Ultrasensitive electrochemical immunosensing of tumor suppressor protein p53 in unprocessed human plasma and cell lysates using a novel nanocomposite based on poly-cysteine/graphene quantum dots/gold nanoparticle

Scientific Insights into the Quantum Dots (QDs)-Based Electrochemical Sensors for State-of-the-Art Applications

Size-dependent optical and electronic properties are unique characteristics of quantum dots (QDs). A significant advantage is the quantum confinement effect that allows their precise tuning to achieve required characteristics and behavior for the targeted applications. Regarding the aforementioned factors, QDs-based sensors have exhibited dramatic potential for the diverse and advanced applications. For example, QDs-based devices have been potentially utilized for bioimaging, drug delivery, cancer therapy, and environmental remediation. In recent years, use of QDs-based electrochemical sensors have been further extended in other areas like gas sensing, metal ion detection, monitoring of organic pollutants, and detection of radioactive isotopes. Objective of this study is to rationalize the QDs-based electrochemical sensors for state-of-the-art applications. This review article comprehensively illustrates the importance of aforementioned devices along with sources from which QDs devices have been formulated and fabricated. Other distinct features of QDs devices are associated with their extremely high active surfaces, inherent ability of reproducibility, sensitivity, and selectivity for the targeted analyte detection. In this review, major categories of QD materials along with justification of their key roles in electrochemical devices have been demonstrated and discussed. All categories have been evaluated with special emphasis on the advantages and drawbacks/challenges associated with QD materials. However, in the interests of readers and researchers, recent improvements also have been included and discussed. On the evaluation, it has been concluded that despite significant challenges, QDs-based electrochemical sensors exhibit excellent performances for state-of-the-art and targeted applications.

A novel biosensing strategy for identification of three important bacteria causing meningitis

Bacterial meningitis is an acute infection which requires rapid diagnosis and treatment due to the high mortality and serious consequences of the disease. The purpose of this study was to design a homemade multiplex PCR and a novel fluorescence biosensor on chip (FBC) to detect three important agents of meningitis including Streptococcus pneumoniae (S. pneumoniae), Neisseria meningitidis (N. meningitidis), and Haemophilus influenzae (H. influenzae). The homemade multiplex PCR can diagnose three bacterial species simultaneously. Fabrication of FBC was carried out based on the deposition of lead nanoparticles on a quartz slide using the thermal evaporation method. Then, the SH-Cap Probe/Target ssDNA /FAM-Rep probe was loaded on lead film. The evaluation of the fluorescence reaction when the probes bind to the target ssDNA was assessed by a Cytation 5 Cell Imaging Multimode Reader Bio-Tek. The limit of detections (LOD) in homemade PCR and FBC to identify S. pneumoniae were 119 × 102 CFU/mL (0.27 ng/μL) and 380 CFU/mL (9 pg/μL), respectively. The LODs of homemade PCR and FBC for detection of N. meningitidis were 4.49 CFU/mL (1.1 pg/μL) and 13 × 103 CFU/mL (30 pg/μL), respectively. Our results confirmed the LODs of homemade PCR and FBC in detection of H. influenzae were 15.1 CFU/mL (30 fg/μL) and 41 × 102 CFU/mL (90 pg/ μL), respectively. Both techniques had appropriate sensitivity and specificity in detection of S. pneumoniae, N. meningitidis and H. influenzae.

Tumor diagnosis using carbon-based quantum dots: Detection based on the hallmarks of cancer

Carbon-based quantum dots (CQDs) have been shown to have promising application value in tumor diagnosis. Their use, however, is severely hindered by the complicated nature of the nanostructures in the CQDs. Furthermore, it seems impossible to formulate the mechanisms involved using the inadequate theoretical frameworks that are currently available for CQDs. In this review, we re-consider the structure-property relationships of CQDs and summarize the current state of development of CQDs-based tumor diagnosis based on biological theories that are fully developed. The advantages and deficiencies of recent research on CQDs-based tumor diagnosis are thus explained in terms of the manifestation of nine essential changes in cell physiology. This review makes significant progress in addressing related problems encountered with other nanomaterials.

