Poly(2-acrylamido-2-methylpropane sulfonic acid) grafted magnetic chitosan microspheres: Preparation, characterization and dye adsorption

Synthesis and fabrication of magnetically separable phosphate-modified magnetic chitosan composites for lead(II) selective removal from wastewater

To address the urgent need for efficient removal of lead-containing wastewater and reduce the risk of toxicity associated with heavy-metal wastewater contamination, materials with high removal rates and easy separation must be developed. Herein, a novel organic-inorganic hybrid material based on phosphorylated magnetic chitosan (MSCP) was synthesized and applied for the selective removal of lead (II) from wastewater. From the characterization and the experimental results can be obtained that the magnetic saturation strength of MSCP reaches 14.65 emu/g, which can be separated quickly and regenerated readily, and maintains high adsorption performance even after 5 cycles, indicating that the adsorbent possesses good magnetic separation performance and durability. Also, MSCP showed high selective adsorption performance for lead in the multiple metal ions coexistence solutions at pH 6.0 and room temperature, with an adsorption coefficient SPb-MSCP of 78.85%, which was much higher than that of MSC (the SPb-MSC was 11.59%). Additionally, in the single lead system, the sorption characteristics of Pb(II) on MSCP and MCP had obvious pH-responsiveness, and their adsorption capacity increased with the increase of solution pH, reaching the maximal values of 80.19 and 72.68 mg/g, respectively. It is noteworthy that the acid resistance of MSCP with an inert layer coated on the core is significantly improved, with almost no iron leaching from MSCP over the entire acidity range, while MCP has 7.63 mg/g of iron leaching at pH 1.0. Significantly, MSCP exhibited a maximum adsorption capacity of 102.04 mg/g, which matches the Langmuir model at pH 6.0 and 298.15 K, and points to the pseudo-second-order kinetics of the chemisorption process of Pb(II) on MSCP. These findings highlight the great potential of MSCP for Pb(II) removal from aqueous solution, making it a promising solution for Pb(II) contamination in wastewater.

Natural Polysaccharide-Based Hydrogels Used for Dye Removal

Removal of contaminants from discharge water is vital and demands urgent assistance with the goal to keep clean water. Adsorption is one of the most common, efficient, and low-priced methods used in water treatment. Various polysaccharide-based gels have been used as efficient dye adsorbents from wastewater. This review summarizes cutting-edge research of the last decade of different hydrogels based on natural polysaccharides (chitin, chitosan, cellulose, starch, pullulan, and dextran) concerning their dye adsorption efficiency. Beyond their natural abundance, attributes of polysaccharides such as biocompatibility, biodegradability, and low cost make them not only efficient, but also environmentally sustainable candidates for water purification. The synthesis and dye removal performance together with the effect of diverse factors on gels retaining ability, kinetic, and isotherm models encountered in adsorption studies, are introduced. Thermodynamic parameters, sorbent recycling capacity along with conclusions and future prospects are also presented.

Simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range by using magnetic chitosan-based biopolymer

The simultaneous reduction of Cr(VI) and sequestration of the resulting Cr(III) in one process is highly desirable as a cost-effective and environmental-friendly approach for the decontamination of Cr(VI)-polluted wastewater. However, most of the existing adsorptive materials are only effective in low pH environments (pH = 1-3), severely restricting the adsorption efficiency and cost effectiveness. Herein, we proposed a chitosan-based magnetic porous microsphere (PPy@PMCS) for simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range. Benefiting from its abundant interaction sites, Cr(VI) was effectively adsorbed on the surface and then immediately reduced to Cr(III) with much lower toxicity. Most importantly, the resulting Cr(III) was in-situ sequestrated by the complexation of chitosan matrix. As a result, PPy@PMCS exhibited a maximum Cr(VI) adsorption capacity of 330.42 mg/g at pH 2.0 and an adsorption capacity of 167.82 mg/g even at near neutral pH (6.0), which is superior to most reported adsorbents. Furthermore, the exhausted PPy@PMCS can be rapidly separated from solutions under an external magnetic field and facilely regenerated. The proposed novel biopolymer-based material shows great application potentials in wastewater treatment.

