Magnetic chitosan-based adsorbent prepared via Pickering high internal phase emulsion for high-efficient removal of antibiotics

Development of calcium phosphate-chitosan composites with improved removal capacity toward tetracycline antibiotic: Adsorption and electrokinetic properties

Two eco-friendly and highly efficient adsorbents, namely brushite-chitosan (DCPD-CS), and monetite-chitosan (DCPA-CS) composites were synthesized via a simple and low-cost method and used for tetracycline (TTC) removal. The removal behavior of TTC onto the composite particles was studied considering various parameters, including contact time, pollutant concentration, and pH. The maximum TTC adsorption capacity was 138.56 and 112.48 mg/g for the DCPD-CS and DCPA-CS, respectively. Increasing the pH to 11 significantly enhanced the adsorption capacity to 223.84 mg/g for DCPD-CS and 205.92 mg/g for DCPA-CS. The antibiotic adsorption process was well-fitted by the pseudo-second-order kinetic and Langmuir isotherm models. Electrostatic attractions, complexation, and hydrogen bonding are the main mechanisms governing the TTC removal process. Desorption tests demonstrated that the (NH4)2HPO4 solution was the most effective desorbing agent. The developed composites were more efficient than DCPD and DCPA reference samples and could be used as valuable adsorbents of TTC from contaminated wastewater.

Straw-derived biochar for the removal of antibiotics from water: Adsorption and degradation mechanisms, recent advancements and challenges

Antibiotics, a kind of containments with the properties of widely distributed and difficult to degrade, has aroused extensive attention in the world. As a prevalent agricultural waste, straws can be utilized to prepare biochar (straw-derived biochar, SBC) to remove antibiotics from aquatic environment. To date, although a number of review papers have summarized and discussed research on biochar application in wastewater treatment and soil remediation, there are few reviews on SBC for antibiotic removal. Due to the limitations of poor adsorption and degradation performance of the pristine SBC, it is necessary to modify SBC to improve its applications for antibiotics removal. The maximum antibiotic removal capacity of modified SBC could reach 1346.55 mg/g. Moreover, the adsorption mechanisms between modified SBC and antibiotics mainly involve π-π interactions, electrostatic interactions, hydrophobic interactions, and charge dipole interactions. In addition, the modified SBC could completely degrade antibiotics within 6 min by activating oxidants, such as PS, PDS, H2O2, and O3. The mechanisms of antibiotic degradation by SBC activated oxidants mainly include free radicals (including SO4•-, •OH, and O2•-) and non-free radical pathway (such as, 1O2, electrons transfer, and surface-confined reaction). Although SBC and modified SBC have demonstrated excellent performance in removing antibiotics, they still face some challenges in practical applications, such as poor stability, high cost, and difficulties in recycling. Therefore, the further research directions and trends for the development of SBC and biochar-based materials should be taken into consideration.

Super absorbent glutaric anhydride-modified agar: Structure, properties, and application in biomaterial delivery

Agar was modified with glutaric anhydride (GA) in this study to expand its application in food and medicine. Glutaric anhydride-modified agar (GAR) can maintain high gel strength (1247.4 g/cm²) and improved transparency (82.7 %). The esterified agar formed by GA further formed a cross-linking molecule structure by increasing the reaction temperature. Notably, excellent freeze-thaw stability (24.1 %) and swelling property (3116.6 %) of GAR indicated that the carboxyl-terminal of modified agar improves its affinity with water. Therefore, satisfactory water permeability and expansive stone enable agar films to achieve high water absorption. Furthermore, GAR films exhibit a specific absorption capacity of tetracycline hydrochloride in weak acid solution, thereby suggesting its potential application as a sustainable drug delivery carrier. Finally, the structure of the modified agar was analyzed to explain the mechanism of binding water. Cryo-scanning electron microscopy (SEM) depicted the porous structure of the agar gel responsible for swelling, drug loading, and release. Low-field NMR results showed that GA improves agar gel's binding and free water content. According to our research results, these GAR hydrogel membranes with excellent properties have the potential to be used as effective drug delivery materials.

