Inclusion of silver nanoparticles for improving regenerated cellulose membrane performance and reduction of biofouling

"Bottom-up" and "top-down" strategies toward strong cellulose-based materials

Cellulose, as the most abundant natural polymer on Earth, has long captured researchers' attention due to its high strength and modulus. Nevertheless, transferring its exceptional mechanical properties to macroscopic 2D and 3D materials poses numerous challenges. This review provides an overview of the research progress in the development of strong cellulose-based materials using both the "bottom-up" and "top-down" approaches. In the "bottom-up" strategy, various forms of regenerated cellulose-based materials and nanocellulose-based high-strength materials assembled by different methods are discussed. Under the "top-down" approach, the focus is on the development of reinforced cellulose-based materials derived from wood, bamboo, rattan and straw. Furthermore, a brief overview of the potential applications fordifferent types of strong cellulose-based materials is given, followed by a concise discussion on future directions.

Electrochemical Characterization of Charged Membranes from Different Materials and Structures via Membrane Potential Analysis

Electrochemical characterization of positively and negatively charged membranes is performed by analyzing membrane potential values on the basis of the Teorell-Meyer-Sievers (TMS) model. This analysis allows the separate estimation of Donnan (interfacial effects) and diffusion (differences in ions transport through the membrane) contributions, and it permits the evaluation of the membrane's effective fixed charge concentration and the transport number of the ions in the membrane. Typical ion-exchange commercial membranes (AMX, Ionics or Nafion) are analyzed, though other experimental and commercial membranes, which are derived from different materials and have diverse structures (dense, swollen or nanoporous structures), are also considered. Moreover, for some membranes, changes associated with different modifications and other effects (concentration gradient or level, solution stirring, etc.) are also analyzed.

Green Synthesis of Silver Nanoparticles and Its Combination with Pyropia columbina (Rhodophyta) Extracts for a Cosmeceutical Application

We report the green synthesis of silver nanoparticles (AgNPs) by using daisy petals (Bellis perennis), leek (Allium porrum) and garlic skin (Allium sativum) as reducing agents and water as solvent. AgNPs are obtained with high monodispersity, spherical shapes and size ranging from 5 to 35 nm and characterized by UV-Vis and TEM techniques. The obtained yields in AgNPs are in concordance with the total phenolic content of each plant. We also study the incorporation of AgNPs in combination with the red algae Pyropia columbina extracts (PCE) into cosmetic formulations and analyze their combined effect as photoprotective agents. Moreover, we carry out the inclusion of the PCE containing mycosporine-like amino acids (MAAs), which are strong UV-absorbing and antioxidant compounds, into β-cyclodextrin (βCD) and pNIPAM nanoparticles and analyze stability and release. The thermoresponsive polymer is grown by free radical polymerization using N-isopropylacrylamide (NIPAM) as the monomer, N,N'-methylenebisacrylamide (BIS) as the cross-linker, and 2,2'-azobis(2-methylpropionamidene) (V50) as the initiator, while βCD complex is prepared by heating in water. We evaluate the nanoparticle and βCD complex formation by UV-Vis and FT-IR, and NMR spectroscopies, respectively, and the nanoparticles' morphology, including particle size, by TEM. The cosmetic formulations are subsequently subjected to accelerated stability tests and photoprotective analyses: a synergistic effect in the combination of AgNPs and PCE in photoprotection was found. It is not related to a UV screen effect but to the antioxidant activity, having potential against photoaging.

Animal Cellulose with Hierarchical Structure Isolated from Halocynthia aurantium Tunic as the Basis for High-Performance Pressure-Resistant Nanofiltration Membrane

The structure and transport properties of the new Cellokon-AKH membrane based on animal cellulose obtained from tunic of ascidian Halocynthia aurantium were studied. The results of scanning electron microscopy (SEM), FTIR spectroscopy, and the X-ray diffraction data revealed significant differences in the structure and morphology of upper and lower surfaces of this layered film membrane based on animal cellulose. It was shown that the membrane surface is a network of intertwined cellulose fibers, with both denser and looser areas present on the lower surface compared to the completely uniform morphology of the main part of the upper surface. The hierarchical structure of tunicin-based outgrowths evenly distributed over the upper surface was determined and analyzed. The 3D visual representation of the surface structure was performed with the surface reconstruction technique using scanning electron microscope images. A surface model was calculated from the aligned images based on the photogrammetric approach. The transport properties of samples with different prehistory with respect to ethanol, water, and their mixtures of different compositions were studied depending on the pressure. Representing an alcohol-containing gel film in its original state, as solvents are removed, the membrane transforms into a low-permeability fibrillary organized selective film. The obtained results confirmed the possibility of using Cellokon-AKH (dried form) for the filtration of substances with a molecular weight of more than 600 Da in various media. Further study of this new material will allow to get closer to understanding the structure of the studied seabed inhabitants and to use these natural resources more efficiently.