Electrochemical and Photoelectrochemical Immunosensors for the Detection of Ovarian Cancer Biomarkers

Photoelectrochemical (PEC) sensing is an emerging technological innovation for monitoring small substances/molecules in biological or non-biological systems. In particular, there has been a surge of interest in developing PEC devices for determining molecules of clinical significance. This is especially the case for molecules that are markers for serious and deadly medical conditions. The increased interest in PEC sensors to monitor such biomarkers can be attributed to the many apparent advantages of the PEC system, including an enhanced measurable signal, high potential for miniaturization, rapid testing, and low cost, amongst others. The growing number of published research reports on the subject calls for a comprehensive review of the various findings. This article is a review of studies on electrochemical (EC) and PEC sensors for ovarian cancer biomarkers in the last seven years (2016-2022). EC sensors were included because PEC is an improved EC; and a comparison of both systems has, expectedly, been carried out in many studies. Specific attention was given to the different markers of ovarian cancer and the EC/PEC sensing platforms developed for their detection/quantification. Relevant articles were sourced from the following databases: Scopus, PubMed Central, Web of Science, Science Direct, Academic Search Complete, EBSCO, CORE, Directory of open Access Journals (DOAJ), Public Library of Science (PLOS), BioMed Central (BMC), Semantic Scholar, Research Gate, SciELO, Wiley Online Library, Elsevier and SpringerLink.

An electrochemical sensor for direct and sensitive detection of ketamine

Ketamine is an organic drug with weak electrochemical activity, which makes it difficult to directly detect by electrochemical methods. Herein, an electrochemical sensor, with excellent detection sensitivity, is proposed for direct detection of ketamine based on a weakly conductive poly-L-cysteine molecularly imprinted membrane. Poly-L-cysteine molecularly imprinted membrane sensor (poly-L-Cys-KT-MIM/GCE) is obtained using L-cysteine as a functional monomer and ketamine as a template molecule based on electropolymerization. The green and highly active cysteine is selected as a functional monomer during electropolymerization, which cannot only achieve specific recognition but also improve detection sensitivity. Furthermore, the oxidation mechanism and fingerprint of ketamine on the electrode surface are established by analyzing the corresponding oxidation products using high/resolution mass spectrometry, which will help to promote the application of electrochemistry in the rapid detection of drugs. Under optimal conditions, the as-designed sensor demonstrated a linear response to ketamine within the range of 5.0 × 10^-7 to 2.0 × 10^-5 mol L^-1 and a detection limit of 1.6 × 10^-7 mol L^-1. The proposed method exhibited excellent performance from the viewpoints of selectivity, sensitivity and stability. Notably, the sensor rendered excellent reliability and could be used for the detection of target analytes in hair and urine samples with high recovery rates.

Self-assembled monolayer-assisted label-free electrochemical genosensor for specific point-of-care determination of Haemophilus influenzae

For sensitive detection of the L-fuculokinase genome related to the Haemophilus influenzae (H. influenzae), this research work demonstrates the label-free electrochemical-based oligonucleotide genosensing assay relying on the performing hybridization process. To enhance the electrochemical responses, multiple electrochemical modifier-tagged agents were effectively utilized. For attaining this goal, NiCr-layered double hydroxide (NiCr LDH) has been synthesized and combined with biochar (BC) to create an efficient electrochemical signal amplifier that has been immobilized on the surface of the bare Au electrode. Low detection and quantification limits (LOD and LOQ) associated with the designed genosensing bio-platform to detect L-fuculokinase have been achieved to 6.14 fM and 11 fM, respectively. Moreover, the wide linear range of 0.1 to 1000 pM demonstrates the capability of the designed platform. Investigated were the 1-, 2-, and 3-base mismatched sequences, and the negative control samples clarified the high selectivity and better performance of the engineered assay. The values of 96.6-104% and 2.3-3.4% have been obtained for the recoveries and RSDs, respectively. Furthermore, the repeatability and reproducibility of the associated bio-assay have been studied. Consequently, the novel method is appropriate for rapidly and quantitatively detecting H. influenzae, and is considered a better candidate for advanced tests on biological samples such as urine samples.