Preparation and characterization of chitosan-curdlan composite magnetized by zinc ferrite for efficient adsorption of tetracycline antibiotics in water

Tetracycline (TC) antibiotic-related water pollution directly threatens human health and ecosystems. Here, a zinc ferrite/chitosan-curdlan (ZNF/CHT-CRD) magnetic composite was prepared via a co-precipitation method to be used as a novel, green adsorbent for TC removal from water. Benefiting from a multitude of functional groups, CRD was first crosslinked with CHT and then magnetized with ZNF to provide an easy separation from the solution with an external magnetic force. The successful synthesis and magnetization of the composite were verified with different characterization techniques. The effect of solution pH and composite dosage was carefully evaluated. The optimum solution pH and composite dosage were 6 and 0.65 g/L, respectively, with complete TC removal. The adsorption process by the magnetic composite followed the pseudo-first-order kinetics and Langmuir isotherm models. The maximum adsorption capacity determined from the Langmuir model was 371.42 mg/g at 328 K. Thermodynamic parameters indicated endothermic and spontaneous adsorption. Meanwhile, the composite could be readily separated from the aqueous solution thanks to its magnetic property. Then, it was regenerated with acetone and ethanol to be reused for five more successive cycles. Interestingly, the prepared adsorbent was highly stable and performant in removing TC, maintaining approximately 90 % of its first-cycle adsorption capacity. The adsorption mechanism was primarily attributed to electrostatic and hydrogen bonding attractions. Overall, the currently developed adsorbent could be a more favorable, efficient, and cost-effective candidate than other magnetic chitosan-based composites. These features make it applicable for treating water contaminated with various pharmaceutical pollutants with high separation efficiency and easy recovery under successive adsorption-desorption cycles.

Selective removal and recovery of Ni(ii) using a sulfonic acid-based magnetic rattle-type ion-imprinted polymer: adsorption performance and mechanisms

It is significant to selectively remove Ni(ii) ions from wastewater. A novel sulfonic acid-based magnetic rattle-type ion-imprinted polymer (Fe₃O₄@void@IIP-Ni(ii)) was designed by taking advantage of the strong interaction between Ni(ii) and sulfonic acid groups. Green polymerization was used to synthesize Fe₃O₄@void@IIP-Ni(ii), which was then investigated using SEM, TEM, FT-IR, VSM, TGA, EDS, and XPS. The adsorption results indicated that the prepared imprinted material had a short adsorption equilibrium time (10 min), good magnetic responsiveness (about 5 seconds) and high adsorption capacity (44.64 mg g^-1) for Ni(ii) at the optimal pH of 6.0. The removal rate of Ni(ii) was up to 99.97%, and the adsorption process was spontaneous and endothermic, following the pseudo-secondary kinetic model and Langmuir model. The selectivity coefficients of the imprinted material were 4.67, 4.62, 8.94 and 9.69 for Ni(ii)/Co(ii), Ni(ii)/Cu(ii), Ni(ii)/Pb(ii) and Ni(ii)/Zn(ii), respectively. The regeneration and application of the imprinted material in actual water samples have been verified. Moreover, the mechanism of selective adsorption for Ni(ii) was investigated by FTIR, XPS and density functional theory (DFT) calculation. The results showed that the imprinted sorbent has a strong binding ability with Ni(ii), and the adsorption of Ni(ii) on Fe₃O₄@void@IIP-Ni(ii) was the result of the co-coordination of O atoms of the sulfonic acid groups and N atoms of -N-C[double bond, length as m-dash]O groups in AMPS with Ni(ii).

Sustainable adsorptive removal of antibiotic residues by chitosan composites: An insight into current developments and future recommendations

During COVID-19 crisis, water pollution caused by pharmaceutical residuals have enormously aggravated since millions of patients worldwide are consuming tons of drugs daily. Antibiotics are the preponderance pharmaceutical pollutants in water bodies that surely cause a real threat to human life and ecosystems. The excellent characteristics of chitosan such as nontoxicity, easy functionality, biodegradability, availability in nature and the abundant hydroxyl and amine groups onto its backbone make it a promising adsorbent. Herein, we aimed to provide a comprehensive overview of recent published research papers regarding the removal of antibiotics by chitosan composite-based adsorbents. The structure, ionic form, optimum removal pH and λ_max of the most common antibiotics including Tetracycline, Ciprofloxacin, Amoxicillin, Levofloxacin, Ceftriaxone, Erythromycin, Norfloxacin, Ofloxacin, Doxycycline, Cefotaxime and Sulfamethoxazole were summarized. The development of chitosan composite-based adsorbents in order to enhance their adsorption capacity, reusability and validity were presented. Moreover, the adsorption mechanisms of these antibiotics were explored to provide more information about adsorbate-adsorbent interactions. Besides the dominant factors on the adsorption process including pH, dosage, coexisting ions, etc. were discussed. Moreover, conclusions and future recommendations are provided to inspire for further researches.

