Controlled synthesis of N,N,N-trimethyl chitosan for modulated bioadhesion and nasal membrane permeability

Fabrication and optimization of chitosan-g-m-PEG-NH2 copolymer for advanced glioblastoma therapy using surface engineered lentinan loaded nanovesicles for nasal delivery

Glioblastoma multiforme (GBM) exhibits a high mortality with an incidence rate of 3-5 per 100,000 each year, which demands existence of newer approach for its treatment. The current study focuses on synthesis of novel lipidic nanovesicles (LNs) loaded with highly potent macromolecule Lentinan (LNT) and surface modified with methoxy poly (ethylene glycol; PEG) amine (m-PEG-NH2)-grafted-chitosan (CS) for intranasal delivery. The grafting procedure was optimized using Box Behnken design (BBD) to limit the use of organic solvents. The fabricated polymer showed enhanced aqueous solubility, biodegradability and mucoadhesion, resulting in higher nasal mucosa permeation (z = 53.52 μm). The presence of PEG enabled the sustained release of LNT till 48 h and assisted in achieving higher accumulation of LNT in CSF (41.7 ± 3.1 μg/mL) and a higher brain targeting potential of 96.3 ± 2.31 % (p < 0.05). In-vitro cellular studies showed the enhanced anti-GBM effect of LNT on U87 MG cells by reducing the cell viability (~2 times reduction in IC50 value) accompanied with large number of cells undergoing late apoptosis and death (p < 0.05) because of the higher cellular uptake (63.22 ± 3.01 ng/100 cells) of novel formulation. The copolymer comprising LNs were biocompatible, stable and can be used as an effective tool in the management of GBM.

Optimizing N,N,N-trimethyl chitosan synthesis: A design of experiments (DoE) approach

This study aimed to optimize the synthesis of trimethyl chitosan (TMC) with a high degree of N,N,N-trimethylation (DTM) through a one-step procedure, minimizing reagent use, reaction time, and avoiding O-methylation, using the Design of Experiments (DoE) approach. Initially, sequential designs were done. Following the determination of the initial conditions a Fractional Factorial Design was used, investigating methyl iodide (MeI) and NaHCO3 molar ratios, temperature, and reaction time on DTM. MeI and NaHCO3 molar ratios were found to be significant (p-values equal to 0.02 and 0.02, respectively), the reaction temperature (p = 0.04) displayed a non-linear effect, while the reaction time was found to be non-significant (p = 0.93). Finally, a Full Factorial Design was done to optimize temperature and base addition methods. Incremental addition of the base was determined to be feasible without affecting the DTM, thereby preventing any viscosity-related problems. DTM was achieved up to 72 % in a one-step procedure, with no O-methylation. These optimized conditions offer a cost-effective, one-step synthesis method for TMC production, holding significant promise for industrial applications by avoiding multistep reactions, ensuring minimal reagent use, and preventing O-methylation. The findings mark a substantial advancement in TMC synthesis, presenting a streamlined and efficient approach with substantial practical implications for process development.

Promoting oral absorption of Panax notoginseng saponins via thiolated trimethyl chitosan and wheat germ agglutinin-modified nanoformulation

This study aimed to enhance the oral absorption of Panax notoginseng saponins (PNS) via nanoparticles modified with thiolated trimethyl chitosan (TMC-Cys) and wheat germ agglutinin (WGA), termed PP-WT NPs. In vitro investigations revealed that PP-WT NPs exhibited delayed release of PNS and a strong tolerance to the gastric acids and digestive enzymes. Moreover, PP-WT NPs exhibited efficient cellular uptake and transport capabilities in the Caco-2/HT29-co-cultured cell model. In vivo animal experiments demonstrated that PP-WT NPs effectively overcame the mucus layer barrier, with the effective permeability coefficients of R1, Rg1, and Rb1 in the small intestine being 1.68, 1.64, and 1.63 times higher than those of free PNS, respectively. Taken together, thiolated trimethyl chitosan and wheat germ agglutinin-modified nanoparticles hold significant potential for improving the oral absorption of PNS, representing an attractive strategy for enhanced therapeutic efficacy.

Biopolymers as promising vehicles for drug delivery to the brain

The brain is a privileged organ, tightly guarded by a network of endothelial cells, pericytes, and glial cells called the blood brain barrier. This barrier facilitates tight regulation of the transport of molecules, ions, and cells from the blood to the brain. While this feature ensures protection to the brain, it also presents a challenge for drug delivery for brain diseases. It is, therefore, crucial to identify molecules and/or vehicles that carry drugs, cross the blood brain barrier, and reach targets within the central nervous system. Biopolymers are large polymeric molecules obtained from biological sources. In comparison with synthetic polymers, biopolymers are structurally more complex and their 3D architecture makes them biologically active. Researchers are therefore investigating biopolymers as safe and efficient carriers of brain-targeted therapeutic agents. In this article, we bring together various approaches toward achieving this objective with a note on the prospects for biopolymer-based neurotherapeutic/neurorestorative/neuroprotective interventions. Finally, as a representative paradigm, we discuss the potential use of nanocarrier biopolymers in targeting protein aggregation diseases.

Rapid screening of electrochemically active bacteria based on a biocathode-functional bipolar electrode-electrochemiluminescence platform

A functional bipolar electrode-electrochemiluminescence (BPE-ECL) platform based on biocathode reducing oxygen was constructed for detecting electrochemically active bacteria (EAB) in this paper. Firstly, thiolated trimethylated chitosan quaternary ammonium salt (TMC-SH) layer was assembled on the gold-plated cathode of BPE. TMC-SH contains quaternary ammonium salt branch chain, which can inhibit the growth of microorganisms on the surface or in the surrounding environment while absorbing bacteria. Then, the peristaltic pump was used to flow all of the samples through the cathode, and the EAB was electrostatically adsorbed on the electrode surface. Finally, applying a constant potential to the BPE, bacteria can catalyze electrochemical reduction of O2, and decrease the overpotential of O2 reduction at the cathode, which in turn generates an ECL reporting intensity change at the anode. In this way, live and dead bacteria can be distinguished, and the influence of complex food substrates on detection can be greatly reduced.

