Pullulan based oral thin film formulation of zolmitriptan: Development and optimization using factorial design

Review on Recent Advance of 3DP-Based Pediatric Drug Formulations

Three-dimensional printing (3DP) has emerged as a game-changing technology in the pharmaceutical industry, providing novel formulation development in the pharmaceutical sector as a whole, which improved patients' individualized therapy. The pediatric population is among the key targets for individualized therapy. Children are a diverse group that includes neonates, infants, and toddlers, each with unique physiological characteristics. Treatment adherence has a significant impact on safe and effective pharmacotherapy in the pediatric population. Improvement of therapeutic dosage forms that provide for the special demands of the pediatric population is a significant challenge for the pharmaceutical industry. Scientists have actively explored 3DP, a quick prototype manufacturing method that has emerged in recent years from many occupations due to its benefits of modest operation, excellent reproducibility, and vast adaptability. This review illuminates the most widely used 3DP technology and its application in the development of pediatric-friendly drug formulations. This 3DP technology allows optimization of pediatric dosage regimens and cases that require individualized treatment, such as geriatrics, renal impairment, liver impairment, critically ill, pregnancy populations, and drugs with nonlinear pharmacokinetics. The fast evolution of 3DP expertise, in addition to the introduction of pharmaceutical inks, has enormous promise for patient dosage form customization.

Incorporation of Loratadine-Cyclodextrin Complexes in Oral Thin Films for Rapid Drug Delivery

Rapidly dissolving polymer thin films, or oral thin films (OTFs), have recently emerged as an improved oral drug delivery vehicle with its ability to bypass liver first pass metabolism, longer shelf-life, and simpler transport and distribution requirements, compared to traditional tablets and liquid formulations. Loratadine (LOR), an antihistamine commonly used to treat allergic rhinitis, undergoes liver first pass metabolism and is a prime candidate for incorporation within an OTF. However, loratadine is a BCS II drug with low aqueous solubility. Herein, the solubility of loratadine was improved by complexation with methyl β-cyclodextrin (MBCD) by co-evaporation of 2:1, 1:1, and 1:2 LOR:MBCD ratios and incorporation into a pullulan-based OTF at 4 wt% by solvent casting at 50 °C for 30 - 35 min. A therapeutically relevant 10 mg LOR dose could be prepared in a 3 cm by 3 cm OTF. The feasibility of complexation was observed with a Bs-type phase solubility diagram, and complexation itself was confirmed via differential scanning calorimetry (DSC) by disappearance of the LOR melting peak, Fourier-transform infrared spectroscopy (FTIR) by shifting of the C=O peak, via 1H NMR spectroscopy by downfield shifting and change in peak multiplicity of the LOR aromatic protons, and via diffusion-ordered spectroscopy by a decrease in the diffusion coefficient of LOR:MBCD complex. LOR:MBCD could be incorporated homogeneously throughout an OTF, and LOR:MBCD OTFs exhibited reasonable mechanical strength and endured 12 ± 3 folds before breaking. LOR:MBCD OTFs disintegrated within 38 ± 10 s. The cumulative in vitro release of LOR:MBCD OTFs peaked at 80 % within 3-4 min of dissolution, and LOR in LOR:MBCD OTFs exhibited permeability across a 0.22 μm nitrocellulose membrane, demonstrating its applicability as a rapid drug delivery vehicle.

Pullulan-Based Spray-Dried Mucoadhesive Microparticles for Sustained Oromucosal Drug Delivery

Mucoadhesive microparticles for oromucosal drug delivery offer several advantages, including intimate contact with the mucosa, delivery to less accessible regions, extended residence time, sustained drug release, reduced irritation, and improved patient compliance. In this study, pullulan was used to prepare mucoadhesive spray-dried microparticles for delivering benzydamine hydrochloride (BZH) to oral mucosa. The BZH-pullulan spray-dried microparticles had a mean size of <25 μm with an angle of repose values between 25.8-36.6°. Pullulan markedly extended drug-release time to >180 min, ~9 times greater than the duration (i.e., 20 min) reportedly achieved by chitosan. Kinetic analysis showed the drug-release rate was concentration dependent and jointly controlled by drug diffusion and polymer chain relaxation. Further, pullulan was mucoadhesive and was able to retain up to 78.8% w/w of microencapsulated gold nanoparticle probes at the mucosal membrane. These data strongly suggest that BZH-pullulan microparticles have great potential for oromucosal drug delivery, by providing elongated residence time in situ and sustained drug release for the treatment of local diseases.