Novel poly (N-methacryloyl-L-alanine acid) grafted chitosan microspheres based solid-phase extraction coupled with ICP-MS for simultaneous detection of trace metal elements in food

Poly (N-methacryloyl-L-alanine acid) grafted tartaric acid-crosslinked chitosan microspheres (PNMA-TACS) were successfully synthesized and employed as a novel adsorbent for the separation and enrichment of metal ions in the food system. PNMA-TACS microspheres-based solid phase extraction (SPE) was coupled with ICP-MS for accurate quantification of trace V(V), Cr(III), As(III), Pb(II), Cd(II) and Cu(II). The obtained PNMA-TACS microspheres were characterized, and parameters influencing the method were optimized. Under optimal conditions, the calibration curves for Cu(II) and V(V) were linear within 0.01-30 μg L-1, the linear ranges of Cr(III), As(III), Pb(II) and Cd(II) were 0.01-15 μg L-1, and the detection limit of the developed approach was 1.1-3.7 ng L-1. The results were consistent with the consensus values of method validation implemented by two standards. Moreover, standard addition recovery experiments were performed in rice and milk powder, which achieved satisfactory recovery of 86.1-103.5%.

Chitosan-based composite hydrogel with a rigid-in-flexible network structure for pH-universal ultra-efficient removal of dye

Polysaccharide-based hydrogel adsorbents become popular because of their high adsorption capacity and fast adsorption rate, but their low removal rate and poor pH resistance have always been fatal shortcomings. Herein, a feasible strategy was proposed to strengthen the ability of hydrogel adsorbent to remove organic pollutants (i.e., dye) by incorporating natural rectorite (REC) into chitosan-g-poly (2-acrylamido-2-methyl-propane-sulfonic-acid) hydrogel network to form a rectorite-in-polymer network structure. The introduction of less dosage of REC (1.2 wt%) into the hydrogel facilitates to improve its adsorption capacities toward methylene blue (MB) in deionized water, tap water, seawater, Yangtze River water, and Yellow River water (1083.39-1303.49 mg/g); while incorporating higher content of REC (15.8 wt% REC) helps to improve the removal rate (99.6 % for MB in real waters), which are greatly superior to commercial activated carbons. The adsorbent keeps high adsorption efficiency in a broad pH range (2-11), and can be reused for >4 times.

Magnetic chitosan microspheres: An efficient and recyclable adsorbent for the removal of iodide from simulated nuclear wastewater

The efficient and recyclable magnetic chitosan microspheres (MCMs) were successfully synthesized to remove iodide from nuclear wastewater and characterized through XRD, FTIR, SEM, EDS, VSM, TGA and XPS. The characterization results indicated that the MCMs exhibited smooth spherical morphology and good magnetic properties. The removal potential of MCMs was investigated for iodide (I^-) anions at different conditions. From pH 3 to pH 9, MCMs performed the high I^- removal efficiency (>90%). The maximum I^- removal capacity of MCMs was up to 0.8087 mmol g^-1 at 298 K, well-fitting with the pseudo-second-order and Sips models. Furthermore, the I^- removal efficiency of MCMs still maintained more than 91% after five adsorption-desorption cycles, performing good regeneration and reusability. This study is expected to prompt the MCMs to become an efficient and recyclable biosorbent for iodide removal from nuclear wastewater.

Facile preparation of taurine modified magnetic chitosan nanocomposites as biodegradable adsorbents toward methylene blue

