Effect of modification with 1,4-α-glucan branching enzyme on the rheological properties of cassava starch

Enzymatic modification lowers syneresis in corn starch gels during freeze-thaw cycles through 1,4-α-glucan branching enzyme

The current research in the food industry regarding enzymatic modification to enhance the freeze-thaw (FT) stability of starch is limited. The present study aimed to investigate the FT stability of normal corn starch (NCS) modified using 1,4-α-glucan branching enzyme (GBE) derived from Geobacillus thermoglucosidans STB02. Comprehensive analyses, including syneresis, scanning electron microscopy, and low-field nuclear magnetic resonance, collectively demonstrated the enhanced FT stability of GBE-modified corn starch (GT-NCS-30) in comparison to its native form. Its syneresis was 66.4 % lower than that of NCS after three FT cycles. Notably, GBE treatment induced changes in the pasting properties and thermal resistance of corn starch, while simultaneously enhancing the mechanical strength of the starch gel. Moreover, X-ray diffractograms and microstructural assessments of freeze-thawed gels indicated that GBE treatment effectively hindered the association of corn starch molecules, particularly amylose retrogradation. The enhanced FT stability of GBE-modified starch can be attributed to alterations in the starch structure induced by GBE. This investigation establishes a foundation for further exploration into the influence of GBE treatment on the FT stability of starch and provides a theoretical basis for further research in this area.

Enhancing the nonlinear rheological property and digestibility of mung bean flour gels using controlled microwave treatments: Effect of starch debranching and protein denaturation

In this study, we examined the possibility of using industrial microwave processing to enhance the gelling properties and reduce the starch digestibility of mung bean flour (MBF). MBF (12.6 % moisture) was microwaved at a power of 6 W/g to different final temperatures (100-130 °C), and then its structural and functional properties were characterized. The microwave treatment had little impact on the crystalline structure or amylose content of the starch, but it roughened the starch granule surfaces and decreased the short-range ordered structure and degree of branching. In addition, the extent of mung bean protein denaturation caused by the microwave treatment depended on the final temperature. Slightly denaturing the proteins (100 °C) did not affect the nature of the gels (protein phase dispersed in a starch phase) but the gel network became more compact. Moderately denaturing the proteins (110-120 °C) led to more compact and homogeneous starch-protein double network gels. Excessive protein denaturation (130 °C) caused the gel structure to become more heterogeneous. As a result, the facilitated tangles between starch chains by more linear starch molecules after debranching, and the protein network produced by moderate protein denaturation led to the formation of stronger gel and the improvement of plasticity during large deformation (large amplitude oscillatory shear-LAOS). Starch recrystallization, lipid complexion, and protein network retard starch digestion in the MBF gels. In conclusion, an industrial microwave treatment improved the gelling and digestive properties of MBF, and Lissajous curve has good adaptability in characterizing the viscoelasticity of gels under large deformations.

Rheological properties of indica rice determined by starch structure related enzymatic activities during after-ripening

The processing quality of indica rice must undergo ripening after harvest to achieve stability and improvement. However, the mechanism underlying this process remains incompletely elucidated. Starch, the predominant component in indica rice, plays a crucial role in determining its properties. This study focused on analyzing the rheological properties and starch fine structure, as well as the related biosynthetic enzymes of indica rice during the after-ripening process. The results showed that after-ripened rice exhibited increased elastic modulus (G') and viscous modulus (G″), accompanied by a decrease in the loss tangent (Tan δ), indicating an enhancement in viscoelasticity and the gel network structure. Moreover, the proportions of amylopectin super long chains (DP 37-60) decreased, while those of medium chains (DP 13-24 and DP 25-36) or short chains (DP 6-12) of amylopectin increased. Additionally, the activities of starch branching enzyme (SBE) and starch debranching enzyme (DBE) declined over the after-ripening period. Pearson correlation analysis revealed that the rheological properties of after-ripened rice were correlated with the chain length distribution (CLD) of starch, which, in turn, was associated with its related endogenous enzymes. These findings provied new insights into understanding the quality changes of after-ripened indica rice.

