Structural and rheological studies of a polysaccharide mucilage from lacebark leaves (Hoheria populnea A. Cunn.)

Effect of enzymatic modification on the structure and rheological properties of diluted alkali-soluble pectin fraction rich in RG-I

This study focuses on pectin covalently linked in cell walls from two sources, apples and carrots, that was extracted using diluted alkali, and it describes changes in the rheological properties of diluted alkali-soluble pectin (DASP) due to enzymatic treatment. Given DASP's richness of rhamnogalacturonan I (RG-I), RG-I acetyl esterase (RGAE), rhamnogalacturonan endolyase (RGL), and arabinofuranosidase (ABF) were employed in various combinations for targeted degradation of RG-I pectin chains. Enzymatic degradations were followed by structural studies of pectin molecules using atomic force microscopy (AFM) as well as measurements of rheological and spectral properties. AFM imaging revealed a significant increase in the length of branched molecules after incubation with ABF, suggesting that arabinose side chains limit RG-I aggregation. Structural modifications were confirmed by changes in the intensity of bands in the pectin fingerprint and anomeric region on Fourier transform infrared spectra. ABF treatment led to a decrease in the stability of pectic gels, while the simultaneous use of ABF, RGAE, and RGL enzymes did not increase the degree of aggregation compared to the control sample. These findings suggest that the association of pectin chains within the DASP fraction may rely significantly on intermolecular interactions. Two mechanisms are proposed, which involve side chains as short-range attachment points or an extended linear homogalacturonan conformation favoring inter-chain interactions over self-association.

Mucilage polysaccharide as a plant secretion: Potential trends in food and biomedical applications

Current trends are shifting away from using synthetic compounds in favor of discovering new natural component sources that will allow them to create goods that are healthful, environmentally friendly, sustainable, and profitable. The food industry, in light of these trends, has opted to look for safe natural ingredients that will allow the production of low-fat, artificial-additive-free, gluten-free, prebiotic, and fortified foods. Similarly, the pharmaceutical and medical industries have attempted to apply natural ingredients to address the challenges related to biomaterials more efficiently than synthetic ingredients. Against this background, plant mucilage has proven to be a polysaccharide with excellent health features and technological properties, useful for both food and biomedical applications. Many studies have shown that its inclusion in different food matrices improves the quality of the products obtained under appropriate reformulations. At the same time, plant mucilage has been indicated to be a very interesting matrix in biomedical field especially tissue engineering applications since it has been emerged to favor tissue regeneration with its highly biocompatible structure. This concise review discusses the most recent advances of the applications of plant mucilage in different foods as well as its recent use in biomedical field. In this context, firstly, a general definition of mucilage was made and information about plant-based mucilage, which is frequently used, about the plant parts they are found in, their content and how they are obtained are presented. Then, the use of mucilage in the food industry including bakery products, meat emulsions, fermented dairy products, ice cream, and other foods is presented with case studies. Afterwards, the use of plant mucilage in the biomedical field, which has attracted attention in recent years, especially in applications with tissue engineering approach such as scaffolds for tissue regeneration, wound dressings, drug delivery systems and pharmaceutical industry was evaluated.

Premna microphylla Turcz pectin protected UVB-induced skin aging in BALB/c-nu mice via Nrf2 pathway

Excessive exposure to ultraviolet B (UVB) irradiation is one of the major risk factors for skin photoaging. The aim of this study was to investigate the protective effect of Premna microphylla Turcz pectin (PMTP) against UVB-induced skin aging in BALB/c-nu mice. PMTP was characteristic of a low methoxyl RG-I pectin with Mw was 26.60 kDa, mainly composed of galacturonic acid. PMTP-containing cream efficiently inhibited the water loss, epidermal hyperplasia, matrix metalloproteinases-1 (MMP-1), and collagen destruction in UVB-induced skin injury mice. Additionally, topical administration of PMTP-containing cream significantly increased protein levels of the nuclear factor erythroid 2-related factor 2 (Nrf2), Kelch-like ECH-associated protein 1 (Keap1), macrophage-activating factor (Maf), and heme oxygenase 1 (HO-1), and the expression of antioxidant enzymes including superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GSH-Px). In contrast, application of PMTP-containing cream on mice skin decreased the protein levels of nuclear factor-kappa B (NF-κB), inhibitor kappa B kinase β (IKKβ), and cyclooxygenase-2 (COX-2), and pro-inflammatory cytokines. Taken togethmier, these findings suggest that PMTP might protect UVB-induced skin aging via activating Nrf2 pathway and suppressing NF-κB pathway.