Functionalization of PEG-AgNPs Hybrid Material to Alleviate Biofouling Tendency of Polyethersulfone Membrane

Membrane-based processes are a promising technology in water and wastewater treatments, to supply clean and secure water. However, during membrane filtration, biofouling phenomena severely hamper the performance, leading to permanent detrimental impacts. Moreover, regular chemical cleaning is ineffective in the long-run for overcoming biofouling, because it weakens the membrane structure. Therefore, the development of a membrane material with superior anti-biofouling performance is seen as an attractive option. Hydrophilic-anti-bacterial precursor polyethylene glycol-silver nanoparticles (PEG-AgNPs) were synthesized in this study, using a sol-gel method, to mitigate biofouling on the polyethersulfone (PES) membrane surface. The functionalization of the PEG-AgNP hybrid material on a PES membrane was achieved through a simple blending technique. The PES/PEG-AgNP membrane was manufactured via the non-solvent induced phase separation method. The anti-biofouling performance was experimentally measured as the flux recovery ratio (FRR) of the prepared membrane, before and after incubation in E. coli culture for 48 h. Nanomaterial characterization confirmed that the PEG-AgNPs had hydrophilic-anti-bacterial properties. The substantial improvements in membrane performance after adding PEG-AgNPs were evaluated in terms of the water flux and FRR after the membranes experienced biofouling. The results showed that the PEG-AgNPs significantly increased the water flux of the PES membrane, from 2.87 L·m⁻²·h⁻¹ to 172.84 L·m⁻²·h⁻¹. The anti-biofouling performance of the PES pristine membrane used as a benchmark showed only 1% FRR, due to severe biofouling. In contrast, the incorporation of PEG-AgNPs in the PES membrane decreased live bacteria by 98%. It enhanced the FRR of anti-biofouling up to 79%, higher than the PES/PEG and PES/Ag membranes.

Sustainable multilayer biomass carbon and polymer hybrid column as potential antibacterial water filter

Stipulation of fresh water for domestic use without any microbial, organic and inorganic contaminants is of high need. Sustainable, efficient, cost-effective and robust water purification technologies is of high need and it can be achieved using nanomaterials and their composite. Nanostructured graphene has unique properties like high surface to volume ratio, higher absorbability, reusability with minimal chemical alterations, and low cytotoxicity. From the validation of these properties, we have developed PLLA-Ag@graphene sandwich structures as an effective adsorbate for water purification application. As the real water bodies have lot of bacterial contaminants, the material is also designed as efficient adsorbate with antibacterial efficacy. In view of achieving these objectives, we have synthesized PLLA fibre mats by electrospinning method, followed by PLLA-Graphene and Ag decorated PLLA-graphene mats. The crystallite size for graphite and Ag@graphene was calculated as 30.82 nm and 43.79 nm, respectively. Furthermore, the UV analysis of Ag@graphene shows two peaks corresponding to graphene and Ag NP at 285 nm and 407 nm respectively. The layers were assembled in the order of polymeric fibre, as-fired biomass graphite, Ag@graphene for methodical filtration process. The filtration efficacy of the filtrate was tested using sewage water and the results shows higher contamination removal percentage of 87 % with TDS values in the drinking water standards after filtration. The antibacterial efficacy results also evidence of the potentialities of the hybrid system towards water purification application.