A novel magnetic Fe₃O₄@chitosan@taurine adsorbent (MCT) was prepared by surface modification of magnetic chitosan nano-composites with taurine-glutaraldehyde solution. The adsorbents were characterized by FTIR, SEM, TEM, XRD, TGA and VSM techniques, respectively. According to the FTIR spectrum of MCT, the characteristic peaks of the SO₃^-group on MCT were observed to have a shift after adsorption of the cationic dye, which indicates that there may be electrostatic attraction between the MCT and the cationic dye. Moreover, the saturation magnetization of MCT was found to be 20.797 emu g^-1, suggesting that MCT has sufficient magnetic response to meet the need of magnetic separation. The adsorption properties of cationic dyes by MCT were further investigated by using methylene blue (MB) as a representative. The adsorption behaviour of MB by MCT was well described by the pseudo-second order kinetic model and the Langmuir isotherm model, respectively. The maximum adsorption capacity of MB calculated from the Langmuir model fitting was 204.1 mg g^-1 at pH 5 and 384.6 mg g^-1 at pH 9, respectively, and the adsorption equilibrium could be reached within 10 min. Besides, the negative values of ΔG° and ΔH° suggested that the adsorption process was spontaneous and exothermic, and the good reusability indicated that MCT could act as a recyclable adsorbent for dye adsorption. All of these results illustrate that MCT has great potential for practical application in removal of cationic dyes from aqueous solutions.

Chitosan-based hybrid materials for adsorptive removal of dyes and underlying interaction mechanisms

Environmental pollution by dyes molecules has become a subject of intensive research in recent years due to their hazardous effects on human health, organisms, and animals. Effective treatment and removal of dye molecules from the environmental matrices and water sources are of supreme concern. The deployment of cheap, safe, green, sustainable, and eco-friendly materials to remove these pollutants from water is the main challenge during the last decades. Chitosan and its derivatives/composites, as a cheap, easily available, and environmentally friendly sorbent, have attracted increasing attention for the removal of dye molecules. This review article focuses on the application of chitosan and chitosan-based smart adsorbents for the removal of dyes. Recent methods for the preparation of chitosan-based composites and their application in the removal of dyes are discussed. Moreover, the possible mechanisms for the interaction of chitosan and chitosan-based adsorbents with dyes molecules were evaluated. Finally, future prospects of using chitosan as an adsorbent for the removal of dye molecules are directed.

A review on the synthesis of graft copolymers of chitosan and their potential applications

Chitosan is an antimicrobial, biodegradable and biocompatible natural polymer, commercially derived from the partial deacetylation of chitin. Currently modified chitosan has occupied a major part of scientific research. Modified chitosan has excellent biotic characteristics like biodegradation, antibacterial, immunological, metal-binding and metal adsorption capacity and wound-healing ability. Chitosan is an excellent candidate for drug delivery, food packaging and wastewater treatment and is also used as a supporting object for cell culture, gene delivery and tissue engineering. Modification of pure chitosan via grafting improves the native properties of chitosan. Chitosan grafted copolymers exhibit high significance and are extensively used in numerous fields. In this review, modifications of chitosan through several graft copolymerization techniques such as free radical, radiation, and enzymatic were reported and the properties of grafted chitosan were discussed. This review also discussed the applications of grafted chitosan in the fields of drug delivery, food packaging, antimicrobial, and metal adsorption as well as dye removal.

Two-step synthesis of a single-layer grafting self-floating adsorbent for anionic dyes adsorption, surface separation and concentration

In the case of a sharp increase in the price of dyes, the dyes concentration of in wastewater is important for environmental protection and industrial costs reduction. In this study, we grafted single-layer amino groups onto the surface of the hollow glass microspheres by a two-step simple synthesis, and the anionic dyes adsorption process reaches equilibrium within 10 min. The as-synthesized adsorbent has self-floating ability to achieve high-efficiency surface solid-liquid separation with water. SEM, EDS, S_BET, FT-IR, XPS, TGA characterizations results demonstrated the successful grafting of amino groups and the important role of the pretreatment process in the two-step synthesis. The results of adsorption isotherms and kinetics show the adsorption process belongs to single-layer adsorption with equal adsorption sites, and the adsorption capacities for acid orange 7 and amaranth reach 428.99 mg g^-1 and 145.62 mg g^-1, respectively. Regeneration of the adsorbent and concentration of the dye solutions can be achieved by dispersing the separated adsorbent in alkaline solution, the maximum concentrated concentration of acid orange 7 and amaranth was 6321.57 mg L^-1 and 2431.84 mg L^-1, respectively. This study provides new insights for the solid-liquid separation of water treatment agents and the resource regenerating of dyeing wastewater.