In Vitro Fermentation of Browsable Native Shrubs in New Zealand

Information on the nutritive value and in vitro fermentation characteristics of native shrubs in New Zealand is scant. This is despite their potential as alternatives to exotic trees and shrubs for supplementary fodder, and their mitigation of greenhouse gases and soil erosion on hill-country sheep and beef farms. The objectives of this study were to measure the in vitro fermentation gas production, predict the parameters of the in vitro fermentation kinetics, and estimate the in vitro fermentation of volatile fatty acids (VFA), microbial biomass (MBM), and greenhouse gases of four native shrubs (Coprosma robusta, Griselinia littoralis, Hoheria populnea, and Pittosporum crassifolium) and an exotic fodder tree species, Salix schwerinii. The total in vitro gas production was higher (p < 0.05) for the natives than for the S. schwerinii. A prediction using the single-pool model resulted in biologically incorrect negative in vitro total gas production from the immediately soluble fraction of the native shrubs. However, the dual pool model better predicted the in vitro total gas production and was in alignment with the measured in vitro fermentation end products. The in vitro VFA and greenhouse gas production from the fermentation of leaf and stem material was higher (p < 0.05), and the MBM lower (p < 0.05), for the native shrubs compared to the S. schwerinii. The lower in vitro total gas production, VFA, and greenhouse gases production and higher MBM of the S. schwerinii may be explained by the presence of condensed tannins (CT), although this was not measured and requires further study. In conclusion, the results from this study suggest that when consumed by ruminant livestock, browsable native shrubs can provide adequate energy and microbial protein, and that greenhouse-gas production from these species is within the ranges reported for typical New Zealand pastures.

Structure and functionality of Rhamnogalacturonan I in the cell wall and in solution: A review

Rhamnogalacturonan I (RG-I) belongs to the pectin family and is found in many plant cell wall types at different growth stages. It plays a significant role in cell wall and plant biomechanics and shows a gelling ability in solution. However, it has a significantly more complicated structure than smooth homogalacturonan (HG) and its variability due to plant source and physiological state contributes to the fact that RG-I's structure and function is still not so well known. Since functionality is a product of structure, we present a comprehensive review concerning the chemical structure and conformation of RG-I, its functions in plants and properties in solutions.

Structure and rheology of pectic polysaccharides from baobab fruit and leaves

Linkage patterns and relaxation dynamics of baobab (Adansonia digitata) polysaccharides have been investigated by means of linkage analysis and rheometry. The fruit polysaccharide was mostly xylogalacturonan, with co-extracted α-glucan. The leaf polysaccharide consists predominantly of two domains, one branched at O-4 of the →2)-Rhap-(1→ residues and another branched at O-3 of the →4)-GalpA-(1→ backbone to single GlcpA-(1→ residues. Master curves of viscoelasticity of fruit polysaccharides manifested strong pH-dependency. At pH below the dissociation constant of galacturonic acid, dispersions showed liquid-like behaviour. In contrast, at neutral pH, a weak gel network formation was observed that destabilised rapidly under the influence of flow fields. The present work identifies xylogalacturonans from baobab fruit as polysaccharides with unique rheological characteristics that may point to new directions in food and pharmaceutical formulation.

Application of plant mucilage polysaccharides and their techno-functional properties' modification for fresh produce preservation

The use of edible coating/film to improve fresh produce's quality and shelf life is an old but reliable and popular method of preservation. Recently, plant-derived mucilages have been extensively used to prepare edible packages (MEPs). This review focuses on recent studies that characterize mucilages from different plants, and examine their specific applications as edible packages in preserving fruits and vegetables. Structure-function relations and corresponding influence on film-forming properties are discussed. This review also surveys the additive-modifications of MEPs techno-functional properties. MEPs from a range of plant sources are effective in preventing quality loss and improving the storability of various fruits and vegetables. The preservative mechanisms and essential techno-functional properties of MEPs required for fruit and vegetable packaging were summarized. The key findings summarized in this study will help promote the utilization of mucilages and draw attention to other novel applications of this valuable polymer.