Alomrani A. Optimization of Bromocriptine-Mesylate-Loaded Polycaprolactone Nanoparticles Coated with Chitosan for Nose-to-Brain Delivery: In Vitro and In Vivo Studies

Bromocriptine mesylate (BM), primarily ergocryptine, is a dopamine agonist derived from ergot alkaloids. This study aimed to formulate chitosan (CS)-coated poly ε-caprolactone nanoparticles (PCL NPs) loaded with BM for direct targeting to the brain via the nasal route. PCL NPs were optimized using response surface methodology and a Box-Behnken factorial design. Independent formulation parameters for nanoparticle attributes, including PCL payload (A), D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) concentration (B), and sonication time (C), were investigated. The dependent variables were nanoparticle size (Y1), zeta potential (Y2), entrapment efficiency (EE; Y3), and drug release rate (Y4). The optimal formulation for BM-PCL NPs was determined to be 50 mg PCL load, 0.0865% TPGS concentration, and 8 min sonication time, resulting in nanoparticles with a size of 296 ± 2.9 nm having a zeta potential of -16.2 ± 3.8 mV, an EE of 90.7 ± 1.9%, and a zero-order release rate of 2.6 ± 1.3%/min. The optimized BM-PCL NPs were then coated with CS at varying concentrations (0.25, 0.5, and 1%) to enhance their effect. The CS-PCL NPs exhibited different particle sizes and zeta potentials depending on the CS concentration used. The highest EE (88%) and drug load (DL; 5.5%) were observed for the optimized BM-CS-PCL NPs coated with 0.25% CS. The BM-CS-PCL NPs displayed a biphasic release pattern, with an initial rapid drug release lasting for 2 h, followed by a sustained release for up to 48 h. The 0.25% CS-coated BM-CS-PCL NPs showed a high level of permeation across the goat nasal mucosa, with reasonable mucoadhesive strength. These findings suggested that the optimized 0.25% CS-coated BM-CS-PCL NPs hold promise for successful nasal delivery, thereby improving the therapeutic efficacy of BM.

Surface engineering of chitosan nanosystems and the impact of functionalized groups on the permeability of model drug across intestinal tissue

Surface attributes of nanocarriers are crucial to determine their fate in the gastrointestinal (GI) tract. Herein, we have functionalized chitosan with biochemical moieties including rhamnolipid (RL), curcumin (Cur) and mannose (M). FTIR spectra of functionalized chitosan nanocarriers (FCNCs) demonstrated successful conjugation of M, Cur and RL. The functional moieties influenced the entrapment of model drug i.e., coumarin-6 (C6) in FCNCs with payload-hosting and non-leaching behavior i.e., >91 ± 2.5 % with negligible cumulative release of <2 % for 5 h in KREB, which was further verified in the simulated gastric and intestinal fluids. Consequently, substantial difference in the size and zeta potential was observed for FCNCs with different biochemical moieties. Scanning electron microscopy and atomic force microscopy of FCNCs displayed well-dispersed and spherical morphology. In addition, in vitro cytotoxicity results of FCNCs confirmed their hemocompatibility. In the ex-vivo rat intestinal models, FCNCs displayed a time-dependent-phenomenon in cellular-uptake and adherence. However, apparent-permeability-coefficient and flux values were in the order of C6-RL-FCNCs > C6-M-FCNCs > C6-Cur-FCNCs = C6-CNCs > Free-C6. Furthermore, the transepithelial electrical resistance revealed the FCNCs mediated recovery of membrane-integrity with reversible tight junctions opening. Thus, FCNCs have the potential to overcome the poor solubility and/or permeability issues of active pharmaceutical ingredients and transform the impact of functionalized-nanomedicines in the biomedical industry.

Chitosan-based hemostatic sponges as new generation hemostatic materials for uncontrolled bleeding emergency: Modification, composition, and applications

The choice of hemostatic technique is a curial concern for surgery and as first-aid treatment in combat. To treat uncontrolled bleeding in complex wound environments, chitosan-based hemostatic sponges have attracted significant attention in recent years because of the excellent biocompatibility, degradability, hemostasis and antibacterial properties of chitosan and their unique sponge-like morphology for high fluid absorption rate and priority aggregation of blood cells/platelets to achieve rapid hemostasis. In this review, we provide a historical perspective on the use of chitosan hemostatic sponges as the new generation of hemostatic materials for uncontrolled bleeding emergencies in complex wounds. We summarize the modification of chitosan, review the current status of preparation protocols of chitosan sponges based on various composite systems, and highlight the recent achievements on the detailed breakdown of the existing chitosan sponges to present the relationship between their composition, physical properties, and hemostatic capacity. Finally, the future opportunities and challenges of chitosan hemostatic sponges are also proposed.

Structure-activity relationship for antibacterial chitosan carrying cationic and hydrophobic moieties

To overcome the problem of antibiotic resistance and toxicity of synthetic polymers, herein we report the synthesis of biocompatible polymers which can serve as broad spectrum antimicrobials. A regioselective synthetic method was developed to synthesize N-functionalized chitosan polymers having similar degree of substitution of cationic and hydrophobic functionality with different lipophilic chains. We obtained optimum antibacterial effect by utilizing the combination of cationic and longer lipophilic chain in the polymer, against four bacterial strains. Inhibition and killing of bacteria were more pronounced in Gram positive bacteria than in Gram negative bacteria. Growth kinetics and scanning electron microscopy imaging of the polymer treated bacterial cells confirmed the inhibition of bacterial growth, morphological changes in the structure and membrane disruption in the cells as compared to the growth control for each strain. Further investigation into the toxicity and selectivity of the polymers guided us to develop a structure-activity relationship for this class of biocompatible polymers.

