Release properties of tannic acid from hydrogen bond driven antioxidative cellulose nanofibrous films

Water-dispersible macromolecular antioxidants for toughening and strengthening cellulose membranes

Biodegradable packaging materials from cellulose are eco-friendly alternatives to traditional petroleum-based plastics. Balancing its mechanical properties as well as protective values (antioxidation, oxygen barrier, etc.) is critical. However, most studies to improve its antioxidation performance were accompanied by sacrificed mechanical properties. In the current work, a series of linear -COOH functionalized phenolic polymers were prepared from phenolic compounds (vanillin, 3,4-dihydroxy benzaldehyde) through a facile tri-component thiol-aldehyde polycondensation. While circumventing the cumbersome protection-deprotection of phenol groups, the one-pot strategy also affords water dispersible polymers for fabricating composites with cellulose nanofibers in an aqueous medium. After introducing 5-10 wt% of the copolymers, a minor soft phase was formed inside the composites, contributing to enhanced mechanical strength, toughness, antioxidation capability, and ultra-violet blocking performance, while its oxygen barrier property was well maintained.

Pickering emulsion gel of polyunsaturated fatty acid-rich oils stabilized by zein-tannic acid green nanoparticles for storage and oxidation stability enhancement

HYPOTHESIS

Poor storage stability and oxidative deterioration are the common drawbacks of edible oils rich in polyunsaturated fatty acids (PUFAs). We hypothesized that the natural zein/tannic acid self-assembly nanoparticles (ZT NPs) could be employed as stabilizers to anchor at the oil-water interface, thus constructing Pickering emulsion gel (PKEG) system for three types of PUFA-rich oils, soybean oil (SO), fish oil (FO) and cod liver oil (CLO), to improve the storage and oxidation stability.

EXPERIMENTS

ZT NPs were prepared by the anti-solvent coprecipitation method, and the three-phase contact angle, FT-IR, and XRD were mainly characterized. To observe the shell-core structure and oil-water interface details of SO/FO/CLO PKEGs by confocal laser scanning microscope and cryo-scanning electron microscope. Accelerated oxidation of FO was performed to assess the protective effect of PKEG on lipids.

FINDINGS

The SO, FO, and CLO PKEGs stabilized by 2 % ZT NPs, with oil fraction (φ = 0.5-0.6), were obtained. PKEGs show high viscoelasticity, clear shell-core structure spatial network structure, and ideal storage stability. Under accelerated oxidation, the degree of oxidative rancidity of FO PKEG was obviously lower than that of free FO. Overall, this work opens up new possibilities for using natural PKEG to prevent oxidative deterioration and prolong the shelf-life of PUFA-rich oils.

Robust design of starch composite nanofibrous films for active food packaging: Towards improved mechanical, antioxidant, and antibacterial properties

Developing efficient and biodegradable packaging films is of paramount significance owing to the scarcity of petroleum based resources. However, their applications in food packaging are limited due to their poor mechanical properties and inadequate biological activities. This study proposes a novel approach to develop the starch composite nanofibrous films (SNFs/TA/Fe3+) consisting of starch, tannic acid, and Fe3+ using the temperature-assisted electrospinning method. The addition of TA resulted in a decrease in the rate of thermal degradation, indicating an improvement in the thermal stability of SNFs. However, the incorporation of TA or TA/Fe3+ showed only a slight impact on the internal structure of SNFs. SNFs/TA/Fe3+ loaded with 0.1 wt% of Fe3+ demonstrated a significantly higher tensile strength compared to SNFs and those loaded with TA alone. The presence of TA enhances the antioxidant activity of SNFs, and the robust SNFs/TA/Fe3+ exhibited comparable antioxidant activity to SNFs/TA. However, the SNFs/TA/Fe3+ showed a reduction in antibacterial activity, possibly due to the high valence state of the metal ions. Overall, these findings highlighted that a simple electrospinning method was used to produce SNFs/TA/Fe3+ resulted in improved mechanical properties and antioxidant activity, offering a new strategy for the development of active food packaging using SNFs.