The Potential of Films as Transmucosal Drug Delivery Systems

Pharmaceutical films are polymeric formulations used as a delivery platform for administration of small and macromolecular drugs for local or systemic action. They can be produced by using synthetic, semi-synthetic, or natural polymers through solvent casting, electrospinning, hot-melt extrusion, and 3D printing methods, and depending on the components and the manufacturing methods used, the films allow the modulation of drug release. Moreover, they have advantages that have drawn interest in the development and evaluation of film application on the buccal, nasal, vaginal, and ocular mucosa. This review aims to provide an overview of and critically discuss the use of films as transmucosal drug delivery systems. For this, aspects such as the composition of these formulations, the theories of mucoadhesion, and the methods of production were deeply considered, and an analysis of the main transmucosal pathways for which there are examples of developed films was conducted. All of this allowed us to point out the most relevant characteristics and opportunities that deserve to be taken into account in the use of films as transmucosal drug delivery systems.

Oral disintegration films: applications and production methods

The use of orally disintegrating films (ODF) as a vehicle for the release of active compounds has drawn attention due to the advantages such as ease of swallowing, precise dosage, low thickness, flexibility, greater comfort and acceptability by the patient in relation to oral tablets, for do not require water for administration, it is ideal for people with difficulty in swallowing. In this review, recent advances in ODFs, their applications and production methods will be presented. The production of ODFs uses polymers, plasticizers and active compounds. Among the compounds added to the film that can affect its properties, the polymer used has a strong influence on the disintegration time and on the controlled release of active principles. Polymers used for the production of oral films must be non-toxic, have good wettability and spreadability, and may be of synthetic or natural origin. Regarding the methods used in the production of ODFs, those currently used are solvent evaporation and hot extrusion. However, one of the great challenges for the production of oral films is the scale up, from laboratory to industrial scale, as factors such as heating, mixing speed and temperatures can lead to changes in film quality. Recently, ODFs have been developed as carriers of natural compounds such as vitamins, phenolic compounds, antioxidant and antimicrobial activity. Thus, it was found that orally disintegrating films are an alternative for the release of active compounds, different from those already existing, which justifies the growing interest in this type of film.

In Vitro and In Vivo Evaluation of Composite Oral Fast Disintegrating Film: An Innovative Strategy for the Codelivery of Ranitidine HCl and Flurbiprofen

Here, we evaluate the feasibility of co-loading plain ranitidine hydrochloride (RHCl) and microencapsulated flurbiprofen (FBP) in a Lycoat^® RS780-based oral fast disintegrating film (ODF). These films were developed by the solvent casting method to minimize the adverse effects of FBP and reduce the dosage form burden on patients. Optimized FBP microparticles (M3) with an average size of 21.2 ± 9.2 µm were loaded alone (F1) and in combination with plain RHCl (F2) in the composite ODF. All films were evaluated physicomechanically and physicochemically. These films were resilient, flexible, and disintegrated within thirty seconds. SEM images showed intact FBP microparticles in both formulations and, moreover, did not observe an interaction between the drug and film components. Microencapsulated FBP was released in a controlled manner over 48 h from the proposed formulations, while RHCl was released within 5 min from F2. After in vitro evaluation, formulations were also tested for in vivo anti-inflammatory activity, cytokine (TNF-α and IL-6) levels, and gastroprotective effects in rats. The anti-inflammatory activity and gastroprotective effect of F2 were markedly higher than pure FBP and other synthesized formulations (M3 and F1). The average score of gastric lesions was in the order of pure FBP (15.5 ± 1.32) > M3 (8 ± 2) > F1 (1 ± 0.5) > F2 (0.5 ± 0) > control (0). Additionally, F2 showed a sustained anti-inflammatory effect up to 10 h in the rat paw edema model. Furthermore, F2 also markedly reduced TNF-α and IL-6 levels. Conclusively, the Lycoat^® RS780-based composite film could be a promising carrier for the co-loading of microencapsulated FBP with RHCl. In the future, an optimized formulation (F2) could be capable of countering the issues related to multiple drug administration in geriatric patients and evading the gastric irritation associated with FBP.