Nanotechnology‐based electrochemical biosensors for monitoring breast cancer biomarkers

Breast cancer is categorized as the most widespread cancer type among women globally. On-time diagnosis can decrease the mortality rate by making the right decision in the therapy procedure. These features lead to a reduction in medication time and socioeconomic burden. The current review article provides a comprehensive assessment for breast cancer diagnosis using nanomaterials and related technologies. Growing use of the nano/biotechnology domain in terms of electrochemical nanobiosensor designing was discussed in detail. In this regard, recent advances in nanomaterial applied for amplified biosensing methodologies were assessed for breast cancer diagnosis by focusing on the advantages and disadvantages of these approaches. We also monitored designing methods, advantages, and the necessity of suitable (nano) materials from a statistical standpoint. The main objective of this review is to classify the applicable biosensors based on breast cancer biomarkers. With numerous nano-sized platforms published for breast cancer diagnosis, this review tried to collect the most suitable methodologies for detecting biomarkers and certain breast cancer cell types.

Hybrid Nanobioengineered Nanomaterial-Based Electrochemical Biosensors

Nanoengineering biosensors have become more precise and sophisticated, raising the demand for highly sensitive architectures to monitor target analytes at extremely low concentrations often required, for example, for biomedical applications. We review recent advances in functional nanomaterials, mainly based on novel organic-inorganic hybrids with enhanced electro-physicochemical properties toward fulfilling this need. In this context, this review classifies some recently engineered organic-inorganic metallic-, silicon-, carbonaceous-, and polymeric-nanomaterials and describes their structural properties and features when incorporated into biosensing systems. It further shows the latest advances in ultrasensitive electrochemical biosensors engineered from such innovative nanomaterials highlighting their advantages concerning the concomitant constituents acting alone, fulfilling the gap from other reviews in the literature. Finally, it mentioned the limitations and opportunities of hybrid nanomaterials from the point of view of current nanotechnology and future considerations for advancing their use in enhanced electrochemical platforms.

Smart Biosensors for Cancer Diagnosis Based on Graphene Quantum Dots

The timely diagnosis of cancer represents the best chance to increase treatment success and to reduce cancer deaths. Nanomaterials-based biosensors containing graphene quantum dots (GQDs) as a sensing platform show great promise in the early and sensitive detection of cancer biomarkers, due to their unique chemical and physical properties, large surface area and ease of functionalization with different biomolecules able to recognize relevant cancer biomarkers. In this review, we report different advanced strategies for the synthesis and functionalization of GQDs with different agents able to selectively recognize and convert into a signal specific cancer biomarkers such as antigens, enzymes, hormones, proteins, cancer related byproducts, biomolecules exposed on the surface of cancer cells and changes in pH. The developed optical, electrochemical and chemiluminescent biosensors based on GQDs have been shown to ensure the effective diagnosis of several cancer diseases as well as the possibility to evaluate the effectiveness of anticancer therapy. The wide linear range of detection and low detection limits recorded for most of the reported biosensors highlight their great potential in clinics for the diagnosis and management of cancer.

Trends in targeted delivery of nanomaterials in colon cancer diagnosis and treatment

Colon cancer is an adenocarcinoma, which subsequently develops into malignant tumors, if not treated properly. The current colon cancer therapy mainly revolves around chemotherapy, radiotherapy and surgery, but the search continues for more effective interventions. With the advancement of nanoparticles (NPs), it is now possible to diagnose and treat colon cancers with different types, shapes, and sizes of NPs. Nanoformulations such as quantum dots, iron oxide, polymeric NPs, dendrimers, polypeptides, gold NPs, silver NPs, platinum NPs, and cerium oxide have been either extensively used alone or in combination with other nanomaterials or drugs in colon cancer diagnosis, and treatments. These nanoformulations possess high biocompatibility and bioavailability, which makes them the most suitable candidates for cancer treatment. The size and shape of NPs are critical to achieving an effective drug delivery in cancer treatment and diagnosis. Most NPs currently are under different testing phases (in vitro, preclinical, and clinical), whereas some of them have been approved for therapeutic applications. We have comprehensively reviewed the recent advances in the applications of NPs-based formulations in colon cancer diagnosis and treatment.