Nanostructured chitosan-polyphenolic patch for remote NIR-photothermal controlled dermal drug delivery

We describe the synthesis of a nanostructured dermal patch composed of chitosan-tannic acid (CT) that can carry near-infrared (NIR) active Indocyanine green (ICG) dye for performing photothermal heat conversion activity. The NIR-responsive CT-I dermal patch can deliver topical antibiotic drugs (Neomycin). The CT-I and drug-loaded CT-I/N patches have been demonstrated by FTIR, SEM/EDX, TGA, and DSC analysis. The in vitro drug release from the CT-I/N patch are favorable in the dermal environment (pH = 5.5) and significantly increases 25 % more at higher temperatures of 40 to 45 °C. The CT-I/N showed increasing photothermal heat in response to NIR (808 nm) light. The in vivo thermograph demonstrated that the CT-I/N patch can generate >45 °C within 5 min NIR irradiation. As a result, sustained wound healing was shown in H&E (hematoxylin and eosin) staining dermal tissue. Such NIR-active nanostructure film/patch is promising for the future of any sustained on-demand drug delivery system.

Tannic acid: a versatile polyphenol for design of biomedical hydrogels

Tannic acid (TA), a natural polyphenol, is a hydrolysable amphiphilic tannin derivative of gallic acid with several galloyl groups in its structure. Tannic acid interacts with various organic, inorganic, hydrophilic, and hydrophobic materials such as proteins and polysaccharides via hydrogen bonding, electrostatic, coordinative bonding, and hydrophobic interactions. Tannic acid has been studied for various biomedical applications as a natural crosslinker with anti-inflammatory, antibacterial, and anticancer activities. In this review, we focus on TA-based hydrogels for biomaterials engineering to help biomaterials scientists and engineers better realize TA's potential in the design and fabrication of novel hydrogel biomaterials. The interactions of TA with various natural or synthetic compounds are deliberated, discussing parameters that affect TA-material interactions thus providing a fundamental set of criteria for utilizing TA in hydrogels for tissue healing and regeneration. The review also discusses the merits and demerits of using TA in developing hydrogels either through direct incorporation in the hydrogel formulation or indirectly via immersing the final product in a TA solution. In general, TA is a natural bioactive molecule with diverse potential for engineering biomedical hydrogels.

SF/PVP nanofiber wound dressings loaded with phlorizin: preparation, characterization, in vivo and in vitro evaluation

Electrospinning-based wound dressings have multiple functions such as antibacterial, anti-inflammatory, and therapeutic, and are important in skin wound care. Herein, we designed a phlorizin (PHL)-loaded silk protein/polyvinylpyrrolidone (SF/PVP) composite nanofibrous membrane, which can be used as multiple wound dressings. In particular, SF/PVP/PHL scaffolds have high porosity and mechanical properties, exhibiting suitable permeability and hydrophilicity. The SF/PVP/PHL scaffolds containing PHL also have excellent antibacterial and antioxidant activities. Furthermore, the nanofiber significantly accelerated the wound healing process in a full-thickness skin injury model by enhancing wound re-epithelialization and collagen deposition density, increasing the content of macrophage antigen (CD68), platelet-endothelial cell adhesion molecule (CD31), proliferating cell nuclear antigen (PCNA) and inhibiting the expression of α-smooth muscle actin (α-SMA) at the wound site. The mechanism may be related to the inhibition of activation of phosphatidylinositol 3-kinase/serine-threonine kinase/ target of rapamycin (PI3K/AKT/mTOR) signaling pathway to enhance autophagy. Therefore, SF/PVP/PHL nanofibers can ideally meet the various requirements of the wound healing process and are promising wound dressing candidates for future clinical applications.

Silk protein/polyvinylpyrrolidone nanofiber membranes loaded with puerarin accelerate wound healing in mice by reducing the inflammatory response

In modern clinical applications, wound healing remains a considerable challenge. Excessive inflammatory response is associated with delayed wound healing. In this study, we prepared composite nanofibrous membranes by mixing the Chinese herbal extract puerarin (PUE) with natural silk protein (SF) and synthetic polymer polyvinylpyrrolidone (PVP) using electrostatic spinning technique, and conducted a series of studies on the structural and biological properties of the fibrous membranes. The results showed that the loading of PUE increased the diameter, porosity and hydrophilicity of nanofibers, which were more favorable for cell adhesion and proliferation. ABTS radical scavenging assay also showed that the loading of PUE enhanced the antioxidant properties of the fibrous membranes. In addition, SF/PVP/PUE nanofibers are non-toxic and can be used as wound dressings. In vitro experiments showed that SF/PVP/PUE nanofibers could effectively alleviate lipopolysaccharide (LPS)-induced inflammation in Immortalized human keratinocytes (HaCaT) cells and down-regulate pro-inflammatory cytokine expression in cells. In vivo studies further showed that the SF/PVP/PUE nanofibers could effectively accelerate wound repair. The mechanism is that SF/PVP/PUE nanofibers can inhibit the activation and transduction of toll-like receptor 4/myeloid differentiation factor88/nuclear factor kappa B (TLR4/MyD88/NF-κB) and phosphatidylinositol 3-kinase/protein kinase B (PI3K/AKT) signaling pathways, thereby reducing the inflammatory response and achieving wound healing.