Development and Characterization of Pullulan-Based Orodispersible Films of Iron

Iron deficiency is the principal cause of nutritional anemia and it constitutes a major health problem, especially during pregnancy. Despite the availability of various non-invasive traditional oral dosage forms such as tablets, capsules, and liquid preparations of iron, they are hard to consume for special populations such as pregnant women, pediatric, and geriatric patients with dysphagia and vomiting tendency. The objective of the present study was to develop and characterize pullulan-based iron-loaded orodispersible films (i-ODFs). Microparticles of iron were formulated by a microencapsulation technique, to mask the bitter taste of iron, and ODFs were fabricated by a modified solvent casting method. Morphological characteristics of the microparticles were identified by optical microscopy and the percentage of iron loading was evaluated by inductively coupled plasma optical emission spectroscopy (ICP-OES). The fabricated i-ODFs were evaluated for their morphology by scanning electron microscopy. Other parameters including thickness, folding endurance, tensile strength, weight variation, disintegration time, percentage moisture loss, surface pH, and in vivo animal safety were evaluated. Lastly, stability studies were carried out at a temperature of 25 °C/60% RH. The results of the study confirmed that pullulan-based i-ODFs had good physicochemical properties, excellent disintegration time, and optimal stability at specified storage conditions. Most importantly, the i-ODFs were free from irritation when administered to the tongue as confirmed by the hamster cheek pouch model and surface pH determination. Collectively, the present study suggests that the film-forming agent, pullulan, could be successfully employed on a lab scale to formulate orodispersible films of iron. In addition, i-ODFs can be processed easily on a large scale for commercial use.

Development of Optimized Sumatriptan-Prochlorperazine Combined Orodispersible Films Without Disintegrant: in vitro, ex vivo and in vivo Characterization

Sumatriptan succinate and prochlorperazine maleate are a clinically proven combination for treating migraine and associated nausea and vomiting. Classical oral dosage forms are not frequently workable in migraine because of the associated nausea/vomiting, and no effective fixed dose combination is available. Thus, the aim of the study was to optimize a combined sumatriptan-prochlorperazine orodispersible film for rapid release of drugs. Orodispersible films were prepared by solvent casting method using varied amounts of polyvinyl alcohol and glycerol as film former and plasticizer, respectively, along with fixed levels of other ingredients employing central composite design. The optimum film (VF) demonstrated disintegration and total dispersion times as 21 s and 2.3 min, respectively. Tensile strength and Young's modulus were 8.86 ± 0.37 MPa and 24.15 ± 0.07 MPa, respectively. The in vitro T80% of both drugs from the ODF was achieved within 4 min. The film was palatable and disintegrated in 2 min in buccal cavity of human volunteers. Permeation study through goat mucosa demonstrated 100% permeation of both drugs within 15 min. X-Ray diffraction and differential scanning calorimetry supported drugs being amorphous and Fourier transform infrared demonstrated drug-excipient compatibility in optimized film. A judicious combination of sumatriptan succinate and prochlorperazine maleate could be prepared in orodispersible films for the possible relief of migraine.

Development and Characterizations of Pullulan and Maltodextrin-Based Oral Fast-Dissolving Films Employing a Box-Behnken Experimental Design

Migraine is a neurological disorder characterized by severe headaches, visual aversions, auditory, and olfactory disorders, accompanied by nausea and vomiting. Zolmitriptan (ZMT^®) is a potent 5HT1B/1D serotonin receptor agonist frequently used for the treatment of migraine. It has erratic absorption from the gastrointestinal tract (GIT), but its oral bioavailability is low (40-45%) due to the hepatic metabolism. This makes it an ideal candidate for oral fast dissolving formulations. Hence, the current study was undertaken to design and develop oral fast-dissolving films (OFDFs) containing ZMT for migraine treatment. The OFDFs were formulated by the solvent casting method (SCM) using Pullulan (PU) and maltodextrin (MDX) as film-forming agents and propylene glycol (PG) as a plasticizer. The strategy was designed using Box-Behnken experimental design considering the proportion of PU:MDX and percentage of PG as independent variables. The effectiveness of the OFDF's was measured based on the following responses: drug release at five min, disintegration time (D-time), and tensile strength (TS). The influence of formulation factors, including percent elongation (%E), thickness, water content, moisture absorption, and folding endurance on ZMT-OFDFs, were also studied. The results showed a successful fabrication of stable ZMT-OFDFs, with surface uniformity and amorphous shape of ZMT in fabricated films. The optimized formulation showed a remarkable rapid dissolution, over 90% within the first 5 min, a fast D-time of 18 s, and excellent mechanical characteristics. Improved maximum plasma concentration (C max) and area under the curve (AUC 0-t) in animals (rats) treated with ZMT-OFDFs compared to those treated with an intra-gastric (i-g) suspension of ZMT were also observed. Copolymer OFDFs with ZMT is an exciting proposition with great potential for the treatment of migraine headache. This study offers a promising strategy for developing ZMT-OFDFs using SCM. ZMT-OFDFs showed remarkable rapid dissolution and fast D-time, which might endeavor ZMT-OFDFs as an auspicious alternative approach to improve patient compliance and shorten the onset time of ZMT in migraine treatment.