Biocomposite Materials Based on Poly(3-hydroxybutyrate) and Chitosan: A Review

One of the important directions in the development of modern medical devices is the search and creation of new materials, both synthetic and natural, which can be more effective in their properties than previously used materials. Traditional materials such as metals, ceramics, and synthetic polymers used in medicine have certain drawbacks, such as insufficient biocompatibility and the emergence of an immune response from the body. Natural biopolymers have found applications in various fields of biology and medicine because they demonstrate a wide range of biological activity, biodegradability, and accessibility. This review first described the properties of the two most promising biopolymers belonging to the classes of polyhydroxyalkanoates and polysaccharides-polyhydroxybutyrate and chitosan. However, homopolymers also have some disadvantages, overcome which becomes possible by creating polymer composites. The article presents the existing methods of creating a composite of two polymers: copolymerization, electrospinning, and different ways of mixing, with a description of the properties of the resulting compositions. The development of polymer composites is a promising field of material sciences, which allows, based on the combination of existing substances, to develop of materials with significantly improved properties or to modify of the properties of each of their constituent components.

Compressed Hydrogen-Induced Synthesis of Quaternary Trimethyl Chitosan-Silver Nanoparticles with Dual Antibacterial and Antifungal Activities

Quaternary Trimethyl Chitosan (QTMC) and QTMC-Silver Nanoparticles (QTMC-AgNPs) have been synthesized, characterized, and tested as antibacterial agents against Staphylococcus aureus, Escherichia coli, and two plant fungi (Sclerotium rolfsil and Fusarium oxysporum). The as-prepared water-soluble QTMC was in situ reacted with silver nitrate in the presence of clean compressed hydrogen gas (3 bar) as a reducing agent to produce QTMC-AgNPs. UV-vis, ATR-FTIR, HR-TEM/SEM, XPS, DLS, XRD, and TGA/DTG were employed to assess the optical response, morphology/size, surface chemistry, particle size distribution, crystal nature, and thermal stability of the synthesized QTMC-AgNPs, respectively. The as-prepared QTMC-AgNPs were quasi-spherical in shape with an average particle size of 12.5 nm, as determined by ImageJ software utilizing HR-TEM images and further validated by DLS analysis. The development of crystalline nanoparticles was confirmed by the presence of distinct and consistent lattice fringes with an approximate interplanar d-spacing of 2.04 nm in QTMC-AgNPs. The QTMC-AgNPs exhibited significant antibacterial activity with a clear zone of inhibition of 30 mm and 26 mm around the disks against E. coli and S. aureus, respectively. In addition, QTMC-AgNPs showed highly efficient antifungal activity with 100% and 76.67% growth inhibition against two plant pathogens, S. rolfsii and F. oxysporum, respectively, whereas QTMC revealed no impact. Overall, QTMC-AgNPs showed a promising therapeutic potential and,thus, can be considered for drug design rationale.

Chitosan: Sources, Processing and Modification Techniques

Chitosan, a copolymer of glucosamine and N-acetyl glucosamine, is derived from chitin. Chitin is found in cell walls of crustaceans, fungi, insects and in some algae, microorganisms, and some invertebrate animals. Chitosan is emerging as a very important raw material for the synthesis of a wide range of products used for food, medical, pharmaceutical, health care, agriculture, industry, and environmental pollution protection. This review, in line with the focus of this special issue, provides the reader with (1) an overview on different sources of chitin, (2) advances in techniques used to extract chitin and converting it into chitosan, (3) the importance of the inherent characteristics of the chitosan from different sources that makes them suitable for specific applications and, finally, (4) briefly summarizes ways of tailoring chitosan for specific applications. The review also presents the influence of the degree of acetylation (DA) and degree of deacetylation (DDA), molecular weight (M_w) on the physicochemical and biological properties of chitosan, acid-base behavior, biodegradability, solubility, reactivity, among many other properties that determine processability and suitability for specific applications. This is intended to help guide researchers select the right chitosan raw material for their specific applications.

Montmorillonite-Famotidine/Chitosan Bio-nanocomposite Hydrogels as a Mucoadhesive/Gastroretentive Drug Delivery System

The main purpose of the present study was to fabricate mucoadhesive bio-nanocomposite hydrogels to prolong the drug retention time in the stomach. In these bio-nanocomposite hydrogels, chitosan (CH) was used as a bioadhesive matrix, montmorillonite (MMT) was applied to modulate the release rate, and tripolyphosphate (TPP) was the cross-linking agent. The test samples were analyzed via different methods such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Drug incorporation efficacy and mucoadhesive strength of these nanocomposite hydrogel beads were studied. Swelling and in vitro drug release behaviors of these bio-nanocomposite hydrogels were evaluated in simulated gastric fluid (SGF; pH 1.2). The optimized MMT-famotidine (FMT)/CH bio-nanocomposite hydrogels displayed a controllable and sustainable drug release profile with suitable mucoadhesion and prolonged retention time in the stomach. Thus, the results demonstrated that the fabricated mucoadhesive bio-nanocomposite hydrogels could remarkably increase the therapeutic efficacy and bioavailability of FMT by the oral route.

