Removal and separation of Cu(II) from aqueous solutions using nano-silver chitosan/polyacrylamide membranes

A review on chitosan/metal oxide nanocomposites for applications in environmental remediation

A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.

The incorporation of polypyrrole (PPy) in CS/PVA composite films to enhance the structural, optical, and the electrical conductivity

Using the solution casting method, a blend of polyvinyl alcohol/chitosan (PVA/Cs) blend was prepared with different amounts of polypyrrole (PPy) to enhance the structural and electrical conductivity of the films. The miscibility and interaction between PVA/Cs were confirmed by FT-IR measurements by shifting and disappearing some bands suggesting that the PVA functional group interacted with every other functional group on the Cs side chain. For PVA/Cs/PPy, some band intensities varied, indicating the interaction between PPy and PVA/Cs. XRD showed that the addition of PPy to the blend leads to a noticeable decrease in the intensity of the diffraction peak at 2θ = 20.0° confirming the interactions have occurred between the PVA/Cs mixture and PPy. The UV–visible spectra indicate that increasing the amounts of PPy leads to a dramatic decrease in the energy band gap and an increase in the Urbach energy due to the creation of new energy levels that emerged between conduction and valance bands. After PPy was introduced, the polaron and bipolaron transition peaks at 416, 465, and 560 nm become apparent in the PL spectrum. The dielectric and the electrical properties were reported. The values of ε′ and ε′′ were stronger at low frequencies confirming the possibilities of interface polarization processes. The tan δ behavior diagrams have exhibited one peak trend in all samples shift toward higher frequencies as the temperature and PPy rise. The presence of the peaks was explained based on the electrical conductivity mechanism and dielectric behavior. The Cole–Cole plot displays a half one semicircle shape that explains the absence of contact effects. This semicircle expands as both temperature and PPy increase.

Emerging Trends in Porogens toward Material Fabrication: Recent Progresses and Challenges

Fabrication of tailor-made materials requires meticulous planning, use of technical equipments, major components and suitable additives that influence the end application. Most of the processes of separation/transport/adsorption have environmental applications that demands a material to be with measurable porous nature, stability (mechanical, thermal) and morphology. Researchers say that a vital role is played by porogens in this regard. Porogens (i.e., synthetic, natural, mixed) and their qualitative and quantitative influence on the substrate material (polymers (bio, synthetic), ceramic, metals, etc.) and their fabrication processes are summarized. In most cases, porogens critically influence the morphology, performance, surface and cross-section, which are directly linked to material efficiency, stability, reusability potential and its applications. However, currently there are no review articles exclusively focused on the porogen pores' role in material fabrication in general. Accordingly, this article comprises a review of the literature on various types of porogens, their efficiency in different host materials (organic, inorganic, etc.), pore size distribution (macro, micro and nano), their advantages and limitations, to a certain extent, and their critical applications. These include separation, transport of pollutants, stability improvement and much more. The progress made and the remaining challenges in porogens' role in the material fabrication process need to be summarized for researcher's attention.

A novel nanofibrous PAN ultrafiltration membrane embedded with ZIF-8 nanoparticles for effective removal of Congo red, Pb(II), and Cu(II) in industrial wastewater treatment

A novel Polyacrylonitrile (PAN) composite membrane involving ZIF-8 nanoparticles, named as ZIF-8/PAN membrane, was obtained via electrospinning to remove the Congo red (CR), Pb(II) and Cu(II) ions in industrial wastewaters, during which the adsorption mechanisms were examined in this study. The adsorption efficiency of the electrospun ZIF-8/PAN membrane was as high as 89%, 92% and 76% for CR, Pb(II) and Cu(II), respectively. Comparative analysis showed that ZIF-8 nanoparticles embedded in the ZIF-8/PAN membrane accounted for these enhanced adsorption capabilities. The adsorption behaviors of the ZIF-8 nanoparticles were investigated through experiments and theoretical analysis, and the results unraveled that the adsorption for CR by the ZIF-8 was mainly including electrostatic interaction, hydrogen bonding and π-π interaction, while those for Pb(II) and Cu(II) were mainly caused by ion-exchange and chemical adsorption. Parametric studies were conducted to optimize the conditions for removing CR, Pb(II), and Cu(II) by ZIF-8 nanoparticles, during which all of pollutants showed different reactions to the solution pH. This work not only develops a novel ZIF-8/PAN composite membrane for effective removals of pollutants, but also reveals the underlying mechanisms of pollutants adsorption in terms of molecular interactions, providing important understandings on fibrous materials design for efficient heavy metals and dyes removals in industrial wastewater treatment.