Effect of different screw speeds on the structure and properties of starch straws

To illustrate the action mechanism of screw speed on the performance of starch-based straws during the extrusion process, starch-based straws at different screw speeds were prepared using a twin-screw extruder and the structures and characteristics were compared. The results indicated that as screw speeds improved from 3 Hz to 13 Hz, the A chain of amylopectin increased from 25.47 % to 28.87 %, and the B3 chain decreased from 6.34 % to 3.47 %. The absorption peak of hydroxyl group shifted from 3296 cm-1 to 3280 cm-1. The relative crystallinity reduced from 13.49 % to 9.89 % and the gelatinization enthalpy decreased from 3.5 J/g to 0.2 J/g. The performance of starch straws did not increase linearly with increasing screw speeds. The starch straw produced at screw speed of 7 Hz had the largest amylose content, the highest gelatinization temperature, the minimum bending strength, and the lowest water absorption rate in hot water (80 °C). Screw speed had a remarkable impact on the mechanical strength, toughness and hydrophobicity of starch-based straws. This study revealed the mechanism of screw speed on the mechanical strength and water resistance of starch straws in the thermoplastic extrusion process and created the theoretical basis for the industrial production of starch-based straws.

Jicama (Pachyrhizus spp.) a nonconventional starch: A review on isolation, composition, structure, properties, modifications and its application

Starch attracts food industries due to their availability in nature, cheapness, biodegradability and possibilities of endless applications. The starch properties and their modification affect food quality. Compared to other cereals, tuber and root starches, more systematic information is needed on the jicama starches (JS). This review article summarizes the isolation, composition, morphology, rheological, thermal and digestibility properties of JS. The modifications and its current and potential applications are also discussed. The chemical composition and structure of JS are different from other starches, influencing its properties. JS has been modified by physical and chemical methods to improve the properties of starch. However, there are very few studies on the modification of JS as compared with other commercial starch although it has been used in food formulation as a stabilizer and to improve the texture of food products. It is also applied as an edible coating to preserve the quality of food products and use as a raw material for making edible and bioplastic packaging. However, large-scale utilization of JS is unexplored compared to commercial starches. Therefore, this review would provide useful information and suggestions for more research on Jicama starch and its industrial applications.

Improving the thermal stability and branching efficiency of Pyrococcus horikoshii OT3 glycogen branching enzyme

In practical applications, the gelatinisation temperature of starch is high. Most current glycogen branching enzymes (GBEs, EC 2.4.1.18) exhibit optimum activity at moderate or low temperatures and quickly lose their activity at higher temperatures, limiting the application of GBEs in starch modification. Therefore, we used the PROSS strategy combined with PDBePISA analysis of the dimer interface to further improve the heat resistance of hyperthermophilic bacteria Pyrococcus horikoshii OT3 GBE. The results showed that the melting temperature of mutant T508K increased by 3.1 °C compared to wild-type (WT), and the optimum reaction temperature increased by 10 °C for all mutants except V140I. WT almost completely lost its activity after incubation at 95 °C for 60 h, while all of the combined mutants maintained >40 % of their residual activity. Further, the content of the α-1,6 glycosidic bond of corn starch modified by H415W and V140I/H415W was approximately 2.68-fold and 1.92-fold higher than that of unmodified corn starch and corn starch modified by WT, respectively. Additionally, the glucan chains of DP < 13 were significantly increased in mutant modified corn starch. This method has potential for improving the thermal stability of GBE, which can be applied in starch branching in the food industry.

Distinctions in structure, rheology, antioxidation, and α-glucosidase inhibitory activity of β-glucans from different species

To investigate the distinctions between β-glucans from different species, Lentinula edodes β-glucan (LG), yeast β-glucan (YG), and oat β-glucan (OG) were extracted with hot water and determined as β-d-glucopyranose form by HPLC and FT-IR analysis. The molecular weight (Mw) of LG, YG, and OG was 670 kDa, 341 kDa, and 66 kDa, respectively. Scanning electron microscopy exhibited different micro surfaces of three β-glucans and the relative crystallinity of YG was the highest (29.8 %), followed by that of LG (23.2 %) and OG (20.3 %) determined by X-ray diffraction. Congo red analysis and atomic force microscopy showed that LG and YG have triple helical structures. The apparent viscosity, storage modulus (G'), and loss modulus (G") of β-glucans were increased with the increase of Mw. DPPH·, ABTS+·, HO·, and reducing power assays showed that β-glucans from different species exhibited different antioxidant activities, and the DPPH· scavenging rate of 2 mg/mL LG reached >80 % higher than that of YG and OG. The α-glucosidase inhibitory activity of OG was better than YG and LG. In summary, β-glucans from different species have different structures, physicochemical properties, and physiological functions, which provides theoretical evidence for the precise processing and utilization of β-glucan.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Maltogenic amylase: Its structure, molecular modification, and effects on starch and starch-based products