Past and Current Progress in the Development of Antiviral/Antimicrobial Polymer Coating towards COVID-19 Prevention: A Review

The astonishing outbreak of SARS-CoV-2 coronavirus, known as COVID-19, has attracted numerous research interests, particularly regarding fabricating antimicrobial surface coatings. This initiative is aimed at overcoming and minimizing viral and bacterial transmission to the human. When contaminated droplets from an infected individual land onto common surfaces, SARS-CoV-2 coronavirus is able to survive on various surfaces for up to 9 days. Thus, the possibility of virus transmission increases after touching or being in contact with contaminated surfaces. Herein, we aim to provide overviews of various types of antiviral and antimicrobial coating agents, such as antimicrobial polymer-based coating, metal-based coating, functional nanomaterial, and nanocomposite-based coating. The action mode for each type of antimicrobial agent against pathogens is elaborated. In addition, surface properties of the designed antiviral and antimicrobial polymer coating with their influencing factors are discussed in this review. This paper also exhibits several techniques on surface modification to improve surface properties. Various developed research on the development of antiviral/antimicrobial polymer coating to curb the COVID-19 pandemic are also presented in this review.

Antimicrobial Properties of Chitosan and Chitosan Derivatives in the Treatment of Enteric Infections

Antibiotics played an important role in controlling the development of enteric infection. However, the emergence of antibiotic resistance and gut dysbiosis led to a growing interest in the use of natural antimicrobial agents as alternatives for therapy and disinfection. Chitosan is a nontoxic natural antimicrobial polymer and is approved by GRAS (Generally Recognized as Safe by the United States Food and Drug Administration). Chitosan and chitosan derivatives can kill microbes by neutralizing negative charges on the microbial surface. Besides, chemical modifications give chitosan derivatives better water solubility and antimicrobial property. This review gives an overview of the preparation of chitosan, its derivatives, and the conjugates with other polymers and nanoparticles with better antimicrobial properties, explains the direct and indirect mechanisms of action of chitosan, and summarizes current treatment for enteric infections as well as the role of chitosan and chitosan derivatives in the antimicrobial agents in enteric infections. Finally, we suggested future directions for further research to improve the treatment of enteric infections and to develop more useful chitosan derivatives and conjugates.

Self-Assembly of Soluble Chitosan Derivatives Nanoparticles for Vaccine: Synthesis, Characterization and Evaluation

Herein, a novel chitosan derivative nanoparticle was proposed to function as a delivery carrier. First of all, an improvement was made to the way N-2-hydroxypropyl trimcthyl ammonium chloride chitosan (N-2-HACC) was synthesized. Moreover, the solution to one-step synthesis of N-2-HACC from chitosan (CS) was developed. Different from the previous report, the synthesis process was simplified, and there was a reduction in the amount of 2,3-epoxypropyl trimethyl ammonium chloride (EPTAC) used. With its excellent water solubility maintained, the relatively low degree of substitution was controlled to facilitate the cross-linking reaction. The results obtained from 1H-NMR, FTIR spectroscopy, and XRD indicated a smooth EPTAC onto CS for the formation of N-2-HACC with 59.33% the degree of substitution (DS). According to our results, N-2-HACC could be dissolved in various organic solvents, deionized water, 1% acetic acid aqueous solution, and others at room temperature. Finally, a novel chitosan nanoparticle material was prepared using the self-assembly method with β-glycerophosphate sodium (β-GC), with excellent immune properties achieved, thus providing a new strategy for chitosan self-assembled nanoparticles.

Preparation and in vitro and in vivo Evaluation Of Panax Notoginseng Saponins-loaded Nanoparticles Coated with Trimethyl Chitosan Derivatives

In this study, novel Panax notoginseng saponins (PNS)-loaded nanoparticles coated with the Trimethyl chitosan (TMC) derivatives TMC-VB₁₂ and TMC-Cys (PPTT-NPs) were developed to improve the oral absorption of the constituents. PPTT-NPs were prepared by the double emulsion method and showed different encapsulation effects on the major components, including Rg1, Rb1, and R1, in PNS. In vivo, the absorption rate constant and apparent absorption coefficient of PPTT-NPs were higher than PNS solution. These findings preliminarily proved that PPTT-NPs can promote intestinal absorption to a certain extent. The pharmacokinetic results indicated that the blood concentration and the area under the curve of Rg1 and Rb1 in the PPTT-NPs were higher than Xueshuantong capsules. The cell viability of PPTT-NPs was above 90% within 25-150 μg/mL. PPTT-NPs promoted the cellular uptake of PNS by receptor-mediated endocytosis. In summary, NPs coated with TMC-VB₁₂ and TMC-Cys can be used as promising drug delivery systems.

Quaternary ammonium N,N,N-trimethyl chitosan derivative and povidone‑iodine complex as a potent antiseptic with enhanced wound healing property

The importance of developing more potent antimicrobials and robust infection prevention practices has been highlighted recently with the increase in reports of emerging bacterial resistance mechanisms and the development of antibiotic-resistant microbes. In this study, a quaternary ammonium chitosan derivative, N,N,N-trimethyl chitosan chloride (TMC) with inherent bactericidal property was synthesized and complexed with povidone‑iodine (PVP-I) to create a potentially more potent antiseptic solution that could also significantly enhance the wound healing process. TMC, a positively charged, water-soluble derivative of chitosan, formed stable solutions with PVP-I at 5% w/v TMC concentration (TMC5/PVP-I). TMC5/PVP-I was significantly effective against multidrug-resistant bacteria S. aureus compared with PVP-I alone. TMC/PVP-I solutions also showed fungicidal property against C. albicans, with no cytotoxic effects when tested against human fibroblast cells cultured in vitro. Wound healing assessment in vivo revealed early collagen formation and re-epithelialization for TMC5/PVP-I treated wounds in rats relative to control and PVP-I only. Formulation of TMC/PVP-I solutions presented in the study can be easily adapted in the existing production of commercial PVP-I creating a new product with more potent bactericidal and enhanced wound healing properties for optimal wound care.

Does polysaccharide quaternization improve biological activity?