Functioned hollow glass microsphere as a self-floating adsorbent: Rapid and high-efficient removal of anionic dye

Rapid, high-efficient adsorbents with efficient solid-liquid separation ability has broad application prospects in the treatment of dye wastewater. In this study, polydopamine and methacryloyloxyethyltrimethyl ammonium chloride were grafted onto hollow glass microspheres to prepare the enhanced polydopamine shell structure adsorbent with self-floating ability. Furthermore, the adsorbent achieves high-efficiency surface solid-liquid separation, which overcomes the disadvantages of the traditional separation methods. Characterizations of the as-synthesized microspheres were performed using various techniques such as SEM, EDS, BET, XPS, FT-IR, TGA and XRD. The adsorbent achieved rapid and high-efficient adsorption of alizarin cyanine green F via the interactions of electrostatic attracting and π-π stacking, and under the optimal experimental conditions, the removal efficiency of 0.10 m mol L^-1 dye solution reaches 94.51%, and the adsorption process reaches equilibrium within 60 min. Adsorption isotherms and kinetics data of the adsorbent were well fitted by Langmuir isotherm and pseudo-second-order kinetic models, respectively. The as-synthesized adsorbent has excellent recyclability, and its adsorption performance can be maintained after 5 cycles of reuse. The self-floating adsorbent has great potential for the removal of dissolved contaminants and cost-effective separation.

PAMPS-graft-Ni3Si2O5(OH)4 multiwalled nanotubes as a novel nano-sorbent for the effective removal of Pb(ii) ions

The existence of Pb(ii) ions in water systems poses significant potential hazards to public health and the environment. In the present study, poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) brush-modified Ni₃Si₂O₅(OH)₄ nanotubes were prepared, and their adsorption efficiency against the Pb(ii) ions was investigated. The characterization results of FTIR spectroscopy, TGA, TEM, and XPS indicated the successful grafting of PAMPS on the surface of free Ni₃Si₂O₅(OH)₄ NTs, and the prepared PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs exhibited a 6–8 nm grafting layer, which could provide abundant binding sites for metal adsorption. During the Pb(ii) removal process, a pH-dependent adsorption behavior was observed, and the adsorption processes fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm model. Compared with unmodified Ni₃Si₂O₅(OH)₄, the PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs exhibited obviously faster adsorption of Pb(ii) and higher equilibrium adsorption capacity for the removal of Pb(ii). The maximum adsorption capacity calculated via the Langmuir isotherm model was 0.653 mmol g⁻¹ (135.3 mg g⁻¹) at 298 K. In a metal coexisting system, the total adsorption capacity of the NTs was increased; this indicated the potential of the proposed NTs in the removal of Pb(ii) from metal coexisting wastewater. This study showed the significant potential of PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs in the effective removal of Pb(ii).

PAMPS-g-Ni₃Si₂O₅(OH)₄ NTs for the effective removal of Pb(ii).

Super Effective Removal of Toxic Metals Water Pollutants Using Multi Functionalized Polyacrylonitrile and Arabic Gum Grafts

Super adsorbent polymers can be considered to be a very efficient solution for wastewater treatment. In general, their adsorption capacities depend on the type and amount of the functional groups present on the surface of the polymers, while their economic value is affected by their cost. Therefore, this study aims to understand the effect of multi-functionalization of cheap Arabic gum on the adsorption capability toward heavy metals. Graft copolymers of polyacrylonitrile (PAN) onto Arabic gum (AG) were prepared in aqueous solution using (KMnO₄/HNO₃) as a redox initiator. Chemical modification of the graft copolymer was carried out by reaction with hydrazine hydrochloride followed by hydrolysis in the basic medium. The modified graft product was characterized by various techniques, such as Fourier transform infrared spectroscopy (FTIR), elemental analysis, scanning electron microscope (SEM), and X-ray powder diffraction (XRD). The modified graft copolymer was used to adsorb Pb²⁺, Cd²⁺ and Cu²⁺ from their aqueous solutions using batch extraction. Different parameters influence the uptake behavior, including contact time, pH, and the initial concentration of the metal ions; all of these were investigated. The kinetics were investigated using the pseudo first order and pseudo second order, and the equilibrium data were analyzed using the Langmuir and Freundlich model. The modified graft product showed the superadsorbent capacity to obtain maximum values (Qmax) 1017, 413 and 396 mg/g for Pb²⁺, Cd²⁺ and Cu²⁺, respectively. Acid treatment with 0.2 M HNO₃ resulted in 96%, 99% and 99% metal recovery for the Pb²⁺, Cd²⁺ and Cu²⁺, respectively. This indicates the recyclability of product for further usage upon drying between treatments.