Integrating Antioxidant Functionality into Polymer Materials: Fundamentals, Strategies, and Applications

While antioxidants are widely known as natural components of healthy food and drinks or as additives to commercial polymer materials to prevent their degradation, recent years have seen increasing interest in enhancing the antioxidant functionality of newly developed polymer materials and coatings. This paper provides a critical overview and comparative analysis of multiple ways of integrating antioxidants within diverse polymer materials, including bulk films, electrospun fibers, and self-assembled coatings. Polyphenolic antioxidant moieties with varied molecular architecture are in the focus of this Review, because of their abundance, nontoxic nature, and potent antioxidant activity. Polymer materials with integrated polyphenolic functionality offer opportunities and challenges that span from the fundamentals to their applications. In addition to the traditional blending of antioxidants with polymer materials, developments in surface grafting and assembly via noncovalent interaction for controlling localization versus migration of antioxidant molecules are discussed. The versatile chemistry of polyphenolic antioxidants offers numerous possibilities for programmed inclusion of these molecules in polymer materials using not only van der Waals interactions or covalent tethering to polymers, but also via their hydrogen-bonding assembly with neutral molecules. An understanding and rational use of interactions of polyphenol moieties with surrounding molecules can enable precise control of concentration and retention versus delivery rate of antioxidants in polymer materials that are critical in food packaging, biomedical, and environmental applications.

Antibiotic-Loaded MMT/PLL-Based Coating on the Surface of Endosseous Implants to Suppress Bacterial Infections

BACKGROUND

Bone infections remain one of the most common and serious complications of orthopedic surgery, posing a tremendous economic burden to society and patients. This is because bacteria colonize and multiply on the surface of the implant. The (MMT/PLL)8 multilayer films have been shown to effectively release antibiotics depending on the changes in the microenvironment. Here, vancomycin was loaded into the (MMT/PLL)8 multilayer films, which were prepared to be used as a local delivery system for the treatment of bone infections.

METHODS

We used the layer-by-layer self-assembly method to prepare VA-loaded coatings (MMT/PLL-VA)8 consisting of montmorillonite (MMT), poly-L-lysine (PLL), and VA. The thickness and surface morphology of coatings were characterized using spectroscopic ellipsometry and scanning electron microscopy (SEM). In order to evaluate the drug release behavior from coatings in different media, we measured the size of the zone of inhibition. Additionally, in vitro antibacterial activity was assessed using the shake-flask culture method and SEM images, while that of in vivo was evaluated by establishing an animal model of bone infection.

RESULTS

Our findings revealed that small-molecule antibiotics were successfully loaded into the (MMT/PLL-VA)8 multilayer film structure during the hierarchical self-assembly process and subsequently the multilayer film structure depicted linear growth behavior. The PLL in the multilayer films was progressively degraded which triggered the VA release when contacted with CMS or bacterial infections. The release of VA from multilayer film structure depends on the concentration changes of CMS. Notably, the multilayer films presented great in vitro cell compatibility. Moreover, the prepared antibacterial multilayer films showed excellent antibacterial property by killing more than 99.99% of S. aureus in 24 h. More importantly, we found that multilayer film exhibits good sterilization effect and biocompatibility under the stimulation of bacterial liquid both in vitro and in vivo antibacterial ability tests.

CONCLUSION

Altogether, this study shows that (MMT/PLL-VA)8 multilayer films containing CMS and bacteria-responsive drug release properties posess high bactericidal activity and good biocompatibility. This finding provides a novel strategy for the treatment of bone infections.