Electrochemical biosensors for measurement of colorectal cancer biomarkers

Colorectal cancer (CRC) is associated with one of the highest rates of mortality among cancers worldwide. The early detection and management of CRC is imperative. Biomarkers play an important role in CRC screening tests, CRC treatment, and prognosis and clinical management; thus rapid and sensitive detection of biomarkers is helpful for early detection of CRC. In recent years, electrochemical biosensors for detecting CRC biomarkers have been widely investigated. In this review, different electrochemical detection methods for CRC biomarkers including immunosensors, aptasensors, and genosensors are summarized. Further, representative examples are provided that demonstrate the advantages of electrochemical sensors modified by various nanomaterials. Finally, the limitations and prospects of biomarkers and electrochemical sensors in detection are also discussed. Graphical abstract.

Current and Prospective of Breast Cancer Biomarkers

Biomarkers have shown great promise over the past decade the process of drug development more effective and have become an integral part of diagnosis of diseases. Biosensors were integrated with biomarker detection and point-of-care detection for signal amplification, high specificity and sensitivity, rapid response time, low cost, simplicity and multi-analytical testing. In order to detect more sensitively, these particular biomarkers have been explored with the possibility of real-time measurements in order to develop simple and compact systems which can analyze complex specimens. Various biosensors including electrochemical biosensors have recently been developed based on disease-specific biomarkers in the diagnosis of cancer disease. The main objective of the book chapter is to review research with new materials/methods in electrochemical biosensing techniques to detection of breast cancer biomarkers and evaluating latest techniques for detection of important analytes in real samples. In this book chapter, the recent development of electrochemical biosensors of breast cancer biomarkers will be reviewed. Furthermore, recent and future trend application of breast cancer biomarkers will be discussed.

A critical review on quantum dots: From synthesis toward applications in electrochemical biosensors for determination of disease-related biomolecules

Fluorescent quantum dots (QDs), defined by a diameter size of <10 nm, have been the core concept of nanoscience and nanotechnology since their inception. QDs possess many unique structural, electrochemical and photochemical properties that render them a promising platform for sensing applications. These nanomaterials can greatly enhance the analytical performances of biosensors, namely detection limit, sensitivity and selectivity. QDs are being developed not only because of their ability for signal enhancement but also because of their high capacity for fuctionalization with bioreceptors. In this review, we summarize a basic knowledge of QDs before focusing on their application to sensing thus far followed by a discussion of future directions for research into the sensing field. Due to the nature of QDs, especially their ability to combine nanotechnology and biotechnology, they possess the potential to open a novel paradigm on early diagnosis of diseases using the electrochemical biosensors. Therefore, we try to give a comprehensive view of the role of these zero-dimensional (0D) nanomaterials in the designing electrochemical sensors for determination of disease-related biomolecules, including tumor markers, inflammatory biomarkers, depression markers and archetypal biomarker in diabetes diagnosis. Considering the high potential of QDs for the electrochemistry-based biosensing strategies, the authors suggest that more research is needed on understanding their electronic properties and why synthesis and surface modification methods can affect these properties.

Determination of p53 biomarker using an electrochemical immunoassay based on layer-by-layer films with NiFe2O4 nanoparticles

A disposable electrochemical immunosensors is presented suitable to detect cancer biomarker p53 using screen-printed carbon electrodes modified with a layer-by-layer (LbL) matrix of carboxylated NiFe₂O₄ nanoparticles and polyethyleneimine, onto which anti-p53 antibodies were adsorbed. Under optimized conditions, the immunosensors exhibited high surface coverage and high concentration of immobilized antibodies, which allowed for detection of p53 in a wide dynamic range from 1.0 to 10 × 10³ pg mL^-1, with a limit of detection of 5.0 fg mL^-1 at a working potential of 100 mV vs. Ag/AgCl. The immunosensors also exhibited good selectivity with negligible interference upon incubation in complex matrices containing high concentrations of proteins (i.e., fetal bovine serum and cell lysate). The immunosensor performance is among the best reported in the literature for determination of p53, with the additional advantage of being disposable and operating with low-volume solutions.Graphical abstract Schematic representation of immunosensor fabrication depicting the immobilization of specific antibodies against p53 protein onto the surfaces of disposable printed electrodes modified with films of polyethyleneimine and different concentrations of carboxylated magnetic nanoparticles.