Isolation and structure characterization of glucuronoxylans from Dolichos lablab L. hull

Polysaccharides were extracted by hot water and alkali in sequence from Dolichos lablab L. hull, and further purified by ion-exchange and gel columns. Hot water extracted D. lablab hull polysaccharide (DLHP) was rich in glucuronoxylan and pectin, and alkali extracted polysaccharide (DLHAP) mostly embraced glucuronoxylan. The structures of purified glucuronoxylans from DLHP and DLHAP were mainly analyzed by HPAEC-PAD, methylation combined with GC-MS, NMR and SEC-MALLS. DLHP-1 was identified as acetylated glucuronoxylan containing →4)-β-Xylp-(1→ backbone with substitution at O-2 site by α-GlcpA/4-O-methyl-α-GlcpA. The molar ratio of β-Xylp to α-GlcpA was 6.9:1, and acetylation was mainly at O-3 site of β-Xylp with acetylation degree of 21.5%. DLHP-1 and DLHP-2 had similar physicochemical properties, except for molecular weight (M_w). DLHAP-1 was the non-methylated glucuronoxylan almost without acetylation, and it had the molar ratio of β-Xylp to α-GlcpA of 5.6:1. Besides, DLHP-1 (M_w of 20.0 × 10³ g mol^-1) adopted semi-flexible chain, while DLHAP-1 (M_w of 15.4 × 10³ g mol^-1) showed flexible chain. These results provided a structural basis for study on polysaccharides from D. lablab hull, which was benefit for understanding biological activities and developing functional food or pharmaceuticals of D. lablab.

Characterization, prebiotic and immune-enhancing activities of rhamnogalacturonan-I-rich polysaccharide fraction from molokhia leaves

Plant-derived polysaccharides possess potential health benefits that improve intestinal health and the immune system. Molokhia leaves have a large amount of mucilage polysaccharide; in the present study, crude polysaccharide extract was prepared from molokhia leaves. The molecular weight of molokhia leaf polysaccharide fraction (MPF) was estimated to be 51.2 × 10³ Da. Polysaccharide was methylated and the structure of MPF was mainly composed of rhamnogalacturonan-I structure with side chains, such as galactans and linear glucan (starch), as shown by GC-MS analysis. To study the biofunctional effects of MPF, its prebiotic and intestinal immune-enhancing activities were assayed in vitro. MPF exhibited good prebiotic activity, as shown by its high prebiotic scores, and increased contents of total short-chain fatty acids on five probiotic strains. In addition, MPF showed immune-enhancing activity on Peyer's patches, as revealed by the high bone marrow cell proliferating activity and production of immunoglobulin A and cytokines. These results demonstrate that MPF may be a potential beneficial prebiotic and intestinal immune-enhancer, which may have wide implications in the food industry.

Premna microphylla Turcz leaf pectin exhibited antioxidant and anti-inflammatory activities in LPS-stimulated RAW 264.7 macrophages

Premna microphylla turcz leaf juice with polysaccharides (PMPs) as its main component, are raw material of jelly-like Chinese traditional food "Guanyin tofu", which were also experiencedly used to relieve inflammation-related symptoms. Here three kinds of PMPs were extracted in alkaline (APMP), water (WPMP) and acidic (HPMP) conditions, being characteristic of RG I, high- and low-methoxyl HG pectin, respectively, in amorphous form with diverse surface microstructures, among which APMP predominantly composed of Glucose instead of galacturonic acid, showing wider molecular weight distribution and more branched chains. PMPs showed remarkable radical scavenging capability, and especially APMP at concentrations above 50 μg/mL effectively inhibited the reactive oxygen species and malondialdehyde production in LPS-stimulated RAW 264.7 macrophages, by enhancing enzymatic activities of endogenous superoxide dismutase, glutathione peroxidase and catalase, and accordingly alleviated inflammatory cytokines. Thus, PMPs could be promising non-toxic natural dietary supplement to improve chronic inflammation-induced diseases.

Optimization of ultrasound-assisted extraction of polysaccharides from perilla seed meal by response surface methodology: Characterization and in vitro antioxidant activities

In this study, response surface methodology was employed to optimize the ultrasound-assisted extraction (UAE) process of perilla seed meal polysaccharides (PSMP). The optimal conditions for UAE of PSMP were: liquid-solid ratio of 26.00 mL/g, ultrasonic temperature of 43.00 °C, ultrasonic time of 52.00 min, and ultrasonic power of 229.00 W, the optimal conditions lead to an yield of 6.137 ± 0.062%. The structural characteristics of molecular weight, compositional monosaccharides, and glycosidic linkages were determined by size exclusion chromatography with multiangle light scattering, gas chromatography-mass spectrometry, Fourier-transfer infrared spectroscopy, and nuclear magnetic resonance detections. Scanning electron microscopy analysis showed that many holes were formed on the surface of PSM after UAE. The antioxidant activities of PSMP were investigated using various assays in vitro. The results suggested that PSMP is potential natural resource of antioxidants for medicine and functional foods. PRACTICAL APPLICATION: The selection of raw material perilla seed meal is conducive to the comprehensive utilization of edible resources. With consumer demands for newly developed foods with natural, wholesome ingredients are increasing nowadays. This study provides effective reference for in-depth research on other medicine-food dual-use resources. Ultrasound-assisted extraction (UAE) is a promising alternative method for hot water reflux extraction (HWRE) of polysaccharides for advantages of high efficiency and energy saving. In this work, the UAE process optimized by response surface methodology is more suitable for industrial application that can effectively decrease total cost of production by reducing the extraction temperature, shortening extraction time, and increasing raw material utilization.