Metal-phenolic network coated cellulose foams for solar-driven clean water production

Solar-driven water steam generation is a promising strategy for seawater desalination and wastewater purification. However, oil contaminants commonly exist in real water resources, which drives us to design and fabricate photothermal materials with high efficient water steam generation and outstanding anti-oil-fouling ability. Herein, we developed a metal-phenolic network-coated cellulose foam (Fe³⁺/TA@CF), which exhibits not only superb hydrophilicity and underwater lipophobicity, but also achieves high water evaporation rate of ∼1.3 kg m^-2 h^-1 even in oil-polluted seawater under one sun illumination. In addition, Fe³⁺/TA@CF is demonstrated to be both anti-oil-fouling and anti-salt-fouling, which benefits to long-term evaporation in practical utilizations. Metal ions and oil contaminants in the condensed water vapor are almost eliminated after purification. We believe that this low-cost, biodegradable Fe³⁺/TA@CF paves a way for rationally designing and fabricating high-performance evaporator for oil contaminated water purification.

Synthesis and characterization of biodegradable and antioxidant phosphazene-tannic acid nanospheres and their utilization as drug carrier material

In this study, hexachlorocyclotriphosphazene (HCCP) and tannic acid (TA) were used at different stoichiometric ratios to synthesize cyclomatrix-type polymeric materials with different surface features and dimensions. Using different reactive ratios, the structure and surface functional groups of the synthesized polymeric particles were explained using Fourier-Transform Infrared Spectroscopic (FTIR), Scanning Electron Microscope (SEM), Energy-dispersive X-ray spectroscopy (EDX), X-ray Photoelectron Spectroscopy (XPS) and Thermogravimetric (TG) analysis techniques. With morphologically fully spherical structure and mean 234.82 ± 49.37 nm dimensions, Phz-TA (4:1) nanospheres were researched for in vitro biodegradability, antioxidant features, and usability as a drug release system. In vitro biodegradability of Phz-TA (4:1) nanospheres was investigated at pH = 7.0 and pH = 1.2. Determined to degrade in 8-10 h at these pH values, nanospheres were used for releasing of Rhodamine 6G as a model drug. Due to the rich phenolic structure of the contained tannic acid units, nanospheres were determined to simultaneously have antioxidant features. Thus, this study determined that Phz-TA nanospheres with in vitro biodegradability and antioxidant features are promising polymeric materials for use as a potential drug-carrier in the future.

Dispersible Conjugated Polymer Nanoparticles as Biointerface Materials for Label-Free Bacteria Detection

Fast and efficient identification of bacterial pathogens in water and biological fluids is an important issue in medical, food safety, and public health concerns that requires low-cost and efficient sensing strategies. Impedimetric sensors are promising tools for monitoring bacteria detection because of their reliability and ease-of-use. We herein report a study on new biointerface-based amphiphilic poly(3-hexylthiophene)-b-poly(3-triethylene-glycol-thiophene), P3HT-b-P3TEGT, for label-free impedimetric detection of Escherichia coli (E. coli). This biointerface is fabricated by the self-assembly of P3HT-b-P3TEGT into core-shell nanoparticles, which was further decorated with mannose, leading to an easy-to-use solution-processable nanoparticle material for biosensing. The hydrophilic block P3TEGT promotes antifouling and prevents nonspecific interactions, while improving the ionic and electronic transport properties, thus enhancing the electrochemical-sensing capability in aqueous solution. Self-assembly and micelle formation of P3HT-b-P3TEGT were analyzed by 2D-NMR, Fourier transform infrared, dynamic light scattering, contact angle, and microscopy characterizations. Detection of E. coli was characterized and evaluated using electrochemical impedance spectroscopy and optical and scanning electron microscopy techniques. The sensing layer based on the mannose-functionalized P3HT-b-P3TEGT nanoparticles demonstrates targeting ability toward E. coli pili protein with a detection range from 10³ to 10⁷ cfu/mL, and its selectivity was studied with Gram(+) bacteria. Application to real samples was performed by detection of bacteria in tap and the Nile water. The approach developed here shows that water/alcohol-processable-functionalized conjugated polymer nanoparticles are suitable for use as electrode materials, which have potential application in fabrication of a low-cost, label-free impedimetric biosensor for the detection of bacteria in water.