A novel signal amplification strategy electrochemical immunosensor for ultra-sensitive determination of p53 protein

In this work, we fabricated a novel sandwich-type electrochemical immunosensor for quantitative and ultra-sensitive determination of tumor suppressor protein p53 by signal amplification strategy. Conductive polymers poly (3, 4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS) has significantly effect on enhancing charge transfer and markedly increases the sensitivity of electrochemical immunosensing. Gold nanoparticles (AuNPs) as high conductivity nanocarriers were also used to capture monoclonal antibodies (Ab₁) due to their large specific surface areas. In addition, pH responsive zeolitic imidazolate framework (ZIF-8) was used to load the redox probe 2, 3-diaminophenazine (DAP) and the secondary antibodies (Ab₂) to form a sensitive-type ZIF-8-DAP-Ab₂ immunoprobe. After the sandwich-type immunoassay with the free p53 protein, with the release of probe DAP after the electrochemical signal amplificated by PEDOT:PSS and AuNPs, the ultra-sensitive and quantitative determination of p53 protein was realized with working range of 1-120 ng mL^-1 and low detection limit of 0.09 ng mL^-1. Besides, the fabricated electrochemical immunosensor exhibited good recovery, high sensitivity, reliability, and selectivity.

Biosensing of microcystins in water samples; recent advances

Safety and quality of water are significant matters for agriculture, animals and human health. Microcystins, as secondary metabolite of cyanobacteria (blue-green algae) and cyclic heptapeptide cyanotoxin, are one of the main marine toxins in continental aquatic ecosystems. More than 100 microcystins have been identified, of which MC-LR is the most important type due to its high toxicity and common detection in the environment. Climate change is an impressive factor with effects on cyanobacterial blooms as source of microcystins. The presence of this cyanotoxin in freshwater, drinking water, water reservoir supplies and food (vegetable, fish and shellfish) has created a common phenomenon in eutrophic freshwater ecosystems worldwide. International public health organizations have categorized microcystins as a kind of neurotoxin and carcinogen. There are several conventional methods for detection of microcystins. The limitations of traditional methods have encouraged the development of innovative methods for detection of microcystins. In recent years, the developed sensor techniques, with advantages, such as accuracy, reproducibility, portability and low cost, have attracted considerable attention. This review compares the well-known of biosensor types for detection of microcystins with a summary of their analytical performance.

Modification-free amperometric biosensor for the detection of wild-type p53 protein based on the in situ formation of silver nanoparticle networks for signal amplification

Sensitive and accurate quantification of wild-type p53 protein is of great importance for biological research and clinical diagnosis. Herein, a modification-free amperometric biosensor was proposed for sensitive detection of wild-type p53 protein by the signal amplification of silver nanoparticles (AgNPs) networks formed in situ on electrode surface. Double-stranded DNA (dsDNA) probe containing two consensus sites was immobilized on gold electrode surface to capture wild-type p53 protein. The cysteine thiol and amine groups on the exterior of the protein allowed for the attachment of bare AgNPs through the AgS or AgN interactions. Meanwhile, benzene-1,4-dithiol (BDT) molecules in solution triggered the assembly of more AgNPs on electrode surface through the AgS interactions, thus leading to the in situ formation of AgNPs networks for signal amplification. The target at the concentration as low as 0.1 pM can be readily determined. This method was further applied to determine wild-type p53 protein in spiked human serum and cell lysates with satisfactory results. Moreover, the biosensor is regenerative and does not require the modification of AgNPs with recognition element for signal readout. The modification-free strategy can potentially be applied to develop novel biosensors for detection of other biological macromolecules.

Applications of Graphene Quantum Dots in Biomedical Sensors

Due to the proliferative cancer rates, cardiovascular diseases, neurodegenerative disorders, autoimmune diseases and a plethora of infections across the globe, it is essential to introduce strategies that can rapidly and specifically detect the ultralow concentrations of relevant biomarkers, pathogens, toxins and pharmaceuticals in biological matrices. Considering these pathophysiologies, various research works have become necessary to fabricate biosensors for their early diagnosis and treatment, using nanomaterials like quantum dots (QDs). These nanomaterials effectively ameliorate the sensor performance with respect to their reproducibility, selectivity as well as sensitivity. In particular, graphene quantum dots (GQDs), which are ideally graphene fragments of nanometer size, constitute discrete features such as acting as attractive fluorophores and excellent electro-catalysts owing to their photo-stability, water-solubility, biocompatibility, non-toxicity and lucrativeness that make them favorable candidates for a wide range of novel biomedical applications. Herein, we reviewed about 300 biomedical studies reported over the last five years which entail the state of art as well as some pioneering ideas with respect to the prominent role of GQDs, especially in the development of optical, electrochemical and photoelectrochemical biosensors. Additionally, we outline the ideal properties of GQDs, their eclectic methods of synthesis, and the general principle behind several biosensing techniques.