Magnetic nanobiosorbent (MG-Chi/Fe3 O4 ) for dispersive solid-phase extraction of Cu(II), Pb(II), and Cd(II) followed by flame atomic absorption spectrometry determination

Trace amounts of Cu (II), Pb (II), and Cd (II) in a wastewater sample were preconcentrated with a novel cross‐linked magnetic chitosan modified with a new synthesised methionine‐glutaraldehyde Schiff's base (MG‐Chi/Fe₃O₄) as a dispersive solid‐phase extraction (DSPE) adsorbent. The adsorbed metal ions were then eluted with a specific volume of suitable solution and determined by flame atomic absorption spectrometry (FAAS). Various parameters affecting the extraction efficiency of the metal ions were investigated and optimised, including pH, amount of adsorbent, extraction time, type and volume rate of eluent, elution time, sample volume, and effect of interfering ions. The adsorption kinetics are more consistent with the pseudo‐second order model. The results were statistically interpreted and the analytical performance of the proposed method was found to have preconcentration factors of 55, 60, and 50 μg L⁻¹ for Cu(II), Pb(II), and Cd(II), respectively, limits of detection were 0.22, 0.24, and 0.10 μg L⁻¹ for Cu(II), Pb(II), and Cd(II), respectively, with a relative standard deviation (1.5%‐2.8 %), and the liner range was 5–1000 for Cu(II) and Pb(II) and 2.5–1000 for Cd(II). It was concluded that this method was suitable for successful simultaneous determination of Cu(II), Pb(II), and Cd(II) in industrial wastewater samples.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Preparation of novel chitosan polymeric nanocomposite as an efficient material for the removal of Acid Blue 25 from aqueous environment

A novel, sustainable chitosan polymeric nanocomposite (CS-PVA@CuO) was synthesized and subjected to the removal of acid blue 25 (AB25) from the aqueous environment. The influence of different variables such as p^H, contact time, initial dye concentration, temperature, and adsorption kinetics has been examined in the batch adsorption process. The CS-PVA@CuO composite was systematically characterized by XRD, FTIR, SEM, and EDX analysis. The pseudo-first order (PFO), pseudo-second order (PSO), and intra-particle diffusion kinetics equations were used to examine the kinetic data of the adsorption process. The adsorption kinetics confirms that the PSO model was a more exact fit. Thermodynamics study typically revealed that the uptake of AB25 by the adsorbent is spontaneous and endothermic in nature. Remarkably, the results reveal the highest adsorption capacity of the CS-PVA@CuO was 171.4 mg/g at 313 K. To be specific, CS-PVA@CuO polymer nanocomposite can be effectively used as a suitable adsorbent material for the potential elimination of anionic AB25 dye from the aqueous solutions.

Facile fabrication of bimetallic Fe-Mg MOF for the synthesis of xanthenes and removal of heavy metal ions

This work reported the preparation of Mg-MOF, Fe-MOF and Fe-Mg MOF by a solvothermal technique and their characterization with FT-IR, XRD, SEM, EDS, TEM and S BET analyses. The nanoparticle diameter ranged from 3.1 to 10.9 nm. The acidity of the MOFs was measured by nonaqueous potentiometric titration of n-butylamine. It was observed that the formation of a bimetallic MOF sharply increases the surface acidity and the catalytic activity. The catalytic results of the Fe-Mg MOF catalyzing the synthesis of 14-aryl-14-H-dibenzo[a,j]xanthenes in comparison with those of parent MOFs showed a higher yield of the desired product in a lower time and among various Fe : Mg, the (0.6 : 1) Fe-Mg MOF showed the highest catalytic activity and acidity. Even after the 4th run, the Fe-Mg MOF catalyst still maintained nearly the initial catalytic activity. The adsorption performance of Mg-MOF, Fe-MOF and Fe-Mg MOF was evaluated by batch experiments. The effect of contact time, the solution pH, the adsorbent dose and the initial concentration of the heavy metal ions was discussed. It was found that the capacity of the bimetallic Fe-Mg MOF for Pb(ii), Cu(ii) and Cd(ii) adsorption was higher than that of the Mg-MOF and Fe-MOF, the kinetic data followed the pseudo-second-order kinetic model and the isothermal data obeyed the Langmuir isotherm model. The mechanism of the removal of the heavy metal ions was discussed.