The Adsorption of Methylene Blue by an Amphiphilic Block Co-Poly(Arylene Ether Nitrile) Microsphere-Based Adsorbent: Kinetic, Isotherm, Thermodynamic and Mechanistic Studies

Dye pollution is a serious problem in modern society. We desired to develop an efficient adsorbent for the decontamination of discharged dyes. In this work, the polymeric microspheres derived from a kind of amphiphilic block of co-poly(arylene ether nitrile) (B-b-S-P) were prepared on the basis of “oil-in-water” (O/W) microemulsion method. The B-b-S-P microspheres were found competent to remove the cationic dye, methylene blue (MB); and various influential factors, such as contact time, initial concentration, solution pH and temperature were investigated. Results indicated that the maximum adsorption capacity of B-b-S-P microspheres for MB was 119.84 mg/g at 25 °C in neutral conditions. Adsorption kinetics and isotherm dates were well fitted to a pseudo-second-order kinetic model and the Langmuir isotherm model, and thermodynamic parameters implied that the adsorption process was endothermic. The B-b-S-P microspheres also exhibited a highly selective adsorption for cationic dye MB, even in the presence of anionic dye methyl orange (MO). In addition, the possible adsorption mechanism was studied, suggesting that the electrostatic interaction and π–π interaction could be the main force in the adsorption process.

Use of a floating adsorbent to remove dyes from water: A novel efficient surface separation method

In this study, our group grafted 2-acrylamido-2-methylpropane sulfonic acid (AMPS) onto the surface of hollow glass microspheres (HGM) and successfully prepared AMPS grafted floating adsorbent (AFA). The prepared AFA carries a large amount of negative charges, and the adsorptions of cationic dyes are achieved under the action of strong electrostatic interaction. Furthermore, due to the unique shell structure of AFA, it has a stable self-floating ability, which may change the traditional separation method to make the adsorbent easier to enrich and separate from water surface. Characterizations of AFA by scanning electron microscope, energy dispersive spectrometry, X-ray photoelectron spectroscopy. Fourier transform infrared spectra, Brunauer-Emmett-Teller surface areas, thermogravimetric analysis, and X-ray diffractometer shows the successful grafting of AMPS. Adsorption experiments confirmed that the adsorption capacities of AFA for methylene blue, malachite green, basic fuchsin and crystal violet under optimum conditions were 436.8 mg g^-1, 637.6 mg g^-1, 457.8 mg g^-1, and 399.4 mg g^-1, respectively. At the same time, AFA has excellent recyclability, and its adsorption capacity can be maintained after 6 cycles of reuse.

Insights of CMNPs in water pollution control

The various toxic contaminants such as dyes, heavy metals, pesticides, rare-earth elements, and hazardous chemicals are the major threats to all the flora and fauna. Owing to the harmful ill effects caused by the toxic contaminants, it is necessary to eliminate these compounds from the authors' ecosystem. The chitosan magnetic nanomaterials (CMNPs) are one of the superior materials used in the wastewater treatment through various conventional technologies. The chitosan is a natural source obtained from the crustacean shells of crabs, prawns etc. The magnetic nanomaterial prepared by the reinforcement of chitosan is highly effective in the removal of heavy metals, dyes, organic matter, and harmful chemicals. It is used in various technologies such as adsorption, flocculation, immobilisation, photocatalytic technology, and bioremediation. This possesses unique surface and magnetic characteristics, Moreover, it is simple, economically feasible, and eco-friendly material used efficiently in wastewater treatment. This review paper depicts the overview of CMNP in the industrial effluent treatment.

Preparation and characterization of chitosan membranes

The present study investigates a new method for preparing chitosan membranes. The thus-prepared film was moderately thick and had a smooth surface, without curling.