Maltogenic amylase (MAA) (EC3.2.1.133), a member of the glycoside hydrolase family 13 that mainly produces α-maltose, is widely used to extend the shelf life of bread as it softens bread, improves its elasticity, and preserves its flavor without affecting dough processing. Moreover, MAA is used as an improver in flour products. Despite its antiaging properties, the hydrolytic capacity and thermal stability of MAA can't meet the requirements of industrial application. However, genetic engineering techniques used for the molecular modification of MAA can alter its functional properties to meet application-specific requirements. This review briefly introduces the structure and functions of MAA, its application in starch modification, its effects on starch-based products, and its molecular modification to provide better insights for the application of genetically modified MAA in starch modification.

Effects of different rapid cooling temperatures and annealing on functional properties of starch straws after thermoplastic extrusion

To improve the performance of starch straws in rapidly cooling and annealing procedure of thermoplastic extrusion, control straw was prepared through slowly cooling at 25 °C, and starch straw was prepared through regulating different rapid cooling temperatures including 20 °C, 5 °C, -10 °C and -20 °C. The results indicated that control straw exhibited a homogeneous state, while starch straws treated by rapid cooling displayed like a wash-board structure. Compared to control straw, the ratio of the absorption peak intensity of 1047 and 1022 cm^-1 increased from 1.050 to 1.455 as cooling temperatures decreased from 25 °C to -20 °C, indicating short-range order of the double helix structure significantly enhanced. The relative crystallinities of starch straws increased from 12.01 % to 16.58 %. The maximum bending force value (60.92 N) of starch straws cooled at -20 °C was significantly higher than that (46.14 N) of control straw. Conversely, the modulus of elasticity in bending values (4.21-16.43 N/cm) of rapid cooling-treated straws were significantly lower than that (48.42 N/cm) of control straw. Water absorption of rapid cooling-treated straws were lower than that of control straw, indicating the hydrophobicity property of starch straws significantly improved.

Structural, physicochemical and long-term retrogradation properties of wheat starch treated using transglucosidase

To reduce the wheat-flour-based food texture and flavor deterioration caused by starch retrogradation, herein wheat starch, the most ingredient in wheat flour, was modified by transglucosidase to delay long-term retrogradation of wheat starch. The study proposed promising data of transglucosidase-treated starch about structure, crystallinity and retrogradation kinetics. Structural properties showed that transglucosidase treatment shortened the average chain length from 19.49 to 16.10 and induced the dominance of amorphous state. Moreover, branching degree increased from 14.11% to 17.97% after transglucosidase treatment, resulting in higher water mobility. Amylose content increased from 25.33% to 59.00% due to the hydrolysis ability of transglucosidase. Relative crystallinity of the retrograded starches decreased from 24.33% to 14.50%. Furthermore, the Avrami parameters demonstrated that transglucosidase treatment significantly retarded the retrogradation rate of wheat starch due to the decrease of re-crystalline rate. The outcoming would supply a solid theory foundation for exploring the wheat staple foods with higher qualities.

The influence of amylose content on the modification of starches by glycogen branching enzymes

Glycogen branching enzymes (GBEs) have been used to generate new branches in starches for producing slowly digestible starches. The aim of this study was to expand the knowledge about the mode of action of these enzymes by identifying structural aspects of starchy substrates affecting the products generated by different GBEs. The structures obtained from incubating five GBEs (three from glycoside hydrolase family (GH) 13 and two from GH57) on five different substrates exhibited minor but statistically significant correlations between the amount of longer chains (degree of polymerization (DP) 9-24) of the product and both the amylose content and the degree of branching of the substrate (Pearson correlation coefficient of ≤-0.773 and ≥0.786, respectively). GH57 GBEs mainly generated large products with long branches (100-700 kDa and DP 11-16) whereas GH13 GBEs produced smaller products with shorter branches (6-150 kDa and DP 3-10).