A smart and active film with tunable drug release and color change abilities for detection and inhibition of bacterial growth

Antimicrobial resistance has become a global issue and thus the development of natural products/biomedical materials composites with antibacterial activities is urgently needed. When acute wounds develop into chronic wounds, the wound environments become alkaline. As long as infections occur, the wound pH further increases, making the wounds difficult to heal. Besides, bacterial growth in poultry, meat, fish and seafood products is usually reflected in a marked increase of pH values. Herein, smart, stimuli responsive self-assembled multilayer and complex film were constructed through the formation of hydrogen bonds and hydrophobic interactions between hydroxypropyl methylcellulose (HPMC) and epigallocatechin-3-gallate (EGCG), thereby greatly reducing the hydrophilicity of HPMC and offering enhanced mechanical strength, superior free radical scavenging capability, and improved water vapor and light barrier properties. The EGCG/HPMC complex film was able to control EGCG release by tuning pH or temperature of the release medium. Furthermore, incorporation of CuS nanoparticles into the film allowed it to triggers EGCG release in an on-demand fashion under near-infrared (NIR) exposure. Bacterial growth in glucose-free nutrient broth medium caused pH to rise (near pH 8.0), leading to transformation of EGCG from phenol type to phenolate ion and then quinone, allowing for spontaneous generation of H₂O₂ to kill bacteria. The complex films changed their color in response to bacterial growth because EGCG transformed from phenol type to quinone type under alkaline condition. The green synthesized EGCG/HPMC complex films can be used as a colorimetric pH indicator and an antibacterial material for wound dressing and food packaging applications.

Hydrogen-Bonded Films for Zero-Order Release of Leuprolide

Leuprolide has been widely used in androgen deprivation therapy for the treatment of advanced prostate cancer, but its use is still limited due to its short half-life. Herein, hydrogen-bonded layer-by-layer films are fabricated from PEGylated leuprolide (PEG-LEU) and tannic acid (TA). Because of its dynamic nature, the film disintegrates gradually in water and releases PEG-LEU and TA. The in vitro release profile indicated perfect zero-order kinetics, which is explained by the unique release mechanism. When implanted subcutaneously in male rats, the films maintain a constant serum drug level. For a 60-bilayer film, the serum drug level is maintained constant for ≈24 days. No initial burst release is observed, suggesting that the in vivo release also follows zero-order kinetics. Initially, an increase in the level of serum testosterone is induced by the released drug, followed by testosterone suppression to a constant level below the castrate level, which could be maintained as long as a constant serum drug level is maintained. Since the new drug carriers avoid an initial burst release of the drug and maintain a constant serum drug level and hence a constant serum testosterone level below the castrate level, these carriers are highly promising for androgen deprivation therapy.

Applications of Electrospun Nanofibers with Antioxidant Properties: A Review

Antioxidants can be encapsulated to enhance their solubility or bioavailability or to protect them from external factors. Electrospinning has proven to be an excellent option for applications in nanotechnology, as electrospun nanofibers can provide the necessary environment for antioxidant encapsulation. Forty-nine papers related to antioxidants loaded onto electrospun nanofibers were categorized and reviewed to identify applications and new trends. Medical and food fields were commonly proposed for the newly obtained composites. Among the polymers used as a matrix for the electrospinning process, synthetic poly (lactic acid) and polycaprolactone were the most widely used. In addition, natural compounds and extracts were identified as antioxidants that help to inhibit free radical and oxidative damage in tissues and foods. The most recurrent active compounds used were tannic acid (polyphenol), quercetin (flavonoid), curcumin (polyphenol), and vitamin B6 (pyridoxine). The incorporation of active compounds in nanofibers often improves their bioavailability, giving them increased stability, changing the mechanical properties of polymers, enhancing nanofiber biocompatibility, and offering novel properties for the required field. Although most of the polymers used were synthetic, natural polymers such as silk fibroin, chitosan, cellulose, pullulan, polyhydroxybutyrate, and zein have proven to be proper matrices for this purpose.

Production and characterization of fully biobased foamed films based on gelatin

The objective of this study was to produce and characterize gelatin foamed films using extrusion. Three “optimum” formulations containing tannic acid, nanoclays (Cloisite Na+), glycerol, water, and gelatin, as well as three “controls” without tannic acid and nanoclays were prepared by calendering. Furthermore, the three “optimum” formulations were produced by extrusion film blowing only, since no stable processing conditions could be obtained for the controls. A complete set of sample characterization was performed, including morphological, mechanical, physical, and thermal properties. The results showed that besides the processing method, the thickness was also controlled by the glycerol and water content, leading to density slightly above unity, with higher values for the optimum materials. The calendered films from the optimum formulations showed overall a higher number of cells and cell density than the controls. Higher elastic moduli and tensile strengths were obtained for the films from the optimum formulations made by either method because of the reinforcing effect of the tannic acid and nanoclays, but this led to lower strain at break. The thermal profiles were similar for all films, with higher stability for the optimum formulations. The results were also explained via chemical interactions between the components as observed by Fourier transform infrared spectroscopy. Overall, the optimum formulations not only produced better foamed films in terms of general properties but were much easier to process by both methods (calendering and blowing).