Low-cost sugarcane bagasse and peanut shell magnetic-composites applied in the removal of carbofuran and iprodione pesticides

In the present study, two agro-industrial wastes, sugarcane bagasse, and peanut shell were employed as support of magnetite nanoparticles for the synthesis of magnetic bio-composites: magnetic sugarcane bagasse (MB_O) and magnetic peanut shell (MPSo). The presence of magnetite was verified by Raman spectroscopy. Magnetic nanoparticles shape and size distribution were studied by TEM, while composites morphologies were observed by SEM. Structural characteristics of the pesticides and their possible chemical adsorption on composites were analyzed by FTIR. The removal was carried out by a batch adsorption process, and UV-VIS technique was used for pesticide concentration estimation. Elovich model described better all systems pointing out to a chemical adsorption process occurring. Experimental data isotherms of carbofuran and iprodione can be best explained by more than one mathematical model, but Sip was the ordinary equation in all systems. Maximum adsorption capacities of 175 and 89.3 mg/g for carbofuran, and 119 and 2.76 mg/g for iprodione, were obtained for MBo and MPSo, respectively.

Removal of Cu(II) from aqueous solutions imparted by a pectin-based film: Cytocompatibility, antimicrobial, kinetic, and equilibrium studies

To obtain pectin-based films is challenging due to the aqueous instability of polyelectrolyte mixtures. We overcome this issue by blending chitosan to pectin of high O-methoxylation degree (56%), followed by solvent evaporation. A durable film containing 74 wt% pectin content was produced and used as an adsorbent material toward Cu(II) ions. Kinetic and adsorption equilibrium studies showed that the pseudo-second-order and Sips isotherm models adjusted well to the experimental data, respectively. Langmuir isotherm indicated a maximum adsorption capacity (q_m) for Cu(II) removal of 29.20 mg g^-1. Differential scanning calorimetry, contact angle measurements, and X-ray photoelectron spectroscopy confirm the adsorption. The chemisorption plays an essential role in the process; thereby, the film reusability is low. After adsorption, the cytocompatible film/Cu(II) pair prevents the proliferation of Escherichia coli.

Pervaporative separation of water–ethanol mixtures using an Algerian Na+ montmorillonite nanoclay-incorporated poly(vinyl alcohol) nanocomposite membrane

This work aims to study the role of bentonite, Na⁺ montmorillonite (Na⁺MMT), as a filler to design a new poly(vinyl alcohol) (PVA)-based membrane for the pervaporation of an azeotropic water/ethanol mixture to enhance its separation efficiency. PVA/Na⁺MMT nanocomposite membranes, containing different ratios of Na⁺MMT (i.e., 1, 5, 10, 15, and 20 wt%), were prepared using the solvent casting method and crosslinked with maleic acid. The interactions between the PVA polymer and MMT were determined using Fourier transform infrared spectroscopy. Structural characterization by X-ray diffraction and scanning electron microscopy (SEM) analysis showed that the nanoclay structure was well-exfoliated and distributed in the crosslinked PVA matrix. To determine the thermal stability of different membranes, thermogravimetric analysis and differential scanning calorimetry were used. The mechanical properties of pure PVA and the intercalated polymer material were studied. Of note, in this study, the membranes showed a simultaneous increase in the permeation flow and selectivity depending on the montmorillonite filling charge.

This work aims to study the role of bentonite, Na⁺ montmorillonite (Na⁺MMT), as a filler to design a new poly(vinyl alcohol) (PVA)-based membrane for the pervaporation of an azeotropic water/ethanol mixture to enhance its separation efficiency.

