Preparation and biocompatibility of a chitin nanofiber/gelatin composite film

Pentamidine-loaded gelatin decreases adhesion formation of flexor tendon

Background

Prevention of adhesion formation following flexor tendon repair is essential for restoration of normal finger function. Although many medications have been studied in the experimental setting to prevent adhesions, clinical application is limited due to the complexity of application and delivery in clinical translation.

Methods

In this study, optimal dosages of gelatin and pentamidine were validated by gelatin concentration test. Following cell viability, cell migration, live and dead cell, and cell adhesion assay of the Turkey tenocytes, a model of Turkey tendon repair was established to evaluate the effectiveness of the Pentamidine-Gelatin sheet.

Results

Pentamidine carried with gelatin, a Food and drug administration (FDA) approved material for drug delivery, showed good dynamic release, biocompatibility, and degradation. The optimal dose of pentamidine (25ug) was determined in the in vivo study using tenocyte viability, migration, and cell adhesion assays. Further biochemical analyses demonstrated that this positive effect may be due to pentamidine downregulating the Wnt signaling pathway without affecting collagen expression.

Conclusions

We tested a FDA-approved antibiotic, pentamidine, for reducing adhesion formation after flexor tendon repair in both in vitro and in vivo using a novel turkey animal model. Compared with the non-pentamidine treatment group, pentamidine treated turkeys had significantly reduced adhesions and improved digit function after six weeks of tendon healing.

The translational potential of this article

This study for the first time showed that a common clinical drug, pentamidine, has a potential for clinical application to reduce tendon adhesions and improve tendon gliding function without interfering with tendon healing.

Design of Poly(lactic) acid/gelatin core-shell bicomponent systems as a potential wound dressing material

The electrospun core-shell nanofiber has great many advantages such as different types of solvents that can be used for changing flexibility, mechanical properties, or surface chemistry of fiber. Hydrophobic Poly(lactic) acid (PLA) and hydrophilic gelatin (Gel) were electrospun by various preparation conditions to design perfect bicomponent PLA:Gel nanofiber in a core-shell structure. Solvent types, the concentration of polymeric components, flow rate, and voltage of the electrospinning process were changed to optimization of nanofiber. According to the SEM images, the best nanofiber structure without beads was obtained at 0.4 ml/h flow rate of PLA solution and 1.2 ml/h flow rate of Gel solution at 45:55 (w:w %) weight ratio of PLA:Gel in trifluoroethanol solvent with a 10 kV voltage at 10 cm distance to the collector. From the TEM images, the existence of the core-shell structure had been proved which all prepared nanofibers with 2,2,2-Trifluoroethanol solvent. Furthermore, contact angle measurements showed a change in wettability when the Gel amount was increased. Therefore, the mildest synthesis conditions were determined for bicomponent PLA:Gel core-shell nanofibers as a potential wound dressing and dual drug carrier materials.

Chitin nanofiber-coated biodegradable polymer microparticles via one-pot aqueous process

Tailoring the surface of biodegradable microparticles is important for various applications in the fields of cosmetics, biotechnology, and drug delivery. Chitin nanofibers (ChNFs) are one of the promising materials for surface tailoring owing to its functionality, such as biocompatibility and antibiotic properties. Here, we show biodegradable polymer microparticles densely coated with ChNFs. Cellulose acetate (CA) was used as the core material in this study, and ChNF coating was successfully carried out via a one-pot aqueous process. The average particle size of the ChNF-coated CA microparticles was approximately 6 μm, and the coating procedure had little effect on the size or shape of the original CA microparticles. The ChNF-coated CA microparticles comprised 0.2-0.4 wt% of the thin surface ChNF layers. Owing to the surface cationic ChNFs, the ζ-potential value of the ChNF-coated microparticles was +27.4 mV. The surface ChNF layer efficiently adsorbed anionic dye molecules, and repeatable adsorption/desorption behavior was exhibited owing to the coating stability of the surface ChNFs. The ChNF coating in this study was a facile aqueous process and was applicable to CA-based materials of various sizes and shapes. This versatility will open new possibilities for future biodegradable polymer materials that satisfy the increasing demand for sustainable development.