Multilayered mucoadhesive hydrogel films based on Ocimum basilicum seed mucilage/thiolated alginate/dopamine-modified hyaluronic acid and PDA coating for sublingual administration of nystatin

The present study establishes an experimental design for the preparation of new bi and tri-layer mucoadhesive sublingual films based on basil (Ocimum basilicum L.) seed mucilage (OBM) as novel plant-polysaccharide for oromucosal administration of nystatin (Nys). The films formulation consists of a drug reservoir-mucoadhesive layer cross-linked via CaCl₂, with protective mucoadhesive layers based on thiolated alginate (TA) and polydopamine (PDA). OBM served as a new mucoadhesive polysaccharide in second layers, where the dopamine-modified-hyaluronic acid (DHA) improved the mucoadhesive strength and swelling rate properties. The drug-loaded formulations of trilayer film with PDA coating, and bilayer film with DHA/OBM (1:1) in the second layer, showed the desired mucoadhesion properties (about 69 and 75.3% respectively). The obtained results revealed that the bilayer film containing DHA had a superior swelling degree in the range of 15-19 (g/g). While the PDA coating sample showed the highest resistance to water uptake and erosion. The bilayer film (DHA/OBM with 1:1 ratio) provided a maximum drug release of 86% after 4 h. The selected formulations indicated good mechanical properties with no cytotoxicity.

Pullulan film incorporated with nanocapsules improves pomegranate seed oil anti-inflammatory and antioxidant effects in the treatment of atopic dermatitis in mice

This study aimed to prepare pullulan films containing pomegranate seeds oil (PSO) based nanocapsules, and evaluate the formulation efficacy in the treatment of atopic dermatitis (AD)-like lesions induced by 2,4-dinitrochlorobenzene (DNCB). The Eudragit RS 100® nanocapsules (PSONC) were prepared by the interfacial precipitation of preformed polymer, whereas the films were produced by the solvent casting method. Pomegranate seed oil nanoemulsions (PSONE) were prepared by the spontaneous emulsification method for comparative reasons. Both nanosystems presented adequate mean diameter (248 ± 16 nm for PSONE and 181 ± 6 nm for PSONC), polydispersity index (below 0.2), zeta potential (-25.63 ± 1.1 mV for PSONE and + 43.13 ± 0.7 mV for PSONC) and pH in the acid range (6.77 ± 0.27 and 5.31 ± 0.17, PSONE and PSONC). By a pre-formulation study, sorbitol (6.5%) and PEG 400 (1.5%) were considered the most suitable plasticizers for developing pullulan films (6%) intending topical application. In general, pullulan films were classified as flexible and hydrophilic, with high occlusive properties, 57.6 ± 0.8%, 64.6 ± 0.8% for vehicle, PSONCF (pullulan film containing PSONC), respectively. All formulations (films and nanocarriers) presented no irritant potential in the chorioallantoic membrane test. In the in vivo model, the treatments with free PSO and PSONCF attenuated the skin injury as well as the mechanical hypernociceptive behavioral induced by DNCB exposure to mice. Importantly, the biochemical analyses provided evidence that only the treatment with PSONCF modulated the inflammatory and the oxidative stress parameters evaluated in this study. In conclusion, these data lead us to believe that PSONC incorporation into a pullulan film matrix improved the biological properties of the PSO in this AD-model.

