelling. Heterogeneous surface as revealed from scanning electron micrograph, thermal stability shown by thermal studies, high surface area of 29.77 m2 g-1, pore volume 0.1987 cm3 g-1 with mesoporous structure having average pore radius of 133 Å shown by BET analysis, fare degree of magnetization from VSM analysis were the important features of this material. Screening experiments and batch trials were carried out to obtain optimum working conditions. pH of 3.0, dosage of 50 mg, interaction period of 60 min and concentration of 50 mg L-1 depicted maximum defluoridation efficacy of about 94%. The adsorption capacity was found to be 60.08 mg g-1 in accordance with Langmuir adsorption isotherm, while pseudo second order kinetics was followed. Overall effects of various factors on sorption process were optimized using response surface methodology (RSM). Regeneration potential of AMA has been demonstrated for 10 adsorption-desorption cycles, showing more than 60% efficiency in tenth cycle. The AMA composite shows E-factor value 0.004 depicting it is sustainable in environment. In short, this novel composite showed excellent morphological, magnetic, functional properties that led to enhanced adsorption efficiency in short span of time that can be regenerated and reused in multiple cycles.

Surface modifications of biopolymers for removal of per- and polyfluoroalkyl substances from water: Current research and perspectives

Per- and polyfluoroalkyl substances (PFAS) are highly recalcitrant organic contaminants that have attracted ever-increasing attention from the general public, government agencies and scientific communities. To remove PFAS from water, especially the enormous volume of drinking water, stormwater, and groundwater, sorption is the most practical approach. Success of this approach demands green, renewable, and sustainable materials for capturing PFAS at ng/L or µg/L levels. To meet this demand, this manuscript critically reviewed sorbents developed from biopolymers, such as chitosan (CTN), alginate (ALG), and cellulose (CEL) covering the period from 2008 to 2023. The use of different cross-linkers for the surface modifications of biopolymers were described. The underlying removal mechanism of biosorbents for PFAS adsorption from molecular perspectives was discussed. Besides reviewing and comparing the performance of different bio-based sorbents with respect to environmental factors like pH, and sorption kinetics and capacity, strategies for modifying biosorbents for better performance were proposed. Additionally, approaches for regeneration and reuse of the biosorbents were discussed. This was followed by further discussion of challenges facing the development of biosorbents for PFAS removal.

The model and mechanism of adsorptive technologies for wastewater containing fluoride: A review

With the continuous development of society, industrialization, and human activities have been producing more and more pollutants. Fluoride discharge is one of the main causes of water pollution. This review summarizes various commonly used and effective fluoride removal technologies, including ion exchange technology, electrochemical technology, coagulation technology, membrane treatment, and adsorption technology, and points out the outstanding advantages of adsorption technology. Various commonly used fluoride removal techniques as well as typical adsorbent materials have been discussed in published papers, however, the relationship between different adsorbent materials and adsorption models has rarely been explored, therefore, this paper categorizes and summarizes the various models involved in static adsorption, dynamic adsorption, and electrosorption fluoride removal processes, such as pseudo-first-order and pseudo-second-order kinetic models, Langmuir and Freundlich isotherm models, Thomas and Clark dynamic adsorption models, including the mathematical equations of the corresponding models and the significance of the models are also comprehensively summarized. Furthermore, this comprehensive discussion delves into the fundamental adsorption mechanisms, quantification of maximum adsorption capacity, evaluation of resistance to anion interference, and assessment of adsorption regeneration performance exhibited by diverse adsorption materials. The selection of the best adsorption model not only predicts the adsorption performance of the adsorbent but also provides a better description and understanding of the details of each part of the adsorption process, which facilitates the adjustment of experimental conditions to optimize the adsorption process. This review may provide some guidance for the development of more cost-effective adsorbent materials and adsorption processes in the future.