Critical review on adsorptive removal of antibiotics: Present situation, challenges and future perspective

This review gives a proper dedicated understanding of the contamination level, sources, and biological dangers related with different classes of antibiotics in consumable water. The literature on the adsorption of antibiotics is relatively uncommon and developments are still under progression, especially for adsorbents other than activated carbon. Also, adsorption technique has already been applied vastly for water treatment. Notwithstanding significant progressions, designed natural wastewater treatment frameworks are just bearably effective (48-77%) in the expulsion of antibiotics. Hence, the compilation of available literature especially for antibiotic adsorption was much needed. Moreover, the conventional adsorbents have some limitations of their own. In this study, the main focus was laid on unconventional adsorbents such as Biochar, Biopolymers, Carbon Nanotubes, Clays, Metal-Organic Frameworks, Microalgae and some miscellaneous adsorbents. The mechanism of adsorption by the unconventional adsorbents includes electrostatic interactions, π-π bonding, weak Van der Waal forces, H-bonding and surface complexation, which was similar to that of conventional adsorbents and hence these unconventional adsorbents can easily replace the costlier conventional adsorbents with even better adsorption efficiency. This paper also briefly discussed the thermodynamics, adsorption equilibrium; isotherm and kinetics of adsorption. This review paper seizes the critical advances of adsorption phenomenon at various interfaces and lays the foundation for current scenario associated with further progress. Besides, this study would help in understanding the antibiotic adsorption, cost estimation and future goals that will attract the young the researchers of this field.

Development of porous material via chitosan-based Pickering medium internal phase emulsion for efficient adsorption of Rb+, Cs+ and Sr2

The radioactive Rb⁺, Cs⁺ and Sr²⁺ have serious threat for the aquatic life and human health, its removal has been granted increasing concern. Hence the adsorbent with excellent adsorption performance and favourable reusability is strongly demanded. This work prepared a novel porous polymer of chitosan-g-polyacrylamide (CTS-g-PAM) by grafting the acrylamide (AM) onto the chitosan (CTS) with sufficient pore structure via an eco-friendly surfactant-free (corn oil)-in-water Pickering medium internal phase emulsion (O/W Pickering MIPE), solely stabilized by CTS. Interestingly, its pore structure could be tuned by varying the emulsion character via changing the molecular weight and concentration of CTS, as well as the pH values. Due to the abundant -COO^- and -NH₂ functional groups in the porous material of CTS-g-PAM, the high adsorption capacities of 195.43, 237.44 and 185.63 mg/g for Rb⁺, Cs⁺ and Sr²⁺ could be reached within 40, 30 and 20 min, respectively. Moreover, the CTS-g-PAM had excellent regeneration ability and reusability. Herein, we provided a feasible and low-cost pathway for preparation of the porous adsorbent with tunable porous structure for adsorption and separation application.

Fundamentals and Design-Led Synthesis of Emulsion-Templated Porous Materials for Environmental Applications

Emulsion templating is at the forefront of producing a wide array of porous materials that offers interconnected porous structure, easy permeability, homogeneous flow-through, high diffusion rates, convective mass transfer, and direct accessibility to interact with atoms/ions/molecules throughout the exterior and interior of the bulk. These interesting features together with easily available ingredients, facile preparation methods, flexible pore-size tuning protocols, controlled surface modification strategies, good physicochemical and dimensional stability, lightweight, convenient processing and subsequent recovery, superior pollutants remediation/monitoring performance, and decent recyclability underscore the benchmark potential of the emulsion-templated porous materials in large-scale practical environmental applications. To this end, many research breakthroughs in emulsion templating technique witnessed by the recent achievements have been widely unfolded and currently being extensively explored to address many of the environmental challenges. Taking into account the burgeoning progress of the emulsion-templated porous materials in the environmental field, this review article provides a conceptual overview of emulsions and emulsion templating technique, sums up the general procedures to design and fabricate many state-of-the-art emulsion-templated porous materials, and presents a critical overview of their marked momentum in adsorption, separation, disinfection, catalysis/degradation, capture, and sensing of the inorganic, organic and biological contaminants in water and air.