Orodispersible films: Conception to quality by design

Orodispersible films (ODFs) are ultra-thin, stamp-sized, elegant, portable and patient-centric pharmaceutical dosage forms that do not need water to be ingested. They are particularly useful for paediatric and geriatric patient populations with special needs such as dysphagia, Parkinson's disease, and oral cancer. Accordingly, they hold tremendous potential in gaining patient compliance, convenience and pharmacotherapy. In the present review, conception and evolution of ODFs as a product and its technology are discussed. The review continues by providing overview about the potential of ODFs as carriers for delivering drugs, herbal extracts, probiotics and vaccines. Besides, strategies employed in drug cargo loading, taste masking of bitter drugs and enhancing drug stability are discussed. Finally, the review concludes by providing a brief overview about quality by design (QbD) principles in development of ODFs.

Utilising Co-Axial Electrospinning as a Taste-Masking Technology for Paediatric Drug Delivery

The present study describes the use of two taste-masking polymers to fabricate a formulation of chlorpheniramine maleate for paediatric administration. Co-axial electrospinning was utilized to create layered nanofibres; the two polymers, Eudragit® E PO and Kollicoat® Smartseal, were alternated between the core and the shell of the system in order to identify the optimum taste-masked formulation. The drug was loaded in the core on all occasions. It was found that the formulation with Kollicoat® Smartseal in the core with the drug, and Eudragit® E PO in the shell showed the most effective taste-masking compared to the other formulations. These fibres were in the nano-range and had smooth morphology as verified by scanning electron microscopy. Solid-state characterization and thermal analysis confirmed that amorphous solid dispersions were formed upon electrospinning. The Insent E-tongue was used to assess the taste-masking efficiency of the samples, and it was found that this formulation was undetectable by the bitter sensor, indicating successful taste-masking compared to the raw version of the drug. The E-tongue also confirmed the drug's bitterness threshold as compared to quinine HCl dihydrate, a parameter that is useful for formulation design and taste-masking planning.

Optimization of taste-masked dapoxetine oral thin films using factorial design: in vitro and in vivo evaluation

Dapoxetine HCl is used for the treatment of premature ejaculation. Dapoxetine is primarily metabolized in the liver and kidney and its metabolites are inactive; resulting in reduced bioavailability. Also, one of the commonly encountered issues in the oral dapoxetine formulae is its bitter taste. Thus, the objective of this study was to develop and to optimize novel dapoxetine taste-masked oral thin films (OTFs), to offer a faster dissolution rate, rapid release pattern, lower liver metabolism, and better patient compliance. To achieve our goal, the applicability of either pullulan or maltodextrin as strip forming polymers were investigated in the preparation of (OTFs), while glycerol was used as a plasticizer. Also, the physicochemical characteristics of dapoxetine in a resinate complex with AmberLite^TM -IRP69 as taste masking were evaluated. Furthermore, a 2³ factorial design was used to study and to optimize the effect of the independent variables (strip forming polymer (X₁), glycerol (X₂) and AmberLite^TM (X₃) amounts) on the disintegration time (Y₁), degree of elongation (Y₂), and degree of in vitro drug release in phosphate buffer pH 6.8 at 5 minutes (Q5min, Y₃) as responses. P2 batch (OTF) (pullulan 96 mg, glycerol 12 mg, AmberLite^TM 32 mg, and dapoxetine 30 mg) was identified as an optimized formulation showing an in vitro disintegration time 9.33 s, 35.56% elongation, and 91.43% Q5min; excellent in vivo disintegration time; good overall taste acceptability and stable resinate complex.

Pressure-assisted microsyringe 3D printing of oral films based on pullulan and hydroxypropyl methylcellulose

Oral films (OFs) continue to attract attention as drug delivery systems, particularly for pedatric and geriatric needs. However, immiscibility between different polymers limits the full potential of OFs from being explored. One example is pullulan (PUL), a novel biopolymer which often has to be blended with other polymers to reduce cost and alter its mechanical properties. In this study, the state-of-the-art in fabrication techniques, three-dimensional (3D) printing was used to produce hybrid film structures of PUL and hydroxypropyl methylcellulose (HPMC), which were loaded with caffeine as a model drug. 3D printing was used to control the spatial deposition of films. HPMC was found to increase the mean mechanical properties of PUL films, where the tensile strength, elastic modulus and elongation break increased from 8.9 to 14.5 MPa, 1.17 to 1.56 GPa and from 1.48% to 1.77%, respectively. In addition, the spatial orientation of the hybrid films was also explored to determine which orientation could maximize the mechanical properties of the hybrid films. The results revealed that 3D printing could modify the mechanical properties of PUL whilst circumventing the issues associated with immiscibility.