The natural polysaccharides, due to their structural diversity, commonly present very distinct solubility and physical chemical properties and additionally have intrinsic biological activities that, gene-rally, reveal themselves in a light way. The chemical modification of the molecular structure can improve these parameters. In this review, original articles that approached the quaternization of polysaccharides for purposes of biological application were selected, without limitation of year of publication, in the databases Scopus, Web of Science and PubMed. The results obtained from the bibliographic survey indicate that the increase in positive charges caused by quaternization improves the interaction between modified polysaccharides and structures that have negative charges on their surface, such as the cell wall of microorganisms and some cells in the human body, such as the DNA. This greater interaction is reflected as an increase in the biological activity of all polysaccharides broached in this study. Another important data obtained was the fact that the chemical changes did not affect or irrelevantly affect the toxicity of almost all of the polysaccharides that were quaternized. Therefore, polysaccharide quaternization is a safe and effective way to obtain improvements in the biological behavior of these macromolecules.

Use of combined nanocarrier system based on chitosan nanoparticles and phospholipids complex for improved delivery of ferulic acid

A novel nanocarrier system of phospholipids complex loaded chitosan nanoparticles (FAPLC CNPs) was developed to improve the oral bioavailability and antioxidant potential of FA. FAPLC CNPs were optimized using a Box-Behnken Design (BBD). FAPLC CNPs were characterized using differential scanning calorimetry, Fourier transforms infrared spectroscopy, powder x-ray diffractometry, proton nuclear magnetic resonance, solubility, in vitro dissolution, ex vivo permeation, and in vivo antioxidant activity in carbon tetrachloride (CCl₄)-induced albino rat model. The characterization studies indicated a formation of the complex as well as FAPLC CNPs. The FAPLC CNPs exhibited a lower particle size ~123.27 nm, PDI value ~0.31, and positive zeta potential ~32 mV respectively. Functional characterization studies revealed a significant improvement in the aqueous solubility, dissolution, and permeation rate of FAPLC and FAPLC CNPs compared to FA and FA CNPs. The FAPLC CNPs showed significant enhancement of in vivo antioxidant activity of FA by restoring the elevated marker enzymes in the CCl₄-intoxicated rat model compared to FA CNPs. Moreover, the pharmacokinetic analysis demonstrated a significant enhancement of oral bioavailability of FA from FAPLC CNPs compared to FA CNPs. These findings show that FAPLC CNPs could be used as an effective nanocarrier for improving the oral delivery of FA.

An Overview of Current Knowledge on the Properties, Synthesis and Applications of Quaternary Chitosan Derivatives

Chitosan, a chitin-derivative polysaccharide, known for its non-toxicity, biocompatibility and biodegradability, presents limited applications due to its low solubility in neutral or basic pH medium. Quaternization stands out as an alternative to modify this natural polymer, aiming to improve its solubility over a wide pH range and, consequently, expand its range of applications. Quaternization occurs by introducing a quaternary ammonium moiety onto or outside the chitosan backbone, via chemical reactions with primary amino and hydroxyl groups, under vast experimental conditions. The oldest and most common forms of quaternized chitosan involve N,N,N-trimethyl chitosan (TMC) and N-[(2-hydroxy-3-trimethyl ammonium) propyl] chitosan (HTCC) and, more recently, quaternized chitosan by insertion of pyridinium or phosphonium salts. By modifying chitosan through the insertion of a quaternary moiety, permanent cationic charges on the polysaccharide backbone are achieved and properties such as water solubility, antimicrobial activity, mucoadhesiveness and permeability are significantly improved, enabling the application mainly in the biomedical and pharmaceutical areas. In this review, the main quaternized chitosan compounds are addressed in terms of their structure, properties, synthesis routes and applications. In addition, other less explored compounds are also presented, involving the main findings and future prospects regarding the field of quaternized chitosans.

Poly (ethylene glycol)-block-poly (D, L-lactide) (PEG-PLA) micelles for brain delivery of baicalein through nasal route for potential treatment of neurodegenerative diseases due to oxidative stress and inflammation: An in vitro and in vivo study

The application of baicalein (BE) in central nervous system (CNS) neurodegenerative diseases is hampered by its poor solubility and low oral bioavailability despite its neuroprotective effects. In this study, BE was encapsulated into poly (ethylene glycol)-block-poly (D, L-lactide) micelles (BE-MC) and administrated through nasal inhalation to enhance its brain distribution. BE-MC showed comparable in-vitro antioxidant activity to BE solution. Cytotoxicity study illustrated BE-MC could reduce BE's toxicity in SH-SY5Y cells and BV-2 cells. BE solution at concentration higher than 5 µM caused significant BV-2 cells' death after stimulation of LPS while BE-MC were non-toxic to cells at concentrations up to 50 µM. BE solution at 5 µM had no anti-inflammatory effects in BV-2 cells while BE-MC could reduce the inflammatory factor TNF-α at 5 µM and IL-6 at 20 µM significantly. Pharmacokinetic studies in C57BL/6 mice showed the absolute AUC values of BE in plasma and brain of BE-MC through nasal inhalation group were 5.09-fold and 1.50-fold higher than that of BE coarse powder through oral administration group at the same dose. Thus, our study indicated BE-MC administered nasally could be useful for treatment of CNS neurodegenerative diseases due to oxidative stress and inflammation.