Surface-modified biopolymers for removing mixtures of per- and polyfluoroalkyl substances from water: Screening and removal mechanisms

Green, renewable, and sustainable materials are needed for removing per- and polyfluoroalkyl substances (PFASs) in water. Herein, we synthesized and tested alginate (ALG) and chitosan (CTN) based and polyethyleneimine (PEI) functionalized fibers/aerogels for the adsorption of mixtures of 12 PFASs (9 short- and long-chain PFAAs, GenX, and 2 precursors) from water at an initial concentration of 10 μg/L each. Out of 11 biosorbents, ALGPEI-3 and GTH CTNPEI aerogels had the best sorption performance. Through detailed characterization of the sorbents before and after PFASs sorption, it was revealed that hydrophobic interaction was the dominant mechanism controlling PFASs sorption while electrostatic interactions played a minor role. As a result, both aerogels had fast and superior sorption of relatively hydrophobic PFASs from pH 2 to 10. Even at extreme pH conditions, the aerogels retained their shape perfectly. Based upon the isotherms, the maximum adsorption capacity of ALGPEI-3 and GTH-CTNPEI aerogels towards total PFASs removal was 3045 and 12,133 mg/g, respectively. Although the sorption performance of the GTH-CTNPEI aerogel toward short chain PFAS was less than satisfactory and varied between 70 and 90% in 24 h, it may find its use in removing relatively hydrophobic PFAS at high concentrations in complex and extreme environments.

Fabrication of nano-biocomposite for the removal of Eriochrome Black T and malachite green from aqueous solution: isotherm and kinetic studies

The increasing generation of toxic dye wastewater from various enterprises continues to be a serious public health issue and happens to be of environmental concern, posing a significant challenge to existing conventional water treatment facilities. Malachite green (MG) and Eriochrome Black T (EBT) are extremely hazardous and carcinogenic substances; hence it is crucial to remove them from water bodies. A well-known cleaner, more economical, and environmentally friendly treatment method is adsorption. The kind of adsorbent material employed determines how well the treatment procedure works. A physiologically compatible nanocomposite adsorbent (HAP@CT@MNP) was fabricated from laboratory synthesized hydroxyapatite (HAP) and magnetite (MNP) for its application in the wastewater remediation process. The ability of the fabricated nanocomposite to remove the harmful dyes EBT and MG from a simulated wastewater was evaluated. The impact of operational parameters including pH, adsorbate concentration, adsorbent dose, contact time, and temperature was examined to gauge the maximum adsorption capacity of the developed nanocomposite. The optimum pH for the eradication of EBT and MG were found to be 3 and 7.4, respectively. The maximum capacity evaluated was 222 mg/g and 500 mg/g at room temperature and at contact time of 50 and 40 min respectively. The binding of either EBT or MG followed the monolayer Langmuir model and kinetic studies revealed the suitability of pseudo-second-order model. Studies using spectroscopy and isotherm modeling showed that the main mechanism controlling the adsorption of EBT and MG onto HAP@CT@MNP is physisorption. The efficacy of the adsorbent to be reused with 8% loss in its efficiency reveals the economic viability of HAP@CT@MNP. The current work showed that a biocompatible nanocomposite could be successfully fabricated and used as an enhanced adsorbent for the quick and effective removal of the toxic dyes EBT and MG from wastewater.

Applications of Nano Hydroxyapatite as Adsorbents: A Review

Nano hydroxyapatite (Ca10(PO4)6(OH)2, HAp) has aroused widespread attention as a green and environmentally friendly adsorbent due to its outstanding ability in removing heavy metal ions, radio nuclides, organic pollutants and fluoride ions for wastewater treatment. The hexagonal crystal structure of HAp supports the adsorption mechanisms including ionic exchange reaction, surface complexation, the co-precipitation of new partially soluble phases and physical adsorption such as electrostatic interaction and hydrogen bonding. However, nano HAp has some drawbacks such as agglomeration and a significant pressure drop during filtration when used in powder form. Therefore, instead of using nano HAp alone, researchers have worked on modificationsand composites of nano HAp to overcome these issues and enhance the adsorption capacity. The modification of cationic doping and organic molecule grafting for nano HAp can promote the immobilization of ions and then increase adsorption capacity. Developing nano HAp composite with biopolymers such as gelatin, chitosan and chitin has proven to obtain a synergetic effect for improving the adsorption capacity of composites, in which nano HAp fixed and dispersed in polymers can playmuch more of a role for adsorption. This review summarizes the adsorption properties and adsorbent applications of nano HAp as well as the methods to enhance the adsorption capacity of nano HAp.