Quantum dots as nanolabels for breast cancer biomarker HER2-ECD analysis in human serum

Early detection of cancer increases the possibility for an adequate and successful treatment of the disease. Therefore, in this work, a disposable electrochemical immunosensor for the front-line detection of the ExtraCellular Domain of the Human Epidermal growth factor Receptor 2 (HER2-ECD), a breast cancer biomarker, in a simple and efficient manner is presented. Bare screen-printed carbon electrodes were selected as the transducer onto which a sandwich immunoassay was developed. The affinity process was detected through the use of an electroactive label, core/shell CdSe@ZnS Quantum Dots, by differential pulse anodic stripping voltammetry in a total time assay of 2 h, with an actual hands-on time of less than 30 min. The proposed immunosensor responded linearly to HER2-ECD concentration within a wide range (10-150 ng/mL), showing acceptable precision and a limit of detection (2.1 ng/mL, corresponding to a detected amount (sample volume = 40 μL) of 1.18 fmol) which is about 7 times lower than the established cut-off value (15 ng/mL). The usefulness of the developed methodology was tested through the analysis of spiked human serum samples. The reliability of the presented biosensor for the selective screening of HER2-ECD was confirmed by analysing another breast cancer biomarker (CA15-3) and several human serum proteins.

Graphene Quantum Dot-Based Electrochemical Immunosensors for Biomedical Applications

In the area of biomedicine, research for designing electrochemical sensors has evolved over the past decade, since it is crucial to selectively quantify biomarkers or pathogens in clinical samples for the efficacious diagnosis and/or treatment of various diseases. To fulfil the demand of rapid, specific, economic, and easy detection of such biomolecules in ultralow amounts, numerous nanomaterials have been explored to effectively enhance the sensitivity, selectivity, and reproducibility of immunosensors. Graphene quantum dots (GQDs) have garnered tremendous attention in immunosensor development, owing to their special attributes such as large surface area, excellent biocompatibility, quantum confinement, edge effects, and abundant sites for chemical modification. Besides these distinct features, GQDs acquire peroxidase (POD)-mimicking electro-catalytic activity, and hence, they can replace horseradish peroxidase (HRP)-based systems to conduct facile, quick, and inexpensive label-free immunoassays. The chief motive of this review article is to summarize and focus on the recent advances in GQD-based electrochemical immunosensors for the early and rapid detection of cancer, cardiovascular disorders, and pathogenic diseases. Moreover, the underlying principles of electrochemical immunosensing techniques are also highlighted. These GQD immunosensors are ubiquitous in biomedical diagnosis and conducive for miniaturization, encouraging low-cost disease diagnostics in developing nations using point-of-care testing (POCT) and similar allusive techniques.

Disposable impedance-based immunosensor array with direct-laser writing platform

Immunoassay is a powerful technique to identify and quantify biological molecules, which base on the specificity and selectivity of antigen-antibody interaction. Impedance-based immunosensor has recently shown a great potential to provide rapid and label-free detections. However, the conventional impedance-based immunosensors rely on dedicated electrochemical measurement interface which involves expensive fabrication procedures such as gold deposition and photolithography. In this work, we propose an ultra-low-cost and high processing efficiency platform for impedance-based immunosensing. With effortless operations of direct-laser-writing, an impedance-based immunoassay can be fabricated within 5 min in standard laboratories. The as-fabricated devices have shown great stability and a high device-to-device uniformity. In order to further validate impedance sensing system's performance, finite element analysis and impedance equivalent model analysis were performed. The measured data was consistent with the simulation results. With the standard gold electrodes surface bio-functionalization procedures, the disposable immunoassay can detect anti-IgG down to 10 ng/ml.