Chitosan as additive affects the bacterial community, accelerates the removals of antibiotics and related resistance genes during chicken manure composting

Manures, storages for antibiotic resistance genes (ARGs), pollute soil and water as well as endanger human health. Recently, we have been searching a better solution to remove antibiotics and ARGs during aerobic composting. Here, the dynamics of chitosan addition on the profiles of 71 ARGs, bacterial communities, chlortetracycline (CTC), ofloxacin (OFX) were investigated in chicken manure composting and compared with zeolite addition. Chitosan addition effectively reduces antibiotics contents (CTC under detection limit, OFX 90.96%), amounts (18) and abundance (56.7%, 11.1% higher than zeolite addition) of ARGs and mobile genetic elements (MGEs) after 42 days composting. Network analysis indicated that a total of 27 genera strains assigned into 4 phyla (Firmicutes, Proteobacteria, Actinobacteria and Bacteroidetes) were the potential hosts of ARGs. Redundancy analysis (RDA) demonstrated that bacterial community succession is the main contributor in the variation of ARGs. Overall, chitosan addition may effect bacterial composition by influencing physic-chemical properties and the concentration of antibiotics, Cu²⁺, Zn²⁺ to reduce the risk of ARG transmission. This study gives a new strategy about antibiotics and ARGs removal from composting on the basis of previous studies.

Removal of antibiotics from aqueous solution by using porous adsorbent templated from eco-friendly Pickering aqueous foams

The aqueous foam template without any solvent and only using the particles stabilizer has attracted much attention for preparation of the porous adsorbents. Herein, a novel porous adsorbent was fabricated via thermal-initiated polymerization of Pickering aqueous foams, which was stabilized by the natural sepiolite (Sep) and pine pollen, and utilized for the removal of antibiotic from aqueous solution. The stabilizing mechanism of Pickering aqueous foam of that the Sep was modified with the leaching substance from pine pollen and arranged orderly around the bubble to form a dense "shell" structure was revealed. The adsorbents possessed the hierarchical porous structure and excellent adsorption performance for antibiotic of chlorotetracycline hydrochloride (CTC) and tetracycline hydrochloride (TC). The equilibrium adsorption capacities of CTC and TC were achieved with 465.59 and 330.59 mg/g within 60 min at 25°C, respectively. The adsorption process obeyed Langmuir model and pseudo-second-order adsorption kinetic model. This work provided eco-friendly approach for fabricate porous adsorbents for wastewater treatment.

Zeolitic imidazolate framework-8/graphene oxide/magnetic chitosan nanocomposites for efficient removal of Congo red from aqueous solution

A novel bio-adsorbent toward Congo red with large adsorption capacity.

Bio-Compatible Ca-BDC/Polymer Monolithic Composites Templated from Bio-Active Ca-BDC Co-Stabilized CO2-in-Water High Internal Phase Emulsions

Because of the nontoxic solvents contained in CO2-in-water emulsions, porous polymer composites templated from these emulsions are conducive for bio-applications. Herein, bio-active rod-like calcium-organic framworks (Ca-BDC MOFs, BDC= 1,4-benzenedicarboxylate anion) particles co-stabilized CO2-in-water high internal phase emulsion (C/W HIPE) in the presence of polyvinyl alcohol (PVA) is first presented. After curing of the continuous phase, followed by releasing CO2, integral 3D macro-porous Ca-BDC monolith and Ca-BDC/Poly(2-hydroxyethyl methacrylate-co-acrylamide) HIPEs monolithic composites [Ca-BDC/P(AM-co-HEMA)HIPEs] with open-cell macro-porous structures were successfully prepared. The pore structure of these porous composite can be tuned by means of tailoring the Ca-BDC dosage, carbon dioxide pressure, and continuous phase volume fractions in corresponding C/W HIPEs. Results of bio-compatibility tests show that these Ca-BDC/P(AM-co-HEMA)HIPEs monoliths have non-cytotoxicity on HepG2 cells; also, the E. coli can grow either on the surfaces or inside these monoliths. Furthermore, immobilization of β-amylase on these porous composite presents that β-amylase can be well-anchored into the porous polymer composites, its catalytic activity can be maintained even after 10 cycles. This work combined bio-active MOFs Ca-BDC, bio-compatible open-cell macroporous polymer PAM-co-HEMA and green C/W HIPEs to present a novel and facile way to prepare interconnected macro-porous MOFs/polymer composites. Compared with the existing other well-known materials such as hydrogels, these porous composites possess well-defined tunable pore structures and superior bio-activity, thereby have promising applications in bio-tissue engineering, food, and pharmaceutical.