Photocrosslinked Fish Collagen Peptide/Chitin Nanofiber Composite Hydrogels from Marine Resources: Preparation, Mechanical Properties, and an In Vitro Study

Fish collagen peptide (FCP) is a water-soluble polymer with easy accessibility, bioactivity, and reactivity due to its solubility. The gelation of FCP can be carried out by chemical crosslinking, but the mechanical strength of FCP hydrogel is very low because of its intrinsically low molecular weight. Therefore, the mechanical properties of FCP gel should be improved for its wider application as a biomaterial. In this study, we investigated the mechanical properties of M-FCP gel in the context of understanding the influence of chitin nanofibers (CHNFs) on FCP hydrogels. FCP with a number average molecular weight (M_n) of ca. 5000 was reacted with glycidyl methacrylate (GMA) and used for the preparation of photocrosslinked hydrogels. Subsequently, composite hydrogels of methacrylate-modified FCP (M-FCP) and CHNF were prepared by the photoirradiation of a solution of M-FCP containing dispersed CHNF at an intensity of ~60 mW/cm² for 450 s in the presence of 2-hydroxy-1-[4-(hydroxyethoxy)phenyl]-2-methyl-1-propanone (Irgacure 2959) as a photoinitiator. Compression and tensile tests of the FCP hydrogels were carried out using a universal tester. The compression and tensile strength of the hydrogel increased 10-fold and 4-fold, respectively, by the addition of 0.6% CHNF (20% M-FCP), and Young's modulus increased 2.5-fold (20% M-FCP). The highest compression strength of the M-FCP/CHNF hydrogel was ~300 kPa. Cell proliferation tests using fibroblast cells revealed that the hydrogel with CHNF showed good cell compatibility. The cells showed good adhesion on the M-FCP gel with CHNF, and the growth of fibroblast cells after 7 days was higher on the M-FCP/CHNF gel than on the M-FCP gel without CHNF. In conclusion, we found that CHNF improved the mechanical properties as well as the fibroblast cell compatibility, indicating that M-FCP hydrogels reinforced with CHNF are useful as scaffolds and wound-dressing materials.

A comprehensive review on advancements in tissue engineering and microfluidics toward kidney-on-chip

This review provides a detailed literature survey on microfluidics and its road map toward kidney-on-chip technology. The whole review has been tailored with a clear description of crucial milestones in regenerative medicine, such as bioengineering, tissue engineering, microfluidics, microfluidic applications in biomedical engineering, capabilities of microfluidics in biomimetics, organ-on-chip, kidney-on-chip for disease modeling, drug toxicity, and implantable devices. This paper also presents future scope for research in the bio-microfluidics domain and biomimetics domain.

Synthesis of polyacrylonitrile/polytetrahydropyrimidine (PAN/PTHP) nanofibers with enhanced antibacterial and anti-viral activities for personal protective equipment

Emerging infectious diseases caused by the spread of bacteria and viruses are a major burden on global economic development and public health. At present, most personal protective equipment has weak antibacterial and anti-viral properties. The PAN/PTHP nanofibers reported in this article provide a new method for the development of personal protective equipment. In this study, a mixture of PTHP and PAN was prepared into PAN/PTHP nanofibers with high-efficiency and long-lasting antibacterial effects (>99.999%) through the electrospinning process. Live/dead staining and cell proliferation experiments showed that the preparation of PAN/PTHP nanofibers has good cell compatibility. In addition, PAN/PTHP nanofibers show obvious destructive effects on lentiviruses. Based on these characteristics, PAN/PTHP nanofibers were applied to facial masks, which can be used as the inflatable biocidal layer of facial masks and have an excellent interception effect on particles in the air. The successful synthesis of these fascinating materials may provide new insights for the development of new protective materials.