In Situ Copolymerized Polyacrylamide Cellulose Supported Fe3O4 Magnetic Nanocomposites for Adsorptive Removal of Pb(II): Artificial Neural Network Modeling and Experimental Studies

The inimical effects associated with heavy metals are serious concerns, particularly with respect to global health-related issues, because of their non-ecological characteristics and high toxicity. Current research in this area is focused on the synthesis of poly(acrylamide) grafted Cell@Fe3O4 nanocomposites via oxidative free radical copolymerization of the acrylamide monomer and its application for the removal of Pb(II). The hybrid material was analyzed using different analytical techniques, including thermogravimetric analysis (TGA), Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis. The efficacious impact of variable parameters, including contact time, pH, material dose, initial Pb(II) concentration, and the temperature, was investigated and optimized using both batch and artificial neural networks (ANN). Surface digestion of metal ions is exceedingly pH-dependent, and higher adsorption efficiencies and adsorption capacities of Pb(II) were acquired at a pH value of 5. The acquired equilibrium data were analyzed using different isotherm models, including Langmuir, Freundlich, Temkin, and Redlich-Peterson models. In this investigation, the best performance was obtained using the Langmuir model. The maximum adsorption capacity of the material investigated via monolayer formation was determined to be 314.47 mg g-1 at 323 K, 239.74 mg g-1 at 313 K, and 100.79 mg g-1 at 303 K.

Removal of sulfamethoxazole antibiotic from aqueous solutions by silver@reduced graphene oxide nanocomposite

In the present study, the synthesizing of silver@reduced graphene oxide nanocomposite, through a facile precipitation method, is reported. In this method, in the synthesizing step, reduced graphene oxide was applied as a support, silver acetate as a precursor of Ag⁰, and sodium hydroxide as a medium for reducing procedure. Then synthesized particles were characterized by using transmission electron microscopy analysis, Fourier-transform infrared spectroscopy, field emission scanning microscopy/energy dispersive X-ray, and X-ray diffraction. Adsorbent potentials of the prepared nanocomposite were evaluated for sulfamethoxazole removal from polluted aqueous solutions via two different experimental methods, namely, "one-at-a-time" and "central composite design". The given results from the one-at-a-time method confirms that 0.007 g of silver@reduced graphene oxide nanocomposite can remove 88% (188.57 mg/g) of sulfamethoxazole from a 0.05 dm³ solution (initial concentration 30 mg/dm³) at pH = 5 after 3600 s' contact time. However, in the central composite design method, the optimum condition was 95% (79.17 mg/g) uptake of this drug from 0.05 dm³ of polluted solution with initial concentration of 30 mg/dm³ and pH = 7.5, using 0.018 g of the adsorbent in 3600 s. The main mechanism for sulfamethoxazole removal can be suggested as a suitable interaction between S atoms in functional groups in the drug and Ag atoms on the surface of nanoparticles. The pseudo-second-order patterns and Freundlich model described the empirical data isotherm and kinetics for the adsorption processes, respectively. The maximum adsorption capacity by experimental and theoretical isotherm methods (Langmuir) obtained 250 and 357 mg/g, respectively. Efficiency of the adsorbent in treatment of SMX from real samples displayed less hardness and electrical conductance samples have the maximum uptake percent while existence of nitrate ions in the solutions did not induce any negative effect on the removal of the SMX. All obtained results indicated loading of Ag nanoparticles on rGO nanosheets is an effective strategy for SMX uptake with high proficiency and shows great promise as pollutant adsorbent for environmental applications.

Preparation and characterization of poly aniline modified chitosan embedded with ZnO-Fe3O4 for Cu(II) removal from aqueous solution