Preparation of porous adsorbent via Pickering emulsion template for water treatment: A review

Porous materials as emerging potential adsorbents have received much more attention because they are capable of capturing various pollutants with fast adsorption rate, high adsorption capacity, good selectivity and excellent reusability. In order to prepare porous materials with decent porous structure, Pickering emulsion template method has been proved to be one of the most effective technologies to create pore structure. This paper reviewed comprehensively the latest research progress on the preparation of porous materials from various Pickering emulsions and their applications in the decontamination of pollutants (e.g., heavy metal ions, organic pollutants) and in the oil/water separation. It was expected that the summaries and discussions in this review will provide insights into the design and fabrication of new efficient porous adsorbents, and also give us a better understanding of the subject.

Chitosan functionalized magnetic graphene oxide nanocomposite for the sensitive and effective determination of alkaloids in hotpot

Chitosan functionalized magnetic graphene oxide nanocomposite (Fe₃O₄@SiO₂@CS/GO) was successfully fabricated via a facile amide reaction between chitosan and graphene oxide. A novel extraction method using Fe₃O₄@SiO₂@CS/GO as nanoadsorbent was developed and applied to the efficient extraction and determination of multiple alkaloids from the complex matrix. The composition and structure of the nanoadsorbent was systematically characterized by various techniques. The nanoadsorbent possesses performances of high efficiency, easy operation, superparamagnetism, environment friendly and economic feasibility. The adsorption mechanism for alkaloids included π-π electron-donor-acceptor interaction, cation-π interaction and hydrogen bonding. The principal parameters influencing extraction procedure such as adsorbent dosage, pH, adsorption time, desorption conditions and regeneration cycles were investigated and optimized. Under the optimized conditions, the method exhibited good linear dynamic range with correlation coefficient (r²) higher than 0.997 and the limit of detection (LOD) was among 0.016--0.092 μg kg^-1. Intra- and inter-day relative standard deviations (RSDs) were <10%. These results indicated that the developed method was successfully applied for simultaneous detection of alkaloids in hotpot. This study provided valuable guidance and effective method for the analysis of alkaloids in intricate interference system.

A novel Biochar modified by Chitosan-Fe/S for tetracycline adsorption and studies on site energy distribution

A novel wasted sludge-based Biochar modified by Chitosan and Fe/S (BCFe/S) was prepared for tetracycline (TC) removal from water. To investigate the similarities and differences in adsorption behaviors between Biochar and BCFe/S, characterization, kinetics, isotherms and thermodynamics were discussed. The studies on site energy distribution (SED) were also presented. The results showed that the maximum TC adsorption amount was 51.78 mg/g for Biochar, while it was 183.01 mg/g for BCFe/S-4. Meanwhile, electrostatic attraction, π-π stacking, pore filling, silicate bonding and hydrogen bonding were the main adsorption mechanisms for TC removal by Biochar. Besides above mechanisms, chelating and ion exchange were also accounted for adsorption mechanisms for TC uptake by BCFe/S-4. Moreover, SED results revealed that the surface of Biochar was more homogeneous while the surface of BCFe/S-4 was more heterogeneous at higher temperature. Findings of this work could offer valuable information in designing adsorbents and investigating adsorption mechanisms.

Removal of tetracycline from polluted water by chitosan-olive pomace adsorbing films

This paper focuses on the removal of tetracycline from polluted water by chitosan-olive pomace adsorbing films. More specifically, both raw olive solid wastes (olive pomace) and the olive solid wastes/chitosan composite were compared and used for this purpose. Adsorption capacities values of 16 mg × g^-1 and 1.6 mg × g^-1 were obtained for the two adsorbents respectively. However, chitosan/olive pomace is proposed as suitable for environmental applications avoiding the dispersion of the pomace blocked inside the chitosan film. To detail the adsorption process, the effect of several experimental parameters such as the pH values, ionic strength, amount of adsorbent and pollutant and temperature values was investigated. The results showed that the adsorption process improved increasing the pH values, with a maximum at pH 8, and it was negatively affected by the presence of salts that retarded the adsorption. Indeed, the desorption of tetracycline was obtained in a MgCl₂ 2 M solution. So, a low-cost and cleaner approach, fundamental for the pollutant recovery and for an adsorbent safe reuse, for several cycles of adsorption/desorption, transforming a waste in resource is presented. The kinetics, isotherms models of adsorption and the thermodynamic parameters (ΔG°, ΔH° and ΔS°) were also evaluated observing that the physisorption of the pollutant occurred with and an endothermic character (ΔH° > 0) with ΔG° < 0 and ΔS° > 0. The use of Advanced Oxidation Processes was proposed as possible alternative to the tetracycline recovery, obtaining its degradation after the desorption. With the present paper, the alternative reuse of olive pomace is reported avoiding its disposal in the environment claiming its potential in the removal/recover of emerging contaminants from water.