The combined effect of thermal-acid hydrolysis, periodate oxidation, and iodine species removal on the properties of native tapioca (Manihot esculenta Crantz) starch

Through a four-step top-down approach, native tapioca starch (NTS) was thermally acid-hydrolyzed, periodate-oxidized with subsequent removal of iodine species (i.e., IO₄(-), IO₃(-), I(-), and I₂), and dialdehyde tapioca starch (DTS) alcohol-precipitation. The percent yield was ∼91%. Analyses confirmed the presence of aldehydic functionalities (∼71%), effectual iodine species removal (∼98%), and enhanced water-solubility (∼96.57%). Besides, the combined treatment significantly reduced the M_w (∼57.81 kDa) and ameliorated homogeneity as well as thermal stability (T_max ∼ 667.15 °C). Structural-spectral characterization also confirmed the presence of aldehydic functionality, polymorphic transition (C- to A-type), and a higher degree of crystallinity (∼91.77%), the latter further corroborated by thermal analysis. The morphological study revealed that the combined treatment reduced size (∼393.55-nm-diameter and ∼5.22-μm-length) and changed shape into rod-like crystals. DTS showed considerably and significantly low cytotoxicity to HaCaT cells in vitro at the concentrations assayed over the test period (24 h). DTS's conformation was most stable at -289 kcal/mol and -151.7 au heat formation and minimum potential energies, respectively. Overall, these results demonstrated that the combined treatment had no deleterious effects on NTS's properties, thus yielded DTS with ideal properties for multifarious uses.

Proximate Composition, Physicochemical, Functional, and Antioxidant Properties of Flours from Selected Cassava (Manihot esculenta Crantz) Varieties

Cassava flour has a high potential to contribute as a raw material in the food industry. This study was aimed at characterizing flours from Sri Lankan cassava varieties with a view to explore the potential in food applications. Flours prepared from five cassava varieties, namely, Kirikawadi, MU51, Swarna, Shani, and Suranimala, were analyzed for proximate composition and physicochemical, functional, and antioxidant properties using standard methods. Flours from tested cassava varieties contained <1% crude fat and <2% crude protein. Flour from MU51 contained the highest amount of HCN (48.05 mg/kg) while flour from Suranimala contained the lowest (4.85 mg/kg). Total starch and amylose contents of flours were significantly lower (p < 0.05) than those of commercial wheat flour. Flour from Suranimala contained approximately similar amylopectin content as commercial wheat flour. Water absorption capacity, oil absorption capacity, water solubility index, swelling power, emulsion activity, and emulsion stability of flours from five cassava varieties were significantly higher (p < 0.05) than those of commercial wheat flour. Swarna was identified as the richest source of phenolic compounds (4.44 mmol GAE/100 g dry weight) among the five varieties. Results showed the promising application potential of flours from these five cassava varieties in different food applications such as weaning foods, bakery foods, and edible films.

Two 1,4-α-glucan branching enzymes successively rearrange glycosidic bonds: A novel synergistic approach for reducing starch digestibility

Enzymatically rearranging α-1,4 and α-1,6 glycosidic bonds in starch is a green approach to regulating its digestibility. A two-step modification process successively catalyzed by 1,4-α-glucan branching enzymes (GBEs) from Rhodothermus obamensi STB05 (Ro-GBE) and Geobacillus thermoglucosidans STB02 (Gt-GBE) was investigated as a strategy to reduce the digestibility of corn starch. This dual GBE modification process caused a reduction of 25.8 % in rapidly digestible starch fraction in corn starch, which were more effective than single GBE-catalyzed modification with the same duration. Structural analysis indicated that the dual GBE modified product contained higher branching density, more abundant short branches, and shorter external chains than those in single GBE-modified product. These results demonstrated that a moderate Ro-GBE treatment prior to starch gelatinization caused several suitable alterations in starch molecules, which promoted the transglycosylation efficiency of the following Gt-GBE treatment. This dual GBE-catalyzed modification process offered an efficient strategy for regulating starch digestibility.