Dengue virus: a review on advances in detection and trends - from conventional methods to novel biosensors

Dengue virus is an important arbovirus infection which transmitted by the Aedes female mosquitoes. The attempt to control and early detection of this infection is a global public health issue at present. Because of the clinical importance of its detection, the main focus of this review is on all of the methods that can offer the new diagnosis strategies. The advantages and disadvantages of reported methods have been discussed comprehensively from different aspects like biomarkers type, sensitivity, accuracy, rate of detection, possibility of commercialization, availability, limit of detection, linear range, simplicity, mechanism of detection, and ability of usage for clinical applications. The optical, electrochemical, microfluidic, enzyme linked immunosorbent assay (ELISA), and smartphone-based biosensors are the main approaches which developed for detection of different biomarkers and serotypes of Dengue virus. Future efforts in miniaturization of these methods open the horizons for development of commercial biosensors for early-diagnosis of Dengue virus infection. Graphical abstract Transmission of Dengue virus by the biting of an Aedes aegypti mosquito, the symptoms of Dengue hemorrhagic fever and the structure of Dengue virus and application of biosensors for its detection.

Targeted polyethylenimine/(p53 plasmid) nanocomplexes for potential antitumor applications

The development of the tumor-targeting ability of nanocarriers is of paramount importance for gene delivery into tumor lesions as well as to avoid biotoxicity. Here we report the synthesis of the polyethyleneimine-fluorescein isothiocyanate-folic acid (PEI-FITC-FA) polymer, which could condense the tumor suppressor pp53 to form nanocomplexes. These targeted nanocomplexes exhibited favorable physical properties including a small size of <100 nm, exploiting the enhanced permeability and retention effect and tumor-targeting ability by binding to the overexpressed FA receptors on tumor cell surfaces. In addition, once the nanocomplexes are accumulating in the tumor tissue, the target functional ligand, FA, can selectively recognize the over-expressed FA receptor and subsequently remain on the tumor cell surface, which can significantly promote the tumor cell uptake because of the time- and concentration-dependent internalization caused by the enhanced interaction between nanocomplex and tumor cell. Our results indicated that PEI-FITC-FA/pp53 nanocomplexes could be efficiently delivered into tumor cells, and subsequently induce tumor cell apoptosis. Thus, the targeted cationic polymer PEI-FITC-FA could be used as an advanced nanocarrier for gene delivery.

Cross-linked chitosan/thiolated graphene quantum dots as a biocompatible polysaccharide towards aptamer immobilization

Chitosan has a number of commercial and possible biomedical uses. Chitosan as a polysaccharide is a bioactive polymer with a variety of applications due to its functional properties such as antibacterial activity, non-toxicity, ease of modification, and biodegradability. In this work, cross-linked chitosan/thiolated graphene quantum dot as a biocompatible polysaccharide was modified by gold nanoparticle and used for immobilization of ractopamine (RAC) aptamer. A highly specific DNA-aptamer (5'-SH-AAAAAGTGCGGGC-3'), selected to RAC was immobilized onto thiolated graphene quantum dots (GQDs)-chitosan (CS) nanocomposite modified by gold nanostructures (Au NSs) and used for quantification of RAC. Different shapes of gold nanostructures with various sizes from zero-dimensional nanoparticles to spherical structures were prepared by one-step template-assistant green electrodeposition method. Fully electrochemical methodology was used to prepare a new transducer on a glassy carbon surface which provided a high surface area to immobilize a high amount of the aptamer. Therefore, a label free electrochemical (EC) apta-assay for ultrasensitive detection of RAC was developed. A special immobilization media consisting of Au NSs/GQDs-CS/Cysteamine (CysA) was utilized to improve conductivity and performance of the biosensor. The RAC aptamer was attached on the Au NSs of the composite membrane via AuS bond. The fabrication process of the EC aptamer based assay was characterized by some electrochemical techniques. The peak currents obtained by differential pulse voltammetry decreased linearly with the increasing of RAC concentrations and the apta-assay responds approximately over a wide dynamic range of RAC concentration from 0.0044 fM to 19.55 μM. The low limit of quantification was 0.0044 fM.