Effect of solvents and cellulosic polymers on quality attributes of films loaded with a poorly water-soluble drug

The combined effect of solvent, cellulosic polymer, and a poorly water-soluble drug, fenofibrate (FNB) on solution-cast pharmaceutical film quality attributes, e.g., morphology, drug recrystallization, content uniformity, mechanical properties, dissolution rate and supersaturation level, was investigated. Film morphology, content uniformity, and mechanical properties were impacted by the extent of FNB recrystallization which was strongly affected by FNB solubility in the solvent as compared to the polymer type, hydroxypropyl methylcellulose or hydroxypropyl cellulose. FNB recrystallization affected drug dissolution rates and supersaturation under non-sink conditions. Specifically, the area under the curve linearly correlated with recrystallization. After one-year storage, FNB recrystallization reached very high levels even for the films with no initial recrystallization, suggesting low initial crystallinity does not guarantee stability. Thus, uncontrolled recrystallization and poor time-stability would be unavoidable for solution-cast films. Overall, both the polymer and the solvent strongly impact drug recrystallization, film structure, mechanical properties, dissolution rate, and supersaturation.

Advanced flow cell design for in vitro release testing of mucoadhesive buccal films

Films for buccal application are a slowly emerging new platform for drug delivery. There remains a lack of analytical techniques for the determination of in vitro active pharmaceutical ingredient release. The aim here was to develop an alternative method to the commonly used United States Pharmacopoeia (USP) 2 method, based on the flow-through cell. This system extends the release time and enables more detailed sample discrimination according to formulation. It could be used as a tool for in vivo prediction of drug release rates from buccal film formulations. The flow cell contains two chambers separated by a membrane through which the released active pharmaceutical ingredient is measured. Vital system variables and their effects on the release rate of the model active pharmaceutical ingredient are presented for formulations based on sodium alginate polymer. The method reflects the differences between films and is shown to be discriminatory for evaluation of buccal formulations.

Derivatization approaches and applications of pullulan

Pullulan (PUL), a linear exo-polysaccharide, is useful in industries as diverse as food, cosmetics and pharmaceuticals. PUL presents many favorable characteristics, such as renewable origin, biocompatibility, stability, hydrophilic nature, and availability of reactive sites for chemical modification. With an inherent affinity to asialoglycoprotein receptors, PUL can be used for targeted drug delivery to the liver. Besides, these primary properties have been combined with modern synthetic approaches for developing multifunctional biomaterials. This is evident from numerous studies on approaches, such as hydrophobic modification, cross-linking, grafting and transformation as a polyelectrolyte. In this review, we have discussed up-to-date advances on chemical modifications and emerging applications of PUL in targeted theranostics and tissue engineering. Besides, we offer an overview of its applications in food, cosmetics and environment remediation.

Effect of drug-ion exchange resin complex in betahistine hydrochloride orodispersible film on sustained release, taste masking and hygroscopicity reduction

Orodispersible film (ODF) is a widely used oral solid dosage form. However, it's not suitable for drugs with short half-life, bitterness and strong hygroscopicity. The present study aims to develop a sustained release and stable betahistine hydrochloride ODF without bitterness. Drug-resin complex (IRDC) was prepared using batch method. In vitro dissolution experiment, e-Tongue and hygroscopicity experiment were conducted to compare the differences between ODF containing IRDC and ODF containing betahistine hydrochloride. Drug release kinetics showed that the diffusion of drug in IRDC was the rate-limiting step of drug release. DSC and FT-IR were conducted to explore the molecular mechanism of taste masking and hygroscopicity reduction. It turned out that taste masking was attributed to the ionic interaction between drug and resin and the slow dissolution of drug from IRDC. The site where drug form hydrogen bonds with water molecular was occupied by drug-resin interaction leading to hygroscopicity reduction. In summary, in this study we not only developed a betahistine hydrochloride ODF with good properties but also explored the effect of drug-resin interaction on sustained release, taste masking and hygroscopicity reduction.