Potato starch modified by Streptococcus thermophilus GtfB enzyme has low viscoelastic and slowly digestible properties

Potato starch with high viscosity and digestibility cannot be added into some foods. To address this issue, a novel starch-acting enzyme 4,6-α-glucosyltransferase from Streptococcus thermophilus (StGtfB) was used. StGtfB decreased the iodine affinity and the molecular weight, but increased the degree of branching of starch at a mode quite different from glycogen 1,4-α-glucan branching enzyme (GBE). StGtfB at 5 U/g substrate mainly introduced DP 1-7 into amylose (AMY) or DP 1-12 branches into amylopectin (AMP), and increased the ratio of short- to long-branches from 0.32 to 2.22 or from 0.41 to 2.50. The DP 3 branch chain was the most abundant in both StGtfB-modified AMY and StGtfB-modified AMP. The DP < 6 branch chain contents in StGtfB-modified AMY were 42.68%, much higher than those of GBE-modified AMY. StGtfB significantly decreased viscoelasticity but still kept pseudoplasticity of starch. The modifications also slowed down the glucose generation rate of products at the mammalian mucosal α-glucosidase level. The slowly digestible fraction in potato starch increased from 34.29% to 53.22% using StGtfB of 5 U/g starch. This low viscoelastic and slowly digestible potato starch had great potential with respect to low and stable postprandial blood glucose.

Green and clean modification of cassava starch - effects on composition, structure, properties and digestibility

There is a growing need for clean and green labeling of food products among consumers globally. Therefore, development of green modified starches, to boost functionality, palatability and health benefits while reducing the negative processing impacts on the environment and reinforcing consumer safety is in high demand. Starch modification started in mid-1500s due to the inherent limitations of native starch restricting its commercial applications, with chemical modification being most common. However, with the recent push for "chemical-free" labeling, methods of physical and enzymatic modification have gained immense popularity. These methods have been successfully used in numerous studies to alter the composition, structure, functionality and digestibility of starch and in this review, studies reported on green modification of cassava starch, one of the most common utilized starches, within the last ten years have been critically reviewed. Recent research has introduced starch as an abundant, natural substrate for producing resistant starches through biophysical technologies that act as dietary fiber in the human body. It is evident that different techniques and processing parameters result in varying degrees of modification impacting the techno-functionality and digestibility of the resultant starch. This can be exploited by researchers and industrialists in order to customize starch functionality in accordance with application.

Structural characterization and physicochemical properties of starch from four aquatic vegetable varieties in China

Nelumbo nucifera Gaertn., Eleocharis dulcis, Sagittaria sagittifolia L., and Trapa bispinosa Roxb. are common aquatic vegetables that are rich in starch. Starches from these four aquatic vegetables and their applications in edible films were studied to facilitate full use of starch resources. Significant differences in transparency, freeze-thaw stability, water solubility index, swelling power, water and oil absorption capacities, starch particle morphology, and rheology were observed among the starches from these four aquatic vegetables. All starches exhibited a typical "A" type diffraction pattern. N. nucifera, E. dulcis, and S. sagittifolia starches have similar thermal properties, while T. bispinosa starch has a higher gelatinization temperature. S. sagittifolia starch film has the highest transparency and lower WVP and water solubility. These results will promote the development of products based on starch obtained from aquatic vegetables.

Improving the Stability and Curcumin Retention Rate of Curcumin-Loaded Filled Hydrogel Prepared Using 4αGTase-Treated Rice Starch

In this study, 4-α-glucanotransferase (4αGTase)-treated rice starch (GS) was added after 1-h (1 GS) and 96-h (96 GS) treatments to the aqueous phase of a curcumin-loaded emulsion to produce filled hydrogels (1 GS-FH and 96 GS-FH, respectively). The relative protective effects of the FH system, native rice starch-based filled hydrogel (RS-FH), and emulsion without starch (EM), on curcumin were evaluated based on ultraviolet (UV) stability and simulated gastrointestinal studies. The UV stability and curcumin retention after in vitro digestion of the filled hydrogels (FH) samples were greater than those of the EM samples. RS-FH showed a 2.28-fold improvement in UV stability over EM due to the higher viscosity of RS. 1 GS-FH and 96 GS-FH increased curcumin retention by 2.31- and 2.60-fold, respectively, and the microstructure of 96 GS-FH, determined using confocal laser microscopy, remained stable even after the stomach phase. These effects were attributed to the molecular structure of GS, with decreased amylopectin size and amylose content resulting from the enzyme treatment. The encapsulation of lipids within the GS hydrogel particles served to protect and deliver the curcumin component, suggesting that GS-FH can be applied to gel-type food products and improve the chemical stability of curcumin.