Non-enzymatic Determination of L-Proline Amino Acid in Unprocessed Human Plasma Sample Using Hybrid of Graphene Quantum Dots Decorated with Gold Nanoparticles and Poly Cysteine: A Novel Signal Amplification Strategy

An innovative electrochemical interface for quantitation of L-proline (L-Pro) based on ternary amplification strategy was fabricated. In this work, gold nanoparticles prepared by soft template methodology were immobilized onto green and biocompatible nanocomposite containing poly as a conductive matrix and graphene quantum dots as the amplification element. Therefore, a novel multilayer film based on poly-L-cysteine, graphene quantum dots (GQDs), and gold nanoparticles (GNPs) was exploited to develop a highly sensitive electrochemical sensor for the detection of L-Pro. Fully electrochemical methodology was used to prepare a new transducer on a glassy carbon electrode, which provided a high surface area towards sensitive detection of L-Pro. The prepared electrode was employed for the detection of L-Pro. Under optimized conditions, the calibration curve for L-Pro concentration was linear in 0.5 nM - 10 mM with a low limit of quantification of 0.1 nM. The practical analytical utility of the modified electrode was illustrated by determination of L-Pro in unprocessed human plasma samples.

Ultrasensitive immunoassay of carcinoma antigen 125 in untreated human plasma samples using gold nanoparticles with flower like morphology: A new platform in early stage diagnosis of ovarian cancer and efficient management

Ovarian cancer, as one of the most life-threatening malignancies among women worldwide, is usually diagnosed at the late stage despite up regulation of molecular markers such as carcinoma antigen 125 (CA 125) at the early stages of the malignancy. CA 125 is the only tumor marker recommended for clinical use in the diagnosis and management of ovarian cancer. The potential role of CA-125 for the early detection of ovarian cancer is controversial and has not yet been adopted for widespread screening efforts in asymptomatic women. Therefore, early detection of CA 125 in human biofluids is highly demanded. In the present study, a novel method was proposed for the fabrication of electrochemical immunosensor based reduced graphene oxide (RGO). Cysteamine capped gold nanoparticle (Cys-AuNPs) were deposited over the surface of ERGO probe using electrophoretic deposition method. These Cys-AuNPs/ERGO probes provide the favorable sites to attach the monoclonal antibody specific to CA 125 antigen. Cyclic voltammetry (CV), and square wave voltammetry (SWV) were applied for the electrochemical recognition of the biolayer. The represented signals demonstrates excellent figure of merits and good capability of the engineered immunosensor towards sensitive detection of CA 125. Quantitative measurements of CA 125 in human plasma samples have been demonstrated, showing the potential of the practical application of this novel immunosensor for the analysis of this biomarker in blood serum samples. This immunosensor has the ability of direct electron transfer as compared to earlier reported electrochemical immunosensors based electrochemical methods. Further, this immunosensor provides a very suitable and convenient alternative to replace the expensive commercially available methods such as immunohistochemistry. The following regression equation between the electrochemical current response and the CA 125 concentration range from 0.1 to 400 U/mL was found. The low limit of quantification for this immunosensor was 0.1 U/mL. To the best of our knowledge, this is the first reported on the direct immobilization of antibody on the surface of Cys-AuNPs/ERGO for fabrication of immunosensors.

Electrochemical monitoring of aflatoxin M1 in milk samples using silver nanoparticles dispersed on α-cyclodextrin-GQDs nanocomposite

Aflatoxins are potential food pollutants produced by fungi. One of important toxins is aflatoxin M1 (AFM1). A great deal of concern is associated with AFM1 toxicity. In the present study, an innovative electrochemical interface for quantitation of AFM1 based on ternary signal amplification strategy was fabricated. In this work, silver nanoparticles was electrodeposited onto green and biocompatible nanocomposite containing α-cyclodextrin as conductive matrix and graphene quantum dots as amplification element. Therefore, a multilayer film based on α-cyclodextrin, graphene quantum dots, and silver nanoparticles was exploited to develop a highly sensitive electrochemical sensor for detection of AFM1. Fully electrochemical methodology was used to prepare a transducer on a glassy carbon electrode, which provided a high surface area toward sensitive detection of AFM1. The surface morphology of electrode surface was characterized by high-resolution field emission scanning electron microscope. The proposed sensing platform provides a simple tool for AFM1 detection. Under optimized condition, the calibration curve for AFM1 concentration was linear in 0.015mM to 25mM with low limit of quantification of 2μM. The practical analytical utility of the modified electrode was illustrated by determination of AFM1 in unprocessed milk samples.