Poly aniline modified chitosan embedded with ZnO/Fe₃O₄ nanocomposites were synthesized using a precipitation method and applied to the removal of Cu(II) from aqueous solution. The synthesized nanocomposite was characterized by FT-IR, XRD, FESEM, TEM, EDS, TGA, BET and zeta-potential analyses. The adsorption batch experiments were conducted as a function of five effective parameters including pH, contact time, initial concentration of copper, temperature, and adsorbent dosage using a central composite design (CCD) in response surface methodology (RSM). Contour and surface plots were used to determine the interaction effects of main factors and optimum conditions of process. The regression equation coefficients were calculated and the data confirmed the validity of second-order polynomial equation for the removal of Cu(II) with novel absorbent. Analysis of variance (ANOVA) showed a high coefficient of determination value (R²) for copper removal being 0.99. The optimum level of the pH, temperature, initial concentration of copper, adsorbent dosage and contact time for maximum Cu(II) removal (94.51%) were found to be 6.5, 31 °C, 82 mg L^-1, 0.81 g L^-1, and 51 min, respectively. It was confirmed from XPS and EDS analyses that heavy metal ions were present on the surface of nanocomposite after adsorption. The adsorption equilibrium data fitted well with the Langmuir isotherm model and the adsorption process followed the pseudo-second-order and intra-particle diffusion kinetic model. The saturated adsorption capacity is found to be 328.4 mg/g. Thermodynamics analysis suggests that the adsorption process is endothermic, with increasing entropy and spontaneous in nature. Further recycling experiments show that nanocomposite still retains 95% of the original adsorption following the 5th adsorption-desorption cycle. The effects of coexist cation ions on the adsorption of Cu(II) was also investigated under optimal condition. All the results demonstrate that nanocomposite is a potential recyclable adsorbent for hazardous metal ions in wastewater.

Performance of ceria/iron oxide nano-composites based on chitosan as an effective adsorbent for removal of Cr(VI) and Co(II) ions from aqueous systems

A novel chitosan/ceria/iron oxide (CS/ceria/Fe₃O₄) nano-composite adsorbent was synthesized for removal of Cr(VI) and Co(II) ions from aqueous systems in a batch system. The adsorbents were characterized by field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and Brunauer- Emmett-Teller (BET) analyses. The behavior of swelling kinetics was also studied. The effect of several adsorption parameters including CeO₂ and Fe₃O₄ contents, initial pH, contact time, initial Cr(VI) and Co(II) concentration, and temperature on the adsorption capacity was studied. The double exponential model revealed a better fit with the kinetic data of Cr(VI) and Co(II) ions. The Cr(VI) and Co(II) adsorption process well fitted the Langmuir model. The maximum adsorption capacities estimated from Langmuir isotherm model were 315.4 and 260.6 mg/g for Cr(VI) and Co(II) ions, respectively. Also, thermodynamic parameters were used to distinguish the nature of Cr(VI) and Co(II) adsorption. The reusability of CS/ceria/Fe₃O₄ nano-composite was evaluated with stripping agents of 0.1 M NaOH and 0.1 M HNO₃. Finally, the evaluation of Cr(VI)-Co(II) coexisting system confirmed that the presence of Co(II) ions played an inhibitor role on the Cr(VI) adsorption.

Highly efficient removal of uranium(vi) from wastewater by polyacrylic acid hydrogels

Polyacrylic acid (PAA) hydrogel prepared by radical polymerization in a clean and extremely simple way was used to adsorb U(vi) ions from aqueous solutions.

Spectroscopic Characterization of Copper-Chitosan Nanoantimicrobials Prepared by Laser Ablation Synthesis in Aqueous Solutions

Copper-chitosan (Cu-CS) nanoantimicrobials are a novel class of bioactive agents, providing enhanced and synergistic efficiency in the prevention of biocontamination in several application fields, from food packaging to biomedical. Femtosecond laser pulses were here exploited to disrupt a Cu solid target immersed into aqueous acidic solutions containing different CS concentrations. After preparation, Cu-CS colloids were obtained by tuning both Cu/CS molar ratios and laser operating conditions. As prepared Cu-CS colloids were characterized by Fourier transform infrared spectroscopy (FTIR), to study copper complexation with the biopolymer. X-ray photoelectron spectroscopy (XPS) was used to elucidate the nanomaterials' surface chemical composition and chemical speciation of the most representative elements. Transmission electron microscopy was used to characterize nanocolloids morphology. For all samples, ξ-potential measurements showed highly positive potentials, which could be correlated with the XPS information. The spectroscopic and morphological characterization herein presented outlines the characteristics of a technologically-relevant nanomaterial and provides evidence about the optimal synthesis parameters to produce almost monodisperse and properly-capped Cu nanophases, which combine in the same core-shell structure two renowned antibacterial agents.