Mannose-anchored N,N,N-trimethyl chitosan nanoparticles for pulmonary administration of etofylline

Drug delivery to lungs via pulmonary administration offers potential for the development of new drug delivery systems. Here we fabricated the etofylline (ETO) encapsulated mannose-anchored N,N,N-trimethyl chitosan nanoparticles (Mn-TMC NPs). The prominent characteristics like biocompatibility, controlled release, targeted delivery, high penetrability, enhanced physical stability, and scalability mark Mn-TMC NPs as a viable alternative to various nanoplatform technologies for effective drug delivery. Mannosylation of TMC NPs leads to the evolution of new drug delivery vehicle with gratifying characteristics, and potential benefits in efficient drug therapy. It is widely accepted that following pulmonary administration, the introduction of mannose to the surface of drug nanocarriers provide selective macrophage targeting via receptor-mediated endocytosis. The fabricated Mn-TMC NPs exhibited particle size of 223.3 nm, PDI 0.490, and ζ-potential -19.1 mV, drug-loading capacity 76.26 ± 1.2%, and encapsulation efficiency of 91.75 ± 0.88%. Sustained drug release, biodegradation studies, stability, safety, and aerodynamic behavior revealed the effectiveness of prepared nanoformulation for pulmonary administration. In addition, the in vivo pharmacokinetic studies in Wistar rat model revealed a significant improvement in therapeutic efficacy of ETO, illustrating mannosylation a promising approach for efficient therapy of airway diseases following pulmonary administration.

Comparison of Different Chitosan Lipid Nanoparticles for Improved Ophthalmic Tetrandrine Delivery: Formulation, Characterization, Pharmacokinetic and Molecular Dynamics Simulation

In this study, three different chitosan, namely carboxymethyl chitosan (CMC), hydroxypropyl chitosan (HPC) and trimethyl chitosan (TMC) were used as cationic materials to prepare tetrandrine lipid nanoparticles (TET-LNPs) for the treatment of glaucoma. In vitro drug release and pre-corneal retention were used to select the optimal chitosan. In vitro drug release curves of three kinds of LNPs showed a sustained release and TMC-TET-LNPs were the slowest. Moreover, compared with CMC-TET-LNPs and HPC-TET-LNPs, TMC-TET-LNPs had longer corneal retention time. Afterwards, the characteristics of TMC-TET-LNPs were investigated. The ocular irritation study revealed no sign of irritation in rabbit eyes. The pharmacokinetic studies showed that the area under the curve of TMC-TET-LNPs was increased by 2.03 times than TET solution (p < 0.01). Furthermore, the drug biofilm interactions were evaluated by molecular dynamics (MD) simulation. In MD simulation, the strong hydrophobic group of TET interacted with the tail of POPC, making it hard to enter the hydrophobic region of the membrane, thereby restricting TET ocular bioavailability. The experiments and MD simulation indicated that TMC-TET-LNPs had great potential for ocular administration and MD simulation could predict transmembrane transport of drugs.

Chitosan-coated PLGA nanoparticles for the nasal delivery of ropinirole hydrochloride: In vitro and ex vivo evaluation of efficacy and safety

Nose-to-brain delivery is an attractive route for direct drug delivery to the central nervous system (CNS), avoiding hepatic first-pass metabolism and solving blood-brain barrier passage issues. Therefore, the aim of the present study was the development of PLGA and PLGA/chitosan (chit) nanoparticles (NPs) with mucoadhesive properties, able to encapsulate ropinirole hydrochloride (RH), an anti-Parkinsonian dopaminergic agonist, and suitable to promote RH delivery across the nasal mucosa. NPs produced by nanoprecipitation showed spherical shape and a mean average size of 98.8 nm and 468.0 nm (PLGA and PLGA/chit, respectively). RH loaded PLGA/chit NPs showed a complete release of the drug in simulated nasal electrolyte solution (SNES) over the period of 24 h and increased the permeation of RH through sheep nasal mucosa by 3.22-fold in comparison to PLGA NPs. None of RH loaded NPs induced hemolysis in whole blood or the production of reactive oxygen species (ROS) in Raw 264.7 cells. On their turn, PLGA/chit NPs decreased cell viability of Raw 264.7 cells and Peripheral Blood Mononuclear Cells (PBMCs) in a concentration-dependent manner. These results revealed that, particularly PLGA/chit NPs, could be a valuable carrier for the delivery of RH to the CNS, opening a new path for Parkinson's disease therapy.

Greener approach for synthesis of N,N,N-trimethyl chitosan (TMC) using ternary deep eutectic solvents (TDESs)

N,N,N-trimethyl chitosan (TMC), quaternized hydrophilic derivative of chitosan, has been projected to have wide applications in the pharmaceutical industry owing to its improved solubility at physiological conditions. However, the conventional synthesis of TMC involves toxic organic agents, which complicates its use for biological applications. Moreover, these reactions result into unwanted O-methylation and scission of the parent polymer. In the present study we have addressed these limitations by employing a green approach to synthesize TMC, by using lipase as the biocatalyst and dimethyl carbonate (DMC) as the green methylating agent, in a reaction medium comprising of ternary deep eutectic solvents (TDESs). Synthesis of TMC was carried out by using two different lipases from Burkholderia cepacia and Candida rugosa. The resulting TMC was characterized by using FTIR, ¹H NMR, DSC, XRD. Methylation was confirmed by FTIR analysis (-CH at 1666 cm^-1) and ¹H NMR (?? = 3.3 ppm). DSC study revealed a lower thermal stability of TMC as compared to chitosan. These results indicated the possibility of using DMC as a green methylating agent, along with TDESs as green and sustainable solvents, for lipase catalyzed reactions. TMC was successfully synthesized and exhibited a degree of quaternization of about 12.5%, 15.69%, when synthesized used lipases from Burkholderia cepacia and Candida rugosa, respectively.