Biopolymer-Based Nanohydroxyapatite Composites for the Removal of Fluoride, Lead, Cadmium, and Arsenic from Water

In this study, hydroxyapatite (HAP) nanocomposites were prepared with chitosan (HAP-CTS), carboxymethyl cellulose (HAP-CMC), alginate (HAP-ALG), and gelatin (HAP-GEL) using a simple wet chemical in situ precipitation method. The synthesized materials were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Brunauer-Emmett-Teller surface area analysis, and thermogravimetric analysis. This revealed the successful synthesis of composites with varied morphologies. The adsorption abilities of the materials toward Pb(II), Cd(II), F-, and As(V) were explored, and HAP-CTS was found to have versatile adsorption properties for all of the ions, across a wide range of concentrations and pH values, and in the presence of common ions found in groundwater. Additionally, X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy confirmed the affinity of HAP-CTS toward multi-ion mixture containing all four ions. HAP-CTS was hence engineered into a more user-friendly form, which can be used to form filters through its combination with cotton and granular activated carbon. A gravity filtration study indicates that the powder form of HAP-CTS is the best sorbent, with the highest breakthrough capacity of 3000, 3000, 2600, and 2000 mL/g for Pb(II), Cd(II), As(V), and F-, respectively. Hence, we propose that HAP-CTS could be a versatile sorbent material for use in water purification.

Copper nickel co-impregnation of Moroccan yellow clay as promising catalysts for the catalytic wet peroxide oxidation of caffeine

Copper and nickel were incorporated into the prepared yellow clay (YC) using one of the most widely used methods, for the preparation of heterogeneous catalysts, which is the wet impregnation method (IPM) and its application as a heterogeneous catalyst for Caffeine (CAF). Several catalysts Cooper Nickel's Catalysts (Cu–Ni) were applied to the yellow clay with different weight ratio of Cu and Ni, in order to explore the role of both metals during the catalytic oxidation process CWPO. Furthermore, the CuNi-YC catalysts, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), Langmuir's surface area, Brunauer Emmett Teller (BET), scanning electron microscope (SEM) and inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES), so as to get a better understanding concerning the catalytic activity's behavior of CuNi-YC catalysts. The optimization of the catalytic activity's effects on the different weight ratios of Cu and Ni, temperature and H₂O₂ were also examined, using Box-Behnken Response Surface Methodology RSM to enhance the CAF conversion. The analysis of variances (ANOVA) demonstrates that Box-Behnken model was valid and the CAF conversion reached 86.16%, when H₂O₂ dosage was equal to 0.15 mol.L⁻¹, copper impregnated (10%) and temperature value attained 60 °C. In addition, the regeneration of catalyst's cycles under the optimum conditions, indicated the higher stability up to four cycles without a considerable reduction in its conversion performance.

Enhanced Cr(VI) removal from water using a green synthesized nanocrystalline chlorapatite: Physicochemical interpretations and fixed-bed column mathematical model study

Apatite-based minerals have attracted much attention in the remediation of heavy metal-contaminated environment. However, exploring apatite with efficient adsorption performance for inorganic oxyanions such as Cr(VI) remains a challenge. Herein, a novel nanocrystalline chlorapatite (ClAP) was promptly prepared by a green method using eggshell wastes as calcium source with the purpose to enhance Cr(VI) adsorption capability. The generated ClAP was characterized by XRD, SEM-EPMA, TEM, FTIR, and BET analyses. Batch and column experiments were subsequently carried out to explore the influencing factors, adsorption capacity and removal mechanism. Results showed that ClAP exhibited excellent stability and adsorption performance for Cr(VI) (63.47 mg g^-1), which was much greater than that of hydroxyapatite and most reported materials. The adsorption process was fitted well by the pseudo-second-order model and the Langmuir model. In fixed bed column experiments, a novel time-fractional derivative model exhibited much better suitability in interpreting the observed breakthrough curves of Cr(VI) than traditional models. Furthermore, the reusability of ClAP in column was evaluated. Results showed that the adsorption capacity maintained well after consecutively reused for five cycles. Studies of the effect of pH, as well as FTIR and XPS investigations indicated that Cr(VI) adsorption was mainly ascribed to electrostatic interactions and surface complexation, while the reduction of Cr(VI) to the low-toxicity Cr(III) also existed in the adsorption process. The ClAP adsorbent was also successfully used for Cr(VI) remediation from real wastewater. Hence, nanocrystalline ClAP can be a promising material for enhancing the elimination of oxyanion contaminants such as Cr(VI) from water.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Removal of fluoride ion from aqueous solutions by titania-grafted β-cyclodextrin nanocomposite