Novel Short-Clustered Maltodextrin as a Dietary Starch Substitute Attenuates Metabolic Dysregulation and Restructures Gut Microbiota in db/db Mice

Molecular structure of starch in daily diet is closely associated with diabetes management. By enzymatically reassembling α-1,4 and α-1,6 glycosidic bonds in starch molecules, we have synthesized an innovative short-clustered maltodextrin (SCMD) which slowly releases glucose during digestion. Here, we investigated the potential benefits of the SCMD-containing diet using diabetic db/db mice. As compared to a diet with normal starch, this dietary style greatly attenuated hyperglycemia and repaired symptoms associated with diabetes. Additionally, in comparison with acarbose (an α-glucosidase inhibitor) administration, the SCMD-containing diet more effectively accelerated brown adipose activation and improved energy metabolism of db/db mice. Furthermore, the SCMD-containing diet was a more suitable approach to improving the intestinal microflora than acarbose administration, especially the proliferation of Mucispirillum, Akkermansia, and Bifidobacterium. These results reveal a novel strategy for diabetes management based on enzymatically rebuilding starch molecules in the daily diet.

Progress in research and applications of cassava flour and starch: a review

The cassava flours and starches have elicited great use in the food and non-food industry. The diversity in cassava genotypes accounts for differences in end-product properties, and would require characterization of cassava varieties for suitability of culinary and processing. This review showed that screening criteria of cassava cultivars end-user properties include proximate contents, amylose content, structural, swelling, gelatinization and pasting characteristics, including freeze-thaw stability properties of cassava-derived flours and starches. Literature shows that the physiochemical properties vary with genetic factors (i.e. genotype). In this review, the amylose content was found to be the main genetic trait for discriminating the cassava varieties for gelatinization and pasting processes including resistant starches. Moreover, cassava derived raw materials (flours and starches) were found to have various application in baking, edible film, syrup, glucose, alcohol, and soups production.

Spontaneous fermentation tunes the physicochemical properties of sweet potato starch by modifying the structure of starch molecules

The effects of spontaneous fermentation on the molecular and physicochemical characteristics of sweet potato starch stored in tank during twelve months were investigated. From starch slurry collected during spontaneous fermentation, eight isolates showed amylolytic activity, which included two Acetobacter strains, five Bacillus strains and one Gluconacetobacter strain. By spontaneous fermentation, the amylose content and the average molecular weight of starch were significantly decreased. Besides, the native and fermented starches showed different amylopectin chain-length distribution patterns. Among them, no significant differences in granular morphology, granule size distribution, and crystalline structure. However, the thermal and pasting properties as well as the hardness of the starch gel differed significantly. Pearson's correlation analysis showed that the physicochemical properties was mainly influenced by the changes in the amylose content, amylopectin chain-length distribution as well as the average molecular weight of starch. These findings demonstrated the feasibility of spontaneous fermentation as a tool for modifying starches.

The AGPase Family Proteins in Banana: Genome-Wide Identification, Phylogeny, and Expression Analyses Reveal Their Involvement in the Development, Ripening, and Abiotic/Biotic Stress Responses

ADP-glucose pyrophosphorylase (AGPase) is the first rate-limiting enzyme in starch biosynthesis and plays crucial roles in multiple biological processes. Despite its importance, AGPase is poorly studied in starchy fruit crop banana (Musa acuminata L.). In this study, eight MaAGPase genes have been identified genome-wide in M. acuminata, which could be clustered into the large (APL) and small (APS) subunits. Comprehensive transcriptomic analysis revealed temporal and spatial expression variations of MaAPLs and MaAPSs and their differential responses to abiotic/biotic stresses in two banana genotypes, Fen Jiao (FJ) and BaXi Jiao (BX). MaAPS1 showed generally high expression at various developmental and ripening stages and in response to abiotic/biotic stresses in both genotypes. MaAPL-3 and -2a were specifically induced by abiotic stresses including cold, salt, and drought, as well as by fungal infection in FJ, but not in BX. The presence of hormone-related and stress-relevant cis-acting elements in the promoters of MaAGPase genes suggests that MaAGPases may play an important role in multiple biological processes. Taken together, this study provides new insights into the complex transcriptional regulation of AGPases, underlying their key roles in promoting starch biosynthesis and enhancing stress tolerance in banana.