Synthesis approach-dependent antiviral properties of silver nanoparticles and nanocomposites

Numerous viral infections are common among humans, and some can lead to death. Even though conventional antiviral agents are beneficial in eliminating viral infections, they may lead to side effects or physiological toxicity. Silver nanoparticles and nanocomposites have been demonstrated to possess inhibitory properties against several pathogenic microbes, including archaea, bacteria, fungi, algae, and viruses. Its pronounced antimicrobial activity against various microbe-mediated diseases potentiates its use in combating viral infections. Notably, the appropriated selection of the synthesis method to fabricate silver nanoparticles is a major factor for consideration as it directly impacts antiviral efficacy, level of toxicity, scalability, and environmental sustainability. Thus, this article presents and discusses various synthesis approaches to produce silver nanoparticles and nanocomposites, providing technological insights into selecting approaches to generate antiviral silver-based nanoparticles. The antiviral mechanism of various formulations of silver nanoparticles and the evaluation of its propensity to combat specific viral infections as a potential antiviral agent are also discussed.

Green Silver Nanoparticles Embedded in Cellulosic Network for Fresh Food Packaging

The demand for increasing the shelf life of fresh food as well as the need for protecting the food against foodborne infections warrant the demand for increasing the shelf life of fresh food. The incorporation of nanoparticles into the packaging material can enhance the preservation of perishable foods. Silver nanoparticles (AgNPs), in particular, have antibacterial, anti-mold, anti-yeast, and anti-viral activities can be embedded into the biodegradable packaging materials for this purpose. This study focuses on antimicrobial packaging materials for food by mixing the extracts of different plants with silver nitrate and depositing this mixture as a layer on the blotting papers, which are thick sheets of paper made of cellulose. Because the blotting papers are highly absorbent and porous, silver nitrate solution along with the plant extracts can be easily applied and allowed for in situ synthesis of AgNPs. Subsequently, these papers were analyzed and characterized using scanning electron microscopy, transmission electron microscopy, atomic absorption spectroscopy, and energy dispersive X-ray analysis. The coated paper exhibited good antibacterial activity against Escherichia coli and Staphylococcus aureus. Furthermore, the coated paper when used as a packaging material for tomatoes and coriander leaf, the shelf life was extended to about 30 days and 15 days respectively. The prepared cost-effective silver packing material can be used in food packaging for various perishable foods.

Development of Polyvinylidene Fluoride Membrane by Incorporating Bio-Based Ginger Extract as Additive

Biofouling on the membrane surface leads to performance deficiencies in membrane filtration. In this study, the application of ginger extract as a bio-based additive to enhance membrane antibiofouling properties was investigated. The extract was dispersed in a dimethyl acetamide (DMAc) solvent together with polyvinylidene fluoride (PVDF) to enhance biofouling resistance of the resulting membrane due to its antibiotic property. The concentrations of the ginger extract in the dope solution were varied in the range of 0–0.1 wt %. The antibacterial property of the resulting membranes was assessed using the Kirby Bauer disc diffusion method. The results show an inhibition zone formed around the PVDF/ginger membrane against Escherichia coli and Staphylococcus aureus demonstrating the efficacy of the residual ginger extract in the membrane matrix to impose the antibiofouling property. The addition of the ginger extract also enhanced the hydrophilicity in the membrane surface by lowering the contact angle from 93° to 85°, which was in good agreement with the increase in the pure water flux of up to 62%.

Biomedical Applications of Silver Nanoparticles: An Up-to-Date Overview

During the past few years, silver nanoparticles (AgNPs) became one of the most investigated and explored nanotechnology-derived nanostructures, given the fact that nanosilver-based materials proved to have interesting, challenging, and promising characteristics suitable for various biomedical applications. Among modern biomedical potential of AgNPs, tremendous interest is oriented toward the therapeutically enhanced personalized healthcare practice. AgNPs proved to have genuine features and impressive potential for the development of novel antimicrobial agents, drug-delivery formulations, detection and diagnosis platforms, biomaterial and medical device coatings, tissue restoration and regeneration materials, complex healthcare condition strategies, and performance-enhanced therapeutic alternatives. Given the impressive biomedical-related potential applications of AgNPs, impressive efforts were undertaken on understanding the intricate mechanisms of their biological interactions and possible toxic effects. Within this review, we focused on the latest data regarding the biomedical use of AgNP-based nanostructures, including aspects related to their potential toxicity, unique physiochemical properties, and biofunctional behaviors, discussing herein the intrinsic anti-inflammatory, antibacterial, antiviral, and antifungal activities of silver-based nanostructures.