TiO₂-grafted β-cyclodextrin nanocomposite was synthesized by treating the triazole modified β-cyclodextrin with the amino functionalized titanium dioxide nanoparticles, and applied for removal of fluoride ion from aqueous media by batch technique. The structural changes of nanocomposite before and after fluoride sorption were characterized using BET, BJH, AFM, and elemental mapping based on EDX analyses. The adsorption parameters including pH, adsorbent dosage, contact time, temperature, initial fluoride ion concentration, and coexisting anions have been investigated to determine the optimal adsorption conditions. The experimental data were evaluated by the Langmuir, Freundlich, and Temkin isotherms, and the pseudo-first order, pseudo-second order, and intraparticle diffusion kinetic models. Evaluation of experimental data with adsorption isotherms, Langmuire (R² = 0.9988 and Q_max = 48.78 mg g^-1), Temkin (R² = 0.9939), and Freundlich (n_F = 2.73) reveals the high adsorption efficiency of nanocomposite and suggests a monolayer chemical adsorption for fluoride ions. The adsorption experimental data fitted well with the pseudo-second order kinetic model, suggesting that a chemical sorption is involved in the rate-determining step. Thermodynamic parameters (ΔG° < 0, ΔH° > 0 and ΔS° > 0) confirmed the spontaneity, feasibility, and endothermic nature of fluoride sorption. The nanoadsorbent was regenerated in NaOH solution and reused for three adsorption-desorption cycles. The adsorption results represented the nanocomposite as a potential adsorbent for the fluoride ions removal from aqueous solutions.

Highly Tough, Biocompatible, and Magneto-Responsive Fe3O4/Laponite/PDMAAm Nanocomposite Hydrogels

Magneto-responsive hydrogels (MRHs) have attracted considerable attention in various applications owing to their smart response to an externally applied magnetic field. However, their practical uses in biomedical fields are limited by their weak mechanical properties and possible toxicity to the human body. In this study, tough, biocompatible, and magneto-responsive nanocomposite hydrogels (MR_NCHs) were developed by the in-situ free-radical polymerization of N, N-dimethylacrylamide (DMAAm) and laponite and Fe3O4 nanoparticles. The effects of the concentrations of DMAAm, water, and laponite and Fe3O4 nanoparticles in the pre-gel solutions or mixtures on the viscoelastic and mechanical properties of the corresponding hydrogels were examined by performing rheological and tensile tests, through which the mixture composition producing the best MR_NCH system was optimized. The effects were also explained by the possible network structures of the MR_NCHs. Moreover, the morphology, chemical structure, and thermal and mechanical properties of the MR_NCHs were analyzed, while comparing with those of the poly(DMAAm) (PDMAAm) hydrogels and laponite/PDMAAm NCHs. The obtained optimal MR_NCH exhibited noticeable magnetorheological (MR) behavior, excellent mechanical properties, and good biocompatibility. This study demonstrates how to optimize the best Fe3O4/laponite/PDMAAm MR_NCH system and its potential as a soft actuator for the pharmaceutical and biomedical applications.

Polyvinyl alcohol-based nanocomposite hydrogels containing magnetic laponite RD to remove cadmium

In this study, magnetic nanocomposite hydrogels based on polyvinyl alcohol were synthesized. Magnetic polyvinyl alcohol/laponite RD (PVA-mLap) nanocomposites were characterized by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. The results indicated that PVA-mLap had desirable magnetic-sorption properties and magnetic-laponite nanoparticles were successfully synthesized and added to polyvinyl alcohol. The present nanocomposites were applied to remove Cd²⁺ from aqueous solution. The influence of initial Cd²⁺ concentration, magnetic-laponite concentration, pH, and ionic strength on adsorption isotherm was investigated. Heterogeneity of adsorption sites was intensified by increasing magnetic concentration of adsorbents and by rising pH value. Results of ionic strength studies indicated that by increasing ionic strength more than four times, the adsorption of Cd²⁺ has only decreased around 15%. According to the results, the dominant mechanism of Cd²⁺ sorption by the present adsorbents was determined chemical and specific sorption. Therefore, the use of the present nanocomposites as a powerful adsorbent of Cd²⁺ in the wastewater treatment is suggested. Isotherm data were described by using Freundlich and Langmuir models, and better fitting was introduced Langmuir model.

Performance and mechanism of hierarchically porous Ce–Zr oxide nanospheres encapsulated calcium alginate beads for fluoride removal from water

Hierarchically porous Ce–Zr metal oxide nanospheres encapsulated calcium alginate millimeter-sized beads showed a high efficiency for fluoride removal from water.