Bioactive Pectin-Murta (Ugni molinae T.) Seed Extract Films Reinforced with Chitin Fibers

This study investigated the biocomposite pectin films enriched with murta (Ugni molinae T.) seed polyphenolic extract and reinforced by chitin nanofiber. The structural, morphological, mechanical, barrier, colorimetric, and antioxidant activity of films were evaluated. The obtained data clearly demonstrated that the addition of murta seed extract and the high load of chitin nanofibers (50%) provided more cohesive and dense morphology of films and improved the mechanical resistance and water vapor barrier in comparison to the control pectin film. The antioxidant activity ranged between 71% and 86%, depending on the film formulation and concentration of chitin nanofibers. The presented results highlight the potential use of chitin nanofibers and murta seed extract in the pectin matrix to be applied in functional food coatings and packaging, as a sustainable solution.

Gelatin-Based Hybrid Scaffolds: Promising Wound Dressings

Wound care is a major biomedical field that is challenging due to the delayed wound healing process. Some factors are responsible for delayed wound healing such as malnutrition, poor oxygen flow, smoking, diseases (such as diabetes and cancer), microbial infections, etc. The currently used wound dressings suffer from various limitations, including poor antimicrobial activity, etc. Wound dressings that are formulated from biopolymers (e.g., cellulose, chitin, gelatin, chitosan, etc.) demonstrate interesting properties, such as good biocompatibility, non-toxicity, biodegradability, and attractive antimicrobial activity. Although biopolymer-based wound dressings display the aforementioned excellent features, they possess poor mechanical properties. Gelatin, a biopolymer has excellent biocompatibility, hemostatic property, reduced cytotoxicity, low antigenicity, and promotes cellular attachment and growth. However, it suffers from poor mechanical properties and antimicrobial activity. It is crosslinked with other polymers to enhance its mechanical properties. Furthermore, the incorporation of antimicrobial agents into gelatin-based wound dressings enhance their antimicrobial activity in vitro and in vivo. This review is focused on the development of hybrid wound dressings from a combination of gelatin and other polymers with good biological, mechanical, and physicochemical features which are appropriate for ideal wound dressings. Gelatin-based wound dressings are promising scaffolds for the treatment of infected, exuding, and bleeding wounds. This review article reports gelatin-based wound dressings which were developed between 2016 and 2021.

Eco-friendly isolation and characterization of nanochitin from different origins by microwave irradiation: Optimization using response surface methodology

The extraction of nanochitin from marine waste has attracted great industrial interest due to its unique properties, namely biodegradability, biocompatibility and as a functional reinforcing agent. Conventional acid hydrolysis isolation of nanochitin requires high temperatures and acid concentration, time and energy. Herein, for the first time, microwave irradiation method was used as an eco-friendly approach to isolate nanochitin from different sources. The isolation conditions were optimized through an experimental Box-Behnken design using surface response methodology. The data showed optimal conditions of 1 M HCl, 10.00 min and 124.75 W to obtain lobster nanocrystals; 1 M HCl, 14.34 min and 50.21 W to obtain shrimp nanocrystals; and 1 M HCl, 29.08 min and 54.08 W to obtain squid pen nanofibres, reducing time and HCl concentration. The obtained isolation yields where of 85.30, 79.92 and 80.59 % for lobster, shrimp and squid, respectively. The morphology of the nanochitins was dependent of the chitin origin, and the lengths of the nanochitins were of 314.74, 386.12 and > 900 nm for lobster, shrimp and squid pen, respectively. The thermal stability of the ensuing nanochitins was maintained after treatment. The results showed that nanochitin could be obtained by using an eco-friendly approach like microwave irradiation.

Production of natural chitin film from pupal shell of moth: Fabrication of plasmonic surfaces for SERS-based sensing applications

Commercially available types of chitin or chitin isolate are usually in powder form and are nanofibrous in microstructure. However, the surface characteristics of natural chitin in the body of insects are currently understudied. Herein, natural chitin film was successfully produced from bio-waste of insect pupae of the Japanese giant silkworm. Two different surface morphologies of the chitin film were observed. We report for the first time a micropapillary surface structure of chitin which was observed on the dorsal side of the film. To further potential of the micropapillary structured natural chitin in sensing applications, we develop a protocol for generating a nanoscopic film of Ag using thermal evaporation. The Ag-deposited natural chitin films exhibited surface-enhanced Raman scattering (SERS) activity to an extent depending on the structure of the film. In conclusion, materials science has been expanded by addition of a natural, three-dimensional chitin film with utilizable properties.