Trimethyl chitosan nanoparticles for ocular baicalein delivery: Preparation, optimization, in vitro evaluation, in vivo pharmacokinetic study and molecular dynamics simulation

To improve ocular bioavailability of baicalein (BAI), trimethyl chitosan coated lipid nanoparticles of baicalein (TMC-BAI-LNPs) were prepared, optimized and characterized. The properties of TMC-BAI-LNPs such as morphology, particle size, zeta potential and fourier transform infrared spectroscopy were investigated. Additionally, molecular dynamics simulation was applied as a new method to evaluate drug-biological membrane interactions. Transmission electron microscopy showed that the LNPs were approximately spherical in shape with a smooth surface. TMC-BAI-LNPs had a particle size of 162.8 nm, a positive surface charge with a zeta potential of 26.6 mV. The entrapment efficiency and drug loading values of BAI in the formulation were 90.65% and 2.04%, respectively. Moreover, in vitro drug release revealed that TMC-BAI-LNPs had a sustained release effect. In vivo studies indicated TMC-BAI-LNPs had no ocular irritation and the AUC of TMC-BAI-LNPs was 3.17-fold than that of the control (p < 0.01). Molecular dynamics simulation data showed that BAI had a poor membrane permeability, which limited the ocular bioavailability. The results indicated that TMC-BAI-LNPs might open up a new avenue for ocular administration. Furthermore, molecular dynamics simulation could predict permeability of drugs.

Chitosan Derivatives and Their Application in Biomedicine

Chitosan is a product of the deacetylation of chitin, which is widely found in nature. Chitosan is insoluble in water and most organic solvents, which seriously limits both its application scope and applicable fields. However, chitosan contains active functional groups that are liable to chemical reactions; thus, chitosan derivatives can be obtained through the chemical modification of chitosan. The modification of chitosan has been an important aspect of chitosan research, showing a better solubility, pH-sensitive targeting, an increased number of delivery systems, etc. This review summarizes the modification of chitosan by acylation, carboxylation, alkylation, and quaternization in order to improve the water solubility, pH sensitivity, and the targeting of chitosan derivatives. The applications of chitosan derivatives in the antibacterial, sustained slowly release, targeting, and delivery system fields are also described. Chitosan derivatives will have a large impact and show potential in biomedicine for the development of drugs in future.

Bordetella pertussis antigens encapsulated into N-trimethyl chitosan nanoparticulate systems as a novel intranasal pertussis vaccine

The mucosal immune system serves as the first line of defense against Bordetella pertussis. Intranasal vaccination, due to its potential to induce systemic and mucosal immune responses, appears to prevent the initial adherence and colonization of the bacteria at the first point of contact. In the present study, two B. pertussis antigens, pertussis Toxoid (PTd) and Filamentous hemagglutinin (FHA), which play a very significant role in virulence and protection against pertussis, were encapsulate into N-trimethyl chitosan (TMC) nanoparticulate systems. After preparation of TMC nanoparticles (NPs), the NPs were characterized and their ability to induce efficient immune responses against B. pertussis was studied in a mouse model. Our findings showed that PTd + FHA-loaded TMC NPs have strong ability to induce IL-4, IL-17, IFN-γ, IgG, and IgA in the mouse model. Results from this study suggest that nasal administration of the PTd + FHA-loaded TMC NPs induced not only a systemic immune response but also a local mucosal response, which may improve the efficacy of pertussis prevention through respiratory tract transmission.

Intranasal delivery of mucoadhesive nanocarriers: a viable option for Parkinson's disease treatment?

Introduction: Intranasal drug delivery is a largely unexplored, promising approach for the treatment of various neurological disorders. However, due to the challenging constraints available in the pathway of nose-to-brain delivery, finding an effective treatment for Parkinsonism is still an impending mission for research workers. This warrants development of novel treatment alternatives for Parkinson's disease (PD). Intranasal delivery of mucoadhesive nanocarriers is one such novel approach which might help in curbing the glitches associated with the currently available therapy.Areas covered: This review summarizes the evidences supporting nose-to-brain delivery of polymer-based mucoadhesive nanocarriers for the treatment of PD. A concise insight into the lipid-based mucoadhesive nanocarriers has also been presented. The recent researches have been compiled pertaining to the use of mucoadhesive nanocarrriers for improving the treatment outcomes of PD via intranasal drug delivery.Expert opinion: Although the use of nanocarrier-based strategies for site-specific delivery via intranasal route has proven effective, the magnitude of improvement remains moderate resulting in limited translation from industry to the market. Comprehensive understanding of the mucoadhesive polymer, its characteristics and mechanisms involved for an effective nose-to-brain uptake of the drug is a promising avenue to develop novel formulations for effective management of Parkinson disease.

Chitosan-based (Nano)materials for Novel Biomedical Applications

Chitosan-based nanomaterials have attracted significant attention in the biomedical field because of their unique biodegradable, biocompatible, non-toxic, and antimicrobial nature. Multiple perspectives of the proposed antibacterial effect and mode of action of chitosan-based nanomaterials are reviewed. Chitosan is presented as an ideal biomaterial for antimicrobial wound dressings that can either be fabricated alone in its native form or upgraded and incorporated with antibiotics, metallic antimicrobial particles, natural compounds and extracts in order to increase the antimicrobial effect. Since chitosan and its derivatives can enhance drug permeability across the blood-brain barrier, they can be also used as effective brain drug delivery carriers. Some of the recent chitosan formulations for brain uptake of various drugs are presented. The use of chitosan and its derivatives in other biomedical applications is also briefly discussed.

68Ga-radiolabeled bombesin-conjugated to trimethyl chitosan-coated superparamagnetic nanoparticles for molecular imaging: preparation, characterization and biological evaluation

INTRODUCTION

Nowadays, nanoparticles (NPs) have attracted much attention in biomedical imaging due to their unique magnetic and optical characteristics. Superparamagnetic iron oxide nanoparticles (SPIONs) are the prosperous group of NPs with the capability to apply as magnetic resonance imaging (MRI) contrast agents. Radiolabeling of targeted SPIONs with positron emitters can develop dual positron emission tomography (PET)/MRI agents to achieve better diagnosis of clinical conditions.