Structural elucidation of an immunological arabinan from the rhizomes of Ligusticum chuanxiong, a traditional Chinese medicine

In the present study, an immunological arabinan, LCP70-2A, was isolated from Ligusticum chuanxiong for the first time. The absolute molecular weight of LCP70-2A was determined to be 6.46 × 10⁴ g/mol using the HPSEC-MALLS-RID method. The absolute configuration of arabinose in LCP70-2A was determined to be L-configuration. Physicochemical characterization revealed that LCP70-2A was a homogeneous polysaccharide and had a backbone of (1 → 5)-linked α-L-Araf with terminal α-L-arabinose residues at position O-2 and O-3. Molecular conformation analysis showed that LCP70-2A was a branching polysaccharide with a compact coil chain conformation in 0.1 M NaCl solution. In addition, in vitro cell assays showed that LCP70-2A can activate macrophages by enhancing the phagocytosis and potentiating the secretion of immunoregulatory factors including NO, TNF-α, IL-6, and IL-1β. Furthermore, LCP70-2A was proved to promote the production of ROS and NO using the zebrafish model, suggesting that LCP70-2A can be further developed as a candidate supplement for immunological enhancement.

Arabinoxylan and rhamnogalacturonan mucilage: Outgoing and potential trends of pharmaceutical, environmental, and medicinal merits

Demand for safe, environmentally friendly and minimally processed food additives with intrinsic technological (stabilizing, texturizing, structuring) and functional potential is already on the rise. There are actually several natural excipients eligible for pharmaceutical formulation. Mucilage, as a class constitutes arabinoxylan and rhamnogalacturonan-based biomolecules used in the pharmaceutical, environmental as well as phytoremediation industries owing to its particular structure and properties. These compounds are widely used in pharmaceutical, food and cosmetics, as well as, in agriculture, paper industries. This review emphasizes mucilage valuable applications in the pharmaceutical and industrial fields. In this context, much focus has recently been given to the valorization of mucilage as an ingredient for food or nutraceutical applications. Furthermore, different optimization and extraction techniques are presented to develop better utilization and/or enhanced yield of mucilage. The highlighted mucilage extraction methods warrant assessing up-scale processes to encourage for its industrial applications. The current article capitalizes on cutting-edge characteristics of mucilage and posing for other possible innovative applications in non-food industries. Here, the first holistic overview of mucilage with regards to its physicochemical properties and potential novel usages is presented.

Effect of Mesona chinensis polysaccharide on the pasting, rheological, and structural properties of tapioca starch varying in gelatinization temperatures

The effects of Mesona chinensis polysaccharide (MCP) on the pasting, rheological properties, granule size, and water mobility of tapioca starch (TS) were investigated at different gelatinization temperatures (75 °C and 95 °C). The structures of tapioca starch-Mesona chinensis polysaccharide (TM) gels formed at different gelatinization temperatures were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results showed that the peak, trough, and final viscosities of TM-95 mixtures were lower than that of TM-75 mixtures. Addition of MCP had a significant reduce (p < 0.05) on the granule size and transversal relaxation time of TM mixtures at the two gelatinization temperatures. Rheological analysis also showed that the addition of MCP increased the consistency indexes (K) and decreased the flow behavior indexes (n) of TM-95 and TM-75 gels. XRD results confirmed the diffraction peak of TM-95 gels became blunt and wider, and the diffraction peak at 17° and 23° of TM-75 gels could be observed after MCP added. In addition, the microstructures of TM-75 gels were more compact than that of TM-95 gels. These results can promote the development of TS-based products and application of MCP at different gelatinization temperatures.

Pectin recovery and characterization from lemon juice waste streams

BACKGROUND

Pectin characteristics from different parts of lemon fruit (Citrus limon L.) were studied as a basis for assessing their suitability for functional applications. Pectin was extracted from lemon albedo, lemon core parts and membranes, and lemon extract using an aqueous extraction protocol. The composition and structural properties of the isolated pectins were examined by means of complementary analytical methods to assess their molecular characteristics for potential industrial applications.