Tannic acid-based nanogel as an efficient anti-inflammatory agent

Biologically produced reactive oxygen species (ROS) are important signaling molecules in the human body. Despite their importance under normal conditions, abnormal overproduction of ROS under unbalanced or irregular homeostasis can cause severe inflammatory diseases. Various antioxidants have been developed in the biomedical field to resolve high levels of ROS; however, high doses of natural antioxidants such as polyphenol can induce side effects on health. Further, synthetic antioxidants are still controversial in regards to their safety and their complicated synthesis. Inspired from our previous work, a nitric oxide-scavenging nanogel designed for treating rheumatoid arthritis, we report herein a biocompatible tannic acid (TA)-based nanogel as an effective ROS scavenger. A polymeric phenylboronic acid-tannic acid nanogel (PTNG) was prepared by simply mixing through to the formation of phenylboronic ester bonds between polymeric phenylboronate and TA. We focused on the reaction of phenylboronic ester with H₂O₂, which readily consumes H₂O₂ molecules, and applied it as an antioxidant. In addition, TA is a well-known antioxidant, specifically a free radical scavenger; thus, we expected combinatory ROS scavenging effects for PTNG. Various ROS scavenging assays revealed the significant antioxidant effects of PTNG. Under an induced inflammation model in vitro, our PTNG showed high biocompatibility as well as strong anti-inflammatory effects. Furthermore, in the zymosan-induced peritonitis mouse model, a representative acute inflammation model in vivo, PTNG reduced significant neutrophil recruitment and pro-inflammatory cytokines, indicating successful alleviation of inflammation. On the basis of these results, we suggest that PTNG has great potential as an antioxidant and should find application in the treatment of further ROS-overproducing inflammatory diseases.

Multilayer Assembly of Tannic Acid and an Amphiphilic Copolymer Poloxamer 188 on Planar Substrates toward Multifunctional Surfaces with Discrete Microdome-Shaped Features

Tannic acid (TA) is a natural polyphenol compound with a broad spectrum of biological activities, the most notable of which being antioxidation. Poloxamer 188 (P188), a synthetic triblock copolymer of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is amphiphilic in nature and best known for its ability to seal structurally damaged cellular membranes. The integration of both substances onto planar substrates could bring a new option for multifunctional coatings that are advantageous for implantable biomedical devices. Here, we demonstrate the feasibility of multilayer assembly of TA/P188 toward such a coating based on hydrogen bonding between phenolic hydroxyls of TA and ether groups of P188, and the unique surface feature it generates. The interactions between these two compounds were studied both in solution and in substrate-supported layer-by-layer assembly. The multilayer assembly process exhibits an exponential growth pattern as characterized by UV-vis spectrophotometry and quartz crystal microbalance with dissipation. Morphologically unique, microdome-shaped surface features emerge and evolve with the number of layers assembled. Such features bring a reservoir function to this coating, as demonstrated by the loading of hydrophobic nile red dye. Furthermore, the presence of TA in the multilayers was revealed by silver nitrate staining, and its antioxidation activity was demonstrated through a 2,2-diphenyl-1-picryl-hydrazyl free-radical scavenging assay.

Polydopamine Surface Chemistry: A Decade of Discovery

Polydopamine is one of the simplest and most versatile approaches to functionalizing material surfaces, having been inspired by the adhesive nature of catechols and amines in mussel adhesive proteins. Since its first report in 2007, a decade of studies on polydopamine molecular structure, deposition conditions, and physicochemical properties have ensued. During this time, potential uses of polydopamine coatings have expanded in many unforeseen directions, seemingly only limited by the creativity of researchers seeking simple solutions to manipulating surface chemistry. In this review, we describe the current state of the art in polydopamine coating methods, describe efforts underway to uncover and tailor the complex structure and chemical properties of polydopamine, and identify emerging trends and needs in polydopamine research, including the use of dopamine analogs, nitrogen-free polyphenolic precursors, and improvement of coating mechanical properties.

Coordination-driven multilayer of phosvitin-polyphenol functional nanofibrous membranes: antioxidant and biomineralization applications for tissue engineering

The layer-by-layer (LBL) deposition technique has been widely used to decorate the nanofibers formed from polymer pairs with complementary functional groups.