METHODS

In this work, N,N,N-trimethyl chitosan (TMC)-coated magnetic nanoparticles (MNPs) conjugated to S-2-(4-isothiocyanatobenzyl)-1,4,7,10-tetraazacyclododecane tetraacetic acid (DOTA) as a radioisotope chelator and bombesin (BN) as a targeting peptide (DOTA-BN-TMC-MNPs) were prepared and validated using fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and powder X-ray diffraction (PXRD) tests. Final NPs were radiolabeled with gallium-68 (68Ga) and evaluated in vitro and in vivo as a potential PET/MRI probe for breast cancer (BC) detection.

RESULTS

The DOTA-BN-TMC-MNPs with a particle size between 20 and 30 nm were efficiently labeled with 68Ga (radiochemical purity higher than 98% using thin layer chromatography (TLC)). The radiolabeled NPs showed insignificant toxicity (>74% cell viability) and high affinity (IC50=8.79 µg/mL) for the gastrin-releasing peptide (GRP)-avid BC T-47D cells using competitive binding assay against 99mTc-hydrazinonicotinamide (HYNIC)-gamma-aminobutyric acid (GABA)-BN (7-14). PET and MRI showed visible uptake of NPs by T-47D tumors in xenograft mouse models.

CONCLUSION

68Ga-DOTA-BN-TMC-MNPs could be a potential diagnostic probe to detect BC using PET/MRI technique.

Synthesis of N,N-Diethyl, N-Methyl Chitosan Chloride with Certain Quaternization Degree and Molecular Spectroscopic and Thermo-Morphological Study of the Alkylation

The quartenizeid chloride derivative of natural polyaminosaccharide chitosan was synthesized in two stages with acetate aldehyde and methyl iodide chemical reaction and ion replacement, which could be soluble in the water and wide pH ranges. The synthesis of the homopolymer was initially carried out with acetate aldehyde in Schiff reaction, and reduction was held on with the presence of NaBH4. The quaternization was accomplished in the acetonitrile medium with methyl iodine by continuous exposure of N2.7-8% quartenized N,N-diethyl, N-methyl chitosan iodine were synthesized with 89-91% yield, obtained by deprotonation of amine groups, with reaction of CH3J and N,N-diethyl chitosan. The ion exchange was carried out at 10% NaCl solution during 24 hours and N,N-diethyl, N-methyl chitosan chloride was obtained. Synthesis was performed with simpler and chemically effective methods compared to previous studies. The structure of product was characterized by FT-IR, UV-Vis, NMR, SEM, TGA, DTA and elemental analysis was determined. Functional changes in the structure of macromolecules were monitored with NMR and UV-Vis, and it was proved that, the main intermediate product was composed to be N,N-diethyl carbocation carrying >C=N-chromophore group. The increasing percent of carbon in content while alkylation is depeering and the presence of halogenated ions (Cl-or J-) after quaternization were observed. It has been determined that, the solubility of N,N-diethyl,N-methyl chitosan chloride or iodide in water and in pH =1-10 increased frequently. Key words. Chitosan; alkylation; diethylmethyl chitosan iodine; quartenization; UV-Vis; NMR

N,N,N‑trimethyl chitosan modified flaxseed oil based mucoadhesive neuronanoemulsions for direct nose to brain drug delivery

Here we fabricated flaxseed oil-based neuronanoemulsions (NNEs) which were further surface-modified with a mucoadhesive polymer, N,N,N‑trimethyl chitosan (TMC) to form mucoadhesive neuronanoemulsions (mNNEs). The NNEs were loaded with high partitioning ropinirole-dextran sulfate (ROPI-DS) nanoplex and fabricated using hot high-pressure homogenization (HPH) technique. NNEs were optimized using Central Composite experimental design. TMC modified mNNE have not been prepared yet for direct nose to brain drug delivery. Here, an objective to provide controlled drug release with prolonged residence on the nasal mucosa for the treatment of Parkinson's disease (PD) is at prime consideration. Enhanced brain targeting through BBB bypass drug delivery, improved therapeutic efficacy through enhanced retention of mNNE formulation over nasal mucosal membrane, reduced dose and frequency of administration, and safety were further expected outcomes of this experiment. The mNNE formulation was subjected to 6 month stability assessment. The mNNE formulation was administered to the Swiss albino mice model via intranasal route and both, the plasma and brain pharmacokinetics were estimated. The in vivo studies performed on mice exhibited high brain targeting efficiency of mNNE formulation through nose to brain delivery via olfactory pathway. The prepared intranasal mNNEs could be on the clinics, if investigated more for behavioral and neurotoxicity studies.

Residence time and uptake of porous and cationic maltodextrin-based nanoparticles in the nasal mucosa: Comparison with anionic and cationic nanoparticles

Different types of biodegradable nanoparticles (NP) have been studied as nasal mucosa cell delivery systems. These nanoparticles need to strongly interact with mucosa cells to deliver their payload. However, only a few simultaneous comparisons have been made and it is therefore difficult to determine the best candidate. Here we compared 5 types of nanoparticles with different surface charge (anionic or cationic) and various inner compositions as potential vectors: cationic and anionic liposomes, cationic and anionic PLGA (Poly Lactic co-Glycolic Acid) NP and porous and cationic maltodextrin NP (cationic surface with an anionic lipid core: NPL). We first quantified their nasal residence time after nasal administration in mice using in vivo live imaging and NPL showed the longest residence time. In vitro endocytosis on mucosal cells (airway epithelial cells, macrophages and dendritic cells) using labeled nanoparticles were performed by flow cytometry and confocal microscopy. Among the 5 nanoparticles, NPL were taken up to the greatest extent by the 3 different cell lines and the endocytosis mechanisms were characterized. Taken together, we observed that the nanoparticles' cationic surface charge is insufficient to improve mucosal residence time and cellular uptake and that the NPL are the best candidates to interact with airway mucosal cells.