A review on native well-preserved chitin nanofibrils for materials of high mechanical performance

Novel chitin nanofibrils (ChNF) demonstrate excellent mechanical properties due to a long and extended polymer conformation. The current study highlights the importance of preserving ChNFs for stronger nanomaterials. Various chitin sources - crab, lobster, shrimp, squid pen, mushrooms, and insects have been reviewed. We have discussed preparation protocols and the physical properties of ChNF and presented the mechanical performance of nanomaterials. ChNF close to the native state uses fewer chemicals for treatment and shows a higher molar mass, degree of acetylation, crystallinity index, micrometer length, and a smaller diameter (3 nm), making them cheap, eco-friendly, and competitive to cellulose or synthetic fibrils. A highly acetylated or partially deacetylated ChNF forms a stable colloidal suspension, and it is possible to prepare from it strong films, hydrogels, aerogels, foams, polymer matrix nanocomposites, and microfibers. Moreover, it is possible to regenerate, functionalize, or cross-link the ChNFs to improve nanomaterials' mechanical performance. The preparation protocols remain the key to these achievements. However, the chemical techniques are not friendly ecologically and may hydrolytically degrade the chitin. The biological processes using enzymes or microorganisms are much better but still inefficient. Besides, the processing time limits the rapid preparation of the fibrils in the long-term perspective.

Marine-Derived Polymeric Materials and Biomimetics: An Overview

The review covers recent literature on the ocean as both a source of biotechnological tools and as a source of bio-inspired materials. The emphasis is on marine biomacromolecules namely hyaluronic acid, chitin and chitosan, peptides, collagen, enzymes, polysaccharides from algae, and secondary metabolites like mycosporines. Their specific biological, physicochemical and structural properties together with relevant applications in biocomposite materials have been included. Additionally, it refers to the marine organisms as source of inspiration for the design and development of sustainable and functional (bio)materials. Marine biological functions that mimic reef fish mucus, marine adhesives and structural colouration are explained.

Multifunctional betanin nanoliposomes-incorporated gelatin/chitosan nanofiber/ZnO nanoparticles nanocomposite film for fresh beef preservation

The objective of this study was to fabricate betanin nanoliposomes incorporated gelatin/chitosan nanofiber/ZnO nanoparticles bionanocomposite film (G/CH NF/ZnO NPs/B NLPs) and investigate its effects on the preservation of fresh beef. The scanning electron microscopy image of nanocomposite film displayed a good inter-connective porous morphology. Fourier transform infrared and X-ray diffraction analysis confirmed the formation of new hydrogen bonds and enhanced crystallinity through the addition of CH NF, ZnO NPs, and B NLPs. The G/CH NF/ZnO NPs/B NLPs film exhibited satisfactory mechanical properties and high surface hydrophobicity (water contact angle = 92.49 ± 3.71°). The incorporation of ZnO NPs and B NLPs in the nanocomposite film provided high antibacterial activity and DPPH inhibition activity (53.02 ± 3.26%). The growth of inoculated bacteria, lipid oxidation, and the changes in the pH and color quality of the beef samples were controlled by packaging with the fabricated film. In conclusion, the G/CH NF/ZnO NPs/B NLPs nanocomposite has a high potential for meat preservation.