RESULTS

The isolation protocol yielded pectins that were predominantly composed of galacturonic acid, with differences in the degree of methylation and neutral sugars content, and with low protein content, indicating high-purity materials. The same extraction protocol resulted in differences in yield and purity between the three different parts of lemon fruit, and in structural variations in the pectin backbone, as evidenced by differences in sugar composition and molecular weight. Solutions of the isolated lemon pectins exhibited pseudoplastic behavior. Macromolecular characterization showed that the lemon extract pectin had the highest molecular weight and hydrodynamic volume, followed by lemon core and lemon albedo pectin.

CONCLUSION

The work demonstrates that pectins with distinct structural properties may be extracted from different parts of lemon wastes and used for different technological purposes. © 2019 Society of Chemical Industry.

Rethinking the impact of RG-I mainly from fruits and vegetables on dietary health

Rhamnogalacturonan I (RG-I) pectin is composed of backbone of repeating disaccharide units →2)-α-L-Rhap-(1→4)-α-D-GalpA-(1→ and neutral sugar side-chains mainly consisting of arabinose and galactose having variable types of linkages. However, since traditional pectin extraction methods damages the RG-I structure, the characteristics and health effects of RG-I remains unclear. Recently, many studies have focused on RG-I, which is often more active than the homogalacturonan (HG) portion of pectic polysaccharides. In food products, RG-I is common to fruits and vegetables and possesses many health benefits. This timely and comprehensive review describes the many different facets of RG-I, including its dietary sources, history, metabolism and potential functionalities, all of which have been compiled to establish a platform for taking full advantage of the functional value of RG-I pectin.

Polysaccharides from New Zealand Native Plants: A Review of Their Structure, Properties, and Potential Applications

Water-soluble, non-starch polysaccharides from plants are used commercially in a wide range of food and non-food applications. The increasing range of applications for natural polysaccharides means that there is growing demand for plant-derived polysaccharides with different functionalities. The geographical isolation of New Zealand and its unique flora presents opportunities to discover new polysaccharides with novel properties for a range of applications. This review brings together data published since the year 2000 on the composition and structure of exudate gums, mucilages, and storage polysaccharides extracted from New Zealand endemic land plants. The structures and properties of these polysaccharides are compared with the structures of similar polysaccharides from other plants. The current commercial use of these polysaccharides is reviewed and their potential for further exploitation discussed.

Chemical and rheological properties of proteoglycans from Sarcandra glabra (Thunb.) Nakai

Two proteoglycans (HPP and LPP) with different ratios of protein/polysaccharide were extracted from S. glabra. The chemical compositions, relative average molecular weights, monosaccharide compositions, FT-IR spectra, and rheological properties of the two proteoglycans were determined. The results exhibited that the two proteoglycans had pseudoplastic fluids properties and displayed shear-thinning behavior. The apparent viscosity of the two proteoglycans both increased with increasing concentrations. The temperature had different effects on the viscosity of the two proteoglycans. As temperature increased from 25 to 85 °C, the viscosity of LPP descended while the HPP's viscosity rose first and then dropped slightly. The effects of CaCl₂ addition on the two samples were like that of the temperature. The viscosities of HPP and LPP had different tolerances to acidity and alkalinity. HPP solution was more sensitive to pH changes due to its high protein content. The addition of sucrose increased the viscosities of samples. The modulus G' and G″ of HPP and LPP were increased with the increase of oscillation frequency, while the crossover points of G' and G″ values decreased with the increasing concentrations of HPP and LPP. The above data presented that the two proteoglycans could be promising candidates for food industries and pharmacological applications.

Production of electrospun nanofibers based on graphene oxide/gum Arabic

Over the last few years, the electrospinning technique has attracted significant attention for the production of novel nanofibrous materials. At the same time, the use of graphene oxide and the natural products extracted from plants and/or trees have become very popular in various fields of science. In this work, a new method for the production of nanofibers based on a combination of Gum Arabic (GA), as a natural tree gum exudate, PVA, as an environmentally-friendly stabilizer, and graphene oxide (GO) has been developed and characterized. SEM analysis showed fundamental differences on the surface of bare nanofibers with and without GO, and also significantly smaller fiber diameters in the case of the presence of GO (fibers <100 nm present). Raman spectroscopy confirmed and TGA analysis approximated the content of GO in the nanofibers. Adsorption of methylene blue on the produced nanofibrous membrane was about 50% higher in the presence of GO, which opens the possibility to use GO/GA/PVA fibers in several applications, for example for the removal of dyes.