High strength nanostructured films based on well-preserved β-chitin nanofibrils

Chitin nanofibrils (ChNF) are interesting high-value constituents for nanomaterials due to the enormous amount of waste from the seafood industry. So far, the reported ChNFs are substantially modified and chemically degraded (shortened) during extraction from the organisms. Here, highly individualized and long native-state β-chitin nanofibrils from Illex argentinus squid pens are prepared. A mild treatment was developed to preserve the molar mass, aspect ratio, degree of acetylation and crystallite structure. The fibrils show a uniform diameter of 2-7 nm, very high aspect ratio (up to 750), high degree of acetylation (DA = 99%), and high molar mass (843 500 dalton). The powder X-ray diffraction analysis showed the preserved crystallite structure after protein removal. These "high quality" ChNFs were used to prepare nanostructured films via vacuum filtration from stable hydrocolloids. The effects of well-preserved "native" fibrils on morphology, and film properties (mechanical and optical), were studied and compared with earlier results based on coarser and shorter, chemically degraded chitin fibrils.

Preparation and characterization of gelatin-based nanocomposite containing chitosan nanofiber and ZnO nanoparticles

There is an increasing interest toward biodegradable active packaging because of consumer demand and environmental concerns. Despite this interest, poor thermal, mechanical, and water barrier properties of biodegradable polymers such as gelatin limit their application in food packaging. In this study, to prevail these limitations, the gelatin-based nanocomposite containing chitosan nanofiber (CHNF) and ZnO nanoparticles (ZnONPs) were fabricated and characterized by FTIR, SEM, and DSC analyses. The results showed the appropriate interactions between gelatin matrix, CHNF and ZnONPs due to their good compatibility. Additionally, the nanocomposite showed high mechanical and water barrier properties due to its high dense and less permeable structure. The incorporation of CHNF compensated the negative effect of ZnONPs on the color properties of gelatin film. In addition, the synergistic effect between CHNF and ZnONPs improved the antibacterial activity of nanocomposite. In conclusion, the fabricated bio nanocomposite indicated considerable potential for food packaging.

Gelatin-polysaccharide composite scaffolds for 3D cell culture and tissue engineering: Towards natural therapeutics

Gelatin is a promising material as scaffold with therapeutic and regenerative characteristics due to its chemical similarities to the extracellular matrix (ECM) in the native tissues, biocompatibility, biodegradability, low antigenicity, cost-effectiveness, abundance, and accessible functional groups that allow facile chemical modifications with other biomaterials or biomolecules. Despite the advantages of gelatin, poor mechanical properties, sensitivity to enzymatic degradation, high viscosity, and reduced solubility in concentrated aqueous media have limited its applications and encouraged the development of gelatin-based composite hydrogels. The drawbacks of gelatin may be surmounted by synergistically combining it with a wide range of polysaccharides. The addition of polysaccharides to gelatin is advantageous in mimicking the ECM, which largely contains proteoglycans or glycoproteins. Moreover, gelatin-polysaccharide biomaterials benefit from mechanical resilience, high stability, low thermal expansion, improved hydrophilicity, biocompatibility, antimicrobial and anti-inflammatory properties, and wound healing potential. Here, we discuss how combining gelatin and polysaccharides provides a promising approach for developing superior therapeutic biomaterials. We review gelatin-polysaccharides scaffolds and their applications in cell culture and tissue engineering, providing an outlook for the future of this family of biomaterials as advanced natural therapeutics.

High strength gelatin-based nanocomposites reinforced by surface-deacetylated chitin nanofiber networks

In this study, chitin nanofiber (ChNF) was deacetylated on the crystalline surface by NaOH treatment, leading to the fibrillation of mostly individualized nanofibers with high aspect ratio. The small diameter and high strength of chitin nanofibers make them promising reinforcing fillers for composites. Herein by introducing into the gelatin, surface-deacetylated chitin nanofiber (S-ChNF)/gelatin nanocomposites were fabricated in different component ratios using immersion method followed with drying. Due to the reinforcing effect attributed to S-ChNF, mechanical properties of the S-ChNF/gelatin were significantly improved in both stress and Young's modulus while still maintaining high transparency regardless of nanofiber content. Morphology and Fourier-transform infrared characterization revealed that S-ChNF preserved nanonetwork structures in the gelatin matrix and exhibited good compatibility through hydrogen bonding, which further confirmed the improvement in mechanical properties. Therefore, these S-ChNF/gelatin nanocomposites based on biocompatible and biodegradable raw materials have potential applications in biomedical and food packaging industries.